Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 703

Reformat results as: short short into frame detailed detailed into frame

_id	7313
authors	Mahdavi, A., Brahme, R. and Gupta, S.
year	2001
title	Performance-based computational design via differential modeling and two-staged mapping
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 667-680
summary	Computational performance-based building design support faces a conflict. It is important to provide building performance feed back to the designer as early as possible in the design process. But many aspects of building performance are significantly affected by the design of the building’s technical systems, which are typically configured in detail only in the later stages of design. The challenge is thus to find a method to use detailed simulation tools even during the early stages of design when values for many of the variables for the building’s technical sub-systems are not yet available. In this paper, we demonstrate how this problem can be partially solved by combining two levels of automation. The first level consists of differential building representation involving a number of domain (application-specific) object models that are derived from a shared object model automatically. The second level uses generative agents that create reference designs for the technical sub-systems of the building. To demonstrate the feasibility of the proposed approach, we use the building energy systems domain (heating, cooling, ventilation, and air-conditioning) as a case in point.
keywords	Building Performance Simulation, Homology-Based Mapping, Intelligent Design Agents
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	0767
authors	Ries, Robert and Mahdavi, Ardeshir
year	2001
title	Evaluation of Design Performance through Regional Environmental Simulation
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 629-642
summary	Computational building simulation tools have historically viewed buildings as artefacts isolated and disconnected from their contexts. At most, the external environmental conditions have been viewed as outside influences or stressors encapsulated in, for example, weather files for energy simulation or sky models for lighting simulation. In the field of environmental assessment, life cycle analysis (LCA) has followed a similar path of isolating the artefact under analysis from its context. Modeling the building artefact as a participant in multiple contexts over time so that the interactions and dependencies between the regions and the building can be adequately explored in the design process requires support for the modeling of regional areas, as well as the artefact and the related life cycle processes. Using computational design and evaluation tools can provide the computing capability required for effective design decision support. This paper presents the implementation of the affordance impact assessment method and the regional environmental simulation in Ecologue. Ecologue is the computational tool for life cycle environmental impact assessment in the SEMPER integrated building design and simulation system. Ecologue contains a building model and an environmental model. The building model is automatically derived from the shared building model of the SEMPER system. The environmental model is a combination of a representation of the processes and emissions occurring in the life cycle of buildings and an impact assessment model. The impact assessment model is a combination of a context model of the physical characteristics of a region and a sub-regional fate and transport model based on the fugacity concept.
keywords	Environmental Simulation, Design Decision Support, Life Cycle Analysis
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	3320
authors	Cinelis, G., Kazakeviciute, G. and Januskevicius, E.
year	2001
title	Modeling and energy analysis of buildings based on integrated CAD – models in tuition of CAAD
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 138-143
doi	https://doi.org/10.52842/conf.ecaade.2001.138
summary	The first implementation of the system MEA for building spatial and structural modeling and energy analysis using integrated graphical digital models in tuition of architecture students is being described. Working at different design stages and with various types of models the aim was to deliver the understanding of CAD tools as intelligent rather than pure technical ones.
keywords	3D Modeling Of Buildings Integrated Digital Graphical Models, Energy Analysis, Variant Design
series	eCAADe
last changed	2022/06/07 07:52

_id	7e02
authors	Elger, Dietrich and Russell, Peter
year	2002
title	The Virtual Campus: A new place for (lifelong) learning?
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 472-477
doi	https://doi.org/10.52842/conf.ecaade.2002.472
summary	472 eCAADe 20 [design e-ducation] Modeling Real and Virtual Worlds Session 13 In the early spring of 2001 a collection of German universities founded a virtual faculty of architecture, which was named „Liquid Campus“. Current thinking about future forms of education in the field of architecture combined with over 4 years of experience with net-based design studios, led to questions about the future of existing universities, their buildings and their use. This problem was put to 43 students in the form of a design exercise to create a place for a virtual university. In the current situation, in which the administration of knowledge is more and more located on the internet, and even the so-called meeting places themselves can be virtualised through the help of video-conference-software, the exercise was to design a virtual campus in the framework and to carry out this design work in a simulation of distributed practice. Initial criticism of the project came from the students in that exemplary working methods were not described, but left for the students to discover on their own. The creation of a concept for the Liquid Campus meant that the participants had to imagine working in a world without the face to face contacts that form the basis (at present) of personal interaction. Additionally, the assignment to create or design possible links between the real and the virtual was not an easy task for students who normally design and plan real physical buildings. Even the tutors had difficulties in producing focused constructive criticism about a virtual campus; in effect the virtualisation of the university leads to a distinctive blurring of its boundaries. The project was conducted using the pedagogical framework of the netzentwurf.de; a relatively well established Internet based communication platform. This means that the studio was organised in the „traditional“ structure consisting of an initial 3 day workshop, a face to face midterm review, and a collective final review, held 3,5 months later in the Museum of Communication in Frankfurt am Main, Germany. In teams of 3 (with each student from a different university and a tutor located at a fourth) the students worked over the Internet to produce collaborative design solutions. The groups ended up with designs that spanned a range of solutions between real and virtual architecture. Examples of the student’s work (which is all available online) as well as their working methods are described. It must be said that the energy invested in the studio by the organisers of the virtual campus (as well as the students who took part) was considerably higher than in normal design studios and the paper seeks to look critically at the effort in relation to the outcomes achieved. The range and depth of the student’s work was surprising to many in the project, especially considering the initial hurdles (both social and technological) that had to overcome. The self-referential nature of the theme, the method and the working environment encouraged the students to take a more philosophical approach to the design problem. The paper explores the implications of the student’s conclusions on the nature of the university in general and draws conclusions specific to architectural education and the role of architecture in this process.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	3501
authors	Wang, Shengwei and Zheng, Ling
year	2001
title	Dynamic and real-time simulation of BMS and air-conditioning system as a `living' environment for learning/training
source	Automation in Construction 10 (4) (2001) pp. 487-505
summary	Dynamic and real-time simulation models are developed to simulate the thermal, hydraulic, mechanical, environmental and energy performance of building a variable air volume (VAV) air-conditioning system and its building management system (BMS). On-line direct digital control (DDC) and supervisory strategies of the BMS controlling the dynamic air-conditioning system are simulated. A window-based users interface is developed to simulate the man–machine interface of a BMS, through which users can monitor the on-line operation, tune the local control loops, and reset the supervisory control strategies. This paper presents models, simulation software, and examples that users practice on the simulated on-line BMS and air-conditioning system using the software.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	avocaad_2001_13
id	avocaad_2001_13
authors	Alexander Koutamanis
year	2001
title	Modeling irregular and complex forms
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Computational technologies provide arguably the first real opportunity architectural design has had for a comprehensive description of built form. With the advent of affordable computer-aided design systems (including drafting, modeling, visualization and simulation tools), architects believe they can be in full control of geometric aspects and, through these, of a wide spectrum of other aspects that are implicit or explicit in the geometric representation. This belief is based primarily on the efficiency and effectiveness of computer systems, ranging from the richness and adaptability of geometric primitives to the utility of geometric representations in simulations of climatic aspects. Such capabilities support attempts to design and construct more irregular or otherwise complex forms. These fall under two main categories: (1) parsing of irregularity into elementary components, and (2) correlation of the form of a building with complex geometric structures.The first category takes advantage of the compactness and flexibility of computational representations in order to analyse the form of a design into basic elements, usually elementary geometric primitives. These are either arranged into simple, unconstrained configurations or related to each other by relationships that define e.g. parametric relative positioning or Boolean combinations. In both cases the result is a reduction of local complexity and an increase of implicit or explicit relationships, including the possibility of hierarchical structures.The second category attempts to correlate built form with constraints that derive usually from construction but can also be morphological. The correlation determines the applicability of complex geometric structures (minimally ruled surfaces) to the description of a design. The product of this application is generally variable in quality, depending upon the designer's grounding in geometry and his ability to integrate constraints from different aspects in the definition of the design's geometry.Both categories represent a potential leap forward but are also equally hampered by the rigidity of the implementation mechanisms upon which they rely heavily. The paper proposes an approach to making these mechanisms subordinate to the cognitive and technical aspects of architectural thinking through fuzzy modeling. This way of modeling involves a combination of (a) canonical forms, (b) tolerances around canonical forms and positions, (c) minimal and maximal values, (d) fuzzy boundaries, and (e) plastic interaction between elements based on the dual principles of local intelligence and autonomy. Fuzzy models come therefore closer to the intuitive manners of sketching, while facilitating transition to precise and complex forms. The paper presents two applications of fuzzy modeling. The first concerns the generation of schematic building layouts, including adaptive control of programmatic requirements. The second is a system for designing stairs that can adapt themselves to changes in their immediate environment through a fuzzy definition of geometric and topological parametrization.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_05
id	avocaad_2001_05
authors	Alexander Koutamanis
year	2001
title	Analysis and the descriptive approach
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The rise of consciousness concerning the quality of working and living conditions has been a permanent though frequently underplayed theme in architecture and building since the reconstruction period. It has led to an explosive growth of programmatic requirements on building behaviour and performance, thus also stimulating the development of design analysis. The first stage of development was characterized by the evolution of prescriptive systems. These reversed the structure of pre-existing proscriptive systems into sequences of known steps that should be taken in order to achieve adequate results. Prescriptive systems complemented rather than replaced proscriptive ones, thereby creating an uncertain mixture of orthodoxy and orthopraxy that failed to provide design guidance for improving design performance and quality.The second stage in the development of design analysis focuses on descriptive methods and techniques for analyzing and supporting evaluation. Technologies such as simulation and scientific visualization are employed so as to produce detailed, accurate and reliable projections of building behaviour and performance. These projections can be correlated into a comprehensive and coherent description of a building using representations of form as information carriers. In these representations feedback and interaction assume a visual character that fits both design attitudes and lay perception of the built environment, but on the basis of a quantitative background that justifies, verifies and refines design actions. Descriptive analysis is currently the most promising direction for confronting and resolving design complexity. It provides the designer with useful insights into the causes and effects of various design problems but frequently comes short of providing clear design guidance for two main reasons: (1) it adds substantial amounts of information to the already unmanageable loads the designer must handle, and (2) it may provide incoherent cues for the further development of a design. Consequently the descriptive approach to analysis is always in danger of been supplanted by abstract decision making.One way of providing the desired design guidance is to complement the connection of descriptive analyses to representations of form (and from there to synthesis) with two interface components. The first is a memory component, implemented as case-bases of precedent designs. These designs encapsulate integrated design information that can be matched to the design in hand in terms of form, function and performance. Comparison between precedents with a known performance and a new design facilitate identification of design aspects that need be improved, as well as of wider formal and functional consequences. The second component is an adaptive generative system capable of guiding exploration of these aspects, both in the precedents and the new design. The aim of this system is to provide feedback from analysis to synthesis. By exploring the scope of the analysis and the applicability of the conclusions to more designs, the designer generates a coherent and consistent collection of partial solutions that explore a relevant solution space. Development of the first component, the design case-bases, is no trivial task. Transformability in the representation of cases and flexible classification in a database are critical to the identification and treatment of a design aspect. Nevertheless, the state of the art in case-based reasoning and the extensive corpus of analysed designs provide the essential building blocks. The second component, the adaptive generative system, poses more questions. Existing generative techniques do not possess the necessary richness or multidimensionality. Moreover, it is imperative that the designer plays a more active role in the control of the process than merely tweaking local variables. At the same time, the system should prevent that redesigning degenerates into a blind trial-and-error enumeration of possibilities. Guided empirical design research arguably provides the means for the evolutionary development of the second component.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2178
authors	Chevrier, C. and Perrin, J.P.
year	2001
title	Interactive 3D reconstruction for urban areas. An image based tool
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 753-765
summary	Urban applications (for example arrangement, new buildings, virtual sightseeing and walkthrough) require a three dimensional (3D) geometrical model of town areas. However, most of them do not need an accurate model of reality. Such model would occupy a considerable memory space and would be too slow to handle. Architects, urban designers and civil engineers can find in our tool a medium to conceive their projects. Some types of software exist but they do not correspond exactly to our needs. Consequently we have conceived and developed an interactive tool for virtual 3D rough reconstruction of buildings. The software development has been performed in the Maya environment (ALIAS Wavefront) with C++ language and MEL (Maya Embedded Language). A constraint we set for ourselves was the use of only light devices (for easy transportation) at low price (everybody can buy such devices). The principle is to overlay on the scanned photograph of the area we want to deal with, the two dimensional (2D) cadastral plan displayed from the same viewpoint as the picture. Then each building body can be extruded from its ground polygon and the roof can be created from what the user sees on the picture. A constraint is the flatness of the polygonal surfaces. Our application context was the town of Nancy in France for which some areas have been reconstructed. Some pictures have been used as textures for polygonal surfaces, giving more reality effect to the simulation.
keywords	Geometrical Modelling, Architecture, Urban Area, Virtual Visit
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	7ff9
authors	Choi, J.-W., Lee, H.-S., Hwang, J.-E. and Kim, M.-J.
year	2001
title	The Wooden Construction data modeling of korean traditional architecture - Focused on the structure of Gongpo in Buseoksa MuRyangsujun
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 265-274
doi	https://doi.org/10.52842/conf.caadria.2001.265
summary	Finding national identities from its traditional heritages might be an important research issue especially for Asian architects and researchers. Nevertheless, it is noticed that the structure of Korean traditional architecture has not been fully explored in a systematical or computational manner and its information is not shared efficiently. This study thus explores a computational way of structuring construction knowledge and building information of Korean traditional architecture.Ý To do this, we select a well-known old temple building, Buseoksa Muryangsujun, one of the oldest Buddhist temple in Korea, as a prototype. We first build an accurateÝ three-dimensional model of the building with an aid of a traditional building expert, categorize its building components, and then analyze their connectivity and the connectivity patterns and rules by especially focusing on the capital order system, called Gongpo. The result of the study shows several schema diagrams representing the wooden construction data model carefully designed for an intelligent building simulation and generative system that will be developed in the near future.Ý The paper also demonstrates a way of computationally describing some shape grammars that explain the components' connectivity.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	f9d8
authors	De Valpine, John and Black, Benjamin
year	2001
title	Physically Based Daylight Simulation and Visualization
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 406-407
doi	https://doi.org/10.52842/conf.acadia.2001.406
summary	While architects typically agree that daylight is a powerful influence for design, architects rarely collect and use daylighting data to help make informed design decisions. This deficiency exists partially because there are no common tools available to provide useful and accessible data. The objective of this project is to provide accurate daylighting data of a prominent urban building site and present it in a clear way so that the architects can make well informed design decisions that respond to site daylighting conditions and improve architectural performance. An urban 3D computer model was created with AutoCad, a commercial CAD application. Daylight was simulated with Radiance, the physically based rendering engine developed at Lawrence Berkeley National Laboratory. The standard CIE model for clear sky and sun was used to produce over 500 images that represent daylight conditions for three different times of year at 10 minute intervals in both luminance and illuminance formats. The simulation data was packaged for analysis with a unique browser tool that enables the architect to easily cycle through the data to evaluate and compare behavior by time of day and by season. The architect can also toggle between luminance and illuminance format to easily visualize both qualitative and quantitative data. The exploration and use of the simulation data can be applied with sensitivity to inform the design and decision making process for the exterior building site.
series	ACADIA
last changed	2022/06/07 07:55

_id	e6c5
authors	Heintz, John L.
year	2001
title	Coordinating virtual building design teams
source	Stellingwerff, Martijn and Verbeke, Johan (Eds.), ACCOLADE - Architecture, Collaboration, Design. Delft University Press (DUP Science) / ISBN 90-407-2216-1 / The Netherlands, pp. 65-76 [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	Most research in design project management support systems treats the subject as an isolated objective problem. The goals to be met are defined in terms of a supposed universal view of the project, and now outside concerns are taken into account. While such approaches, including project simulation, may yield excellent results, they ignore what, for many projects, are the real difficulties. Design projects are not isolated. All participants have other obligations that compete with the given project for attention and resources. The various participants in the design process have different goals. For these reasons it is proposed that design project management can be best facilitated by tools which assist the participating actors to share suitable management information in order to make better co-ordination possible, while allowing the resource balancing between projects to occur in private. Such a tool represents the design project management task as a negotiation task that spans both projects and firms; the management of one project is the management of all. The model of design collaboration upon which the Design Coordination System (DeCo) is built was developed from 1) a heuristic case study used to gain insight into the ways in which designers co-ordinate their efforts, and 2) the application of the theory of the social contract as developed by John Rawls to the problem of design project management. The key innovation in the DeCo system is the shaping of the project management system around existing practices of collaborative project design management and planning. DeCo takes advantage of how designers already co-ordinate their work with each other and resolve disputes over deadlines and time lines. The advantage of DeCo is that it formalises these existing practices in order to accommodate both the increasing co-ordination burden and the difficulties brought about by the internationalisation of design practice. DeCo, the design project management system proposed here, provides a representation, a communications protocol, and a game theoretical decision structure. The combination of these three units provides users with the ability to exchange structured pictures of the project as seen from the points of view of individual actors. Further, it suggests a mechanism based on a specific principle of fairness for arriving at mutually acceptable project plans. The DeCo system permits the users freedom to manage their design processes as they will, while providing a basic compatibility between practices of design team members which supports their collaborative efforts to co-ordinate their design work.
series	other
last changed	2001/09/14 21:30

_id	7c0e
authors	Koutamanis, Alexander and Den Hartog, Peter
year	2001
title	Simulation and representation. Learning from airflow analyses in buildings
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 657-666
summary	The simulation of environmental aspects is a current priority in design research and practice. The availability of relatively efficient and reliable simulation systems and the emphasis on environmental aspects throughout a building’s lifecycle combine to stimulate exploration of aspects such as lighting and air quality by computational means. Nevertheless, a frequent complaint is that the addition of such simulations makes design information processing timeconsuming and cumbersome, thereby increasing uncertainty and indecision. Therefore, it is imperative that simulation is integrated in the strategies and tools normally used by the digitally-minded architect. In this respect a central issue is the relations between the simulation and the design representation used as connecting tissue for the whole design environment. Input of design information in the simulation means identification of relevant objects, aspects, parts and properties of these objects, as well as relationships between objects. The explicit description of objects such as spaces, doors and windows in the design representation allows for ready extraction of relevant information, including automatic recognition of relationships such as adjacency between a window and a space. The addition of information specific to the airflow analysis was resolved by the extension of the representation to cover front-end service components such as inlets and outlets and general properties (annotations) such as activities accommodated in a space and the primary choice of cooling and heating subsystems. The design representation is also the obvious target for the output of the simulation (feedback). Visualization of airflow in terms of the resulting voxels makes effortless and enjoyable viewing but merely allowing the visualization to coexist with the representation of spaces and building elements does not provide design guidance. One way of achieving that is by treating spaces not as integral entities but as containers of relevant surfaces. These surfaces determine the adaptive subdivision of the space and function as attractors for voxel clustering.
keywords	Simulation, Representation, Visualization
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	470c
authors	Kuenstle, Michael W.
year	2001
title	COMPUTATIONAL FLUID DYNAMIC APPLICATIONS IN WIND ENGINEERING FOR THE DESIGN OF BUILDING STRUCTURES IN WIND HAZARD PRONE AREAS (Computational Flow Dynamic Applications in Wind Engineering for the Design of Building Structures in Wind Hazard Prone Urban Areas)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 67-70
summary	This paper documents an initial study investigating the integration of Computational Fluid Dynamics (CFD) simulation modeling into wind mitigation design for building structures located in wind hazard prone areas. Some of the basic principles and theoretical concepts of fluid flow and wind pressure as well as their translation into design criteria for structural analysis and design are reviewed, followed by a discussion of a CFD application case study for a simulated hurricane force wind flow over a low rectangular building using the k-epsilon turbulence model. The techniques and parameters for development of the simulation are discussed and some preliminary interpretations of the results are evaluated by comparing its predictions against existing experimental and analytical data, with special attention paid to the American Society of Civil Engineers, Minimum Design Loads for Buildings and Other Structures, ACSE 7-98 and the Uniform Building Code .
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	6a70
authors	Liapi, Katherine
year	2001
title	Transformable Structures: Design Features and Preliminary Investigation
source	Journal of Architectural Engineering -- March 2001 -- Volume 7, Issue 1, pp. 13-17
summary	Innovative building conceptions, that allow for the change of the building's shape and form, can offer advantages for certain types of applications compared to conventional structures. The conception, design,and realization of transformable building structures require the use of innovative building technologies, and the development of new analytical methods and procedures. Geometric complexity is usually acharacteristic of the architectural expression of transformable structures, and their initial geometric configuration and representation is one of the earliest and most challenging phases in their design. A preliminaryinvestigation with computer simulation and animation studies can help identify problems in their initial geometric conception.
series	journal paper
last changed	2003/05/15 21:45

_id	360e
authors	Mahdjoubi, Lamine and Wiltshire, John
year	2001
title	Towards a framework for evaluation of computer visual simulations in environmental design
source	Design Studies 22 (2) (2001) pp. 193-209
summary	Research has been conducted into the assessment of visual simulation as a credible method for predicting future environments, especially in building and landscape evaluation. Despite this work a conceptual framework to guide research and practice in this field has not been developed. The recent and increasingly widespread use of computer simulation in design has created an urgent need to develop a conceptual framework which can test prevailing assumptions and provide the basis for the development of an accepted theory in the field. This paper proposes such a framework, and identifies and relates the significant variables, which impact upon the application of visual simulation in an environmental design, task-orientated context.
series	journal paper
last changed	2003/05/15 21:45

_id	39ea
authors	Maver, T., Harrison, C. and Grant, M.
year	2001
title	Virtual Environments for Special Needs. Changing the VR Paradigm
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 151-159
summary	The normal application of Virtual Reality is to the simulation of environments, which are in some way special - remote, hazardous or purely imaginary. This paper describes research and development work which changes the paradigm by simulating perfectly ordinary buildings for special people. Some 15% of the population have some form of physical impairment - a proportion which is likely to rise in line with an ageing population. New legislation, such as the UK Disability Discrimination Act places additional responsibility on building owners to ensure adequate access for people with an impairment and this in turn will place additional responsibility on the architect. Current methods of auditing access for new building are primitive and require the auditor to interpret plans/sections of the proposed building against a checklist of requirements specific to the special need. This paper reports on progress in the use of an immersive VR facility to simulate access to buildings for two broad classes of user: i) those with a mobility impairment; ii) those with visual impairment. In the former case, a wheelchair motion platform has been designed which allows the wheelchair user to navigate the virtual building; a brake and motor connected to the rollers on which the wheelchair sits facilitate the effects of slope and surface resistance. In the latter case, the main categories and degrees of visual impairment can be simulated allowing architects to assess the contribution of form, colour and signage to safe access.
keywords	Virtual Reality, Mobility Impairment, Visual Impairment, Access, Simulation
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
doi	https://doi.org/10.52842/conf.acadia.2016.140
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	8a28
authors	Ng, E., Yan-Yung, P., Lam, K., Wei, W. and Nagakura, T.
year	2001
title	Advanced lighting simulation in architectural design in the tropics
source	Automation in Construction 10 (3) (2001) pp. 365-379
summary	This paper outlines a 2-year research program that the team attempted to apply one of the most powerful computational lighting simulation softwares, to assist in the daylighting design of an actual building in the tropics. The validation studies, which were carried out in the Asian Civilisation Museum (ACM) in Singapore, showed that can be used to predict the internal illuminance with a high degree of accuracy under overcast sky conditions. The experimental application of to daylighting investigation of the ACM further supports its capabilities as well as its accuracy. Using to study two daylighting control options (curtains and louvers), it can be found that louvers are more effective than curtains as daylighting control devices, and that the angle of the louvers have more effect than their reflectance on daylight penetration and distribution.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	cf2011_p163
id	cf2011_p163
authors	Park, Hyoung-June
year	2011
title	Mass-Customization in the Design of 4,000 Bus Stops
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 265-278.
summary	In Hawaii, ‚"TheBus‚" has been a main transportation system since 1971. Considering the high cost of living in Hawaii and the absence of a rail system, the use of ‚"TheBus‚" has been an instrumental vein of the city life in Honolulu with rhythmical pauses at about 4,000 bus stops in Honolulu. However, existing undifferentiated bus stops are developed from a cost effective mass production system so that they have been problematic for satisfying specific needs from various site conditions. In this research, an integrated computational method of mass-customization for designing 4,000 bus stops is introduced. According to various site conditions, the design of each bus stop is customized. Unlike the mass‚Äêproduced bus stops commonly seen in cities today, the proposed computational method in this paper produces bus stop design outcomes that fit into the physical characteristics of the location in which they are installed. Mass-customization allows for the creation and production of unique or similar buildings and building components, differentiated through digitally‚Äêcontrolled variation (Kolarevic, 2003). The employment of a computational mass‚Äêcustomization in architectural design extends the boundary of design solutions to the satisfaction of multi-objective requirements and unlimited freedom to search alternative solutions (Duarte, 2001; Caldas, 2006). The computational method developed in this paper consists of 1) definition of a prototype, 2) parametric variation, 3) manual deformation, and 4) simulation based deformation. The definition of a prototype is the development of a basic design to be transformed for satisfying various conditions given from a site. In this paper, the bus stop prototype is developed from the analysis of more than 300 bus stops and the categorization of the existing bus stops according to their physical conditions, contextual conditions, climatic conditions, and existing amenities. Based upon the outcome of the analysis, the design variables of a bus stop prototype are defined. Those design variables then guide the basic physical parameters for changing the physical configuration of the prototype according to a given site. From this, many possible design outcomes are generated as instances for further developments. The process of manual deformation is where the designer employs its intuition to develop the selected parametric variation. The designer is compelled to think about the possible implication derived from formal variation. This optional process allows every design decision to have a creative solution from an individual designer with an incidental quality in aesthetics, but substantiated functional quality. Finally the deformation of the selection is guided and controlled by the influence of sun direction/ exposure to the selection. The simulation based deformation starts with the movement of the sun as the trigger for generating the variations of the bus stop prototype. The implementation of the computational method was made within the combination of MEL (Maya Enbedded Language), autodesk MAYA and Ecotect environment.
keywords	mass-customization, parametric variation, simulation based deformation
series	CAAD Futures
email
last changed	2012/02/11 19:21

For more results click below: