Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 749

Reformat results as: short short into frame detailed detailed into frame

_id	ddssar0016
id	ddssar0016
authors	Koutamanis, Alexander and Mitossi, Vicky
year	2000
title	Grammatical and syntactic properties of CAAD representations for the early design stages
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	CAAD representations for the early design stages have traditionally focused on aspects apparently relating to design creativity, such as flexible, effortless and rich geometric modelling. However, modelling capabilities are generally unconnected to the control and analysis of design constraints that affect the further development of the design. These usually refer to functional and spatial aspects that are only implicit in a CAAD representation of design ‘solids’. Moreover, the stability and reliability of control and analysis rely on the grammatical and syntactic quality of the representation. In particular, (a) the grammatical well-formedness of spatial and building primitives, and (b) the syntactic completeness and unambiguity of spatial relations are essential prerequisites to any meaningful analysis of aspects such as fulfilment of programmatic requirements, indoor climate, lighting or human interaction with the built environment. The paper describes a dual spatial and building element representation implemented on top of a standard drawing system. The representation attempts to minimize input requirements, while at the same time providing feedback on the grammatical and syntactic quality of the design description.
series	DDSS
last changed	2003/08/07 16:36

_id	ga0005
id	ga0005
authors	Kubasiewicz, Jan and Jang, DK
year	2000
title	InfoGEOMETRY. Conceptual Prototype for Navigating InfoSPACE
source	International Conference on Generative Art
summary	InfoGEOMETRY is the word the authors use to describe the concept of utilizing geometric patterns and dynamic symmetry in graphical user interface design for navigating complex information. This paper refers to a specific collaborative project in which the concept of infoGeometry was first introduced as an alternative tool of information architecture. In their design process, the authors tried to reconcile the visual nature of geometric vocabulary with parametric nature of interface design and dynamic nature of information organization. The project resulted in experimental interactive tools for information search and navigating complex information structures. 2. YOU ARE HERE. A study in interactivity. This paper refers to a studio project in interface design, conducted at the Massachusetts College of Art in Boston, where individual designers explored essential concepts in navigating complex structures of information. Taking the notion of You-Are-Here as a point of departure, individual designers explored various definitions and interpretations of the notion's three components: You(We/They, etc)-Are(Will Be/Have Been, etc)-Here(in Time/in Space). Exploring specific instances of parametric design and developing linked, multiple representations for information display resulted in a broad spectrum of contexts associated with navigation. Specific descriptions of individual instances will accompany the final presentation of the project.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	f08d
authors	Abrahamson, S., Wallace, D., Senin, N. and Sferro, P.
year	2000
title	Integrated design in a service marketplace
source	Computer-Aided Design, Vol. 32 (2) (2000) pp. 97-107
summary	This paper presents a service marketplace vision for enterprise-wide integrated design modeling. In this environment, expert participants and product developmentorganizations are empowered to publish their geometric design, CAE, manufacturing, or marketing capabilities as live services that are operable over the Internet. Theseservices are made available through a service marketplace. Product developers, small or large, can subscribe to and flexibly inter-relate these services to embody adistributed product development organization, while simultaneously creating system models that allow the prediction and analysis of integrated product performance. It ishypothesized that product development services will become commodities, much like many component-level products are today. It will be possible to rapidly interchangeequivalent design service providers so that the development of the product and the definition of the product development organization become part of the same process.Computer-aided design tools will evolve to facilitate the publishing of live design services. A research prototype system called DOME is used to illustrate the concept and apilot study with Ford Motor Company is used in a preliminary assessment of the vision.
keywords	Integrated Modeling, System Modeling, Design Service Marketplace
series	journal paper
email
last changed	2003/05/15 21:33

_id	9d26
authors	Adriane Borda Da Silva, A., Félix, N.R., Magallón Lacarta, J.A., Serón Arbeloa, F.J.
year	2000
title	Da Representação à Modelagem (From Representation Towards Modeling)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 280-282
summary	This work intends to structure a conceptual and technical referential to guide the development of the “Post-Graduate Drawing Course - from traditional tracing to computer graphics” (DTGC-IFM,UFPel, RS, Brasil), related to the process of using the computer technology for problem-solving in graphics representation. The referential intends to evaluate the level of development, and also orientate the investments with qualification of the staff, hardware and software. This study refers only to the process of solving problems using computer graphics techniques for Geometric and Visual Modeling.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	6559
authors	Barrionuevo, Luis F. and Borsetti, Ricardo
year	2001
title	LA POTENCIALIDAD ESPACIAL DE LOS "SPIROLATERALS" EN LA ARQUITECTURA (The Spacial Potential of the "Spirolaterals" in Architecture)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 74-76
summary	“Spirolaterals” (Odds, 1973) are mathematical entities created by drawing a set of lines, the first at a unit length, then each additional line increasing by a value of certain longitude while turning a constant or variable direction. (Krawczyk, 2000) The objective of this work is to propose the use of spirolaterals as a geometric support to produce preliminary alternatives for architectural layouts. A computation program is implemented to demonstrate the automatic production of spatial spirolaterals: spirospace, and images of results are exposed.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	038b
authors	Barron, Alicia
year	2000
title	Generación de Objetos Autónomos en Mundos Virtuales (Generation of Autonomous Objects in Virtual Worlds)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 310-312
summary	The goal of this paper is to define the processes that enable the simulation of an autonomous pedestrian’s journeys in confined spaces; and to determine their paths beginning with random processes under preset parameters in a generic fashion as well as doing so in a manner independent from walking movement. We present a conceptual model designed to generate pedestrian journeys, taking into account the focuses of attraction and their influence in the paths taken. In order to implement this model, we add to an architectural blueprint the elements necessary to recognize the geometric characteristics of the World (Limits, Focuses and Portals) that affect the displacements of pedestrians. These characteristics enable us to determine the paths to be taken in the World. The issues of the simulation (the position that each pedestrian occupies for unit of time) can be used by other applications, to generate animations or to verify critical situations.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	1f5c
authors	Beesley, Philip and Seebohm, Thomas
year	2000
title	Digital Tectonic Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 287-290
doi	https://doi.org/10.52842/conf.ecaade.2000.287
summary	Digital tectonic design is a fresh approach to architectural design methodology. Tectonics means a focus on assemblies of construction elements. Digital tectonics is an evolving methodology that integrates use of design software with traditional construction methods. We see digital tectonic design as a systematic use of geometric and spatial ordinances, used in combination with details and components directly related to contemporary construction. The current approach will, we hope, lead to an architectural curriculum based on generative form making where the computer can be used to produce systems of forms algorithmically. Digital design has tended to remain abstract, emphasizing visual and spatial arrangements often at the expense of materials and construction. Our pursuit is translation of these methods into more fully realized physical qualities. This method offers a rigorous approach based on close study of geometry and building construction elements. Giving a context for this approach, historical examples employing systematic tectonic design are explored in this paper. The underlying geometric ordinance systems and the highly tuned relationships between the details in these examples offer design vocabularies for use within the studio curriculum. The paper concludes with a detailed example from a recent studio project demonstrating particular qualities developed within the method. The method involves a wide range of scales, relating large-scale gestural and schematic studies to detailed assembly systems. Designing in this way means developing geometric strategies and, in parallel, producing detailed symbols or objects to be inserted. These details are assembled into a variety of arrays and groups. The approach is analogous to computer-aided designÕs tradition of shape grammars in which systems of spatial relationships are used to control the insertion of shapes within a space. Using this approach, a three-dimensional representation of a building is iteratively refined until the final result is an integrated, systematically organized complex of symbols representing physical building components. The resulting complex offers substantial material qualities. Strategies of symbol insertions and hierarchical grouping of elements are familiar in digital design practice. However these strategies are usually used for automated production of preconceived designs. In contrast to thsse normal approaches this presentation focuses on emergent qualities produced directly by means of the complex arrays of symbol insertions. The rhyth
keywords	3D CAD Systems, Design Practice, 3D Design Strategies
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	792a
authors	Blaschke, Thomas and Tiede, Dirk
year	2003
title	Bridging GIS-based landscape analysis/modelling and 3D-simulation.Is this already 4D?
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Several studies have used remote sensing to map patterns of e.g. deforestation or to analyse the rates of land use change. Thesestudies have proven useful for interpreting the causes of urbanization, deforestation etc. and the impact of such changes on theregion. Monitoring of change (e.g. deforestation or reforestation) is frequently perceived as one of the most important contributionsof remote sensing technology to the study of global ecological and environmental change (Roughgarden et al. 1991). Manyresearchers believe that the integration of remote sensing techniques within analysis of environmental change is essential if ecologistsare to meet the challenges of the future, specifically issues relating to global change; however, in practice, this integration has so farbeen limited (Griffiths & Mather 2000). Considerable difficulties are encountered in linking, on the one hand, the biologies oforganisms and the ecologies of populations to the fluxes of material and energy quantifiable at the level of ecosystems. In this paper,we concentrate on the methodological aspects of the delineation of landscape objects and touch the ecological application onlysuperficially but we elucidate the potential of the proposed methodology for several ecological applications briefly.
series	other
email
last changed	2003/11/21 15:16

_id	f73b
authors	Brady, Darlene A.
year	2000
title	Percept vs. Precept: Digital Media & the Creative Process
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 261-264
doi	https://doi.org/10.52842/conf.ecaade.2000.261
summary	The design of architecture, as well as all of the arts, is a creative act concerned with the expression of ideas through culturally significant and relevant form. In order for the creative act to transcend the authority or dictates of precedents or trends, it must be informed and guided by a process and not a product; one which reveals, but does not dictate, expressive, functional form. The initial impact of digital media on architectural design has been the ability to render the look of a final project or to create shapes that reflect the facility of the tool. Digital media also enables the composition and structure of space and form to be discovered simultaneously and relationally with the phenomena of color and kinetics, to generate and visualize an idea as form, and to represent form as experience. This requires interweaving computing with a creative process in which percept, rather than precept, is the driving force of the investigation. This paper explores the role of ideation, tectonic color and kinetics as an intentional design strategy and formgiver for architecture. The role of the computer is to enable the designer to generate meaningful architecture beyond precepts of image and style. Design as a making in the mind uses our rational and imaginative faculties. Complete freedom is not a necessity for inventiveness. Research on creativity indicates that "constraining options and focusing thought in a specific, rigorous and discerning direction" play an important role. The key is a balance of structured and discursive inquiry that encourages a speculative, free association of ideas. Tim Berners-Lee, one of the creators of the World Wide Web, likened creativity to a weblike process that is nonlinear but also not random; which when placed in an environment rich with information will float ideas so the mind "can jiggle them into an insight." Geoffrey Vickers in his essay, "Rationality and Intuition" described this symbiotic relationship as "...two functions which in practice are never wholly separated but which are, nonetheless, logically distinct as two reciprocating phases in a recurrent process of mental activity." The rational is formative and intuition is generative; both are essential to creativity.
keywords	Percept, Creativity, Ideation, Tectonic Color, Kinetics
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	9e00
authors	Bridges, Alan
year	1999
title	Progress? What Progress?
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 321-326
doi	https://doi.org/10.52842/conf.ecaade.1999.321
summary	This paper briefly reviews some of the history of computer graphics standardisation and then presents two specific case studies: one comparing HTML with SGML and Troff and the other comparing VRML with the Tektronix® Interactive Graphics Language implementation of the ACM Core Standard. In each case, it will be shown how the essential intellectual work carried out twenty years ago still lies at the foundations of the newer applications.
keywords	SGML, HTML, VRML
series	eCAADe
email
last changed	2022/06/07 07:54

_id	0dc3
authors	Chambers, Tom and Wood, John B.
year	1999
title	Decoding to 2000 CAD as Mediator
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 210-216
doi	https://doi.org/10.52842/conf.ecaade.1999.210
summary	This paper will present examples of current practice in the Design Studio course of the BDE, University of Strathclyde. The paper will demonstrate an integrated approach to teaching design, which includes CAD among other visual communication techniques as a means to exploring design concepts and the presentation of complex information as part of the design process. It will indicate how the theoretical dimension is used to direct the student in their areas of independent study. Projects illustrated will include design precedents that have involved students in the review and assessment of landmarks in the history of design. There will be evidence of how students integrate DTP in the presentation of site analysis, research of appropriate design precedents and presentation of their design solutions. CADET underlines the importance of considering design solutions within the context of both our European cultural context and of assessing the environmental impact of design options, for which CAD is eminently suited. As much as a critical method is essential to the development of the design process, a historical perspective and an appreciation of the sophistication of communicative media will inform the analysis of structural form and meaning in a modem urban context. Conscious of the dynamic of social and historical influences in design practice, the student is enabled "to take a critical stand against the dogmatism of the school "(Gadamer, 1988) that inevitably insinuates itself in learning institutions and professional practice.
keywords	Design Studio, Communication, Integrated Teaching
series	eCAADe
email
last changed	2022/06/07 07:56

_id	93cc
authors	Colajanni, B., Pellitteri, G. and Concialdi, S.
year	2000
title	Retrieval Tools in Building Case Bases
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 113-116
doi	https://doi.org/10.52842/conf.ecaade.2000.113
summary	Most of the existing aids to building design rely on data base of cases representing solutions to problems that are thought to happen again at least in a similar way. Crucial for the success of the aid is the retrieval engine. In tour its efficiency depends on the way the cases are encoded. Whichever is this way cases will be represented at different levels of abstraction. The highest level will probably consist in an accessibility and adjacency graph. Another level could be a wire plan of the building. An easily workable representation of a graph is a square matrix. For any given building typology it is possible to write a list of encoded space types. This allows forming matrices that can be compared and their diversity measured. Here we present an algorithm that makes this job. Such an algorithm can be one of the case retrieval tools in the data base. It is likely that the designer has already some idea of the shape he wants for the building he is designing. A comparison between some geometric characteristics of the wire representation of the retrieved case and the corresponding ones of the imagined solution of the design problem can constitute a second test. The matching can be done
keywords	Knowledge, Case Bases, Building, Tools
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:56

_id	d0aa
authors	Colajanni, Benedetto, Concialdi, Salvatore and Pellitteri, Giuseppe
year	1999
title	CoCoMa: a Collaborative Constraint Management System for the Collaborative Design
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 364-369
doi	https://doi.org/10.52842/conf.ecaade.1999.364
summary	Collaborative Design is a topic of particular current interest. Existing software allows a multiplicity of designers to work on the same project. What the software really allows is accessing to a part of the information of the project and changing it. Sometimes there is a hierarchical distribution of the power of change: some participants can be permitted to operate only on some limited layers of the object representation. In this case the changes they propose are to be accepted by a general manager of the design process. What is lacking in this kind of software is the explicit management on the reciprocal constraints posed by different participants. In this paper, an elementary Collaborative Design System is presented whose main concern is just the management of constraints. Each participant designs the part of the project of his/her concern instantiating objects comprised of geometric description, alphanumeric variables and constraints on both. Constraints can be of two types: absolute or defined by a range of allowed values of the constrained variable. A participant intervening later can accept the constraint, choosing a value in the permitted range, or decide to violate it. In this case the proposed violation is signalled to whom posed it.
keywords	Collaborative Design, Design Process, Management System, Participant Designs, Constraints Violation
series	eCAADe
email
last changed	2022/06/07 07:56

_id	85ab
authors	Corrao, Rossella and Fulantelli, Giovanni
year	1999
title	Architects in the Information Society: The Role of New Technologies
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 665-671
doi	https://doi.org/10.52842/conf.ecaade.1999.665
summary	New Technologies (NTs) offer us tools with which to deal with the new challenges that a changing society or workplace presents. In particular, new design strategies and approaches are required by the emerging Information Society, and NTs offer effective solutions to the designers in the different stages of their professional life, and in different working situations. In this paper some meaningful scenarios of the use of the NTs in Architecture and Urban Design are introduced; the scenarios have been selected in order to understand how the role of architects in the Information Society is changing, and what new opportunities NTs offer them. It will be underlined how the telematic networks play an essential role in the activation of virtual studios that are able to compete in an increasingly global market; examples will be given of the use of the Web to support activities related to Urban Planning and Management; it will be shown how the Internet may be used to access strategic resources for education and training, and sustain lifelong learning. The aforesaid considerations derive from a Web-Based Instruction system we have developed to support University students in the definition of projects that can concern either single buildings or whole parts of a city. The system can easily be adopted in the other scenarios introduced.
keywords	Architecture, Urban Planning , New Technologies, World Wide Web, Education
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ec4d
authors	Croser, J.
year	2001
title	GDL Object
source	The Architect’s Journal, 14 June 2001, pp. 49-50
summary	It is all too common for technology companies to seek a new route to solving the same problem but for the most part the solutions address the effect and not the cause. The good old-fashioned pencil is the perfect example where inventors have sought to design-out the effect of the inherent brittleness of lead. Traditionally different methods of sharpening were suggested and more recently the propelling pencil has reigned king, the lead being supported by the dispensing sleeve thus reducing the likelihood of breakage. Developers convinced by the Single Building Model approach to design development have each embarked on a difficult journey to create an easy to use feature packed application. Unfortunately it seems that the two are not mutually compatible if we are to believe what we see emanating from Technology giants Autodesk in the guise of Architectural Desktop 3. The effect of their development is a feature rich environment but the cost and in this case the cause is a tool which is far from easy to use. However, this is only a small part of a much bigger problem, Interoperability. You see when one designer develops a model with one tool the information is typically locked in that environment. Of course the geometry can be distributed and shared amongst the team for use with their tools but the properties, or as often misquoted, the intelligence is lost along the way. The effect is the technological version of rubble; the cause is the low quality of data-translation available to us. Fortunately there is one company, which is making rapid advancements on the whole issue of collaboration, and data sharing. An old timer (Graphisoft - famous for ArchiCAD) has just donned a smart new suit, set up a new company called GDL Technology and stepped into the ring to do battle, with a difference. The difference is that GDL Technology does not rely on conquering the competition, quite the opposite in fact their success relies upon the continued success of all the major CAD platforms including AutoCAD, MicroStation and ArchiCAD (of course). GDL Technology have created a standard data format for manufacturers called GDL Objects. Product manufacturers such as Velux are now able to develop product libraries using GDL Objects, which can then be placed in a CAD model, or drawing using almost any CAD tool. The product libraries can be stored on the web or on CD giving easy download access to any building industry professional. These objects are created using scripts which makes them tiny for downloading from the web. Each object contains 3 important types of information: · Parametric scale dependant 2d plan symbols · Full 3d geometric data · Manufacturers information such as material, colour and price Whilst manufacturers are racing to GDL Technologies door to sign up, developers and clients are quick to see the benefit too. Porsche are using GDL Objects to manage their brand identity as they build over 300 new showrooms worldwide. Having defined the building style and interior Porsche, in conjunction with the product suppliers, have produced a CD-ROM with all of the selected building components such as cladding, doors, furniture, and finishes. Designing and detailing the various schemes will therefore be as straightforward as using Lego. To ease the process of accessing, sizing and placing the product libraries GDL Technology have developed a product called GDL Object Explorer, a free-standing application which can be placed on the CD with the product libraries. Furthermore, whilst the Object Explorer gives access to the GDL Objects it also enables the user to save the object in one of many file formats including DWG, DGN, DXF, 3DS and even the IAI's IFC. However, if you are an AutoCAD user there is another tool, which has been designed especially for you, it is called the Object Adapter and it works inside of AutoCAD 14 and 2000. The Object Adapter will dynamically convert all GDL Objects to AutoCAD Blocks during placement, which means that they can be controlled with standard AutoCAD commands. Furthermore, each object can be linked to an online document from the manufacturer web site, which is ideal for more extensive product information. Other tools, which have been developed to make the most of the objects, are the Web Plug-in and SalesCAD. The Plug-in enables objects to be dynamically modified and displayed on web pages and Sales CAD is an easy to learn and use design tool for sales teams to explore, develop and cost designs on a Notebook PC whilst sitting in the architects office. All sales quotations are directly extracted from the model and presented in HTML format as a mixture of product images, product descriptions and tables identifying quantities and costs. With full lifecycle information stored in each GDL Object it is no surprise that GDL Technology see their objects as the future for building design. Indeed they are not alone, the IAI have already said that they are going to explore the possibility of associating GDL Objects with their own data sharing format the IFC. So down to the dirty stuff, money and how much it costs? Well, at the risk of sounding like a market trader in Petticoat Lane, "To you guv? Nuffin". That's right as a user of this technology it will cost you nothing! Not a penny, it is gratis, free. The product manufacturer pays for the license to host their libraries on the web or on CD and even then their costs are small costing from as little as 50p for each CD filled with objects. GDL Technology has come up trumps with their GDL Objects. They have developed a new way to solve old problems. If CAD were a pencil then GDL Objects would be ballistic lead, which would never break or loose its point. A much better alternative to the strategy used by many of their competitors who seek to avoid breaking the pencil by persuading the artist not to press down so hard. If you are still reading and you have not already dropped the magazine and run off to find out if your favorite product supplier has already signed up then I suggest you check out the following web sites www.gdlcentral.com and www.gdltechnology.com. If you do not see them there, pick up the phone and ask them why.
series	journal paper
email
last changed	2003/04/23 15:14

_id	3fd1
authors	Cybis Pereira, A.T., Tissiani, G. and Bocianoski, I.
year	2000
title	Design de Interfaces para Ambientes Virtuais: como Obter Usabilidade em 3D (Interface Design for Virtual Environments: How to obtain use of 3-D space.)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 313-315
summary	The paper presents part of a research developed close to LRV, Laboratory of Virtual Reality of the program of Post-Graduation of the Engineering of production of UFSC. The research aims to answer the approaches for the design of Human-Computer Interfaces, called HCI, for virtual media. Being considered VR the more advanced computer interface technology, at least by the point of view of the interactivity, how come guarantee its usability and at the same time draw graphic interfaces that possess aesthetic and functional value? Besides, in virtual space with or without immersion, how can the design of the interface contribute to stimulate the user’s interactivity with the system in VR? These and other subjects are essential for those who work with interface design for computer systems, and that comes across the need of presenting medias that use virtual reality technology. Through this article a study is presented on the design techniques, the used tools, the recommendations and the necessary requirements of visual communication for HCI for virtual spaces.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	9403
authors	De Carvalho, Silvana Sá
year	2000
title	A Telemática e o Meio Técnico- Científico-Informacional: Um Olhar sobre o Urbano (Telematics and Technical Scientific-Information Environment: An Urban View)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 160-162
summary	The instantaneous nature of globalized information has brought places closer together and homogenized space, eliminating regional differences. Contemporary urban architecture and the technical-scientific- informational quality of the human-made environment innovates the rationality of the dominant actors in society. The field of telecommunications has developed substantially in the last 30 years, and today we are participants in a digital era, that has not only shortened distances but revolutionized the concepts of time and space. Telematics is a fundamental element of cities at the end of the millennium and has become a new instrument of social control. Electronic vigilance systems, as an application of telematics, are now widely used in cities, and a new urban space is being configured based on this dynamic. This paper is an introductory essay on the topic, which is essential in the understanding of urban spatial dynamics, and its objective is to point out fields for future research.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	74ac
authors	De Vries, Bauke
year	2000
title	Sketching in 3D
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 277-280
doi	https://doi.org/10.52842/conf.ecaade.2000.277
summary	Sketching in 3D is a design activity that requires a new approach to user interaction and geometric modeling in an architectural context. DDDoolz is an example of such a system used for mass study and spatial design. This paper describes the basic principles and the students’ experiences in a CAAD course.
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	d11a
authors	Den Hartog, J. P. and Koutamanis, A.
year	2000
title	Teaching design simulation
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 197-200
doi	https://doi.org/10.52842/conf.ecaade.2000.197
summary	The democratization of information and communication technologies (ICT) has promoted integration of computing in the design studio and of design activities in the CAAD courses. In addition it has also shifted the focus of CAAD courses from technical skills and general theoretical issues to current, specific design issues, such as the relationship between geometric modeling and construction, design communication and design analysis. CAAD courses (especially advanced ones) increasingly attempt to introduce these issues and corresponding advanced ICT in a design context that outlines the possibilities of these technologies and the underlying computational design methodology and bring research closer to teaching. One such issue is design analysis, especially in the early design stages when many fundamental decisions are taken on the basis of incomplete and insecure information. Simulation provides the computational means for projecting building behaviour and performance. The paper describes the application of a specific simulation technique, computational fluid dynamics (CFD), for the analysis of airflow in and around buildings in the context of an advanced CAAD course. In this course students are required to design a multifunctional exposition building. Even though students are unfamiliar with the particular CFD system, as well as with part of the simulation subject matter, they are able to produce descriptions of their designs with effectiveness and efficiency.
keywords	Design Analysis, Simulation, CFD, Airflow
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	1ead
authors	Dinand, Munevver Ozgur and Ozersay, Fevzi
year	1999
title	CAAD Education under the Lens of Critical Communication Theories and Critical Pedagogy: Towards a Critical Computer Aided Architectural Design Education (CCAADE)
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 86-93
doi	https://doi.org/10.52842/conf.ecaade.1999.086
summary	Understanding the dominant ethos of our age is imperative but not easy. However it is quite evident that new technologies have altered our times. Every discipline is now forced to be critical in developing new concepts according to the realities of our times. Implementing a critical worldview and consciousness is now more essential than ever. Latest changes in information technology are creating pressure on change both in societal and cultural terms. With its direct relation to these technologies, computer aided architectural design education, is obviously an outstanding / prominent case within contemporary debate. This paper aims to name some critical points related to computer aided architectural design education (CAADE) from the perspective of critical communication studies and critical education theories. It tries to relate these three areas, by introducing their common concepts to each other. In this way, it hopes to open a path for a language of critique. A critique that supports and promotes experimentation, negotiation, creativity, social consciousness and active participation in architectural education in general, and CAADE in specific. It suggests that CAADE might become critical and produce meta-discourses [1 ] in two ways. Firstly, by being critical about the context it exists in, that is to say, its relationships to the existing institutional and social structures and secondly by being critical about the content it handles; in other words by questioning its ideological dimensions. This study considers that analysing the role of CAADE in this scheme can provide architectural education with the opportunity to make healthy projections for the future.
keywords	Critical Theories, Critical Pedagogy, Critical CAADE
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: