Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 711

Reformat results as: short short into frame detailed detailed into frame

_id	3bdb
authors	Hanna, R. and Barber, T.
year	2001
title	An inquiry into computers in design: attitude before-attitudes after
source	Design Studies, 22(3), pp. 255-281
summary	This paper reports on the findings of an empirical investigation into the use of the computer as the only design medium. A group of students took part in an experiment to design a studio for a graphic designer on the computer. Student attitudes towards the design process were assessed at two conditions: before using the computer and after using the computer. Prior to the experiment a literature search was carried out to explore some widely researched design issues such as sketching, design creativity, and computer-aided design. Consequently a number of design variables were identified, developed and then empirically tested. Data collection methods included questionnaires and observations. Statistical analysis of the responses confirms that using the computer has produced a statistically significant difference in attitudes to the design process variables.
series	journal paper
last changed	2003/04/23 15:50

_id	avocaad_2001_05
id	avocaad_2001_05
authors	Alexander Koutamanis
year	2001
title	Analysis and the descriptive approach
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The rise of consciousness concerning the quality of working and living conditions has been a permanent though frequently underplayed theme in architecture and building since the reconstruction period. It has led to an explosive growth of programmatic requirements on building behaviour and performance, thus also stimulating the development of design analysis. The first stage of development was characterized by the evolution of prescriptive systems. These reversed the structure of pre-existing proscriptive systems into sequences of known steps that should be taken in order to achieve adequate results. Prescriptive systems complemented rather than replaced proscriptive ones, thereby creating an uncertain mixture of orthodoxy and orthopraxy that failed to provide design guidance for improving design performance and quality.The second stage in the development of design analysis focuses on descriptive methods and techniques for analyzing and supporting evaluation. Technologies such as simulation and scientific visualization are employed so as to produce detailed, accurate and reliable projections of building behaviour and performance. These projections can be correlated into a comprehensive and coherent description of a building using representations of form as information carriers. In these representations feedback and interaction assume a visual character that fits both design attitudes and lay perception of the built environment, but on the basis of a quantitative background that justifies, verifies and refines design actions. Descriptive analysis is currently the most promising direction for confronting and resolving design complexity. It provides the designer with useful insights into the causes and effects of various design problems but frequently comes short of providing clear design guidance for two main reasons: (1) it adds substantial amounts of information to the already unmanageable loads the designer must handle, and (2) it may provide incoherent cues for the further development of a design. Consequently the descriptive approach to analysis is always in danger of been supplanted by abstract decision making.One way of providing the desired design guidance is to complement the connection of descriptive analyses to representations of form (and from there to synthesis) with two interface components. The first is a memory component, implemented as case-bases of precedent designs. These designs encapsulate integrated design information that can be matched to the design in hand in terms of form, function and performance. Comparison between precedents with a known performance and a new design facilitate identification of design aspects that need be improved, as well as of wider formal and functional consequences. The second component is an adaptive generative system capable of guiding exploration of these aspects, both in the precedents and the new design. The aim of this system is to provide feedback from analysis to synthesis. By exploring the scope of the analysis and the applicability of the conclusions to more designs, the designer generates a coherent and consistent collection of partial solutions that explore a relevant solution space. Development of the first component, the design case-bases, is no trivial task. Transformability in the representation of cases and flexible classification in a database are critical to the identification and treatment of a design aspect. Nevertheless, the state of the art in case-based reasoning and the extensive corpus of analysed designs provide the essential building blocks. The second component, the adaptive generative system, poses more questions. Existing generative techniques do not possess the necessary richness or multidimensionality. Moreover, it is imperative that the designer plays a more active role in the control of the process than merely tweaking local variables. At the same time, the system should prevent that redesigning degenerates into a blind trial-and-error enumeration of possibilities. Guided empirical design research arguably provides the means for the evolutionary development of the second component.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	8a8c
authors	Choi, J.W., Kwon, D.-Y. and Lee, H.-S.
year	2001
title	DesignBUF: Exploring and Extending 2D Boolean Set Operations with Multiple Modes in the Early Design Phase
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 589-602
summary	Boolean set operations have been a powerful design function set for any CAD systems including 2D and 3D domains. Their capacity to provide even more powerful design tools have not, however, been fully explored in the 2D system. The purpose of this study is to further explore 2D Boolean set operations with multiple modes, which include a pick mode, a wait mode, a drag-and-drop mode, and a draw-and-action mode. We develop a prototype design tool, called DesignBUF. It introduces a new concept of “design object buffer,” an intermediate design zone in which a designer freely sketches his/her design with design objects in a brainstorming fashion since valuable design ideas are ephemeral? and the designer needs to generate design schemes rapidly before the ideas disappear or are forgotten. After finishing such fast brainstorming processes, especially in the early design phase, the designer gets a stable and refined form of a floor plan, which in turn becomes a well structured form to maintain building and design information systematically. Therefore, the designer keeps switching back and forth between the “design object buffer” and structured floor plans. We believe that this dual working memory will not only increase system flexibility, but also reduce computation with unnecessarily complex design objects. This study also develops a robust algorithm to transform the intermediate design objects into a well-structured floor plan. In fact, the algorithm is also used for the extended Boolean set operations described above. A structured floor plan can also be transformed into non-structured forms. Research issues for future development are also identified at the end of the paper.
keywords	Design Buffer, Extended Boolean Set Operations, Structured Floor Plan.
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	avocaad_2001_15
id	avocaad_2001_15
authors	Henri Achten, Jos van Leeuwen
year	2001
title	Scheming and Plotting your Way into Architectural Complexity
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The problem of complexity underlies all design problems. With the advent of CAD however, our ability to truly represent complexity has increased considerably. Following the four waves of design methodology as distinguished by Cross (1984), we see changing architectural design attitudes with respect to complexity. Rather than viewing it as problematic issue, designers such as Koolhaas, van Berkel, Lynn, and Franke embrace complexity and make it a focus in their design work. The computer is an indispensable instrument in this approach. The paper discusses the current state of the art in architectural design positions on complexity and CAAD, and reflects in particular on the role of design representations in this discussion. It is advanced that a number of recent developments are based on an intensified use of design representations such as schema’s, diagrams, and interactive modelling techniques. Within the field of possibilities in this field, the authors discuss Feature-Based Modelling (FBM) as a formalism to represent knowledge of the design. It is demonstrated how the FBM approach can be used to describe graphic representations as used in design, and how other levels and kinds of design knowledge can be incorporated, in particular the less definite qualitative information in the early design phase. The discussion section concludes with an extrapolation of the current role of design representation in the design process, and advances a few positions on the advantage and disadvantage of this role in architectural design.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	bfc8
authors	Fukai, Dennis and Srinivasan, Ravi
year	2001
title	PCIS Revisited: A Visual Database for Design and Construction
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 372-379
doi	https://doi.org/10.52842/conf.acadia.2001.372
summary	This paper presents research on a piece-based construction information system called PCIS(pronounced “pieces”) first published as a visual information concept at ACADIA’96, Tucson. After more than five years of development it has evolved into a multidimensional visual information system for design and construction. It includes a piece-based anatomical construction model layered according to a work breakdown structure; a dataTheater that surrounds the model as an index to plans, elevations, sections, and details; and a dataWorld with cameras fixed to the intersections of its latitudes and longitudes to add context and perspective. A standard services matrix (SSM) controls layer visibility and camera settings. PCIS can be “played” to access archived resources; support design development, analyze and resolve preconstruction conflicts, and coordinate construction activities. Current research will be used to demonstrate how PCIS might be valuable to increase the potential for technical cooperation, collaboration, and communication by literally aligning the points of view of architectural, engineering, and construction methodology.
keywords	Construction, Pictorial, 3D/4D, Modeling, Database
series	ACADIA
email
last changed	2022/06/07 07:50

_id	caadria2003_b6-1
id	caadria2003_b6-1
authors	Howe, A.S., Kang, P. and Nasari, Omid
year	2003
title	Digiosk Digital Design to Robotic Deployment in Two Months
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 811-826
doi	https://doi.org/10.52842/conf.caadria.2003.811
summary	In this paper, we discuss Kit-of-parts Theory and how it applies to the design, manufacture, and operation of a small robotic deployable demonstration structure called the Digiosk (Howe, 2001). "Kit-of-parts Theory" refers to the study and application of objectoriented building techniques, where building components are predesigned / pre-engineered / pre-fabricated for inclusion in joint-based (linear element), panel-based (planar element), module-based (solid element), and deployable (time element) construction systems. The Digiosk is an exposition display kiosk that was designed and manufactured digitally, and brought from concept to robotic functionality in a short period of time. Using kinematic mechanisms the cylinder opens up and deploys into a 2.7m cubical display booth complete with integral power and network connections. The kiosk was designed using a solid modeler, from which data was extracted to drive digital manufacturing processes. Owing to the well-developed understanding of Kit-of-parts Theory and the new "kinematic architecture" principles, the paperless process yielded a working prototype only eight weeks after initial conceptualization. The paper concludes with a discussion of how these concepts can be applied to large-scale projects and design processes.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	6795
id	6795
authors	KOUZELEAS Stelios
year	2005
title	DEFINITION OF A METHOD OF LIMITS OF THE SIMPLIFICATION OF A HALL MODEL IN A CAD SYSTEM TO DIMINISH FALSIFICATION OF ACOUSTIC SIMULATION RESULTS
source	International Congress eCAADe 2005 (Education and research in Computer Aided Architectural Design in Europe), subject : “Digital Desing : the quest for new paradigms”, ISBN 0-9541183-2-4, pp. 695-704, Technical University of Lisbon, Portugal, 21-24 September 2005
summary	During the modelling, because of the sometimes complex architectural shape of halls, we were forced to introduce simplifications in order to carry out calculations and simulation operations on these halls, as the calculation software requires plane surfaces. This paper presents a developed tool adapted on a CAD modelling system (AutoCAD), which defines an “average limits” of the model simplification operation in order to control and diminish the falsification of calculation and simulation results on this model, such as the architectural acoustic simulation. The process of the elaboration and the adjustment of the simplified models of the Grand Theatre of Bordeaux (GTB) based on acoustical measurements and their calculation results are described in detail in a previous article (Kouzeleas and Semidor, 2001). The analysis process of the consequences of the hall model simplification on the acoustical simulation results and the applied simplification methods are described in a PhD thesis (Kouzeleas, 2002). This article is based on this analysis process in order to apply it on several simplified models of the Amphitheatre of the Architecture School of Bordeaux (Amphi-EAPB). The comparison in a CAD system (AutoCAD) of the acoustical calculation results and the areas after simplification of the simplified models of these two halls made with AutoCAD, via the developed tool adapted on the AutoCAD, permit to define a “limits average of a hall model simplification” before the falsification of these calculation results.
series	other
type	normal paper
email
more	http://www.civil.ist.utl.pt/ecaade05/
last changed	2005/10/25 12:19

_id	avocaad_2001_07
id	avocaad_2001_07
authors	Stefan Wrona, Adam Gorczyca
year	2001
title	Complexity in Architecture - How CAAD can be involved to Deal with it. - "Duality"
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	“Complexity “ is for us a very ambigous notion. It may be understood in two contexts.1.Thorough solution of a problem.Complexity means full recognition of design area, followed by appropriate work. That work must be thorough and interdisciplinary – if necessary, separated to different co-operatives. These trade designers reqiure a branch coordination and – the most important- all of them must have a „common denominator”. Such as a proper CAAD platform and office standards. That will reduce costs of changes, improve an interplay between designers and somtimes enable to face up a new challenge.Nowadays architects are no longer “solitary” individualists working alone – they must concern a team – they become a member, a part of a huge design machine. “Import/export”, compatibility, interplay – these words must appear and we have to put a stress on them. How to organize work for different trade-designers? How to join in common database architectural design ,engineering design, HVAC design, electricity design, technology design, computer network design and all other trades ?...A key to solve this range of problems is in good work organization. Universal prescription does not exist, but some evergreen rules can be observed. We are going to present a scheme of work in CAAD application ALLPLAN FT v.16 with a Group manager , which starts to conquest polish market and is widely spread in Germany. “Golden rules” of ALLPLAN FT There is one database – it is placed on server. It includes all projects. There is a well-developed office standard. It must be created at the beginning of collaboration, although it is possible to improve it later. It consist of hatches, fonts, symbols, macros, materials, pen-widths, and – the most important –layers . A layer set – predefined structure divided into functional groups – e.g. drafting, text, dimensioning, architecture, HVAC, engineering, urban design, etc.That stucture is a part of an office standard – all workers use a relevant part of it. No name duplicates, no misunderstandings... If however design extends, and a new group of layers is required, it can be easily added, e.g. computer networks, fireguard systems. Administrator of ALLPLAN network defines different users and gives them different permitions of access. For example – an electrician will be able to draft on layer “electricity”, but he won’t modify anything at layer “architecture – walls”, and he won’t even see a layer “engineering- slabs”, because he doesn’t need it..At the same time our electrician will be able to see , how architect moves some walls and how HVAC moved and started to cross with his wires. Every user is able to see relevant changes, after they are saved by author. Two different users can not access at the same time the same file. That excludes inconsistent or overlapping changes . All users operate on a 3D model. While putting some data into a model, they must remember about a “Z” coordinate at work-storey. But at the same time all create a fully-integrated, synchronous database, which can be used later for bills of quantities, specifications, and – of course – for visuaisation. That method can be described as “model-centric”. To simplify complex structure of architectural object -ALLPLAN offers files. Usually one file means one storey, but at special designs it might become a functional part of a storey, or whatever you wish. Files connected with layers easy enable to separate certain structural elements, e.g. if we want to glance only at concrete slabs and columns in the building – we will turn on all files with “layer filter” – “slabs” and “columns”. ALLPLAN is of course one of possible solutions. We described it , because we use it in our workshop. It seems to be stretchy enough to face up every demand and ever-increasing complexity of current projects. The essence of the matter, however, is not a name or version of application – it is a set of features, we mentioned above, which allows to deal with EVERY project. The number of solutions is infinite.2. Increasing difficulties during design process. It may be associated with more and more installations inside of new buildings, especially some “high-tech” examples. The number of these installations increases as well as their complexity. Now buildings are full of sensors, video-screens, computer networks, safety-guard systems... Difficulties are connected with some trends in contemporary architecture, for example an organic architecture, which conceives “morphed” shapes, “moving” surfaces, “soft” solids. This direction is specially supported by modelling or CAD applications. Sometimes it is good – they allow to realize all imaginations, but often they lead to produce “unbuildable” forms, which can exist only in virtual world.Obstacles appear, when we design huge cubatures with “dense” functional scheme. Multi-purposed objects, exhibition halls, olimpic stadium at Sydney – all of them have to be stretchy, even if it requires sliding thousands pound concrete blocks! Requirements were never so high.The last reason, why designs become so complex is obvious - intensifying changes due to specific requirements of clients/developers.We could say “ signum tempori” – everything gets more and more complicated , people have to become specialists, to face up new technology. But how CAAD can help us with it? How?! We have already answered that question. Sometimes CAAD is the only way to imagine and sketch something, to visualize something, to compute a construction , to prepare a simulation... So that human must “only” interprete ready solutions. Sometimes CAAD help us to notify a problem. It works exactly in the same way, as spy-glasses does. For example – without a real-time visualization we we would have never realised (until finished!) some strange interference of solids, which have occured in the upper roof part of our new appartment-house.ConclusionsTemporary CAAD is an integral part of design process – not only as a tool, but sometimes as an inspiration. It helps to organize our work, to define problems, to filter relevant elements and to render our visions. It becomes an integral part of our senses – and that will be a real complexity in architecture...
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	68f0
id	68f0
authors	Talbott K, Snyder G and Dicker J
year	2006
title	Design + Virtual Modeling: Course Integration on a Large Scale
source	Marjanovic I and Robinson C (eds) Intersections: Design Education and Other Fields of Inquiry, Proceedings of the 22nd National Conference on the Beginning Design Student, Ames, Iowa, April 2006, 309-313
summary	Starting in 2001 a group of faculty at the University of Wisconsin – Milwaukee School of Architecture and Urban Planning undertook a three year effort to integrate introductory studio with introductory computer-aided design. Each year 160 incoming sophomores begin their first design studio. They also receive a laptop computer and begin concurrent enrollment in an introductory computer course entitled Virtual Modeling. Students participate in studio projects, computer assignments, hand drawing tutorials, computer tutorials, studio course lectures and computer course lectures. This takes the dedicated effort of four faculty members and five graduate teaching assistants. The goals of this paper are 1) to describe the evolution of this large-scale integration effort, 2) to identify key success factors, and 3) to describe the impact on our students’ beginning design education. The paper provides a balanced perspective by discussing both benefits and challenges. It begins with more concrete information and moves gradually into deeper issues.
keywords	pedagogy, design studio, collaboration, curriculum
series	other
type	normal paper
email
last changed	2006/08/13 06:49

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_18
id	avocaad_2001_18
authors	Aleksander Asanowicz
year	2001
title	The End of Methodology - Towards New Integration
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The present paper is devoted to the deliberation on the genesis and development of designing from the point of view of the potential use of computers in the process. Moreover, it also presents the great hopes which were connected with the use of the systematic designing methods in the 1960’s, as well as the great disappointment resulting from the lack of concrete results. At this time a great deal of attention was paid to the process of design as a branch of a wider process of problem-solving. Many people believed that the intuitive methods of design traditionally used by architects were incapable of dealing with the complexity of the problems to be solved. Therefore, the basic problem was the definition of a vertical structure of the designing process, which would make it possible to optimise each process of architectural design. The studies of design methodology directed at the codification of the norms of actions have not brought about any solutions which could be commonly accepted, as the efforts to present the designing process as a formally logical one and one that is not internally “uncontrary” from the mathematical point of view, were doomed to fail. Moreover, the difficulties connected with the use of the computer in designing were caused by the lack of a graphic interface, which is so very characteristic of an architect’s workshop. In result, the methodology ceased to be the main area of the architect’s interest and efforts were focused on facilitating the method of the designer’s communication with the computer. New tools were created, which enabled both the automatic generation of diversity and the creation of forms on the basis of genetic algorithms, as well as the presentation of the obtained results in the form of rendering, animation and VRML. This was the end of the general methodology of designing and the beginning of a number of methods solving the partial problems of computer-supported design. The present situation can be described with the words of Ian Stewart as a “chaotic run in all directions”. An immediate need for new integration is felt. Cyber-real space could be a solution to the problem. C-R-S is not a virtual reality understood as an unreal world. Whilst VR could be indeed treated as a sort of an illusion, C-R-S is a much more realistic being, defining the area in which the creative activities are taking place. The architect gains the possibility of having a direct contact with the form he or she is creating. Direct design enables one to creatively use the computer technology in the designing process. The intelligent system of recognising speech, integrated with the system of virtual reality, will allow to create an environment for the designer – computer communication which will be most natural to the person. The elimination of this obstacle will facilitate the integration of the new methods into one designing environment. The theoretical assumptions of such an environment are described in the present paper.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_13
id	avocaad_2001_13
authors	Alexander Koutamanis
year	2001
title	Modeling irregular and complex forms
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Computational technologies provide arguably the first real opportunity architectural design has had for a comprehensive description of built form. With the advent of affordable computer-aided design systems (including drafting, modeling, visualization and simulation tools), architects believe they can be in full control of geometric aspects and, through these, of a wide spectrum of other aspects that are implicit or explicit in the geometric representation. This belief is based primarily on the efficiency and effectiveness of computer systems, ranging from the richness and adaptability of geometric primitives to the utility of geometric representations in simulations of climatic aspects. Such capabilities support attempts to design and construct more irregular or otherwise complex forms. These fall under two main categories: (1) parsing of irregularity into elementary components, and (2) correlation of the form of a building with complex geometric structures.The first category takes advantage of the compactness and flexibility of computational representations in order to analyse the form of a design into basic elements, usually elementary geometric primitives. These are either arranged into simple, unconstrained configurations or related to each other by relationships that define e.g. parametric relative positioning or Boolean combinations. In both cases the result is a reduction of local complexity and an increase of implicit or explicit relationships, including the possibility of hierarchical structures.The second category attempts to correlate built form with constraints that derive usually from construction but can also be morphological. The correlation determines the applicability of complex geometric structures (minimally ruled surfaces) to the description of a design. The product of this application is generally variable in quality, depending upon the designer's grounding in geometry and his ability to integrate constraints from different aspects in the definition of the design's geometry.Both categories represent a potential leap forward but are also equally hampered by the rigidity of the implementation mechanisms upon which they rely heavily. The paper proposes an approach to making these mechanisms subordinate to the cognitive and technical aspects of architectural thinking through fuzzy modeling. This way of modeling involves a combination of (a) canonical forms, (b) tolerances around canonical forms and positions, (c) minimal and maximal values, (d) fuzzy boundaries, and (e) plastic interaction between elements based on the dual principles of local intelligence and autonomy. Fuzzy models come therefore closer to the intuitive manners of sketching, while facilitating transition to precise and complex forms. The paper presents two applications of fuzzy modeling. The first concerns the generation of schematic building layouts, including adaptive control of programmatic requirements. The second is a system for designing stairs that can adapt themselves to changes in their immediate environment through a fuzzy definition of geometric and topological parametrization.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	7501
authors	Apley, Julie
year	2001
title	A Virtual Reconstruction: Isthmia Roman Bath
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 410-411
doi	https://doi.org/10.52842/conf.acadia.2001.410
summary	The Isthmia Roman Bath is located in Greece overlooking a great ravine on the Isthmus of Corinth. It was in use during the 2nd through the 4th centuries. I have created a 3D VRML walkthrough of the ancient bath. This interdisciplinary project utilizes the research of an archaeologist, architect, and art historian. Because the researchers live in different locations, it made sense to use the Internet as a research tool. When clicking on the numbers on the home page, you can see the process that I went through to model the Roman Bath. After seeing the images, the researchers were able to visualize their research, reply to questions, and re-evaluate their findings. VRML promises an accessible, highly visual, and interactive representation of difficult to see data, opening up new ways of presenting research. It is possible to walk within the bath by clicking on the Virtual Reconstruction link. When in the "Entrance view", click on the vase to see a map of the ruin. There are three places within the project that link to the existing excavated site. Links are also available to walk outside. The project runs best on Windows NT using Netscape. You must have the plug-ins for Cosmoplayer (VRML) and Quicktime (movie). Because the VRML plug-in doesn't work as well on a Mac, it is possible that you may only be able to view the images and movie from the project.
series	ACADIA
last changed	2022/06/07 07:55

_id	22ec
authors	Bechthold, Martin
year	2001
title	Complex shapes in wood: Computer-aided design and manufacture of wood-sandwich roof shells
source	Harvard University
summary	Computer-Aided-Design, Engineering and Manufacturing (CAD/CAE/CAM) technology has changed the way consumer products, automobiles or airplanes are designed and made. The emerging applications for CAD/CAE/CAM technology in architecture, and the way this technology impacts how we design and construct the built environment, are yet unclear. This thesis investigates the relation between advanced digital design tools and the making of physical objects by focusing on an exemplary architectural element—wooden roof shells. The research objective is to expand the scope of architectural design through the application of CAD/CAE/CAM technology rather than to use this technology to streamline existing processes. The thesis develops a specific technical solution that allows the design and manufacture of new types of wooden roof shells. These are complexly shaped multifunctional construction elements that are manufactured off-site. Based on the close connection between digital design tools and the new Computer-Numerically-Controlled manufacturing process the author proposes a theoretical model of shared digital environments for collaborative design in architecture. The proposed manufacturing process treats wood as a modern composite material. Thin wood strips and foams combine into structural sandwich panels that can then be joined into a roof shell. The geometrically complex panels are generated by a combination of subtractive Computer-Numerically-Controlled machining processes and manual work. Infrastructure elements can be embedded into the sandwich build-up in order to enhance the functionality of the roof as a building envelope. Numerical tools are proposed that allow the determination of manufacturing-related parameters in the digital design environment. These inform the architectural and structural design in the early design phases. The digital collaborative design environment is based on a shared parametric solid model and an associated database. This collectively owned, feature-based design model is employed throughout the design and manufacturing process and constitutes the means of concurrent design coordination of all participants. The new manufacturing process for wood/foam sandwich shells is verified by designing and manufacturing prototypes. Design guidelines and a cost estimation are presented as the practical basis for architects and engineers to incorporate new types of roof shells into architectural projects.
keywords	Architecture; Agriculture; Wood Technology; Design and Decorative Arts
series	thesis:PhD
last changed	2003/02/12 22:37

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	avocaad_2001_10
id	avocaad_2001_10
authors	Bige Tunçer, Rudi Stouffs, Sevil Sariyildiz
year	2001
title	Facilitating the complexity of architectural analyses
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	It is common practice for architecture students to collect documents on prominent buildings relevant to their design task in the early stage of design. While practitioners can rely on a body of design experience of their own, during the process of a new design, students can only draw from the examples of success and failure from other architects. In the past, such precedent based learning was implicit in the master-apprentice relationship common in the educational system. Nowadays academics commonly no longer have the possibility to maintain an extensive design practice, and instead introduce important outside precedents to the students. Thus, the study of important historical precedents or designs plays an important role in design instruction and in the students’ design processes. While there is no doubt that the most effective outcome of such a study would be achieved when the student does entire the study herself, students also benefit from a collaboration with peers, where they form groups to do an analysis of various aspects of a same building or over a group of buildings. By integrating the respective results into a common, extensible, library, students can draw upon other results for comparisons and relationships between different aspects or buildings. The complexity this introduces is best supported in a computer medium.The Web offers many examples of architectural analyses on a wide variety of subjects. Commonly, these analyses consist of a collection of documents, categorized and hyperlinked to support navigation through the information space. More sophisticated examples rely on a database for storage and management of the data, and offer a more complex categorization of the information entities and their relationships. These studies present effective ways of accessing and browsing information, however, it is precluded within these analyses to distinguish and relate different components within the project documents. If enabled, instead, this would offer a richer information structure presenting new ways of accessing, viewing, and interpreting this information. Hereto, documents can be decomposed by content. This implies both expanding the document structure, replacing document entities by detailed substructures, and augmenting the structure’s relatedness with content information. The relationships between the resulting components make the documents inherently related by content.We propose a methodology to integrate project documents into a single model, and present an application for the presentation of architectural analyses in an educational setting. This approach provides the students with a simple interface and mechanisms for the presentation of an analysis of design precedents, and possibly their own designs. Since all the information is integrated within a single environment, students will benefit from each others’ studies, and can draw new conclusions across analyses and presentations from their peers.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	81ba
authors	Bilda, Zafer
year	2001
title	Designers‚ Cognition in Traditional versus Digital Media during Conceptual Design
source	Bilkent University Ankara Turkey
summary	Designers depend on representations to externalize their design thoughts. External representations are usually in the form of sketches (referred to as traditional media) in architectural design during the conceptual design. There are also attempts to integrate the use of digital representations into the conceptual design in order to construct a digital design medium. This thesis aims at gaining an insight on designers’ cognitive processes while sketching in digital versus traditional media. The analysis of cognitive processes of designers based on their protocols is necessary to reveal their design behavior in both media. An experiment was designed employing six interior architects (at Bilkent University) solving an interior space planning problem by changing the design media they work with. In order to encode the design behavior, a coding scheme was utilized so that inspecting both the design activity and the responses to media transition was possible in terms of primitive cognitive actions of designers. The analyses of the coding scheme constituents, which are namely segmentation and cognitive action categories enabled a comparative study demonstrating the effect of the use of different media in conceptual design phase. The results depicted that traditional media had advantages over the digital media such as supporting perception of visual-spatial features, and organizational relations of the design, production of alternative solutions and better conception of the design problem. These results also emerged implications for the computer aid in architectural design to support the conceptual phase of the design process.
keywords	Design Cognition; Protocol Analysis; Sketching; Digital Media
series	thesis:MSc
email
last changed	2003/05/01 20:14

_id	3e51
authors	Cerulli, C., Peng, C. and Lawson, B.
year	2001
title	Capturing Histories of Design Processes for Collaborative Building Design Development. Field Trial of the ADS Prototype
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 427-437
summary	The ADS Project - Advanced Design Support for the Construction Design Process - builds on the technological results of the previous COMMIT Project to exploit and demonstrate the benefits of a CAD based Design Decision Support System. COMMIT provides a system for storing knowledge about knowledge within the design process. It records design decisions, the actors who take them and the roles they play when doing so. ADS links COMMIT to an existing object-oriented CAD system, MicroStation/J from Bentley Systems. The project focuses on tackling the problem of managing design information without intruding too much on the design process itself. It provides the possibility to effectively link design decisions back to requirements, to gather rationale information for later stages of the building lifecycle, and to gather knowledge of rationale for later projects. The system enables members of the project team, including clients and constructors, to browse and search the recorded project history of decision making both during and after design development. ADS aims to facilitate change towards a more collaborative process in construction design, to improve the effectiveness of decision-making throughout the construction project and to provide clients with the facility to relate design outcomes to design briefs across the whole building life cycle. In this paper we will describe the field trials of the ADS prototype carried out over a three-month period at the Building Design Partnership (BDP) Manchester office. The objective of these trials is to assess the extent, to which the approach underlying ADS enhances the design process, and to gather and document the views and experiences of practitioners. The ADS prototype was previously tested with historical data of real project (Peng, Cerulli et al. 2000). To gather more valuable knowledge about how a Decision Support System like ADS can be used in practice, the testing and evaluation will be extended to a real project, while it is still ongoing. The live case study will look at some phases of the design of a mixed residential and retail development in Leeds, UK, recording project information while it is created. The users’ feedback on the system usability will inform the continuous redevelopment process that will run in parallel to the live case study. The ADS and COMMIT Projects were both funded by EPSRC.
keywords	Design Rationale, Design Support Systems, Usability Evaluation
series	CAAD Futures
email
last changed	2006/11/07 07:22

For more results click below: