Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 106

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_084
id	ecaade2013_084
authors	Stojanovic, Djordje and Cerovic, Milutin
year	2013
title	Self-regulating Fields and Networks
doi	https://doi.org/10.52842/conf.ecaade.2013.1.633
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 633-642
summary	This paper will explore the connection between two theoretical models, initially identified as the Field and the Network Conditions (Allen, 1997; Wigley, 2001) and material based studies in architectural design, conducted as a sequence of experiments. A number of prototypical models have been produced to test the practical and theoretical dimensions of the design approach which employs elastic material performance to achieve highly versatile spatial organization. One of the concrete outcomes of the exploration is the specific software extension produced by the authors of this paper. Its purpose is to enable designers to maintain an indirect control of complex spatial models based on the use of two parallel sets of algorithmic protocols which define: a. geometric logic and b. intrinsic material behavior.
wos	WOS:000340635300066
keywords	Elasticity; material performance; self-regulating systems; prototypical models; physics based simulation.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	c259
authors	Kokotovich, Vasilije and Purcell, Terry
year	2001
title	Ideas - The Embodiment of Ideas, and Drawing: An Experimental Investigation of Inventing
source	J. S. Gero, B. Tversky and T. Purcell (eds), 2001, Visual and Spatial Reasoning in Design, II - Key Centre of Design Computing and Cognition, University of Sydney, Australia
summary	The term visual reasoning, in cognitive psychology, oftenrefers to the use of visual spatial relations in making inferences aboutcorresponding conceptual relations. The conclusion is that external visualrepresentations have special properties, which can aid reasoning abouthigher order abstract concepts. The design literature is more specific andoften sees visual reasoning as synonymous with drawing, and considersthis a core activity in resolving design problems. The research to bereported examined visual reasoning and design, by investigating the rolethat drawing plays in the practicality and creativity of inventions. Themost striking finding was that using only mental imagery produced morecreative and practical inventions than the use of drawing and that this wasdependant on the area of expertise of the participants. This appears to runcounter to the views found in both the visual reasoning and designliterature regarding the effectiveness of visual representations anddrawing. This has implications for our understanding of both the visualreasoning and design thinking processes.
series	other
email
more	http://www.arch.usyd.edu.au/kcdc/conferences/vr01/
last changed	2003/05/02 11:11

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	c8ce
authors	Keefe, D., Acevedo, D., Moscovich, T., Laidlaw, D., and La Viola, J.
year	2001
title	CavePainting: A Fully Immersive 3D Artistic Medium and Interactive Experience
source	Proceedings of the 2001 Symposium on Interactive 3D Graphics, March 2001
summary	CavePainting is an artistic medium that uses a 3D analog of 2D brush strokes to create 3D works of art in a fully immersive Cave environment. Physical props and gestures are used to provide an intuitive interface for artists who may not be familiar with virtual reality. The system is designed to take advantage of the 8 ft. x 8 ft. x 8 ft. space in which the artist works. CavePainting enables the artist to create a new type of art and provides a novel approach to viewing this art after it has been created. In this paper, we describe Cave- Painting's 3D brush strokes, color pickers, artwork viewing mode, and interface.We also present several works of art created using the system along with feedback from artists. Artists are excited about this form of art and the gestural, full-body experience of creating it.
series	other
last changed	2003/04/23 15:50

_id	diss_long
id	diss_long
authors	Long, A.
year	2001
title	Quill A Gesture Design Tool for Pen-based User Interfaces
source	U.C. Berkeley
summary	This dissertation describes the motivation, design, and development of a tool for designing gestures for pen-based user interfaces. Pens and other styli have been ubiquitous for recording information for centuries. Recently, pen-based computers have recently become common, especially small devices such as the Palm Pilot. One benefit pens provide in computer interfaces is the ability to draw gestures—marks that invoke commands. Gestures can be intuitive and faster than other methods of invoking commands. However, our research shows that gestures are sometimes misrecognized and hard to remember. We believe these problems are due in part to the difficulty of designing “good” gestures—that is, gestures that are easy to remember and are recognized well—and the lack of tools for helping designers create good gestures. We believe that an improved gesture design tool can help interface designers create good gestures for their applications. Since people confuse similar objects and misremember them, we performed experiments to measure why people perceived gestures as similar. We derived computational metrics for predicting human perception of gesture similarity. Based on the results of our experiments, we developed a gesture design tool, quill. The tool warns designers about gestures that may be hard to remember or recognize, and provides advice about how to improve the gestures. It also provides a convenient way to test recognition of gestures. To evaluate quill, a user study was performed with 10 professional user interface designers and one professional web designer. All designers were able to create gesture sets using quill, but not all designers benefited from quill’s suggestions. More work is needed to make suggestions useful for most designers. The primary contributions of this work are: • Improved understanding of the gesture design process, including the types of problems people encounter when designing gestures. • Computational models for predicting human-perceived gesture similarity. • Confirmation of the importance of good naming for gesture memorability. • An intelligent gesture design tool, quill, which automatically warns designers about potential problems with their gestures and advises them about how to fix these problems. This work also suggests several areas for future work in the areas of gesture design tools and gesture similarity and memorability.
series	thesis:PhD
email
more	http://www-2.cs.cmu.edu/~chrisl/work/pubs/
last changed	2003/09/24 14:54

_id	6df6
authors	Pratini, Edison
year	2001
title	New Approaches to 3D Gestural Modeling - The 3D SketchMaker Project
doi	https://doi.org/10.52842/conf.ecaade.2001.466
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 466-471
summary	The 3D SketchMaker project has developed two prototypes for a gestural 3D sketching system to be used in the earliest phases of the design process. The goal of this ongoing research is to provide architects, and other designers involved in object conception, with a 3D gestural instrument that takes advantage of new virtual reality resources and is more natural than using the mouse, less difficult than learning complex software and less abstract than manipulating 2D entities on orthogonal projections. The system was conceived to assist or replace the first 2D drawing steps in the design process, generating rough 3D sketches that can be refined later using any 3D package. It is, in essence, a 3D modeling system directed to do sketching with hand movements and gestures in a virtual reality environment.
keywords	Gestural Interface, Virtual Reality, 3D Modeling, Sketching
series	eCAADe
last changed	2022/06/07 08:00

_id	avocaad_2001_10
id	avocaad_2001_10
authors	Bige Tunçer, Rudi Stouffs, Sevil Sariyildiz
year	2001
title	Facilitating the complexity of architectural analyses
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	It is common practice for architecture students to collect documents on prominent buildings relevant to their design task in the early stage of design. While practitioners can rely on a body of design experience of their own, during the process of a new design, students can only draw from the examples of success and failure from other architects. In the past, such precedent based learning was implicit in the master-apprentice relationship common in the educational system. Nowadays academics commonly no longer have the possibility to maintain an extensive design practice, and instead introduce important outside precedents to the students. Thus, the study of important historical precedents or designs plays an important role in design instruction and in the students’ design processes. While there is no doubt that the most effective outcome of such a study would be achieved when the student does entire the study herself, students also benefit from a collaboration with peers, where they form groups to do an analysis of various aspects of a same building or over a group of buildings. By integrating the respective results into a common, extensible, library, students can draw upon other results for comparisons and relationships between different aspects or buildings. The complexity this introduces is best supported in a computer medium.The Web offers many examples of architectural analyses on a wide variety of subjects. Commonly, these analyses consist of a collection of documents, categorized and hyperlinked to support navigation through the information space. More sophisticated examples rely on a database for storage and management of the data, and offer a more complex categorization of the information entities and their relationships. These studies present effective ways of accessing and browsing information, however, it is precluded within these analyses to distinguish and relate different components within the project documents. If enabled, instead, this would offer a richer information structure presenting new ways of accessing, viewing, and interpreting this information. Hereto, documents can be decomposed by content. This implies both expanding the document structure, replacing document entities by detailed substructures, and augmenting the structure’s relatedness with content information. The relationships between the resulting components make the documents inherently related by content.We propose a methodology to integrate project documents into a single model, and present an application for the presentation of architectural analyses in an educational setting. This approach provides the students with a simple interface and mechanisms for the presentation of an analysis of design precedents, and possibly their own designs. Since all the information is integrated within a single environment, students will benefit from each others’ studies, and can draw new conclusions across analyses and presentations from their peers.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	5a82
authors	Bouvet, D., Froumentin, M. and Garcia, G.
year	2001
title	A real-time localization system for compactors
source	Automation in Construction 10 (4) (2001) pp. 417-428
summary	An operator-aiding system for compactors must incorporate a localization system. In this paper, we consider real-time kinematic (RTK) GPS and we present the solutions we have developed to maintain the positioning error lower than 0.2 m even during the satellite (limited) masking phases. By combining gyro, steering angle and speed measurements, we show that it is possible to obtain satisfying performances in dead-reckoning navigation with a low-cost internal sensor set. A forward–backward Kalman filter is proposed to deal with particularly long maskings, which typically occur when the machine works under bridges. Results of experiments carried out with an instrumented machine are presented to validate the proposed solutions.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	8a8c
authors	Choi, J.W., Kwon, D.-Y. and Lee, H.-S.
year	2001
title	DesignBUF: Exploring and Extending 2D Boolean Set Operations with Multiple Modes in the Early Design Phase
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 589-602
summary	Boolean set operations have been a powerful design function set for any CAD systems including 2D and 3D domains. Their capacity to provide even more powerful design tools have not, however, been fully explored in the 2D system. The purpose of this study is to further explore 2D Boolean set operations with multiple modes, which include a pick mode, a wait mode, a drag-and-drop mode, and a draw-and-action mode. We develop a prototype design tool, called DesignBUF. It introduces a new concept of “design object buffer,” an intermediate design zone in which a designer freely sketches his/her design with design objects in a brainstorming fashion since valuable design ideas are ephemeral? and the designer needs to generate design schemes rapidly before the ideas disappear or are forgotten. After finishing such fast brainstorming processes, especially in the early design phase, the designer gets a stable and refined form of a floor plan, which in turn becomes a well structured form to maintain building and design information systematically. Therefore, the designer keeps switching back and forth between the “design object buffer” and structured floor plans. We believe that this dual working memory will not only increase system flexibility, but also reduce computation with unnecessarily complex design objects. This study also develops a robust algorithm to transform the intermediate design objects into a well-structured floor plan. In fact, the algorithm is also used for the extended Boolean set operations described above. A structured floor plan can also be transformed into non-structured forms. Research issues for future development are also identified at the end of the paper.
keywords	Design Buffer, Extended Boolean Set Operations, Structured Floor Plan.
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	e869
authors	Lin, Feng-Tyan and Wang, Hunghsiang
year	2001
title	Using APL to Explore the Non-monotonicity in Design Process
doi	https://doi.org/10.52842/conf.ecaade.2001.131
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 131-136
summary	The phenomenon of non-monotonicity is commonly found in design process. In addition to the traditional deductive logic, this article introduces an Abductive Propositional Logic (APL) to capture some characteristics of non-monotonicity. Statements of APL are called beliefs, including believed facts and believed rules, to reflect that they are only true in some situations. Accordingly, beliefs can be deductively true or abductively possible with respect to different reasoning methods. On the other hand, APL employs three retraction rules, namely, exclusive retraction, conclusive retraction, and premise retraction to maintain the consistency. A case study is illustrated.
keywords	Logic, Design Reasoning, Non-Monotonicity, Abduction
series	eCAADe
email
last changed	2022/06/07 07:59

_id	97bd
authors	Wu, J., Zhang, T. Zhang, X. and Zhou, J.
year	2001
title	A face based mechanism for naming, recording and retrieving topological entities
source	Computer-Aided Design, Vol. 33 (10) (2001) pp. 687-698
summary	One of the principal tasks of history based parametric modeling is to maintain the design history of parts. When some constrains or definitions of a feature on the part aremodified, it should be guaranteed that its design history could be replayed automatically and correctly. Thus the users can get the desired part expediently, quickly andunambiguously. Topological naming mechanism is one of the main important technologies to fulfill this task. In order to solve this problem, this paper first analyzes thedesign history of parts, then presents a face based mechanism for naming, recording and retrieving topological entity and finally proposes a method named parametricspace information to solve ambiguity when recording and retrieving entities. This mechanism, which provides a solid basis for replaying the design history precisely, hasbeen implemented in InteSolid, a history and feature based modeling system.
keywords	Topological Name, Design History, Feature And History Based Design
series	journal paper
email
last changed	2003/05/15 21:33

_id	4b30
authors	Ahmad Rafi, M.E. and Mohd Fazidin, J.
year	2001
title	ARMY WAR GAME SIMULATION (AWAS) system - Utilising architectural knowledge in virtual environments
doi	https://doi.org/10.52842/conf.caadria.2001.435
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 435-438
summary	This research briefly examines the importance of collaborative design in developing a multi-user, multi-tiered, networked and real-time information base system. Aspects such as navigation, interaction, communication, movements (objects or virtual camera), control, level of details, spatial design and virtual spaces will be explained to show their importance in the development of virtual world. This paper will further explore the aspects of collaborative design in the context of Army War Game Simulation System (AWAS). A generic collaborative design-based framework will be demonstrated to simulate the overall operations of a war in command-control structure of the force.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	8c2d
authors	Alvarado, Rodrigo García
year	2001
title	PROJECTED SPACE: CHARACTERIZING THE “CYBRID ARCHITECTURE”.
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 285-287
summary	The “cybrid architecture” has been defined like integration of physical and digital spaces. Based on the capability of electronic media to generate virtual environments (cyberspaces) which could be related to buildings. However, theoretical studies and contemporary works reveal a more complex relationship between media and constructions. Expressed in architectural characteristics that constitutes a new spatial quality, named here projected space. Hence the paper argues that “cybrid architecture” is not technological, but is a modification of conventional architectural space due to cultural evolution.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	174f
authors	Bakker, N.H.
year	2001
title	Spatial Orientation in Virtual Environments
source	Delft University of Technology
summary	Recently, a growing interest can be detected in the application of Virtual Environment (VE) technology as an operator interface. VEs are three-dimensional computer-generated images that can be shown on a conventional monitor, on a large screen display, or on a head-mounted display. In order to use these three-dimensional interfaces for finding and retrieving information, the user must be able to spatially orient themselves.Different types of VE technology are available for navigating in these VEs, and different types of navigation can be enabled. A choice has to be made between the different options to enable good spatial orientation of the user. There are two main types of VE interfaces: an immersive interface that provides rich sensory feedback to the user when moving around in the VE, and a non-immersive interface that provides only visual feedback to the user when moving around in the VE. Furthermore, navigation through the VE can either be continuous providing fluent motion, or can be discontinuous which means that the viewpoint is displaced instantaneously over a large distance.To provide insight into the possible effects of these options a series of nine experiments was carried out. In the experiments the quality of spatial orientation behaviour of test subjects is measured while using the different types of interface and the different types of navigation.The results of the experiments indicate that immersive navigation improves the perception of displacement through the VE, which in turn aids the acquisition of spatial knowledge. However, as soon as the spatial layout of the VE is learned the two types of navigation interface do not lead to differences in spatial orientation performance. A discontinuous displacement leads to temporary disorientation, which will hinder the acquisition of spatial knowledge. The type of discontinuous displacements has an effect on the time needed for anticipation. The disorienting effects of a discontinuous displacement can be compensated for by enabling cognitive anticipation to the destination of the displacement.These results suggest that immersive navigation might only be beneficial for application domains in which new spatial layouts have to be learned every time or in domains where the primary users are novices. For instance, in training firemen to teach them the layout of new buildings with VE, or in using architectural walkthroughs in VE to show new building designs to potential buyers. Discontinuous movement should not be allowed when exploring a new environment. Once the environment is learned and if fast displacement is essential then discontinuous displacement should be preferred. In this case, the interface designer must make sure that information is provided about the destination of a discontinuous displacement.
series	thesis:PhD
last changed	2003/11/21 15:16

_id	ddss2004_ra-177
id	ddss2004_ra-177
authors	Ballas, D., R. Kingston, and J. Stillwell
year	2004
title	Using a Spatial Microsimulation Decision Support System for Policy Scenario Analysis
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 177-191
summary	This paper discusses the potential of a spatial microsimulation-based decision support system for policy analysis. The system can be used to describe current conditions and issues in neighbourhoods, predict future trends in the composition and health of neighbourhoods and conduct modelling and predictive analysis to measure the likely impact of policy interventions at the local level. A large dynamic spatial micro-simulation model is being constructed for the population of Leeds (approximately 715,000 individuals) based on spatial microsimulation techniques in conjunction with a range of data, including 2001 Census data for Output Areas and sample data from the British Household Panel Survey. The project has three main aims as follows: (i) to develop a static microsimulation model to describe current conditions in Leeds; (ii) to enable the performance of ‘What if?’ analysis on a range of policy scenarios; and (iii) to develop a dynamic microsimulation model to predict future conditions in Leeds under different policy scenarios. The paper reports progress in meeting the above aims and outlines the associated difficulties and data issues. One of the significant advantages of the spatial microsimulation approach adopted by this project is that it enables the user to query any combination of variables that is deemed desirable for policy analysis. The paper will illustrate the software tool being developed in the context of this project that is capable of carrying out queries of this type and of mapping their results. The decision support tool is being developed to support policy-makers concerned with urban regeneration and neighbourhood renewal.
keywords	Spatial Microsimulation, Spatial Decision Support Systems, Geotools
series	DDSS
last changed	2004/07/03 22:13

_id	8646
authors	Barelkowski, Robert
year	2001
title	Referential Information Systems as a Source of Architectural Design Solutions in P.R.S. Method
doi	https://doi.org/10.52842/conf.ecaade.2001.486
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 486-492
summary	The paper presents the work on planning procedures improved with basic information technology mechanisms. These procedures are extended according to P.R.S. method, containing three main elements: planning, references and seminars. The focus is on references to show four different appearances of referential data. Paper snapshots the theoretical background of reference, its methodological implementation with computer techniques support, practical formulation, collecting and composition of reference and finally the impact, references can have on architectural design solutions.
keywords	Spatial Planning, Planning Methods, GIS, CAD, Spatial References
series	eCAADe
email
last changed	2022/06/07 07:54

_id	5cf4
id	5cf4
authors	Barrionuevo, Luis F.
year	2004
title	LOS "SPIROSPACES"
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 179-187.
summary	This paper deals with “Spirospaces”. These are a conversion to the third dimension of the two dimensional geometric entities called “Spirolaterals”. Abelson, Harold, diSessa and Andera (1968) gave the first rules concerning Spirolaterals. To obtain a Spirolateral from a set of straight lines, the first of them must be one unit long and the following must be incremented one unit at each step, at the same time that they turn in a constant direction. Odds (1973) establish the variation of the rotation direction, either to the left or the right. However, he did not give a mathematical relation able to calculate open Spirolaterals. Krawczyk (2001) developed a computer program that generates Spirolaterals following the method suggested by Abelson. These are Spirolaterals obtained by enumeration without a predictive mathematical formula. Krawczyc went farther proposing Spirolaterals based in curved lines. He pointed out that there are a variety of spirolateral forms that have architectural potentiality. Following this, the architectural potentiality of Spirolaterals is the basis of this paper. To take advantage of that potentiality a computer program was implemented to generate spatial configurations based in Spirolaterals. When a third dimension is given to the Spirolaterals they become Spirospaces. These new entities need spatial and design parameters to be useful for architectural purposes. Barrionuevo and Borsetti (2001) gave results about that work establishing the concept of Spirospaces. The aim of this paper is to describe a work directed to improve rules and procedures concerning Spirospaces. It is expected that these procedures governed by the proposed rules can be employed as tools during the early steps in the architectural design process. In this work some aspects concerning Spirospaces are considered. First, Spirolaterals are presented as the predecessors of Spirospaces. Second, Spirospaces are defined, together with their structural parameters. Architectural modeling is studied at the light of two special elements of the Spirospaces: Interstitial spaces and Object spaces. Next, a computer program is presented as the appropriate tool to model configurations having architectural potentiality. Finally, the results obtained running the computer program are analyzed to determine their possible use as architectural forms. Several graphic illustrations are presented showing steps going from the exploration of spatial alternatives to the selection of a specific configuration to be developed. It is expected that the described computer program could be employed as a design aid tool. As the operation of the program generates a variety of spaces able to dwell architectural objects, it eases the search of configurations suitable to specific functions. The results obtained have the possibility of being exported to computer graphic applications able to add materials, lights and cameras.
keywords	Spirolaterals, Spirospaces, architectural spaces, interstitial spaces, objectual spaces
series	other
type	normal paper
email
last changed	2005/04/07 15:34

_id	6559
authors	Barrionuevo, Luis F. and Borsetti, Ricardo
year	2001
title	LA POTENCIALIDAD ESPACIAL DE LOS "SPIROLATERALS" EN LA ARQUITECTURA (The Spacial Potential of the "Spirolaterals" in Architecture)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 74-76
summary	“Spirolaterals” (Odds, 1973) are mathematical entities created by drawing a set of lines, the first at a unit length, then each additional line increasing by a value of certain longitude while turning a constant or variable direction. (Krawczyk, 2000) The objective of this work is to propose the use of spirolaterals as a geometric support to produce preliminary alternatives for architectural layouts. A computation program is implemented to demonstrate the automatic production of spatial spirolaterals: spirospace, and images of results are exposed.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	1b10
id	1b10
authors	Bay, Joo-Hwa
year	2001
title	Cognitive Biases - The case of tropical architecture
source	Delft University of Technology
summary	This dissertation investigates, i) How cognitive biases (or illusions) may lead to errors in design thinking, ii) Why architects use architectural precedents as heuristics despite such possible errors, and iii) Develops a design tool that can overcome this type of errors through the introduction of a rebuttal mechanism. The mechanism controls biases and improves accuracy in architectural thinking. // The research method applied is interdisciplinary. It employs knowledge from cognitive science, environmental engineering, and architectural theory. The case study approach is also used. The investigation is made in the case of tropical architecture. The investigation of architectural biases draws from work by A. Tversky and D. Kahneman in 1982 on “Heuristics and biases”. According to Tversky and Kahneman, the use of heuristics of representativeness (based on similarity) and availability (based on ease of recall and imaginability) for judgement of probability can result in cognitive biases of illusions of validity and biases due to imaginability respectively. This theory can be used analogically to understand how errors arise in the judgement of environmental behaviour anticipated from various spatial configurations, leading to designs with dysfunctional performances when built. Incomplete information, limited time, and human mental resources make design thinking in practice difficult and impossible to solve. It is not possible to analyse all possible alternative solutions, multiple contingencies, and multiple conflicting demands, as doing so will lead to combinatorial explosion. One of the ways to cope with the difficult design problem is to use precedents as heuristic devices, as shortcuts in design thinking, and at the risk of errors. This is done with analogical, pre-parametric, and qualitative means of thinking, without quantitative calculations. Heuristics can be efficient and reasonably effective, but may not always be good enough or even correct, because they can have associated cognitive biases that lead to errors. Several debiasing strategies are discussed, and one possibility is to introduce a rebuttal mechanism to refocus the designer’s thinking on the negative and opposite outcomes in his judgements, in order to debias these illusions. The research is carried out within the framework of design theory developed by the Design Knowledge System Research Centre, TUDelft. This strategy is tested with an experiment. The results show that the introduction of a rebuttal mechanism can debias and improve design judgements substantially in environmental control. The tool developed has possible applications in design practice and education, and in particular, in the designing of sustainable environments.
keywords	Design bias; Design knowledge; Design rebuttal; Design Precedent; Pre-parametric design; Tropical architecture; Sustainability
series	thesis:PhD
type	normal paper
email
last changed	2006/05/28 07:42

For more results click below: