Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 718

Reformat results as: short short into frame detailed detailed into frame

_id	4664
authors	Russell, Peter
year	2001
title	Visualising Non-Visual Building Information
doi	https://doi.org/10.52842/conf.ecaade.2001.546
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 546-551
summary	Architecture can be understood as a process and as an object. In both forms, it consists of a complex of mass, monetary, energy and information flows that occur over time scales ranging from hours and days to centuries. The parts or elements making up buildings and the processes involved in producing, maintaining, using and disposing of them are highly intertwined and multi-dimensional. The field of Architecture can range from complete building stocks down to individual buildings, their elements, and the materials and processes making up these elements. What is more, it is also necessary to introduce time as a dimension in order to model the complete life cycle of buildings. Current CAD systems concentrate primarily on the replication of the traditional drawing process (sometimes in three dimensions) and the visualisation of the finished building. While these models describe the geometry and visual appearance of buildings, the bulk of the information about the building remains unseen. Recently developed systems such as the German LEGOE system have combined a materials database with specification and CAD systems, which allows for a more comprehensive description of the building. However, this additional information is displayed either rudimentarily or as lists of numbers. The information describing the position or visual quality of building elements is, in fact, minuscule in comparison to that describing the properties of the materials involved, their production methods, the energy needed to produce, transport and install the elements, and information concerning toxicology and environmental issues. What is more, these materials are not simply in situ, but can be considered to flow through the building. These flows also occur at widely varying rates according to the type of material and the type of building. The view is taken that buildings are actually temporary repositories of various “flows” which occupy the building during its lifetime. Thus seen, the various aspects of a building at a certain stage of its life are taken to be the total sum of its inputs and outputs at any given time. Currently, its complexity and the lack of cognitive assistance in its presentation limit the understanding of this information. The author postulates that to better understand this information, visual displays of this “non-visual” building information are needed, at least for those who, like architects, are more visually inclined. The paper describes attempts made to go beyond conventional two-dimensional charts, which have tended to only complicate understanding. This is partly due to the need to display a high number of dimensions in one space. Examples are shown of experimental visual displays using three-dimensional graphs created in VRML as well as a “remodelling” of the building based on statistical rather than spatial information to form a building “artefact”. The remodelled artefacts are based on a null-value three-dimensional form and are then modified according to the specific database information without changing their topology. These artefacts are initially somewhat idiosyncratic, but become more useful when a large enough population has been created. With sufficient numbers, it is possible to compare and classify the artefacts according to their visually discernible attributes. The classification of the artefacts is useful in understanding building types independent of their formal “architectural” or spatial qualities, particularly with age-use-classes. The paper also describes initial attempts to create building information landscapes that unfold from the artefacts allowing detailed views of the summarised information displayed by the individual artefacts.
keywords	Building Information, Visualisation, VRML, Life Cycle Analysis
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ga0208
id	ga0208
authors	Wang, Xu and Lau, Siu Yu
year	2002
title	Pursuing New Urban Living Environment In The New Millennium: Projecting The Future Of High-Rise And High Density Living In Hong Kong
source	International Conference on Generative Art
summary	High-rise and high density living is a way of life for most of the 6.7 Million population of Hong Kong. The merits and demerits affiliated with Hong Kong’s compact urban form continues to attract academic deliberations and debates over the acceptability of such urban form as an alternative to urban sprawl for future city and urban life-style. This paper traces the development and causes for Hong Kong’s high-rise and high-density urban form over the past fifty years or so, and focuses its discussions on the pros and cons of high-rise living based on subjective user survey in late 2001 and early 2002. Because of an articulated land shortage, acute topography, escalating population growth, and shortage of time, Hong Kong government and planners have little options left but to adopt vertical development, resulted in a densely and mixed use urban habitat packed with closely built high-rise residences and commercial buildings. From the survey, it is clear that mixed and intensive land use, high quality of living and recreation infrastructure, efficient public transportation network, and segregation of pedestrian and traffic can facilitate the performance of compact urban form. In addition, most of Hong Kong families have been accustomed to high-rise living pattern and the disadvantages such living pattern might cause on its resident’s social communication and children education are readily ignored by most of the people. Based on the analysis of current living situation and development trends in Hong Kong, new pattern of future city form is conceived to be a likely applicable development way in a coastal city with such high density as Hong Kong in the next 50 years. Design countermeasures are presented in this paper to suggest ways of alleviating the pressure of the forever-increasing house requirements in Hong Kong. high-density, high-rise, compact city, social acceptance, life-style.
keywords	high-density, high-rise, compact city, social acceptance, life-style
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	caadria2010_043
id	caadria2010_043
authors	Barker, Tom and M. Hank Haeusler
year	2010
title	Urban digital media: facilitating the intersection between science, the arts and culture in the arena of technology and building
doi	https://doi.org/10.52842/conf.caadria.2010.457
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 457-466
summary	The research presented in this paper investigates ways of providing better design applications for technologies in the field of Urban Digital Media (UDM). The work takes an emergent approach, evolving a design strategy through the early engagement of stakeholders. The paper discusses research in a design-led creative intersection between media technology, culture and the arts in the built environment. The case study discusses opportunities for the enhancement of a university campus experience, learning culture and community, through the provision of an integrated digital presence within campus architecture and urban spaces. It considers types of information architecture (Manovich, 2001) and designs for use in urban settings to create communication-rich, advanced and interactive designed spaces (Haeusler, 2009). The presented research investigates how to create a strategy for display technologies and networked communications to transform and augment the constructed reality of the built environment, allowing new formats of media activity.
keywords	Urban design; outdoor digital media; information architecture; multidisciplinary design; augmented reality; media facades
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	3645
authors	Tsou, Jin-Yeu
year	2001
title	Strategy on applying computational fluid dynamic for building performance evaluation
source	Automation in Construction 10 (3) (2001) pp. 327-335
summary	Predicting and evaluating building performance plays an important role in the training of responsible architects. Building performance includes issues such as: structural stability, acoustic quality, natural lighting, thermal comfort, and ventilation and indoor air quality. These types of analyses are often laborious, non-intuitive, and non-graphical. As a result, these important issues do not arouse the enthusiasm of architecture students or building professionals. The Chinese University of Hong Kong (CUHK) research team proposes to explore and develop a long-term strategy to apply scientific visualization on teaching and research in environmental technology and building performance. This paper presents the development process and results of research projects for applying computational fluid dynamics (CFD) on building performance evaluation. CFD On-line Teaching project's aim is to develop a web-based training course for architecture students to apply CFD simulation on design problem solving. Each lesson not only illustrates basic principles regarding airflow in the building design, it also contains CFD sample files with predefined flow cells for students to test different concepts. GiLin Temple project's aim is to apply CFD simulation on investigating the wind resistance of Tong Dynasty heavy timber structure. Airflow information generated in the project includes the visual representation of the pressure distribution and velocity field on all slices through the temple, and the tracking of particles as they flow around or through a building. The China housing residential airduct study focuses on simulating the indoor airflow regarding the airduct design of China Experimental Urban Housing Scheme. The visual representation of the pressure distribution and velocity field in the airducts provides vital information for helping China Housing Research Center improve the current design.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	35a7
authors	Brown, André G.P.
year	2001
title	Architectural critique through digital scenariobuilding. Augmenting Architectural Criticism and Narrative
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 697-709
summary	As an idea scenario-building has parallels the use of creative faking in related disciplines, most particularly, in contemporary art. The techniques involved in scenario-building and faking offer us enhanced ways of undertaking creative thinking and critical review of architecture and architectural projects. Critical review and theoretical analysis of architecture can be undertaken via a range of methods that Attoe (1978) classifies as Normative, Interpretive and Descriptive. Digital representation now offers us new ways of augmenting these critical styles in ways that have yet to be fully exploited, and possible means of exploitation are illustrated in this paper. In short the work described here shows how digital techniques can be used to enrich architectural investigation, critical reporting and debate.
keywords	Digital Recreation, Scenario-Building, Narrative, Fake, Architectural Critique
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	04f2
authors	Cimerman, Benjamin
year	2001
title	Clients, architects, houses and computers: Experiment and reflection on new roles and relationships in design
doi	https://doi.org/10.52842/conf.acadia.2001.100
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 100-109
summary	This paper reports on recent work that focused on the potential impact of standard computer technology on the relationship between client and architect in the context of residential design. A study of software applications a client could use to develop and evaluate ideas exposed the dearth of software available for the design of spatial complexity by individuals without advanced computer skills, and led to the design of a specific piece of software we call “Space Modeler.” It was prototyped using off-the-shelf virtual reality technology, and tested by a group of freshmen students. The paper discusses the specificities of the software and provides analysis and reflection based on the results of the test, both in terms of design artifacts and users’ comments. The paper concludes that the evolution of the interface to electronic environments is a matter of interest for those concerned with rethinking the training, role and activity of the architect. In the near future prospective homeowners may be able to experience and experiment with the space of their home before it is built. How can the profession embrace new information technology developments and appropriate them for the benefits of society at large?
keywords	Design Software, Design Participation, Visualization, Simulation
series	ACADIA
email
last changed	2022/06/07 07:52

_id	3320
authors	Cinelis, G., Kazakeviciute, G. and Januskevicius, E.
year	2001
title	Modeling and energy analysis of buildings based on integrated CAD – models in tuition of CAAD
doi	https://doi.org/10.52842/conf.ecaade.2001.138
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 138-143
summary	The first implementation of the system MEA for building spatial and structural modeling and energy analysis using integrated graphical digital models in tuition of architecture students is being described. Working at different design stages and with various types of models the aim was to deliver the understanding of CAD tools as intelligent rather than pure technical ones.
keywords	3D Modeling Of Buildings Integrated Digital Graphical Models, Energy Analysis, Variant Design
series	eCAADe
last changed	2022/06/07 07:52

_id	ea46
authors	Colajanni B., Concialdi, S. and Pellitteri, G.
year	2001
title	Construction or Deconstruction: Which is the Best Way to Learn Architecture?
doi	https://doi.org/10.52842/conf.ecaade.2001.299
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 299-304
summary	The actual shift of the teaching methods from teacher-centred expository methods, to learner-centred exploratory ones. The educational goals are no more the construction of a solid theory knowledge from which the behaviour is driven. It is the acquisition of capabilities and skills directly related to the professional activity. The consequence is that the teacher has the task of endowing the student not only with a large amount of documentation but also with at least suggestions of the way to use it. One of these suggestions is the deconstruction (in a literal and not philosophical sense) as a way of investigating the structure of buildings. In a first phase in order to acquire, through generalisation a systematic knowledge of the way the parts of a building (their subsystems) contribute to the global architectural organism. In a second phase in order to explore buildings of special interest aiming at mastering their peculiar solutions. An example of this method is presented, limited to the spatial analysis only both for brevity sake and for particular difficulties presented.
keywords	Deconstruction, Learn Architecture, Learning By Experience
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	f9d8
authors	De Valpine, John and Black, Benjamin
year	2001
title	Physically Based Daylight Simulation and Visualization
doi	https://doi.org/10.52842/conf.acadia.2001.406
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 406-407
summary	While architects typically agree that daylight is a powerful influence for design, architects rarely collect and use daylighting data to help make informed design decisions. This deficiency exists partially because there are no common tools available to provide useful and accessible data. The objective of this project is to provide accurate daylighting data of a prominent urban building site and present it in a clear way so that the architects can make well informed design decisions that respond to site daylighting conditions and improve architectural performance. An urban 3D computer model was created with AutoCad, a commercial CAD application. Daylight was simulated with Radiance, the physically based rendering engine developed at Lawrence Berkeley National Laboratory. The standard CIE model for clear sky and sun was used to produce over 500 images that represent daylight conditions for three different times of year at 10 minute intervals in both luminance and illuminance formats. The simulation data was packaged for analysis with a unique browser tool that enables the architect to easily cycle through the data to evaluate and compare behavior by time of day and by season. The architect can also toggle between luminance and illuminance format to easily visualize both qualitative and quantitative data. The exploration and use of the simulation data can be applied with sensitivity to inform the design and decision making process for the exterior building site.
series	ACADIA
last changed	2022/06/07 07:55

_id	5607
authors	Goldschmidt, Gabriela
year	2001
title	Is a Figure-Concept Binary Argumentation Pattern Inherent in Visual Design Reasoning?
source	J. S. Gero, B. Tversky and T. Purcell (eds), 2001, Visual and Spatial Reasoning in Design, II - Key Centre of Design Computing and Cognition, University of Sydney, Australia
summary	This paper is based on the assumption that because designingis aimed at specifying configurations of entities, designers mustmanipulate forms and shapes and they must resort to visual reasoning todo so. Visual reasoning in designing is seen as the interplay betweenfigural and conceptual reasoning, such that the one supports andcontinues the other in order to arrive at a configuration that is valid interms of all the requirements it is to satisfy. We use protocol analysis toexplore the bond between conceptual and figural reasoning at two levelsof cognitive operation – that of the design move and that of theargument that is its building block. We conclude that the two modes ofreasoning are equi-present in designing; they describe a binary systemcharacterized by high frequency shifts between figure and concept.
series	other
email
more	http://www.arch.usyd.edu.au/kcdc/conferences/vr01/
last changed	2003/05/02 11:16

_id	d146
authors	He, Jie
year	2001
title	CAD Study in Visual Analysis of the Visual Sustainability for China Urban Natural Landscape Planning
source	Chinese University of Hong Kong
summary	In this thesis a GIS-based CAD system prototype of evaluating visual quality of urban natural landscape environment is presented. This prototype is an indispensable component of the integrative Visual Sustainability research, and offers a calculable and visualizable technique to urban visual natural landscape assessment. This scientific method provides precise data to estimate the visibility of natural landscape in urban construction actuality. Furthermore, it can also work out supporting information for maintaining and protecting valuable visual landscape resources in further planning. Introduction of this methodology intends to improve the natural landscape cooperation in China urban planning through visual protection. Combining with popular CAD software such as AutoCAD and Microstation, the research team uses ArcView GIS software and its 3D Analyst extension to accomplish a set of research procedure, which includes data modification, model making, viewshed and view sensibility analysis. In addition, this system can create simultaneous 3D scenes or hire other information media as reference tools for professional analysis, design consultation and intercommunication. The core technologies of this proposed system are viewshed calculation and overlay analysis. In viewshed analysis, human visual characteristics are simulated by a series of ergonomics parameters of viewpoints. Viewshed of each viewpoint can be calculated into vector data and mapped by polygons identifying which region is visible and which is not. Overlay function of the proposed system is used in visual sensibility analysis to achieve the division of higher visual sensible area which indicates the common visible area from different viewpoints. Additionally, viewshed maps and visual sensibility results can add more information to mark out the areas that can satisfy certain visual parameters such as appropriate visual angle or visual distance. These overlaying results can visualized the visible areas into hierarchical visual perception quality categories in order to define the visual landscape significance of particular planning regions. A case study was operated to evaluate this system. The case is in Zhongshan city, Guangdong Province of China. Jinzishan hill region is the study site that picked by collaborating discussion of research team and the local government. It is located on the edge of urban built-up area. Jinzishan massif is the prominent landscape element of the surrounding environment. There are three topics in Jinzishan visual perception in this paper. The first topic is the visual quality evaluation of the intersections of its surrounding road system. The second is the integrated visual perception of two main roads called Qiwandao and Bo‚Äôailu. Finally is the analysis of the hill skyline visual quality in surrounding area. The analysis results in GIS vector data can be converted into popular data format and combined with other spatial information for practical application. And comments for future urban planning are collected and analyzed by professional responses to the computer-generated information investigation.
keywords	Natural Landscaping; Computer-Aided Design; Landscape Architecture; City Planning; Geographic Information Systems
series	thesis:MSc
email
last changed	2003/02/12 22:37

_id	943c
authors	Hendricx, A. and Neuckermans, H.
year	2001
title	The object model at the core of the IDEA+ design environment
source	Beheshti, R. (ed), Advances in Building Informatics, Proceedings of the 8th EuropIA International Conference on the application of Artificial Intelligence, Robotics and Image Processing to Architecture, Building Engineering & Civil Engineering, Delft, The Netherlands, April 25-27, 2001, pp. 113-125
summary	This paper focuses on three different aspects in which the IDEA+ core model differs from many other product modelling research initiatives: the systematic approach in the construction of the model, the respect for the evolutionary nature of architectural design, and the use of actual and complete design cases to test the model. Key words: CAAD, product modelling, integrated design environment, MERODE 1 The IDEA+ project: towards an integrated design environment In spite of the extensive use of all kinds of hardware and software in the architectural offices, the use of computers still does not contribute essentially to better architecture. For the CAD packages on the one hand, they have proven to be an efficient alternative for the traditional drawing board. Yet they fail in the early conceptual stage of design where creativity and exploration play the leading role. For computational tests and analysis tools on the other hand, they can hardly handle the typical absence o
series	other
email
last changed	2003/04/23 15:14

_id	f8e3
authors	Hew, K.-P., Fisher, N. and Awbi, H.B.
year	2001
title	Towards an integrated set of design tools based on a common data format for building and services design
source	Automation in Construction 10 (4) (2001) pp. 459-476
summary	The emerging technology in building product design using knowledge-based engineering (KBE), is currently exciting practitioners in the building construction industry. This paper investigates the use of KBE techniques and assesses the contribution this approach can make to the traditional design process. To do this, the investigation has developed an integrated set of design tools based on a common data format, for integrating 3D electronic prototypes with building services information for use in building design. This approach has been developed on the basis of an open framework and has been applied to the design of an airport terminal building and its plant room. Within the framework, the design process and the information needed, are divided into modules and represented in the form of 3D digital mock-up models (or electronic prototypes). Within the integrated system, an interface has been developed to facilitate the sharing of information with a thermal analysis software application, which contributes to the design process. In this paper, the methodology is discussed and its working system is illustrated and evaluated.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	caadria2007_233
id	caadria2007_233
authors	Hoseini, Ali Ghaffarian; Rahinah Ibrahim
year	2007
title	Using Social Network Analysis for Visualising Spatial Planning During Conceptual Design Phase
doi	https://doi.org/10.52842/conf.caadria.2007.x.i8r
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Spatial diagramming exercises with clients are difficult when most clients are not able to visualize the end results of their requirements. This paper would like to introduce a computational tool—Social Network Analysis (SNA)—commonly used in the communications field to study relationships between people we believe can resolve this visualization problem. Our research intent is to affirm whether or not we can use SNA as a spatial planning tool during conceptual building design. We posit that since the nodes and structural relationships between the nodes may have similar architectural characteristics, the tool would enable architects to make changes by moving any spaces on a floor plan while safely maintaining their spatial relationships to other spaces. In this paper, we would like to develop a proof-of-concept model using an available SNA tool to facilitate spatial diagramming visualization during conceptual design phase. We tested the use of a SNA tool at four levels. The first level determined whether we could develop spatial relationship between functional spaces (such as the living room must be adjacent to the front entry). The second level is on setting priorities values for the different nodes and the linkages. The third level determined whether we could develop grouping relationship between several functional spaces that have a common characteristic (such as public versus private spaces) on one horizontal plane. The final fourth level determined whether we could develop multiple layers that are connected by one common connector (such as a staircase in a double-story house). Our models are validated intellectually by visual comparison between our model and another diagramming by Nooshin (2001) that was developed manually. We are most interested in the fourth level because complexity in the spatial diagramming exercises is caused by multi-layered spatial arrangements at the horizontal and vertical planes. We expect our study to provide us guidelines in developing a prototype for a spatial diagramming tool using SNA, which architects can use to resolve visualization problems when conducting the exercise with their clients.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	a28d
authors	Koutamanis, A., Van Leusen, M. and Mitossi, V.
year	2001
title	Route analysis in complex buildings
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 711-724
summary	Analysis of pedestrian circulation in buildings is usually performed in the early stages of the design process or later on with respect to a specific design problem such as fire safety. In both cases, the analysis relates more to wayfinding, i.e. search for a route on the basis of fundamental normative criteria. Wayfinding analysis in existing buildings is useful for the comparison between “rational” behaviour and actual usage but this comparison does little to explicate the observed structure of pedestrian circulation. In contrast to wayfinding, route analysis deals with the registration and assessment of actual patterns of pedestrian circulation in existing buildings. These patterns are represented topologically and geometrically. The geometric representation makes use of norms underlying building codes in order to reach an appropriate level of abstraction. Route representations are implemented on top of a building representation of relevant spatial and building elements. The building representation serves both as input and output for the route analysis. Input and output are largely automated, including production of the geometric route locally (i.e. within each space) and measurement of route distance and complexity. Use data are collected in an alphanumeric database and linked dynamically to the geometric and topological representation. Route analysis supports and refines other forms of post-occupancy evaluation by adding important dynamic aspects to activity allocation and compartmentalization.
keywords	Pedestrian Circulation, Analysis, Representation, Interaction
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	0865
authors	Mishima, Yoshitaka and Szalapaj, Peter John
year	2001
title	Architectural Design Development through Multimedia Interaction
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 299-314
summary	This paper describes the development of a multimedia system aimed at architects and architectural students for the purpose of helping them to understand the basic concepts of architectural analysis. Analytical features in the system that we have developed include many design-theoretic concepts such as massing, balance and circulation. Other concepts are more directly related to the built environment and include elements such as lighting, structure and construction. The system illustrates architectural analysis carried out on a range of building types dynamically, and allows users to navigate architectural analyses interactively. Users can learn about the differences between buildings and their corresponding analyses in a supportive non-linear learning process, and can explore building types depending upon their own interests or needs. The prototype system contains analyses of three British building projects. They show different types of architecture in order to demonstrate important design theoretic and environmental differences. Conceptual models in the system show important aspects of a particular analysis simply, and each analysis is additionally described with text, animations, video clips and interviews with architects (talking heads). Most of the models were generated by the use of architectural CAD software. Animation techniques were used to describe the analyses of buildings clearly and dynamically. Users can visualise how whole buildings were designed from an analytical point of view, and the system illustrates design thinking by showing dynamic presentations of analyses. Users can structure their own design learning processes through a series of interactions. These interactions are supported with flexible cross-referencing mechanisms implemented in Macromedia Director 8.0 exploiting Frame Markers, Event Handling, Navigation, and Buttons in the context of the object-oriented Lingo programming language. The navigation component of this system has a logical matrix structure reflecting the fact that analytical information is interrelated across building types, giving rise to vertical and horizontal patterns of access. The features of Director 8.0 can control this navigation in a flexible yet structured way. Users not only learn about analysis, but also how to present their own designs to the public through the use of different kinds of presentation techniques, particularly through the use of conceptual models. We intend that users can show their projects from their own analytical viewpoints instead of simply showing realistic images of final designs. Presentations can also be recorded in the system, and these can in turn be used as reference material for other users. This system is currently being developed further by storing presentations and translating them into different languages (e.g. Japanese) so that foreign users in other institutions can interact with these presentations. This system has been evaluated in the context of an undergraduate CAD course at the School of Architecture, University of Sheffield, UK. We are currently examining the usefulness of the system based upon an evaluation process, in addition to including more building types for future study.
keywords	Analysis Of Form, Dynamic Interaction, Conceptual Models
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	cf2011_p163
id	cf2011_p163
authors	Park, Hyoung-June
year	2011
title	Mass-Customization in the Design of 4,000 Bus Stops
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 265-278.
summary	In Hawaii, ‚"TheBus‚" has been a main transportation system since 1971. Considering the high cost of living in Hawaii and the absence of a rail system, the use of ‚"TheBus‚" has been an instrumental vein of the city life in Honolulu with rhythmical pauses at about 4,000 bus stops in Honolulu. However, existing undifferentiated bus stops are developed from a cost effective mass production system so that they have been problematic for satisfying specific needs from various site conditions. In this research, an integrated computational method of mass-customization for designing 4,000 bus stops is introduced. According to various site conditions, the design of each bus stop is customized. Unlike the mass‚Äêproduced bus stops commonly seen in cities today, the proposed computational method in this paper produces bus stop design outcomes that fit into the physical characteristics of the location in which they are installed. Mass-customization allows for the creation and production of unique or similar buildings and building components, differentiated through digitally‚Äêcontrolled variation (Kolarevic, 2003). The employment of a computational mass‚Äêcustomization in architectural design extends the boundary of design solutions to the satisfaction of multi-objective requirements and unlimited freedom to search alternative solutions (Duarte, 2001; Caldas, 2006). The computational method developed in this paper consists of 1) definition of a prototype, 2) parametric variation, 3) manual deformation, and 4) simulation based deformation. The definition of a prototype is the development of a basic design to be transformed for satisfying various conditions given from a site. In this paper, the bus stop prototype is developed from the analysis of more than 300 bus stops and the categorization of the existing bus stops according to their physical conditions, contextual conditions, climatic conditions, and existing amenities. Based upon the outcome of the analysis, the design variables of a bus stop prototype are defined. Those design variables then guide the basic physical parameters for changing the physical configuration of the prototype according to a given site. From this, many possible design outcomes are generated as instances for further developments. The process of manual deformation is where the designer employs its intuition to develop the selected parametric variation. The designer is compelled to think about the possible implication derived from formal variation. This optional process allows every design decision to have a creative solution from an individual designer with an incidental quality in aesthetics, but substantiated functional quality. Finally the deformation of the selection is guided and controlled by the influence of sun direction/ exposure to the selection. The simulation based deformation starts with the movement of the sun as the trigger for generating the variations of the bus stop prototype. The implementation of the computational method was made within the combination of MEL (Maya Enbedded Language), autodesk MAYA and Ecotect environment.
keywords	mass-customization, parametric variation, simulation based deformation
series	CAAD Futures
email
last changed	2012/02/11 19:21

For more results click below: