Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 716

Reformat results as: short short into frame detailed detailed into frame

_id	f95f
authors	Angulo, A.H., Davidson, R.J. and Vásquez de Velasco, G.P.
year	2001
title	Digital Visualization in the Teaching of Cognitive Visualization
doi	https://doi.org/10.52842/conf.acadia.2001.292
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 292-301
summary	Professional design offices claim that our graduates have difficulties with their free-hand perspective drawing skills. This fact, which has become obvious over the last 5 years, is parallel to a clear tendency towards the use of 3-dimensional digital imagery in the projects of our students. Frequently, faculty tends to blame the computer for the shortcomings of our students in the use of traditional media, yet there is no clear evidence on the source of the blame. At a more fundamental level, the visualization skills of our students are questioned. This paper will explain how faculty teaching design communication techniques, with traditional and digital media, are working together in the development of a teaching methodology that makes use of computers in support of our student’s training on cognitive visualization skills, namely; “The Third-Eye Method”. The paper describes the Third-Eye Method as an alternative to traditional methods. As evidence of the benefits offered by the Third-Eye Method, the paper presents the results of testing it against traditional methods among freshman students. At the end, the paper draws as conclusion that computers are not the main source of the problem but a potential solution.
keywords	Pedagogy, Visualization, Media
series	ACADIA
email
last changed	2022/06/07 07:54

_id	b269
authors	Vásquez de Velasco, G., Davison, R. and Angulo, A.H.
year	2001
title	EL TERCER OJO: METODOLOGIA DE ENTRENAMIENTO EN VISUALIZACIÓN COGNOSCITIVA (The Third Eye: Metodology for the Training in Cognitive Visualization)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 213-215
summary	The purpose of this paper is to show the results of a collaborative effort between faculty who are involved in teaching design communications in such a way as to develop the students’ cognitive visualization skills yet incorporating the computer as partner in this training. The paper describes what will be called “The Third Eye Method”, an alternative to traditional methods, which has been tested against traditional methods among freshman students. The findings suggest that computer usage is not in itself the source of the visualization problems that students appear to be having, but the solution to the problem.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	sigradi2009_903
id	sigradi2009_903
authors	Harris, Ana Lúcia Nogueira de Camargo
year	2009
title	O Uso da Técnica dos "Planos em Série" com o Desenvolvimento da Computação Gráfica - Uma Experência Didática [The Use of the 'Serial Plan' Technique with the Development of the Computer Graphic - A Teaching Experience]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper is about comparative didactic experiences where the “Serial plan Technique” defined by Wong (1998), was applied in 2001 and 2008 which computer resources from that time. In 2001 this technique was applied with the help of AutoCAD for generation of the planifications, but in 2008 the appliances of AutoCAd and Sketch Up were used for the virtual construction of objects. The quality of the results showed a didactic potential and an increasement in the possible creative rhythm, mainly because the facility of the three-dimensional virtual visualization and because the speed in the physical execution of the created project.
keywords	didactic experiences; serial plan technique; CAD; AutoCAD; Skecht Up
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	6e80
authors	Pratini, Edison and Faleiro, Jeovan
year	2001
title	UMA NOVA METODOLOGIA DE APOIO À VISUALIZAÇÃO NO ENSINO DE DESENHO TÉCNICO E GEOMETRIA DESCRITIVA (A New Methodology of Support for Visualization in Technical Graphics and Descriptive Geometry)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 201-203
summary	This work presents an experiment on the use of new computer graphics, virtual reality and Internet to help students of Technical Drawing and Descriptive Geometry courses at the University of Brasilia, Brazil. After some trials of teaching with the help of CAD and 3D modeling software, when developed an animated and interactive web-site. The idea behind the creation of the site was to avoid the book metaphor, i.e., to put figures and text for the student to read, but take advantage of the animation and interaction resources of current computers. It is not a distance course, but only a site to complement classes and help visualization. The site can be seen at www.desenho.hpg.com.br.
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	sigradi2003_076
id	sigradi2003_076
authors	Armesto, Tristán
year	2003
title	Producción Digital de un Auditorio (Digital Production of an Auditorium)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	In the middle of the year 2001, we had the opportunity to project an Auditory in the particular building of our School of Architecture. The chance to produce the entire project an all the technical documentation was given; using only digital tools. The use of this tools let us to calculate illumination, isolation study, sound an thermical conditioning with a real time visualization of the three dimensional model.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf9f
authors	Basso, Andrea and Cattelán, Ma. Eugenia
year	2001
title	PATRIMONIO. SU VISUALIZACION DESARROLLOS INFORMÁTICOS COMO HERRAMIENTAS PARA LA SISTEMATIZACIÓN DE INFORMACIÓN, VISUALIZACIÓN Y CONSULTAS DEL PATRIMONIO URBANO Y ARQUITECTÓNICO. (Patrimony. Its Visualization. Developments in Computing as a Tool for the Systematization of Information, Visualization and Consultations of the Urban and Architectural Patrimony)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 40-42
summary	Two specific applications were developed in order to elaborate a database to consider the demands for the architectural and urbanistic patrimony inventory of Rosario, and to allow for the link with other city databases. One of these is to enter information and to make layers of different kinds of categories of buildings and groups of them. The other application facilitates the viewing and the performance of interrogations from different accesses. It is possible to visualize specific buildings with theirs details and to produce general maps showing different levels of information, such as buildings with patrimonial value that have definite degree of protection, or those belongs to the same category, etc, according to the special inquiry carried out.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	117a
authors	Bermudez, J., Agutter, J., Westenskow, D., Zhang, Y., Foresti, S., Syroid, N., Lilly, B., Strayer, D., Drews, F. and Gondeck-Becker, D.
year	2001
title	LA ARQUITECTURA DE REPRESENTACION DE DATOS. DISEÑO ARQUITECTONICO APLICADO A LA VISUALIZACION EN ANESTESIOLOGIA (The Architecture of Data Representation. Architectonical Design Applied to the Visualization in Anestesiology)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 135-138
summary	This paper presents the architectural process and products that are being employed in an ongoing multidisciplinary research in anesthesiology. The project’s goal is to develop a new data representation technology to visualize physiologic information in real time. Using physiologic data, 3-D objects are generated in digital space that represent physiologic changes and show functional relationships that aid in the detection, diagnosis, and treatment of critical events. Preliminary testing results show statistically significant reduction in detection times. The research outcome, potential, and the NIH grant supporting the team’s scientific methods demonstrate the contributions that architecture offers to the growing field of data visualization.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	04f2
authors	Cimerman, Benjamin
year	2001
title	Clients, architects, houses and computers: Experiment and reflection on new roles and relationships in design
doi	https://doi.org/10.52842/conf.acadia.2001.100
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 100-109
summary	This paper reports on recent work that focused on the potential impact of standard computer technology on the relationship between client and architect in the context of residential design. A study of software applications a client could use to develop and evaluate ideas exposed the dearth of software available for the design of spatial complexity by individuals without advanced computer skills, and led to the design of a specific piece of software we call “Space Modeler.” It was prototyped using off-the-shelf virtual reality technology, and tested by a group of freshmen students. The paper discusses the specificities of the software and provides analysis and reflection based on the results of the test, both in terms of design artifacts and users’ comments. The paper concludes that the evolution of the interface to electronic environments is a matter of interest for those concerned with rethinking the training, role and activity of the architect. In the near future prospective homeowners may be able to experience and experiment with the space of their home before it is built. How can the profession embrace new information technology developments and appropriate them for the benefits of society at large?
keywords	Design Software, Design Participation, Visualization, Simulation
series	ACADIA
email
last changed	2022/06/07 07:52

_id	f9d8
authors	De Valpine, John and Black, Benjamin
year	2001
title	Physically Based Daylight Simulation and Visualization
doi	https://doi.org/10.52842/conf.acadia.2001.406
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 406-407
summary	While architects typically agree that daylight is a powerful influence for design, architects rarely collect and use daylighting data to help make informed design decisions. This deficiency exists partially because there are no common tools available to provide useful and accessible data. The objective of this project is to provide accurate daylighting data of a prominent urban building site and present it in a clear way so that the architects can make well informed design decisions that respond to site daylighting conditions and improve architectural performance. An urban 3D computer model was created with AutoCad, a commercial CAD application. Daylight was simulated with Radiance, the physically based rendering engine developed at Lawrence Berkeley National Laboratory. The standard CIE model for clear sky and sun was used to produce over 500 images that represent daylight conditions for three different times of year at 10 minute intervals in both luminance and illuminance formats. The simulation data was packaged for analysis with a unique browser tool that enables the architect to easily cycle through the data to evaluate and compare behavior by time of day and by season. The architect can also toggle between luminance and illuminance format to easily visualize both qualitative and quantitative data. The exploration and use of the simulation data can be applied with sensitivity to inform the design and decision making process for the exterior building site.
series	ACADIA
last changed	2022/06/07 07:55

_id	e4a7
authors	Espina B., Jane J.
year	2001
title	La tecnologia digital en las edificaciones arquitectonicas de la modernidad [The Digital Tecnology In Modern Architectural Constructions]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 136-145
summary	This paper gives an overview of the experience developed by Computer Graphics II course of department of Communication in School of Architecture and Design of University of Zulia which was initiated since 1999.The work describes the methodology used by two groups of objectives: general of the course and those generated by experiences in two levels: one as analysis instruments and the other one during process of design. Course is looking for trainning in CAD system uses by 3D representation of modern buildings, so at the end of the experience students were succeed : 1) analysis of projects of modern architecture, 2) quick visualization and efficient volumetric representation, 3) make a digital format library of differents buildings of the city and 4) comprehension and historic knowledge of city. CAD systems used for representation of 2d and 3D drawings offer to architects tools as color, textures, shadows, plus generation of different points of view as isometrics, perspectives and realistic representations. The digital format of the selected buildings gives to drafts an additional value.
keywords	Modern Architecture; Three-Dimensional; Realistic Representation; CAD Systems; Digital Format
series	other
email
last changed	2003/02/14 08:29

_id	3c96
authors	Kang, H., Anderson, S.D. and Clayton, M.J.
year	2001
title	Web4D: Challenges and Practices for Construction Scheduling
doi	https://doi.org/10.52842/conf.acadia.2001.132
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 132-141
summary	Research has demonstrated that four-dimensional computer aided design (4D CAD), in which a three-dimensional (3D) CAD model is animated through time, is useful in helping professionals understand the construction schedule. However, cumbersome processes to update a 4D CAD model, which involve changing geometry representations, changing schedules and bar charts, linking the geometry to the scheduling information, and generating animations, may discourage professionals from using 4D CAD in actual construction projects. A software prototype implementing 4D CAD in a Web environment overcomes limitations of current 4D CAD tools. This software permits editing of the construction schedule over the Internet and shows the revised construction sequence visually on a Web browser using 3D computer graphics. This software is composed of a database on a server, Active Server Pages (ASP) scripts, and a Java applet that was developed using Java 3D Application Programming Interface (API) and Java JDBC. The Java applet retrieves the 4D model at the appropriate level of completion over the Internet and allows users to navigate around the model on the Web browser. Web4D visualization software can help professionals to expedite the schedule updating process by involving designers and constructors in collaborative decision- making.
keywords	Web4D, 4D CAD, 4D Visualization, Construction Schedule, Internet
series	ACADIA
email
last changed	2022/06/07 07:52

_id	3322
authors	Klinger, Kevin R.
year	2001
title	Making Digital Architecture: Historical, Formal, and Structural Implications of Computer Controlled Fabrication and Expressive Form
doi	https://doi.org/10.52842/conf.ecaade.2001.239
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 239-244
summary	Digital output from computer modeling represents a significant new method for visualization and fabrication of architecture. The ability to move directly from three-dimensional modeling to real three-dimensional output challenges the need for traditional means of representation such as plan, section, etc. Moreover, the necessity for conversion of architectural intentions into a code (construction documents, shop drawings, etc.) to be translated by the contractor will also be tested with these new potentials in fabrication. This subjugation of traditional forms of representation and fabrication has serious implications for architectural design process and production. The intention of this paper is to scrutinize underlying issues inherent in a design process of developing architectural solutions using the computer both as a tool for threedimensional visualization as well as for guiding three-dimensional fabrication. Precedent of historic expressive architectural form (seen through the lens of fabrication) will be presented to lay the foundation for the examination of new fabrication techniques and structural concerns for computer generated expressive forms. A series of rapid prototype studies from a digital architecture seminar will also be analyzed to outline the need for developing visualization/fabrication process ideas and research into methods for making digital architecture.
keywords	Expressive Form, Digital Visualization, Digital Fabrication, Rapid Prototyping, Five-Axis Milling
series	eCAADe
email
last changed	2022/06/07 07:51

_id	625d
authors	Liapi, Katherine A.
year	2001
title	Geometric Configuration and Graphical Representation of Spherical Tensegrity Networks
doi	https://doi.org/10.52842/conf.acadia.2001.258
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 258-267
summary	The term “Tensegrity,” that describes mainly a structural concept, is used in building design to address a class of structures with very promising applications in architecture. Tensegrity structures are characterized by almost no separation between structural configuration and formal or architectural expression (Liapi 2000). In the last two decades structural and mechanical aspects in the design of these structures have been successfully addressed, while their intriguing morphology has inspired several artists and architects. Yet, very few real world applications of the tensegrity concept in architecture have been encountered. The geometric and topological complexity of tensegrity structures that is inherent to their structural and mechanical basis may account for significant difficulties in the study of their form and their limited application in building design. In this paper an efficient method for the generation of the geometry of spherical tensegrity networks is presented. The method is based on the integration of CAD tools with Descriptive Geometry procedures and allows designers to resolve and visualize the complex geometry of such structures.
keywords	Tensegrity Networks, Visualization, Geometric Configuration
series	ACADIA
email
last changed	2022/06/07 07:59

_id	174d
authors	Maher, M.L., Simoff, S., Gu, N. and Lau, K.H.
year	2001
title	A virtual office
source	M. Burry (ed.), Cyberspace: The World of Digital Architecture, Images Publishing, Mulgrave, Vic, pp. 196-199
summary	The Virtual Office design provides an environment in a threedimensional virtual worl, in which a person, as an avatar, works alone or holds meetings with others. Two aspects of the design emphasize the "virtual": the walls and the allocation of areas. The design assumes that the walls of a virtual office provide a visual boundary to the place that indicates what is inside and what is outside the office. The functions of the wall include security, privacy, and a place for hanging things. The threedimensional visualization of the wall as a frame with cubes was inspired by the paintings of Piet Mondriaan. The design has five functional areas that are distinct, in order to provide a sense of movement when moving from one type of task to another.
series	other
email
last changed	2003/04/23 15:50

_id	9c19
authors	Maher, M.L., Simoff, S., Gu, N. and Lau, K.H.
year	2001
title	Virtual conference centre
source	M. Burry (ed.), Cyberspace: The World of Digital Architecture, Images Publishing, Mulgrave, Vic, pp. 192-195
summary	The Virtual Conference Facilities design is part of the Virtual Campus, which comprises several rooms, hallways, and resource areas. The rooms include facilities for slide projection, recording, and softbots. The three-dimensional visualization of the rooms assumes that an avatar can walk or teleport from one place to another, The design style is a derivation of the Virtual Office design, using similar framelike walls and distinctive activity areas. The facility has three main rooms: the entrance hall, the conference room, and the practice studio. The use of rooms is determined on the basis of activity and conversation privacy, since the main purpose of the facility is to provide a place for people to meet. A person can hear anyone else in the some room talk but cannot hear someone in another room.
series	other
email
last changed	2003/04/23 15:50

_id	2905
authors	Pereira, Gilberto Corso
year	2001
title	Urban Information Visualization - The Salvador project
doi	https://doi.org/10.52842/conf.ecaade.2001.517
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 517-521
summary	Before popularity of GIS a map is a tool with two basic functions - storage of spatial data and presentation of spatial information. Now, a digital database store spatial data and cartographic visualization is how spatial information usually is presented. Recent technological development applied to visualization area can increase analyse and interpretation capacity of professionals concern with urban planning, design and management. In other hand, many professionals and students involved with urban studies are not familiar with GIS software and this can limit casual users to access urban databases. One solution is to build software that allows direct visualization of spatial information based in users needs and knowledge. The project discussed in this paper introduces a computer application structured like a hypermedia atlas using concepts from cartographic modelling. The city of Salvador is represented by a model based in a combination of maps, and others images. User composes visualization.
keywords	Visualization, Hypermedia, GIS, Urban Information, Digital Atlas
series	eCAADe
email
last changed	2022/06/07 08:00

_id	739d
authors	Pereira, Gilberto Corso
year	2001
title	PROJETO SALVADOR: INTERATIVIDADE E ANIMAÇÃO NA ANÁLISE DO ESPAÇO URBANO (The Salvador Project: Interaction and Animation in the Urban Space Analysis)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 319-321
summary	The project discussed here wants to investigate the use of multimedia as a tool to present and to analyze geographical information by making a interactive software for visualization and understanding of urban space of Salvador using thematic cartography, animations, remote sense images, photography and texts, allowing software user to build his personal cartographic visualization.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	6a02
id	6a02
authors	Tan, Beng-Kiang
year	2001
title	Visualizing Building Occupancy Pattern on Campus
doi	https://doi.org/10.52842/conf.acadia.2001.398
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 398-404
summary	This paper addresses the problem of information opacity that planners and university administrators have when they have multiple sets of data that are not interconnected and how these data can be visualized. The visualization of building occupancy pattern on campus is used as an example to illustrate how this general problem can be addressed through a database driven effective visualization that supports decision-making. This paper proposes a solution using web-based 3D Virtual Reality Modeling Language (VRML) animation dynamically generated from a database and describes a prototype in progress. The prototype displays a broad overview of building occupancy patterns across campus through 3D animation of occupancy over time. From the overview, users can navigate further to find out the details of occupancy throughout the day for specific buildings on campus.
keywords	Visualization, VRML, Animation, Campus Population, Information Visualization
series	ACADIA
email
last changed	2022/06/07 07:56

_id	2dba
id	2dba
authors	Tasli, S
year	2001
title	WHAT DOES COMPUTER AIDED DESIGN OFFER FOR PRODUCING LIVABLE BUILDINGS IN THE 21ST CENTURY?
source	Proceedings of the Livable Environments and Architecture International Congress (LIVENARCH 2001). July 4-7, 2001, Trabzon, Turkey, pp. 278-282.
summary	Designing livable buildings has always been a major concern for architects but they are often criticized on account of failing in this aim. However, this is not only due to the ignorance of the designers, but also of the complexity of the factors that are essential to design but difficult to incorporate the design process. Buildings are shaped and occupied under several dynamically changing conditions and paper-based media and conventional Computer Aided Design (CAD) tools are inefficient in representing them. This paper aims to discuss the changing role of digital media for architectural design in response to the increasing complexity of design processes. Some proposals, supported by recent technological innovations, are suggested for the future and they are compared with the conventional uses of CAD. It is claimed that in the 21st century, the main advantage of using computers will be to dynamically simulate buildings in time in highly visualized virtual environments to evaluate the future performance of proposed designs. The design model will not only look as if it were real, but it will also “behave” as if it were real so as to provide dynamic and intelligent response. The two key technologies for the development of such modeling, virtual reality and object-oriented programming are addressed and four promising application areas for near future (evaluation of user-building interaction, visualization of environmental factors, construction scheduling, and combined CAD-GIS) are discussed. Some important considerations for the development of dynamically simulated virtual models are analyzed and suggestions are made for further research.
keywords	Architectural Design, Dynamic Simulation, and Virtual Environments
series	other
type	normal paper
email
last changed	2005/12/01 16:02

For more results click below: