Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 664

Reformat results as: short short into frame detailed detailed into frame

_id	ec4d
authors	Croser, J.
year	2001
title	GDL Object
source	The Architect’s Journal, 14 June 2001, pp. 49-50
summary	It is all too common for technology companies to seek a new route to solving the same problem but for the most part the solutions address the effect and not the cause. The good old-fashioned pencil is the perfect example where inventors have sought to design-out the effect of the inherent brittleness of lead. Traditionally different methods of sharpening were suggested and more recently the propelling pencil has reigned king, the lead being supported by the dispensing sleeve thus reducing the likelihood of breakage. Developers convinced by the Single Building Model approach to design development have each embarked on a difficult journey to create an easy to use feature packed application. Unfortunately it seems that the two are not mutually compatible if we are to believe what we see emanating from Technology giants Autodesk in the guise of Architectural Desktop 3. The effect of their development is a feature rich environment but the cost and in this case the cause is a tool which is far from easy to use. However, this is only a small part of a much bigger problem, Interoperability. You see when one designer develops a model with one tool the information is typically locked in that environment. Of course the geometry can be distributed and shared amongst the team for use with their tools but the properties, or as often misquoted, the intelligence is lost along the way. The effect is the technological version of rubble; the cause is the low quality of data-translation available to us. Fortunately there is one company, which is making rapid advancements on the whole issue of collaboration, and data sharing. An old timer (Graphisoft - famous for ArchiCAD) has just donned a smart new suit, set up a new company called GDL Technology and stepped into the ring to do battle, with a difference. The difference is that GDL Technology does not rely on conquering the competition, quite the opposite in fact their success relies upon the continued success of all the major CAD platforms including AutoCAD, MicroStation and ArchiCAD (of course). GDL Technology have created a standard data format for manufacturers called GDL Objects. Product manufacturers such as Velux are now able to develop product libraries using GDL Objects, which can then be placed in a CAD model, or drawing using almost any CAD tool. The product libraries can be stored on the web or on CD giving easy download access to any building industry professional. These objects are created using scripts which makes them tiny for downloading from the web. Each object contains 3 important types of information: · Parametric scale dependant 2d plan symbols · Full 3d geometric data · Manufacturers information such as material, colour and price Whilst manufacturers are racing to GDL Technologies door to sign up, developers and clients are quick to see the benefit too. Porsche are using GDL Objects to manage their brand identity as they build over 300 new showrooms worldwide. Having defined the building style and interior Porsche, in conjunction with the product suppliers, have produced a CD-ROM with all of the selected building components such as cladding, doors, furniture, and finishes. Designing and detailing the various schemes will therefore be as straightforward as using Lego. To ease the process of accessing, sizing and placing the product libraries GDL Technology have developed a product called GDL Object Explorer, a free-standing application which can be placed on the CD with the product libraries. Furthermore, whilst the Object Explorer gives access to the GDL Objects it also enables the user to save the object in one of many file formats including DWG, DGN, DXF, 3DS and even the IAI's IFC. However, if you are an AutoCAD user there is another tool, which has been designed especially for you, it is called the Object Adapter and it works inside of AutoCAD 14 and 2000. The Object Adapter will dynamically convert all GDL Objects to AutoCAD Blocks during placement, which means that they can be controlled with standard AutoCAD commands. Furthermore, each object can be linked to an online document from the manufacturer web site, which is ideal for more extensive product information. Other tools, which have been developed to make the most of the objects, are the Web Plug-in and SalesCAD. The Plug-in enables objects to be dynamically modified and displayed on web pages and Sales CAD is an easy to learn and use design tool for sales teams to explore, develop and cost designs on a Notebook PC whilst sitting in the architects office. All sales quotations are directly extracted from the model and presented in HTML format as a mixture of product images, product descriptions and tables identifying quantities and costs. With full lifecycle information stored in each GDL Object it is no surprise that GDL Technology see their objects as the future for building design. Indeed they are not alone, the IAI have already said that they are going to explore the possibility of associating GDL Objects with their own data sharing format the IFC. So down to the dirty stuff, money and how much it costs? Well, at the risk of sounding like a market trader in Petticoat Lane, "To you guv? Nuffin". That's right as a user of this technology it will cost you nothing! Not a penny, it is gratis, free. The product manufacturer pays for the license to host their libraries on the web or on CD and even then their costs are small costing from as little as 50p for each CD filled with objects. GDL Technology has come up trumps with their GDL Objects. They have developed a new way to solve old problems. If CAD were a pencil then GDL Objects would be ballistic lead, which would never break or loose its point. A much better alternative to the strategy used by many of their competitors who seek to avoid breaking the pencil by persuading the artist not to press down so hard. If you are still reading and you have not already dropped the magazine and run off to find out if your favorite product supplier has already signed up then I suggest you check out the following web sites www.gdlcentral.com and www.gdltechnology.com. If you do not see them there, pick up the phone and ask them why.
series	journal paper
email
last changed	2003/04/23 15:14

_id	3e51
authors	Cerulli, C., Peng, C. and Lawson, B.
year	2001
title	Capturing Histories of Design Processes for Collaborative Building Design Development. Field Trial of the ADS Prototype
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 427-437
summary	The ADS Project - Advanced Design Support for the Construction Design Process - builds on the technological results of the previous COMMIT Project to exploit and demonstrate the benefits of a CAD based Design Decision Support System. COMMIT provides a system for storing knowledge about knowledge within the design process. It records design decisions, the actors who take them and the roles they play when doing so. ADS links COMMIT to an existing object-oriented CAD system, MicroStation/J from Bentley Systems. The project focuses on tackling the problem of managing design information without intruding too much on the design process itself. It provides the possibility to effectively link design decisions back to requirements, to gather rationale information for later stages of the building lifecycle, and to gather knowledge of rationale for later projects. The system enables members of the project team, including clients and constructors, to browse and search the recorded project history of decision making both during and after design development. ADS aims to facilitate change towards a more collaborative process in construction design, to improve the effectiveness of decision-making throughout the construction project and to provide clients with the facility to relate design outcomes to design briefs across the whole building life cycle. In this paper we will describe the field trials of the ADS prototype carried out over a three-month period at the Building Design Partnership (BDP) Manchester office. The objective of these trials is to assess the extent, to which the approach underlying ADS enhances the design process, and to gather and document the views and experiences of practitioners. The ADS prototype was previously tested with historical data of real project (Peng, Cerulli et al. 2000). To gather more valuable knowledge about how a Decision Support System like ADS can be used in practice, the testing and evaluation will be extended to a real project, while it is still ongoing. The live case study will look at some phases of the design of a mixed residential and retail development in Leeds, UK, recording project information while it is created. The users’ feedback on the system usability will inform the continuous redevelopment process that will run in parallel to the live case study. The ADS and COMMIT Projects were both funded by EPSRC.
keywords	Design Rationale, Design Support Systems, Usability Evaluation
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	958e
authors	Coppola, Carlo and Ceso, Alessandro
year	2000
title	Computer Aided Design and Artificial Intelligence in Urban and Architectural Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 301-307
doi	https://doi.org/10.52842/conf.ecaade.2000.301
summary	In general, computer-aided design is still limited to a rather elementary use of the medium, as it is mainly used for the representation/simulation of a design idea w an electronic drawing-table. hich is not computer-generated. The procedures used to date have been basically been those of an electronic drawing-table. At the first stage of development the objective was to find a different and better means of communication, to give form to an idea so as to show its quality. The procedures used were 2D design and 3D simulation models, usually used when the design was already defined. The second stage is when solid 3D modelling is used to define the formal design at the conception stage, using virtual models instead of study models in wood, plastic, etc. At the same time in other connected fields the objective is to evaluate the feasibility of the formal idea by means of structural and technological analysis. The third stage, in my opinion, should aim to develop procedures capable of contributing to both the generation of the formal idea and the simultaneous study of technical feasibility by means of a decision-making support system aided by an Artificial Intelligence procedure which will lead to what I would describe as the definition of the design in its totality. The approach to architectural and urban design has been strongly influenced by the first two stages, though these have developed independently and with very specific objectives. It is my belief that architectural design is now increasingly the result of a structured and complex process, not a simple act of pure artistic invention. Consequently, I feel that the way forward is a procedure able to virtually represent all the features of the object designed, not only in its definitive configuration but also and more importantly in the interactions which determine the design process as it develops. Thus A.I. becomes the means of synthesis for models which are hierarchically subordinated which together determine the design object in its developmental process, supporting decision-making by applying processing criteria which generative modelling has already identified. This trend is currently being experimented, giving rise to interesting results from process design in the field of industrial production.
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:56

_id	ddssar0023
id	ddssar0023
authors	Jens Pohl, Art Chapman, and Kym Jason Pohl
year	2000
title	Computer-aided design systems for the 21st century: some design guidelines
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	This paper proposes nine design principles for a new generation of computer-aided design (CAD) systems that actively support the decision making and problem solving activities of environmental design. Foremost among these are: a meaningful internal object-based representation of the artifact being designed within its environmental context; a collaborative problem solving paradigm in which the human designer and the computer form a complementary partnership; and, the notion of decision-support tools rather than predefined solutions. Two prototype computer-aided design systems implemented by the CAD Research Center that embody most of these concepts are described. ICADS (Intelligent Computer-Aided Design System) incorporates multiple expert agents in domains such as natural and artificial lighting, noise control, structural system selection, climatic determinants, and energy conservation. Given a particular building design context, the agents in ICADS draw upon their own expertise and several knowledgebases as they monitor the actions of the human designer and collaborate opportunistically. KOALA (Knowledge-Based Object-Agent Collaboration) builds on the multi-agent concepts embodied in ICADS by the addition of two kinds of agents. Mentor agents represent the interests of selected objects within the ontology of the design environment. In the implemented KOALA system building spaces are represented by agents capable of collaborating with each other, with domain agents for the provision of expert services, and with the human designer. Facilitator agents listen in on the communications among mentor agents to detect conflicts and moderate arguments. While both of these prototype systems are limited in scope by focussing on the earliest design stages and restricted in their understanding of the inherent complexity of a design state, they nevertheless promise a paradigm shift in computer-aided design.
series	DDSS
last changed	2003/08/07 16:36

_id	ga0004
id	ga0004
authors	Lund, Andreas
year	2000
title	Evolving the Shape of Things to Come - A Comparison of Interactive Evolution and Direct Manipulation for Creative Tasks
source	International Conference on Generative Art
summary	This paper is concerned with differences between direct manipulation and interactive evolutionary design as two fundamentally different interaction styles for creative tasks. Its main contribution to the field of generative design is the treatment of interactive evolutionary design as a general interaction style that can be used to support users in creative tasks. Direct manipulation interfaces, a term coined by Ben Shneiderman in the mid-seventies, are the kind of interface that is characteristic of most modern personal computer application user interfaces. Typically, direct manipulation interfaces incorporate a model of a context (such as a desktop environment) supposedly familiar to users. Rather than giving textual commands (i.e. "remove file.txt", "copy file1.txt file2.txt") to an imagined intermediary between the user and the computer, the user acts directly on the objects of interest to complete a task. Undoubtedly, direct manipulation has played an important role in making computers accessible to non-computer experts. Less certain are the reasons why direct manipulation interfaces are so successful. It has been suggested that this kind of interaction style caters for a sense of directness, control and engagement in the interaction with the computer. Also, the possibilities of incremental action with continuous feedback are believed to be an important factor of the attractiveness of direct manipulation. However, direct manipulation is also associated with a number of problems that make it a less than ideal interaction style in some situations. Recently, new interaction paradigms have emerged that address the shortcomings of direct manipulation in various ways. One example is so-called software agents that, quite the contrary to direct manipulation, act on behalf of the user and alleviate the user from some of the attention and cognitive load traditionally involved in the interaction with large quantities of information. However, this relief comes at the cost of lost user control and requires the user to put trust into a pseudo-autonomous piece of software. Another emerging style of human-computer interaction of special interest for creative tasks is that of interactive evolutionary design (sometimes referred to as aesthetic selection). Interactive evolutionary design is inspired by notions from biological evolution and may be described as a way of exploring a large – potentially infinite – space of possible design configurations based on the judgement of the user. Rather than, as is the case with direct manipulation, directly influencing the features of an object, the user influences the design by means of expressing her judgement of design examples. Variations of interactive evolutionary design have been employed to support design and creation of a variety of objects. Examples of such objects include artistic images, web advertising banners and facial expressions. In order to make an empirical investigation possible, two functional prototypes have been designed and implemented. Both prototypes are targeted at typeface design. The first prototype allows a user to directly manipulate a set of predefined attributes that govern the design of a typeface. The second prototype allows a user to iteratively influence the design of a typeface by means of expressing her judgement of typeface examples. Initially, these examples are randomly generated but will, during the course of interaction, converge upon design configurations that reflect the user’s expressed subjective judgement. In the evaluation of the prototypes, I am specifically interested in users’ sense of control, convergence and surprise. Is it possible to maintain a sense of control and convergence without sacrificing the possibilities of the unexpected in a design process? The empirical findings seem to suggest that direct manipulation caters for a high degree of control and convergence, but with a small amount of surprise and sense of novelty. The interactive evolutionary design prototype supported a lower degree of experienced control, but seems to provide both a sense of surprise and convergence. One plausible interpretation of this is that, on the one hand, direct manipulation is a good interaction style for realizing the user’s intentions. On the other hand, interactive evolutionary design has a potential to actually change the user’s intentions and pre-conceptions of that which is being designed and, in doing so, adds an important factor to the creative process. Based on the empirical findings, the paper discusses situations when interactive evolutionary design may be a serious contender with direct manipulation as the principal interaction style and also how a combination of both styles can be applied.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ddssar0022
id	ddssar0022
authors	Peng, C., Cerulli, C., Lawson, B., Cooper, G., Rezqui, Y. and Jackson, M.
year	2000
title	Recording and managing design decision-making processes through an object-oriented framework
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	In this paper we describe our current research into an object-oriented approach to the recording and managing of design decision-making in the processes of building design. The Advanced Design Support for the Construction Design Process (ADS) project, funded under the Innovative Manufacturing Initiative by the UK Engineering and Physical Sciences Research Council (EPSRC), aims to exploit and demonstrate the benefits of a CAD-based Design Decision Support System. The research focuses on how to provide designers with tools for recording and managing the group dynamics of design decision making in a project's life time without intruding too much on the design process itself. In collaboration with Building Design Partnership, a large multidisciplinary construction design practice, we look at design projects that require decision-making on an extraordinarily wide range of complex issues, and many different professional consultants were involved in making and approving these decisions. We are interested in developing an advanced CAD tool that will facilitate capturing designers' rationales underlying their design decision making throughout the project. The system will also enable us to explore how a recorded project history of decision-making can be searched and browsed by members of the project team during and after design development.
series	DDSS
last changed	2003/08/07 16:36

_id	01c0
authors	Af Klercker, Jonas
year	2000
title	Modelling for Virtual Reality in Architecture
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 209-213
doi	https://doi.org/10.52842/conf.ecaade.2000.209
summary	CAAD systems are using object modelling methods for building databases to make information available. Object data must then be made useful for many different purposes in the design process. Even if the capacity of the computer will allow an almost unlimited amount of information to be transformed, the eye does not make the transformations in the same “simple” mathematical way. Trained architects have to involve in an inventive process of finding ways to “harmonize” this new medium with the human eye and the architect’s professional experience. This paper will be an interimistic report from a surveying course. During the spring semester 2000 the CAAD division of TU-Lund is giving a course “Modelling for VR in Architecture”. The students are practising architects with experience from using object modelling CAAD. The aims are to survey different ways to use available hard- and software to create VR-models of pieces of architecture and evaluate them in desktop and CAVE environments. The architect is to do as much preparation work as possible with his CAAD program and only the final adjustments with the special VR tool.
keywords	CAAD, VR, Modelling, Spatial Experience
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	a136
authors	Blaise, J.Y., Dudek, I. and Drap, P.
year	1998
title	Java collaborative interface for architectural simulations A case study on wooden ceilings of Krakow
source	International Conference On Conservation - Krakow 2000, 23-24 November 1998, Krakow, Poland
summary	Concern for the architectural and urban preservation problems has been considerably increasing in the past decades, and with it the necessity to investigate the consequences and opportunities opened for the conservation discipline by the development of computer-based systems. Architectural interventions on historical edifices or in preserved urban fabric face conservationists and architects with specific problems related to the handling and exchange of a variety of historical documents and representations. The recent development of information technologies offers opportunities to favour a better access to such data, as well as means to represent architectural hypothesis or design. Developing applications for the Internet also introduces a greater capacity to exchange experiences or ideas and to invest on low-cost collaborative working platforms. In the field of the architectural heritage, our research addresses two problems: historical data and documentation of the edifice, methods of representation (knowledge modelling and visualisation) of the edifice. This research is connected with the ARKIW POLONIUM co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France) and the Institute HAiKZ of Kraków's Faculty of Architecture. The ARKIW programme deals with questions related to the use of information technologies in the recording, protection and studying of the architectural heritage. Case studies are chosen in order to experience and validate a technical platform dedicated to the formalisation and exchange of knowledge related to the architectural heritage (architectural data management, representation and simulation tools, survey methods, ...). A special focus is put on the evolution of the urban fabric and on the simulation of reconstructional hypothesis. Our contribution will introduce current ARKIW internet applications and experiences: The ARPENTEUR architectural survey experiment on Wie¿a Ratuszowa (a photogrammetrical survey based on an architectural model). A Gothic and Renaissance reconstruction of the Ratusz Krakowski using a commercial modelisation and animation software (MAYA). The SOL on line documentation interface for Kraków's Rynek G_ówny. Internet analytical approach in the presentation of morphological informations about Kraków's Kramy Bogate Rynku Krakowskiego. Object-Orientation approach in the modelling of the architectural corpus. The VALIDEUR and HUBLOT Virtual Reality modellers for the simulation and representation of reconstructional hypothesis and corpus analysis.
series	other
last changed	2003/04/23 15:14

_id	eabb
authors	Boeykens, St. Geebelen, B. and Neuckermans, H.
year	2002
title	Design phase transitions in object-oriented modeling of architecture
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 310-313
doi	https://doi.org/10.52842/conf.ecaade.2002.310
summary	The project IDEA+ aims to develop an “Integrated Design Environment for Architecture”. Its goal is providing a tool for the designer-architect that can be of assistance in the early-design phases. It should provide the possibility to perform tests (like heat or cost calculations) and simple simulations in the different (early) design phases, without the need for a fully detailed design or remodeling in a different application. The test for daylighting is already in development (Geebelen, to be published). The conceptual foundation for this design environment has been laid out in a scheme in which different design phases and scales are defined, together with appropriate tests at the different levels (Neuckermans, 1992). It is a translation of the “designerly” way of thinking of the architect (Cross, 1982). This conceptual model has been translated into a “Core Object Model” (Hendricx, 2000), which defines a structured object model to describe the necessary building model. These developments form the theoretical basis for the implementation of IDEA+ (both the data structure & prototype software), which is currently in progress. The research project addresses some issues, which are at the forefront of the architect’s interest while designing with CAAD. These are treated from the point of view of a practicing architect.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	3264
authors	Chen, Kuang-Hsiung and Tsai, Wen-Hsiang
year	2000
title	Vision-based obstacle detection and avoidance for autonomous land vehicle navigation in outdoor roads
source	Automation in Construction 10 (1) (2000) pp. 1-25
summary	An effective approach to obstacle detection and avoidance for autonomous land vehicle (ALV) navigation in outdoor road environments using computer vision and image sequence techniques is proposed. To judge whether an object newly appearing in the image of the current cycle taken by the ALV is an obstacle, the object shape boundary is first extracted from the image. After the translation from the ALV location in the current cycle to that in the next cycle is estimated, the position of the object shape in the image of the next cycle is predicted, using coordinate transformation techniques based on the assumption that the height of the object is zero. The predicted object shape is then matched with the extracted shape of the object in the image of the next cycle to decide whether the object is an obstacle. We use a reasonable distance measure to compute the correlation measure between two shapes for shape matching. Finally, a safe navigation point is determined, and a turn angle is computed to guide the ALV toward the navigation point for obstacle avoidance. Successful navigation tests show that the proposed approach is effective for obstacle detection and avoidance in outdoor road environments.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ga0015
id	ga0015
authors	Daru, R., Vreedenburgh, E. and Scha, R.
year	2000
title	Architectural Innovation as an evolutionary process
source	International Conference on Generative Art
summary	Traditionally in art and architectural history, innovation is treated as a history of ideas of individuals (pioneers), movements and schools. The monograph is in that context one of the most used forms of scientific exercise. History of architecture is then mostly seen as a succession of dominant architectural paradigms imposed by great architectural creators fighting at the beginning against mainstream establishment until they themselves come to be recognised. However, there have been attempts to place architectural innovation and creativity in an evolutionary perspective. Charles Jencks for example, has described the evolution of architectural and art movements according to a diagram inspired by ecological models. Philip Steadman, in his book "The Evolution of Designs. Biological analogy in architecture and the applied arts" (1979), sketches the history of various biological analogies and their impact on architectural theory: the organic, classificatory, anatomical, ecological and Darwinian or evolutionary analogies. This last analogy "explains the design of useful objects and buildings, particularly in primitive society and in the craft tradition, in terms of a sequence of repeated copyings (corresponding to inheritance), with small changes made at each stage ('variations'), which are then subjected to a testing process when the object is put into use ('selection')." However, Steadman has confined his study to a literature survey as the basis of a history of ideas. Since this pioneering work, new developments like Dawkins' concept of memes allow further steps in the field of cultural evolution of architectural innovation. The application of the concept of memes to architectural design has been put forward in a preceding "Generative Art" conference (Daru, 1999), showing its application in a pilot study on the analysis of projects of and by architectural students. This first empirical study is now followed by a study of 'real life' architectural practice. The case taken has a double implication for the evolutionary analogy. It takes a specific architectural innovative concept as a 'meme' and develops the analysis of the trajectory of this meme in the individual context of the designer and at large. At the same time, the architect involved (Eric Vreedenburgh, Archipel Ontwerpers) is knowledgeable about the theory of memetic evolution and is applying a computer tool (called 'Artificial') together with Remko Scha, the authoring computer scientist of the program who collaborates frequently with artists and architects. This case study (the penthouse in Dutch town planning and the application of 'Artificial') shall be discussed in the paper as presented. The theoretical and methodological problems of various models of diffusion of memes shall be discussed and a preliminary model shall be presented as a framework to account for not only Darwinian but also Lamarckian processes, and for individual as well as collective transmission, consumption and creative transformation of memes.
keywords	evolutionary design, architectural innovation, memetic diffusion, CAAD, penthouses, Dutch design, creativity, Darwinian and Lamarckian processes
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	9b63
authors	De Mesa, A., Quilez, J. and Regot, J.
year	1999
title	Sunlight Energy Graphic and Analytic Control in 3D Modelling
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 733-738
doi	https://doi.org/10.52842/conf.ecaade.1999.733
summary	Linking solar positions with architecture is a traditional idea, but the use of graphical tools to control sunlight in urban surroundings or buildings is relatively recent. A three-dimensional working environment like the computer offers a new dimension to verify the relationships between the sun and the architecture. This paper shows a new way to calculate the incidence of solar energy in architectural environments using computer 3D modelling. The addition of virtual space visualisation to the analytic computation brings a new tool that simplifies the technical study of sunlight. We have developed several programs based upon the three-dimensional construction of the solar vault and the obstructing objects for a defined position. The first one draws the solar vault for a defined range of dates according to latitude, that is the basis of the energetic calculation. The second program computes the obstruction, i.e. the solar regions that are obstructed by any object. Finally, the third one, allow us to define an orientation to compute the energy that arrives to the analysed positioning. The last program returns the result of calculation in several ways: it shows the amount of energy through colours and makes a list of solar hours according to its energy.
keywords	Sunlight, Energy, 3D modelling
series	eCAADe
last changed	2022/06/07 07:56

_id	2aca
authors	Faucher, Didier and Nivet, Marie-Laure
year	2000
title	Playing with design intents: integrating physical and urban constraints in CAD
source	Automation in Construction 9 (1) (2000) pp. 93-105
summary	Our work deals with the exploration of a universe of forms that satisfy some design intents. That is, we substitute a "generate and test" approach for a declarative approach in which an object is created from its properties. In this paper we present an original method that takes into account design intents relative to sunlight, visibility and urban regulation. First of all we study how current CAD tools have considered these properties until now. Our conclusion is that the classical design/simulation/analysis process does not suit design practices, especially in the early stages. We think that an improved CAD system should offer the architect the option of manipulating abstract information such as design intents. We define an intent as a conceptual expression of constraints having an influence on the project. For instance, a visual intent will be stated with no reference to vision geometry: "from this place, I want to see the front of the new building". We show how to represent each of these constraints with a 3D volume associated to some characteristics. If some solutions exist, we are sure that they are included in these volumes. For physical phenomena we compute the volume geometry using the principles of inverse simulation. In the case of urban regulation we apply deduction rules. Design intents are solved by means of geometrical entities that represent openings or obstructions in the project. Computing constraint volumes is a way of guiding the architect in his exploration of solutions. Constraint volumes are new spaces that can restore the link between form and phenomenon in a CAD tool. Our approach offers the designer the possibility of manipulating design intents.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	eada
authors	Fischer, T., Burry, M. and Woodbury, R.
year	2000
title	Object-Oriented Modelling Using XML in Computer-Aided Architectural and Educational CAD. The Problem of Interoperability Exemplified in Two Case Studies
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 145-155
doi	https://doi.org/10.52842/conf.caadria.2000.145
summary	This paper highlights our application of XML as a messaging and storage format for parametric 3D modelling and pattern-oriented online teaching. As a recent format for data description and transport technology XML is designed to allow communication between arbitrary data platforms - and to communicate purpose-insensitively. We have used it to communicate design patterns as well as design parameters and as a consequence experienced a remarkable technical similarity between both approaches with their common manifestation in object orientation. There is a necessity to perform dynamic synchronizations of semantics between 'knowledge domains' involved in design processes in order to provide the necessary conceptual openness. At this time, this requirement appears to be alien to available XML schema specifications and tools.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	8805
authors	Flemming, U., Erhan, H.I. and Ozkaya, I.
year	2001
title	Object-Oriented Application Development in CAD
source	Technical Report 48-01-01. Pittsburgh, PA: Carnegie Mellon University, Institute of Complex Engineered Systems
summary	This report describes a graduate interdisciplinary course offered to students in the graduate program of the School of Architecture at Carnegie Mellon and related departments in fall 2000. The motivation was the realization that when commercial CAD (Computer-Aided Design) systems recently switched from procedural application programming languages to object-oriented ones, third-party application must undergo a significant cognitive retooling"; i. e. they must know more than the syntax and semantics of the new programming language to be used and must be able to employ appropriate software development strategies that are appropriate for the new paradigm. especially with respect to the importance of modeling, a distinguishing characteristic of object-oriented programming. The goal of the course was (a) to introduce and test strategies of object-oriented application development in general and in the context of MicroStation, a state-of-the-art commercial CAD package; (b) to develop-as a course team project-an interesting application that gives students practice with these strategies and team work; and (c) to document our approach and findings so that others can learn from them. The strategies introduced were the use-case approach of Jacobson et al. and the complementary object-modeling tools of Rumbaugh that were recently integrated into the Unified Modeling Language UML. The software platform supporting the course comprised MicroStation, JMDL (a superset of Java) and ProjectBank on the CAD side and RationalRose on the modeling side. The application developed by students in the course supports the generation of drawings for remodeling projects from a set of dgn files describing the existing state of the building to be remodeled. The course was supported by a grant and in-kind contributions from Bentley with matching funds from the Pennsylvania Infrastructure Technology Alliance (PITA)."
series	report
email
last changed	2003/04/23 15:50

_id	d931
authors	Gabryszewski, Artur B.
year	1999
title	Idea of an Intelligent Building - Development Prospects
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 739-743
doi	https://doi.org/10.52842/conf.ecaade.1999.739
summary	An ever-increasing number of offices as also residential buildings are being realised by designers and investors in accordance with the concept of an intelligent building. Houses of the new generation are being constructed. This is possible thanks to dynamic progress in the development of computer and microprocessor engineering techniques. Putting into reality the idea of the 'intelligent building' will become one of the most interesting assignments of Polish building industry in the rapidly approaching XXI century. The term 'intelligent building' first appeared in the eighties. The idea behind this conception is aspiring to create a friendly, work supporting, effective environment. The revolution in telecommunications and information technology along with change in the standards of office work, have caused computer networks and modem systems of automation and protection, to invade buildings. From the technical point of view, an intelligent building is an object in which all the subsystems co-operate with each other, forming a friendly environment for man. For users of an intelligent building, the most important issue is realisation of the following aims: object management which includes both control of human resources and automation systems in the building and also efficient management of the building space in such a way that the costs of its utilisation are minimised. The possibility of optional installation of modern systems and equipment should be facilitated by the architecture itself. Therefore, the specifics of all the building elements should be taken into account right at the designing stage. The following features characterise an intelligent building: integration of telecommunication systems in the building, central management and supervision system and utilisation of structural cabling as the carrier of signals controlling most of the systems in the building. Presently, there is no building in Poland that could be characterised by the three features mentioned.
keywords	High-tech Architecture, Ecology, CAAD
series	eCAADe
email
last changed	2022/06/07 07:50

_id	6899
authors	Groisman, Martin
year	2000
title	Tal Vez Mañana - Un Estudio sobre la Ficción Narrativa en los Hypermedios (Perhaps Tomorrow - A Study on the Fictional Narrative in Hypermedia)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 304-306
summary	Medio y Medio is an interdisciplinary argentine-uruguayan group of research and production that originated two years ago in the academic context of the ORT University of Uruguay, with the object of exploring the possibilities of narrative fiction in multimedia language. With the participation of teachers and professionals in the field of graphic design, fine arts, the cinema, TV, music, system programming and literature, a product has been devised, called “Maybe Tomorrow...” It is an interactive novel constructed on CD-ROM support. It is based on an original narration, developed around four stories that take place in the city of Montevideo. Each story has a different image treatment which responds to the use of different audiovisual languages. The reading of this interactive novel offers different trajectories, making the navigation in diverse ways possible. In this way, the reader constructs the meaning of the narration as he/she advances in the reading.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ddssar0012
id	ddssar0012
authors	Hendricx, Ann and Neuckermans, Herman
year	2000
title	Setting objects to work: adding functionality to an architectural object model
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	Several research initiatives in the field of product modelling have produced static descriptions of the architectural and geometrical objects capable of describing architectural design projects. Less attention is paid to the development phase in which these static models are transformed into workable architectural design environments. In the context of the IDEA+ research project (Integrated Design Environment for Architectural Design), we use the object-oriented analysis method MERODE to develop and describe both an enterprise (or product) model and a functionality model. On the one hand, the enterprise model defines the architectural and geometrical objects, their methods and their relation with other objects. On the other hand, the functionality model organizes the functionality objects – ranging from single-event objects to complex-workflow objects – in a layered and easily expandable system. The functionality model is created on top of the enterprise model and closes the gap between the static enterprise model and the dynamic design environment as a whole. After a short introduction of the envisaged design environment and its underlying enterprise model, the paper will concentrate on the presentation of the higher-level functionality model. Elaborated examples of functionality objects on the different levels will clarify its concepts and proof its feasibility.
series	DDSS
last changed	2003/08/07 16:36

_id	c839
authors	Hwang, Jie-Eun
year	2002
title	SpaceScope: Developing a Spatial Information Retrieval System - Focused on Apartment Unit Floor Plans -
source	Yonsei University, Dept. of Housing & Interior Design
summary	This research investigates the spatial information retrieval (IR) in architecture focused on constructing efficient metadata that is crucial for data retrieval. Generally speaking, metadata is ‘structured data about data’ to describe resources especially in a digital format. In this research, metadata is a sort of data object to be useful in searching spatial information. Metadata is also used to describe raw spatial data object as not only attribute data but also content structurally and semantic ally. There are two issues that motivate this research; 1) what is the spatial information – that materializes the intangible space as a data object, and 2) how we can search the information efficiently – the content-based information retrieval. Although knowledge of a building’s spatial content is most important in architecture, there has been no logical method to manage it. From the viewpoint of content-based retrieval, the researcher analyzes spatial information of a floor plan, with a focus on the apartment unit floor plan common in Korea. Then the metadata items are extracted in a structured manner. To manage the items efficiently, the researcher develops a data model for spatial information according to the concept of the “Structured Floor Plan”. The main object of content to retrieve is a spatial network that consists of nodes of spaces and their linkages. There are two ways to organize the metadata: the traditional index files and the RDF (Resource Description Framework). While the index files are still efficient with computability, the RDF applies greater options to retrieve, such as fuzzy predicates, semantic predicates, and so on. To exploit the metadata, this research shows several possibilities of query operations that present a set of sample queries about L-DK(Living room – Dining room – Kitchen). Implementation of the prototype system is divided into three parts: 1) a modeling module using Vitruvius; 2) an indexing module using MS SQL Server? 2000 in conjunction XML; and 3) a browsing module using the SpaceScope browser. The future works may consider XML-based databases and a knowledge based query language, such as RQL/XQL, working on such databases. The more specific domain knowledge is involved, the more practical systems would be. Even in architecture, there may be a diverse range of domain knowledge, such as design, building performance, facility management, energy management, post occupied evaluation, historical research, and so on. Also the issue of interface should be investigated in depth, so that it will be adequate to the needs of the architectural field.
keywords	Content-based Information Retrieval; Metadata; RDF; XML; Spatial Information; Apartment Floor Plan; Semantics
series	thesis:MSc
email
last changed	2003/04/25 07:27

_id	394a
authors	Jabi, Wassim
year	2000
title	WebOutliner: A Web-Based Tool for Collaborative Space Programming and Design
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 195-201
doi	https://doi.org/10.52842/conf.acadia.2000.195
summary	This paper discusses a web-based tool that allows members of a design team to collaboratively specify a hierarchical spatial program for an architectural project. Given its object orientation, the represented artifacts have built-in data and methods that allow them to respond to user actions and manage their own sub-artifacts. Given that these components are hierarchical allows users to filter information, analyze and compare design parameters and aggregate hierarchical amounts in realtime. Furthermore, the software goes beyond outlining functions to support synchronous collaborative design by linking each item in the spatial program to a detail page that allows file uploading, realtime group marking of images, and textual chat. Thus, the software offers a seamless transition from the largely asynchronous definition of an architectural program to synchronous collaboration. In addition, and in contrast to commercially available groupware, the software allows multiple collaboration sessions to run at the same time. These sessions are artifact-based in the sense that they get automatically initiated once participants visit the same architectural space in the program hierarchy. The software employs a three-tier object-oriented, web-based scheme for a richer representation of hierarchical artifacts coupled with a relational database for server-side storage. The prototype integrates this technology with Java-based tools for synchronous web-based collaboration.
series	ACADIA
email
last changed	2022/06/07 07:51

For more results click below: