Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 742

Reformat results as: short short into frame detailed detailed into frame

_id	30c8
authors	Koutamanis, A., Barendse, P.B74 and Kempenaar, J.W.
year	1999
title	Web-based CAAD Instruction: The Delft Experience
doi	https://doi.org/10.52842/conf.ecaade.1999.159
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 159-168
summary	In the early 1990s, the introduction of an extensive CAAD component in the compulsory curriculum of the Faculty of Architecture, Delft University of Technology, stimulated experimentation with computer-based instruction systems. The emergence of the World Wide Web presented new possibilities. Nevertheless, the reasons for investing in Web-based CAAD instruction were mostly pragmatic, i.e. a reaction to necessity, rather than an intention to explore, experiment and revolutionize. One of the problems addressed in our Web-based CAAD instruction is CAAD literacy. Help files and manuals that accompany software have proven to be unsuitable for introductory courses in design computing. This led to the development of a series of dynamic Web-based tutorials, in the form of interactive slide shows. The implementation of the tutorials is based on a cooperative framework that allows teachers and students to contribute at different levels of technical and methodical complexity. The use of the Web in CAAD education also stimulated a more active attitude among students. Despite the limited support and incentives offered by the Faculty, the Web-based CAAD courses became an invitation to intelligent and meaningful use of Web technologies by students for design presentation and communication. This is not only a useful addition to the opportunities offered by CAAD systems but also a prerequisite to new design communities.
keywords	WWW Technologies, Teaching
series	eCAADe
email
last changed	2022/06/07 07:51

_id	bf97
authors	Roberts, Andrew and Counsell, John
year	1999
title	The BEATL Project: Embedding Appropriate CAL in the Teaching of Architecture
doi	https://doi.org/10.52842/conf.ecaade.1999.334
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 334-340
summary	This paper is based upon the premise that Computer Aided Learning (CAL) has been poorly integrated into schools of Architecture and it identifies some of the barriers that have prevented this. The Built Environment Appropriate Technology for Learning (BEATL) project aims to promote a climate of change within which these barriers can be crossed. The focus of BEATL is on providing a framework within which technology assisted teaching can be adopted for particular elements of taught courses through a process of module pairing, and collaboration between Built Environment faculties at three UK Universities. The paper discusses the early stages of the Project and outlines the methodologies developed for embedding and transferring innovations between institutions, the support of 'Educational Technology Officers' and the evaluation strategies being utilised. Early results indicate the benefits of a focus on a individual element rather than a whole module and that generic innovations tend to be more successfully transferred than 'off the shelf' Computer Aided Learning products.
keywords	CAL, Integration, Transferability, Collaboration
series	eCAADe
email
last changed	2022/06/07 07:56

_id	c056
authors	Tsou, Jin-Yeu and Chow, Benny
year	1999
title	Team Orientated Knowledge Construction for Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1999.292
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 292-300
summary	Information Technology is always more accessible when we trying to imagine what the IT could be actually used. This situation is even more noticeable in the architecture field, and there are various technologies that have failed on delivering urgent needed education quality. Meanwhile, the tradition architecture education is evolving rapidly under the concepts of problem-based approach, knowledge reconstruction, and self-guided learning. "Education without institutional boundary" happens everyday in the classroom, and multi-direction learning modes have replaced the traditional single-direction teaching approach. The role of IT in the curriculum of architectural design education has become a subject of debate, scrutiny and experimentation in architectural schools. This paper will first outline the theory of applying team-oriented knowledge construction approach into studio teaching, the setup of our integrated digital design media environment is introduced; organization issue regarding the team formation and studio coordination is discussed; case studies are illustrated for demonstrating the methodology applied; and the student feedback is summarized to analysis the effectiveness of the approach.
keywords	Multimedia, CD-ROM, Problem-Based Learning, Team-Orientated Learning, Constructivist Learning
series	eCAADe
email
last changed	2022/06/07 07:57

_id	5227
authors	Bessone, Miriam and Mantovani, Graciela
year	2000
title	Procesos Proyectuales Alternativos: em el Inicio del Aprendizaje del Diseño Arquitectonico (Alternative Design Processes: At an Early Stage in the Learning of Architectural Design)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 364-366
summary	Building of knowledge and the traditional methods to approach it are changed by new technologies. The coexistence of two cultures, one of them based on written text and the other multitextual, are presented as an interesting exploring field. Accordingly, improvement in building of design learning, “new logics of perception” and “new projectable logics, are the main challenges to be addressed in a Research - Action Programme in harmonious interaction between both cultures and their instruments (analogous and digitals). Recognizing the existence of fields teachers are not trained in, an interaction teacher - pupil in didactic strategies is considered to be necessary.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	f85d
authors	Geraedts, Rob P and Pollalis, Spiro N.
year	2001
title	Remote Teaching in Design Education - Educational and Organizational Issues and Experiences
doi	https://doi.org/10.52842/conf.ecaade.2001.305
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 305-310
summary	The Department of Real Estate and Project Management (BMVB) of the Faculty of Architecture at the Delft University of Technology has been working closely with Professor Spiro N. Pollalis of Harvard University, Graduate School of Design in Cambridge, USA since 1991. His case-based interactive seminars about the management of the design & construction process have been highly appreciated by many generations of students. In Spring 2000, Pollalis suggested to extend the scope of his involvement by introducing a remote teaching component, the subject of his research in the last few years. As Information and Communication Technology (ICT) in the Design and Construction Industry is part of his lectures, it was appropriate to provide the students with a first hand experience on the subject. In the following experiment, the teacher would remain in his office at Harvard while the interactive work and discussion sessions with 130 students in a full lecture room would take place in Delft as planned. The consequences this experiment has had for the course, for the techniques and facilities used, how teachers and students experienced these, and which conclusions and recommendations can be made, are the topics of this paper.
keywords	Remote Teaching, Design & Construction Education, And ICT
series	eCAADe
last changed	2022/06/07 07:51

_id	c6db
authors	Heylighen, Ann
year	2000
title	In Case of Architectural Design. Critique and Praise of Case-Based Design in Architecture
source	Dissertation - Doct. Toegepaste wetenschappen, KU Leuven, Fac. Toegepaste wetenschappen, Dep. architectuur, stedebouw en ruimtelijke ordening (ISBN 90-5682-248-9)
summary	Architects are said to learn design by experience. Learning design by experience is the essence of Case-Based Design (CBD), a sub-domain of Artificial Intelligence. Part I critically explores the CBD approach from an architectural point of view, tracing its origins in the Theory of Dynamic Memory and highlighting its potential for architectural design. Seven CBD systems are analysed, experienced architects and design teachers are interviewed, and an experiment is carried out to examine how cases affect the design performance of architecture students. The results of this exploration show that despite its sound view on how architects acquire (design) knowledge, CBD is limited in important respects: it reduces architectural design to problem solving, is difficult to implement and has to contend with prejudices among the target group. With a view to stretching these limits, part II covers the design, implementation and evaluation of DYNAMO (Dynamic Architectural Memory On-line). This Web-based design tool tailors the CBD approach to the complexity of architectural design by effecting three transformations: extending the concern with design products towards design processes, turning static case bases into dynamic memories and upgrading users from passive case consumers to active case-based designers.
keywords	Architectural Design; Case-Based Design
series	thesis:PhD
email
last changed	2002/12/14 19:29

_id	0beb
authors	Koch, Volker and Russell, Peter
year	2000
title	VuuA.Org: The Virtual Upperrhine University of Architecture
doi	https://doi.org/10.52842/conf.ecaade.2000.023
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 23-25
summary	In 1998, architecture schools in the three nation region of the upper Rhine came together to undertake a joint design studio. With the support of the Center for Entrepeneurship in Colmar, France, the schools worked on the reuse of the Kuenzer Mill situated near Herbolzheim, Germany. The students met jointly three times during the semester and then worked on the project at their home universities usng conventional methods. This project was essential to generating closer ties between the participating students, tutors and institutions and as such, the results were quite positive. So much so, that the organisers decided to repeat the exercise one year later. However, it became clear that although the students had met three times in large groups, the real success of a co-operative design studio would require mechanisms which allow far more intimate interaction among the participants, be they students, teachers or outside experts. The experiences from the Netzentwurf at the Institut für Industrielle Bauproduktion (ifib) showed the potential in a web based studio and the addition of ifib to the three nation group led to the development of the VuuA platform. The first project served to illuminate the the differences in teaching concepts among the partner institutions and their teaching staff as well as problems related to the integration of students from three countries with two languages and four different faculties: landscape architecture, interior design, architecture and urban planning. The project for the Fall of 1999 was the reuse of Fort Kléber in Wolfisheim by Strasbourg, France. The students again met on site to kick off the Semester but were also instructed to continue their cooperation and criticism using the VuuA platform.
keywords	Virtual Design Studio, CSCW, International Cooperation, Planning Platform
series	eCAADe
email
more	http://www.vuua.org
last changed	2022/06/07 07:51

_id	ee92
authors	Papanikolaou Maria and Tuncer, Bige
year	1999
title	The Fake.Space Experience - Exploring New Spaces
doi	https://doi.org/10.52842/conf.ecaade.1999.395
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 395-402
summary	Fake.space is an elective CAAD course in which teachers and students form an online community. It is a Web-based communication environment for the exchange of ideas on the concept of space. Fake.space is also a narrative structure consisting of threads of nodes created by students. These nodes present different aspects of space. Fake.space represents our current generation of teaching environments. In this paper we describe and analyse its latest incarnation and discuss our aims and thoughts for further development. We believe that fake.space reflects on a future where online environments entice the students in a playful way to work with computers and CAD and consider the role of networked environments in architectural space.
keywords	Online Community, Learning Environment, Identity, Transparency, Visualisation
series	eCAADe
email
more	http://space.arch.ethz.ch/ws98/
last changed	2022/06/07 08:00

_id	sigradi2009_806
id	sigradi2009_806
authors	Sánchez Cavazos, Maria Estela
year	2009
title	Modernismo, fundamento del Diseño Digital [Modernism, fundament of the Digital Design]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	In this paper, the results of various investigations realized in the UAA and UANL have been gathered, since the year 2000, where the practice of architectonic design has been studied with and without computer, with the purpose of preparing students and teachers about the way of learning to do architectonic design with the new digital technologies. To explain the transformations that the architectonic Design has suffered with the use of the computer, a summarized table has been realized to show the roll that Modernism plays in the transition period between traditional and digital design.
keywords	Modernism; Digital Design; Architectonic design; Computer Assisted Design; International Style
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	8948
authors	Bertola Duarte, Rovenir
year	2001
title	AS APROXIMAÇÕES DO COMPUTADOR AO PROCESSO DE ENSINO/ APRENDIZADO DO PROJETO ARQUITETÔNICO (An Approach to Computing in the Teaching/Learning Proces in Architectural Project Design)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 207-209
summary	This article seeks to disclose part of the results obtained with the development of the master dissertation. (DUARTE [2], 2000) The several approach forms between the computers and the process teaching/learning of architectural design were investigated in this work, standing out, close moment the edict of MEC that regulated the introduction of the computers in the architecture schools in Brazil. Ten Brazilian schools of architecture were researched, through questionnaires and visits, in which four approach forms were detected, that were understood more deeply with a study of cases, highlighting: methods, supports, components and the teaching process and the design process built by the student.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	4e0a
authors	Bouchlaghem, N., Sher, W. and Beacham, N.
year	2000
title	Computer Imagery and Visualization in Civil Engineering Education
source	Journal of Computing in Civil Engineering, Vol. 14, No. 2, April 2000, pp. 134-140
summary	Higher education institutions in the United Kingdom have invested significantly in the implementation of communication and information technology in teaching, learning, and assessment of civil and building engineering—with mixed results. This paper focuses on the use of digital imagery and visualization materials to improve student understanding. It describes ways in which these materials are being used in the civil and building engineering curriculum, and, in particular, how distributed performance support systems (DPSS) can be applied to make more effective use of digital imagery and visualization material. This paper centers on the extent to which DPSS can be used in a civil and building vocational and continuing professional development context by tutors in the form of an electronic course delivery tool and by students in the form of an open-access student information system. This paper then describes how a DPSS approach to education is being adopted at Loughborough University as part of the CAL-Visual project. After highlighting the main aims and objectives of the project and describing the system, this paper discusses some of the issues encountered during the design and implementation of a DPSS and presents some preliminary results from initial trials.
keywords	Computer Aided Instruction; Engineering Education; Imaging Techniques; Information Systems; Professional Development
series	journal paper
last changed	2003/05/15 21:45

_id	cef3
authors	Bridges, Alan H.
year	1992
title	Computing and Problem Based Learning at Delft University of Technology Faculty of Architecture
doi	https://doi.org/10.52842/conf.ecaade.1992.289
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 289-294
summary	Delft University of Technology, founded in 1842, is the oldest and largest technical university in the Netherlands. It provides education for more than 13,000 students in fifteen main subject areas. The Faculty of Architecture, Housing, Urban Design and Planning is one of the largest faculties of the DUT with some 2000 students and over 500 staff members. The course of study takes four academic years: a first year (Propaedeuse) and a further three years (Doctoraal) leading to the "ingenieur" qualification. The basic course material is delivered in the first two years and is taken by all students. The third and fourth years consist of a smaller number of compulsory subjects in each of the department's specialist areas together with a wide range of option choices. The five main subject areas the students may choose from for their specialisation are Architecture, Building and Project Management, Building Technology, Urban Design and Planning, and Housing. The curriculum of the Faculty has been radically revised over the last two years and is now based on the concept of "Problem-Based Learning". The subject matter taught is divided thematically into specific issues that are taught in six week blocks. The vehicles for these blocks are specially selected and adapted case studies prepared by teams of staff members. These provide a focus for integrating specialist subjects around a studio based design theme. In the case of second year this studio is largely computer-based: many drawings are produced by computer and several specially written computer applications are used in association with the specialist inputs. This paper describes the "block structure" used in second year, giving examples of the special computer programs used, but also raises a number of broader educational issues. Introduction of the block system arose as a method of curriculum integration in response to difficulties emerging from the independent functioning of strong discipline areas in the traditional work groups. The need for a greater level of selfdirected learning was recognised as opposed to the "passive information model" of student learning in which the students are seen as empty vessels to be filled with knowledge - which they are then usually unable to apply in design related contexts in the studio. Furthermore, the value of electives had been questioned: whilst enabling some diversity of choice, they may also be seen as diverting attention and resources from the real problems of teaching architecture.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	9384
authors	Burry, M., Datta, S. and Anson, S.
year	2000
title	Introductory Computer Programming as a Means for Extending Spatial and Temporal Understanding
doi	https://doi.org/10.52842/conf.acadia.2000.129
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 129-135
summary	Should computer programming be taught within schools of architecture? Incorporating even low-level computer programming within architectural education curricula is a matter of debate but we have found it useful to do so for two reasons: as an introduction or at least a consolidation of the realm of descriptive geometry and in providing an environment for experimenting in morphological time-based change. Mathematics and descriptive geometry formed a significant proportion of architectural education until the end of the 19th century. This proportion has declined in contemporary curricula, possibly at some cost for despite major advances in automated manufacture, Cartesian measurement is still the principal ‘language’ with which to describe building for construction purposes. When computer programming is used as a platform for instruction in logic and spatial representation, the waning interest in mathematics as a basis for spatial description can be readdressed using a left-field approach. Students gain insights into topology, Cartesian space and morphology through programmatic form finding, as opposed to through direct manipulation. In this context, it matters to the architect-programmer how the program operates more than what it does. This paper describes an assignment where students are given a figurative conceptual space comprising the three Cartesian axes with a cube at its centre. Six Phileban solids mark the Cartesian axial limits to the space. Any point in this space represents a hybrid of one, two or three transformations from the central cube towards the various Phileban solids. Students are asked to predict the topological and morphological outcomes of the operations. Through programming, they become aware of morphogenesis and hybridisation. Here we articulate the hypothesis above and report on the outcome from a student group, whose work reveals wider learning opportunities for architecture students in computer programming than conventionally assumed.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	8802
authors	Burry, Mark, Dawson, Tony and Woodbury, Robert
year	1999
title	Learning about Architecture with the Computer, and Learning about the Computer in Architecture
doi	https://doi.org/10.52842/conf.ecaade.1999.374
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 374-382
summary	Most students commencing their university studies in architecture must confront and master two new modes of thought. The first, widely known as reflection-in-action, is a continuous cycle of self-criticism and creation that produces both learning and improved work. The second, which we call here design making, is a process which considers building construction as an integral part of architectural designing. Beginning students in Australia tend to do neither very well; their largely analytic secondary education leaves the majority ill-prepared for these new forms of learning and working. Computers have both complicated and offered opportunities to improve this situation. An increasing number of entering students have significant computing skill, yet university architecture programs do little in developing such skill into sound and extensible knowledge. Computing offers new ways to engage both reflection-in-action and design making. The collaboration between two Schools in Australia described in detail here pools computer-based learning resources to provide a wider scope for the education in each institution, which we capture in the phrase: Learn to use computers in architecture (not use computers to learn architecture). The two shared learning resources are Form Making Games (Adelaide University), aimed at reflection-in-action and The Construction Primer (Deakin University and Victoria University of Wellington), aimed at design making. Through contributing to and customising the resources themselves, students learn how designing and computing relate. This paper outlines the collaborative project in detail and locates the initiative at a time when the computer seems to have become less self-consciously assimilated within the wider architectural program.
keywords	Reflection-In-Action, Design Making, Customising Computers
series	eCAADe
email
last changed	2022/06/07 07:54

_id	f97e
authors	Commission of the European Communities
year	2001
title	The e-learning action plan: designing tomorrow’s education
source	Communication from the Commission to the Council and the EuropeanParliament, COM(2001) 172 final, 28 March 2001
summary	The "eLearning: Designing tomorrow's education" initiative1 was adopted by the European Commission on 24 May 2000. Following up the conclusions of the Lisbon European Council, it set out the principles, objectives and lines of action of eLearning, defined as the use of new multimedia technologies and the Internet to improve the quality of learning by facilitating access to resources and services as well as remote exchanges and collaboration. The eLearning initiative was welcomed by the Ministers of Education and by the Feira European Council in June 2000. The eLearning initiative is part of the comprehensive eEurope Action Plan2, the aim of which is to allow Europe to exploit its strengths and overcome the barriers holding back the uptake of digital technologies. It also falls in with the Report on the concrete future objectives of education systems3 by adopting information and communication technology development as one of its objectives. The effectiveness of education systems depends entirely on the effectiveness of the approaches to teaching and learning. In order to be effective, the introduction of information and communication technologies will have to be accompanied by a far-reaching reorganisation of learning structures. The eLearning initiative is also of relevance for the candidate countries given the interest they have shown for the eEurope action plan.
series	other
last changed	2003/04/23 15:50

_id	4915
authors	Counsell, J.A. and Marshall, D.J.
year	2000
title	Computer Based Quizzes to Test Understanding of Videos on Building Construction and the BEATL Project
doi	https://doi.org/10.52842/conf.ecaade.2000.117
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 117-120
summary	BEATL (Built Environment Appropriate Technology for Learning) is a research project based on a process of module pairing and collaboration between Built Environment Faculties. It is more about how one can embed technology in pedagogically sound ways than about the technology itself. This paper describes a case study of innovative self-paced diagnostic on-line illustrated Quizzes introduced at the University of the West of England (UWE) last year and now partnered by the University of Westminster (WU). It focuses on the development of the innovation, embedding it in teaching at UWE, its transfer to WU, and the support of “Educational Technology Officers” (ETO) in each. The methodologies used for evaluating the costs and benefits of this innovation are discussed.
keywords	Formative Assessment, CAL, Video, BEATL, Embedment
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:56

_id	1429
authors	Da Rosa Sampaio, Andréa and Borde, Andréa
year	2000
title	Será que na Era Digital o Desenho Ainda é a Marca Pessoal do Arquiteto? (Will Drawings still be the Architect's Individual Mark in Digital Era?)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 383-387
summary	Technological innovations are driven in such dynamism, which do not favour a reflective process. Novelty is absorbed, in many cases, without criticism, in an immediate way. Concerning Architectural and Urbanism Education, a systematic reflection on the impact of new information technology to students training should not be omitted. As visual codes are the prime expression of architects, it is important to evoke the assumption of drawing as a language in order to evaluate it in regard to the new reality. Intending to broaden the discussion on these issues and to pose in theoretical means practical matters on didactics, it will be investigated the implications of computational resources - specially CAD systems - in graphic expression, in design thinking and their consequences to the education of future architects. Learning visual thinking, and being skillful at traditional as much as digital means, challenges today’s student.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	0cc1
authors	Dave, Bharat and Danahy, John
year	2000
title	Virtual study abroad and exchange studio
source	Automation in Construction 9 (1) (2000) pp. 57-71
summary	The digital design studio has an area of application where conventional media are incapable of being used; collaboration in learning, design and dialogue with people in places other than where one lives. This distinctive opportunity has lead the authors to explore a form of design brief and virtual design studio (VDS) format not well addressed in the literature. Instead of sharing the same design brief, students in this alternative format design a project in the other students' city and do not collaborate on the same design. Collaboration with other students takes the form of teaching each other about the city and culture served by the design. The authors discovered these studios produce a focus on site context that serves our pedagogical objectives – a blend of architectural, landscape architectural and urban design knowledge. Their students use a range of commercial CAD and computer supported collaborative work (CSCW) software common to that used in many VDS experiments reported on in the literature.However, this conventional use of technology is contrasted with a second distinctive characteristic of these studios, the use of custom software tools specifically designed to support synchronous and asynchronous three-dimensional model exchange and linked attribute knowledge. The paper analyzes some of the virtual design studio (VDS) work between the Swiss Federal Institute of Technology, the University of Toronto, and the University of Melbourne. The authors articulate a framework of VDS dimensions that structures their teaching and research.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	125a
authors	Dikbas, Attila
year	1999
title	An Evaluating Model for the Usage of Web-based Information Technology in Computer Aided Architectural Design and Engineering Education
doi	https://doi.org/10.52842/conf.ecaade.1999.349
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 349-352
summary	New technologies often reshape expectations, needs and Opportunities so as to develop strategic Plans for the implementation of Information Techniques in education and research. The widespread acceptance of the internet and more specifically the World Wide Web (WWW) has raised the awareness of educators to the potential for online education, virtual classrooms and even virtual universities. With the advent of computer mediated communication, especially the widespread adoption of the web as a publishing medium, educators see the advantages and potential of delivering educational material over the Internet. The Web offers an excellent medium for content delivery with full text, colour graphics support and hyperlinks. The Purpose of this paper is to present a model for the usage of web-based information technology in computer aided architectural design and engineering education. It involves the key features of a full educational system that is capable of offering the teacher and the student flexibility with which to approach their teaching and learning tasks in ways most appropriate to the architectural design and engineering education. Web-based educational system aims at creating quality in on-line educational materials taking collaboration, support, new skills, and, most of all, time. The paper concludes with a discussion of the benefits of such an education system suggesting directions for further work needed to improve the quality of architectural design and engineering education.
keywords	Web-based Information Technology, Online Education, Virtual Campus, Computer Aided Architectural Design, Engineering Education
series	eCAADe
last changed	2022/06/07 07:55

_id	2b39
authors	Duarte, Rovenir Bertola
year	2000
title	O Uso do Computador no Ensino de Projeto: (por) uma Avaliação (Or Use do Computer nonEnsino de Project: (by) uma Avaliaction)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 361-363
summary	The computer approaches to the discipline of project near the fifties, with the idea that all the systems and processes can be object of mathematical simulation. However in the last times, the computers were used more in drawings than in the projects, “CADrafting is uncommon (...) and CADesign is almost nonexistent...” (STEVEN, 1991). At the same time it happened a surprising approach with to architecture schools. It stimulated more methodological approaches, and the subject moved, placing the computer as element transformer. The computers have really been changing the production and generation of documents, but the question is if it has been altering the method or process of elaboration of ideas. After so much search in direction to the computers it is time of thinking what was gotten with them and the problems that accompanies him. The work search to discuss the subjects where the computer influences in the learning and the students’ development.
series	SIGRADI
email
last changed	2016/03/10 09:50

For more results click below: