Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 748

Reformat results as: short short into frame detailed detailed into frame

_id	9d16
authors	Chan, Chiu-Shui
year	2000
title	A Virtual Reality Tool to Implement City Building Codes on Capitol View Preservation
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 203-209
doi	https://doi.org/10.52842/conf.acadia.2000.203
summary	In urban planning, the urban environment is a very complicated system with many layers of building codes cross-referenced and interacting together to guide urban growth. Especially, if a new urban design is located in a historical area, additional restrictions will be imposed upon regular zoning regulations to maintain the area’s historical characteristics. Often, urban regulations read as text are difficult to understand. A tool that generates adequate urban information and a quick visualization of the design will ease decision-making and enhance urban design processes. The goal of this research project is to develop a virtual reality (VR) tool with high resolution, speedy computation, and a userfriendly environment. This project initiates an interactive visualization tool to enforce city-planning regulations on viewing access to the state capitol building in Des Moines, Iowa. The capitol building houses the Iowa Legislature and is a symbol of state power. Maintaining the view from surrounding areas will preserve the building’s monumental and symbolic meaning. To accomplish this, the City Community Development Department and the Capitol Planning Committee developed a Capitol View Corridor Project, which sets up seven visual corridors to prevent the view toward the capitol from being blocked by any future designs. Because city regulations are not easy for the public and designers to interpret and comprehend, this project intends to develop a VR tool to create a transparent environment for visualizing the city ordinances.
series	ACADIA
last changed	2022/06/07 07:56

_id	bb5f
authors	Ahmad Rafi, M.E. and Mohd Fazidin, J.
year	2001
title	Creating a City Administration System (CAS) using Virtual Reality in an Immersive Collaborative Environment (ICE)
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 449-453
doi	https://doi.org/10.52842/conf.ecaade.2001.449
summary	Current problems in administration of a city are found to be decentralized and noninteractive for an effective city management. This usually will result in inconsistencies of decision-making, inefficient services and slow response to a particular action. City administration often spends more money, time and human resource because of these problems. This research demonstrates our research and development of creating a City Administration System (CAS) to solve the problems stated above. The task of the system is to use information, multimedia and graphical technologies to form a database in which the city administrators can monitor, understand and manage an entire city from a central location. The key technology behind the success of the overall system uses virtual reality and immersive collaborative environment (ICE). This system employs emerging computer based real-time interactive technologies that are expected to ensure effective decisionmaking process, improved communication, and collaboration, error reduction, (Rafi and Karboulonis, 2000) between multi disciplinary users and approaches. This multi perspective approach allows planners, engineers, urban designers, architects, local authorities, environmentalists and general public to search, understand, process and anticipate the impact of a particular situation in the new city. It is hoped that the CAS will benefit city administrators to give them a tool that gives them the ability to understand, plan, and manage the business of running the city.
keywords	City Administration System (CAS), Virtual Reality, Immersive Collaborative Environment (ICE), Database
series	eCAADe
email
last changed	2022/06/07 07:54

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	3f51
authors	Streich, B., Oxman, R. and Fritz, O.
year	2000
title	Computer-Simulated Growth Processes in Urban Planning and Architecture
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 233-237
doi	https://doi.org/10.52842/conf.acadia.2000.233
summary	Urban structures, developed and grown over a period of time, are created by processes that, due to the number of influential factors, are not longer comprehensible as a whole. Their development is very complex and depends on a big number of reciprocal factors that even architects or planners sometimes cannot recognize the formal, functional and rational processes of thinking behind it. The involved mechanisms however are particularly obvious in historical urban structures that came to exist over a period of centuries. The planned relationships within these conglomerates are governed by nearly indiscernible rules and show similarities in form and shape to living and non-living forms in nature. They are clearly analogous to fractals or systems with chaotic behavior. In the course of the research project “media experimental design”, financed by the German Research Foundation, algorithms are sought that are able to simulate urban analogous structures digitally. To this effect the main rules of growth processes are researched and extracted. Then, by following these rules, virtual structures are developed and shown by using powerful three-dimensional techniques. The developed mechanisms allow urban planning to be process-oriented, interactive and flexible for permanently changing parameters. With an implemented set of rules the computer is able to create a design and to react to changing situations. In several experimental studies structures were successfully generated which have different forms and qualities depending on their set of rules. For example, structures were programmed which are similar to a big city while other look like a village in hilly landscape. Diverse rules and strategies have been used in order to reduce them to shape specific factors. The rules for growth are administered by a specifically developed databank with sophisticated search mechanisms using the Issue-Concept- Form tool as case-based-reasoning method.
keywords	Simulation, Urban Growth-Processes, Virtual Reality
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ddssar0027
id	ddssar0027
authors	Tüzmen, AyVa
year	2000
title	Process management for collaborative building design
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	Collaborative building design relies on people working coordinately to accomplish the requirements of a design project. Coordination is achieved by well organized, informed and communicating design teams. However, not all design teams in current design practice are well organized and well informed about where the project stands. This paper introduces a process management system that facilitates the management of the enactment of a collaborative design process. At the highest level, the process management system enables (a) the design teams to describe the design process that will be enacted by the team, (b) the enactment of the design process according to its process definition, (c) the management of the resources required for the enactment of the process. The paper also presents the findings of a validation and verification (V&V) study that is conducted to evaluate the effectiveness of the proposed system in the establishment of a collaborative design environment.
series	DDSS
last changed	2003/08/07 16:36

_id	c51f
authors	Voigt, A., Walchhofer, H.P. and Linzer, H.
year	2000
title	City Experimental Lab
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 143-146
summary	The present contribution deals with the required scale of performances regarding an adequate simulation environment for recent and future challenges of urban development planning based on the concept “City Experimental Lab, CEL”. This paper issues concrete project experience covering the capital city of Upper Austria, Linz. Such CEL could and should act as an “expert system” in the preliminary stages of decision-finding, making available all particulars regarding decisions to the politicians, the planning administration, outside advisors and particularly to the citizens concerned in the suited present-day manner. It could be used for work sessions of planning- or design councils, expert hearings, for the continuous information of citizens on present planning work at the various degrees of concreteness and commitment, etc.. Thus those possibilities are to be enhanced which turn the present city configuration into a virtual experience by integrating visions, utopias and the future developments.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	3a3d
authors	Coors, Volker
year	2002
title	Resource-Adaptive 3D Maps for Location Based Services
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.29-I.38
summary	In this paper, we present a database driven approach for managing and visualizing 3D urban city models and related multimedia content. Such a 3D database is a core component of a 3D Cadastre system (Coors 2002a). In the TellMaris project (IST 2000- 28249, www.tellmaris.com), we will make use of the 3D database to generate 3D maps. The objective of TellMaris is the development of a generic 3D-map interface to tourist information on mobile computers. The interface provides a new concept for creating value added information services on mobile computers for the European citizens related to geographical information. The interface is in the project used for accessing tourist information relevant for boat tourism in the Baltic Sea and Aegean Sea area in the Mediterranean. In this paper we focus on the online generation and compression of 3D-maps in order to make use of these maps in a mobile enviroment.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/03/29 10:42

_id	1bf8
authors	Martens, B., Uhl, M., Tschuppik, W.-M. and Voigt, A.
year	2000
title	Synagogue Neudeggergasse: A Virtual Reconstruction in Vienna
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 213-218
doi	https://doi.org/10.52842/conf.acadia.2000.213
summary	Issues associated with virtual reconstruction are first dealt within this paper. Visualizing of no longer existent (architecture-) objects and their surroundings practically amounts to a “virtual comeback”. Furthermore, special attention is given to the description of the working procedure for a case study of reconstruction sounding out the potentials of QuickTime VR. The paper ends up with a set of conclusions, taking a close look at the “pros” and “cons” of this type of re-construction. 1 Introduction Irreversible destruction having removed identity-establishing buildings from the urban surface for all times is the principal cause for the attempt of renewed “imaginating.” When dealing with such reconstruction first the problem of reliability concerning the existing basic material has to be tackled. Due to their two-dimensional recording photographs only supply us with restricted information content of the object under consideration. Thus the missing part has to be supplemented or substituted by additional sources. Within the process of assembling and overlaying of differing data sets the way of dealing with such fragmentations becomes of major importance. Priority is given to the choice of information. One of the most elementary items of information regarding perception of three-dimensional objects surely is the effect that color and material furnishes. It seems to suggest itself that black-and-white shots hardly will prove valid in this respect. The three-dimensional object doubtlessly provides us with a by far greater variety of possibilities in the following working process than the “cardboard model with pasted-on facade photography”. Only the completely designed model structure makes for visualizing the plastic representation form of architecture in a sustainable manner. Furthermore, a virtual model can be dismantled into part models without amounting to a destruction process thereof. Apart therefrom the virtual model permits the generation of differing reconstruction variants regarding color and material. Moreover, architecture models of a physical nature are inherently connected to locality as such.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	ecaade2023_205
id	ecaade2023_205
authors	Meeran, Ahmed and Joyce, Sam
year	2023
title	Rethinking Airport Spatial Analysis and Design: A GAN based data driven approach using latent space exploration on aerial imagery for adaptive airport planning
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 501–510
doi	https://doi.org/10.52842/conf.ecaade.2023.2.501
summary	Airports require long term planning, balancing estimations of future demand against available airfield land and site constraints. This is becoming more critical with climate change and the transition to sustainable aviation fuelling infrastructure. This paper demonstrates a novel procedure using Satellite Imagery and Generative Learning to aid in the comparative analysis and early-stage airfield design. Our workflow uses a GAN trained on 2000 images of airports transforming them into a high-dimensional latent space capturing the typologies’ large-scale features. Using a process of projection and dimensional-reduction methods we can locate real-world airport images in the generative latent space and vice-versa. With this capability we can perform comparative “neighbour” analysis at scale based on spatial similarity of features like airfield configuration, and surrounding context. Using this low-dimensional 3D ‘airport designs space’ with meaningful markers provided by existing airports allows for ‘what if’ modelling, such as visualizing an airport on a site without one, modifying an existing airport towards another target airport, or exploring changes in terrain, such as due to climate change or urban development. We present this method a new way to undertake case study, site identification and analysis, as well as undertake speculative design powered by typology informed ML generation, which can be applied to any typologies which could use aerial images to categorize them.
keywords	Airport Development, Machine Learning, GAN, High Dimensional Analysis, Parametric Space Exploration, tSNE, Latent Space Exploration, Data Driven Planning
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ddssar0001
id	ddssar0001
authors	Achten, Henri and Leeuwen, Jos van
year	2000
title	Towards generic representations of designs formalised as features
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	Feature-Based Modelling (FBM) is an information modelling technique that allows the formalisation of design concepts and using these formal definitions in design modelling. The dynamic nature of design and design information calls for a specialised approach to FBM that takes into account flexibility and extensibility of Feature Models of designs. Research work in Eindhoven has led to a FBM framework and implementation that can be used to support design.. Feature models of a design process has demonstrated the feasibility of using this information modelling technique. To develop the work on FBM in design, three tracks are initiated: Feature model descriptions of design processes, automated generic representation recognition in graphic representations, and Feature models of generic representations. The paper shows the status of the work in the first two tracks, and present the results of the research work.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssar0002
id	ddssar0002
authors	Aoki, Yoshitsugu and Inage, Makoto
year	2000
title	Linguistic Operation System for Design of Architectural Form
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	In a process of architectural design, an architect not only draws by himself/herself but also lets another person modify a design by given a linguistic instruction expressing how the design ought to be. In the case of utilization of CAD systems, it is useful if the system modifies the design according to the linguistic instruction. On the other hand, because of the recent increase of the opportunities of designing a building whose roof has complicated curved surface, it extremely takes labor to change the design. This paper proposes a linguistic operation system that modifies a design according to the linguistic instruction of the modification by the user to support design of a complicated form with curved surface. The proposed system is expected to be integrated with a CAD system. First, the system presents a perspective sketch of a designed form. From the values of the design variables that characterize the form in the system, the system calculates the position of the form in “the association image space.” Second, the designer puts a linguistic instruction i.e., words as like as “let it be more light” to modify the form. The words used for the instruction have the position in the association image space. In the association image space, the system moves the position of the form to a new position that gets to be near the position of the given word. The system calculates the values of the design variables of the form corresponding to the new position. We need a mapping from every vector representing the position of the changed form in the association image space to the corresponding vector representing the values of the design variables. To find the mapping, we construct a neural network system with three levels. Finally, the system presents a perspective sketch of changed form using the calculated values of design variables.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssar0004
id	ddssar0004
authors	Bignon, J.-C., Halin, G. and Nakapan, W.
year	2000
title	Building product information search by images
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	Building product information is required during the architectural design and technical design. The common access to the technical information system is the multi-criteria search mode. This search mode is adapted to the situation where an architect has a precise demand of information. But most of the time, the architect looks for ideas and wants to obtain many illustrations of product uses. Therefore, the system has to propose another search mode adapted to the situation where the demand is still fuzzy. Considering that the architect has the capacity to think with image and that an image can generate easily ideas, then a search by images seems to be suitable to the situation where an architect looks for ideas. The web is an inexhaustible resource of images we can exploit to provision an image database on a specific area. The system we propose allows making building product information search with images extracted from the web. This article presents the method used to extract images from web sites of French building product companies and how these images are used in an interactive and progressive image retrieval process.
series	DDSS
last changed	2003/11/21 15:16

_id	f288
authors	Bille, Pia
year	1999
title	Integrating GIS and Electronic Networks In Urban Design and Planning
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 722-728
doi	https://doi.org/10.52842/conf.ecaade.1999.722
summary	In 1998 I undertook an inquiry into the use of information technology in Urban Design and Planning in Danish municipalities and among planning consultants. The aim was to find out who was working with the IT and for what purposes it was used. In education there seems to be barriers to a full integration of the new media, and I wanted to find out if that was also the case in the practise of architects and planners. Surprisingly I discovered that there was a computer on almost every desk, - but there were big differences in the use of the technology. The investigation described here is based on interviews with planners in selected municipalities and with urban planning consultants, and the results have been summarised in a publication.
keywords	Urban Planning, Electronic Collaboration, GIS, Data Bases
series	eCAADe
email
last changed	2022/06/07 07:54

_id	30f5
authors	Chan, Chen-Wei and Chiu, Mao-Lin
year	2000
title	A Simulation Study of Urban Growth Patterns with Fractal Geometry
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 55-64
doi	https://doi.org/10.52842/conf.caadria.2000.055
summary	This paper depicts the use of fractal geometry in urban simulation. Fractal geometry, L-system, the DLA model, and related urban growth theories are first examined. Then an urban simulation system based on fractal geometry and L-system, Fractal_US, is built on the web for studying urban development patterns in various conditions. The Taipei city is simulated to demonstrate the visualization of urban growth and the result is presented for further discussion.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ddssar0005
id	ddssar0005
authors	Cheng, Nancy Yen-wen and Kvan, Thomas
year	2000
title	Design collaboration strategies
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	How can we best use computer technology to facilitate remote design teamwork? From looking at virtual studio collaborations, we propose that multiple solutions exist rather than a single one. In examining both published results and own student projects, we identify the following factors to be considered in finding the best fit between technology and group design: 1) Collaborators’ profiles; 2) Mutual value of produced information; 3) Collaboration structure and 4) Logistical opportunities
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar0006
id	ddssar0006
authors	Ciftcioglu, Ö., Durmisevic, S. and Sariyildiz, S.
year	2000
title	Multi-objective design for space layout topology
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	A novel method to produce space layout topologies for architectural design is described. From the uniformly distributed design solutions in the solution space the corresponding design requirements are computed according to a given norm and metric function. The system is based on graph representation of the layout so that the desired relations between the pairs of nodes are considered to be independent variables of appropriate series of multivariable functions mapping the requirements into the solution space. The system so established is used as a knowledge-base for robust layout design where knowledge base having been established, the layout design requirements are introduced to the system as design constraints and the output is identified in the multidimensional solution space by means of interpolation. Since the smoothness of the interpolation is guaranteed, robust design layout, in the form of node locations, is obtained.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar0007
id	ddssar0007
authors	Cooper, G., Rezqui, Y., Jackson, M., Lawson, B., Peng, C. and Cerulli, C.
year	2000
title	A CAD-based decision support system for the design stage of a construction project
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	Decisions made during the design process are multi-dimensional, combining together factors which range from the highly subjective to the perfectly objective. These decisions are made by many, often non co-located, actors belonging to different disciplines. Moreover, there is a high risk for misunderstandings, inappropriate changes, and decisions, which are not notified to all interested parties. The ADS project (Advanced Decision Support for Construction Design) builds on the results of the earlier COMMIT project to provide an information management system, which addresses these problems. It defines mechanisms to handle the proactive management of information to support decision-making in collaborative projects. Different aspects of the COMMIT system have already been widely published, and the team is now applying the results in the context of construction design. These are referenced in the present paper, which gives an overview of the results of the COMMIT project and discusses some of the issue involved in applying them to the design process in conjunction with an advanced CAD tool.
series	DDSS
last changed	2003/08/07 16:36

_id	98e7
authors	Coppola, Carlo
year	1999
title	Computers and Creativity in Architecture
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 595-602
doi	https://doi.org/10.52842/conf.ecaade.1999.595
summary	The main purpose of this teaching and research project is to define those principles capable of determining a possible approach to computer-aided design for architecture - not seen as as a mere tool but as a way of supporting decision-making.
keywords	Decision-making, Expert Systems, Urban Development, Building Types
series	eCAADe
email
last changed	2022/06/07 07:56

_id	958e
authors	Coppola, Carlo and Ceso, Alessandro
year	2000
title	Computer Aided Design and Artificial Intelligence in Urban and Architectural Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 301-307
doi	https://doi.org/10.52842/conf.ecaade.2000.301
summary	In general, computer-aided design is still limited to a rather elementary use of the medium, as it is mainly used for the representation/simulation of a design idea w an electronic drawing-table. hich is not computer-generated. The procedures used to date have been basically been those of an electronic drawing-table. At the first stage of development the objective was to find a different and better means of communication, to give form to an idea so as to show its quality. The procedures used were 2D design and 3D simulation models, usually used when the design was already defined. The second stage is when solid 3D modelling is used to define the formal design at the conception stage, using virtual models instead of study models in wood, plastic, etc. At the same time in other connected fields the objective is to evaluate the feasibility of the formal idea by means of structural and technological analysis. The third stage, in my opinion, should aim to develop procedures capable of contributing to both the generation of the formal idea and the simultaneous study of technical feasibility by means of a decision-making support system aided by an Artificial Intelligence procedure which will lead to what I would describe as the definition of the design in its totality. The approach to architectural and urban design has been strongly influenced by the first two stages, though these have developed independently and with very specific objectives. It is my belief that architectural design is now increasingly the result of a structured and complex process, not a simple act of pure artistic invention. Consequently, I feel that the way forward is a procedure able to virtually represent all the features of the object designed, not only in its definitive configuration but also and more importantly in the interactions which determine the design process as it develops. Thus A.I. becomes the means of synthesis for models which are hierarchically subordinated which together determine the design object in its developmental process, supporting decision-making by applying processing criteria which generative modelling has already identified. This trend is currently being experimented, giving rise to interesting results from process design in the field of industrial production.
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:56

For more results click below: