Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 717

Reformat results as: short short into frame detailed detailed into frame

_id	e345
authors	Marx, John
year	2000
title	A proposal for alternative methods for teaching digital design
source	Automation in Construction 9 (1) (2000) pp. 19-35
summary	Computers have the potential to radically change the process of architectural design, and match more closely the formal aspirations of contemporary designers. What, then, should be the direction educators take in response to the opportunities created by the use of computers in the design process? There are, perhaps, two obvious methods of teaching Digital Design at a university level; a course adjunct to a design studio, or a course offered independently of a design studio.The computer is a facilitator of design ideas, but by itself, is not a creator of content. The primary responsibility of the design studio is the creation of content. It is the implementation of theory and critical analysis which should be the core concern of studio instruction. Given the limited time students are exposed to design studio it would seem appropriate, then, that the digital tools, which facilitate the design process, be taught separately, so as not to dilute the design studios importance. Likewise, this separation should allow the student to concentrate attention on Digital Design as a comprehensive process, beginning with initial massing studies and ending with high resolution presentation drawings. The burden of learning this new process is difficult as well as time consuming. Students are generally struggling to learn how to design, much less to design on the computer. In addition, the current lack of digital skills on the part of design faculty makes it difficult to create a level of consistency in teaching digital design. Compounding these problems is the cost to architectural departments of providing hardware and software resources sufficient to have a computer on every studio desk.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	sigradi2004_027
id	sigradi2004_027
authors	Alfredo Stipech
year	2004
title	Enseñanza de la representación manual y digital, para arquitectos y diseñadores [Teaching Hand and Digital Representation to Architects and Designers]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The supremacy of the digital means of representation and communication and the resulting shift of the manual means in the field of design and architecture, have engendered multiple opinions and literature. They focus and analyze the virtues and risks, the losses and substitutions, and the different expressive, productive and conceptual results of their leading role in the creative process. Furthermore, if we consider both as two extremes, apparently opposed, a broad panorama of combinations and additions are produced by the emerging group of hybrid practices. This motivated the development of a research project in the Universidad Nacional del Litoral de Santa Fe, Argentina, under the Program CAI+D 2000 dealing with Design and the Analog – Digital Means. From this project emerged a collection of conceptual speculations and experimentations in the extended field of representation, extended by the incorporation of new means and hybridations, searching for new parameters and methods for professional training and practice. Key words: analog, digital, graphics, means, representation.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	31d6
authors	Harfmann, Anton C. and Akins, Peter E.
year	2000
title	The Composite Building Sketch
doi	https://doi.org/10.52842/conf.acadia.2000.273
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 273-280
summary	This works in progress paper describes the development of an alternative method for teaching building technology using the composite sketch concept borrowed from police forensics. The composite sketch utilizes individual components and assemblies of construction in various combinations to explore the design implications of materials and connections on form and surface. To enhance the usefulness of the composite sketch, in-depth case studies of specific buildings are linked to the digital assemblies of the composite sketch so that students can see the basic concepts in actual buildings. The project currently models more than 500 combinations of components and includes approximately 200 catalogued images of buildings under construction.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	b352
authors	Kilkelly, Michael
year	2000
title	Off The Page: Object-Oriented Construction Drawings
doi	https://doi.org/10.52842/conf.acadia.2000.147
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 147-151
summary	This paper discusses methods in which inefficiencies in the construction documentation process can be addressed through the application of digital technology. These inefficiencies are directly related to the time consuming nature of the construction documentation process, given that the majority of time is spent reformatting and redrawing previous details and specifications. The concepts of objectoriented programming are used as an organizational framework for construction documentation. Database structures are also used as a key component to information reuse in the documentation process. A prototype system is developed as an alternative to current Computer-Aided Drafting software. This prototype, the Drawing Assembler, functions as a graphic search engine for construction details. It links a building component database with a construction detail database through the intersection of dissimilar objects.
series	ACADIA
last changed	2022/06/07 07:52

_id	sigradi2008_081
id	sigradi2008_081
authors	Kirschner, Ursula
year	2008
title	Study of digital morphing tools during the design process - Application of freeware software and of tools in commercial products as well as their integration in AutoCAD
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This research work examines methods of experimental designing with CAAD in a CAD laboratory with architecture students as the testing persons. Thereby the main focus is on the early phase of finding forms, in which different techniques with digital media are tried out in the didactic architectural design lessons. In these work have been traced the influences of the media employed on the design processes and combined the approaches of current CAAD research with aspects from classic design theory. For mathematical rules of proportion, atmospheric influence factors and analogy concepts in architecture, I have developed design methods which have been applied and verified in several series of seminars. (Kirschner, U.: 2000, Thesis, a CAAD supported architectural design teaching, Hamburg, school of arts). Previous experimental exercises showed that morphological sequences of modeling are effective sources for playful designing processes. In the current work these approaches are enhanced and supplemented by different morphological architectural concepts for creating shapes. For this purpose 2D based software like Morphit, Winmorph and other freeware were used. Whereas in the further development of this design technique we used 3D freeware morphing programs like zhu3D or Blender. The resulting morphological shapes were imported in CAD and refined. Ideally the morphing tool is integrated in the modeling environment of the standard software AutoCAD. A digital city model is the starting basis of the design process to guarantee the reference to the reality. The applied design didactic is predicated on the theories of Bernhard Hoesli. The act of designing viewed as „waiting for a good idea“ is, according to him, unteachable; students should, in contrast, learn to judge the „the force of an idea“. On the subject of morphology a form-generating method in the pre-design phase has been tested. Starting from urban-planning lines on an area map, two simple geometric initial images were produced which were merged by means of morphing software. Selected images from this film sequence were extruded with CAAD to produce solid models as sectional drawings. The high motivation of the students and the quality of the design results produced with these simple morphing techniques were the reason for the integration of the artistic and scientific software into the creative shape modeling process with the computer. The students learned in addition to the „bottom up “and „ top down” new design methods. In the presentation the properties and benefits of the morphing tools are presented in tables and are analyzed with regard to the architectural shape generating in an urban context. A catalogue of criteria with the following topics was developed: user friendliness, the ability of integrating the tools or as the case may be the import of data into a CAD environment, the artistic aspects in terms of the flexibility of shape generating as well as the evaluation of the aesthetic consideration of shapes.
keywords	Architectural design, freeware morphing software, AutoCAD
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	5bc1
authors	Sampaio Nardelli, Eduardo
year	2000
title	O Uso do Computador como Ferramenta de Ensino de Projeto de Arquitetura (The Use of Computers as a Tool for Architectural Design Teaching)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 355-357
summary	The focus of this research is to demonstrate the possibilities of the use of computers on teaching Architectural Project. As faculty member at Mackenzie University we relate our experience, where we utilized scale models for the development of proposals, where it was assumed that the media used for expression of the concepts proposed by students interferes on the final result. Facing this assumption, we imagine that a Bricolage Studio could strongly improve the design classes. Considering the operational difficulties of this idea, we suggest that computer could be an alternative if used in the conceptual stage. So, we would have a Digital Bricolage Studio, where students could experience different visualization and simulation resources which stimulate their creative processes. We tried this experience with students of Faculdade de Belas Artes de S.Paulo and concluded that computer resources are also a way to understand and interpretate the spirit of our time.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	ea49
authors	Yen-wen Cheng, Nancy and Kvan, Thomas
year	2000
title	Design Collaboration Strategies Estrategias para la Colaboración de Diseño a Larga Distancia
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 45-49
summary	This paper explains the logistical and technical issues involved in design collaboration and how to address them strategically in projects for design, teaching and research. Five years of arranging projects, studying peer results and involving novices in exchanges point out the benefits and pitfalls of Internet partnering. Rather than a single universal technical solution, multiple solutions exist: Technical means must be tailored to specifics concerning the task and participants. The following factors need to be considered in finding the best fit between technology and group design: 1) Collaborators' profiles, 2) Mutual value of produced information, 3) Collaboration structure, and 4) Logistical opportunities. The success of a virtual studio depends upon clear task definition, aligned participant expectations and suitable engagement methods. // We question the efforts required in the installation of expensive technologies for communication and visualization. Often technical systems support ancillary and non-beneficial activity. Matching needs and resources can be more critical than high-tech equipment. People motivated to interact will work around technical difficulties.
series	SIGRADI
email
last changed	2016/03/10 10:03

_id	623c
authors	De Oliveira Zandomeneghi, A.L.A., Kejelin Stradiotto, C.R., Moritz Lima, E.K., Silvano Batista, M., Pinto Lincho, P.R., Costa, R., Da Cunha Silveira, S. and Ribas Ulbrich, S.
year	2000
title	Construindo o Conhecimento da Hipermídia (Constructing the Hypermedia Knowledge)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 286-288
summary	The present article reports the experience of a Mastership/Doctorate class in the Production Engineering Postgraduation Program of Santa Catarina Federal University, with the finality of building a prototype of an educational software. The proposal was to facilitate hypermedia teaching, using hypermedia it self and starting from constructivism basements for the making of the project, named Building Hypermedia. The developed program enveloped pedagogically and operationally three phases: a navigation inside a given hypermedia, a feedback and a conscientization of the traveled way, and the possibility of making a singular hypermedia. The study is here presented on its essence, with the report of the work stages, the discrimination of the basic contents and the insertion of the main frames of the software. The objective is to show what results were reached and demonstrate the use and utility of hypermedia, as a computational mechanism with wide and diversified resources, mainly in teaching area.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ddssar0014
id	ddssar0014
authors	Janssen, P., Frazer, J. and Ming-xi, T.
year	2000
title	Evolutionary design systems: a conceptual framework for the creation of generative processes
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	This paper presents an conceptual framework for the construction of generative mapping processes as a basis for creating active design tools in the domain of architecture. Such generative processes are seen as key components within evolutionary systems that manipulate populations of alternative solutions in order to discover previously unexplored possibilities. Solutions are represented in two forms: as highly encoded genotypes referred to as design seeds and as decoded phenotypes referred to as design proposals. The generative process maps the design seed to the design proposal. The discussion of generative processes is in two parts. In the first part it is argued that any generative process that aims to create a wide range of solutions that differ from each other in fundamental ways must focus on a limited subcategory of possible designs. It is proposed that the endeavour to create active design tools demands that the focus be on the designer's highly personalised style, called a design-schema. The second part discusses how to uncover the essence of an architectural design-schema. In particular, it is argued that implicit and familiar aspects of buildings must be scrutinised in order to reveal the knowledge that is essential to capturing and codifying a design-schema. A range of rationalisations and conceptualisations of built form are presented with examples to illustrate possible routes of analysis. Finally, in conclusion, the possibility of discovering universal generators common to many divers generative processes are discussed.
series	DDSS
last changed	2003/08/07 16:36

_id	7449
authors	Medero Rocha, Isabel A. and Danckwardt, Voltaire
year	2000
title	Projeto Missões, Computação Gráfica - Multimídia da Reconstituição Computadorizada da Redução de São Miguel Arcanjo no Rio Grande do Sul - Brasil ("Missões" Project, Computer Graphics and Multimedia of the "Redução de São Miguel Arcanjo" Digital Reconstruction (Rio Grande do Sul, Brazil))
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 191-193
summary	The Project Missions - Graphical Computation, recoups in a graphical and digital the pictures of the Church and the Reduction of São Miguel Arcanjo/RS/Brasil, allowing to the public a virtual stroll through the set at the time of its foundation in 1687. Initiate in 1990, the design refers the appropriation and implementation of the new computational technologies. The 3D model allows the dynamic visualization of the set, through aerial sights and walkthrough animations into the main streets and the inward of the central ship of the church. For the generation of the model, it was followed the principles of the architectural composition to decompose the parts, to be shaped, defining the architectural and composition elements. This COMPACT DISC, is one of the some midias of the Design Missions - Graphical Computation. In this proposal, the music was developed especially for the COMPACT DISC, looks for to reflect the poetical aspect of the interaction between light, shadow, of the inwards and exteriors, attenuating the technology of a virtual environment. In the integration between the art and the technology its recovered virtually, the poetical way, the memory of one of the icons of the identity of the Rio Grande do Sul, with the objective to keep alive, for the new generations, a patrimony that practically in ruins would have the souvenir of its lost real picture in the time.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	9e47
authors	Tovey, Michael and Owen, John
year	2000
title	Sketching and direct CAD modelling in automotive design
source	Design Studies 21 (6) (2000) pp. 569-588
summary	This paper examines two methods of computer-based car styling: texture mapping and direct computer modelling. An overview of current activity in the field precedes a comparison and evaluation of the methods within a typical framework for automobile concept design. Three case studies illustrate the direct modelling method, showing differences of computer use in each case. Further developments of texture mapping are reported, with a proposal for iterative combining of texture mapping and direct modelling.
series	journal paper
last changed	2003/05/15 21:45

_id	9b44
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2000
title	The Importance of Virtual Environments in the Design of Electronic Games and Their Relevance to Architecture
doi	https://doi.org/10.52842/conf.ecaade.2000.181
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 181-185
summary	Ever increasing complexity in architectural design and the need to deliver a cost effective solution requires the employment and adoption of innovative design methods. Although technological changes have entered the field of architecture at a slower pace, the recent adoption of 3D modelling, Virtual Environment and multimedia represent significant changes in architectural design, visualisation and presentation. These now include tools for conceptualisation, design synthesis, design presentation, desktop publishing, animation, Internet and hypermedia authoring. Uddin argues that the major activities involved in the creative and dynamic process of architectural design deal with conceptualisation, visualisation and expression of alternative ideas through two-dimensional and three-dimensional model. This paper highlights the need for the employment of emerging computer based real-time interactive technologies that are expected to enhance the design process through better decision-making, higher quality communication and collaboration, error reduction, spatial awareness, interactive design and real-time visualisation.
keywords	CAD, Game Design, Virtual Reality, Virtual Environments, Virtual Prototyping, Internet Technologies, Architecture
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	0c0d
authors	Asanowicz, Aleksander
year	2000
title	Computer as an Metaphorisation Machine
doi	https://doi.org/10.52842/conf.ecaade.2000.283
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 283-286
summary	Digital media is transforming the practice and teaching of design. Information technologies offer not only better production and rendering tools but also the ability to model, manipulate, and understand design in new ways. A new era in CAAD has started. One of the aspects of this situation is the increase in the number of computers in design offices and architectural schools (many of our students have their own computers, which a re often better than the computers we have at our school). We can submit a proposition that the critical point in the creative use of computers is over, and we should think how computers and new media may extend the designer’s perception and imagination.
keywords	Creation of a Form, Imagination, Metaphors, Computer Support of Form Searching
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	60e7
authors	Bailey, Rohan
year	2000
title	The Intelligent Sketch: Developing a Conceptual Model for a Digital Design Assistant
doi	https://doi.org/10.52842/conf.acadia.2000.137
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 137-145
summary	The computer is a relatively new tool in the practice of Architecture. Since its introduction, there has been a desire amongst designers to use this new tool quite early in the design process. However, contrary to this desire, most Architects today use pen and paper in the very early stages of design to sketch. Architects solve problems by thinking visually. One of the most important tools that the Architect has at his disposal in the design process is the hand sketch. This iterative way of testing ideas and informing the design process with images fundamentally directs and aids the architect’s decision making. It has been said (Schön and Wiggins 1992) that sketching is about the reflective conversation designers have with images and ideas conveyed by the act of drawing. It is highly dependent on feedback. This “conversation” is an area worthy of investigation. Understanding this “conversation” is significant to understanding how we might apply the computer to enhance the designer’s ability to capture, manipulate and reflect on ideas during conceptual design. This paper discusses sketching and its relation to design thinking. It explores the conversations that designers engage in with the media they use. This is done through the explanation of a protocol analysis method. Protocol analysis used in the field of psychology, has been used extensively by Eastman et al (starting in the early 70s) as a method to elicit information about design thinking. In the pilot experiment described in this paper, two persons are used. One plays the role of the “hand” while the other is the “mind”- the two elements that are involved in the design “conversation”. This variation on classical protocol analysis sets out to discover how “intelligent” the hand should be to enhance design by reflection. The paper describes the procedures entailed in the pilot experiment and the resulting data. The paper then concludes by discussing future intentions for research and the far reaching possibilities for use of the computer in architectural studio teaching (as teaching aids) as well as a digital design assistant in conceptual design.
keywords	CAAD, Sketching, Protocol Analysis, Design Thinking, Design Education
series	ACADIA
last changed	2022/06/07 07:54

_id	1f5c
authors	Beesley, Philip and Seebohm, Thomas
year	2000
title	Digital Tectonic Design
doi	https://doi.org/10.52842/conf.ecaade.2000.287
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 287-290
summary	Digital tectonic design is a fresh approach to architectural design methodology. Tectonics means a focus on assemblies of construction elements. Digital tectonics is an evolving methodology that integrates use of design software with traditional construction methods. We see digital tectonic design as a systematic use of geometric and spatial ordinances, used in combination with details and components directly related to contemporary construction. The current approach will, we hope, lead to an architectural curriculum based on generative form making where the computer can be used to produce systems of forms algorithmically. Digital design has tended to remain abstract, emphasizing visual and spatial arrangements often at the expense of materials and construction. Our pursuit is translation of these methods into more fully realized physical qualities. This method offers a rigorous approach based on close study of geometry and building construction elements. Giving a context for this approach, historical examples employing systematic tectonic design are explored in this paper. The underlying geometric ordinance systems and the highly tuned relationships between the details in these examples offer design vocabularies for use within the studio curriculum. The paper concludes with a detailed example from a recent studio project demonstrating particular qualities developed within the method. The method involves a wide range of scales, relating large-scale gestural and schematic studies to detailed assembly systems. Designing in this way means developing geometric strategies and, in parallel, producing detailed symbols or objects to be inserted. These details are assembled into a variety of arrays and groups. The approach is analogous to computer-aided designÕs tradition of shape grammars in which systems of spatial relationships are used to control the insertion of shapes within a space. Using this approach, a three-dimensional representation of a building is iteratively refined until the final result is an integrated, systematically organized complex of symbols representing physical building components. The resulting complex offers substantial material qualities. Strategies of symbol insertions and hierarchical grouping of elements are familiar in digital design practice. However these strategies are usually used for automated production of preconceived designs. In contrast to thsse normal approaches this presentation focuses on emergent qualities produced directly by means of the complex arrays of symbol insertions. The rhyth
keywords	3D CAD Systems, Design Practice, 3D Design Strategies
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	cd17
authors	Bermudez, J., Agutter, J., Westenskow, D., Foresti, S., Zhang, Y., Gondeck-Becker, D., Syroid, N., Lilly, B., Strayer, .D. and Drews, F.
year	2000
title	Data Representation Architecture: Visualization Design Methods, Theory and Technology Applied to Anesthesiology
doi	https://doi.org/10.52842/conf.acadia.2000.091
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 91-102
summary	The explosive growth of scientific visualization in the past 10 years demonstrate a consistent and tacit agreement among scientists that visualization offers a better representation system for displaying complex data than traditional charting methods. However, most visualization works have not been unable to exploit the full potential of visualization techniques. The reason may be that these attempts have been largely executed by scientists. While they have the technical skills for conducting research, they do not have the design background that would allow them to display data in easy to understand formats. This paper presents the architectural methodology, theory, technology and products that are being employed in an ongoing multidisciplinary research in anesthesiology. The project’s main goal is to develop a new data representation technology to visualize physiologic information in real time. Using physiologic data, 3-D objects are generated in digital space that represent physiologic changes within the body and show functional relationships that aid in the detection, diagnosis, and treatment of critical events. Preliminary testing results show statistically significant reduction in detection times. The research outcome, potential, and recently received NIH grant supporting the team’s scientific methods all point to the contributions that architecture may offer to the growing field of data visualization.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	3f35
authors	Bermudez, Julio and King, Kevin
year	2000
title	Media interaction and design process: establishing a knowledge base
source	Automation in Construction 9 (1) (2000) pp. 37-56
summary	Integrating computers in architectural design means to negotiate between centuries-old analog design methods and the new digital systems of production. Analog systems of architectural production use tracing paper, vellum, graphite and ink, clipboard, clay, balsa wood, plastic, metal, etc. Analog systems have also been termed "handmade", "manual", "material" or "physical". Digital systems of architectural production use scanning, image manipulation, visualization, solid modeling, computer aided drafting, animation, rendering, etc. Digital systems have also been called "electronic", "computer-aided", "virtual", etc. The difficulty lies in the underdeveloped state of the necessary methods, techniques, and theories to relate traditional and new media. Recent investigations on the use of multiple iterations between manual and electronic systems to advance architectural work show promising results. However, these experiments have not been sufficiently codified, cross-referenced and third party tested to conform a reliable knowledge base. This paper addresses this shortcoming by bringing together reported experiences from diverse researchers over the past decade. This summary is informed by more than three years of continuous investigation in the impacts of analog-digital conversations in the design process. The goal is to establish a state-of-the-art common foundation that permits instructors, researchers and practitioners to refer to, utilize, test, criticize and develop. An appendix is included providing support for the paper's arguments.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	55f6
authors	Brown, André
year	2000
title	Alternative Histories: the creative application of VR in developing an architectural critique -
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 265-267
summary	The idea of the creative fake (not forgery) in architecture parallels the ideas of creative faking in other disciplines such as art and design. The idea developed here is to use the vehicle of the virtual world as a device for creative thinking through mature ‚what-if?’ scenarios. This paper explores the potential for virtual architectural environments to be developed in such a way that they can be used in the critical appraisal and understanding of architecture.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ga0019
id	ga0019
authors	Ceccato, Cristiano
year	2000
title	On the Translation of Design Data into Design Form in Evolutionary Design
source	International Conference on Generative Art
summary	The marriage of advanced computational methods and new manufacturing technologies give rise to new paradigms in design process and execution. Specifically, the research concerns itself with the application of Generative and Evolutionary computation to the production of mass-customized products and building components. The work is based on the premise that CAD-CAM should evolve into a dynamic, intelligent, multi-user environment that encourages creativity and actively supports the evolution of individual, mass-customized designs that exhibit common features. The concept of Parametric Design is well established, and chiefly concerns itself with generating design sets that exists within the boundaries of pre-set parametric values. Evolutionary Design extends the notion of parametric control by using rule-based generative algorithms to evolve common families of individual design solutions. These can be optimized according to particular criteria, or can form a wide variety of hierarchically related design solutions, while supporting design intuition. The integration of Evolutionary Design with CAD-CAM, in particular the areas of flexible manufacturing and mass-customization, creates a unique scenario which exploits the full power of both approaches to create a new design-process paradigm that can generate limitless possibilities in a non-deterministic manner within a variable search-space of possible solutions.This paper concerns itself with the technical and philosophical aspects of the codification, generation and translation of data within the evolutionary-parametric design process. The efficiency and relevance of different methods for treating design data form the most fundamental aspect within the realm of CAD/CAM and are crucial to the successful implementation of Evolutionary Design mechanisms. This begins at the level of seeding and progresses through the entire evolutionary sequence, including the codification for evaluation criteria. Furthermore, the integration of digital design mechanisms with CAM and CNC technologies requires further translation of data into manufacturable formats. This paper examines different methods available to system designers and discussed their effect on new paradigms of digital design methods.
keywords	Evolutionary, Parametric, Generative, Data, Format, Objects, Codification
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

For more results click below: