Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 716

Reformat results as: short short into frame detailed detailed into frame

_id	5bcd
authors	Rügemer, Jörg
year	2001
title	Computer Generated Architectural Design: 160 custom-made Architectural data flow from schematic design into Computer Aided Manufacturing
doi	https://doi.org/10.52842/conf.ecaade.2001.288
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 288-292
summary	The paper constitutes the introduction of a new approach into architectural design methods at the Institute for Architectural Design and CAD. It describes the experience with regard to the learning process and explains the design studio experiment ‘160 custom-made’. The design method has been developed from different actual building procedures. ‘160 custom-made’ provokes the contradiction between a modernistic architectural approach (industrialized parts and series manufacturing) and computer based design and manufacturing processes which promise the realization of almost every imaginable architectural shape at no extra cost. The students visited several Companies in Germany, Switzerland and Austria, who demonstrated state-of-the-art-technology-manufacturing methods on various materials. This Computer Aided Manufacturing (CAM) process then became the basis for discovering a new way to speculate about solutions to a design problem. The project was described into computer aided modeling starting early in the design. In the beginning participants were asked to design an object using terms, images and ideas, entirely detached from architectural thinking and without the knowledge of the actual architectural goal. ‘Maya’, a three-dimensional modeling software, was introduced at the same time, which allowed participants to translate the analog data of their models into a digital model description. In the last project phase this knowledge was used to visualize the models with the computer; a programmatic task was added to the design as the students proceeded with the further development stages of the project. The group searched for ways to translate the produced data structures and to drive the Computer Aided Manufacturing (CAM) process. The easy building of quick models with this technology proved to be more difficult than expected. ‘160 custom-made’ participants were confronted with an entirely new method of designing due to the unusual procedures needed to handle digital data information in order to receive the desired output.
keywords	Computer Aided Manufacturing, Rapid Prototyping, Design Education, Digital Design Development, Data Structures
series	eCAADe
email
last changed	2022/06/07 07:56

_id	f95f
authors	Angulo, A.H., Davidson, R.J. and Vásquez de Velasco, G.P.
year	2001
title	Digital Visualization in the Teaching of Cognitive Visualization
doi	https://doi.org/10.52842/conf.acadia.2001.292
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 292-301
summary	Professional design offices claim that our graduates have difficulties with their free-hand perspective drawing skills. This fact, which has become obvious over the last 5 years, is parallel to a clear tendency towards the use of 3-dimensional digital imagery in the projects of our students. Frequently, faculty tends to blame the computer for the shortcomings of our students in the use of traditional media, yet there is no clear evidence on the source of the blame. At a more fundamental level, the visualization skills of our students are questioned. This paper will explain how faculty teaching design communication techniques, with traditional and digital media, are working together in the development of a teaching methodology that makes use of computers in support of our student’s training on cognitive visualization skills, namely; “The Third-Eye Method”. The paper describes the Third-Eye Method as an alternative to traditional methods. As evidence of the benefits offered by the Third-Eye Method, the paper presents the results of testing it against traditional methods among freshman students. At the end, the paper draws as conclusion that computers are not the main source of the problem but a potential solution.
keywords	Pedagogy, Visualization, Media
series	ACADIA
email
last changed	2022/06/07 07:54

_id	avocaad_2001_06
id	avocaad_2001_06
authors	Giovanni De Paoli
year	2001
title	Architectural design and procedural models - A radical change of language to design in architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The history of architecture and its teaching clearly reveal how representations of the image and drawing have changed over centuries. Today, computers are increasingly found at the desks of architecture professionals and students, but their usage remains restricted to technical functions and what is commonly known as CAD (computer-assisted design), in architecture is often simply the other CAD (computer-assisted drawing).This presentation deals with architectural design, particularly at its earliest stage. Our objective is to propose a model for describing the architectural concept that meets the needs of architects through software. Only then will they really be able to use computers as an aid to design by overcoming the obstacles that presently keep us from making full use of them.This has led me to propose an avenue of exploration that examines projection through an object’s properties, and a method of computer-assisted design that makes use of procedural models. These procedural models consist of geometric operators and operators that define the properties, characteristics and performance of a building — operators which I have termed “semantic”.This research fits into a paradigm that leads to representation of the building through functions that can be called with parameters and encapsuled in an algorithm, making it possible to create procedural models that assist with the design. This approach opens up a means of integrating the logos with the figurative representation where drawing is used instead of words to convey the architectural concept.The example of a procedural model shows how we can use a generic model to produce a volume model with all the characteristics belonging to the same family of objects. This type of model can serve not only to illustrate the result of a process, or to draw connections among buildings on the basis of their construction process, or to test the validity of a rule typical of a set of objects, but also to integrate, through a functional language, semantic operators which to date have been excluded from the initial design phase. This descriptive mechanism is extremely powerful in making it possible to establish relationships among the functions and properties of a building and the purpose of the architectural project.The scientific contribution of this research is to test the hypothesis that we can use computer tools to manipulate operators which enable the architect to reappropriate a complex design of the building, and open up new lines of investigation into integrating geometric and knowledge-based systems into a unified representation. The declarative approach for creating three-dimensional scenes fits into this perspective.It is now a matter of exploring the possibility of working on a “common morphology” shared by everyone involved in the design process by rewriting the functions or by converting the functions used for representation, or else through a functional dialect (language) that allows for dialectic relationships among all types of operators and the actions of the protagonists in the architectural design process.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	3322
authors	Klinger, Kevin R.
year	2001
title	Making Digital Architecture: Historical, Formal, and Structural Implications of Computer Controlled Fabrication and Expressive Form
doi	https://doi.org/10.52842/conf.ecaade.2001.239
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 239-244
summary	Digital output from computer modeling represents a significant new method for visualization and fabrication of architecture. The ability to move directly from three-dimensional modeling to real three-dimensional output challenges the need for traditional means of representation such as plan, section, etc. Moreover, the necessity for conversion of architectural intentions into a code (construction documents, shop drawings, etc.) to be translated by the contractor will also be tested with these new potentials in fabrication. This subjugation of traditional forms of representation and fabrication has serious implications for architectural design process and production. The intention of this paper is to scrutinize underlying issues inherent in a design process of developing architectural solutions using the computer both as a tool for threedimensional visualization as well as for guiding three-dimensional fabrication. Precedent of historic expressive architectural form (seen through the lens of fabrication) will be presented to lay the foundation for the examination of new fabrication techniques and structural concerns for computer generated expressive forms. A series of rapid prototype studies from a digital architecture seminar will also be analyzed to outline the need for developing visualization/fabrication process ideas and research into methods for making digital architecture.
keywords	Expressive Form, Digital Visualization, Digital Fabrication, Rapid Prototyping, Five-Axis Milling
series	eCAADe
email
last changed	2022/06/07 07:51

_id	737e
authors	Riegler, A. (ed.)
year	2001
title	Virtual Science: Virtuality and Knowledge Acquisition in Science and Cognition
source	Virtual Reality: Cognitive Foundations, Technological Issues & Philosophical Implications. Frankfurt am Main: Peter Lang
summary	The focus of this paper is the process of knowledge acquisition (KA) and which role virtuality plays in this context. We argue that there are three different modes of knowledge acquisition which can be identified both in the domains of cognition and science: the empirical, the "constructive", and the "synthetic" mode. We show that the method of constructing knowledge in the virtual domain (i.e., the synthetic mode of KA) is not only a principal mode of KA in our cognition (e.g., thought experiments, making plans, etc.). It becomes increasingly important in the field of (natural) science in the form of simulations and virtual experiments. The attempt to find an answer to the question of whether simulation can be an information source for science, and to validate the computational approach in science, leads to a new interpretation of the nature of virtual models. This new perspective renders the problem of "feature extraction" obsolete.
series	other
last changed	2003/04/23 15:50

_id	5166
authors	Sass, Larry
year	2001
title	Reconstructing Palladio’s Villas: A computational analysis of Palladio’s villa design and construction process
doi	https://doi.org/10.52842/conf.acadia.2001.212
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 212-226
summary	This project is ongoing research focused on finding a method of reconstruction, using computational devices to build, represent and evaluate Palladio’s un-built villas in three-dimensions. The first of The Four Books of Architecture contains text and images explaining Palladio’s design and construction systems in the form of rules. These rules were written for masons and craftsmen of the 16th century, offering one and two-dimensional data on each of Palladio’s villas, palaces and churches. The Four Books offers a general treatment of the villas; however, it is missing most of the physical construction data needed to execute a full reconstruction of an un-built building. Many architects and historians have attempted to reconstruct Palladio’s work in drawings, wooden models and computer imagery. This project presents a new method of reconstruction through the definition of construction rules, in addition to shape and proportional rules defined by previous scholars. In also uses 3D printing and texture mapped renderings as design tools. This study uses the Villa Trissino in Meledo as a test case for the process. The end product is a presentation of a method for reconstruction in the form of a three-dimensional analysis of Palladio’s design and construction rules. The goal is to recreate all 24 of the villas found in the Four Books with the same method and rules as a demonstration of qualitative and quantitative input and output from a computational device.
keywords	Palladio, Computer Modeling, 3D Printing, Computer Rendering
series	ACADIA
email
last changed	2022/06/07 07:57

_id	1d5a
authors	Schnabel, M.A., Kvan, T., Kruijff, E. and Donath, D.
year	2001
title	The First Virtual Environment Design Studio
doi	https://doi.org/10.52842/conf.ecaade.2001.394
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 394-400
summary	Since 1993 schools of architecture all over the world conduct in various forms of Virtual Design Studio (VDS). They have become an established part of teaching design within the digital realm. They vary in task and structure, are purely text-based or include various forms of interactive, synchronous or asynchronous collaboration. However, ‘virtual’ always refers to the method of communication and exchange of design and ideas. Students have never designed within immersive virtuality. This paper describes the first successful attempt to conduct a Joint Design Studio, which uses Virtual Environment (VE) as tool of design and communication between the remote partners. This first VeDS focused on how architectural students make use of this particular different approach to design within immersive three-dimensional VEs. For example, the students created 3D-immersive design proposals, explored dependencies to textual description of initial intentions and communicated between local and remote team-partners in immersive VE as well as textbased communication-channels. The paper subsequently describes the VeDS, its set-up, realization and outcome. We discuss frameworks and factors influencing how architectural students communicate their proposals in immersive VeDS, and how this new approach of design studio enables new forms of design expressions.
keywords	Immersive Virtual Reality, Collaborative Design, Joint Design Studio, Preliminary Design
series	eCAADe
email
last changed	2022/06/07 07:57

_id	705c
authors	Schnabel, Marc Aurel and Kvan, Thomas
year	2001
title	Implementing The First Virtual Environment Design Studio
source	Architectural Education for the Asian Century, Proceedings of the 1st ACAE Conference on Architectural Education, Milton Tan, editor, Centre for Advanced Studies in Architecture, National University of Singapore, pp. 157-166
summary	Since 1993 schools of architecture all over the world conduct in various forms of Virtual Design Studio (VDS). They have become an established part of teaching design within the digital realm. They vary in task and structure; are purely text-based or include various forms of interactive; synchronous or asynchronous collaboration. However; ‘virtual’ always refers to the method of communication and exchange of design and ideas. Students have never designed within immersive virtuality. This paper describes the first successful attempt to conduct a Joint Design Studio; which uses Virtual Environment (VE) as tool of design and communication between the remote partners. This first VeDS focused on how architectural students make use of this particular different approach to design within immersive three-dimensional VEs. For example; the students created 3D-immersive design proposals; explored dependencies to textual description of initial intentions and communicated between local and remote team-partners in immersive VE as well as text-based communication-channels. The paper subsequently describes the VeDS; its set-up; realization and outcome. We discuss frameworks and factors influencing how architectural students communicate their proposals in immersive VeDS; and how this new approach of design studio enables new forms of design expressions.
keywords	Virtual Environment; Remote Collaboration; Design Evaluation; Spatial Understanding
series	other
email
last changed	2002/11/15 18:29

_id	avocaad_2001_18
id	avocaad_2001_18
authors	Aleksander Asanowicz
year	2001
title	The End of Methodology - Towards New Integration
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The present paper is devoted to the deliberation on the genesis and development of designing from the point of view of the potential use of computers in the process. Moreover, it also presents the great hopes which were connected with the use of the systematic designing methods in the 1960’s, as well as the great disappointment resulting from the lack of concrete results. At this time a great deal of attention was paid to the process of design as a branch of a wider process of problem-solving. Many people believed that the intuitive methods of design traditionally used by architects were incapable of dealing with the complexity of the problems to be solved. Therefore, the basic problem was the definition of a vertical structure of the designing process, which would make it possible to optimise each process of architectural design. The studies of design methodology directed at the codification of the norms of actions have not brought about any solutions which could be commonly accepted, as the efforts to present the designing process as a formally logical one and one that is not internally “uncontrary” from the mathematical point of view, were doomed to fail. Moreover, the difficulties connected with the use of the computer in designing were caused by the lack of a graphic interface, which is so very characteristic of an architect’s workshop. In result, the methodology ceased to be the main area of the architect’s interest and efforts were focused on facilitating the method of the designer’s communication with the computer. New tools were created, which enabled both the automatic generation of diversity and the creation of forms on the basis of genetic algorithms, as well as the presentation of the obtained results in the form of rendering, animation and VRML. This was the end of the general methodology of designing and the beginning of a number of methods solving the partial problems of computer-supported design. The present situation can be described with the words of Ian Stewart as a “chaotic run in all directions”. An immediate need for new integration is felt. Cyber-real space could be a solution to the problem. C-R-S is not a virtual reality understood as an unreal world. Whilst VR could be indeed treated as a sort of an illusion, C-R-S is a much more realistic being, defining the area in which the creative activities are taking place. The architect gains the possibility of having a direct contact with the form he or she is creating. Direct design enables one to creatively use the computer technology in the designing process. The intelligent system of recognising speech, integrated with the system of virtual reality, will allow to create an environment for the designer – computer communication which will be most natural to the person. The elimination of this obstacle will facilitate the integration of the new methods into one designing environment. The theoretical assumptions of such an environment are described in the present paper.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	174f
authors	Bakker, N.H.
year	2001
title	Spatial Orientation in Virtual Environments
source	Delft University of Technology
summary	Recently, a growing interest can be detected in the application of Virtual Environment (VE) technology as an operator interface. VEs are three-dimensional computer-generated images that can be shown on a conventional monitor, on a large screen display, or on a head-mounted display. In order to use these three-dimensional interfaces for finding and retrieving information, the user must be able to spatially orient themselves.Different types of VE technology are available for navigating in these VEs, and different types of navigation can be enabled. A choice has to be made between the different options to enable good spatial orientation of the user. There are two main types of VE interfaces: an immersive interface that provides rich sensory feedback to the user when moving around in the VE, and a non-immersive interface that provides only visual feedback to the user when moving around in the VE. Furthermore, navigation through the VE can either be continuous providing fluent motion, or can be discontinuous which means that the viewpoint is displaced instantaneously over a large distance.To provide insight into the possible effects of these options a series of nine experiments was carried out. In the experiments the quality of spatial orientation behaviour of test subjects is measured while using the different types of interface and the different types of navigation.The results of the experiments indicate that immersive navigation improves the perception of displacement through the VE, which in turn aids the acquisition of spatial knowledge. However, as soon as the spatial layout of the VE is learned the two types of navigation interface do not lead to differences in spatial orientation performance. A discontinuous displacement leads to temporary disorientation, which will hinder the acquisition of spatial knowledge. The type of discontinuous displacements has an effect on the time needed for anticipation. The disorienting effects of a discontinuous displacement can be compensated for by enabling cognitive anticipation to the destination of the displacement.These results suggest that immersive navigation might only be beneficial for application domains in which new spatial layouts have to be learned every time or in domains where the primary users are novices. For instance, in training firemen to teach them the layout of new buildings with VE, or in using architectural walkthroughs in VE to show new building designs to potential buyers. Discontinuous movement should not be allowed when exploring a new environment. Once the environment is learned and if fast displacement is essential then discontinuous displacement should be preferred. In this case, the interface designer must make sure that information is provided about the destination of a discontinuous displacement.
series	thesis:PhD
last changed	2003/11/21 15:16

_id	5cf4
id	5cf4
authors	Barrionuevo, Luis F.
year	2004
title	LOS "SPIROSPACES"
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 179-187.
summary	This paper deals with “Spirospaces”. These are a conversion to the third dimension of the two dimensional geometric entities called “Spirolaterals”. Abelson, Harold, diSessa and Andera (1968) gave the first rules concerning Spirolaterals. To obtain a Spirolateral from a set of straight lines, the first of them must be one unit long and the following must be incremented one unit at each step, at the same time that they turn in a constant direction. Odds (1973) establish the variation of the rotation direction, either to the left or the right. However, he did not give a mathematical relation able to calculate open Spirolaterals. Krawczyk (2001) developed a computer program that generates Spirolaterals following the method suggested by Abelson. These are Spirolaterals obtained by enumeration without a predictive mathematical formula. Krawczyc went farther proposing Spirolaterals based in curved lines. He pointed out that there are a variety of spirolateral forms that have architectural potentiality. Following this, the architectural potentiality of Spirolaterals is the basis of this paper. To take advantage of that potentiality a computer program was implemented to generate spatial configurations based in Spirolaterals. When a third dimension is given to the Spirolaterals they become Spirospaces. These new entities need spatial and design parameters to be useful for architectural purposes. Barrionuevo and Borsetti (2001) gave results about that work establishing the concept of Spirospaces. The aim of this paper is to describe a work directed to improve rules and procedures concerning Spirospaces. It is expected that these procedures governed by the proposed rules can be employed as tools during the early steps in the architectural design process. In this work some aspects concerning Spirospaces are considered. First, Spirolaterals are presented as the predecessors of Spirospaces. Second, Spirospaces are defined, together with their structural parameters. Architectural modeling is studied at the light of two special elements of the Spirospaces: Interstitial spaces and Object spaces. Next, a computer program is presented as the appropriate tool to model configurations having architectural potentiality. Finally, the results obtained running the computer program are analyzed to determine their possible use as architectural forms. Several graphic illustrations are presented showing steps going from the exploration of spatial alternatives to the selection of a specific configuration to be developed. It is expected that the described computer program could be employed as a design aid tool. As the operation of the program generates a variety of spaces able to dwell architectural objects, it eases the search of configurations suitable to specific functions. The results obtained have the possibility of being exported to computer graphic applications able to add materials, lights and cameras.
keywords	Spirolaterals, Spirospaces, architectural spaces, interstitial spaces, objectual spaces
series	other
type	normal paper
email
last changed	2005/04/07 15:34

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	2178
authors	Chevrier, C. and Perrin, J.P.
year	2001
title	Interactive 3D reconstruction for urban areas. An image based tool
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 753-765
summary	Urban applications (for example arrangement, new buildings, virtual sightseeing and walkthrough) require a three dimensional (3D) geometrical model of town areas. However, most of them do not need an accurate model of reality. Such model would occupy a considerable memory space and would be too slow to handle. Architects, urban designers and civil engineers can find in our tool a medium to conceive their projects. Some types of software exist but they do not correspond exactly to our needs. Consequently we have conceived and developed an interactive tool for virtual 3D rough reconstruction of buildings. The software development has been performed in the Maya environment (ALIAS Wavefront) with C++ language and MEL (Maya Embedded Language). A constraint we set for ourselves was the use of only light devices (for easy transportation) at low price (everybody can buy such devices). The principle is to overlay on the scanned photograph of the area we want to deal with, the two dimensional (2D) cadastral plan displayed from the same viewpoint as the picture. Then each building body can be extruded from its ground polygon and the roof can be created from what the user sees on the picture. A constraint is the flatness of the polygonal surfaces. Our application context was the town of Nancy in France for which some areas have been reconstructed. Some pictures have been used as textures for polygonal surfaces, giving more reality effect to the simulation.
keywords	Geometrical Modelling, Architecture, Urban Area, Virtual Visit
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	ga0123
id	ga0123
authors	Coates P., Appels, T. Simon, C. and Derix, C.
year	2001
title	Current work at CECA
source	International Conference on Generative Art
summary	The centre for environment computing and architecture continues to experiment with new ways to form, and this paper presents three recent projects from the MSc programme. The three projects all share underlying assumptions about the use of generative algorithms to constructform, using fractal decomposition, lindenmayer systems and the marching cubes algorithm respectively to construct three dimensional "architectural" objects. The data needed to drive the morphology however ranges from formal proportional systems and Genetic L systems programming through swarming systems to perceptive self organising neural nets. In all cases, the projects pose the question what is architectural form. While after Stanford Anderson (Anderson 66) we know it is simplistic to say that it is an automatic outcome of a proper definition of the brief, it is also difficult to accept that the form of a building is an entirely abstract geometrical object existing without recourse to social or contextual justification. In anattempt to resolve these issues we have turned to the study of systems and general system theory as a way of understanding the mechanics of emergence and morphogenesis generally, and the
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	24d2
authors	Da Costa Silva, Heitor
year	2001
title	MODELOS: FORMA E CONFORTO NA ARQUITETURA (Models: Form and Environment in Architecture)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 51-53
summary	The work presents a research project in its first phase of implementation. The research project deals with the manufacturing of architectural models which use new technology, for thermal and lighting investigation and using one heliodon as means of building assessment. The models to be produced will be chosen from built examples of the Modern Architecture of the XX Century. Initially virtual models will be constructed and afterwards the models will be printed in 3D. Once the three dimensional models were built they will be examined in one heliodon to evaluate their thermal and light performance. Also the models will be used as means of calibrating the heliodon itself. Lately the models will be incorporate as building examples for projects museum.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	1229
authors	Donath, D., Beetz, N., Grether, K., Kruijff, E., Petzold, F. and Seichter, H.
year	2001
title	Cooling Factory, a concrete project to test new architectural applications for augmented reality
source	Venetia Giagourta, Michael G. Strintzis (ed.): International Conference on Augmented, Virtual Environments and Three-Dimensional Imaging, Verlag Myconos, pp. 14-17
summary	This paper will discuss possible fields of applications of AR/VR for revitalization of buildings from a user's perspective. Considerations are based on the real-world project "Cooling factory Gera". The project is founded by "Deutsche Forschungsgesellschaft (DFG)".
series	other
email
last changed	2003/02/26 18:58

_id	a3e8
authors	Economou, Athanassios
year	2001
title	Four Algebraic Structures In Design
doi	https://doi.org/10.52842/conf.acadia.2001.192
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 192-201
summary	A constructive program for the generation of three-dimensional languages of designs based on nested group structures is outlined.
keywords	Computational Design, Symmetry, Group Theory, Shape Grammars, VRML
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ebd0
authors	Eggink, Dustin
year	2001
title	Smart Objects: Constraints and Behaviors in a Dimensional Design
source	University of Washington, Design Machine Group
summary	Each new design problem in architecture presents a new set of requirements .A designer must remain aware of these requirements and effectively communicate them to collaborators because the degree to which the requirements are met will determine the success of the solution. This thesis explores how design can be effectively presented in a medium that is both explorative of form and descriptive of the design problem’s requirements. To facilitate this, we present Smart Objects, a constraint-based three-dimensional(3D) computer program. In Smart Objects, design intentions of an architectural problem are embedded as constraints into the modeled objects that compose a formal solution. A model is presented through a 3DVirtual Reality Modeling Language (VRML) viewer and constrained by a software program we wrote in the Java language. Both the VRML viewer and the Java program are contained within a single web page. In Smart Objectsd. A designer meets or violates constraints, objects behave in a manner that reflects the requirements of the problem and intentions of the designer. SmartObjects communicates the design principles and guidelines that inform an architectural design to the collaborators involved in the project. It ensures that these principles and guidelines are maintained as the design progresses.
series	thesis:MSc
email
more	http://dmg.caup.washington.edu/xmlSiteEngine/browsers/stylin/publications.html
last changed	2004/06/02 19:12

_id	7e02
authors	Elger, Dietrich and Russell, Peter
year	2002
title	The Virtual Campus: A new place for (lifelong) learning?
doi	https://doi.org/10.52842/conf.ecaade.2002.472
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 472-477
summary	472 eCAADe 20 [design e-ducation] Modeling Real and Virtual Worlds Session 13 In the early spring of 2001 a collection of German universities founded a virtual faculty of architecture, which was named „Liquid Campus“. Current thinking about future forms of education in the field of architecture combined with over 4 years of experience with net-based design studios, led to questions about the future of existing universities, their buildings and their use. This problem was put to 43 students in the form of a design exercise to create a place for a virtual university. In the current situation, in which the administration of knowledge is more and more located on the internet, and even the so-called meeting places themselves can be virtualised through the help of video-conference-software, the exercise was to design a virtual campus in the framework and to carry out this design work in a simulation of distributed practice. Initial criticism of the project came from the students in that exemplary working methods were not described, but left for the students to discover on their own. The creation of a concept for the Liquid Campus meant that the participants had to imagine working in a world without the face to face contacts that form the basis (at present) of personal interaction. Additionally, the assignment to create or design possible links between the real and the virtual was not an easy task for students who normally design and plan real physical buildings. Even the tutors had difficulties in producing focused constructive criticism about a virtual campus; in effect the virtualisation of the university leads to a distinctive blurring of its boundaries. The project was conducted using the pedagogical framework of the netzentwurf.de; a relatively well established Internet based communication platform. This means that the studio was organised in the „traditional“ structure consisting of an initial 3 day workshop, a face to face midterm review, and a collective final review, held 3,5 months later in the Museum of Communication in Frankfurt am Main, Germany. In teams of 3 (with each student from a different university and a tutor located at a fourth) the students worked over the Internet to produce collaborative design solutions. The groups ended up with designs that spanned a range of solutions between real and virtual architecture. Examples of the student’s work (which is all available online) as well as their working methods are described. It must be said that the energy invested in the studio by the organisers of the virtual campus (as well as the students who took part) was considerably higher than in normal design studios and the paper seeks to look critically at the effort in relation to the outcomes achieved. The range and depth of the student’s work was surprising to many in the project, especially considering the initial hurdles (both social and technological) that had to overcome. The self-referential nature of the theme, the method and the working environment encouraged the students to take a more philosophical approach to the design problem. The paper explores the implications of the student’s conclusions on the nature of the university in general and draws conclusions specific to architectural education and the role of architecture in this process.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	5225
authors	Gomez de Silva Garza, Andres and Maher, Mary Lou
year	2001
title	Using Evolutionary Methods for Design Case Adaptation
doi	https://doi.org/10.52842/conf.acadia.2001.180
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 180-191
summary	Case-based reasoning (CBR) provides a methodology for directly using previous designs in the development of a new design. An aspect of CBR that is not well developed for designing is the combination and adaptation of previous designs. The difficulty with this aspect of case-based design is partly due to the extensive amounts of specialised knowledge needed to select the appropriate features of a previous design to include in the new design and the adaptation of these features to fit the context of a new design problem. In this paper we present a design process model that combines ideas from CBR and genetic algorithms (GA’s). The CBR paradigm provides a method for the overall process of case selection and adaptation. The GA paradigm provides a method for adapting design cases by combining and mutating their features until a set of new design requirements and constraints are satisfied. We have implemented the process model and illustrate the model for residential floor plan layout. We use a set of Frank Lloyd Wright prairie house layouts as the case base. The constraints used to determine whether new designs proposed by the process model are acceptable are taken from feng shui, the Chinese art of placement. This illustration not only clarifies how our process model for design through the evolutionary adaptation of cases works, but it also shows how knowledge sources with distinct origins can be used within the same design framework.
keywords	Evolutionary Design, Case-Based Reasoning, Floor Plan Layout
series	ACADIA
email
last changed	2022/06/07 07:51

For more results click below: