Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 716

Reformat results as: short short into frame detailed detailed into frame

_id	bb5f
authors	Ahmad Rafi, M.E. and Mohd Fazidin, J.
year	2001
title	Creating a City Administration System (CAS) using Virtual Reality in an Immersive Collaborative Environment (ICE)
doi	https://doi.org/10.52842/conf.ecaade.2001.449
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 449-453
summary	Current problems in administration of a city are found to be decentralized and noninteractive for an effective city management. This usually will result in inconsistencies of decision-making, inefficient services and slow response to a particular action. City administration often spends more money, time and human resource because of these problems. This research demonstrates our research and development of creating a City Administration System (CAS) to solve the problems stated above. The task of the system is to use information, multimedia and graphical technologies to form a database in which the city administrators can monitor, understand and manage an entire city from a central location. The key technology behind the success of the overall system uses virtual reality and immersive collaborative environment (ICE). This system employs emerging computer based real-time interactive technologies that are expected to ensure effective decisionmaking process, improved communication, and collaboration, error reduction, (Rafi and Karboulonis, 2000) between multi disciplinary users and approaches. This multi perspective approach allows planners, engineers, urban designers, architects, local authorities, environmentalists and general public to search, understand, process and anticipate the impact of a particular situation in the new city. It is hoped that the CAS will benefit city administrators to give them a tool that gives them the ability to understand, plan, and manage the business of running the city.
keywords	City Administration System (CAS), Virtual Reality, Immersive Collaborative Environment (ICE), Database
series	eCAADe
email
last changed	2022/06/07 07:54

_id	668b
authors	Heylighen, Ann
year	2001
title	End, means and method - Three roles of design(ing) technology in design research
source	Digital Creativity, Volume 12, No. 2, 2001 (ISSN 1462-6268), pp. 103-105
summary	This article explores an approach to design research in which the development of design technology plays a key role. It presents the author's Ph.D. research on the role of cases in architectural design. The research aimed at investigating the applicability of Case-Based Design (CBD) to the domain of architecture. To this end, the author adopted and confronted different stakeholder perspectives, one of which is that of CBD technology developer. By consequence, a considerable part of the research covers the design, implementation and evaluation of a CBD tool to support architects/designers. The research did not have a strictly instrumental aim, but wanted to provide insights for the field of architectural design on both a theoretical and a technological level. While the tool itself aimed at providing architects with valuable design support, making the tool was used as a method to develop a better understanding of current CBD technology. Moreover, the resulting tool turned out to be an effective means to examine the role and impact of cases in architectural design. Rather than reporting on the outcome of the research, the main objective of the article is to make a methodological reflection on the possibilities and limitations of this approach.
keywords	Design Research, Architectural Design, CAAD, Case-Based Design
series	journal paper
email
last changed	2002/11/14 08:38

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_21
id	avocaad_2001_21
authors	Martijn Stellingwerff
year	2001
title	Visual Cues in the CYBER-REAL Complex
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Current Computer Aided Architectural Design deals with issues of complexity in creation and interpretation of the built environment, complexity of the computer systems and complexity of the representations of the design object. The term ‘CYBER-REAL Complex’ in this paper is defined as the whole (un)conscious state of the architectural design project in the heads of the design-group and as how it is maintained in CAAD systems. The ‘CYBER-REAL Complex’ contains the design, its context and all related information such as planning, product specifications and design ideas. An Intranet is an interesting means for storage and approach of such complex project-data. However the knowledge and data of the project participants remains in their heads and new methods have to be developed in order to get each participant to share his or her personal information about the project. Meetings and intense data retrieval by an Intranet can establish a useful ‘CYBER-REAL Complex’. Then, as a designer wants to approach and change the information in the ‘CYBER-REAL Complex’, a very good set of tools, methods and media has to be at hand. The complexity of all the information can be overwhelming and it can take much effort to re-understand and re-interpret the information before new decisions and design-steps can be made. Currently, the understanding of CAAD representations by the designer and the deliberate execution of operations on increasingly complex datasets through increasingly complex user interfaces takes too much time and effort. An enhanced way of representation in the ‘CYBER-REAL Complex’ could help the approach and understanding of the information. Therefore the visual language of information systems needs further research and development. This paper explores several limits of human perception and ways to adhere to the human way of visual thinking in order to find and add new visual cues in CAAD, VR interfaces and in the ‘CYBER-REAL Complex’ as a whole. Successively the perceptive aspects of complex information, the role of visual cues in complex information and several examples of visual cues in research tests are presented. The paper draws from knowledge of the Gestalt Theory, Perception Research and findings of a PhD research project about Visual Language for Context Related Architectural Design. Findings of this research show that designers use distinct views to get overview and insight in the project data and that different kinds of data representation are needed for different phases in the design process. Finally it showed that abstract represented and filtered information can be very useful for remaining focus in the otherwise overwhelming dataset.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	00f7
authors	Smith, Gregory J and Gero, John S
year	2001
title	Situated design interpretation using a configuration of actor capabilities
doi	https://doi.org/10.52842/conf.caadria.2001.015
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 15-24
summary	A designer looking at a drawing sometimes notices things not originally intended. Conversely, not all implications of a design action are considered before each depiction action is taken. This paper describes an approach to understanding and reproducing this behaviour based on a situated interaction with an external representation.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	avocaad_2001_05
id	avocaad_2001_05
authors	Alexander Koutamanis
year	2001
title	Analysis and the descriptive approach
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The rise of consciousness concerning the quality of working and living conditions has been a permanent though frequently underplayed theme in architecture and building since the reconstruction period. It has led to an explosive growth of programmatic requirements on building behaviour and performance, thus also stimulating the development of design analysis. The first stage of development was characterized by the evolution of prescriptive systems. These reversed the structure of pre-existing proscriptive systems into sequences of known steps that should be taken in order to achieve adequate results. Prescriptive systems complemented rather than replaced proscriptive ones, thereby creating an uncertain mixture of orthodoxy and orthopraxy that failed to provide design guidance for improving design performance and quality.The second stage in the development of design analysis focuses on descriptive methods and techniques for analyzing and supporting evaluation. Technologies such as simulation and scientific visualization are employed so as to produce detailed, accurate and reliable projections of building behaviour and performance. These projections can be correlated into a comprehensive and coherent description of a building using representations of form as information carriers. In these representations feedback and interaction assume a visual character that fits both design attitudes and lay perception of the built environment, but on the basis of a quantitative background that justifies, verifies and refines design actions. Descriptive analysis is currently the most promising direction for confronting and resolving design complexity. It provides the designer with useful insights into the causes and effects of various design problems but frequently comes short of providing clear design guidance for two main reasons: (1) it adds substantial amounts of information to the already unmanageable loads the designer must handle, and (2) it may provide incoherent cues for the further development of a design. Consequently the descriptive approach to analysis is always in danger of been supplanted by abstract decision making.One way of providing the desired design guidance is to complement the connection of descriptive analyses to representations of form (and from there to synthesis) with two interface components. The first is a memory component, implemented as case-bases of precedent designs. These designs encapsulate integrated design information that can be matched to the design in hand in terms of form, function and performance. Comparison between precedents with a known performance and a new design facilitate identification of design aspects that need be improved, as well as of wider formal and functional consequences. The second component is an adaptive generative system capable of guiding exploration of these aspects, both in the precedents and the new design. The aim of this system is to provide feedback from analysis to synthesis. By exploring the scope of the analysis and the applicability of the conclusions to more designs, the designer generates a coherent and consistent collection of partial solutions that explore a relevant solution space. Development of the first component, the design case-bases, is no trivial task. Transformability in the representation of cases and flexible classification in a database are critical to the identification and treatment of a design aspect. Nevertheless, the state of the art in case-based reasoning and the extensive corpus of analysed designs provide the essential building blocks. The second component, the adaptive generative system, poses more questions. Existing generative techniques do not possess the necessary richness or multidimensionality. Moreover, it is imperative that the designer plays a more active role in the control of the process than merely tweaking local variables. At the same time, the system should prevent that redesigning degenerates into a blind trial-and-error enumeration of possibilities. Guided empirical design research arguably provides the means for the evolutionary development of the second component.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ga0118
id	ga0118
authors	Annunziato, Mauro and Pierucci, Piero
year	2001
title	Learning and Contamination in Virtual Worlds
source	International Conference on Generative Art
summary	The most recent advances of artificial life scientific research are opening up a new frontier: the creation of simulated life environments populated by autonomous agents. In these environments artificial beings can interact, reproduce and evolve [4, 6, 15], and can be seen as laboratories whereto explore the emergence of social behaviors like competition, cooperation, relationships and communication [5, 7] . It is still not possible to approach a reasonable simulation of the incredible complexity of human or animal societies, but these environments can be used as a scientific orartistic tool to explore some basic aspects of the evolution [1, 2, 3, 9, 10, 11, 12, 13, 14]. The combination of these concepts with robotics technology or with immersive-interactive 3D environments (virtual reality) are changing quickly well known paradigms like digital life, manmachineinterface, virtual world. The virtual world metaphor becomes interesting when the artificial beings can develop some form of learning, increasing their performances, adaptation, and developing the ability to exchange information with human visitors. In this sense the evolution enhances the creative power and meaningful of these environments, and human visitors experience an emotion of a shift from a simplified simulation of the reality to a real immersion into an imaginary life. We may think that these realization are the first sparks of a new form of life: simulated for the soft-alife thinkers, real for the hard-alife thinkers, or a simple imaginary vision for the artists.
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:15

_id	caadria2010_043
id	caadria2010_043
authors	Barker, Tom and M. Hank Haeusler
year	2010
title	Urban digital media: facilitating the intersection between science, the arts and culture in the arena of technology and building
doi	https://doi.org/10.52842/conf.caadria.2010.457
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 457-466
summary	The research presented in this paper investigates ways of providing better design applications for technologies in the field of Urban Digital Media (UDM). The work takes an emergent approach, evolving a design strategy through the early engagement of stakeholders. The paper discusses research in a design-led creative intersection between media technology, culture and the arts in the built environment. The case study discusses opportunities for the enhancement of a university campus experience, learning culture and community, through the provision of an integrated digital presence within campus architecture and urban spaces. It considers types of information architecture (Manovich, 2001) and designs for use in urban settings to create communication-rich, advanced and interactive designed spaces (Haeusler, 2009). The presented research investigates how to create a strategy for display technologies and networked communications to transform and augment the constructed reality of the built environment, allowing new formats of media activity.
keywords	Urban design; outdoor digital media; information architecture; multidisciplinary design; augmented reality; media facades
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	1b10
id	1b10
authors	Bay, Joo-Hwa
year	2001
title	Cognitive Biases - The case of tropical architecture
source	Delft University of Technology
summary	This dissertation investigates, i) How cognitive biases (or illusions) may lead to errors in design thinking, ii) Why architects use architectural precedents as heuristics despite such possible errors, and iii) Develops a design tool that can overcome this type of errors through the introduction of a rebuttal mechanism. The mechanism controls biases and improves accuracy in architectural thinking. // The research method applied is interdisciplinary. It employs knowledge from cognitive science, environmental engineering, and architectural theory. The case study approach is also used. The investigation is made in the case of tropical architecture. The investigation of architectural biases draws from work by A. Tversky and D. Kahneman in 1982 on “Heuristics and biases”. According to Tversky and Kahneman, the use of heuristics of representativeness (based on similarity) and availability (based on ease of recall and imaginability) for judgement of probability can result in cognitive biases of illusions of validity and biases due to imaginability respectively. This theory can be used analogically to understand how errors arise in the judgement of environmental behaviour anticipated from various spatial configurations, leading to designs with dysfunctional performances when built. Incomplete information, limited time, and human mental resources make design thinking in practice difficult and impossible to solve. It is not possible to analyse all possible alternative solutions, multiple contingencies, and multiple conflicting demands, as doing so will lead to combinatorial explosion. One of the ways to cope with the difficult design problem is to use precedents as heuristic devices, as shortcuts in design thinking, and at the risk of errors. This is done with analogical, pre-parametric, and qualitative means of thinking, without quantitative calculations. Heuristics can be efficient and reasonably effective, but may not always be good enough or even correct, because they can have associated cognitive biases that lead to errors. Several debiasing strategies are discussed, and one possibility is to introduce a rebuttal mechanism to refocus the designer’s thinking on the negative and opposite outcomes in his judgements, in order to debias these illusions. The research is carried out within the framework of design theory developed by the Design Knowledge System Research Centre, TUDelft. This strategy is tested with an experiment. The results show that the introduction of a rebuttal mechanism can debias and improve design judgements substantially in environmental control. The tool developed has possible applications in design practice and education, and in particular, in the designing of sustainable environments.
keywords	Design bias; Design knowledge; Design rebuttal; Design Precedent; Pre-parametric design; Tropical architecture; Sustainability
series	thesis:PhD
type	normal paper
email
last changed	2006/05/28 07:42

_id	b0be
authors	Chien, Sheng-Fen
year	2001
title	Ensuring Usability of CAAD Systems. A Hybrid Approach
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 361-374
summary	Many CAAD software prototypes today are developed with the aim to bring research results closer to practice. This paper describes a hybrid approach that integrates an Object-Oriented Software Engineering (OOSE) methodology with a usability analysis methodology—GOMS. This approach is examined through two case studies and has shown promising results. It enables CAAD system developers to be aware of usability issues and conduct usability evaluation as early as the analysis phase of the software development process. Consequently, this may improve the quality of CAAD software systems as well as ensure the usability of the systems.
keywords	Usability Evaluation, GOMS Analysis, Usability Engineering, Object-Oriented Software Engineering
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	8a8c
authors	Choi, J.W., Kwon, D.-Y. and Lee, H.-S.
year	2001
title	DesignBUF: Exploring and Extending 2D Boolean Set Operations with Multiple Modes in the Early Design Phase
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 589-602
summary	Boolean set operations have been a powerful design function set for any CAD systems including 2D and 3D domains. Their capacity to provide even more powerful design tools have not, however, been fully explored in the 2D system. The purpose of this study is to further explore 2D Boolean set operations with multiple modes, which include a pick mode, a wait mode, a drag-and-drop mode, and a draw-and-action mode. We develop a prototype design tool, called DesignBUF. It introduces a new concept of “design object buffer,” an intermediate design zone in which a designer freely sketches his/her design with design objects in a brainstorming fashion since valuable design ideas are ephemeral? and the designer needs to generate design schemes rapidly before the ideas disappear or are forgotten. After finishing such fast brainstorming processes, especially in the early design phase, the designer gets a stable and refined form of a floor plan, which in turn becomes a well structured form to maintain building and design information systematically. Therefore, the designer keeps switching back and forth between the “design object buffer” and structured floor plans. We believe that this dual working memory will not only increase system flexibility, but also reduce computation with unnecessarily complex design objects. This study also develops a robust algorithm to transform the intermediate design objects into a well-structured floor plan. In fact, the algorithm is also used for the extended Boolean set operations described above. A structured floor plan can also be transformed into non-structured forms. Research issues for future development are also identified at the end of the paper.
keywords	Design Buffer, Extended Boolean Set Operations, Structured Floor Plan.
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	1e3b
authors	Crowe, Malcolm and Kydd, Sandy
year	2001
title	Agents and suggestions in a Web-based dynamic workflow model
source	Automation in Construction 10 (5) (2001) pp. 639-643
summary	Two features of this dynamic workflow system make it suitable for the use of quasi-intelligent agents: (a) workflow processes need not be fully specified, and so can be non-prescriptive in approach, and (b) a job can be modified independently of the process of which it is an instance, and so some participants may have permissions to change its course. In the architecture that has been chosen for the research, web clients are used, and web agents generate suggestions based on analysis of the process itself, the current job, and the records of previous jobs.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	67fa
authors	Datta, Sambit and Woodbury, Robert F.
year	2001
title	An approach to search and exploration through mixed-initiative
doi	https://doi.org/10.52842/conf.caadria.2001.275
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 275-282
summary	Generative design environments need support for human intervention as well as sound computational formalisms. A systematic approach to integrating the two, formal generation and the exploratory, is lacking. In this paper, we posit the possibility of a design support system that combines formal search with user driven exploration. Our approach is to cast the interaction between the user and the generative formalism as agent collaboration in a mixed-initiative environment. We describe the role of interaction and agency in an experimental mixed-initiative design support system, FOLDS and demonstrate its application.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	be0b
authors	Dokonal, W., Martens, B. and Ploesch, R.
year	2001
title	Continuing work on a 3-d city model for architectural education
doi	https://doi.org/10.52842/conf.caadria.2001.319
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 319-322
summary	This paper describes continuing experiences with the creation of a 3D-City Model at Graz University of Technology. It presents an innovative approach in establishing a city model with the substantial support of students in the study fields of architecture and surveying. Doubtlessly other projects already revealed similar issues, but so far without direct collaborative input by students.
keywords	3D City Modeling
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	7eb9
authors	Dokonal, Wolfgang and Martens, Bob
year	2001
title	A Working Session on 3-D City Modeling
doi	https://doi.org/10.52842/conf.ecaade.2001.417
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 417-422
summary	On the occasion of a presentation on a city model for Graz at the eCAADe-conference in Weimar (2000), some attendees informed us about their previous work in this field and the idea of preparing a working session with collegues involved in 3-D city modeling was born. During the initial phase of research for this eCAADe conference activity it turned out that a large number of city models has been created in the course of time for different reasons resp. purposes. Therefore a rich variety in the production of city models can be noticed. This working session on 3-D city modeling brings together experts focusing on different aspects concerning the creation and use of city models, such as data input, data structure, data storage and data quality. Also the definition of a perspective on the future of 3-D city modeling can be regarded as an important topic. In this paper a rough overview on the different submissions will be presented. Furthermore three blitz statements are incorporated as time was too short to produce a full paper. Both with the individual contributions as with this overview paper it is intended to present a knowledge-base to this working field. Finally, the start for a growing bibliography was made in order to support future work in this area.
keywords	Urban Modeling, 3-D Modeling, Collaboration, City Information, Model Adaptation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	bbfa
authors	Donath, D., Beetz, J., Grether, K., Petzold, F. and Seichter, H.
year	2001
title	Augmented Reality Techniques for Design and Revitalisation in Existing Built Environments
doi	https://doi.org/10.52842/conf.acadia.2001.322
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 322-329
summary	Building activity in Germany is moving increasingly toward combined newbuild and renovation projects. Essential for effective computer-aided planning within an existing context is not only the use of on-site computer-aided measurement tools but also an integrative cooperation between the different disciplines involved via an information and communication system. Interdisciplinary cooperation needs to be tailored to the integrative aspects in renovation and revitalisation work. Economic factors determine the viability of an architectural project, and reliable costing information is vital. Existing IT-approaches to this problem are not yet sufficiently exploited. In ongoing research at our university (collaborative research center ”Materials and Structure in the Revitalisation of Buildings”) methods and techniques of revitalisation are being investigated. A special branch of the collaborative research center is investigating possibilities of computer-aided building measurement and communication platforms for professional disciplines (www.uni-weimar.de/sfb). The aim is to develop a general approach to the revitalisation of buildings. This paper discusses possible application areas of AR/VR techniques in the revitalisation of buildings from the point of view of the user and are based on the real project “Cooling factory Gera”. Based on the necessities of revitalisation projects, technical requirements are developed. The project is funded by the Deutsche Forschungsgesellschaft (DFG).
keywords	Augmented Reality, Architecture, Modernization, Measurement
series	ACADIA
email
last changed	2022/06/07 07:55

_id	6a37
authors	Fowler, Thomas and Muller, Brook
year	2002
title	Physical and Digital Media Strategies For Exploring ‘Imagined’ Realities of Space, Skin and Light
doi	https://doi.org/10.52842/conf.acadia.2002.013
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 13-23
summary	This paper will discuss an unconventional methodology for using physical and digital media strategies ina tightly structured framework for the integration of Environmental Control Systems (ECS) principles intoa third year design studio. An interchangeable use of digital media and physical material enabledarchitectural explorations of rich tactile and luminous engagement.The principles that provide the foundation for integrative strategies between a design studio and buildingtechnology course spring from the Bauhaus tradition where a systematic approach to craftsmanship andvisual perception is emphasized. Focusing particularly on color, light, texture and materials, Josef Albersexplored the assemblage of found objects, transforming these materials into unexpected dynamiccompositions. Moholy-Nagy developed a technique called the photogram or camera-less photograph torecord the temporal movements of light. Wassily Kandinsky developed a method of analytical drawingthat breaks a still life composition into diagrammatic forces to express tension and geometry. Theseschematic diagrams provide a method for students to examine and analyze the implications of elementplacements in space (Bermudez, Neiman 1997). Gyorgy Kepes's Language of Vision provides a primerfor learning basic design principles. Kepes argued that the perception of a visual image needs aprocess of organization. According to Kepes, the experience of an image is "a creative act ofintegration". All of these principles provide the framework for the studio investigation.The quarter started with a series of intense short workshops that used an interchangeable use of digitaland physical media to focus on ECS topics such as day lighting, electric lighting, and skin vocabulary tolead students to consider these components as part of their form-making inspiration.In integrating ECS components with the design studio, an nine-step methodology was established toprovide students with a compelling and tangible framework for design:Examples of student work will be presented for the two times this course was offered (2001/02) to showhow exercises were linked to allow for a clear design progression.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	9bee
authors	Gerzso, J. Michael
year	2001
title	Automatic Generation of Layouts of an Utzon Housing System via the Internet
doi	https://doi.org/10.52842/conf.acadia.2001.202
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 202-211
summary	The article describes how architectural layouts can be automatically generated over the Internet. Instead of using a standard web server sending out HTML pages to browser client, the system described here uses an approach that has become common since 1998, known as three tier client/server applications. The server part of the system contains a layout generator using SPR(s), which stands for “Spatial Production Rule System, String Version”, a standard context- free string grammar. Each sentences of this language represents one valid Utzon house layout. Despite the fact that the system represents rules for laying out Utzon houses grammatically, there are important differences between SPR(s) and shape grammars. The layout generator communicates with Autocad clients by means of an application server, which is analogous to a web server. The point of this project is to demonstrate the idea that many hundreds or thousands of clients can request the generation of all of the Utzon layouts simultaneously over the Internet by the SPR(s) server, but the server never has to keep track when each client requested the generation of all of the layouts, or how many layouts each client has received.
keywords	Internet, Spatial-Production-Rules Grammars, Utzon
series	ACADIA
email
last changed	2022/06/07 07:51

_id	avocaad_2001_06
id	avocaad_2001_06
authors	Giovanni De Paoli
year	2001
title	Architectural design and procedural models - A radical change of language to design in architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The history of architecture and its teaching clearly reveal how representations of the image and drawing have changed over centuries. Today, computers are increasingly found at the desks of architecture professionals and students, but their usage remains restricted to technical functions and what is commonly known as CAD (computer-assisted design), in architecture is often simply the other CAD (computer-assisted drawing).This presentation deals with architectural design, particularly at its earliest stage. Our objective is to propose a model for describing the architectural concept that meets the needs of architects through software. Only then will they really be able to use computers as an aid to design by overcoming the obstacles that presently keep us from making full use of them.This has led me to propose an avenue of exploration that examines projection through an object’s properties, and a method of computer-assisted design that makes use of procedural models. These procedural models consist of geometric operators and operators that define the properties, characteristics and performance of a building — operators which I have termed “semantic”.This research fits into a paradigm that leads to representation of the building through functions that can be called with parameters and encapsuled in an algorithm, making it possible to create procedural models that assist with the design. This approach opens up a means of integrating the logos with the figurative representation where drawing is used instead of words to convey the architectural concept.The example of a procedural model shows how we can use a generic model to produce a volume model with all the characteristics belonging to the same family of objects. This type of model can serve not only to illustrate the result of a process, or to draw connections among buildings on the basis of their construction process, or to test the validity of a rule typical of a set of objects, but also to integrate, through a functional language, semantic operators which to date have been excluded from the initial design phase. This descriptive mechanism is extremely powerful in making it possible to establish relationships among the functions and properties of a building and the purpose of the architectural project.The scientific contribution of this research is to test the hypothesis that we can use computer tools to manipulate operators which enable the architect to reappropriate a complex design of the building, and open up new lines of investigation into integrating geometric and knowledge-based systems into a unified representation. The declarative approach for creating three-dimensional scenes fits into this perspective.It is now a matter of exploring the possibility of working on a “common morphology” shared by everyone involved in the design process by rewriting the functions or by converting the functions used for representation, or else through a functional dialect (language) that allows for dialectic relationships among all types of operators and the actions of the protagonists in the architectural design process.
series	AVOCAAD
email
last changed	2005/09/09 10:48

For more results click below: