Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 716

Reformat results as: short short into frame detailed detailed into frame

_id	cfd8
authors	Kolarevic, Branko
year	2001
title	Digital Fabrication Manufacturing Architecture in the Information Age
source	ACADIA Quarterly, vol. 20, pp. 10-12
doi	https://doi.org/10.52842/conf.acadia.2001.010
summary	The basic premise of this graduate-level elective course, offered for the first time in the spring of 2001, is that the Information Age, like the Industrial Age before it, is challenging not only how we design buildings, but also how we manufacture and construct them. The guiding notion was that the generative and creative potential of digital media, together with manufacturing advances already attained in automotive, aerospace and shipbuilding industries, is opening up new dimensions in architectural design by allowing production and construction of very complex forms that were until recently very difficult and expensive to design, produce, and assemble using traditional construction technologies. The proposition was that the consequences of these changes are likely to be profound, as new digitally driven processes of design, fabrication and construction are increasingly challenging the historic relationship between architecture and its means of production.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	81b8
authors	Kolarevic, Branko
year	2001
title	Digital Fabrication: Manufacturing Architecture in the Information Age
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 268-278
doi	https://doi.org/10.52842/conf.acadia.2001.268
summary	This paper addresses the recent digital technological advances in design and fabrication and the unprecedented opportunities they created for architectural design and production practices. It investigates the implications of new digital design and fabrication processes enabled by the use of rapid prototyping (RP) and computer-aided manufacturing (CAM) technologies, which offer the production of small-scale models and full-scale building components directly from 3D digital models. It also addresses the development of repetitive non-standardized building systems through digitally controlled variation and serial differentiation, i.e. mass-customization, in contrast to the industrial-age paradigms of prefabrication and mass production. The paper also examines the implications of the recent developments in the architectural application of the latest digital design and fabrication technologies, which offer alternatives to the established understandings of architectural design and production processes and their material and economic constraints. Such critical examination should lead to a revised understanding of the historic relationship between architecture and its means of production.
keywords	Digital Fabrication, Computer-Aided Manufacturing, Digital Construction
series	ACADIA
email
last changed	2022/06/07 07:51

_id	3826
authors	Kolarevic, Branko
year	2001
title	Designing and Manufacturing Architecture in the Digital Age
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 117-123
doi	https://doi.org/10.52842/conf.ecaade.2001.117
summary	The paper describes and examines the implications of the recent developments in the architectural application of the latest digital design and fabrication technologies, which offer alternatives to the established understandings of architectural design and production processes and their material and economic constraints. It offers a possibility of a revised understanding of the historic relationship between architecture and its means of production.
keywords	Digital Design, Digital Fabrication, CAD/CAM
series	eCAADe
email
last changed	2022/06/07 07:51

_id	9a44
authors	Kolarevic, Branko
year	2001
title	MANUFACTURING DIGITAL ARCHITECTURES (Manufacturing Digital Architecture)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 278-281
summary	This paper addresses recent digital technological advances in design and fabrication and the unprecedented opportunities they created for architectural practices by allowing design, fabrication and construction of very complex forms that were until recently very difficult and expensive to design, produce, and assemble using traditional construction technologies. The paper also addresses the development of repetitive non-standardized building systems through digitally controlled variation and serial differentiation, i.e. mass-customization, in contrast to the industrial-age paradigms of prefabrication and mass production.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	3322
authors	Klinger, Kevin R.
year	2001
title	Making Digital Architecture: Historical, Formal, and Structural Implications of Computer Controlled Fabrication and Expressive Form
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 239-244
doi	https://doi.org/10.52842/conf.ecaade.2001.239
summary	Digital output from computer modeling represents a significant new method for visualization and fabrication of architecture. The ability to move directly from three-dimensional modeling to real three-dimensional output challenges the need for traditional means of representation such as plan, section, etc. Moreover, the necessity for conversion of architectural intentions into a code (construction documents, shop drawings, etc.) to be translated by the contractor will also be tested with these new potentials in fabrication. This subjugation of traditional forms of representation and fabrication has serious implications for architectural design process and production. The intention of this paper is to scrutinize underlying issues inherent in a design process of developing architectural solutions using the computer both as a tool for threedimensional visualization as well as for guiding three-dimensional fabrication. Precedent of historic expressive architectural form (seen through the lens of fabrication) will be presented to lay the foundation for the examination of new fabrication techniques and structural concerns for computer generated expressive forms. A series of rapid prototype studies from a digital architecture seminar will also be analyzed to outline the need for developing visualization/fabrication process ideas and research into methods for making digital architecture.
keywords	Expressive Form, Digital Visualization, Digital Fabrication, Rapid Prototyping, Five-Axis Milling
series	eCAADe
email
last changed	2022/06/07 07:51

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ascaad2004_paper12
id	ascaad2004_paper12
authors	Al-Qawasmi, Jamal
year	2004
title	Reflections on e-Design: The e-Studio Experience
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	The influence of digital media and information technology on architectural design education and practice is increasingly evident. The practice and learning of architecture is increasingly aided by and dependant on digital media. Digital technologies not only provide new production methods, but also expand our abilities to create, explore, manipulate and compose space. In contemporary design education, there is a continuous demand to deliver new skills in digital media and to rethink architectural design education in the light of the new developments in digital technology. During the academic years 2001-2003, I had the chance to lead the efforts to promote an effective use of digital media for design education at Department of Architecture, Jordan University of Science and Technology (JUST). Architectural curriculum at JUST dedicated much time for teaching computing skills. However, in this curriculum, digital media was taught in the form of "software use" education. In this context, digital media is perceived and used mainly as a presentation tool. Furthermore, Computer Aided Architectural Design and architectural design are taught in separate courses without interactions between the two.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	caadria2010_043
id	caadria2010_043
authors	Barker, Tom and M. Hank Haeusler
year	2010
title	Urban digital media: facilitating the intersection between science, the arts and culture in the arena of technology and building
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 457-466
doi	https://doi.org/10.52842/conf.caadria.2010.457
summary	The research presented in this paper investigates ways of providing better design applications for technologies in the field of Urban Digital Media (UDM). The work takes an emergent approach, evolving a design strategy through the early engagement of stakeholders. The paper discusses research in a design-led creative intersection between media technology, culture and the arts in the built environment. The case study discusses opportunities for the enhancement of a university campus experience, learning culture and community, through the provision of an integrated digital presence within campus architecture and urban spaces. It considers types of information architecture (Manovich, 2001) and designs for use in urban settings to create communication-rich, advanced and interactive designed spaces (Haeusler, 2009). The presented research investigates how to create a strategy for display technologies and networked communications to transform and augment the constructed reality of the built environment, allowing new formats of media activity.
keywords	Urban design; outdoor digital media; information architecture; multidisciplinary design; augmented reality; media facades
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	22ec
authors	Bechthold, Martin
year	2001
title	Complex shapes in wood: Computer-aided design and manufacture of wood-sandwich roof shells
source	Harvard University
summary	Computer-Aided-Design, Engineering and Manufacturing (CAD/CAE/CAM) technology has changed the way consumer products, automobiles or airplanes are designed and made. The emerging applications for CAD/CAE/CAM technology in architecture, and the way this technology impacts how we design and construct the built environment, are yet unclear. This thesis investigates the relation between advanced digital design tools and the making of physical objects by focusing on an exemplary architectural element—wooden roof shells. The research objective is to expand the scope of architectural design through the application of CAD/CAE/CAM technology rather than to use this technology to streamline existing processes. The thesis develops a specific technical solution that allows the design and manufacture of new types of wooden roof shells. These are complexly shaped multifunctional construction elements that are manufactured off-site. Based on the close connection between digital design tools and the new Computer-Numerically-Controlled manufacturing process the author proposes a theoretical model of shared digital environments for collaborative design in architecture. The proposed manufacturing process treats wood as a modern composite material. Thin wood strips and foams combine into structural sandwich panels that can then be joined into a roof shell. The geometrically complex panels are generated by a combination of subtractive Computer-Numerically-Controlled machining processes and manual work. Infrastructure elements can be embedded into the sandwich build-up in order to enhance the functionality of the roof as a building envelope. Numerical tools are proposed that allow the determination of manufacturing-related parameters in the digital design environment. These inform the architectural and structural design in the early design phases. The digital collaborative design environment is based on a shared parametric solid model and an associated database. This collectively owned, feature-based design model is employed throughout the design and manufacturing process and constitutes the means of concurrent design coordination of all participants. The new manufacturing process for wood/foam sandwich shells is verified by designing and manufacturing prototypes. Design guidelines and a cost estimation are presented as the practical basis for architects and engineers to incorporate new types of roof shells into architectural projects.
keywords	Architecture; Agriculture; Wood Technology; Design and Decorative Arts
series	thesis:PhD
last changed	2003/02/12 22:37

_id	117a
authors	Bermudez, J., Agutter, J., Westenskow, D., Zhang, Y., Foresti, S., Syroid, N., Lilly, B., Strayer, D., Drews, F. and Gondeck-Becker, D.
year	2001
title	LA ARQUITECTURA DE REPRESENTACION DE DATOS. DISEÑO ARQUITECTONICO APLICADO A LA VISUALIZACION EN ANESTESIOLOGIA (The Architecture of Data Representation. Architectonical Design Applied to the Visualization in Anestesiology)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 135-138
summary	This paper presents the architectural process and products that are being employed in an ongoing multidisciplinary research in anesthesiology. The project’s goal is to develop a new data representation technology to visualize physiologic information in real time. Using physiologic data, 3-D objects are generated in digital space that represent physiologic changes and show functional relationships that aid in the detection, diagnosis, and treatment of critical events. Preliminary testing results show statistically significant reduction in detection times. The research outcome, potential, and the NIH grant supporting the team’s scientific methods demonstrate the contributions that architecture offers to the growing field of data visualization.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	36f5
authors	Burry, M., Burry, J. and Faulí, J.
year	2001
title	Sagrada Família Rosassa: Global Computeraided Dialogue between Designer and Craftsperson (Overcoming Differences in Age, Time and Distance)
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 076-086
doi	https://doi.org/10.52842/conf.acadia.2001.076
summary	The rose window (‘rosassa’ in Catalan) recently completed between the two groups of towers that make up the Passion Façade of Gaudí’s Sagrada Família Church in Barcelona measures eight metres wide and thirty-five metres in height [Figure 1]. There were four phases to the design based in three distinct geographical locations. The design was undertaken on site, design description in Australia some eighteen thousand kilometres distant, stone-cutting a thousand kilometres distant in Galicia, with the completion of the window in March 2001. The entire undertaking was achieved within a timeframe of fifteen months from the first design sketch. Within this relatively short period, the entire team achieved a new marriage between architecture and construction, a broader relationship between time-honoured craft technique with high technology, and evidence of leading the way in trans-global collaboration via the Internet. Together the various members of the project team combined to demonstrate that the technical office on site at the Sagrada Família Church now has the capacity to use ‘just-in-time’ project management in order to increase efficiency. The processes and dialogues developed help transcend the tyranny of distance, the difficult relationship between traditional craft based technique and innovative digitally enhanced production methods, and the three generational age differences between the youngest and more senior team members.
keywords	Digital Practice, Global Collaboration, Rapid Prototyping
series	ACADIA
email
last changed	2022/06/07 07:54

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
doi	https://doi.org/10.52842/conf.caadria.2010.443
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	04f2
authors	Cimerman, Benjamin
year	2001
title	Clients, architects, houses and computers: Experiment and reflection on new roles and relationships in design
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 100-109
doi	https://doi.org/10.52842/conf.acadia.2001.100
summary	This paper reports on recent work that focused on the potential impact of standard computer technology on the relationship between client and architect in the context of residential design. A study of software applications a client could use to develop and evaluate ideas exposed the dearth of software available for the design of spatial complexity by individuals without advanced computer skills, and led to the design of a specific piece of software we call “Space Modeler.” It was prototyped using off-the-shelf virtual reality technology, and tested by a group of freshmen students. The paper discusses the specificities of the software and provides analysis and reflection based on the results of the test, both in terms of design artifacts and users’ comments. The paper concludes that the evolution of the interface to electronic environments is a matter of interest for those concerned with rethinking the training, role and activity of the architect. In the near future prospective homeowners may be able to experience and experiment with the space of their home before it is built. How can the profession embrace new information technology developments and appropriate them for the benefits of society at large?
keywords	Design Software, Design Participation, Visualization, Simulation
series	ACADIA
email
last changed	2022/06/07 07:52

_id	3320
authors	Cinelis, G., Kazakeviciute, G. and Januskevicius, E.
year	2001
title	Modeling and energy analysis of buildings based on integrated CAD – models in tuition of CAAD
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 138-143
doi	https://doi.org/10.52842/conf.ecaade.2001.138
summary	The first implementation of the system MEA for building spatial and structural modeling and energy analysis using integrated graphical digital models in tuition of architecture students is being described. Working at different design stages and with various types of models the aim was to deliver the understanding of CAD tools as intelligent rather than pure technical ones.
keywords	3D Modeling Of Buildings Integrated Digital Graphical Models, Energy Analysis, Variant Design
series	eCAADe
last changed	2022/06/07 07:52

_id	5d15
authors	Clayton, M.J., Song, Y., Han, K., Darapureddy, K., Al-Kahaweh, H. and Soh, I.
year	2001
title	Data for Reflection: Monitoring the Use of Web-Based Design Aids
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 142-152
doi	https://doi.org/10.52842/conf.acadia.2001.142
summary	Web technology provides a new way of generating information about design processes. By monitoring student use of Web-based design aids, it is possible to collect empirical, quantitative evidence regarding the time and sequence of activities in design. The research team has undertaken several software development projects to explore these concepts. In one project, students can use a Web browser running alongside CAD software to access a cost database and evaluate their designs. In a second project, students use a browser to record their time expenditures. They can better document, plan and predict their time needs for a project and better manage their efforts. In a third project, students record the rationale supporting their design decisions. The information is stored in databases and HTML files and is hyperlinked into the CAD software. Each tool provides facilities to record key information about transactions. Interactions are documented with student identification, time of activity, and kind of activity. The databases of empirical information tracking student activity are a unique substantiation of design process that can feed back into teaching and the creation of ever better design tools.
keywords	Design Methods, Empirical, Web, Cost Estimating, Time Management
series	ACADIA
email
last changed	2022/06/07 07:56

_id	9960
authors	Cuberos, R., Indriago, J.A. and Villalobos, E.
year	2001
title	INFOCENTRO ESPECIALIZADO EN ARQUITECTURA Y DISEÑO (Infocenter Specialized in Architecture and Design)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 120-123
summary	This paper relates any experiences on the creation of a digital information center about architecture, urban planning, and graphic design in Zulia University (Maracaibo, Venezuela). Guidelines are detailed, also activities and achievements of this “info center”, and technical specifications about their equipments, their two kinds of storage (centralized and distributed) for their two access ways (telemetric access by http also simple intranet access by MS Windows Terminal Server). Compilation, classification, and presentation methods of multimedia information are explained in order to evaluate current limitations and future potentialities of this digital center.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	24d2
authors	Da Costa Silva, Heitor
year	2001
title	MODELOS: FORMA E CONFORTO NA ARQUITETURA (Models: Form and Environment in Architecture)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 51-53
summary	The work presents a research project in its first phase of implementation. The research project deals with the manufacturing of architectural models which use new technology, for thermal and lighting investigation and using one heliodon as means of building assessment. The models to be produced will be chosen from built examples of the Modern Architecture of the XX Century. Initially virtual models will be constructed and afterwards the models will be printed in 3D. Once the three dimensional models were built they will be examined in one heliodon to evaluate their thermal and light performance. Also the models will be used as means of calibrating the heliodon itself. Lately the models will be incorporate as building examples for projects museum.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	8aef
authors	Dave, Bharat
year	2001
title	Immersive Modeling Environments
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 242-247
doi	https://doi.org/10.52842/conf.acadia.2001.242
summary	The paper describes development of a large-format panoramic display environment. Unlike the ‘window-on-the-world’ metaphor associated with small displays, immersive environments foster a sense of ‘being-in-the-world’. That raises a question: Which aspects of human-computer interaction and information perception scale up or change substantially from small displays to immersive environments? The paper first describes implementation of our display environment, projects being explored in it, and motivates a focused research agenda. Finally, the paper describes an experiment to study differences in spatial judgments by subjects while working in traditional and immersive environments.
keywords	Immersive Modeling, Interaction, Perception, Information Abstractions, Navigation
series	ACADIA
email
last changed	2022/06/07 07:55

_id	bbfa
authors	Donath, D., Beetz, J., Grether, K., Petzold, F. and Seichter, H.
year	2001
title	Augmented Reality Techniques for Design and Revitalisation in Existing Built Environments
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 322-329
doi	https://doi.org/10.52842/conf.acadia.2001.322
summary	Building activity in Germany is moving increasingly toward combined newbuild and renovation projects. Essential for effective computer-aided planning within an existing context is not only the use of on-site computer-aided measurement tools but also an integrative cooperation between the different disciplines involved via an information and communication system. Interdisciplinary cooperation needs to be tailored to the integrative aspects in renovation and revitalisation work. Economic factors determine the viability of an architectural project, and reliable costing information is vital. Existing IT-approaches to this problem are not yet sufficiently exploited. In ongoing research at our university (collaborative research center ”Materials and Structure in the Revitalisation of Buildings”) methods and techniques of revitalisation are being investigated. A special branch of the collaborative research center is investigating possibilities of computer-aided building measurement and communication platforms for professional disciplines (www.uni-weimar.de/sfb). The aim is to develop a general approach to the revitalisation of buildings. This paper discusses possible application areas of AR/VR techniques in the revitalisation of buildings from the point of view of the user and are based on the real project “Cooling factory Gera”. Based on the necessities of revitalisation projects, technical requirements are developed. The project is funded by the Deutsche Forschungsgesellschaft (DFG).
keywords	Augmented Reality, Architecture, Modernization, Measurement
series	ACADIA
email
last changed	2022/06/07 07:55

For more results click below: