Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 716

Reformat results as: short short into frame detailed detailed into frame

_id	7313
authors	Mahdavi, A., Brahme, R. and Gupta, S.
year	2001
title	Performance-based computational design via differential modeling and two-staged mapping
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 667-680
summary	Computational performance-based building design support faces a conflict. It is important to provide building performance feed back to the designer as early as possible in the design process. But many aspects of building performance are significantly affected by the design of the building’s technical systems, which are typically configured in detail only in the later stages of design. The challenge is thus to find a method to use detailed simulation tools even during the early stages of design when values for many of the variables for the building’s technical sub-systems are not yet available. In this paper, we demonstrate how this problem can be partially solved by combining two levels of automation. The first level consists of differential building representation involving a number of domain (application-specific) object models that are derived from a shared object model automatically. The second level uses generative agents that create reference designs for the technical sub-systems of the building. To demonstrate the feasibility of the proposed approach, we use the building energy systems domain (heating, cooling, ventilation, and air-conditioning) as a case in point.
keywords	Building Performance Simulation, Homology-Based Mapping, Intelligent Design Agents
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	4112
authors	Raposo, M., Sampio, M. and Raposo, P.
year	2001
title	A City Simulator
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 052-061
doi	https://doi.org/10.52842/conf.acadia.2001.052
summary	This paper presents a new computer model for city skyline simulation. It works by shaping medium and high-rise buildings to their best performance. This new tool was conceived to simulate and analyze cities where tall buildings are emerging on pre-existing urban schemes with irregular geometry and where inter-building spacing is proportional to the height of built blocks. The model is based on two main inputs, namely: the description of the network formed by land subdivision of the actual or irregular urban schemes, and the building regulations quantitative parameters based on solar obstruction angles and maximum usability rates. By combining data from these inputs, the computer model presents the dimensions of the building envelop for maximum profitability of each plot. That way the architect will immediately know the number of floors that leads to the maximum built area, for certain plots. In addition to this, the built blocks images are presented in the screen, as well as corresponding tables and Cartesian graphs. Furthermore, this model can also be used for analyzing city skyline for large urban areas. This analysis can range from a mere visual inspection of the variety of images built blocks will take under different legal constraints, to a more intricate analysis of how city skyline and built area, amongst others, are affected by different the regulations.
keywords	Computing City Shape, Land use performance, Computing city skyline, Urban network design, Computing City Architecture.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	0767
authors	Ries, Robert and Mahdavi, Ardeshir
year	2001
title	Evaluation of Design Performance through Regional Environmental Simulation
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 629-642
summary	Computational building simulation tools have historically viewed buildings as artefacts isolated and disconnected from their contexts. At most, the external environmental conditions have been viewed as outside influences or stressors encapsulated in, for example, weather files for energy simulation or sky models for lighting simulation. In the field of environmental assessment, life cycle analysis (LCA) has followed a similar path of isolating the artefact under analysis from its context. Modeling the building artefact as a participant in multiple contexts over time so that the interactions and dependencies between the regions and the building can be adequately explored in the design process requires support for the modeling of regional areas, as well as the artefact and the related life cycle processes. Using computational design and evaluation tools can provide the computing capability required for effective design decision support. This paper presents the implementation of the affordance impact assessment method and the regional environmental simulation in Ecologue. Ecologue is the computational tool for life cycle environmental impact assessment in the SEMPER integrated building design and simulation system. Ecologue contains a building model and an environmental model. The building model is automatically derived from the shared building model of the SEMPER system. The environmental model is a combination of a representation of the processes and emissions occurring in the life cycle of buildings and an impact assessment model. The impact assessment model is a combination of a context model of the physical characteristics of a region and a sub-regional fate and transport model based on the fugacity concept.
keywords	Environmental Simulation, Design Decision Support, Life Cycle Analysis
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	3501
authors	Wang, Shengwei and Zheng, Ling
year	2001
title	Dynamic and real-time simulation of BMS and air-conditioning system as a `living' environment for learning/training
source	Automation in Construction 10 (4) (2001) pp. 487-505
summary	Dynamic and real-time simulation models are developed to simulate the thermal, hydraulic, mechanical, environmental and energy performance of building a variable air volume (VAV) air-conditioning system and its building management system (BMS). On-line direct digital control (DDC) and supervisory strategies of the BMS controlling the dynamic air-conditioning system are simulated. A window-based users interface is developed to simulate the man–machine interface of a BMS, through which users can monitor the on-line operation, tune the local control loops, and reset the supervisory control strategies. This paper presents models, simulation software, and examples that users practice on the simulated on-line BMS and air-conditioning system using the software.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	174f
authors	Bakker, N.H.
year	2001
title	Spatial Orientation in Virtual Environments
source	Delft University of Technology
summary	Recently, a growing interest can be detected in the application of Virtual Environment (VE) technology as an operator interface. VEs are three-dimensional computer-generated images that can be shown on a conventional monitor, on a large screen display, or on a head-mounted display. In order to use these three-dimensional interfaces for finding and retrieving information, the user must be able to spatially orient themselves.Different types of VE technology are available for navigating in these VEs, and different types of navigation can be enabled. A choice has to be made between the different options to enable good spatial orientation of the user. There are two main types of VE interfaces: an immersive interface that provides rich sensory feedback to the user when moving around in the VE, and a non-immersive interface that provides only visual feedback to the user when moving around in the VE. Furthermore, navigation through the VE can either be continuous providing fluent motion, or can be discontinuous which means that the viewpoint is displaced instantaneously over a large distance.To provide insight into the possible effects of these options a series of nine experiments was carried out. In the experiments the quality of spatial orientation behaviour of test subjects is measured while using the different types of interface and the different types of navigation.The results of the experiments indicate that immersive navigation improves the perception of displacement through the VE, which in turn aids the acquisition of spatial knowledge. However, as soon as the spatial layout of the VE is learned the two types of navigation interface do not lead to differences in spatial orientation performance. A discontinuous displacement leads to temporary disorientation, which will hinder the acquisition of spatial knowledge. The type of discontinuous displacements has an effect on the time needed for anticipation. The disorienting effects of a discontinuous displacement can be compensated for by enabling cognitive anticipation to the destination of the displacement.These results suggest that immersive navigation might only be beneficial for application domains in which new spatial layouts have to be learned every time or in domains where the primary users are novices. For instance, in training firemen to teach them the layout of new buildings with VE, or in using architectural walkthroughs in VE to show new building designs to potential buyers. Discontinuous movement should not be allowed when exploring a new environment. Once the environment is learned and if fast displacement is essential then discontinuous displacement should be preferred. In this case, the interface designer must make sure that information is provided about the destination of a discontinuous displacement.
series	thesis:PhD
last changed	2003/11/21 15:16

_id	34d2
authors	Rottensteiner, Franz
year	2001
title	Semi-automatic extraction of buildings based on hybrid adjustment using 3D surface models and management of building data in a TIS
source	Vienna University of Technology
summary	A new method for semi-automatic building extraction together with a concept for storing building models alongside with terrain data in a topographical information system (TIS) is presented. A user interface based on Constructive Solid Geometry is combined with an internal data structure completely based on boundary representation. Each building can be de-composed into a set of simple primitives which are reconstructed individually. After selecting a primitive from a data base of common building shapes, the primitive parameters can be modified by interactive measurement in digital images in order to provide approximate values for automatic fine measurement. In all phases, the properties of the boundary models are directly connected to parameter estimation: the parameters of the building primitives are determined in a hybrid adjustment of camera co-ordinates and fictitious observations of points being situated on building faces. Automatic fine measurement is an application of a general framework for object surface reconstruction using hierarchical feature based object space matching. The integration of object space into the matching process is achieved by the new modeling technique. The management of both building and terrain data in a TIS is based on a unique principle. Meta data are managed in a relational data base, whereas the actual data are treated as binary large objects. The new method is evaluated in a test project (image scale: 1:4500, 70 % overlap, 50 % side lap). The automatic tool gives results with an accuracy of +-2-5 cm in planimetric position and +-5-10 cm in height.
keywords	Building Extraction; Semi-automatic building extraction; Object modelling; 3D City models; Data acquisition; Spatial Information Systems; Image matching; Photogrammetry
series	thesis:PhD
email
more	http://www.ipf.tuwien.ac.at/fr/buildings/diss/node5.html
last changed	2003/02/12 22:37

_id	avocaad_2001_13
id	avocaad_2001_13
authors	Alexander Koutamanis
year	2001
title	Modeling irregular and complex forms
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Computational technologies provide arguably the first real opportunity architectural design has had for a comprehensive description of built form. With the advent of affordable computer-aided design systems (including drafting, modeling, visualization and simulation tools), architects believe they can be in full control of geometric aspects and, through these, of a wide spectrum of other aspects that are implicit or explicit in the geometric representation. This belief is based primarily on the efficiency and effectiveness of computer systems, ranging from the richness and adaptability of geometric primitives to the utility of geometric representations in simulations of climatic aspects. Such capabilities support attempts to design and construct more irregular or otherwise complex forms. These fall under two main categories: (1) parsing of irregularity into elementary components, and (2) correlation of the form of a building with complex geometric structures.The first category takes advantage of the compactness and flexibility of computational representations in order to analyse the form of a design into basic elements, usually elementary geometric primitives. These are either arranged into simple, unconstrained configurations or related to each other by relationships that define e.g. parametric relative positioning or Boolean combinations. In both cases the result is a reduction of local complexity and an increase of implicit or explicit relationships, including the possibility of hierarchical structures.The second category attempts to correlate built form with constraints that derive usually from construction but can also be morphological. The correlation determines the applicability of complex geometric structures (minimally ruled surfaces) to the description of a design. The product of this application is generally variable in quality, depending upon the designer's grounding in geometry and his ability to integrate constraints from different aspects in the definition of the design's geometry.Both categories represent a potential leap forward but are also equally hampered by the rigidity of the implementation mechanisms upon which they rely heavily. The paper proposes an approach to making these mechanisms subordinate to the cognitive and technical aspects of architectural thinking through fuzzy modeling. This way of modeling involves a combination of (a) canonical forms, (b) tolerances around canonical forms and positions, (c) minimal and maximal values, (d) fuzzy boundaries, and (e) plastic interaction between elements based on the dual principles of local intelligence and autonomy. Fuzzy models come therefore closer to the intuitive manners of sketching, while facilitating transition to precise and complex forms. The paper presents two applications of fuzzy modeling. The first concerns the generation of schematic building layouts, including adaptive control of programmatic requirements. The second is a system for designing stairs that can adapt themselves to changes in their immediate environment through a fuzzy definition of geometric and topological parametrization.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_05
id	avocaad_2001_05
authors	Alexander Koutamanis
year	2001
title	Analysis and the descriptive approach
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The rise of consciousness concerning the quality of working and living conditions has been a permanent though frequently underplayed theme in architecture and building since the reconstruction period. It has led to an explosive growth of programmatic requirements on building behaviour and performance, thus also stimulating the development of design analysis. The first stage of development was characterized by the evolution of prescriptive systems. These reversed the structure of pre-existing proscriptive systems into sequences of known steps that should be taken in order to achieve adequate results. Prescriptive systems complemented rather than replaced proscriptive ones, thereby creating an uncertain mixture of orthodoxy and orthopraxy that failed to provide design guidance for improving design performance and quality.The second stage in the development of design analysis focuses on descriptive methods and techniques for analyzing and supporting evaluation. Technologies such as simulation and scientific visualization are employed so as to produce detailed, accurate and reliable projections of building behaviour and performance. These projections can be correlated into a comprehensive and coherent description of a building using representations of form as information carriers. In these representations feedback and interaction assume a visual character that fits both design attitudes and lay perception of the built environment, but on the basis of a quantitative background that justifies, verifies and refines design actions. Descriptive analysis is currently the most promising direction for confronting and resolving design complexity. It provides the designer with useful insights into the causes and effects of various design problems but frequently comes short of providing clear design guidance for two main reasons: (1) it adds substantial amounts of information to the already unmanageable loads the designer must handle, and (2) it may provide incoherent cues for the further development of a design. Consequently the descriptive approach to analysis is always in danger of been supplanted by abstract decision making.One way of providing the desired design guidance is to complement the connection of descriptive analyses to representations of form (and from there to synthesis) with two interface components. The first is a memory component, implemented as case-bases of precedent designs. These designs encapsulate integrated design information that can be matched to the design in hand in terms of form, function and performance. Comparison between precedents with a known performance and a new design facilitate identification of design aspects that need be improved, as well as of wider formal and functional consequences. The second component is an adaptive generative system capable of guiding exploration of these aspects, both in the precedents and the new design. The aim of this system is to provide feedback from analysis to synthesis. By exploring the scope of the analysis and the applicability of the conclusions to more designs, the designer generates a coherent and consistent collection of partial solutions that explore a relevant solution space. Development of the first component, the design case-bases, is no trivial task. Transformability in the representation of cases and flexible classification in a database are critical to the identification and treatment of a design aspect. Nevertheless, the state of the art in case-based reasoning and the extensive corpus of analysed designs provide the essential building blocks. The second component, the adaptive generative system, poses more questions. Existing generative techniques do not possess the necessary richness or multidimensionality. Moreover, it is imperative that the designer plays a more active role in the control of the process than merely tweaking local variables. At the same time, the system should prevent that redesigning degenerates into a blind trial-and-error enumeration of possibilities. Guided empirical design research arguably provides the means for the evolutionary development of the second component.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	f9d8
authors	De Valpine, John and Black, Benjamin
year	2001
title	Physically Based Daylight Simulation and Visualization
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 406-407
doi	https://doi.org/10.52842/conf.acadia.2001.406
summary	While architects typically agree that daylight is a powerful influence for design, architects rarely collect and use daylighting data to help make informed design decisions. This deficiency exists partially because there are no common tools available to provide useful and accessible data. The objective of this project is to provide accurate daylighting data of a prominent urban building site and present it in a clear way so that the architects can make well informed design decisions that respond to site daylighting conditions and improve architectural performance. An urban 3D computer model was created with AutoCad, a commercial CAD application. Daylight was simulated with Radiance, the physically based rendering engine developed at Lawrence Berkeley National Laboratory. The standard CIE model for clear sky and sun was used to produce over 500 images that represent daylight conditions for three different times of year at 10 minute intervals in both luminance and illuminance formats. The simulation data was packaged for analysis with a unique browser tool that enables the architect to easily cycle through the data to evaluate and compare behavior by time of day and by season. The architect can also toggle between luminance and illuminance format to easily visualize both qualitative and quantitative data. The exploration and use of the simulation data can be applied with sensitivity to inform the design and decision making process for the exterior building site.
series	ACADIA
last changed	2022/06/07 07:55

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
doi	https://doi.org/10.52842/conf.acadia.2016.140
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	4664
authors	Russell, Peter
year	2001
title	Visualising Non-Visual Building Information
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 546-551
doi	https://doi.org/10.52842/conf.ecaade.2001.546
summary	Architecture can be understood as a process and as an object. In both forms, it consists of a complex of mass, monetary, energy and information flows that occur over time scales ranging from hours and days to centuries. The parts or elements making up buildings and the processes involved in producing, maintaining, using and disposing of them are highly intertwined and multi-dimensional. The field of Architecture can range from complete building stocks down to individual buildings, their elements, and the materials and processes making up these elements. What is more, it is also necessary to introduce time as a dimension in order to model the complete life cycle of buildings. Current CAD systems concentrate primarily on the replication of the traditional drawing process (sometimes in three dimensions) and the visualisation of the finished building. While these models describe the geometry and visual appearance of buildings, the bulk of the information about the building remains unseen. Recently developed systems such as the German LEGOE system have combined a materials database with specification and CAD systems, which allows for a more comprehensive description of the building. However, this additional information is displayed either rudimentarily or as lists of numbers. The information describing the position or visual quality of building elements is, in fact, minuscule in comparison to that describing the properties of the materials involved, their production methods, the energy needed to produce, transport and install the elements, and information concerning toxicology and environmental issues. What is more, these materials are not simply in situ, but can be considered to flow through the building. These flows also occur at widely varying rates according to the type of material and the type of building. The view is taken that buildings are actually temporary repositories of various “flows” which occupy the building during its lifetime. Thus seen, the various aspects of a building at a certain stage of its life are taken to be the total sum of its inputs and outputs at any given time. Currently, its complexity and the lack of cognitive assistance in its presentation limit the understanding of this information. The author postulates that to better understand this information, visual displays of this “non-visual” building information are needed, at least for those who, like architects, are more visually inclined. The paper describes attempts made to go beyond conventional two-dimensional charts, which have tended to only complicate understanding. This is partly due to the need to display a high number of dimensions in one space. Examples are shown of experimental visual displays using three-dimensional graphs created in VRML as well as a “remodelling” of the building based on statistical rather than spatial information to form a building “artefact”. The remodelled artefacts are based on a null-value three-dimensional form and are then modified according to the specific database information without changing their topology. These artefacts are initially somewhat idiosyncratic, but become more useful when a large enough population has been created. With sufficient numbers, it is possible to compare and classify the artefacts according to their visually discernible attributes. The classification of the artefacts is useful in understanding building types independent of their formal “architectural” or spatial qualities, particularly with age-use-classes. The paper also describes initial attempts to create building information landscapes that unfold from the artefacts allowing detailed views of the summarised information displayed by the individual artefacts.
keywords	Building Information, Visualisation, VRML, Life Cycle Analysis
series	eCAADe
email
last changed	2022/06/07 07:56

_id	2dba
id	2dba
authors	Tasli, S
year	2001
title	WHAT DOES COMPUTER AIDED DESIGN OFFER FOR PRODUCING LIVABLE BUILDINGS IN THE 21ST CENTURY?
source	Proceedings of the Livable Environments and Architecture International Congress (LIVENARCH 2001). July 4-7, 2001, Trabzon, Turkey, pp. 278-282.
summary	Designing livable buildings has always been a major concern for architects but they are often criticized on account of failing in this aim. However, this is not only due to the ignorance of the designers, but also of the complexity of the factors that are essential to design but difficult to incorporate the design process. Buildings are shaped and occupied under several dynamically changing conditions and paper-based media and conventional Computer Aided Design (CAD) tools are inefficient in representing them. This paper aims to discuss the changing role of digital media for architectural design in response to the increasing complexity of design processes. Some proposals, supported by recent technological innovations, are suggested for the future and they are compared with the conventional uses of CAD. It is claimed that in the 21st century, the main advantage of using computers will be to dynamically simulate buildings in time in highly visualized virtual environments to evaluate the future performance of proposed designs. The design model will not only look as if it were real, but it will also “behave” as if it were real so as to provide dynamic and intelligent response. The two key technologies for the development of such modeling, virtual reality and object-oriented programming are addressed and four promising application areas for near future (evaluation of user-building interaction, visualization of environmental factors, construction scheduling, and combined CAD-GIS) are discussed. Some important considerations for the development of dynamically simulated virtual models are analyzed and suggestions are made for further research.
keywords	Architectural Design, Dynamic Simulation, and Virtual Environments
series	other
type	normal paper
email
last changed	2005/12/01 16:02

_id	11a6
authors	Trebilcock, M., Burdiles, R. and Fissore, A.
year	2001
title	LA MODELACIÓN Y SIMULACIÓN ENERGÉTICO-AMBIENTAL COMO HERRAMIENTA DE REDISEÑO ARQUITECTÓNICO (The Modeling and Simulation of a Power-Based Environment Tool of Architectural Redesign)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 83-85
summary	The aim of this paper is to explore the potential of building simulation programs as an evaluation and redesign tool. The research work consisted on the evaluation of thermal comfort in three low cost houses situated on different climatic zones of Chile, in order to create a matrix of appropriate redesign strategies with an adequate analysis of cost and benefits. Conclusions stressed out that building simulations programs are a useful tool for evaluating building performance, but detailed programs are still unfriendly to use widely by architects.
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	3645
authors	Tsou, Jin-Yeu
year	2001
title	Strategy on applying computational fluid dynamic for building performance evaluation
source	Automation in Construction 10 (3) (2001) pp. 327-335
summary	Predicting and evaluating building performance plays an important role in the training of responsible architects. Building performance includes issues such as: structural stability, acoustic quality, natural lighting, thermal comfort, and ventilation and indoor air quality. These types of analyses are often laborious, non-intuitive, and non-graphical. As a result, these important issues do not arouse the enthusiasm of architecture students or building professionals. The Chinese University of Hong Kong (CUHK) research team proposes to explore and develop a long-term strategy to apply scientific visualization on teaching and research in environmental technology and building performance. This paper presents the development process and results of research projects for applying computational fluid dynamics (CFD) on building performance evaluation. CFD On-line Teaching project's aim is to develop a web-based training course for architecture students to apply CFD simulation on design problem solving. Each lesson not only illustrates basic principles regarding airflow in the building design, it also contains CFD sample files with predefined flow cells for students to test different concepts. GiLin Temple project's aim is to apply CFD simulation on investigating the wind resistance of Tong Dynasty heavy timber structure. Airflow information generated in the project includes the visual representation of the pressure distribution and velocity field on all slices through the temple, and the tracking of particles as they flow around or through a building. The China housing residential airduct study focuses on simulating the indoor airflow regarding the airduct design of China Experimental Urban Housing Scheme. The visual representation of the pressure distribution and velocity field in the airducts provides vital information for helping China Housing Research Center improve the current design.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	ecaade03_373_117_wittkopf
id	ecaade03_373_117_wittkopf
authors	Wittkopf, Stephen K. and Foo, E-Jin
year	2003
title	Discussing Image-Based Modeling Technology for 3D Digital Archival of Physical Architecture Models
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 373-380
doi	https://doi.org/10.52842/conf.ecaade.2003.373
summary	Besides drawings, physical models are important forms of representation commonly used for architectural design. They can serve as a useful resource for teaching and research, provided there is a proper archiving system that allows easy retrieval. Architectural models in 3D digital format seem to be able to overcome the limitation of physical constraints – they can be easily accessed anytime and anywhere over the Internet. The most common way of 3D model documentation is through geometric-based 3D CAD software. Image-based modeling (IM) allows the 3D digital model to be created from photographic images. Debevec (1998) investigated the hybrid geometry- and image-based approach whilst Tsou (2002) and Hawkins (2001) focused on the application of IM for GIS and digitizing cultural artifacts respectively. This paper aims to compare physical models and their IM counterparts in terms of communication of vital architectural information. Experiments were conducted to evaluate the extent the IM model resembled the physical predecessor in terms of its geometry and visual appearance qualities/faithfulness. A survey was subsequently carried out to compare their performance in terms of the communication of vital architectural information about building designs to the observers. The tabulated results were then examined to help understand the opportunities and weakness of IM for 3D archival of physical architecture models
keywords	Image-based modeling, architecture model, digital archiving, design resource
series	eCAADe
email
more	http://www.arch.nus.edu.sg/akiskw
last changed	2022/06/07 07:57

_id	ea46
authors	Colajanni B., Concialdi, S. and Pellitteri, G.
year	2001
title	Construction or Deconstruction: Which is the Best Way to Learn Architecture?
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 299-304
doi	https://doi.org/10.52842/conf.ecaade.2001.299
summary	The actual shift of the teaching methods from teacher-centred expository methods, to learner-centred exploratory ones. The educational goals are no more the construction of a solid theory knowledge from which the behaviour is driven. It is the acquisition of capabilities and skills directly related to the professional activity. The consequence is that the teacher has the task of endowing the student not only with a large amount of documentation but also with at least suggestions of the way to use it. One of these suggestions is the deconstruction (in a literal and not philosophical sense) as a way of investigating the structure of buildings. In a first phase in order to acquire, through generalisation a systematic knowledge of the way the parts of a building (their subsystems) contribute to the global architectural organism. In a second phase in order to explore buildings of special interest aiming at mastering their peculiar solutions. An example of this method is presented, limited to the spatial analysis only both for brevity sake and for particular difficulties presented.
keywords	Deconstruction, Learn Architecture, Learning By Experience
series	eCAADe
email
last changed	2022/06/07 07:56

_id	912b
authors	Flemming, Ulrich and Aygen, Zeyno
year	2001
title	A hybrid representation of architectural precedents
source	Automation in Construction 10 (6) (2001) pp. 687-699
summary	We present a hybrid representation of architectural precedents that separates precedent instances from the concepts they embody, where the concepts are defined in terms of multiple classification taxonomies. The representation allows us to combine the classical view of concept acquisition with aspects of the probabilistic and exemplar views and to organize the database into the equivalents of "episodic" and "semantic" memory. A first application and test context is provided by the Software Environment to Support Early Building Design (SEED), where precedents are used as prototypes and cases. But the representation is flexible enough to support the use of precedents in other application contexts.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	7655
authors	Okeil, Ahmad and El Araby, Mostafa
year	2003
title	Realism vs. Reality in Digital Reconstruction of Cities
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	The digital reconstruction of existing cities using virtual reality techniques is being increasingly used. For consultants, municipalities and planning departments these models provide decision support through visual simulations (El Araby, 2001). For academia they provide a new tool for teaching students urban design and planning (Okeil, 2001). For authorities they provide a tool for promoting the city on the world wide web trying to attract more businesses and tourists to it. The built environment is very rich in detail. It does not only consist of open spaces surrounded by abstract buildings but it also includes many smaller objects such as street furniture, traffic signs, street lights, different types of vegetation and shop signs for example. All surfaces in the built environment have unique properties describing color, texture and opacity. The built environmentis dynamic and our perception is affected by factors such as pedestrian movement, traffic, environmental factors such as wind, noise and shadows. The built environment is also shaped by the accumulation of changes caused by many influences through time. All these factors make the reconstruction of the built environment a very complex task. This paper tries to answer the question: how realistic the reconstructed models of urban areas can be. It sees “Realism“ as a variable floating between three types of realties. The reality of the physical environment which we are trying to represent. The reality of the digital environment which will host the digitally reconstructed city. And the reality of the working environment which deals with the problem of limitation of resources needed to digitally reconstruct the city. A case study of building a 3D computer model of an urban area in the United Arab Emirates demonstrates that new time-saving techniques for data acquisition can enhance realism by meetingbudget limitations and time limitations.
keywords	Virtual Reality; Photo Realism; Texture Maps; 3D Modeling; Urban Design
series	other
email
last changed	2003/03/11 20:39

_id	737e
authors	Riegler, A. (ed.)
year	2001
title	Virtual Science: Virtuality and Knowledge Acquisition in Science and Cognition
source	Virtual Reality: Cognitive Foundations, Technological Issues & Philosophical Implications. Frankfurt am Main: Peter Lang
summary	The focus of this paper is the process of knowledge acquisition (KA) and which role virtuality plays in this context. We argue that there are three different modes of knowledge acquisition which can be identified both in the domains of cognition and science: the empirical, the "constructive", and the "synthetic" mode. We show that the method of constructing knowledge in the virtual domain (i.e., the synthetic mode of KA) is not only a principal mode of KA in our cognition (e.g., thought experiments, making plans, etc.). It becomes increasingly important in the field of (natural) science in the form of simulations and virtual experiments. The attempt to find an answer to the question of whether simulation can be an information source for science, and to validate the computational approach in science, leads to a new interpretation of the nature of virtual models. This new perspective renders the problem of "feature extraction" obsolete.
series	other
last changed	2003/04/23 15:50

_id	0bab
authors	Araya, Hirokazu and Kagoshima, Masayuki
year	2001
title	Semi-automatic control system for hydraulic shovel
source	Automation in Construction 10 (4) (2001) pp. 477-486
summary	A semi-automatic control system for a hydraulic shovel has been developed. Using this system, unskilled operators can operate a hydraulic shovel easily and accurately. A mathematical control model of a hydraulic shovel with a controller was constructed and a control algorithm was developed by simulation. This algorithm was applied to a hydraulic shovel and its effectiveness was evaluated. High control accuracy and high-stability performance were achieved by feedback plus feedforward control, nonlinear compensation, state feedback and gain scheduling according to the attitude.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

For more results click below: