Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 464

Reformat results as: short short into frame detailed detailed into frame

_id	ga0108
id	ga0108
authors	Caicco, Gregory P.
year	2001
title	Cunning Crafts or Poetic Place-Making? Towards a Historiography of Generative Art
source	International Conference on Generative Art
summary	This paper begins by considering the meaning and relationship between generativity and art. From there an historical analysis of these terms maps out the philosophical terrain of generative art in practice and theory. It is hypothesized that the degree to which a generativity, or birthing, may be understood as inherent in art understood as a poetic making, is the degree to which the term generative becomes a redundant qualifier of the term art. An argument is then made that art and art-making as a poetic production has an ethical vocation to critique its sources and its media in order to imagine worlds where the marginalized other, as other, is received. As a result, the unqualified adoption of computer, machine, biologicalor chemical media, as well as the mathematic or pragmatic instructions that define the execution of their works, needs to be questioned.I conclude with an historiographical examination of the Babylonian abacus and the medieval ars memoritiva, in particular, Ramon Lull’s 1274 figura universalis. Even though computing historians have claimed these as proto-computers, a deeper examination of their meaning, use and context reveal a fundamentally mimetic vocation that provides the possibility of poetic place-making, as an ethics, which is otherwise absent in thecontemporary microprocessor. The question is therefore raised whether the works presented at “generative art” galleries, websites and conferences such as this may make any claim to poetry, ethics or art per se if their use of mathematics and automation remains uncritical.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ec4d
authors	Croser, J.
year	2001
title	GDL Object
source	The Architect’s Journal, 14 June 2001, pp. 49-50
summary	It is all too common for technology companies to seek a new route to solving the same problem but for the most part the solutions address the effect and not the cause. The good old-fashioned pencil is the perfect example where inventors have sought to design-out the effect of the inherent brittleness of lead. Traditionally different methods of sharpening were suggested and more recently the propelling pencil has reigned king, the lead being supported by the dispensing sleeve thus reducing the likelihood of breakage. Developers convinced by the Single Building Model approach to design development have each embarked on a difficult journey to create an easy to use feature packed application. Unfortunately it seems that the two are not mutually compatible if we are to believe what we see emanating from Technology giants Autodesk in the guise of Architectural Desktop 3. The effect of their development is a feature rich environment but the cost and in this case the cause is a tool which is far from easy to use. However, this is only a small part of a much bigger problem, Interoperability. You see when one designer develops a model with one tool the information is typically locked in that environment. Of course the geometry can be distributed and shared amongst the team for use with their tools but the properties, or as often misquoted, the intelligence is lost along the way. The effect is the technological version of rubble; the cause is the low quality of data-translation available to us. Fortunately there is one company, which is making rapid advancements on the whole issue of collaboration, and data sharing. An old timer (Graphisoft - famous for ArchiCAD) has just donned a smart new suit, set up a new company called GDL Technology and stepped into the ring to do battle, with a difference. The difference is that GDL Technology does not rely on conquering the competition, quite the opposite in fact their success relies upon the continued success of all the major CAD platforms including AutoCAD, MicroStation and ArchiCAD (of course). GDL Technology have created a standard data format for manufacturers called GDL Objects. Product manufacturers such as Velux are now able to develop product libraries using GDL Objects, which can then be placed in a CAD model, or drawing using almost any CAD tool. The product libraries can be stored on the web or on CD giving easy download access to any building industry professional. These objects are created using scripts which makes them tiny for downloading from the web. Each object contains 3 important types of information: · Parametric scale dependant 2d plan symbols · Full 3d geometric data · Manufacturers information such as material, colour and price Whilst manufacturers are racing to GDL Technologies door to sign up, developers and clients are quick to see the benefit too. Porsche are using GDL Objects to manage their brand identity as they build over 300 new showrooms worldwide. Having defined the building style and interior Porsche, in conjunction with the product suppliers, have produced a CD-ROM with all of the selected building components such as cladding, doors, furniture, and finishes. Designing and detailing the various schemes will therefore be as straightforward as using Lego. To ease the process of accessing, sizing and placing the product libraries GDL Technology have developed a product called GDL Object Explorer, a free-standing application which can be placed on the CD with the product libraries. Furthermore, whilst the Object Explorer gives access to the GDL Objects it also enables the user to save the object in one of many file formats including DWG, DGN, DXF, 3DS and even the IAI's IFC. However, if you are an AutoCAD user there is another tool, which has been designed especially for you, it is called the Object Adapter and it works inside of AutoCAD 14 and 2000. The Object Adapter will dynamically convert all GDL Objects to AutoCAD Blocks during placement, which means that they can be controlled with standard AutoCAD commands. Furthermore, each object can be linked to an online document from the manufacturer web site, which is ideal for more extensive product information. Other tools, which have been developed to make the most of the objects, are the Web Plug-in and SalesCAD. The Plug-in enables objects to be dynamically modified and displayed on web pages and Sales CAD is an easy to learn and use design tool for sales teams to explore, develop and cost designs on a Notebook PC whilst sitting in the architects office. All sales quotations are directly extracted from the model and presented in HTML format as a mixture of product images, product descriptions and tables identifying quantities and costs. With full lifecycle information stored in each GDL Object it is no surprise that GDL Technology see their objects as the future for building design. Indeed they are not alone, the IAI have already said that they are going to explore the possibility of associating GDL Objects with their own data sharing format the IFC. So down to the dirty stuff, money and how much it costs? Well, at the risk of sounding like a market trader in Petticoat Lane, "To you guv? Nuffin". That's right as a user of this technology it will cost you nothing! Not a penny, it is gratis, free. The product manufacturer pays for the license to host their libraries on the web or on CD and even then their costs are small costing from as little as 50p for each CD filled with objects. GDL Technology has come up trumps with their GDL Objects. They have developed a new way to solve old problems. If CAD were a pencil then GDL Objects would be ballistic lead, which would never break or loose its point. A much better alternative to the strategy used by many of their competitors who seek to avoid breaking the pencil by persuading the artist not to press down so hard. If you are still reading and you have not already dropped the magazine and run off to find out if your favorite product supplier has already signed up then I suggest you check out the following web sites www.gdlcentral.com and www.gdltechnology.com. If you do not see them there, pick up the phone and ask them why.
series	journal paper
email
last changed	2003/04/23 15:14

_id	f2cf
authors	Madrazo, Leandro
year	2001
title	NETWORKING : a web environment for a collaborative education
source	Stellingwerff, Martijn and Verbeke, Johan (Eds.), ACCOLADE - Architecture, Collaboration, Design. Delft University Press (DUP Science) / ISBN 90-407-2216-1 / The Netherlands, pp. 169-182 [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	NETWORKING is a teaching environment developed in close connection with the course "Sistemas de RepresentaciÛn", which has been carried out for the first time at the E.T.S. d'Arquitectura La Salle, Barcelona, in the academic year 1999/00. It is a web-based environment that promotes the exchange of ideas among students and their capacity to work collaboratively. There is a customized NETWORKING environment for each one of the six themes that made up the course: text, shape, object, image, space and light. In this paper we will discuss two of the six environments: OBJECT and SPACE.
series	other
last changed	2001/09/14 21:30

_id	f95f
authors	Angulo, A.H., Davidson, R.J. and Vásquez de Velasco, G.P.
year	2001
title	Digital Visualization in the Teaching of Cognitive Visualization
doi	https://doi.org/10.52842/conf.acadia.2001.292
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 292-301
summary	Professional design offices claim that our graduates have difficulties with their free-hand perspective drawing skills. This fact, which has become obvious over the last 5 years, is parallel to a clear tendency towards the use of 3-dimensional digital imagery in the projects of our students. Frequently, faculty tends to blame the computer for the shortcomings of our students in the use of traditional media, yet there is no clear evidence on the source of the blame. At a more fundamental level, the visualization skills of our students are questioned. This paper will explain how faculty teaching design communication techniques, with traditional and digital media, are working together in the development of a teaching methodology that makes use of computers in support of our student’s training on cognitive visualization skills, namely; “The Third-Eye Method”. The paper describes the Third-Eye Method as an alternative to traditional methods. As evidence of the benefits offered by the Third-Eye Method, the paper presents the results of testing it against traditional methods among freshman students. At the end, the paper draws as conclusion that computers are not the main source of the problem but a potential solution.
keywords	Pedagogy, Visualization, Media
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia23_v3_129
id	acadia23_v3_129
authors	Ayres, Phil
year	2023
title	Sensitive Scaffolds – Cultivating Spatio-temporal Dialogues with Living Complexes
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	Thank you to the ACADIA team for extending the invitation to come here. For me, it's a really fantastic moment to reconnect with the ACADIA community. I've been dipping in and out of it since -- I think my first ACADIA was in Savannah, Georgia. Does anyone remember what year that was? 2001? 2002? I've been dipping in and out. And I really see this community as a model. You know, we could talk about the Mississippi and how it meanders, and passages of energy and matter and information begin to change. And the ACADIA community meanders across these different territories, but somehow it maintains its particular identity. And that identity, I think, is shrouded within ideals of sharing -- knowledge sharing -- and within a kind of creative design research, you know, rigor, which I find really fascinating.
series	ACADIA
type	keynote
email
last changed	2024/04/17 13:59

_id	5cf4
id	5cf4
authors	Barrionuevo, Luis F.
year	2004
title	LOS "SPIROSPACES"
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 179-187.
summary	This paper deals with “Spirospaces”. These are a conversion to the third dimension of the two dimensional geometric entities called “Spirolaterals”. Abelson, Harold, diSessa and Andera (1968) gave the first rules concerning Spirolaterals. To obtain a Spirolateral from a set of straight lines, the first of them must be one unit long and the following must be incremented one unit at each step, at the same time that they turn in a constant direction. Odds (1973) establish the variation of the rotation direction, either to the left or the right. However, he did not give a mathematical relation able to calculate open Spirolaterals. Krawczyk (2001) developed a computer program that generates Spirolaterals following the method suggested by Abelson. These are Spirolaterals obtained by enumeration without a predictive mathematical formula. Krawczyc went farther proposing Spirolaterals based in curved lines. He pointed out that there are a variety of spirolateral forms that have architectural potentiality. Following this, the architectural potentiality of Spirolaterals is the basis of this paper. To take advantage of that potentiality a computer program was implemented to generate spatial configurations based in Spirolaterals. When a third dimension is given to the Spirolaterals they become Spirospaces. These new entities need spatial and design parameters to be useful for architectural purposes. Barrionuevo and Borsetti (2001) gave results about that work establishing the concept of Spirospaces. The aim of this paper is to describe a work directed to improve rules and procedures concerning Spirospaces. It is expected that these procedures governed by the proposed rules can be employed as tools during the early steps in the architectural design process. In this work some aspects concerning Spirospaces are considered. First, Spirolaterals are presented as the predecessors of Spirospaces. Second, Spirospaces are defined, together with their structural parameters. Architectural modeling is studied at the light of two special elements of the Spirospaces: Interstitial spaces and Object spaces. Next, a computer program is presented as the appropriate tool to model configurations having architectural potentiality. Finally, the results obtained running the computer program are analyzed to determine their possible use as architectural forms. Several graphic illustrations are presented showing steps going from the exploration of spatial alternatives to the selection of a specific configuration to be developed. It is expected that the described computer program could be employed as a design aid tool. As the operation of the program generates a variety of spaces able to dwell architectural objects, it eases the search of configurations suitable to specific functions. The results obtained have the possibility of being exported to computer graphic applications able to add materials, lights and cameras.
keywords	Spirolaterals, Spirospaces, architectural spaces, interstitial spaces, objectual spaces
series	other
type	normal paper
email
last changed	2005/04/07 15:34

_id	1b10
id	1b10
authors	Bay, Joo-Hwa
year	2001
title	Cognitive Biases - The case of tropical architecture
source	Delft University of Technology
summary	This dissertation investigates, i) How cognitive biases (or illusions) may lead to errors in design thinking, ii) Why architects use architectural precedents as heuristics despite such possible errors, and iii) Develops a design tool that can overcome this type of errors through the introduction of a rebuttal mechanism. The mechanism controls biases and improves accuracy in architectural thinking. // The research method applied is interdisciplinary. It employs knowledge from cognitive science, environmental engineering, and architectural theory. The case study approach is also used. The investigation is made in the case of tropical architecture. The investigation of architectural biases draws from work by A. Tversky and D. Kahneman in 1982 on “Heuristics and biases”. According to Tversky and Kahneman, the use of heuristics of representativeness (based on similarity) and availability (based on ease of recall and imaginability) for judgement of probability can result in cognitive biases of illusions of validity and biases due to imaginability respectively. This theory can be used analogically to understand how errors arise in the judgement of environmental behaviour anticipated from various spatial configurations, leading to designs with dysfunctional performances when built. Incomplete information, limited time, and human mental resources make design thinking in practice difficult and impossible to solve. It is not possible to analyse all possible alternative solutions, multiple contingencies, and multiple conflicting demands, as doing so will lead to combinatorial explosion. One of the ways to cope with the difficult design problem is to use precedents as heuristic devices, as shortcuts in design thinking, and at the risk of errors. This is done with analogical, pre-parametric, and qualitative means of thinking, without quantitative calculations. Heuristics can be efficient and reasonably effective, but may not always be good enough or even correct, because they can have associated cognitive biases that lead to errors. Several debiasing strategies are discussed, and one possibility is to introduce a rebuttal mechanism to refocus the designer’s thinking on the negative and opposite outcomes in his judgements, in order to debias these illusions. The research is carried out within the framework of design theory developed by the Design Knowledge System Research Centre, TUDelft. This strategy is tested with an experiment. The results show that the introduction of a rebuttal mechanism can debias and improve design judgements substantially in environmental control. The tool developed has possible applications in design practice and education, and in particular, in the designing of sustainable environments.
keywords	Design bias; Design knowledge; Design rebuttal; Design Precedent; Pre-parametric design; Tropical architecture; Sustainability
series	thesis:PhD
type	normal paper
email
last changed	2006/05/28 07:42

_id	avocaad_2001_10
id	avocaad_2001_10
authors	Bige Tunçer, Rudi Stouffs, Sevil Sariyildiz
year	2001
title	Facilitating the complexity of architectural analyses
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	It is common practice for architecture students to collect documents on prominent buildings relevant to their design task in the early stage of design. While practitioners can rely on a body of design experience of their own, during the process of a new design, students can only draw from the examples of success and failure from other architects. In the past, such precedent based learning was implicit in the master-apprentice relationship common in the educational system. Nowadays academics commonly no longer have the possibility to maintain an extensive design practice, and instead introduce important outside precedents to the students. Thus, the study of important historical precedents or designs plays an important role in design instruction and in the students’ design processes. While there is no doubt that the most effective outcome of such a study would be achieved when the student does entire the study herself, students also benefit from a collaboration with peers, where they form groups to do an analysis of various aspects of a same building or over a group of buildings. By integrating the respective results into a common, extensible, library, students can draw upon other results for comparisons and relationships between different aspects or buildings. The complexity this introduces is best supported in a computer medium.The Web offers many examples of architectural analyses on a wide variety of subjects. Commonly, these analyses consist of a collection of documents, categorized and hyperlinked to support navigation through the information space. More sophisticated examples rely on a database for storage and management of the data, and offer a more complex categorization of the information entities and their relationships. These studies present effective ways of accessing and browsing information, however, it is precluded within these analyses to distinguish and relate different components within the project documents. If enabled, instead, this would offer a richer information structure presenting new ways of accessing, viewing, and interpreting this information. Hereto, documents can be decomposed by content. This implies both expanding the document structure, replacing document entities by detailed substructures, and augmenting the structure’s relatedness with content information. The relationships between the resulting components make the documents inherently related by content.We propose a methodology to integrate project documents into a single model, and present an application for the presentation of architectural analyses in an educational setting. This approach provides the students with a simple interface and mechanisms for the presentation of an analysis of design precedents, and possibly their own designs. Since all the information is integrated within a single environment, students will benefit from each others’ studies, and can draw new conclusions across analyses and presentations from their peers.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	diss_ddssar0211
id	diss_ddssar0211
authors	Brandt, Eva
year	2001
title	Event driven product development – collaboration and learning
source	Dept. of Technology and Social Sciences, Technical University of Denmark
summary	This dissertation is the result of the research project “Event-Driven Product Development: Collaboration and Learning”. It is an industrial Ph.D. project carried out in collaboration between the company Danfoss A/S, and the Institute of Technology and Social Sciences at the Technical University of Denmark; now the Department of Manufacturing Engineering and Management. The research was funded partly by Danfoss A/S and partly by the Danish Academy of Technical Sciences (ATV), who have named the project EF 609. The research project began in February 1996. I have had three supervisors: Thomas Binder and Jacob Buur both of whom represent Danfoss, and Lauge Baungaard Rasmussen from the Institute of Technology and Social Sciences at the Technical University of Denmark.
series	thesis:PhD
email
more	http://space.interactiveinstitute.se/staff/Eva.Brandt/phd.html
last changed	2003/12/15 14:31

_id	2006_182
id	2006_182
authors	Bridges, Alan
year	2006
title	A Critical Review of Problem Based Learning in Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.2006.182
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 182-189
summary	There is limited research and discussion on pedagogical approaches in architectural education, simply because it is considered as one of the “unimportant” areas that researchers “do not bother studying” (Teymur, 2001). Problem Based Learning has been known to provide competent graduates in other professional disciplines, and, consequently, there have been attempts to utilise the same pedagogical approach in architectural education where PBL is seen as a potential solution to the problems encountered in architectural education. This paper critically reviews PBL implementations at TU Delft Netherlands and Newcastle University, N.S.W. Australia and draws conclusions with particular respect to the teaching of architectural computing
keywords	PBL; architecture; computing
series	eCAADe
email
last changed	2022/06/07 07:54

_id	54c0
authors	Cabezas, M., Mariano, C., Oliva, G. and Oliva, S.
year	2001
title	New Technologies Applied toTraining - Evaluation of a New Teaching Methodology for the Descriptive Geometry
doi	https://doi.org/10.52842/conf.ecaade.2001.275
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 275-281
summary	The purpose of this paper is to point out the most relevant aspects of an experience which gathers research processes and teaching practices at a University level, activities in which the authors hereof have been involved for many years. Even though this question has already been widely discussed – being its analysis extremely broad and varied – it is still quite interesting. This issue deals with the incorporation of new technologies in the teaching and learning processes and in the case of this specific experience, it refers to its trial implementation in the classroom.
keywords	Evaluation, Teaching, Geometry, Informatics
series	eCAADe
email
last changed	2022/06/07 07:54

_id	3934
authors	Cabezas, M., Mariano, C., Oliva, G. and Oliva, S.
year	2001
title	EVALUACIÓN DE UNA METODOLOGÍA DE ENSEÑANZA DE LA GEOMETRÍA DESCRIPTIVA (Evaluation of a Methodology for the Teaching of Descriptive Geometry)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 204-206
summary	The purpose of this paper is to point out the most relevant aspects of an experience which gathers research processes and teaching practices at a University level, activities in which the authors hereof have been involved for many years. Even though this question has already been widely discussed – being its analysis extremely broad and varied – it is still quite interesting. This issue deals with the incorporation of new technologies in the teaching and learning processes and in the case of this specific experience, it refers to its trial implementation in the classroom.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	f97e
authors	Commission of the European Communities
year	2001
title	The e-learning action plan: designing tomorrow’s education
source	Communication from the Commission to the Council and the EuropeanParliament, COM(2001) 172 final, 28 March 2001
summary	The "eLearning: Designing tomorrow's education" initiative1 was adopted by the European Commission on 24 May 2000. Following up the conclusions of the Lisbon European Council, it set out the principles, objectives and lines of action of eLearning, defined as the use of new multimedia technologies and the Internet to improve the quality of learning by facilitating access to resources and services as well as remote exchanges and collaboration. The eLearning initiative was welcomed by the Ministers of Education and by the Feira European Council in June 2000. The eLearning initiative is part of the comprehensive eEurope Action Plan2, the aim of which is to allow Europe to exploit its strengths and overcome the barriers holding back the uptake of digital technologies. It also falls in with the Report on the concrete future objectives of education systems3 by adopting information and communication technology development as one of its objectives. The effectiveness of education systems depends entirely on the effectiveness of the approaches to teaching and learning. In order to be effective, the introduction of information and communication technologies will have to be accompanied by a far-reaching reorganisation of learning structures. The eLearning initiative is also of relevance for the candidate countries given the interest they have shown for the eEurope action plan.
series	other
last changed	2003/04/23 15:50

_id	7e02
authors	Elger, Dietrich and Russell, Peter
year	2002
title	The Virtual Campus: A new place for (lifelong) learning?
doi	https://doi.org/10.52842/conf.ecaade.2002.472
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 472-477
summary	472 eCAADe 20 [design e-ducation] Modeling Real and Virtual Worlds Session 13 In the early spring of 2001 a collection of German universities founded a virtual faculty of architecture, which was named „Liquid Campus“. Current thinking about future forms of education in the field of architecture combined with over 4 years of experience with net-based design studios, led to questions about the future of existing universities, their buildings and their use. This problem was put to 43 students in the form of a design exercise to create a place for a virtual university. In the current situation, in which the administration of knowledge is more and more located on the internet, and even the so-called meeting places themselves can be virtualised through the help of video-conference-software, the exercise was to design a virtual campus in the framework and to carry out this design work in a simulation of distributed practice. Initial criticism of the project came from the students in that exemplary working methods were not described, but left for the students to discover on their own. The creation of a concept for the Liquid Campus meant that the participants had to imagine working in a world without the face to face contacts that form the basis (at present) of personal interaction. Additionally, the assignment to create or design possible links between the real and the virtual was not an easy task for students who normally design and plan real physical buildings. Even the tutors had difficulties in producing focused constructive criticism about a virtual campus; in effect the virtualisation of the university leads to a distinctive blurring of its boundaries. The project was conducted using the pedagogical framework of the netzentwurf.de; a relatively well established Internet based communication platform. This means that the studio was organised in the „traditional“ structure consisting of an initial 3 day workshop, a face to face midterm review, and a collective final review, held 3,5 months later in the Museum of Communication in Frankfurt am Main, Germany. In teams of 3 (with each student from a different university and a tutor located at a fourth) the students worked over the Internet to produce collaborative design solutions. The groups ended up with designs that spanned a range of solutions between real and virtual architecture. Examples of the student’s work (which is all available online) as well as their working methods are described. It must be said that the energy invested in the studio by the organisers of the virtual campus (as well as the students who took part) was considerably higher than in normal design studios and the paper seeks to look critically at the effort in relation to the outcomes achieved. The range and depth of the student’s work was surprising to many in the project, especially considering the initial hurdles (both social and technological) that had to overcome. The self-referential nature of the theme, the method and the working environment encouraged the students to take a more philosophical approach to the design problem. The paper explores the implications of the student’s conclusions on the nature of the university in general and draws conclusions specific to architectural education and the role of architecture in this process.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	3386
authors	Gavin, L., Keuppers, S., Mottram, C. and Penn, A.
year	2001
title	Awareness Space in Distributed Social Networks
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 615-628
summary	In the real work environment we are constantly aware of the presence and activity of others. We know when people are away from their desks, whether they are doing concentrated work, or whether they are available for interaction. We use this peripheral awareness of others to guide our interactions and social behaviour. However, when teams of workers are spatially separated we lose 'awareness' information and this severely inhibits interaction and information flow. The Theatre of Work (TOWER) aims to develop a virtual space to help create a sense of social awareness and presence to support distributed working. Presence, status and activity of other people are made visible in the theatre of work and allow one to build peripheral awareness of the current activity patterns of those who we do not share space with in reality. TOWER is developing a construction set to augment the workplace with synchronous as well as asynchronous awareness. Current, synchronous activity patterns and statuses are played out in a 3D virtual space through the use of symbolic acting. The environment itself however is automatically constructed on the basis of the organisation's information resources and is in effect an information space. Location of the symbolic actor in the environment can therefore represent the focus of that person's current activity. The environment itself evolves to reflect historic patterns of information use and exchange, and becomes an asynchronous representation of the past history of the organisation. A module that records specific episodes from the synchronous event cycle as a Docudrama forms an asynchronous information resource to give a history of team work and decision taking. The TOWER environment is displayed using a number of screen based and ambient display devices. Current status and activity events are supplied to the system using a range of sensors both in the real environment and in the information systems. The methodology has been established as a two-stage process. The 3D spatial environment will be automatically constructed or generated from some aspect of the pre-existing organisational structure or its information resources or usage patterns. The methodology must be extended to provide means for that structure to grow and evolve in the light of patterns of actual user behaviour in the TOWER space. We have developed a generative algorithm that uses a cell aggregation process to transcribe the information space into a 3d space. In stage 2 that space was analysed using space syntax methods (Hillier & Hanson, 1984; Hillier 1996) to allow the properties of permeability and intelligibility to be measured, and then these fed back into the generative algorithm. Finally, these same measures have been used to evaluate the spatialised behaviour that users of the TOWER space show, and will used to feed this back into the evolution of the space. The stage of transcription from information structure to 3d space through a generative algorithm is critical since it is this stage that allows neighbourhood relations to be created that are not present in the original information structure. It is these relations that could be expected to help increase social density.
keywords	Algorithmic Form Generation, Distributed Workgroups, Space Syntax
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	d146
authors	He, Jie
year	2001
title	CAD Study in Visual Analysis of the Visual Sustainability for China Urban Natural Landscape Planning
source	Chinese University of Hong Kong
summary	In this thesis a GIS-based CAD system prototype of evaluating visual quality of urban natural landscape environment is presented. This prototype is an indispensable component of the integrative Visual Sustainability research, and offers a calculable and visualizable technique to urban visual natural landscape assessment. This scientific method provides precise data to estimate the visibility of natural landscape in urban construction actuality. Furthermore, it can also work out supporting information for maintaining and protecting valuable visual landscape resources in further planning. Introduction of this methodology intends to improve the natural landscape cooperation in China urban planning through visual protection. Combining with popular CAD software such as AutoCAD and Microstation, the research team uses ArcView GIS software and its 3D Analyst extension to accomplish a set of research procedure, which includes data modification, model making, viewshed and view sensibility analysis. In addition, this system can create simultaneous 3D scenes or hire other information media as reference tools for professional analysis, design consultation and intercommunication. The core technologies of this proposed system are viewshed calculation and overlay analysis. In viewshed analysis, human visual characteristics are simulated by a series of ergonomics parameters of viewpoints. Viewshed of each viewpoint can be calculated into vector data and mapped by polygons identifying which region is visible and which is not. Overlay function of the proposed system is used in visual sensibility analysis to achieve the division of higher visual sensible area which indicates the common visible area from different viewpoints. Additionally, viewshed maps and visual sensibility results can add more information to mark out the areas that can satisfy certain visual parameters such as appropriate visual angle or visual distance. These overlaying results can visualized the visible areas into hierarchical visual perception quality categories in order to define the visual landscape significance of particular planning regions. A case study was operated to evaluate this system. The case is in Zhongshan city, Guangdong Province of China. Jinzishan hill region is the study site that picked by collaborating discussion of research team and the local government. It is located on the edge of urban built-up area. Jinzishan massif is the prominent landscape element of the surrounding environment. There are three topics in Jinzishan visual perception in this paper. The first topic is the visual quality evaluation of the intersections of its surrounding road system. The second is the integrated visual perception of two main roads called Qiwandao and Bo‚Äôailu. Finally is the analysis of the hill skyline visual quality in surrounding area. The analysis results in GIS vector data can be converted into popular data format and combined with other spatial information for practical application. And comments for future urban planning are collected and analyzed by professional responses to the computer-generated information investigation.
keywords	Natural Landscaping; Computer-Aided Design; Landscape Architecture; City Planning; Geographic Information Systems
series	thesis:MSc
email
last changed	2003/02/12 22:37

_id	8599
authors	Heylighen, Ann and Neuckermans, Herman
year	2001
title	Baptism of fire of a Web-based design assistant
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 111-124
summary	DYNAMO – a Dynamic Architectural Memory On-line – is a Web-based design assistant to support architectural design education. The tool is conceived as an (inter-)active workhouse rather than a passive warehouse: it is interactively developed by and actively develops its users' design knowledge. Its most important feature is not merely that it presents students with design cases, but that those cases trigger in-depth explorations, stimulate reflection and prime discussions between students, design teachers and professional architects. Whereas previous papers have focused on the theoretical ideas behind DYNAMO and on how Web-technology enabled us to translate these ideas into a working prototype, this paper reports on the prototype's baptism of fire in a 4th year design studio. It describes the setting and procedure of the baptism, the participation of the studio teaching staff, and the reactions and appreciation of the students. Based on students' responses to a questionnaire and observations of the tool in use, we investigated whether DYNAMO succeeded in engaging students and what factors stimulated/hampered this engagement. Despite the prototype nature of the system, students were noticeably enthusiastic about the tool. Moreover, DYNAMO turned out to be fairly 'democratic', in the sense that it did not seem to privilege students with private access to or prior knowledge of computer technology. However, the responses to the questionnaire raise questions about the nature of students' engagement. Three factors revealed themselves as major obstacles to student (inter-)action: lack of time, lack of encouragement by the teachers and lack of studio equipment. Although these obstacles may not relate directly to DYNAMO itself, they might have prevented the tool from functioning the way it was originally meant to. The paper concludes with lessons learned for the future of DYNAMO and, more in general, of ICT in architectural design education.
keywords	Design Studios, Utilization Of Internet, Design Support, Case-Based Design
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	668b
authors	Heylighen, Ann
year	2001
title	End, means and method - Three roles of design(ing) technology in design research
source	Digital Creativity, Volume 12, No. 2, 2001 (ISSN 1462-6268), pp. 103-105
summary	This article explores an approach to design research in which the development of design technology plays a key role. It presents the author's Ph.D. research on the role of cases in architectural design. The research aimed at investigating the applicability of Case-Based Design (CBD) to the domain of architecture. To this end, the author adopted and confronted different stakeholder perspectives, one of which is that of CBD technology developer. By consequence, a considerable part of the research covers the design, implementation and evaluation of a CBD tool to support architects/designers. The research did not have a strictly instrumental aim, but wanted to provide insights for the field of architectural design on both a theoretical and a technological level. While the tool itself aimed at providing architects with valuable design support, making the tool was used as a method to develop a better understanding of current CBD technology. Moreover, the resulting tool turned out to be an effective means to examine the role and impact of cases in architectural design. Rather than reporting on the outcome of the research, the main objective of the article is to make a methodological reflection on the possibilities and limitations of this approach.
keywords	Design Research, Architectural Design, CAAD, Case-Based Design
series	journal paper
email
last changed	2002/11/14 08:38

_id	25b2
authors	Kosasih, Sahrika
year	2001
title	The Research on the Relevance of the Computer Applications - Experiences from Indonesia
doi	https://doi.org/10.52842/conf.ecaade.2001.282
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 282-287
summary	Although CAD subject still is a subsidiary subject, there has been higher interest of students in the subject. Of 300 students at Department of Architecture, 50 students take the subject every semester. The research on the relevance of the computer application can be carried out thanking to the establishment of a CAD laboratory as a supporting facility of the Department of Architecture which was established in 1999 through QUE Program (Quality Undergraduate Educative) granted by the World Bank in undergraduate program proposal selection in Indonesia. It can therefore be identified how well students can improve their talents and skills in design subject. The laboratory is used not only in educational activities, it is also used to develop the computer application in design especially 2D and 3D design and the perspective drawing presentation.
series	eCAADe
email
last changed	2022/06/07 07:51

For more results click below: