Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 749

Reformat results as: short short into frame detailed detailed into frame

_id	9832
authors	Martens, B. and Turk, Z.
year	2000
title	The Creation of a Cumulative Index on CAD: "CUMINCAD"
source	ACADIA Quarterly, vol. 19, no. 3, pp. 18-19
doi	https://doi.org/10.52842/conf.acadia.2000.018.2
summary	To researchers in many disciplines, Internet is quickly becoming the dominating environment to search for publications. Commercial bibliographic databases tend to be too general, are not up-to-date and require special skills and efforts to be searched. On the other hand research is also published on the Web that also enables collaborative creation ofreferences by the specialists in the field. CUMINCAD is such a bibliographic database and compiles papers related to Computer Aided (Architectural) Design. The database is available on the Web and allows searching and browsing in the ways usual on the Web. It provides a ”historical evolution” to learn from previous efforts and draws attention to older original works that could have been ignored because they could not be found on the Web. We believe that CUMINCAD will help focus future CAAD research andimprove the education.
keywords	CAAD-related Publications; Web-based Bibliographic Database; Conference Proceedings; Searchable Index; Grey Literature
series	ACADIA
email
last changed	2022/06/07 07:59

_id	08e1
authors	Martens, B. and Turk, Z.
year	2000
title	Work in Progress on CUMINCAD
source	ACADIA Quarterly, vol. 19, no. 4, pp. 25-26
doi	https://doi.org/10.52842/conf.acadia.2000.025
summary	This article follows up an earler publication in the ACADIA Quarterly (19:3 2000), in which the intial development of a “Cumulative Index on CAD“ is presented.
keywords	CAAD-related Publications; Web-based Bibliographic Database; Conference Proceedings; Searchable Index; Grey Literature
series	ACADIA
email
last changed	2022/06/07 07:59

_id	81f3
authors	Martens, Bob and Turk, Ziga
year	1999
title	Working Experiences with a Cumulative Index on CAD: "CUMINCAD"
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 327-333
doi	https://doi.org/10.52842/conf.ecaade.1999.327
summary	To researchers in every discipline, Internet is quickly becoming the dominating environment to do literature studies. Commercial bibliographic databases tend to be too general, are not up-to-date and require special skills and effort to be searched. On the other hand researchers also publish on the Web and collaboratively that can create indexes of relevant publications. CUMINCAD is a bibliographic index that compiles papers related to computer aided architectural design. Implemented with a database, it allows searching and browsing in the ways usual on the Web. It provides a "historical evolution" to learn from previous efforts and draws attention to older original works that could have been ignored because they could not be found on the Web otherwise. The authors believe that CUMINCAD will help focus future CAAD research and improve the education. CUMINCAD work started in 1998 and is available at www.fagg.uni-lj.si/cumincad/. This paper focusses on the design and development of the database and presents some ideas concerning its advanced use in the analysis of research efforts.
keywords	CAAD-related Publications, Web-based Bibliographic Database, Searchable Index, Retrospective CAAD Research
series	eCAADe
email
last changed	2022/06/07 07:59

_id	4cc0
authors	Bouchlaghem, N., Khosowshahi, F. and White, J.
year	2000
title	Virtual reality as a visualisation tool: Benefits and constraints
source	CIDAC, Volume 2 Issue 4 November 2000 pp. 216-224
summary	The benefits and applications of virtual reality (VR) in the construction industry have been investigated for almost a decade. However, the practical implementation of VR in the construction industry has yet to reach maturity owing to technical constraints. The need for effective information management presents challenges: both transfer of building data to, and organisation of building information within, the virtual environment require consideration. This paper reviews the applications and benefits of VR in the built environment field and reports on a collaboration between Loughborough University and South Bank University to overcome constraints on the use of the overall VR model for whole lifecycle visualisation. The work at each research centre is concerned with an aspect of information management within VR applications for the built environment, and both data transfer and internal data organisation have been investigated. In this paper, similarities and differences between computer-aided design (CAD) and VR packages are first discussed. Three different approaches to the creation of VR models during the design stage are identified and described, with a view to providing sharing understanding across the interdiscipliary groups involved. The suitable organisation of building information within the virtual environment is then further investigated. This work focused on the visualisation of the degradation of a building, through its lifespan, with the view to provide a visual aid for developing an effective and economic project maintenance programme. Finally consideration is given to the potential of emerging standards to facilitate an integrated use of VR. The convergence towards similar data structures in VR and other construction packages may enable visualisation to be better utilised in the overall lifecycle model.
keywords	Virtual Reality, Information Management, Data Exchange, 3D Modelling, 4D Visualisation
series	journal paper
last changed	2003/05/15 21:23

_id	389b
authors	Do, Ellen Yi-Luen
year	2000
title	Sketch that Scene for Me: Creating Virtual Worlds by Freehand Drawing
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 265-268
doi	https://doi.org/10.52842/conf.ecaade.2000.265
summary	With the Web people can now view virtual threedimensional worlds and explore virtual space. Increasingly, novice users are interested in creating 3D Web sites. Virtual Reality Modeling Language gained ISO status in 1997, although it is being supplanted by the compatible Java3D API and alternative 3D Web technologies compete. Viewing VRML scenes is relatively straightforward on most hardware platforms and browsers, but currently there are only two ways to create 3D virtual scenes: One is to code the scene directly using VRML. The other is to use existing CAD and modeling software, and save the world in VRML format or convert to VRML from some other format. Both methods are time consuming, cumbersome, and have steep learning curves. Pen-based user interfaces, on the other hand, are for many an easy and intuitive method for graphics input. Not only are people familiar with the look and feel of paper and pencil, novice users also find it less intimidating to draw what they want, where they want it instead of using a complicated tool palette and pull-down menus. Architects and designers use sketches as a primary tool to generate design ideas and to explore alternatives, and numerous computer-based interfaces have played on the concept of "sketch". However, we restrict the notion of sketch to freehand drawing, which we believe helps people to think, to envision, and to recognize properties of the objects with which they are working. SKETCH employs a pen interface to create three-dimensional models, but it uses a simple language of gestures to control a three-dimensional modeler; it does not attempt to interpret freehand drawings. In contrast, our support of 3D world creation using freehand drawing depend on users’ traditional understanding of a floor plan representation. Igarashi et al. used a pen interface to drive browsing in a 3D world, by projecting the user’s marks on the ground plane in the virtual world. Our Sketch-3D project extends this approach, investigating an interface that allows direct interpretation of the drawing marks (what you draw is what you get) and serves as a rapid prototyping tool for creating 3D virtual scenes.
keywords	Freehand Sketching, Pen-Based User Interface, Interaction, VRML, Navigation
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	fa1b
authors	Haapasalo, H.
year	2000
title	Creative computer aided architectural design An internal approach to the design process
source	University of Oulu (Finland)
summary	This survey can be seen as quite multidisciplinary research. The basis for this study has been inapplicability of different CAD user interfaces in architectural design. The objective of this research is to improve architectural design from the creative problem-solving viewpoint, where the main goal is to intensify architectural design by using information technology. The research is linked to theory of methods, where an internal approach to design process means studying the actions and thinking of architects in the design process. The research approach has been inspired by hermeneutics. The human thinking process is divided into subconscious and conscious thinking. The subconscious plays a crucial role in creative work. The opposite of creative work is systematic work, which attempts to find solutions by means of logical inference. Both creative and systematic problem solving have had periods of predominance in the history of Finnish architecture. The perceptions in the present study indicate that neither method alone can produce optimal results. Logic is one of the tools of creativity, since the analysis and implementation of creative solutions require logical thinking. The creative process cannot be controlled directly, but by creating favourable work conditions for creativity, it can be enhanced. Present user interfaces can make draughting and the creation of alternatives quicker and more effective in the final stages of designing. Only two thirds of the architects use computers in working design, even the CAD system is being acquired in greater number of offices. User interfaces are at present inflexible in sketching. Draughting and sketching are the basic methods of creative work for architects. When working with the mouse, keyboard and screen the natural communication channel is impaired, since there is only a weak connection between the hand and the line being drawn on the screen. There is no direct correspondence between hand movements and the lines that appear on the screen, and the important items cannot be emphasized by, for example, pressing the pencil more heavily than normally. In traditional sketching the pen is a natural extension of the hand, as sketching can sometimes be controlled entirely by the unconscious. Conscious efforts in using the computer shift the attention away from the actual design process. However, some architects have reached a sufficiently high level of skill in the use of computer applications in order to be able to use them effectively in designing without any harmful effect on the creative process. There are several possibilities in developing CAD systems aimed at architectural design, but the practical creative design process has developed during a long period of time, in which case changing it in a short period of time would be very difficult. Although CAD has had, and will have, some evolutionary influences on the design process of architects as an entity, the future CAD user interface should adopt its features from the architect's practical and creative design process, and not vice versa.
keywords	Creativity, Systematicism, Sketching
series	thesis:PhD
email
more	http://herkules.oulu.fi/isbn9514257545/
last changed	2003/02/12 22:37

_id	sigradi2023_467
id	sigradi2023_467
authors	Scheeren, Rodrigo and Sperling, David Moreno
year	2023
title	In between revolutions or the state of digital fabrication technologies in South America academia: a systematic and critical review
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 555–566
summary	The main objective of this article is to grasp how technologies, techniques, and concepts related to Digital Fabrication were applied by South American players, in academic production from 2000 to 2021, through pedagogical activities, design projects, manufacturing processes, prototypes, and artifacts. We conducted a systematic review of publications from SIGraDi and eCAADe conferences, by authors active in South America during the period, identified from the CumInCAD database using the following terms: digital fabrication, digital manufacturing, digital fabrication, digital fabrication, rapid prototyping, CAD/CAM, robot* and 3d print*. 260 articles met the final criteria for inclusion, organized from the combination of 10 categories. The results show the dissemination of information about digital fabrication in many countries, focused on different trends of research and innovation, allowing us to understand the evolution of technological appropriation, thus offering an in-depth overview of our situation over the past 20 years.
keywords	Digital Fabrication, Technological Appropriation, Systematic Review, Design Process, Digital Theory.
series	SIGraDi
email
last changed	2024/03/08 14:07

_id	caadria2006_573
id	caadria2006_573
authors	WEN-YEN TANG, SHENG-KAI TANG
year	2006
title	THE DEVELOPMENT OF A TACTILE MODELING INTERFACE
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 573-575
doi	https://doi.org/10.52842/conf.caadria.2006.x.o8n
summary	Recently, more and more researchers dedicated in the development of human computer interaction for CAD systems, such as gestural input of three dimensional coordinates (Lee, Hu, and Selker, 2005), flexible manipulation of NURBS objects (Cohen, Markosian, Zeleznik, Hughes, and Barzel, 1999; Emmerik, 1990), and the creation of force feedback (Wu, 2003). These research results indicated that the more intuitive control the device can provide in modeling process, the more creative solutions can be generated (Lee, Hu, and Selker, 2005; Schweikardt and Gross, 2000; Wu, 2003).
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	20ab
authors	Yakeley, Megan
year	2000
title	Digitally Mediated Design: Using Computer Programming to Develop a Personal Design Process
source	Massachusetts Institute of Technology, Department of Architecture
summary	This thesis is based on the proposal that the current system of architectural design education confuses product and process. Students are assessed through, and therefore concentrate on, the former whilst the latter is left in many cases to chance. This thesis describes a new course taught by the author at MIT for the last three years whose aim is to teach the design process away from the complexities inherent in the studio system. This course draws a parallel between the design process and the Constructionist view of learning, and asserts that the design process is a constant learning activity. Therefore, learning about the design process necessarily involves learning the cognitive skills of this theoretical approach to education. These include concrete thinking and the creation of external artifacts to develop of ideas through iterative, experimental, incremental exploration. The course mimics the Constructionist model of using the computer programming environment LOGO to teach mathematics. It uses computer programming in a CAD environment, and specifically the development of a generative system, to teach the design process. The efficacy of such an approach to architectural design education has been studied using methodologies from educational research. The research design used an emergent qualitative model, employing Maykut and Morehouses interpretive descriptive approach (Maykut & Morehouse, 1994) and Glaser and Strausss Constant Comparative Method of data analysis (Glaser & Strauss, 1967). Six students joined the course in the Spring 1999 semester. The experience of these students, what and how they learned, and whether this understanding was transferred to other areas of their educational process, were studied. The findings demonstrated that computer programming in a particular pedagogical framework, can help transform the way in which students understand the process of designing. The following changes were observed in the students during the course of the year: Development of understanding of a personalized design process; move from using computer programming to solve quantifiable problems to using it to support qualitative design decisions; change in understanding of the paradigm for computers in the design process; awareness of the importance of intrapersonal and interpersonal communication skills; change in expectations of, their sense of control over, and appropriation of, the computer in the design process; evidence of transference of cognitive skills; change from a Behaviourist to a Constructionist model of learning Thesis Supervisor: William J. Mitchell Title: Professor of Architecture and Media Arts and Sciences, School of Architecture and Planning
series	thesis:PhD
last changed	2003/02/12 22:37

_id	b0e7
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2000
title	The Re-Convergence of Art and Science: A Vehicle for Creativity
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 491-500
doi	https://doi.org/10.52842/conf.caadria.2000.491
summary	Ever-increasing complexity in product design and the need to deliver a cost-effective solution that benefits from a dynamic approach requires the employment and adoption of innovative design methods which ensure that products are of the highest quality and meet or exceed customers' expectations. According to Bronowski (1976) science and art were originally two faces of the same human creativity. However, as civilisation advances and works became specialised, the dichotomy of science and art gradually became apparent. Hence scientists and artists were born, and began to develop work that was polar opposite. The sense of beauty itself became separated from science and was confined within the field of art. This dichotomy existed through mankind's efforts in advancing civilisation to its present state. This paper briefly examines the relationship between art and science through the ages and discusses their relatively recent re-convergence. Based on this hypothesis, this paper studies the current state of the convergence between arts and sciences and examines the current relationship between the two by considering real world applications and products. The study of such products and their successes and impact they had in the marketplace due to their designs and aesthetics rather than their advanced technology that had partially failed them appears to support this argument. This text further argues that a re-convergence between art and science is currently occurring and highlights the need for accelerating this process. It is suggested that re-convergence is a result of new technologies which are adopted by practitioners that include effective visualisation and communication of ideas and concepts. Such elements are widely found today in multimedia and Virtual Environments (VEs) where such tools offer increased power and new abilities to both scientists and designers as both venture in each other's domains. This paper highlights the need for the employment of emerging computer based real-time interactive technologies that are expected to enhance the design process through real-time prototyping and visualisation, better decision-making, higher quality communication and collaboration, lessor error and reduced design cycles. Effective employment and adoption of innovative design methods that ensure products are delivered on time, and within budget, are of the highest quality and meet customer expectations are becoming of ever increasing importance. Such tools and concepts are outlined and their roles in the industries they currently serve are identified. Case studies from differing fields are also studied. It is also suggested that Virtual Reality interfaces should be used and given access to Computer Aided Design (CAD) model information and data so that users may interrogate virtual models for additional information and functionality. Adoption and appliance of such integrated technologies over the Internet and their relevance to electronic commerce is also discussed. Finally, emerging software and hardware technologies are outlined and case studies from the architecture, electronic games, and retail industries among others are discussed, the benefits are subsequently put forward to support the argument. The requirements for adopting such technologies in financial, skills required and process management terms are also considered and outlined.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	28f3
authors	Alvarado, R.G., Vildósola, G.V., Parra, J.C. and Jara, M.R.
year	2000
title	Creacion/Creatividad: Evaluando Diseños Arquitectónicos con Realidad Virtual (Creation/Creativity: Evaluating Architectural Designs by means of Virtual Reality)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 243-246
summary	¿Can the computer improves the architectural creativity? This question is explored through a Virtual-Reality system developed for the modeling of timber structures, based on parametric elements, constructive programming and immersive visualization on real-time. Making experiences of evaluation with advanced students of architecture, whose use the system in the beginning of projects, compared with other group use not the system. This research faces the possibilities to rationalizate part of the creative process in architecture, broading the role of computer and its contribution to quality of design, and extending the possibilities to teach and share the creation of project. It is argue that major potential in this field is the swiftness, formal variety and spatial living of design, challenging the differences between objective and subjective.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	f1bf
authors	Amorim, S.L., Soares Madeira Domingues, L.C., Pereira Nunes, R. and De Almeida Peixoto, L.
year	2000
title	Centro de Referência e Informação em Habitação - Infohab (Reference Center and Information on Housing - Infohab)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 55-57
summary	The Center of Reference and Information in Habitation - INFOHAB - is a project led for the ANTAC, that intends to facilitate the access to the technique information relative to all the aspects and subjects that are contained in the construction environment concept, through the captation, selection, organization and spreading this information, offering it in the Internet through a database permanently brought up to date with the reference and, always when authorized, with the complete works. The objective of this article is to present the project and to reflect on the possibilities offered for the Internet as a tool to fulfill some of its objectives, established in the broadcasting of the information and the technology and that they search to corroborate with the creation of the basic conditions to reach upper standards of quality in the information, the products and the jobs offered in the area of the civil construction, architecture and urbanism, considering the characterizes of this thematic area.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ga0013
id	ga0013
authors	Annunziato, Mauro and Pierucci, Piero
year	2000
title	Artificial Worlds, Virtual Generations
source	International Conference on Generative Art
summary	The progress in the scientific understanding/simulation of the evolution mechanisms and the first technological realizations (artificial life environments, robots, intelligent toys, self reproducing machines, agents on the web) are creating the base of a new age: the coming of the artificial beings and artificial societies. Although this aspect could seems a technological conquest, by our point of view it represent the foundation of a new step in the human evolution. The anticipation of this change is the development of a new cultural paradigm inherited from the theories of evolution and complexity: a new way to think to the culture, aesthetics and intelligence seen as emergent self-organizing qualities of a collectivity evolved along the time through genetic and language evolution. For these reasons artificial life is going to be an anticipatory and incredibly creative area for the artistic expression and imagination. In this paper we try to correlate some elements of the present research in the field of artificial life, art and technological grow up in order to trace a path of development for the creation of digital worlds where the artificial beings are able to evolve own culture, language and aesthetics and they are able to interact con the human people.Finally we report our experience in the realization of an interactive audio-visual art installation based on two connected virtual worlds realized with artificial life environments. In these worlds,the digital individuals can interact, reproduce and evolve through the mechanisms of genetic mutations. The real people can interact with the artificial individuals creating an hybrid ecosystem and generating emergent shapes, colors, sound architectures and metaphors for imaginary societies, virtual reflections of the real worlds.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ddssar0002
id	ddssar0002
authors	Aoki, Yoshitsugu and Inage, Makoto
year	2000
title	Linguistic Operation System for Design of Architectural Form
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	In a process of architectural design, an architect not only draws by himself/herself but also lets another person modify a design by given a linguistic instruction expressing how the design ought to be. In the case of utilization of CAD systems, it is useful if the system modifies the design according to the linguistic instruction. On the other hand, because of the recent increase of the opportunities of designing a building whose roof has complicated curved surface, it extremely takes labor to change the design. This paper proposes a linguistic operation system that modifies a design according to the linguistic instruction of the modification by the user to support design of a complicated form with curved surface. The proposed system is expected to be integrated with a CAD system. First, the system presents a perspective sketch of a designed form. From the values of the design variables that characterize the form in the system, the system calculates the position of the form in “the association image space.” Second, the designer puts a linguistic instruction i.e., words as like as “let it be more light” to modify the form. The words used for the instruction have the position in the association image space. In the association image space, the system moves the position of the form to a new position that gets to be near the position of the given word. The system calculates the values of the design variables of the form corresponding to the new position. We need a mapping from every vector representing the position of the changed form in the association image space to the corresponding vector representing the values of the design variables. To find the mapping, we construct a neural network system with three levels. Finally, the system presents a perspective sketch of changed form using the calculated values of design variables.
series	DDSS
last changed	2003/11/21 15:15

_id	86dc
authors	Aouad, G., and Price, A.D.F.
year	1993
title	An integrated system to aid the planning of concrete structures: introducing the system
source	The Int. Journal of Construction IT1(2), pp.1-14
summary	This paper reports on the development at Loughborough University of a CAD-based integrated model to aid the planning of in-situ concrete structures. The system development started after a review of the planning models currently available and after a detailed questionnaire survey undertaken amongst the top UK and US contractors on the current status of planning techniques and information technology. The main aim of this system is to automate the planning process of in-situ concrete structures using data generated by CAD systems. So far, the integration of a CAD system (AutoCAD 10) and a computerized scheduling system (Artemis 2000) has been achieved on a typical IBM-PC. This enables the generation of network plans using AutoCAD which are then automatically transferred to the Artemis system for time and cost analyses.Traditionally, construction planners are faced with many conventional drawings and documents which are used to re-extract information relevant to their planning processes. Such an approach can be very inefficient as it involves data double-handling and is often error prone. In addition, current computerized construction planning applications are little more than the automation of manual formulations of plans. For example, data are fed into the planning system and computations are performed using either CPM (Critical Path Method) or PERT (Programme Evaluation and Review Technique). However, data relating to the planning process such as activity lists, resources requirements and durations are not automatically generated within the system. It would thus seem logical to devise a CAD-based integrated planning model which accepts data in its electronic format and involves some integration of the traditional planning approach. This paper introduces the proposed CAD-based integrated planning model and describes its different components. In addition, it discusses the system functional specifications and summarizes the main benefits and limitations of such a model.
series	journal paper
last changed	2003/05/15 21:45

_id	1071
authors	Asanowicz, Aleksander
year	1999
title	Evolution of Computer Aided Design: Three Generations of CAD
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 94-100
doi	https://doi.org/10.52842/conf.ecaade.1999.094
summary	This paper describes the three generations of CAD systems. The first generation of (primarily analytical) computer programmes really aided designing. These programmes were the tools for finding a functional solution in different areas of designing, from flat plans to the space organisation of a hospital. One of the shortcomings of these programmes was the lack of graphic interface. With time, however, this kind of interface was developed. As a result of this second generation of CAD systems the computer was transformed into a drafting machine and CAD meant Computer Aided Drafting. The main thesis of this consideration is that only now we have the chance to return to the idea of Computer Aided Design. One of the examples of these trends is the AVOCAAD programme in which Added Value of CAAD is analysed. The development of the third generation of CAD systems will be possible in the near future. Aiding the process of designing will demand the elaboration of new methods of using the computer at the early stages of this process. The computer should be used not for generating variants of functional solutions only but for also for the creation of 3D forms by 3D sketching. For this, the computer should be transformed from a tool into a medium; only then will designing become true Designing in Cyber Space.
keywords	Generations of CAAD, Design Process, Creation, Medium
series	eCAADe
email
last changed	2022/06/07 07:54

_id	df49
authors	Barbosa, Adriana Simeone
year	2000
title	Roteiro e Interface: Elementos Fundamentais para a Representação das Cidades Virtuais - (Story-board and Interface: Fundamental Elements for the Virtual Cities Representaion)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 322-324
summary	This paper derives from the project "A Evolucao do Sistemas simbólicos da Cidade Latino-Americana" by the team at the Laboratório de Analises Graficas e Representaçio Digital, PROURB (Programa de Pósgraduacio em Urbanismo) at the Faculdade de Arquitetura e Urbanismo, Universidade Federal do Rio de Janeiro. In a period of five years the CD-ROMs Havana Colonial, Rio de Janeiro Colonial and the websites Um Palacio na Cidade and Favela-Bairro were produced. Based on that experience this paper intends to demonstrate that there was a conceptual and technological evolution related to representation and through the analysis of a few of the screens of the above mentioned works we will discuss the importance of integrating navigation script and creation of the interfaces through which the user accesses the product.
series	SIGRADI
last changed	2016/03/10 09:47

_id	1f5c
authors	Beesley, Philip and Seebohm, Thomas
year	2000
title	Digital Tectonic Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 287-290
doi	https://doi.org/10.52842/conf.ecaade.2000.287
summary	Digital tectonic design is a fresh approach to architectural design methodology. Tectonics means a focus on assemblies of construction elements. Digital tectonics is an evolving methodology that integrates use of design software with traditional construction methods. We see digital tectonic design as a systematic use of geometric and spatial ordinances, used in combination with details and components directly related to contemporary construction. The current approach will, we hope, lead to an architectural curriculum based on generative form making where the computer can be used to produce systems of forms algorithmically. Digital design has tended to remain abstract, emphasizing visual and spatial arrangements often at the expense of materials and construction. Our pursuit is translation of these methods into more fully realized physical qualities. This method offers a rigorous approach based on close study of geometry and building construction elements. Giving a context for this approach, historical examples employing systematic tectonic design are explored in this paper. The underlying geometric ordinance systems and the highly tuned relationships between the details in these examples offer design vocabularies for use within the studio curriculum. The paper concludes with a detailed example from a recent studio project demonstrating particular qualities developed within the method. The method involves a wide range of scales, relating large-scale gestural and schematic studies to detailed assembly systems. Designing in this way means developing geometric strategies and, in parallel, producing detailed symbols or objects to be inserted. These details are assembled into a variety of arrays and groups. The approach is analogous to computer-aided designÕs tradition of shape grammars in which systems of spatial relationships are used to control the insertion of shapes within a space. Using this approach, a three-dimensional representation of a building is iteratively refined until the final result is an integrated, systematically organized complex of symbols representing physical building components. The resulting complex offers substantial material qualities. Strategies of symbol insertions and hierarchical grouping of elements are familiar in digital design practice. However these strategies are usually used for automated production of preconceived designs. In contrast to thsse normal approaches this presentation focuses on emergent qualities produced directly by means of the complex arrays of symbol insertions. The rhyth
keywords	3D CAD Systems, Design Practice, 3D Design Strategies
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	e894
authors	Blanco, Constanza
year	2000
title	Un proyecto de gestión. La digitalizacion de los edificios escolares del Gobierno Autonomo de la Ciudad de Buenos Aires. (A management project. The Digitalization of School Buildings of the Autonomous Government of the City of Buenos Aires)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 185-187
summary	The operation target, of digital school building plans recording, in the area of the Education Secretary of Buenos Aires City, is to survey, organize and create the connectivity into a single database, for a great number of graphic and non graphic documents. The information stocked in vellum, paper, and blueprints, on different scales and formats, has been collected, classified and checked. A skillful cad operator staff, in a prolific environment generated by codes, rules and helped by several particular tools which include macros, routines and libraries, is doing the production of drawings. All the documents and their parent information, from any kind of source, establish the core of an important database. The new information scope has the flexibility and accessibility required for a permanent data updating and extension.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ae0f
authors	Ceccato, C., Simondetti, SA. and Burry, M.C.
year	2000
title	Mass-Customization in Design Using Evolutionary and Parametric Methods
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 239-244
doi	https://doi.org/10.52842/conf.acadia.2000.239
summary	This paper describes a project within the authors’ ongoing research in the field of Generative Design. The work is based on the premise that computer-aided design (CAD) should evolve beyond its current limitation of one-way interaction, and become a dynamic, intelligent, multi-user environment that encourages creativity and actively supports the evolution of individual, mass-customized designs which exhibit common features. The authors describe this idea by illustrating the implementation of a research project, which explores the notions of mass-customization in design by using evolutionary and parametric methods to generate families of simple objects, in our case a door handle. The project examines related approaches using both complex CAD/CAM packages (CADDS, CATIA) and a proprietary software tool for evolutionary design. The paper first gives a short historical and philosophical background to the work, then describes the technical and algorithmic requirements, and concludes with the implementations of the project.
series	ACADIA
email
last changed	2022/06/07 07:55

For more results click below: