Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 54

Reformat results as: short short into frame detailed detailed into frame

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
doi	https://doi.org/10.52842/conf.acadia.2016.140
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	7702
authors	Roy, U., Pramanik, N., Sudarsan, R., Sriram, R.D. and Lyons, K.W.
year	2001
title	Function-to-form mapping: model, representation and applications in design synthesis
source	Computer-Aided Design, Vol. 33 (10) (2001) pp. 699-719
summary	Design of a new artifact begins with incomplete knowledge about the final product and the design evolves as it progresses from the conceptual design stage to a moredetailed design. In this paper, an effort has been made to give a structural framework, through a set of generic definitions, to product specification, functionalrepresentation, artifact representation, artifact behavior and tolerance representation. A design synthesis process has been proposed for evolution of a product from theproduct specification. The proposed design synthesis method is a mapping from the functional requirements to artifacts, with multi-stage constrained optimization duringstages of design evolution. Provisions have been kept to augment and/or modify the product specification and domain knowledge during stages of development to guidethe design process. The effectiveness of the proposed design process has been illustrated with a simple design example based on a sample artifact library. An overalldesign scheme has been presented.
keywords	Design Synthesis, Function-To-Form Mapping, CAD, Object-Oriented Representation, Conceptual Design
series	journal paper
email
last changed	2003/05/15 21:33

_id	avocaad_2001_05
id	avocaad_2001_05
authors	Alexander Koutamanis
year	2001
title	Analysis and the descriptive approach
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The rise of consciousness concerning the quality of working and living conditions has been a permanent though frequently underplayed theme in architecture and building since the reconstruction period. It has led to an explosive growth of programmatic requirements on building behaviour and performance, thus also stimulating the development of design analysis. The first stage of development was characterized by the evolution of prescriptive systems. These reversed the structure of pre-existing proscriptive systems into sequences of known steps that should be taken in order to achieve adequate results. Prescriptive systems complemented rather than replaced proscriptive ones, thereby creating an uncertain mixture of orthodoxy and orthopraxy that failed to provide design guidance for improving design performance and quality.The second stage in the development of design analysis focuses on descriptive methods and techniques for analyzing and supporting evaluation. Technologies such as simulation and scientific visualization are employed so as to produce detailed, accurate and reliable projections of building behaviour and performance. These projections can be correlated into a comprehensive and coherent description of a building using representations of form as information carriers. In these representations feedback and interaction assume a visual character that fits both design attitudes and lay perception of the built environment, but on the basis of a quantitative background that justifies, verifies and refines design actions. Descriptive analysis is currently the most promising direction for confronting and resolving design complexity. It provides the designer with useful insights into the causes and effects of various design problems but frequently comes short of providing clear design guidance for two main reasons: (1) it adds substantial amounts of information to the already unmanageable loads the designer must handle, and (2) it may provide incoherent cues for the further development of a design. Consequently the descriptive approach to analysis is always in danger of been supplanted by abstract decision making.One way of providing the desired design guidance is to complement the connection of descriptive analyses to representations of form (and from there to synthesis) with two interface components. The first is a memory component, implemented as case-bases of precedent designs. These designs encapsulate integrated design information that can be matched to the design in hand in terms of form, function and performance. Comparison between precedents with a known performance and a new design facilitate identification of design aspects that need be improved, as well as of wider formal and functional consequences. The second component is an adaptive generative system capable of guiding exploration of these aspects, both in the precedents and the new design. The aim of this system is to provide feedback from analysis to synthesis. By exploring the scope of the analysis and the applicability of the conclusions to more designs, the designer generates a coherent and consistent collection of partial solutions that explore a relevant solution space. Development of the first component, the design case-bases, is no trivial task. Transformability in the representation of cases and flexible classification in a database are critical to the identification and treatment of a design aspect. Nevertheless, the state of the art in case-based reasoning and the extensive corpus of analysed designs provide the essential building blocks. The second component, the adaptive generative system, poses more questions. Existing generative techniques do not possess the necessary richness or multidimensionality. Moreover, it is imperative that the designer plays a more active role in the control of the process than merely tweaking local variables. At the same time, the system should prevent that redesigning degenerates into a blind trial-and-error enumeration of possibilities. Guided empirical design research arguably provides the means for the evolutionary development of the second component.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	444b
authors	Barrionuevo, Luis F.
year	2001
title	Positioning of Buildings in a Land
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 493-499
doi	https://doi.org/10.52842/conf.ecaade.2001.493
summary	Configurational studies are useful tools to architectural designing, since they help to understand the grouping of objects in the space (two-dimensional and/or threedimensional). The designer, after a classification of objects that satisfies the needs set to a group of objects, impose some restrictions to the objects that will govern the composition. These restrictions are those that will define the result through operations carried out by the designer. Among these operations the location of buildings in a determined area and the particular environmental qualities condition the final result. This work presents the results obtained by means of the implementation of a computing program of the type Evolution Program (EP) implemented in language C. The implementation of the program is explained in the first part of the paper. In the second part the successive steps are described. The numerical results obtained with the mentioned program are shown graphically. Examples of different complexity level illustrate the discussion of the theoretical matters.
keywords	Positioning Buildings, Configurational Studies, Evolutionary Design, Evolutionary Algorithms, Evolutionary Programming
series	eCAADe
last changed	2022/06/07 07:54

_id	6473
authors	Caneparo, Luca and Robiglio, Matteo
year	2001
title	Evolutionary Automata for Suburban Form Simulation
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 767-780
summary	The paper outlines a research project to develop a dynamic simulation of suburbanization processes. The approach to simulating suburban form relies on modelling different interacting processes on various scales. Two layered models are implemented, the Socio-Economic and Zoning model and the Suburban Form model, respectively by means of cellular automata and genetic programming. The Socio-Economic and Zoning model simulates exogenous factors and endogenous processes of large-scale suburban dynamics. The model approximates the area by means of a rectangular grid to the scale of hundred meters. The Suburban Form model uses a smaller grid, to the scale of meters, and is three-dimensional. The resulting dynamic, 3D, fine-scale model will create scenarios of suburban growth, allowing evaluation of their consequences on built environment and landscape.
keywords	Urban Morphology, Model Based Design Support System, Urban Design, Landscape, Genetic Programming, Cellular Automata
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	270d
authors	Elezkurtaj, Tomor and Franck, Georg
year	2001
title	Evolutionary Algorithms in Urban Planning
source	CORP 2001, Vienna, pp. 269-272
summary	The functions supported by commercial CAD software are drawing, construction and presentation. Until now, no programssupporting the creative part of architectural and urban problem solving are on the market. The grand hopes of symbolic AI ofprogramming creative architectural and urban design have been disappointed. In the meantime, methods called New AI are available.Among these methods, evolutionary algorithms are particularly promising for solving design problems. The paper presents anapproach to town panning and architectural problem solving that combines an evolutionary strategy (ES), a genetic algorithm (GA)and a Particle System. The problem that remains incapable of being solved algorithmically has to do with the fact that in architectureand urbanizm form as well as function count. Because function relates to comfort, easiness of use, and aesthetics as well, it ishopeless to fully specify the fitness function of architecture. The approach presented circumvents a full specification through dividinglabor between the software and its user. The fitness function of town plans is defined in terms only of proportions of the shapes, areasand buildings to be accommodated and topological relations between them. The rest is left to the human designer who interactivelyintervenes in the evolution game as displayed on the screen.
series	other
email
more	www.corp.at
last changed	2002/12/19 12:17

_id	5225
authors	Gomez de Silva Garza, Andres and Maher, Mary Lou
year	2001
title	Using Evolutionary Methods for Design Case Adaptation
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 180-191
doi	https://doi.org/10.52842/conf.acadia.2001.180
summary	Case-based reasoning (CBR) provides a methodology for directly using previous designs in the development of a new design. An aspect of CBR that is not well developed for designing is the combination and adaptation of previous designs. The difficulty with this aspect of case-based design is partly due to the extensive amounts of specialised knowledge needed to select the appropriate features of a previous design to include in the new design and the adaptation of these features to fit the context of a new design problem. In this paper we present a design process model that combines ideas from CBR and genetic algorithms (GA’s). The CBR paradigm provides a method for the overall process of case selection and adaptation. The GA paradigm provides a method for adapting design cases by combining and mutating their features until a set of new design requirements and constraints are satisfied. We have implemented the process model and illustrate the model for residential floor plan layout. We use a set of Frank Lloyd Wright prairie house layouts as the case base. The constraints used to determine whether new designs proposed by the process model are acceptable are taken from feng shui, the Chinese art of placement. This illustration not only clarifies how our process model for design through the evolutionary adaptation of cases works, but it also shows how knowledge sources with distinct origins can be used within the same design framework.
keywords	Evolutionary Design, Case-Based Reasoning, Floor Plan Layout
series	ACADIA
email
last changed	2022/06/07 07:51

_id	943c
authors	Hendricx, A. and Neuckermans, H.
year	2001
title	The object model at the core of the IDEA+ design environment
source	Beheshti, R. (ed), Advances in Building Informatics, Proceedings of the 8th EuropIA International Conference on the application of Artificial Intelligence, Robotics and Image Processing to Architecture, Building Engineering & Civil Engineering, Delft, The Netherlands, April 25-27, 2001, pp. 113-125
summary	This paper focuses on three different aspects in which the IDEA+ core model differs from many other product modelling research initiatives: the systematic approach in the construction of the model, the respect for the evolutionary nature of architectural design, and the use of actual and complete design cases to test the model. Key words: CAAD, product modelling, integrated design environment, MERODE 1 The IDEA+ project: towards an integrated design environment In spite of the extensive use of all kinds of hardware and software in the architectural offices, the use of computers still does not contribute essentially to better architecture. For the CAD packages on the one hand, they have proven to be an efficient alternative for the traditional drawing board. Yet they fail in the early conceptual stage of design where creativity and exploration play the leading role. For computational tests and analysis tools on the other hand, they can hardly handle the typical absence o
series	other
email
last changed	2003/04/23 15:14

_id	ga0114
id	ga0114
authors	Hung, C.K., Frazer, J.H. and Xi, T.M.
year	2001
title	Interactive Evolutionary Design in a Hierarchical Way
source	International Conference on Generative Art
summary	This paper introduces a computational system framework for enhancing design in an evolutionary manner. The framework provides a structure for supporting design activities at the conceptual design stage at different levels of representation and manipulation. With this framework, designers can interactively manipulate design data and develop a solution in ahierarchical manner. Furthermore this system framework provides explorative and adaptive ability through its inter-links with a number of computational evolutionary and generative modules. In this paper, this system framework and its application in the design of wine glasses are presented.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	9057
authors	Knight, M., Bandyopadhyay, S., Berridge, P. and Brown, A.
year	2001
title	Digital Hindcasting - Critical Analysis through Virtual Reconstruction
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 529-533
doi	https://doi.org/10.52842/conf.ecaade.2001.529
summary	Manah is an abandoned oasis settlement in Oman. During what is termed the “Golden period” in the region’s cultural development the settlement became on of the most important cultural centres of the interior. For a long period Manah stood as the seat of learning in sciences and arts. A current project is underway to establish, as far as possible, how the settlement evolved; how tribal, cultural, religious and social factors impinged on Manah as it grew over the years. The work described here is directed as applying computational methods to augment the analysis and critical review of that evolution. We are aiming to explain the evolutionary process using computer mediated techniques, working backwards from the current state, to the inception of the settlement; hence the term Digital Hindcasting.
keywords	Reconstruction, Critical Analysis, Settlements
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ga0109
id	ga0109
authors	Lewis, Chak Chan
year	2001
title	Defects Defined by Form Making Method for Improving Generative Design System
source	International Conference on Generative Art
summary	Evolutionary-based Generative Design System (GDS) is generally designed for industrial designers during the early stage of conceptual design. Although “additive” Rapid Prototyping (RP) methods are commonly applied for the physical realization, grown Surfaces Object (SO) created from these GDS still has room to be considered to a combined workable volume,especially for the more complex design. The inarticulate processes from GDS to Generative Production System (GPS) are linking up with different aspects and contexts as well as the conventional Computer-Aided Design (CAD)/RP integration, which has been conducted for along time. There are design constraints existing between 3D SO in industry design representation and feasible 3D production solution. Perception to object designing with knowledge is limited at SO forming by incomplete interpretations. Meanwhile, it is difficult to discern the problemsof incomplete object generation as hidden illegal design occurred from time to time because of the design constraints, despite the completion of the design representation. It has led to some of the invalidity of surface feature at the end. The reconstruction of the RP process ofthe SO pre-processing procedure can help to clarify these defects with thickness requirement in generative production. The aim of this paper is to verify an effective generative design strategy as a possibility ofimplementing method(s) or tool. They will be built within a surface-oriented GDS by mapping a valid object directly accepted by any RP system without any influence on generative object creating. Through the involvement of Form Making processes of RP from selected instants with their solid phenomena, evidences are used for defending this viewpoint.Throughout the process, generative design method and CAD method have been utilized for the creation of virtual form. The 3D printer and Fused Deposition Modeling (FDM) technology with “trial and error” method were employed in the RP processes.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	d3d4
authors	Sato, Tomoya and Hagiwara, Masafumi
year	2001
title	IDSET: Interactive Design System using Evolutionary Techniques
source	Computer-Aided Design, Vol. 33 (5) (2001) pp. 367-377
summary	In this paper, we propose a tool-creating support system named IDSET (Interactive Design System using Evolutionary Techniques). Two kinds of Stages are used in theproposed IDSET: Stages where fundamental shapes are generated and Stages where they are combined. At each Stage, new shapes are generated by the system usingevolutionary techniques, and they are shown to the user. The user's creativity is stimulated by this process. Since the system begins with creating parts instead of usingparts that are prepared in advance, various novel tools can be formed. The user only has to evaluate the displayed tools, not to have to make them. A system to create toolsthat are composed of two fundamental parts has been implemented as an example of the proposed system. Computer experiments have been carried out, and various toolsand artistic shapes have been created. Some shapes which human beings could not easily envisage were included in the created shapes. This underlines the effectiveness ofthe proposed IDSET.
keywords	Interactive Design, Evolutionary Techniques, Tool-Creating Support System
series	journal paper
last changed	2003/05/15 21:33

_id	ga0106
id	ga0106
authors	Soddu, Celestino
year	2001
title	Generative Natural Flux
source	International Conference on Generative Art
summary	I believe to interpret the thought of all the participants to this fourth conference on Generative Art affirming that generative art is a deep creative experience and, somehow, visionary too. This experience, in fact, anticipates the possible evolution of the fields proper of humancreativeness, rediscovering paths and approaches to ideation that have been proper of one of the most fertile moments of the human history and culture as Renaissance. In this paper I would like to deal with some aspects, and also some different approaches of generative creativeness. In particular, the importance to use specific reading keys, bothsubjective and objective, the possibility to reach concrete and feasible design results entering a complex figuration of possible incoming worlds. In other terms, to reach projects directly interfaceable with productive reality. Lastly, I will evaluate if and how it is possible andprofitable to use the random factor in evolutionary processes, investigating on the differences that the use of such factor involves in the creative and design experience and the quality of the obtainable results.But how can we define generative creativeness?
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	2005_787
id	2005_787
authors	Veikos, Cathrine
year	2005
title	The Post-Medium Condition
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 787-794
doi	https://doi.org/10.52842/conf.ecaade.2005.787
summary	Theorists in art, architecture and visual media have described the digital world as a world of mediumlessness and proclaimed that the medium of a work, once the ontological determinant for the classification of the arts, is rendered meaningless by recent technological and cultural developments (Krauss, 2000; Negroponte, 1995; Manovich, 2001). Although indebted to specific media-based techniques and their attendant ideologies, software removes the material reality of techniques to an immaterial condition where the effects of material operations are reproduced abstractly. This paper asserts that a productive approach for digital design can be found in the acknowledgement that the importance of the digital format is not that it de-materializes media, but that it allows for the maximum intermingling of media. A re-conceptualization of media follows from this, defined now as, a set of conventions derived from the material conditions of a given technical support, conventions out of which to develop a form of expressiveness that can be both projective and mnemonic (Krauss, 2000). The paper will focus on the identification of these conventions towards the development of new forms of expressiveness in architecture. Further demonstration of the intermingling of materially-based conventions is carried out in the paper through a comparative analysis of contemporary works of art and architecture, taking installation art as a particular example. A new design approach based on the maximum intermingling of media takes account of integrative strategies towards the digital and the material and sees them as inextricably linked. In the digital “medium” different sets of conventions derived from different material conditions transfer their informational assets producing fully formed, material-digital ingenuity.
keywords	Expanded Architecture, Art Practice, Material, Information, ParametricTechniques, Evolutionary Logics
series	eCAADe
email
last changed	2022/06/07 07:58

_id	90b5
authors	Zhou, Qi and Krawczyk, Robert J.
year	2001
title	From CAD to iAD: A survey of Internet application in the AEC industry
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 392-397
doi	https://doi.org/10.52842/conf.acadia.2001.392
summary	The internet is becoming increasingly more valuable in the field of architectural design that what we conventionally called CAD might soon be changed to iAD (internet Aided Design) (Zhou and Krawczyk 2000). In order to have a clear vision of what iAD will be or could be, we should first examine what is currently available. This research focuses on an investigation of selected web vendors, which are typical and most influential in providing internet related services for the AEC industry. Our purpose for doing this survey is: to understand the progress and development of internet application in the AEC industry, identify the technology used in this area, determine the advantages and deficiencies of current practice and develop a base for future research in proposing a evolutionary model of internet Aided Design for architecture.
keywords	Internet Aided Design, Web-Based Application, On-Line Collaboration
series	ACADIA
email
last changed	2022/06/07 07:57

_id	bb5f
authors	Ahmad Rafi, M.E. and Mohd Fazidin, J.
year	2001
title	Creating a City Administration System (CAS) using Virtual Reality in an Immersive Collaborative Environment (ICE)
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 449-453
doi	https://doi.org/10.52842/conf.ecaade.2001.449
summary	Current problems in administration of a city are found to be decentralized and noninteractive for an effective city management. This usually will result in inconsistencies of decision-making, inefficient services and slow response to a particular action. City administration often spends more money, time and human resource because of these problems. This research demonstrates our research and development of creating a City Administration System (CAS) to solve the problems stated above. The task of the system is to use information, multimedia and graphical technologies to form a database in which the city administrators can monitor, understand and manage an entire city from a central location. The key technology behind the success of the overall system uses virtual reality and immersive collaborative environment (ICE). This system employs emerging computer based real-time interactive technologies that are expected to ensure effective decisionmaking process, improved communication, and collaboration, error reduction, (Rafi and Karboulonis, 2000) between multi disciplinary users and approaches. This multi perspective approach allows planners, engineers, urban designers, architects, local authorities, environmentalists and general public to search, understand, process and anticipate the impact of a particular situation in the new city. It is hoped that the CAS will benefit city administrators to give them a tool that gives them the ability to understand, plan, and manage the business of running the city.
keywords	City Administration System (CAS), Virtual Reality, Immersive Collaborative Environment (ICE), Database
series	eCAADe
email
last changed	2022/06/07 07:54

_id	4b30
authors	Ahmad Rafi, M.E. and Mohd Fazidin, J.
year	2001
title	ARMY WAR GAME SIMULATION (AWAS) system - Utilising architectural knowledge in virtual environments
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 435-438
doi	https://doi.org/10.52842/conf.caadria.2001.435
summary	This research briefly examines the importance of collaborative design in developing a multi-user, multi-tiered, networked and real-time information base system. Aspects such as navigation, interaction, communication, movements (objects or virtual camera), control, level of details, spatial design and virtual spaces will be explained to show their importance in the development of virtual world. This paper will further explore the aspects of collaborative design in the context of Army War Game Simulation System (AWAS). A generic collaborative design-based framework will be demonstrated to simulate the overall operations of a war in command-control structure of the force.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	12e3
authors	Ahmad Rafi, M.E., Che Zulkhairi, A. and Karboulonis, P.
year	2002
title	Interactive Storytelling and Its Role in the Design Process
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 151-158
doi	https://doi.org/10.52842/conf.caadria.2002.151
summary	Projects of ever increasing complexity and size have incited the need for new and robust design methodologies and tools in an effort to manage complexity, lower costs, ascertain quality and reduce risk. Technology convergence through the growing availability of networked computers, rapid progress in Computer Aided Design (CAD) and information management have encouraged the undertaking of even more complex designs that demand high degrees of interaction, collaboration and the efficient sharing and dissemination of information. It is suggested that interactive storytelling and interactive design (Rafi and Karboulonis, 2001) techniques that use non-linear information mapping systems can be deployed to assist users as they navigate information that is structured to address localized needs as they arise. The design process is a collaborative effort that encompasses diverse knowledge disciplines and demands the management and utilization of available resources to satisfy the needs of a single or set of goals. It is thought that building industry specialists should work close together in an organised manner to solve design problems as they emerge and find alternatives when designs fall short. The design process involves the processing of dynamic and complex information, that can be anything from the amount of soil required to level lands - to the needs of specific lightings systems in operation theatres. Other important factors that affect the design process are related to costs and deadlines. This paper will demonstrate some of our early findings in several experiments to establish nonlinear storytelling. It will conclude with a recommendation for a plausible design of such a system based on experimental work that is currently being conducted and is reaching its final stages. The paper will lay the foundations of a possible path to implementation based on the concept of multi-path animation that is appropriate for structuring the design process as used in the building industry.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	88d3
id	88d3
authors	Calderon, C., Cavazza., M
year	2001
title	REACTIVE VIRTUAL ENVIRONMENTS IN BUILDING DESIGN
source	Proceedings: SCI 2001, The Fifth Multi-Conference on Systemics, Cybernetics and Informatics, Orlando, Florida, USA, July 22 - 25, 2001. http://www.iiis.org/sci/
summary	This paper presents the first prototype of a reconfigurable Virtual Environment (VE). The objective of the system is to link 3D Intelligent Virtual Environments to interactive planning systems. This type of system makes possible interactive solutions where the user refines a possible configuration and enables the system to generate a complete new solution enforcing all the design constraints, previously programmed. In this first prototype we link our constraint solver with the visualization engine so that the solution produced by the constraint solver is displayed in a VE.
keywords	Intelligent, Reactive, Virtual Environment, Spatial configuration tasks
series	other
type	normal paper
email
last changed	2005/12/02 11:12

_id	c006
authors	Chang, T.-W. and Huang, J. H.
year	2001
title	The acting roles model of web-based learning - Web-based Architectural Learning Envirnoment (WALE)
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 323-327
doi	https://doi.org/10.52842/conf.caadria.2001.323
summary	Some useful aspects are learned on the asynchrony characteristics of Web and a crucial exhibiting space so-called gallery composed by studentsÌ creation proposes a positive virtual learning space. In this paper, an acting role-interplayed system (WALE) is demonstrated through a CAD subject for third-year architectural students at Ming Chuan University will reveal and evaluate the potential or drawback of such environment. WALE is based on a game-playing learning environment for students to interact motivated and to evolve the design potential of individual. This study of WALE is facilitated with CAD tools and developed to help students to explore possible design alternatives by acting multi-role in the process of design.
series	CAADRIA
email
last changed	2022/06/07 07:56

For more results click below: