Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 717

Reformat results as: short short into frame detailed detailed into frame

_id	2006_000
id	2006_000
authors	Bourdakis, Vassilis and Charitos, Dimitris (eds.)
year	2006
title	Communicating Space(s)
doi	https://doi.org/10.52842/conf.ecaade.2006
source	24th eCAADe Conference Proceedings [ISBN 0-9541183-5-9], Volos (Greece) 6-9 September 2006, 914 p.
summary	The theme of this conference builds on and investigates the pre-existing and endlessly unfolding relationship between two domains of scientific inquiry: Architecture, urban design and planning, environmental design, geography and Social theory, media and communication studies, political science, cultural studies and social anthropology. Architectural design involves communication and could thus be partly considered a communicational activity. Designers (or not) see architectural designs, implicitly, as carriers of information and symbolic content; similarly buildings and urban environments have been “read” and interpreted by many (usu- ally not architects) as cultural texts. At the same time, social and cultural studies have studied buildings and cities, as contexts for social and cultural activities and life in general, from their mundane expression of “everyday life” (Highmore, 2001) to elite expressions of artistic creativity and performance. Information and communication technologies (ICTs) support both of these levels of scientific inquiry in many ways. Most importantly however, ICTs need design studies, architectural and visual design, social and cultural studies in their quest to create aesthetically pleasing, ergonomically efficient and functional ICT sys- tems; this need for interdisciplinarity is best articulated by the low quality of most on-line content and applica- tions published on the web.
series	eCAADe
type	normal paper
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	1b10
id	1b10
authors	Bay, Joo-Hwa
year	2001
title	Cognitive Biases - The case of tropical architecture
source	Delft University of Technology
summary	This dissertation investigates, i) How cognitive biases (or illusions) may lead to errors in design thinking, ii) Why architects use architectural precedents as heuristics despite such possible errors, and iii) Develops a design tool that can overcome this type of errors through the introduction of a rebuttal mechanism. The mechanism controls biases and improves accuracy in architectural thinking. // The research method applied is interdisciplinary. It employs knowledge from cognitive science, environmental engineering, and architectural theory. The case study approach is also used. The investigation is made in the case of tropical architecture. The investigation of architectural biases draws from work by A. Tversky and D. Kahneman in 1982 on “Heuristics and biases”. According to Tversky and Kahneman, the use of heuristics of representativeness (based on similarity) and availability (based on ease of recall and imaginability) for judgement of probability can result in cognitive biases of illusions of validity and biases due to imaginability respectively. This theory can be used analogically to understand how errors arise in the judgement of environmental behaviour anticipated from various spatial configurations, leading to designs with dysfunctional performances when built. Incomplete information, limited time, and human mental resources make design thinking in practice difficult and impossible to solve. It is not possible to analyse all possible alternative solutions, multiple contingencies, and multiple conflicting demands, as doing so will lead to combinatorial explosion. One of the ways to cope with the difficult design problem is to use precedents as heuristic devices, as shortcuts in design thinking, and at the risk of errors. This is done with analogical, pre-parametric, and qualitative means of thinking, without quantitative calculations. Heuristics can be efficient and reasonably effective, but may not always be good enough or even correct, because they can have associated cognitive biases that lead to errors. Several debiasing strategies are discussed, and one possibility is to introduce a rebuttal mechanism to refocus the designer’s thinking on the negative and opposite outcomes in his judgements, in order to debias these illusions. The research is carried out within the framework of design theory developed by the Design Knowledge System Research Centre, TUDelft. This strategy is tested with an experiment. The results show that the introduction of a rebuttal mechanism can debias and improve design judgements substantially in environmental control. The tool developed has possible applications in design practice and education, and in particular, in the designing of sustainable environments.
keywords	Design bias; Design knowledge; Design rebuttal; Design Precedent; Pre-parametric design; Tropical architecture; Sustainability
series	thesis:PhD
type	normal paper
email
last changed	2006/05/28 07:42

_id	ga0123
id	ga0123
authors	Coates P., Appels, T. Simon, C. and Derix, C.
year	2001
title	Current work at CECA
source	International Conference on Generative Art
summary	The centre for environment computing and architecture continues to experiment with new ways to form, and this paper presents three recent projects from the MSc programme. The three projects all share underlying assumptions about the use of generative algorithms to constructform, using fractal decomposition, lindenmayer systems and the marching cubes algorithm respectively to construct three dimensional "architectural" objects. The data needed to drive the morphology however ranges from formal proportional systems and Genetic L systems programming through swarming systems to perceptive self organising neural nets. In all cases, the projects pose the question what is architectural form. While after Stanford Anderson (Anderson 66) we know it is simplistic to say that it is an automatic outcome of a proper definition of the brief, it is also difficult to accept that the form of a building is an entirely abstract geometrical object existing without recourse to social or contextual justification. In anattempt to resolve these issues we have turned to the study of systems and general system theory as a way of understanding the mechanics of emergence and morphogenesis generally, and the
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ea46
authors	Colajanni B., Concialdi, S. and Pellitteri, G.
year	2001
title	Construction or Deconstruction: Which is the Best Way to Learn Architecture?
doi	https://doi.org/10.52842/conf.ecaade.2001.299
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 299-304
summary	The actual shift of the teaching methods from teacher-centred expository methods, to learner-centred exploratory ones. The educational goals are no more the construction of a solid theory knowledge from which the behaviour is driven. It is the acquisition of capabilities and skills directly related to the professional activity. The consequence is that the teacher has the task of endowing the student not only with a large amount of documentation but also with at least suggestions of the way to use it. One of these suggestions is the deconstruction (in a literal and not philosophical sense) as a way of investigating the structure of buildings. In a first phase in order to acquire, through generalisation a systematic knowledge of the way the parts of a building (their subsystems) contribute to the global architectural organism. In a second phase in order to explore buildings of special interest aiming at mastering their peculiar solutions. An example of this method is presented, limited to the spatial analysis only both for brevity sake and for particular difficulties presented.
keywords	Deconstruction, Learn Architecture, Learning By Experience
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2003_b6-1
id	caadria2003_b6-1
authors	Howe, A.S., Kang, P. and Nasari, Omid
year	2003
title	Digiosk Digital Design to Robotic Deployment in Two Months
doi	https://doi.org/10.52842/conf.caadria.2003.811
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 811-826
summary	In this paper, we discuss Kit-of-parts Theory and how it applies to the design, manufacture, and operation of a small robotic deployable demonstration structure called the Digiosk (Howe, 2001). "Kit-of-parts Theory" refers to the study and application of objectoriented building techniques, where building components are predesigned / pre-engineered / pre-fabricated for inclusion in joint-based (linear element), panel-based (planar element), module-based (solid element), and deployable (time element) construction systems. The Digiosk is an exposition display kiosk that was designed and manufactured digitally, and brought from concept to robotic functionality in a short period of time. Using kinematic mechanisms the cylinder opens up and deploys into a 2.7m cubical display booth complete with integral power and network connections. The kiosk was designed using a solid modeler, from which data was extracted to drive digital manufacturing processes. Owing to the well-developed understanding of Kit-of-parts Theory and the new "kinematic architecture" principles, the paperless process yielded a working prototype only eight weeks after initial conceptualization. The paper concludes with a discussion of how these concepts can be applied to large-scale projects and design processes.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	554e
authors	Koutamanis, Alexander
year	2001
title	3 x 2 Approaches to Design Management
doi	https://doi.org/10.52842/conf.ecaade.2001.220
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 220-225
summary	Following the arguably successful introduction of building, project and real estate management to traditional architectural areas, design management is emerging as the new hot issue. One of the main arguments for it is the alleged low performance of the architect in the face of the technical complexity and operational intricacy that characterizes current design problems. In this respect, management is seen as the missing link in the architect’s methodical and operational framework. The paper suggests that this link derives more from the constraints of the domain and its subject matter rather than a management perspective. Design management refers to two main dimensions of architectural design, these of design method and of design subject. With respect to the first dimension we distinguish between three main categories: proscriptive, prescriptive and descriptive approaches. In the second dimension the distinction is between the coordination of the design process and that of the design product. The 3x2 matrix defined by these two dimensions stresses the significance of descriptive approaches for the informatization of the representation and communication of the design product. In this framework design information management emerges as an applied area of (computational) design theory that facilitates the amphidrome development of a design, i.e. not only from brief to postoccupancy but also from detail, case and precedent to design idea and solution, as well as the identification and management of critical moments, i.e. moments characterized by convergence of activities and hence extensive and intensive communication.
keywords	Method, Management, Descriptive, Informatization
series	eCAADe
email
last changed	2022/06/07 07:51

_id	48db
authors	Proctor, George
year	2001
title	CADD Curriculum - The Issue of Visual Acuity
doi	https://doi.org/10.52842/conf.ecaade.2001.192
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 192-200
summary	Design educators attempt to train the eyes and minds of students to see and comprehend the world around them with the intention of preparing those students to become good designers, critical thinkers and ultimately responsible architects. Over the last eight years we have been developing the digital media curriculum of our architecture program with these fundamental values. We have built digital media use and instruction on the foundation of our program which has historically been based in physical model making. Digital modeling has gradually replaced the capacity of physical models as an analytical and thinking tool, and as a communication and presentation device. The first year of our program provides a foundation and introduction to 2d and 3d design and composition, the second year explores larger buildings and history, the third year explores building systems and structure through design studies of public buildings, fourth year explores urbanism, theory and technology through topic studios and, during the fifth year students complete a capstone project. Digital media and CADD have and are being synchronized with the existing NAAB accredited regimen while also allowing for alternative career options for students. Given our location in the Los Angeles region, many students with a strong background in digital media have gone on to jobs in video game design and the movie industry. Clearly there is much a student of architecture must learn to attain a level of professional competency. A capacity to think visually is one of those skills and is arguably a skill that distinguishes members of the visual arts (including Architecture) from other disciplines. From a web search of information posted by the American Academy of Opthamology, Visual Acuity is defined as an ability to discriminate fine details when looking at something and is often measured with the Snellen Eye Chart (the 20/20 eye test). In the context of this paper visual acuity refers to a subject’s capacity to discriminate useful abstractions in a visual field for the purposes of Visual Thinking- problem solving through seeing (Arnheim, 1969, Laseau 1980, Hoffman 1998). The growing use of digital media and the expanding ability to assemble design ideas and images through point-and-click methods makes the cultivation and development of visual skills all the more important to today’s crop of young architects. The advent of digital media also brings into question the traditional, static 2d methods used to build visual skills in a design education instead of promoting active 3d methods for teaching, learning and developing visual skills. Interactive digital movies provide an excellent platform for promoting visual acuity, and correlating the innate mechanisms of visual perception with the abstractions and notational systems used in professional discourse. In the context of this paper, pedagogy for building visual acuity is being considered with regard to perception of the real world, for example the visual survey of an environment, a site or a street scene and how that visual survey works in conjunction with practice.
keywords	Curriculum, Seeing, Abstracting, Notation
series	eCAADe
email
last changed	2022/06/07 08:00

_id	4dd3
authors	Reymen, Isabelle M.M.J.
year	2001
title	Improving design processes through structured reflection : a domain-independent approach
source	Eindhoven University of Technology
summary	In the world of designing, three fields of attention can be recognised, namely design research, design practice, and design education. Gaps exist between these three fields. In this thesis about designing, the focus is on the gap between design research and design practice. Design practice includes many design disciplines and an increasing number of multidisciplinary teams. Main problems in design practice are the communication between designers with a different background and the integration and co-ordination of important aspects during a design process. By tackling these problems, the effectiveness and efficiency of design processes in practice can be improved. The study of similarities and differences between design processes in several design disciplines and the development of support for reflection on design processes are topics that can improve design practice and that deserve more attention in design research. The goal of my research is to decrease the gap between design research and design practice in order to improve design processes. Reflection on design processes can help designers to improve their design process, its results, and the designer’s proficiency: By reflecting explicitly on the current design situation and on the performed design activities, in a systematic way and on a regular basis, designers can plan next design activities that can be performed effectively and efficiently given the design goal at that moment. In this thesis, the combination of systematic and regular reflection is called structured reflection. To improve design processes in various design disciplines in practice, the study of similarities and differences between design processes in several disciplines can be useful. Similarities between design processes are the basis for domain-independent design knowledge (as distinguished from domain-specific design knowledge). To reach the goal of my research, I have chosen to combine, in a broad explorative study, the development of support for structured reflection on design processes and the development of domain-independent design knowledge. This thesis describes a domain-independent approach to improve design processes through structured reflection. My research process can be summarised as follows. I studied three design disciplines, namely architecture, mechanical engineering, and software engineering. To get input from design practice, I did qualitative empirical research: I performed twelve case studies in the three disciplines to inventory characteristics of design processes and I compared the cases for similarities and differences. The similarities, together with the results of a literature study, have been the basis for the development of domain-independent descriptive design knowledge. The developed descriptive knowledge, in turn, formed the basis for developing domain-independent prescriptive design knowledge. At the end of the project, I confronted all results with design practice to get feedback on the results in another empirical study and I performed a literature study to position the results in the design literature. My design philosophy and design frame are the descriptive results developed to answer the first research question, namely “How to describe design processes in a domain-independent way?”. My design philosophy is a set of domain-independent concepts and terms for describing a design process. The concepts and terms are based on an application of the general theory of state-transition systems to the context of designing; the concepts of state and state transition correspond to the main concepts of design situation and design activity in my design philosophy. The answer to the first research question given by the design philosophy is refined in a design frame: The design frame offers a means to structure the description of a design process in a domain-independent way. Major structuring concepts of the design frame are dimensions and subjects. I define three dimensions, namely level, perspective, and time. These dimensions define a three-dimensional space, called a positioning space, in which important aspects of design processes can be positioned. A positioning space must be defined for each subject, being the three parts of a design situation: the product being designed, the design process, and the design context. My design frame is a domain-independent structure formed by the combination of the three dimensions for each subject. My design method is the prescriptive result developed to answer the second research question, namely “How to support structured reflection on design processes in a domain-independent way?”. My design method is a domain-independent aid that offers designers support for reflecting on design processes in a structured way. Reflection on design processes is defined as an introspective contemplation on the designer’s perception of the design situation and on the remembered design activities. A reflection process is described as a process that consists of three steps that are called preparation, image forming, and conclusion drawing. The design method is based on two main concepts: The first concept is the systematic description and analysis of design situations and design activities by means of forms and checklists; only systematic support for the preparation step of a reflection process is developed. The second concept is the idea of design sessions, introduced to stimulate designers to reflect regularly during a design process. A design session is defined as a period of time during which one or more designers are working on a subtask of a certain design task, for example, one afternoon, a whole day, or a week. Both concepts are combined to support structured reflection on design processes. The complete design method consists of five steps for each design session, namely planning a design session, defining the subtask of the design session, reflecting at the beginning of a design session, designing during the core of a design session, and reflecting at the end of a design session. A prototype software tool, called ECHO, has been developed to explore the benefits of using a software system to facilitate the use of the design method. Together, the design philosophy and the design frame offer concepts, a vocabulary, and a structure to describe design processes in a domain-independent way. The design method is a first proposal of a method that supports structured reflection on design processes. My results are thus possible answers to the mentioned research questions and are starting points to improve the effectiveness and efficiency of design processes. Based on the feedback I collected, I am optimistic about the applicability of my results in design practice. By asking input from design practice and by developing results that are useful for design practice and that contribute to design research, I contribute to decrease the gap between design research and design practice. The most important recommendations for further research are to test all results extensively in design practice and to investigate how to apply the results in design education.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	461e
authors	Serrentino, R.H., Molina, H. and Cano, S.
year	2001
title	FORMAS TRIDIMENSIONALES INNOVADORAS: ARQUITECTURA BASADA EN LA TEORÍA DE NUDOS (Innovative Three-Dimensional Forms: Architecture Based on the Theory of Knots)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 89-91
summary	The theory of knots is a branch of mathematics that is in charge of studying the topological behaviour of lineal entities configuring forms in three-dimensional space. Starting from their spatial character it is possible to establish correspondences with three-dimensional forms of architectural use, constituting a stimulative tool of creativity. The objectives of this work consist on analysing how to enlarge the possibilities of computers aided architectural design (CAAD) from the theory of knots, classifying forms of knots of architectural use and developing a design procedure of architectural shapes, emphasizing concepts of structure, path and form.
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	8c88
authors	Tweed, Christopher
year	2001
title	Highlighting the affordances of designs. Mutual realities and vicarious environments
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 681-696
summary	Computer-aided evaluation of predicted design performance is an enduring theme within CAAD research and practice. However, most evaluative systems address aspects of design that are readily amenable to formal or quantitative treatments. Analyses of how people use and interact with designs rarely progress beyond a narrow functionalism, in which ‘the user’ figures as a type with poorly defined needs and characteristics. This paper outlines a theory of actor-environment interaction based on Gibson’s notion of affordance as a precursor to exploring how computers can be used to highlight the affordances of designs. Two simple prototypes are described. The main conclusion is that while computers are unlikely to be able to detect affordances, they can generate and present information in ways that will enable human designers to appreciate more fully the possible implications of their designs for a broader range of potential occupants.
keywords	Affordances, Human-Environment Interaction, Design Evaluation, Agents
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	avocaad_2001_14
id	avocaad_2001_14
authors	Adam Jakimowicz
year	2001
title	Non-Linear Postrationalisation: Architectural Values Emergence in a Teamwork Interpretation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The paper presents the outcomes of the experiment being conducted at the Faculty of Architecture in Bialystok, which derives form three main sources: a new course of architectural composition by computer modelling, developed and conducted in Bialystok postrationalisation as a formulation platform for new architectural values and theories, applied by e.g. Bernard Tschumi the idea of new values emergence resulting form a teamwork, when placed in an appropriate environment; It is assumed that the work performed first intuitively, can be later seriously interpreted, and to some extent rationalised, verbalised, described. With no doubt we can state, that in creative parts of architectural activities, very often decision are taken intuitively (form design). So this ‘procedure’ of postrationalisation of intuitively undertaken efforts and results seems to be very important –when trying to explain ideas. This kind of activity is also very important during the first years of architectural education. In case of this experiment, the students’ works from the course of architectural composition are taken as a base and subjects for interpretation, and values research. However, when at first, individual works are being interpreted by their authors, at the latter stage, the teams are to be formed. The aim of the teamwork is to present individual works, analyse them, find common value(s), and represent it (them) in an appropriate, creative way. The ideal environment to perform this work is hypertext based internet, because the non-linearity of team interpretations is unavoidable. On the other hand, the digital input data (computer models) is a very appropriate initial material to be used for hypermedia development. The experiment is to analyse the specific of the following: the self-influence of the group on the individual work ‘qualification’, mutual influence of the team members on their own work interpretation, the influence of the digital non-linear environment on the final outcome definition. The added value of hypertext in architectural groupwork digital performance shall be examined and described. A new value of individualised, though group based, non-linearity of expression will be presented and concluded.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	1445
authors	Caldas, L. and Rocha, J.
year	2001
title	A generative design system applied to Sizaís school of architecture at Oporto
doi	https://doi.org/10.52842/conf.caadria.2001.253
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 253-264
summary	A new generative design system based on a genetic algorithm is tested within the framework of Alvaro Sizaís School of Architecture at Oporto, Portugal. The system works over a detailed three-dimensional description of the building and uses natural lighting and overall environmental performance as objective functions to guide the generation of solutions. This paper researches the encoding of architectural design intentions into the system, using constraints derived from Sizaís original design. Experiments using this generative system were performed on three different geographical locations to test the algorithmís capability to adapt solutions to different climatic characteristics within the same language constraints.
series	CAADRIA
last changed	2022/06/07 07:54

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	avocaad_2001_06
id	avocaad_2001_06
authors	Giovanni De Paoli
year	2001
title	Architectural design and procedural models - A radical change of language to design in architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The history of architecture and its teaching clearly reveal how representations of the image and drawing have changed over centuries. Today, computers are increasingly found at the desks of architecture professionals and students, but their usage remains restricted to technical functions and what is commonly known as CAD (computer-assisted design), in architecture is often simply the other CAD (computer-assisted drawing).This presentation deals with architectural design, particularly at its earliest stage. Our objective is to propose a model for describing the architectural concept that meets the needs of architects through software. Only then will they really be able to use computers as an aid to design by overcoming the obstacles that presently keep us from making full use of them.This has led me to propose an avenue of exploration that examines projection through an object’s properties, and a method of computer-assisted design that makes use of procedural models. These procedural models consist of geometric operators and operators that define the properties, characteristics and performance of a building — operators which I have termed “semantic”.This research fits into a paradigm that leads to representation of the building through functions that can be called with parameters and encapsuled in an algorithm, making it possible to create procedural models that assist with the design. This approach opens up a means of integrating the logos with the figurative representation where drawing is used instead of words to convey the architectural concept.The example of a procedural model shows how we can use a generic model to produce a volume model with all the characteristics belonging to the same family of objects. This type of model can serve not only to illustrate the result of a process, or to draw connections among buildings on the basis of their construction process, or to test the validity of a rule typical of a set of objects, but also to integrate, through a functional language, semantic operators which to date have been excluded from the initial design phase. This descriptive mechanism is extremely powerful in making it possible to establish relationships among the functions and properties of a building and the purpose of the architectural project.The scientific contribution of this research is to test the hypothesis that we can use computer tools to manipulate operators which enable the architect to reappropriate a complex design of the building, and open up new lines of investigation into integrating geometric and knowledge-based systems into a unified representation. The declarative approach for creating three-dimensional scenes fits into this perspective.It is now a matter of exploring the possibility of working on a “common morphology” shared by everyone involved in the design process by rewriting the functions or by converting the functions used for representation, or else through a functional dialect (language) that allows for dialectic relationships among all types of operators and the actions of the protagonists in the architectural design process.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	3c71
authors	Maver, Tom and Petric, Jelena
year	2001
title	MEDIA in MEDIATION Prospects for Computer Assisted Design Participation
source	Stellingwerff, Martijn and Verbeke, Johan (Eds.), ACCOLADE - Architecture, Collaboration, Design. Delft University Press (DUP Science) / ISBN 90-407-2216-1 / The Netherlands, pp. 121-134 [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	One of the most consistent, powerful and philosophical ideas which has run like a silk thread through the short and erratic history of the development of computer aided architectural design is that of user participation in the design decision-making process. It is not an idea with which the architectural profession is particularly comfortable but it is, the authors claim, one which is central to the professional ethic and, therefore, to be its ultimate survival. Design decision-making is, if addressed properly, a hugely, complex multi-variate, multi-person process on which precious little serious research has been focused. In the late 1960's the Design Methods Group in the USA and the Design Research Society in the UK formulated paper-based models of the design process and anticipated, in some regards with un-nerving accuracy, the way in which the application of information technologies would impinge beneficially on the process of design decision-making and, therefore, on the quality of the built environment. One concept expressed at that time was as follows: the application of computers to the modelling and prediction of the cost and performance behaviour of alternative design solutions allows subjective value judgements to be better informed and more explicitly audited, and that such subjective value judgements should be made by those most affected by them, i.e. the future owners and users of buildings. This paper is devoted to the critical re-examination of this concept, on the seminal research and development which has kept the notion alive over 30 years, and, how the current advances in multimedia, virtual reality and internet access make its ubiquitous adoption inevitable: in short, Media in Mediation.
series	other
email
last changed	2003/04/16 11:52

_id	4b5f
authors	Pang, King Wah
year	2001
title	A Process planning and Optimization System for Laminated Object Manufacturing Application
source	Hong Kong University of Schience and Technology (People’s Republic of China)
summary	Rapid Prototyping (RP) technologies have emerged as a powerful set of manufacturing technologies in recent years. While these technologies invariably provide tremendous time-savings over traditional methods of manufacture of design prototypes, many are still quite inefficient. This thesis examines two ideas; first, that these processes can be optimized greatly by using better process planning; second, that several of these RP technologies use similar core planning technologies for optimization. The first hypothesis is verified in this thesis by presenting an improved process planning system for one RP technology, Laminated Object Manufacturing (LOM). The framework proposes the use of computational geometry and optimization tools at two levels to reduce process time and material wastage. Geometric techniques are used for process planning at the 3D part level. A genetic algorithm (GA) based path optimization technique is used for path planning optimization at the layer level. The second observation led to the development of an open architecture planning system for a host of RP technologies. A test-bed software system is described in this thesis. Evaluation on the performance of the new methodology is also provided. The methodologies developed can work equally well with the current industry standard STL format for storing object CAD data as well as direct slice data computed from the exact solid model of a part.
keywords	Industrial Engineering; Mechanical Engineering
series	thesis:PhD
last changed	2003/02/12 22:37

_id	2dba
id	2dba
authors	Tasli, S
year	2001
title	WHAT DOES COMPUTER AIDED DESIGN OFFER FOR PRODUCING LIVABLE BUILDINGS IN THE 21ST CENTURY?
source	Proceedings of the Livable Environments and Architecture International Congress (LIVENARCH 2001). July 4-7, 2001, Trabzon, Turkey, pp. 278-282.
summary	Designing livable buildings has always been a major concern for architects but they are often criticized on account of failing in this aim. However, this is not only due to the ignorance of the designers, but also of the complexity of the factors that are essential to design but difficult to incorporate the design process. Buildings are shaped and occupied under several dynamically changing conditions and paper-based media and conventional Computer Aided Design (CAD) tools are inefficient in representing them. This paper aims to discuss the changing role of digital media for architectural design in response to the increasing complexity of design processes. Some proposals, supported by recent technological innovations, are suggested for the future and they are compared with the conventional uses of CAD. It is claimed that in the 21st century, the main advantage of using computers will be to dynamically simulate buildings in time in highly visualized virtual environments to evaluate the future performance of proposed designs. The design model will not only look as if it were real, but it will also “behave” as if it were real so as to provide dynamic and intelligent response. The two key technologies for the development of such modeling, virtual reality and object-oriented programming are addressed and four promising application areas for near future (evaluation of user-building interaction, visualization of environmental factors, construction scheduling, and combined CAD-GIS) are discussed. Some important considerations for the development of dynamically simulated virtual models are analyzed and suggestions are made for further research.
keywords	Architectural Design, Dynamic Simulation, and Virtual Environments
series	other
type	normal paper
email
last changed	2005/12/01 16:02

_id	3645
authors	Tsou, Jin-Yeu
year	2001
title	Strategy on applying computational fluid dynamic for building performance evaluation
source	Automation in Construction 10 (3) (2001) pp. 327-335
summary	Predicting and evaluating building performance plays an important role in the training of responsible architects. Building performance includes issues such as: structural stability, acoustic quality, natural lighting, thermal comfort, and ventilation and indoor air quality. These types of analyses are often laborious, non-intuitive, and non-graphical. As a result, these important issues do not arouse the enthusiasm of architecture students or building professionals. The Chinese University of Hong Kong (CUHK) research team proposes to explore and develop a long-term strategy to apply scientific visualization on teaching and research in environmental technology and building performance. This paper presents the development process and results of research projects for applying computational fluid dynamics (CFD) on building performance evaluation. CFD On-line Teaching project's aim is to develop a web-based training course for architecture students to apply CFD simulation on design problem solving. Each lesson not only illustrates basic principles regarding airflow in the building design, it also contains CFD sample files with predefined flow cells for students to test different concepts. GiLin Temple project's aim is to apply CFD simulation on investigating the wind resistance of Tong Dynasty heavy timber structure. Airflow information generated in the project includes the visual representation of the pressure distribution and velocity field on all slices through the temple, and the tracking of particles as they flow around or through a building. The China housing residential airduct study focuses on simulating the indoor airflow regarding the airduct design of China Experimental Urban Housing Scheme. The visual representation of the pressure distribution and velocity field in the airducts provides vital information for helping China Housing Research Center improve the current design.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	viswa
id	viswa
authors	Viswanadha,Kameshwari
year	2001
title	Digital Charrette: A Web Based Tool to Supplement the Admission Procedure to Graduate Architectural Degree Programs
source	Texas A&M University
summary	The NAAB (National Architectural Accrediting Board Inc.), as an evaluator of architectural education in the United States has established both graduate architectural curriculum criteria and student performance criteria expected to be fulfilled by the student at the time of graduation. To fulfill these standards set by the NAAB, the graduate selection committees of architecture schools require the ability to predict graduate design studio performance of the applicants. The high percentage of international applicants suggests the necessity of a standardized evaluation tool. This research presents a standardized web based testing environment titled Digital Charrete‚ that would contribute towards the fair evaluation of applicants to graduate architectural degree programs. Spatial ability is related to Design and Visualization skills‚, a part of the NAAB criteria, and also associated with design studio performance of architecture students. The Digital Charrette is a VRML environment within which spatial exercises are administered. It is designed to supplement the current admission procedure, and would enable the selection of students with greater potential to perform well in graduate architectural design studios. This research is also an attempt to understand the implications of using virtual three-dimensional environments for such testing purposes. The ability of this web based tool to predict student performance in architectural design studios is investigated. Finally, the user reactions to testing in a virtual three-dimensional environment and timed tasks are included in this study. Analysis of the results showed that the test takers thought the Digital Charrette was a good evaluator of their spatial ability. The study population showed a preference for paper-based media in the pre-task analysis. A huge percentage of the study population found the Digital Charrette Œfun to do‚ and Œchallenging‚. The major drawback of this study was that the VRML environment was unable to render itself for testing purposes in a way that the medium would not hinder the test takers‚ performance. This may also be considered a cause for a relatively smaller percentage of success amongst test takers. The study population however unanimously considered the concept of the Digital Charrette, i.e. testing in virtual environments, significant to evaluation of architecture students.
keywords	Architectural Education
series	thesis:MSc
email
last changed	2003/12/06 08:18

_id	cf2007_585
id	cf2007_585
authors	Fischer, Thomas
year	2007
title	Enablement or Restriction? On supporting others in making (sense of things)
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 585-598
summary	In this paper I present and reflect upon a five-year investigation of designing digital tools for designing in the area of architectural space grid structures. I understand design as a novelty and knowledge generating conversational process as described by Pask (see Scott 2001) and Glanville (2000). Furthermore, I regard making design tools as a design task in itself, rendering this paper a reflection on designing for designing. This paper gives a report on observations I made during the toolmaking study, and subsequently contextualizes these observations using second-order cybernetic theory. This reflection focuses on different relationships between observers and systems, on conditions under which observers construct knowledge and on limits of supporting others in this activity.
series	CAAD Futures
email
last changed	2007/07/06 12:47

For more results click below: