Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 375

Reformat results as: short short into frame detailed detailed into frame

_id	7da7
authors	Benedetti, Cristina and Salvioni, Giulio
year	1999
title	The Use of Renewable Resource in Architecture: New Teaching Methodologies
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 751-756
doi	https://doi.org/10.52842/conf.ecaade.1999.751
summary	The program is organized into four parts. Each is very much connected, both logically and methodologically, so that the unit as a whole consists of a content and method of access that are not divided up. This method is not in a chronological order that simply goes in one direction, rather it allows the user to "refer back", in real time and in different directions. For the simple purpose of explanation, the sections of the program are listed as follows: (-) "Basic information" concerns the basics of bioclimatic and timber architecture. Without this knowledge, the other two sections would be difficult to understand; (-) "Actual buildings throughout the world"; give examples of architectural quality; they concretize the basics of bioclimatic and timber architecture; (-) "Students' Masters Theses", that follow on from the basic information and the learning experience "in the field", and guided by the lecturer, have a critical approach to actual buildings throughout the world. (-) A multimedia data-sheet organized to ensure a clear and straightforward presentation of information about the construction products. It relies on a tab-based navigation interface that gives users access to eight different stacked windows.
keywords	Architecture, Multimedia, Timber, Bioclimatic, Classification
series	eCAADe
email
last changed	2022/06/07 07:54

_id	8948
authors	Bertola Duarte, Rovenir
year	2001
title	AS APROXIMAÇÕES DO COMPUTADOR AO PROCESSO DE ENSINO/ APRENDIZADO DO PROJETO ARQUITETÔNICO (An Approach to Computing in the Teaching/Learning Proces in Architectural Project Design)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 207-209
summary	This article seeks to disclose part of the results obtained with the development of the master dissertation. (DUARTE [2], 2000) The several approach forms between the computers and the process teaching/learning of architectural design were investigated in this work, standing out, close moment the edict of MEC that regulated the introduction of the computers in the architecture schools in Brazil. Ten Brazilian schools of architecture were researched, through questionnaires and visits, in which four approach forms were detected, that were understood more deeply with a study of cases, highlighting: methods, supports, components and the teaching process and the design process built by the student.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cef3
authors	Bridges, Alan H.
year	1992
title	Computing and Problem Based Learning at Delft University of Technology Faculty of Architecture
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 289-294
doi	https://doi.org/10.52842/conf.ecaade.1992.289
summary	Delft University of Technology, founded in 1842, is the oldest and largest technical university in the Netherlands. It provides education for more than 13,000 students in fifteen main subject areas. The Faculty of Architecture, Housing, Urban Design and Planning is one of the largest faculties of the DUT with some 2000 students and over 500 staff members. The course of study takes four academic years: a first year (Propaedeuse) and a further three years (Doctoraal) leading to the "ingenieur" qualification. The basic course material is delivered in the first two years and is taken by all students. The third and fourth years consist of a smaller number of compulsory subjects in each of the department's specialist areas together with a wide range of option choices. The five main subject areas the students may choose from for their specialisation are Architecture, Building and Project Management, Building Technology, Urban Design and Planning, and Housing. The curriculum of the Faculty has been radically revised over the last two years and is now based on the concept of "Problem-Based Learning". The subject matter taught is divided thematically into specific issues that are taught in six week blocks. The vehicles for these blocks are specially selected and adapted case studies prepared by teams of staff members. These provide a focus for integrating specialist subjects around a studio based design theme. In the case of second year this studio is largely computer-based: many drawings are produced by computer and several specially written computer applications are used in association with the specialist inputs. This paper describes the "block structure" used in second year, giving examples of the special computer programs used, but also raises a number of broader educational issues. Introduction of the block system arose as a method of curriculum integration in response to difficulties emerging from the independent functioning of strong discipline areas in the traditional work groups. The need for a greater level of selfdirected learning was recognised as opposed to the "passive information model" of student learning in which the students are seen as empty vessels to be filled with knowledge - which they are then usually unable to apply in design related contexts in the studio. Furthermore, the value of electives had been questioned: whilst enabling some diversity of choice, they may also be seen as diverting attention and resources from the real problems of teaching architecture.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	567d
authors	Farrag, C., Pinna Braga, F. and Teixeira, P.
year	2000
title	Investigação de Metodologia de Ensino de Informática Aplicada à Arquitetura (Research on the Methodology for Teaching Computer Applications in Architecture)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 347-349
summary	Description of class research from 1997-2 to 2000-1 in “Applied Computing in Architecture” conducted in the sixth semester of the Architecture Program at Faculdade de Belas Artes de São Paulo. The study is intended to analyze, evaluate and discover new paradigms in the introduction/application of class methodologies of teaching the use of computer in the design process. Our intention is to verify the students natural understanding of the principles of 3D digital modeling by introducing new tools for defining space and form, using the computer as a communication/representation system, and not only as a mimetized production tool. The challenge was to find a natural syntony between the digital projectual process and the learning process. At the end of each semester we evaluated the results and redirected the class proposals.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	dba1
authors	Hirschberg, Urs and Wenz, Florian
year	2000
title	Phase(x) - memetic engineering for architecture
source	Automation in Construction 9 (4) (2000) pp. 387-392
summary	Phase(x) was a successful teaching experiment we made in our entry level CAAD course in the Wintersemester 1996/1997. The course was entirely organized by means of a central database that managed all the students' works through different learning phases. This set-up allowed that the results of one phase and one author be taken as the starting point for the work in the next phase by a different author. As students could choose which model they wanted to work with, the whole of Phase(x) could be viewed as an organism where, as in a genetic system, only the "fittest" works survived. While some discussion of the technical set-up is necessary as a background, the main topics addressed in this paper will be the structuring in phases of the course, the experiences we had with collective authorship, and the observations we made about the memes2 that developed and spread in the students' works. Finally we'll draw some conclusions in how far Phase(x) is relevant also in a larger context, which is not limited to teaching CAAD. Since this paper was first published in 1997, we have continued to explore the issues described here in various projects3 together with a growing number of other interested institutions worldwide. While leaving the paper essentially in its original form, we added a section at the end, in which we outline some of these recent developments.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	4d8d
authors	Kvan, Thomas
year	2000
title	Teaching Architecture, Learning Architecture. Technology in Support of Design Learning
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 181-190
doi	https://doi.org/10.52842/conf.caadria.2000.181
summary	In the many years of conferences on the teaching of computer skills or application of computers in design studios, we see discussions about the needs, methods and benefits of teaching the use of computer tools. A few of the papers review how students learn but none report how computer tools can be directly beneficial to the student's learning of design. This paper reviews design learning and illustrates how computer tools have been used to support learning.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ddssar0019
id	ddssar0019
authors	Madrazo, Leandro
year	2000
title	Networking: media, representation and architecture
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	In this paper we present a pedagogic work, carried out in a third year architecture course, focused on the relationship between teaching content and media. The subject-matter of the course is the concept of representation; an eminently philosophical issue which transcends the limits of a particular discipline. The media that have been used are mostly the web, along with other standard programs to process text and images, create models and animations. The core of this research work is the course ‘Sistemas de Representación’, which has taken place for the first time in the academic year 1999/00. The course is structured in six themes, each one standing for a system of representation: TEXT, FIGURE, OBJECT, IMAGE, SPACE and LIGHT. Within every system, a variety of topics dealing with the concept of representation are addressed in an interdisciplinary manner. A web based learning environment named NETWORKING has been created especially for the course. This environment allows students to perform a variety of collaborative works: drawing visual and linguistic relationships, developing further the works of other students, and participating in collective processes of form generation and space perception.
series	DDSS
last changed	2003/08/07 16:36

_id	d5a7
authors	Mark, E., Martens, B. and Oxman, R.
year	2002
title	Round Table Session on “Theoretical and Experimental Issues in the Preliminary Stages of Learning/Teaching CAAD”
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 205-212
doi	https://doi.org/10.52842/conf.ecaade.2002.205
summary	According to eCAADe’s mission, the exchange and collaboration within the area of computer aided architectural design education and research, while respecting the pedagogical and administrative approaches in the different schools and countries, can be regarded as a core activity. The current education session follows up on a round table discussion held at eCAADe 2000 in Weimar, Germany, which was continued in the form of a plenary session at eCAADe 2001, focusing on sharing ideas on a more progressive curriculum under the topic “The Ideal Computer Curriculum”. The primary objective for the 2002 education session is to engage participants in an active discussion, not the longer format presentation of prepared positions. The round-table itself is limited to short opening statements so as to ensure time is allowed for viewpoints to be exchanged and for the conference attendees to weigh in on the issues discussed. The panel will critique current patterns teaching of computer aided design in schools of architecture, a review of past practices with the potential for guiding future direction.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	bf97
authors	Roberts, Andrew and Counsell, John
year	1999
title	The BEATL Project: Embedding Appropriate CAL in the Teaching of Architecture
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 334-340
doi	https://doi.org/10.52842/conf.ecaade.1999.334
summary	This paper is based upon the premise that Computer Aided Learning (CAL) has been poorly integrated into schools of Architecture and it identifies some of the barriers that have prevented this. The Built Environment Appropriate Technology for Learning (BEATL) project aims to promote a climate of change within which these barriers can be crossed. The focus of BEATL is on providing a framework within which technology assisted teaching can be adopted for particular elements of taught courses through a process of module pairing, and collaboration between Built Environment faculties at three UK Universities. The paper discusses the early stages of the Project and outlines the methodologies developed for embedding and transferring innovations between institutions, the support of 'Educational Technology Officers' and the evaluation strategies being utilised. Early results indicate the benefits of a focus on a individual element rather than a whole module and that generic innovations tend to be more successfully transferred than 'off the shelf' Computer Aided Learning products.
keywords	CAL, Integration, Transferability, Collaboration
series	eCAADe
email
last changed	2022/06/07 07:56

_id	988d
authors	Russell, Peter and Forgber, Uwe
year	2000
title	The E-Talier: Inter-university Networked Design Studios
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 45-50
doi	https://doi.org/10.52842/conf.ecaade.2000.045
summary	The widespread infiltration of internet based variations of traditional areas of society (e-commerce, e-business, e-mail etc.) will not spare the halls of academia in its propagation. The term courseware is well nigh 20 years old and considerable research and development has been done in bringing network based distributed courses to university consortiums including those in architecture and civil engineering. Indeed, the European Commission has recently approved funding for a 3-year web-based virtual university of architecture and construction technology: the WINDS project led by the University of Ancona. Such attempts to create e-courses are largely an extension of typical courseware where the syllabus is quantified and divided into lessons for use by the students alone or in conjunction with their tutors and professors. This is quite adequate in conveying the base knowledge of the profession. However, the tenants of being an architect or engineer involve the deft use of that unwieldy named and deliciously imprecise tool called "design". Teaching design sooner or later involves the design studio: a pedagogically construed environment of simulation intended to train, not teach the skills of designing. This is fundamentally different from normal courseware. A network based design studio (Etalier) must be able to reflect the nature of learning design. Design studios typically involve specifically chosen design problems, researched supporting information to assist design decisions, focussed discussions, individual consultation and criticism, group criticism, public forums for presentation discussion and criticism as well as a myriad of informal undocumented communication among the students themselves. So too must an Etalier function. Essentially, it must allow collaboration through communication. Traditional barriers to collaboration include language, culture (both national and professional) and distance. Through the internet's capricious growth and the widespread use of English as a second language, the largest hurdle to attaining fruitful collaboration is probably cultural. In the case of an Etalier in a university setting, the cultural difficulties arise from administrative rules, the pedagogical culture of specific universities and issues such as scheduling and accreditation. Previous experiments with virtual design studios have demonstrated the criticality of such issues. The proposed system allows participating members to specify the degree and breadth with which they wish to partake. As opposed to specifying the conditions of membership, we propose to specify the conditions of partnership. Through the basic principal of reciprocity, issues such as accreditation and work load sharing can be mitigated. Further, the establishment of a studio market will allow students, tutors and professors from participating institutions to partake in studio projects of their choosing in accordance with their own constraints, be they related to schedule, expertise, legal or other matters. The paper describes these mechanisms and some possible scenarios for collaboration in the Etalier market.
keywords	e-Studio, Virtual Design Studio, Courseware, CSCW
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:56

_id	65f7
authors	Rügemer, Jörg and Russell, Peter
year	2000
title	Promise and Reality: The impact of the Virtual Design Studio on the Design and Learning Process in the Architectural Education
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 41-44
doi	https://doi.org/10.52842/conf.ecaade.2000.041
summary	In step with the popular trend of including virtual working methods and tools in the process of teaching, the Virtual Design Studio (VDS) has been developed by the Institute for Industrial Building Production (ifib), at the University of Karlsruhe over the past three years. Alongside the technical aspects of such a studio, the challenge persisted to incorporate computer based tools into the architectural design and planning process with the goal of enhancing the relationship between all participants. The VDS is being further developed and refined, experiencing regular changes in its organization and teaching methods. With the establishment of the Virtual Upperrhine University of Architecture (VuuA) and the introduction of the Virtual Design Studio into the curriculum of the Institute for Architectural Presentation and CAD (adai), BTU Cottbus, the VDS extended beyond the borders of a single architectural school, aiming towards a wide acceptance and use within architectural education institutions.
keywords	Virtual Design Studio, Education, Interactive Design Development, Team Processes
series	eCAADe
email
more	http://www.ifib.uni-karlsruhe.de/
last changed	2022/06/07 07:56

_id	caadria2000_000
id	caadria2000_000
authors	Tan, Beng-Kiang; Tan, Milton; Wong, Yunn-Chii (eds.)
year	2000
title	CAADRIA 2000
source	Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, 519 p.
doi	https://doi.org/10.52842/conf.caadria.2000
summary	Ever since the advent of computer graphics in the sixties, computer-aided architectural design (CAAD) has made a great impact in architectural education and practice. Its central role as a new media for the representation and analysis of designs will ensure that it will continue to do so. The teaching and research in CAAD in Asia have also been growing in scope and in quality. In the 21st century, the challenges of architectural education and practice in the new millennium will open up new fronts in CAAD research. This conference is an important platform to evaluate the challenge and opportunities and will enable researchers to exchange ideas and collaboration in projects with specific relevance to CADD for Asia. This compilation of 48 papers were elected through a blind review by an international panel and presented at the conference in Singapore on 18 - 19 May 2000. The chapters are organised according to the main topics covered by the conference -- Collaborative Design, Simulation, Design Education, Knowledge Representation, Design Process, Information Systems, Design Tools, Virtual Reality and Computer Media. The Collaborative Design section consists of papers which deal with Collaborative Design Process interfaces to databases, Collaborative Design System for Citizen Participation, Team Awareness in Collaboration and Computer Environment for supporting Design Collaboration. The Simulation section deals with lighting studies, colour assessment, simulation of urban growth patterns, dynamic simulations in buildings and way-finding. The Design Education section consists of papers on design pedagogy in design studios using computers, virtual studios and virtual learning. The Knowledge Representation section consists of papers that deal with knowledge-based systems, design representation and shape grammar. The Design Process section consists of papers on design process and cognition, design creativity and the computer media. The Information Systems section consists of papers on information navigation, information management, design information repository and databases. The Design Tools section consists of papers on design tools based on generative systems, a new method for 3D animation and movement-in-architectural-space representation. The Virtual Reality and Computer Media section deals with virtual reality applications and tools in architecture, designing virtual environments and computer media and visualization.
series	CAADRIA
last changed	2022/06/07 07:49

_id	c056
authors	Tsou, Jin-Yeu and Chow, Benny
year	1999
title	Team Orientated Knowledge Construction for Architectural Education
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 292-300
doi	https://doi.org/10.52842/conf.ecaade.1999.292
summary	Information Technology is always more accessible when we trying to imagine what the IT could be actually used. This situation is even more noticeable in the architecture field, and there are various technologies that have failed on delivering urgent needed education quality. Meanwhile, the tradition architecture education is evolving rapidly under the concepts of problem-based approach, knowledge reconstruction, and self-guided learning. "Education without institutional boundary" happens everyday in the classroom, and multi-direction learning modes have replaced the traditional single-direction teaching approach. The role of IT in the curriculum of architectural design education has become a subject of debate, scrutiny and experimentation in architectural schools. This paper will first outline the theory of applying team-oriented knowledge construction approach into studio teaching, the setup of our integrated digital design media environment is introduced; organization issue regarding the team formation and studio coordination is discussed; case studies are illustrated for demonstrating the methodology applied; and the student feedback is summarized to analysis the effectiveness of the approach.
keywords	Multimedia, CD-ROM, Problem-Based Learning, Team-Orientated Learning, Constructivist Learning
series	eCAADe
email
last changed	2022/06/07 07:57

_id	d267
authors	Verbeke, J. Provoost, T., Verleye, J., Nys, K., Van Zutphen, R., Achten, H., Turksma, A., Pittioni, G., Asanowicz, A., Jakimowicz A. and Af Klercker, J.
year	1999
title	AVOCAAD, The Experience
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 244-251
doi	https://doi.org/10.52842/conf.ecaade.1999.244
summary	The Leonardo da Vinci project AVOCAAD (Added Value of Computer Aided Architectural Design) aims at stimulating creative and experimental use of computers in the field of Architecture and Construction by the use of new technologies. For this purpose, a large set of exercises and exercise materials was developed and is now available through an interactive web-site. This allows regular students as well as architects in practice to continuously seek for a more interesting and inspiring use of computers and IC-technology, adding value in their own field of interest and work. The interactive web-site generates a virtual forum for exchange of ideas. The AVOCAAD partners as well as the newly joined partners are currently using and testing the available teaching materials (exercises, foreground and background information) with students. Moreover a small design exercise in the context of the project has been the theme of a workshop held at the AVOCAAD 1999 conference. Students and architects were asked to create a design in a predefined space based on experimental architectural music. This paper intends to report on the experiences we gained in using the interactive web-site, the exercises and also doing the workshop. We will address the pedagogical implications of issues like learning environment, continuous and distance learning, and focus on their impact towards CAAD curricula. Examples and results will illustrate the general framework.
keywords	AVOCAAD, CAAD, Creativity, LLL, ODL
series	eCAADe
email
more	http://www.avocaad.org
last changed	2022/06/07 07:58

_id	ecaade2015_237
id	ecaade2015_237
authors	Vrouwe, Ivo; Luyten, Laurens and Pak, Burak
year	2015
title	Teaching and Learning CAAD and CAM in a Fluid Era - Tools and Strategies for the Analysis and Synthesis of Ill-Defined Construction Problems
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 119-126
doi	https://doi.org/10.52842/conf.ecaade.2015.2.119
wos	WOS:000372316000015
summary	In this paper we discuss a series of tools and strategies to support learner-centred construction education in the complexity of the era today (Bauman, 2000). By using these tools in the education of CAD and CAM in construction education at universities for the arts, design and architecture, we aim to support the student in the abstract aspects of Bloom's (1956) cognitive learning domain. In order to present a coherent spectrum of educational tools and strategies, we start with the introduction of a tool for problem-analysis. The tool is explained by applying it to the context of spatial design construction, digital design and fabrication. Then we shortly discuss the process of design-evaluation. Next we introduce three models for design-synthesis. Afterwards, a test case is used to elaborate on the different tools and strategies which are tested and evaluated.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=d75a9f02-6f80-11e5-bc83-9bf4aa35f970
last changed	2022/06/07 07:58

_id	sigradi2004_027
id	sigradi2004_027
authors	Alfredo Stipech
year	2004
title	Enseñanza de la representación manual y digital, para arquitectos y diseñadores [Teaching Hand and Digital Representation to Architects and Designers]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The supremacy of the digital means of representation and communication and the resulting shift of the manual means in the field of design and architecture, have engendered multiple opinions and literature. They focus and analyze the virtues and risks, the losses and substitutions, and the different expressive, productive and conceptual results of their leading role in the creative process. Furthermore, if we consider both as two extremes, apparently opposed, a broad panorama of combinations and additions are produced by the emerging group of hybrid practices. This motivated the development of a research project in the Universidad Nacional del Litoral de Santa Fe, Argentina, under the Program CAI+D 2000 dealing with Design and the Analog – Digital Means. From this project emerged a collection of conceptual speculations and experimentations in the extended field of representation, extended by the incorporation of new means and hybridations, searching for new parameters and methods for professional training and practice. Key words: analog, digital, graphics, means, representation.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	60e7
authors	Bailey, Rohan
year	2000
title	The Intelligent Sketch: Developing a Conceptual Model for a Digital Design Assistant
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 137-145
doi	https://doi.org/10.52842/conf.acadia.2000.137
summary	The computer is a relatively new tool in the practice of Architecture. Since its introduction, there has been a desire amongst designers to use this new tool quite early in the design process. However, contrary to this desire, most Architects today use pen and paper in the very early stages of design to sketch. Architects solve problems by thinking visually. One of the most important tools that the Architect has at his disposal in the design process is the hand sketch. This iterative way of testing ideas and informing the design process with images fundamentally directs and aids the architect’s decision making. It has been said (Schön and Wiggins 1992) that sketching is about the reflective conversation designers have with images and ideas conveyed by the act of drawing. It is highly dependent on feedback. This “conversation” is an area worthy of investigation. Understanding this “conversation” is significant to understanding how we might apply the computer to enhance the designer’s ability to capture, manipulate and reflect on ideas during conceptual design. This paper discusses sketching and its relation to design thinking. It explores the conversations that designers engage in with the media they use. This is done through the explanation of a protocol analysis method. Protocol analysis used in the field of psychology, has been used extensively by Eastman et al (starting in the early 70s) as a method to elicit information about design thinking. In the pilot experiment described in this paper, two persons are used. One plays the role of the “hand” while the other is the “mind”- the two elements that are involved in the design “conversation”. This variation on classical protocol analysis sets out to discover how “intelligent” the hand should be to enhance design by reflection. The paper describes the procedures entailed in the pilot experiment and the resulting data. The paper then concludes by discussing future intentions for research and the far reaching possibilities for use of the computer in architectural studio teaching (as teaching aids) as well as a digital design assistant in conceptual design.
keywords	CAAD, Sketching, Protocol Analysis, Design Thinking, Design Education
series	ACADIA
last changed	2022/06/07 07:54

_id	f2f1
authors	Breen, Jack and Nottrot, Robert
year	2000
title	Project a2W. A Dialogue on New Media Perspectives
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 291-296
doi	https://doi.org/10.52842/conf.ecaade.2000.291
summary	This paper documents an initiative taking the form of a "dialogue". The format which has been developed is somewhat similar to that of the "conversation" which Mondrian conceived in 1919, taking place between two fictitious characters - A and B - discussing the new direction in art, which he called "Nieuwe Beelding" and which contributed to the "De Stijl" movement (the dialogue was followed later that year by a "trialogue" between X, Y and Z on a virtual walk taking them from the countryside to the city) 1 . This time the issue is not so much the evolvement of a new artistic or architectural style, but the role of "new media" in architecture... The present dialogue takes place between two fictitious media proponents ("Alpha" and "Omega"). They take turns questioning several issues and exchanging proposals... What are the values - and the promises - of computer supported instruments in creative design and research - concerning the art and science shaping the built environment? How do the present applications measure up, how do they compare to the expectations and ambitions expressed a number of years ago? The form of a dialogue means that issues and ideas, which are not often aired within the confines of academic discourse, can be played back and forth and a measure of exaggeration was intended from the beginning... This contribution does not in any way pretend to be all-inclusive. Rather, the paper is meant to put forward ideas and experiences - from the perspective of the Delft Media group, in practice, in teaching and in research - which may stimulate (or even irritate?) but will hopefully activate. The aim is to open up discussions, to allow other (hidden) agendas for the future to become more visible and to look for platforms for sharing concepts and fascinations, however improbable they might be...
keywords	A Dialogue on New Media
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	ac81
authors	Brown, A.G.P.
year	1991
title	Review of Building IT 2000
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.q2c
summary	Building IT2000 is a Building and Information Technology database which is presented in Hypertextformat. Its production has been co-ordinated by the CICA (the Construction Industry Computer Association), an independent association serving the needs of computer users, specifiers and suppliers in the Construction Industry. The stack is a collection of structured information prepared by a group of experts in computing and the construction industry. As such it represents an interesting advance from two points of view: (1.) It is a valuable source of information in its own right. It could provide a resource for students of architecture which could be used as a self-teaching package. (2.) It points a possible way forward for the development of similar hypertext based teaching packages which could be developed by academics within the European teaching community.
series	eCAADe
email
more	http://www.mediatecture.at/ecaade/91/brown.pdf
last changed	2022/06/07 07:50

For more results click below: