Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 717

Reformat results as: short short into frame detailed detailed into frame

_id	811d
authors	Goulthorpe, M., Burry, M. and Dunlop, G.
year	2001
title	Aegis Hyposurface©: The Bordering of University and Practice
doi	https://doi.org/10.52842/conf.acadia.2001.344
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 344-349
summary	Throughout history, profound technological shifts have been accompanied by significant cultural changes. The current shift from a technical paradigm based on physical, mechanical production to one based on electronic media impacts on forms of architectural practice in unexpected ways. The use of design software not only enhances graphic and modeling capacity but also reveals new possibilities for both form generation and fabrication. At a more subtle level it may influence the patterns of thought and creativity that have underpinned traditional forms of architectural practice. This paper examines the implications of the redefined praxis by considering the new role of ‘town and gown’ in the production of the interactive hypersurface: the AegisHypersurface©, the first working prototype of which was unveiled in March 2001.
keywords	Real-Time Animation, Interactive Architecture, Hypersurface
series	ACADIA
email
last changed	2022/06/07 07:51

_id	7897
authors	Achten, Henri and De Vries, Bauke
year	2001
title	Multiple Sketch Users in DDDoolz
source	Stellingwerff, Martijn and Verbeke, Johan (Eds.), ACCOLADE - Architecture, Collaboration, Design. Delft University Press (DUP Science) / ISBN 90-407-2216-1 / The Netherlands, pp. 153-162 [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	This paper presents DDDoolz, a desktop-VR three-dimensional voxel sketchtool. DDDoolz is developed in the Design Systems Group to explore the use of Virtual Reality technology in the early design stage. The aim is to offer a sketch-like environment in VR with an unobtrusive interface. The paper presents DDDoolz, how it is used in education and with partners in architectural practice, and some future developments. As an extension to current functionality, the possibility of multiple users at the same time will be developed in the system for the {ACCOLADE} workshop.
series	other
email
last changed	2001/09/14 21:30

_id	7e52
authors	Achten, Henri
year	2001
title	Normative Positions in Architectural Design - Deriving and Applying Design Methods
doi	https://doi.org/10.52842/conf.ecaade.2001.263
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 263-268
summary	This paper presents a recently finished course of eight weeks where CAAD skills, design methodology, and architectural theory are combined to discuss possible perspectives on the use of the computer in design, and its influence on architecture. In the course, three contemporary architects were studied; Peter Eisenman, Ben van Berkel, and Greg Lynn. Each was discussed on aspects of ontology (which are the elements of discourse), design method (design process and organization of the process), and the use of the computer (techniques and approaches). These were linked with design theory, architectural theory, and CAD-theory. The reflection on the work of the architects resulted in a number of design methods for each architect. The design methods were adapted to the available technologies in the university as well as to the scope of the exercise, since the period of eight weeks for an exercise cannot compete with design processes in practice that take many participants and much time. The students then applied the design methods to a design task: student housing and an exhibition pavilion on the campus area of the university. The task was so devised, that students could focus on either architectural or urban design level with one of the design methods. Also, the choice of architects and accompanying design methods was made in such a way that students with low, medium, and advanced computer skills could take part in the course and exercise. In a workshop held at the Czech Technical University (CVUT) in Prague, the same procedure was used in a one-week period for a different design task, but in an otherwise almost identical setting with respect to the CAAD software used. The methods and material were easily transferred to the other setting. The students were able to cope with the task and produced surprising results in the short time span available. The paper will provide an overview of the course, discuss the pedagogical implications of the work, and discuss how this particular work can be generalized to incorporate other architects and approaches.
keywords	CAAD: Design Methods, Pedagogy
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2004_paper12
id	ascaad2004_paper12
authors	Al-Qawasmi, Jamal
year	2004
title	Reflections on e-Design: The e-Studio Experience
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	The influence of digital media and information technology on architectural design education and practice is increasingly evident. The practice and learning of architecture is increasingly aided by and dependant on digital media. Digital technologies not only provide new production methods, but also expand our abilities to create, explore, manipulate and compose space. In contemporary design education, there is a continuous demand to deliver new skills in digital media and to rethink architectural design education in the light of the new developments in digital technology. During the academic years 2001-2003, I had the chance to lead the efforts to promote an effective use of digital media for design education at Department of Architecture, Jordan University of Science and Technology (JUST). Architectural curriculum at JUST dedicated much time for teaching computing skills. However, in this curriculum, digital media was taught in the form of "software use" education. In this context, digital media is perceived and used mainly as a presentation tool. Furthermore, Computer Aided Architectural Design and architectural design are taught in separate courses without interactions between the two.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	1b10
id	1b10
authors	Bay, Joo-Hwa
year	2001
title	Cognitive Biases - The case of tropical architecture
source	Delft University of Technology
summary	This dissertation investigates, i) How cognitive biases (or illusions) may lead to errors in design thinking, ii) Why architects use architectural precedents as heuristics despite such possible errors, and iii) Develops a design tool that can overcome this type of errors through the introduction of a rebuttal mechanism. The mechanism controls biases and improves accuracy in architectural thinking. // The research method applied is interdisciplinary. It employs knowledge from cognitive science, environmental engineering, and architectural theory. The case study approach is also used. The investigation is made in the case of tropical architecture. The investigation of architectural biases draws from work by A. Tversky and D. Kahneman in 1982 on “Heuristics and biases”. According to Tversky and Kahneman, the use of heuristics of representativeness (based on similarity) and availability (based on ease of recall and imaginability) for judgement of probability can result in cognitive biases of illusions of validity and biases due to imaginability respectively. This theory can be used analogically to understand how errors arise in the judgement of environmental behaviour anticipated from various spatial configurations, leading to designs with dysfunctional performances when built. Incomplete information, limited time, and human mental resources make design thinking in practice difficult and impossible to solve. It is not possible to analyse all possible alternative solutions, multiple contingencies, and multiple conflicting demands, as doing so will lead to combinatorial explosion. One of the ways to cope with the difficult design problem is to use precedents as heuristic devices, as shortcuts in design thinking, and at the risk of errors. This is done with analogical, pre-parametric, and qualitative means of thinking, without quantitative calculations. Heuristics can be efficient and reasonably effective, but may not always be good enough or even correct, because they can have associated cognitive biases that lead to errors. Several debiasing strategies are discussed, and one possibility is to introduce a rebuttal mechanism to refocus the designer’s thinking on the negative and opposite outcomes in his judgements, in order to debias these illusions. The research is carried out within the framework of design theory developed by the Design Knowledge System Research Centre, TUDelft. This strategy is tested with an experiment. The results show that the introduction of a rebuttal mechanism can debias and improve design judgements substantially in environmental control. The tool developed has possible applications in design practice and education, and in particular, in the designing of sustainable environments.
keywords	Design bias; Design knowledge; Design rebuttal; Design Precedent; Pre-parametric design; Tropical architecture; Sustainability
series	thesis:PhD
type	normal paper
email
last changed	2006/05/28 07:42

_id	bbfa
authors	Donath, D., Beetz, J., Grether, K., Petzold, F. and Seichter, H.
year	2001
title	Augmented Reality Techniques for Design and Revitalisation in Existing Built Environments
doi	https://doi.org/10.52842/conf.acadia.2001.322
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 322-329
summary	Building activity in Germany is moving increasingly toward combined newbuild and renovation projects. Essential for effective computer-aided planning within an existing context is not only the use of on-site computer-aided measurement tools but also an integrative cooperation between the different disciplines involved via an information and communication system. Interdisciplinary cooperation needs to be tailored to the integrative aspects in renovation and revitalisation work. Economic factors determine the viability of an architectural project, and reliable costing information is vital. Existing IT-approaches to this problem are not yet sufficiently exploited. In ongoing research at our university (collaborative research center ”Materials and Structure in the Revitalisation of Buildings”) methods and techniques of revitalisation are being investigated. A special branch of the collaborative research center is investigating possibilities of computer-aided building measurement and communication platforms for professional disciplines (www.uni-weimar.de/sfb). The aim is to develop a general approach to the revitalisation of buildings. This paper discusses possible application areas of AR/VR techniques in the revitalisation of buildings from the point of view of the user and are based on the real project “Cooling factory Gera”. Based on the necessities of revitalisation projects, technical requirements are developed. The project is funded by the Deutsche Forschungsgesellschaft (DFG).
keywords	Augmented Reality, Architecture, Modernization, Measurement
series	ACADIA
email
last changed	2022/06/07 07:55

_id	7e02
authors	Elger, Dietrich and Russell, Peter
year	2002
title	The Virtual Campus: A new place for (lifelong) learning?
doi	https://doi.org/10.52842/conf.ecaade.2002.472
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 472-477
summary	472 eCAADe 20 [design e-ducation] Modeling Real and Virtual Worlds Session 13 In the early spring of 2001 a collection of German universities founded a virtual faculty of architecture, which was named „Liquid Campus“. Current thinking about future forms of education in the field of architecture combined with over 4 years of experience with net-based design studios, led to questions about the future of existing universities, their buildings and their use. This problem was put to 43 students in the form of a design exercise to create a place for a virtual university. In the current situation, in which the administration of knowledge is more and more located on the internet, and even the so-called meeting places themselves can be virtualised through the help of video-conference-software, the exercise was to design a virtual campus in the framework and to carry out this design work in a simulation of distributed practice. Initial criticism of the project came from the students in that exemplary working methods were not described, but left for the students to discover on their own. The creation of a concept for the Liquid Campus meant that the participants had to imagine working in a world without the face to face contacts that form the basis (at present) of personal interaction. Additionally, the assignment to create or design possible links between the real and the virtual was not an easy task for students who normally design and plan real physical buildings. Even the tutors had difficulties in producing focused constructive criticism about a virtual campus; in effect the virtualisation of the university leads to a distinctive blurring of its boundaries. The project was conducted using the pedagogical framework of the netzentwurf.de; a relatively well established Internet based communication platform. This means that the studio was organised in the „traditional“ structure consisting of an initial 3 day workshop, a face to face midterm review, and a collective final review, held 3,5 months later in the Museum of Communication in Frankfurt am Main, Germany. In teams of 3 (with each student from a different university and a tutor located at a fourth) the students worked over the Internet to produce collaborative design solutions. The groups ended up with designs that spanned a range of solutions between real and virtual architecture. Examples of the student’s work (which is all available online) as well as their working methods are described. It must be said that the energy invested in the studio by the organisers of the virtual campus (as well as the students who took part) was considerably higher than in normal design studios and the paper seeks to look critically at the effort in relation to the outcomes achieved. The range and depth of the student’s work was surprising to many in the project, especially considering the initial hurdles (both social and technological) that had to overcome. The self-referential nature of the theme, the method and the working environment encouraged the students to take a more philosophical approach to the design problem. The paper explores the implications of the student’s conclusions on the nature of the university in general and draws conclusions specific to architectural education and the role of architecture in this process.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	8805
authors	Flemming, U., Erhan, H.I. and Ozkaya, I.
year	2001
title	Object-Oriented Application Development in CAD
source	Technical Report 48-01-01. Pittsburgh, PA: Carnegie Mellon University, Institute of Complex Engineered Systems
summary	This report describes a graduate interdisciplinary course offered to students in the graduate program of the School of Architecture at Carnegie Mellon and related departments in fall 2000. The motivation was the realization that when commercial CAD (Computer-Aided Design) systems recently switched from procedural application programming languages to object-oriented ones, third-party application must undergo a significant cognitive retooling"; i. e. they must know more than the syntax and semantics of the new programming language to be used and must be able to employ appropriate software development strategies that are appropriate for the new paradigm. especially with respect to the importance of modeling, a distinguishing characteristic of object-oriented programming. The goal of the course was (a) to introduce and test strategies of object-oriented application development in general and in the context of MicroStation, a state-of-the-art commercial CAD package; (b) to develop-as a course team project-an interesting application that gives students practice with these strategies and team work; and (c) to document our approach and findings so that others can learn from them. The strategies introduced were the use-case approach of Jacobson et al. and the complementary object-modeling tools of Rumbaugh that were recently integrated into the Unified Modeling Language UML. The software platform supporting the course comprised MicroStation, JMDL (a superset of Java) and ProjectBank on the CAD side and RationalRose on the modeling side. The application developed by students in the course supports the generation of drawings for remodeling projects from a set of dgn files describing the existing state of the building to be remodeled. The course was supported by a grant and in-kind contributions from Bentley with matching funds from the Pennsylvania Infrastructure Technology Alliance (PITA)."
series	report
email
last changed	2003/04/23 15:50

_id	e6c5
authors	Heintz, John L.
year	2001
title	Coordinating virtual building design teams
source	Stellingwerff, Martijn and Verbeke, Johan (Eds.), ACCOLADE - Architecture, Collaboration, Design. Delft University Press (DUP Science) / ISBN 90-407-2216-1 / The Netherlands, pp. 65-76 [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	Most research in design project management support systems treats the subject as an isolated objective problem. The goals to be met are defined in terms of a supposed universal view of the project, and now outside concerns are taken into account. While such approaches, including project simulation, may yield excellent results, they ignore what, for many projects, are the real difficulties. Design projects are not isolated. All participants have other obligations that compete with the given project for attention and resources. The various participants in the design process have different goals. For these reasons it is proposed that design project management can be best facilitated by tools which assist the participating actors to share suitable management information in order to make better co-ordination possible, while allowing the resource balancing between projects to occur in private. Such a tool represents the design project management task as a negotiation task that spans both projects and firms; the management of one project is the management of all. The model of design collaboration upon which the Design Coordination System (DeCo) is built was developed from 1) a heuristic case study used to gain insight into the ways in which designers co-ordinate their efforts, and 2) the application of the theory of the social contract as developed by John Rawls to the problem of design project management. The key innovation in the DeCo system is the shaping of the project management system around existing practices of collaborative project design management and planning. DeCo takes advantage of how designers already co-ordinate their work with each other and resolve disputes over deadlines and time lines. The advantage of DeCo is that it formalises these existing practices in order to accommodate both the increasing co-ordination burden and the difficulties brought about by the internationalisation of design practice. DeCo, the design project management system proposed here, provides a representation, a communications protocol, and a game theoretical decision structure. The combination of these three units provides users with the ability to exchange structured pictures of the project as seen from the points of view of individual actors. Further, it suggests a mechanism based on a specific principle of fairness for arriving at mutually acceptable project plans. The DeCo system permits the users freedom to manage their design processes as they will, while providing a basic compatibility between practices of design team members which supports their collaborative efforts to co-ordinate their design work.
series	other
last changed	2001/09/14 21:30

_id	e9b1
authors	Heylighen, Ann and Neuckermans, Herman
year	2001
title	Destination: Practice – Towards a maintenance contract for the architect’s degree
doi	https://doi.org/10.52842/conf.acadia.2001.090
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 090-099
summary	Addressing the subject of Case-Based Reasoning (CBR) in architectural design, we present a Web-based design assistant for student- and professional architects called DYNAMO. Its main objective is to initiate and nurture the life-long process of learning from (design) experience as suggested by CBR’s cognitive model. Rather than adopting this model as such, DYNAMO extrapolates it beyond the individual by stimulating and intensifying several modes of interaction. One mode – the focus of this paper – concerns the interaction between the realm of design education and the world of practice. DYNAMO offers a platform for exchanging design efforts and insights, in the form of cases, between both parties, which perfectly chimes with the current tendency towards life-long learning and continuing education. Just like our university advises graduates to ‘Take a maintenance contract with your degree’, architecture schools may encourage recently qualified architects to subscribe to DYNAMO. To what extent the tool can fulfill this role of maintenance contract is discussed at the end of the paper, which reports on how DYNAMO was used and appreciated by professional architects at different levels of expertise.
keywords	Case-Based Reasoning, Web-Based Learning, Digital Repositories
series	ACADIA
email
last changed	2022/06/07 07:50

_id	b36d
authors	Lewis, Martin Lewis and Wojtowicz, Jerzy
year	2001
title	Design in the New Media - Digital Design Pedagogy at the SoA, University of British Columbia
doi	https://doi.org/10.52842/conf.ecaade.2001.256
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 256-261
summary	The idea of the Bauhaus education was born out of the conviction that designs for mass production and modern architecture needed a new fundamental design strategy. Today, seventy-five years later, the modern, basic design pedagogy needs to be revisited, as the impact of the Information Technology Revolution on design practice and education is now extensive. The illustrations and reflections on a modern curriculum for fundamental design and communication presented in this paper are derived from the authors’ introduction of the new media to design studios at UBC and from design practice. In the case of the nascent student of architecture, a different, rudimentary approach is required: one calling for the combining of the modern, basic design agenda with the introduction of the new media. The fundamental digital design pedagogy is young and not fully established. This is a considerable problem, since the practice and learning of architecture today is increasingly aided by and dependent upon digital media. Parallel to the traditional methods, the contemporary student of design is now obliged to engage new and dynamic conditions at the formative stage of his or her education. In the recent past, the computer was considered as just another device, requiring the development of mechanical techniques or skills. While those skills still have to be mastered, more recently in design education and practice, IT has become accepted as MEDIA - not just as a drafting or modeling tool. This process is perhaps due to the rapid dissemination of computing literacy and to the progressive accessibility and ease of use of IT. At UBC, Techniques and the Foundation Studio are introductory courses intended to make students engage the new media in parallel with, and complimentary to, established conventions in design.
keywords	Imagining, Communicating
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2007_114
id	ecaade2007_114
authors	Olmos, Francisco
year	2007
title	Training Programs for Art and Design Learning in the Virtual Studio
doi	https://doi.org/10.52842/conf.ecaade.2007.639
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 639-646
summary	Computers are very common drawing tools at university design studios but their potential as training tools in arts and design has not been explored in depth. In arts and design the learning process is based on ‘knowing in action’ (Schön 1983). Therefore, training is the keystone of the learning process in arts and design. This action takes the form of a reflective practice based on the manipulation of a media where each media has its own possibilities, its own limits in communicating design ideas or artistic concepts. With the introduction of digital media in the design studio, it is expected that reflective practices in design learning will experience a qualitative change. However, currently there is little understanding of how to use the digital and virtual media in a design studio as a learning tool (Szalapaj 2001), nor of the use of design training programs. In this paper the use of training programs in an experimental design course at a university level, is discussed. This experience was carried out as a PhD research experiment at the Faculty of Architecture and Arts of the Universidad de Los Andes in Merida, Venezuela. The training programs discussed here were designed for an eight week introductory design course in a virtual design studio. The programs were written in VRML and conceived as a virtual design training environment. Each program was designed for a specific design exercise, based on a learning strategy and an interactivity model proposed for object manipulation in design training. A comparative analysis of the data gathered from the course was made of training exercises done with a Cad program and with the training programs and crossing information with other sources. The experiment shows that the training programs, their learning strategy and the interactivity model proposed were successful in guiding the scope of the design exercises during the training process.
keywords	E-learning, virtual studio, design training, virtual environment
series	eCAADe
email
last changed	2022/06/07 08:00

_id	8c32
authors	Pittioni, Gernot
year	2001
title	Past, present and future issues with co-operating, seen from the engineering practice
source	Stellingwerff, Martijn and Verbeke, Johan (Eds.), ACCOLADE - Architecture, Collaboration, Design. Delft University Press (DUP Science) / ISBN 90-407-2216-1 / The Netherlands, pp. 83-94 [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	Co-operation and/or collaboration is a vital aspect in planning. Many partners have to share information and have to react - if possible - without delay. In order to get support by computers combined with modern and recently immensely improved means of communication we have to explore, how we (should) communicate and what would be necessary to support this - may be in a different or modified process - by new media. It is obvious that this investigation will be a different one, whether done by research-institutions or by highly active practitioners, who cannot afford a test-phase with non-reliable performance. This contribution tries to supply some aspects of an engineering partner within a number of project-teams.
series	other
last changed	2001/09/14 21:30

_id	3815
authors	Qaqish, Ra’ed
year	2001
title	VDS/DDS Practice Hinges on Interventions and Simplicity - A Case Study of Hard Realism vs. Distorted Idealism
doi	https://doi.org/10.52842/conf.ecaade.2001.249
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 249-255
summary	This paper reports on a contemporary and laborious ongoing experimental work initiated during the establishment of a new Virtual/Digital design studio “VDS” in Sept. 1999 by CAAD tutors at University of Petra “UOP”. The new VDS/DDS now works as an experimental laboratory to explore several solutions to problems of efficiency in design teaching as a new digital design studio paradigm, in tandem with CAD/Design staff, DS environment, materials and facilities. Two groups of graduating level students participated as volunteers in this experiment. The first group was comprised of three fifth-year architectural design students while the second group was comprised of two fourth-year interior design students. The media currently in use are ArchiCAD 6.5 as a design tool along with CorelDraw 9 as a presentational tool, running on Pentium III computers. The series of experiments evaluated the impression on architectural design studio tuition requirements arising from the changes brought about by the implementation of the new CAD pedagogical approach (VDS/DDS) at UOP. The findings echo several important key issues in tandem with CAAD, such as: the changes brought about by the new design strategies, adaptation in problem solving decision-making techniques, studio employment in terms of environment, means and methods. Other issues are VDS/DDS integration schemes carried out by both students and staff as one team in design studio practice on one hand and the curriculum on the other. Finally, the paper discusses the negative impact of conventional design studio hardliner teaching advocates and students alike whose outlook and impressions undermine and deplete effective CAAD integration and obstruct, in many instances, the improvement of such experiments in a VDS environment.
keywords	Design Studio Strategies, Problem Solving Decisions, Transformation And Integration Policies
series	eCAADe
email
last changed	2022/06/07 08:00

_id	4dd3
authors	Reymen, Isabelle M.M.J.
year	2001
title	Improving design processes through structured reflection : a domain-independent approach
source	Eindhoven University of Technology
summary	In the world of designing, three fields of attention can be recognised, namely design research, design practice, and design education. Gaps exist between these three fields. In this thesis about designing, the focus is on the gap between design research and design practice. Design practice includes many design disciplines and an increasing number of multidisciplinary teams. Main problems in design practice are the communication between designers with a different background and the integration and co-ordination of important aspects during a design process. By tackling these problems, the effectiveness and efficiency of design processes in practice can be improved. The study of similarities and differences between design processes in several design disciplines and the development of support for reflection on design processes are topics that can improve design practice and that deserve more attention in design research. The goal of my research is to decrease the gap between design research and design practice in order to improve design processes. Reflection on design processes can help designers to improve their design process, its results, and the designer’s proficiency: By reflecting explicitly on the current design situation and on the performed design activities, in a systematic way and on a regular basis, designers can plan next design activities that can be performed effectively and efficiently given the design goal at that moment. In this thesis, the combination of systematic and regular reflection is called structured reflection. To improve design processes in various design disciplines in practice, the study of similarities and differences between design processes in several disciplines can be useful. Similarities between design processes are the basis for domain-independent design knowledge (as distinguished from domain-specific design knowledge). To reach the goal of my research, I have chosen to combine, in a broad explorative study, the development of support for structured reflection on design processes and the development of domain-independent design knowledge. This thesis describes a domain-independent approach to improve design processes through structured reflection. My research process can be summarised as follows. I studied three design disciplines, namely architecture, mechanical engineering, and software engineering. To get input from design practice, I did qualitative empirical research: I performed twelve case studies in the three disciplines to inventory characteristics of design processes and I compared the cases for similarities and differences. The similarities, together with the results of a literature study, have been the basis for the development of domain-independent descriptive design knowledge. The developed descriptive knowledge, in turn, formed the basis for developing domain-independent prescriptive design knowledge. At the end of the project, I confronted all results with design practice to get feedback on the results in another empirical study and I performed a literature study to position the results in the design literature. My design philosophy and design frame are the descriptive results developed to answer the first research question, namely “How to describe design processes in a domain-independent way?”. My design philosophy is a set of domain-independent concepts and terms for describing a design process. The concepts and terms are based on an application of the general theory of state-transition systems to the context of designing; the concepts of state and state transition correspond to the main concepts of design situation and design activity in my design philosophy. The answer to the first research question given by the design philosophy is refined in a design frame: The design frame offers a means to structure the description of a design process in a domain-independent way. Major structuring concepts of the design frame are dimensions and subjects. I define three dimensions, namely level, perspective, and time. These dimensions define a three-dimensional space, called a positioning space, in which important aspects of design processes can be positioned. A positioning space must be defined for each subject, being the three parts of a design situation: the product being designed, the design process, and the design context. My design frame is a domain-independent structure formed by the combination of the three dimensions for each subject. My design method is the prescriptive result developed to answer the second research question, namely “How to support structured reflection on design processes in a domain-independent way?”. My design method is a domain-independent aid that offers designers support for reflecting on design processes in a structured way. Reflection on design processes is defined as an introspective contemplation on the designer’s perception of the design situation and on the remembered design activities. A reflection process is described as a process that consists of three steps that are called preparation, image forming, and conclusion drawing. The design method is based on two main concepts: The first concept is the systematic description and analysis of design situations and design activities by means of forms and checklists; only systematic support for the preparation step of a reflection process is developed. The second concept is the idea of design sessions, introduced to stimulate designers to reflect regularly during a design process. A design session is defined as a period of time during which one or more designers are working on a subtask of a certain design task, for example, one afternoon, a whole day, or a week. Both concepts are combined to support structured reflection on design processes. The complete design method consists of five steps for each design session, namely planning a design session, defining the subtask of the design session, reflecting at the beginning of a design session, designing during the core of a design session, and reflecting at the end of a design session. A prototype software tool, called ECHO, has been developed to explore the benefits of using a software system to facilitate the use of the design method. Together, the design philosophy and the design frame offer concepts, a vocabulary, and a structure to describe design processes in a domain-independent way. The design method is a first proposal of a method that supports structured reflection on design processes. My results are thus possible answers to the mentioned research questions and are starting points to improve the effectiveness and efficiency of design processes. Based on the feedback I collected, I am optimistic about the applicability of my results in design practice. By asking input from design practice and by developing results that are useful for design practice and that contribute to design research, I contribute to decrease the gap between design research and design practice. The most important recommendations for further research are to test all results extensively in design practice and to investigate how to apply the results in design education.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	604c
authors	Ruffle, Simon and Richens, Paul
year	2001
title	Web Based Consultation for Cambridge University’s Building Program
doi	https://doi.org/10.52842/conf.acadia.2001.366
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 366-371
summary	This two-year project is researching the web as a communications medium for better client-ship in the construction industry. The Martin Centre is developing a web site that presents Cambridge University’s £500 million ($700m) current building program to staff, students, alumni, and the citizens of Cambridge. Focussing on the University’s master plans for the Sidgwick and West Cambridge teaching campuses, the project is in collaboration with the University Estate Management and Building Service (EMBS), General Board, West Cambridge Project Office, Sidgwick Site User Representatives, and the Press Office. The web site explains the University’s development proposals in manner suited to readers with no building industry knowledge and offers an opportunity for consultative feedback. It is publicly available on the web at http:// www.cam.ac.uk/building.
keywords	Architecture, Urban Planning, Consultation Website, Masterplan
series	ACADIA
email
last changed	2022/06/07 07:56

_id	caadria2003_b3-1
id	caadria2003_b3-1
authors	Stipech, Alfredo and Morahan, Thomas
year	2003
title	Digital Media Its Incorporation into the Education of Architects and Graphic Designers
doi	https://doi.org/10.52842/conf.caadria.2003.397
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 397-410
summary	Here we introduce a pedagogic experience in the Universidad Nacional del Litoral, Santa Fe, Argentina. It has begun about ten years ago, with the first intents of incorporating the computer into the design and teaching process , until current days with the setting of a Class for Introduction to Digital Media (IMD), as an obligatory subject in the first course of careers such as Architecture and Urbanism (AU) and Graphic Design of Visual Communication (DGCV). The introduction of "Computing Science" in this university resembled the process of other Universities (Pentill‰ Hannu, 2001), Today we can see that this was not adjusted to the necessities of these professions neither in the educational process nor in the professional production. In our case we will address particular experiences that enabled us to evolve in a pedagogic model towards the concept of Digital Media (DM) that we currently practice.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	6a02
id	6a02
authors	Tan, Beng-Kiang
year	2001
title	Visualizing Building Occupancy Pattern on Campus
doi	https://doi.org/10.52842/conf.acadia.2001.398
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 398-404
summary	This paper addresses the problem of information opacity that planners and university administrators have when they have multiple sets of data that are not interconnected and how these data can be visualized. The visualization of building occupancy pattern on campus is used as an example to illustrate how this general problem can be addressed through a database driven effective visualization that supports decision-making. This paper proposes a solution using web-based 3D Virtual Reality Modeling Language (VRML) animation dynamically generated from a database and describes a prototype in progress. The prototype displays a broad overview of building occupancy patterns across campus through 3D animation of occupancy over time. From the overview, users can navigate further to find out the details of occupancy throughout the day for specific buildings on campus.
keywords	Visualization, VRML, Animation, Campus Population, Information Visualization
series	ACADIA
email
last changed	2022/06/07 07:56

_id	5da8
authors	Tokman, Leyla Y.
year	2001
title	Collaborative e-Design
source	DCNET'2000: Design Computing on the Net'2000, Organized by Key Centre of Design Computing and Cognition, University of Sydney ve the International Journal of Design Computing
summary	In early 1900’s, successful architects who have a strong influencewith not only their ideas on architecture but also their own work gave desk criticism ‘the form of one-on-one conversation’ in their atelier or studio. Being in these studios was a big opportunity for limited number of accepted students. The architectural education in the first half of 1900’s has many other parallels to education from the other professions. Developments in computer technology have been created a new medium in architectural design and education since 1960’s. Today, Computer technology and communication technology together (Information Technology- IT) help architects and students communicate ideas. This is a big opportunity for architecture candidates in 1990’s comparing with the candidates in 1900âs. One of the main changes is desk criticism from ‘the form of one-on-one conversation’ to ‘the form of multiple consultants’. That means today, not only students but also professionals can develop projects together with any adviser/ partner at any time and at any place where IT can be accessible. Moreover, This collaboration for synchronous - asynchronous studies in virtual environments also brings the equal opportunity to the students from not only developed countries but also developing countries. Students and professionals can share and enhance different ideas, progression of design decisions in educational view and practice view. In this study, some experiences will be shared on design computing and also some new visions/ conceptual models of design computing in collaborative environments will be offered.
keywords	Collaborative Design, Computing, Information Technology, Participation, Opportunity, Network, Team Design
series	journal paper
email
more	http://www.arch.usyd.EDU.AU/kcdc/journal/vol3/dcnet/tokman
last changed	2003/05/15 21:45

_id	a46a
authors	Tsou, J.-Y., Lam, S. and Hall, T.W.
year	2001
title	Integrating Scientific Visualization with Studio Education – Developing Design Options by Applying CFD
doi	https://doi.org/10.52842/conf.acadia.2001.302
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 302-310
summary	To meet the urgent need of education in environmentally responsive architecture, the Architecture Department of The Chinese University of Hong Kong has organized lectures and studios to provide students with knowledge and hands-on experience in environmental design strategies. Considering the context of Hong Kong with a hot-humid sub-tropical climate and hyper-dense urban environment, the current approach in the design studio education has been mainly based on intuition with very limited supports in terms of technical know-how and scientific evidence. Many students of architecture tend to follow established paradigms that have evolved through experience with similar projects. In this paper, we report the research findings of a pilot study that applied advanced scientific simulation skills in studio education designed to help students explore environmental design strategies during early stages of project design development.
keywords	Scientific Visualization, Studio Education, Computer-Aided Architectural Design
series	ACADIA
email
last changed	2022/06/07 07:57

For more results click below: