Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 709

Reformat results as: short short into frame detailed detailed into frame

_id	5cf4
id	5cf4
authors	Barrionuevo, Luis F.
year	2004
title	LOS "SPIROSPACES"
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 179-187.
summary	This paper deals with “Spirospaces”. These are a conversion to the third dimension of the two dimensional geometric entities called “Spirolaterals”. Abelson, Harold, diSessa and Andera (1968) gave the first rules concerning Spirolaterals. To obtain a Spirolateral from a set of straight lines, the first of them must be one unit long and the following must be incremented one unit at each step, at the same time that they turn in a constant direction. Odds (1973) establish the variation of the rotation direction, either to the left or the right. However, he did not give a mathematical relation able to calculate open Spirolaterals. Krawczyk (2001) developed a computer program that generates Spirolaterals following the method suggested by Abelson. These are Spirolaterals obtained by enumeration without a predictive mathematical formula. Krawczyc went farther proposing Spirolaterals based in curved lines. He pointed out that there are a variety of spirolateral forms that have architectural potentiality. Following this, the architectural potentiality of Spirolaterals is the basis of this paper. To take advantage of that potentiality a computer program was implemented to generate spatial configurations based in Spirolaterals. When a third dimension is given to the Spirolaterals they become Spirospaces. These new entities need spatial and design parameters to be useful for architectural purposes. Barrionuevo and Borsetti (2001) gave results about that work establishing the concept of Spirospaces. The aim of this paper is to describe a work directed to improve rules and procedures concerning Spirospaces. It is expected that these procedures governed by the proposed rules can be employed as tools during the early steps in the architectural design process. In this work some aspects concerning Spirospaces are considered. First, Spirolaterals are presented as the predecessors of Spirospaces. Second, Spirospaces are defined, together with their structural parameters. Architectural modeling is studied at the light of two special elements of the Spirospaces: Interstitial spaces and Object spaces. Next, a computer program is presented as the appropriate tool to model configurations having architectural potentiality. Finally, the results obtained running the computer program are analyzed to determine their possible use as architectural forms. Several graphic illustrations are presented showing steps going from the exploration of spatial alternatives to the selection of a specific configuration to be developed. It is expected that the described computer program could be employed as a design aid tool. As the operation of the program generates a variety of spaces able to dwell architectural objects, it eases the search of configurations suitable to specific functions. The results obtained have the possibility of being exported to computer graphic applications able to add materials, lights and cameras.
keywords	Spirolaterals, Spirospaces, architectural spaces, interstitial spaces, objectual spaces
series	other
type	normal paper
email
last changed	2005/04/07 15:34

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	36f5
authors	Burry, M., Burry, J. and Faulí, J.
year	2001
title	Sagrada Família Rosassa: Global Computeraided Dialogue between Designer and Craftsperson (Overcoming Differences in Age, Time and Distance)
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 076-086
doi	https://doi.org/10.52842/conf.acadia.2001.076
summary	The rose window (‘rosassa’ in Catalan) recently completed between the two groups of towers that make up the Passion Façade of Gaudí’s Sagrada Família Church in Barcelona measures eight metres wide and thirty-five metres in height [Figure 1]. There were four phases to the design based in three distinct geographical locations. The design was undertaken on site, design description in Australia some eighteen thousand kilometres distant, stone-cutting a thousand kilometres distant in Galicia, with the completion of the window in March 2001. The entire undertaking was achieved within a timeframe of fifteen months from the first design sketch. Within this relatively short period, the entire team achieved a new marriage between architecture and construction, a broader relationship between time-honoured craft technique with high technology, and evidence of leading the way in trans-global collaboration via the Internet. Together the various members of the project team combined to demonstrate that the technical office on site at the Sagrada Família Church now has the capacity to use ‘just-in-time’ project management in order to increase efficiency. The processes and dialogues developed help transcend the tyranny of distance, the difficult relationship between traditional craft based technique and innovative digitally enhanced production methods, and the three generational age differences between the youngest and more senior team members.
keywords	Digital Practice, Global Collaboration, Rapid Prototyping
series	ACADIA
email
last changed	2022/06/07 07:54

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	3dd6
authors	Guzmán Dumont, Guillermo and Hughes, Thomas
year	2001
title	MATERIAL PRESENCE: SPATIAL POTENTIAL
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 september 2001, pp. 186-188
summary	This paper describes two design studio projects with first year architecture students at the University of Nottingham. Originally, this exercise was aimed to introduce them to CAD drawing tools, but due to some particular characteristics of the brief, some unexpected results came to add an interesting value to their design learning process. From the exploration of a functional building typology through the digital construction of an iconic case study, it was developed a creative fabrication of absent architecture based on research, analysis and imagination. Then there was identified the most appropriate medium for communication of these defining characteristics. Unexpected focus on material considerations over spatial analysis, motivated a second exercise which used image manipulation, based on graphic source material and digital imaging of physical models.
series	other
email
last changed	2001/12/01 21:46

_id	a40c
authors	Inkinen, Tommi
year	2001
title	A city revised: representing or recreating the urban space as a polygon experience – a discussion of the case of virtual Turku
source	CORP 2001, Vienna, pp. 351-354
summary	The Internet has provided a new means to represent urban space. The development of modelling languages,like VRML, has given us the tools to recreate urban locations on the net. In this paper, the virtual image ofTurku, a city located in Southwest Finland is discussed. My approach is twofold. Firstly, I focus on the‘official’ city web-page and its two dimensional textual appearance. This constitutes the essence of virtualcity as ‘public’ project. Secondly, there is a challenging new field that combines aspects from computersciences, urban studies and Internet research. This refers to three-dimensional city models that are used torepresent an exact copy of the material space of cities. The analysis is based on interpretation of interviewsand contents of the two site structures. The following conclusions are proposed. The mission of a virtualpublic city is twofold: it is a local project, purposed to build a new and efficient medium to connect theadministration and citizens; and it is also a global/national project, a medium of advertising and givingknowledge of the tourist possibilities and attractions. On the other hand, the private virtual city project isbased on potential future incomes. It is a means of gaining profit via expanding possibilities provided by ecommerce.
series	other
email
more	www.corp.at
last changed	2002/12/19 12:18

_id	acadia11_372
id	acadia11_372
authors	James, Anne; Nagasaka, Dai
year	2011
title	Integrative Design Strategies for Multimedia in Architecture
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 372-379
doi	https://doi.org/10.52842/conf.acadia.2011.372
summary	Multidisciplinary efforts that have shaped the current integration of multimedia into architectural spaces have primarily been conducted by collaborative efforts among art, engineering, interaction design, informatics and software programming. These collaborations have focused on the complexities of designing for applications of multimedia in specific real world contexts. Outside a small but growing number of researchers and practitioners, architects have been largely absent from these efforts. This has resulted in projects that deal primarily with developing technologies augmenting existing architectural environments. (Greenfield and Shepard 2007)This paper examines the potential of multimedia and architecture integration to create new possibilities for architectural space. Established practices of constructing architecture suggest creating space by conventional architectural means. On the other hand, multimedia influences and their effect on the tectonics, topos and typos (Frampton 2001) of an architectural space (‘multimedia effects matrix’) suggest new modes of shaping space. It is proposed that correlations exist between those two that could inform unified design strategies. Case study analyses were conducted examining five works of interactive spaces and multimedia installation artworks, selected from an initial larger study of 25 works. Each case study investigated the means of shaping space employed, according to both conventional architectural practices and the principles of multimedia influence (in reference to the ‘multimedia effects matrix’) (James and Nagasaka 2010, 278-285). Findings from the case studies suggest strong correlations between the two approaches to spatial construction. To indicate these correlations, this paper presents five speculative integrative design strategies derived from the case studies, intended to inform future architectural design practice.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	4c45
authors	QaQish, Ra'Ed K.
year	2001
title	Exploiting Tools of Evaluation to Improve CAAD Teaching Methods. A Case Study of Inter & Intra ECTM Model
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 215-230
summary	This paper reports on an ongoing research study model into the Evaluation of CAAD Teaching Methods (ECTM) of which a number of resolutions and strategies were attained via an empirical investigation. The first stage of the study findings proposed a framework for the evaluation of architecture courses in tandem with CAAD. The second stage was based on the Inter & Intra ECTM design model as a strategy for acquiring solutions to CAAD problems through the exploitation of CAAD evaluation tools. The ECTM model structure criteria: the Model Concepts, the Operational Context, Dialectic Meanings, Relational Context, Performing Methods and Level of Integration were illuminated. ECTM model has a twofold involvement junctures, which describe CAAD evaluation behaviour. The first involves the evaluator in an interdepartmental comparison of CAAD integration into the curriculum, and/or between schools of architecture. The second engages the evaluator in an intradepartmental study of CAAD integration, and within the institution. The study projected an attempt to validate the Inter & Intra ECTM design model in concert with evaluation. The paper presents an extended description of the objectives, procedures and testing designed for the two abovementioned junctures composing the proposed ECTM case studies. Sequences of methods of data collection employed as a vehicle for the ECTM were Kirkpatrick model, questionnaire survey, observation (using an ECTM checklist) and experimental studies. The paper also explores variables and indicators used, and advances to shed some light on the methods of statistical analysis employment. ECTM model as a tool to attain CAAD effectiveness might redefine the role of collaborators/ team partnerships in CAAD tuition; and induce the level of technology selection and adaptation amongst schools, e.g. tutors and coursework interconnectivity. The ECTM model may also work as a framework of strategies to augment interactivity and positive learning amongst both staff and students.
keywords	Evaluation, Teaching Methods, Interactivity, Effectiveness
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	4dd3
authors	Reymen, Isabelle M.M.J.
year	2001
title	Improving design processes through structured reflection : a domain-independent approach
source	Eindhoven University of Technology
summary	In the world of designing, three fields of attention can be recognised, namely design research, design practice, and design education. Gaps exist between these three fields. In this thesis about designing, the focus is on the gap between design research and design practice. Design practice includes many design disciplines and an increasing number of multidisciplinary teams. Main problems in design practice are the communication between designers with a different background and the integration and co-ordination of important aspects during a design process. By tackling these problems, the effectiveness and efficiency of design processes in practice can be improved. The study of similarities and differences between design processes in several design disciplines and the development of support for reflection on design processes are topics that can improve design practice and that deserve more attention in design research. The goal of my research is to decrease the gap between design research and design practice in order to improve design processes. Reflection on design processes can help designers to improve their design process, its results, and the designer’s proficiency: By reflecting explicitly on the current design situation and on the performed design activities, in a systematic way and on a regular basis, designers can plan next design activities that can be performed effectively and efficiently given the design goal at that moment. In this thesis, the combination of systematic and regular reflection is called structured reflection. To improve design processes in various design disciplines in practice, the study of similarities and differences between design processes in several disciplines can be useful. Similarities between design processes are the basis for domain-independent design knowledge (as distinguished from domain-specific design knowledge). To reach the goal of my research, I have chosen to combine, in a broad explorative study, the development of support for structured reflection on design processes and the development of domain-independent design knowledge. This thesis describes a domain-independent approach to improve design processes through structured reflection. My research process can be summarised as follows. I studied three design disciplines, namely architecture, mechanical engineering, and software engineering. To get input from design practice, I did qualitative empirical research: I performed twelve case studies in the three disciplines to inventory characteristics of design processes and I compared the cases for similarities and differences. The similarities, together with the results of a literature study, have been the basis for the development of domain-independent descriptive design knowledge. The developed descriptive knowledge, in turn, formed the basis for developing domain-independent prescriptive design knowledge. At the end of the project, I confronted all results with design practice to get feedback on the results in another empirical study and I performed a literature study to position the results in the design literature. My design philosophy and design frame are the descriptive results developed to answer the first research question, namely “How to describe design processes in a domain-independent way?”. My design philosophy is a set of domain-independent concepts and terms for describing a design process. The concepts and terms are based on an application of the general theory of state-transition systems to the context of designing; the concepts of state and state transition correspond to the main concepts of design situation and design activity in my design philosophy. The answer to the first research question given by the design philosophy is refined in a design frame: The design frame offers a means to structure the description of a design process in a domain-independent way. Major structuring concepts of the design frame are dimensions and subjects. I define three dimensions, namely level, perspective, and time. These dimensions define a three-dimensional space, called a positioning space, in which important aspects of design processes can be positioned. A positioning space must be defined for each subject, being the three parts of a design situation: the product being designed, the design process, and the design context. My design frame is a domain-independent structure formed by the combination of the three dimensions for each subject. My design method is the prescriptive result developed to answer the second research question, namely “How to support structured reflection on design processes in a domain-independent way?”. My design method is a domain-independent aid that offers designers support for reflecting on design processes in a structured way. Reflection on design processes is defined as an introspective contemplation on the designer’s perception of the design situation and on the remembered design activities. A reflection process is described as a process that consists of three steps that are called preparation, image forming, and conclusion drawing. The design method is based on two main concepts: The first concept is the systematic description and analysis of design situations and design activities by means of forms and checklists; only systematic support for the preparation step of a reflection process is developed. The second concept is the idea of design sessions, introduced to stimulate designers to reflect regularly during a design process. A design session is defined as a period of time during which one or more designers are working on a subtask of a certain design task, for example, one afternoon, a whole day, or a week. Both concepts are combined to support structured reflection on design processes. The complete design method consists of five steps for each design session, namely planning a design session, defining the subtask of the design session, reflecting at the beginning of a design session, designing during the core of a design session, and reflecting at the end of a design session. A prototype software tool, called ECHO, has been developed to explore the benefits of using a software system to facilitate the use of the design method. Together, the design philosophy and the design frame offer concepts, a vocabulary, and a structure to describe design processes in a domain-independent way. The design method is a first proposal of a method that supports structured reflection on design processes. My results are thus possible answers to the mentioned research questions and are starting points to improve the effectiveness and efficiency of design processes. Based on the feedback I collected, I am optimistic about the applicability of my results in design practice. By asking input from design practice and by developing results that are useful for design practice and that contribute to design research, I contribute to decrease the gap between design research and design practice. The most important recommendations for further research are to test all results extensively in design practice and to investigate how to apply the results in design education.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	6d37
authors	Léglise, Michel
year	2001
title	Computer-stimulated design: construction of a personal repertoire from scattered fragments
source	Automation in Construction 10 (5) (2001) pp. 577-588
summary	This paper describes some possibilities of creating and structuring a personal digital memory capable of facilitating architectural design and design learning. The raw materials of this memory are different representations that can be found on the Web. Having interpreted these representations, one is able to construct a meaningful memory, educated and personal, which can be called upon subsequently during the design phase, as long as one has a medium that can represent this memory and put it to good use. As a practical, effective application of this process, we will describe part of a configuration geared towards the learning of architectural design. This configuration is composed of various elements, precisely arranged in space and time in a set of interrelations and interactions. The design student is placed at the centre of the arrangement, from where he or she can call on a broad spectrum of possibilities from the Web as provider of image documents. When necessary, students can use specially developed software that allows them a verbal and pictorial interpretation stimulated during particular phases of the learning process. In this way, through pictorial material presented on the network, the students can build up a digital library appropriate to their own understanding of architecture and their own representation of the world. At this point, they can abandon the universe of digital documents and media and return to the world of materials and shapes in intensive design studio sessions, where slowly maturing ideas can at last find concrete form. Thus, we deal with the relationship between the public, shareable aspect of the documents, and the private aspect: the individual interpretation of these documents. In the same way, we show how, within the framework of the teaching programme that has been set up, and without interference, this relationship between public and private can be linked into a dimension of the work of learning which is at times personal, at times collective. The conclusion attempts to outline the issues raised by this sort of configuration, and to show how thoughtful use of computers and networks can stimulate and enrich design rather than just "aid" it, as is generally accepted.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	avocaad_2001_14
id	avocaad_2001_14
authors	Adam Jakimowicz
year	2001
title	Non-Linear Postrationalisation: Architectural Values Emergence in a Teamwork Interpretation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The paper presents the outcomes of the experiment being conducted at the Faculty of Architecture in Bialystok, which derives form three main sources: a new course of architectural composition by computer modelling, developed and conducted in Bialystok postrationalisation as a formulation platform for new architectural values and theories, applied by e.g. Bernard Tschumi the idea of new values emergence resulting form a teamwork, when placed in an appropriate environment; It is assumed that the work performed first intuitively, can be later seriously interpreted, and to some extent rationalised, verbalised, described. With no doubt we can state, that in creative parts of architectural activities, very often decision are taken intuitively (form design). So this ‘procedure’ of postrationalisation of intuitively undertaken efforts and results seems to be very important –when trying to explain ideas. This kind of activity is also very important during the first years of architectural education. In case of this experiment, the students’ works from the course of architectural composition are taken as a base and subjects for interpretation, and values research. However, when at first, individual works are being interpreted by their authors, at the latter stage, the teams are to be formed. The aim of the teamwork is to present individual works, analyse them, find common value(s), and represent it (them) in an appropriate, creative way. The ideal environment to perform this work is hypertext based internet, because the non-linearity of team interpretations is unavoidable. On the other hand, the digital input data (computer models) is a very appropriate initial material to be used for hypermedia development. The experiment is to analyse the specific of the following: the self-influence of the group on the individual work ‘qualification’, mutual influence of the team members on their own work interpretation, the influence of the digital non-linear environment on the final outcome definition. The added value of hypertext in architectural groupwork digital performance shall be examined and described. A new value of individualised, though group based, non-linearity of expression will be presented and concluded.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_05
id	avocaad_2001_05
authors	Alexander Koutamanis
year	2001
title	Analysis and the descriptive approach
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The rise of consciousness concerning the quality of working and living conditions has been a permanent though frequently underplayed theme in architecture and building since the reconstruction period. It has led to an explosive growth of programmatic requirements on building behaviour and performance, thus also stimulating the development of design analysis. The first stage of development was characterized by the evolution of prescriptive systems. These reversed the structure of pre-existing proscriptive systems into sequences of known steps that should be taken in order to achieve adequate results. Prescriptive systems complemented rather than replaced proscriptive ones, thereby creating an uncertain mixture of orthodoxy and orthopraxy that failed to provide design guidance for improving design performance and quality.The second stage in the development of design analysis focuses on descriptive methods and techniques for analyzing and supporting evaluation. Technologies such as simulation and scientific visualization are employed so as to produce detailed, accurate and reliable projections of building behaviour and performance. These projections can be correlated into a comprehensive and coherent description of a building using representations of form as information carriers. In these representations feedback and interaction assume a visual character that fits both design attitudes and lay perception of the built environment, but on the basis of a quantitative background that justifies, verifies and refines design actions. Descriptive analysis is currently the most promising direction for confronting and resolving design complexity. It provides the designer with useful insights into the causes and effects of various design problems but frequently comes short of providing clear design guidance for two main reasons: (1) it adds substantial amounts of information to the already unmanageable loads the designer must handle, and (2) it may provide incoherent cues for the further development of a design. Consequently the descriptive approach to analysis is always in danger of been supplanted by abstract decision making.One way of providing the desired design guidance is to complement the connection of descriptive analyses to representations of form (and from there to synthesis) with two interface components. The first is a memory component, implemented as case-bases of precedent designs. These designs encapsulate integrated design information that can be matched to the design in hand in terms of form, function and performance. Comparison between precedents with a known performance and a new design facilitate identification of design aspects that need be improved, as well as of wider formal and functional consequences. The second component is an adaptive generative system capable of guiding exploration of these aspects, both in the precedents and the new design. The aim of this system is to provide feedback from analysis to synthesis. By exploring the scope of the analysis and the applicability of the conclusions to more designs, the designer generates a coherent and consistent collection of partial solutions that explore a relevant solution space. Development of the first component, the design case-bases, is no trivial task. Transformability in the representation of cases and flexible classification in a database are critical to the identification and treatment of a design aspect. Nevertheless, the state of the art in case-based reasoning and the extensive corpus of analysed designs provide the essential building blocks. The second component, the adaptive generative system, poses more questions. Existing generative techniques do not possess the necessary richness or multidimensionality. Moreover, it is imperative that the designer plays a more active role in the control of the process than merely tweaking local variables. At the same time, the system should prevent that redesigning degenerates into a blind trial-and-error enumeration of possibilities. Guided empirical design research arguably provides the means for the evolutionary development of the second component.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	1543
authors	Bailey, Rohan O.
year	2001
title	A digital design coach for young designers
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 311-314
doi	https://doi.org/10.52842/conf.caadria.2001.311
summary	It is the intention of this paper is to construct for the reader a suitable foundation on which to determine a digital design coach. It seeks to define this possibility by examining two ideas. The first is visual thinking, as used by designers in the process of design. The second idea, that of providing students with expert partners for the learning of design is supported by evidence from a variation on protocol analysis (developed by the author) and a related design studio conducted in New Zealand and Jamaica. Using these concepts in relation to recent advances in the development of digital tools the paper proposes what a digital coach may look like.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	444b
authors	Barrionuevo, Luis F.
year	2001
title	Positioning of Buildings in a Land
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 493-499
doi	https://doi.org/10.52842/conf.ecaade.2001.493
summary	Configurational studies are useful tools to architectural designing, since they help to understand the grouping of objects in the space (two-dimensional and/or threedimensional). The designer, after a classification of objects that satisfies the needs set to a group of objects, impose some restrictions to the objects that will govern the composition. These restrictions are those that will define the result through operations carried out by the designer. Among these operations the location of buildings in a determined area and the particular environmental qualities condition the final result. This work presents the results obtained by means of the implementation of a computing program of the type Evolution Program (EP) implemented in language C. The implementation of the program is explained in the first part of the paper. In the second part the successive steps are described. The numerical results obtained with the mentioned program are shown graphically. Examples of different complexity level illustrate the discussion of the theoretical matters.
keywords	Positioning Buildings, Configurational Studies, Evolutionary Design, Evolutionary Algorithms, Evolutionary Programming
series	eCAADe
last changed	2022/06/07 07:54

_id	cdd4
authors	Björk, Bo-Christer
year	2001
title	Open Source, Open Science, OpenCourseWare
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 13-17
doi	https://doi.org/10.52842/conf.ecaade.2001.013
summary	The Internet has in just a few years radically changed the technical foundation for how the supply chain of scientific publications and teaching materials functions. As researchers we can with just a few clicks find a significant part of all the information we need for free on the World Wide Web. As teachers we can find huge amounts of digital material which can be downloaded or linked from the web and included in presentation overheads, or hyperlinked as reading material. Yet the business and legal (copyright issues) infrastructure has hardly changed and presents a barrier to innovation and reengineering of the overall process. This paper describes some recent trends in how the Internet influences these two fields (publication of research resuls and production of teaching material) as well as related developments in the organisation of software develop-ment, and discusses them both from an economic and philosophical perspective.
keywords	Internet, Scientific Publication, Teaching Material, Open Source
series	eCAADe
email
last changed	2022/06/07 07:52

_id	2006_000
id	2006_000
authors	Bourdakis, Vassilis and Charitos, Dimitris (eds.)
year	2006
title	Communicating Space(s)
source	24th eCAADe Conference Proceedings [ISBN 0-9541183-5-9], Volos (Greece) 6-9 September 2006, 914 p.
doi	https://doi.org/10.52842/conf.ecaade.2006
summary	The theme of this conference builds on and investigates the pre-existing and endlessly unfolding relationship between two domains of scientific inquiry: Architecture, urban design and planning, environmental design, geography and Social theory, media and communication studies, political science, cultural studies and social anthropology. Architectural design involves communication and could thus be partly considered a communicational activity. Designers (or not) see architectural designs, implicitly, as carriers of information and symbolic content; similarly buildings and urban environments have been “read” and interpreted by many (usu- ally not architects) as cultural texts. At the same time, social and cultural studies have studied buildings and cities, as contexts for social and cultural activities and life in general, from their mundane expression of “everyday life” (Highmore, 2001) to elite expressions of artistic creativity and performance. Information and communication technologies (ICTs) support both of these levels of scientific inquiry in many ways. Most importantly however, ICTs need design studies, architectural and visual design, social and cultural studies in their quest to create aesthetically pleasing, ergonomically efficient and functional ICT sys- tems; this need for interdisciplinarity is best articulated by the low quality of most on-line content and applica- tions published on the web.
series	eCAADe
type	normal paper
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

For more results click below: