Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 717

Reformat results as: short short into frame detailed detailed into frame

_id	12e3
authors	Ahmad Rafi, M.E., Che Zulkhairi, A. and Karboulonis, P.
year	2002
title	Interactive Storytelling and Its Role in the Design Process
doi	https://doi.org/10.52842/conf.caadria.2002.151
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 151-158
summary	Projects of ever increasing complexity and size have incited the need for new and robust design methodologies and tools in an effort to manage complexity, lower costs, ascertain quality and reduce risk. Technology convergence through the growing availability of networked computers, rapid progress in Computer Aided Design (CAD) and information management have encouraged the undertaking of even more complex designs that demand high degrees of interaction, collaboration and the efficient sharing and dissemination of information. It is suggested that interactive storytelling and interactive design (Rafi and Karboulonis, 2001) techniques that use non-linear information mapping systems can be deployed to assist users as they navigate information that is structured to address localized needs as they arise. The design process is a collaborative effort that encompasses diverse knowledge disciplines and demands the management and utilization of available resources to satisfy the needs of a single or set of goals. It is thought that building industry specialists should work close together in an organised manner to solve design problems as they emerge and find alternatives when designs fall short. The design process involves the processing of dynamic and complex information, that can be anything from the amount of soil required to level lands - to the needs of specific lightings systems in operation theatres. Other important factors that affect the design process are related to costs and deadlines. This paper will demonstrate some of our early findings in several experiments to establish nonlinear storytelling. It will conclude with a recommendation for a plausible design of such a system based on experimental work that is currently being conducted and is reaching its final stages. The paper will lay the foundations of a possible path to implementation based on the concept of multi-path animation that is appropriate for structuring the design process as used in the building industry.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	3e51
authors	Cerulli, C., Peng, C. and Lawson, B.
year	2001
title	Capturing Histories of Design Processes for Collaborative Building Design Development. Field Trial of the ADS Prototype
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 427-437
summary	The ADS Project - Advanced Design Support for the Construction Design Process - builds on the technological results of the previous COMMIT Project to exploit and demonstrate the benefits of a CAD based Design Decision Support System. COMMIT provides a system for storing knowledge about knowledge within the design process. It records design decisions, the actors who take them and the roles they play when doing so. ADS links COMMIT to an existing object-oriented CAD system, MicroStation/J from Bentley Systems. The project focuses on tackling the problem of managing design information without intruding too much on the design process itself. It provides the possibility to effectively link design decisions back to requirements, to gather rationale information for later stages of the building lifecycle, and to gather knowledge of rationale for later projects. The system enables members of the project team, including clients and constructors, to browse and search the recorded project history of decision making both during and after design development. ADS aims to facilitate change towards a more collaborative process in construction design, to improve the effectiveness of decision-making throughout the construction project and to provide clients with the facility to relate design outcomes to design briefs across the whole building life cycle. In this paper we will describe the field trials of the ADS prototype carried out over a three-month period at the Building Design Partnership (BDP) Manchester office. The objective of these trials is to assess the extent, to which the approach underlying ADS enhances the design process, and to gather and document the views and experiences of practitioners. The ADS prototype was previously tested with historical data of real project (Peng, Cerulli et al. 2000). To gather more valuable knowledge about how a Decision Support System like ADS can be used in practice, the testing and evaluation will be extended to a real project, while it is still ongoing. The live case study will look at some phases of the design of a mixed residential and retail development in Leeds, UK, recording project information while it is created. The users’ feedback on the system usability will inform the continuous redevelopment process that will run in parallel to the live case study. The ADS and COMMIT Projects were both funded by EPSRC.
keywords	Design Rationale, Design Support Systems, Usability Evaluation
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	158e
authors	De Vries, B., Van Leeuwen, J. and Achten, H. (Eds.)
year	2001
title	Computer Aided Architectural Design Futures 2001
source	Proceedings of the Ninth International Conference [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, 814 p.
summary	CAAD Futures is a bi-annual conference that aims to promote the advancement of computer-aided architectural design in the service of those concerned with the quality of the built environment. The conferences are organized under the auspices of the CAAD Futures Foundation, which has its secretariat at the Eindhoven University of Technology in the Netherlands. This volume provides state-of-the-art articles in the following areas: capturing design, information modelling, CBR techniques, Virtual Reality, CAAD education, (hyper) media, design evaluation, design systems development, collaboration, generation, design representation, knowledge management, form programming, simulation, architectural analysis, and urban design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/2001
last changed	2003/04/02 10:52

_id	993b
authors	Seebohm, Thomas
year	2001
title	The Ideal Digital Design Curriculumn: Its Bases and its Content
doi	https://doi.org/10.52842/conf.ecaade.2001.180
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 180-185
summary	There is a potential for the computer to fundamentally change the design process towards a more holistically conceived architecture. One of these directions is the use of software to develop form and the other concerns the use of software that embodies specialist knowledge including design knowledge. Software embodying knowledge will be the capital of the future. As this software becomes more user-friendly it will give architects new power to bring together a multitude of issues in a holistic way without themselves being specialists. A prerequisite for this fundamental change in the design process is an architectural design curriculum that is broader than before and integrates computing across disciplines. In effect, the intention is to educate a new type of Renaissance architect
keywords	Architectural Curriculum, Simulation Software, Expert Systems, Digital Design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cf2003_m_040
id	cf2003_m_040
authors	BAY, Joo-Hwa
year	2003
title	Making Rebuttals Available Digitally for Minimising Biases in Mental Judgements
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 147-156
summary	The problem of heuristic biases (illusions) discussed by Tversky and Kahneman (1982) that can lead to errors in judgement by human designers, when they use precedent knowledge presented graphically (Bay 2001). A Cognitive framework of belief, goal, and decision, and a framework of representation of architectural knowledge by Tzonis are used to map out the problem of heuristic biases in the human mind. These are used to discuss what aspects of knowledge can be presented explicitly and digitally to users to make rebuttal more available for human thinking at the cognitive level. The discussion is applicable to both inductive and analytic digital knowledge systems that use precedent knowledge. This discussion is targeted directly at means of addressing bias in the human mind using digital means. The problem of human bias in machine learning and generalisation are discussed in a different paper, and the problems of international or non-intentional machine bias are not part of discussion in this paper.
keywords	analogy, bias, design thinking, environmental design, heuristics
series	CAAD Futures
last changed	2003/11/22 07:26

_id	0f49
authors	Burry, M., Coulson, J., Preston, J. and Rutherford, E.
year	2001
title	Computer-aided design decision support: interfacing knowledge and information
source	Automation in Construction 10 (2) (2001) pp. 203-215
summary	Computer-aided design decision support has proved to be an elusive and intangible project for many researchers as they seek to encapsulate information and knowledge-based systems as useful multifunctional data structures. Definitions of `knowledge', `information', `facts', and `data' become semantic footballs in the struggle to identify what designers actually do, and what level of support would suit them best, and how that support might be offered. The Construction Primer is a database-drivable interactive multimedia environment that provides readily updated access to many levels of information aimed to suit students and practitioners alike. This is hardly a novelty in itself. The innovative interface and metadata structures, however, combine with the willingness of national building control legislators, standards authorities, materials producers, building research organisations, and specification services to make the Construction Primer a versatile design decision support vehicle. It is both compatible with most working methodologies while remaining reasonably future-proof. This paper describes the structure of the project and highlights the importance of sound planning and strict adhesion to library-standard metadata protocols as a means to avoid the support becoming too specific or too paradigmatic.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	7ffb
authors	Ciftcioglu, Özer and Durmisevic, Sanja
year	2001
title	Knowledge management by information mining
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 533-545
summary	Novel information mining method dealing with soft computing is described. By this method, in the first step, receptive fields of design information are identified so that connections among various design aspects are structured. By means of this, complex relationships among various design aspects are modeled with a paradigm, which is non-parametric and generic. In the second step, the structured connections between various pairs of aspects are graded according to the relevancy to each other. This is accomplished by means of sensitivity analysis, which is a computational tool operating on the model established and based on a concept measuring the degree of dependencies between pairs of quantities. The degree of relationships among various design aspects so determined enables one to select the most important independent aspects in the context of design or decision-making process. The paper deals with the description of the method and presents an architectural case study where numerical and as well as non-numerical (linguistic) design information are treated together, demonstrating a ranked or elective information employment which can be of great value for possible design intervention during reconstruction.
keywords	Knowledge Management, Information Mining, Sensitivity Analysis
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	e4a7
authors	Espina B., Jane J.
year	2001
title	La tecnologia digital en las edificaciones arquitectonicas de la modernidad [The Digital Tecnology In Modern Architectural Constructions]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 136-145
summary	This paper gives an overview of the experience developed by Computer Graphics II course of department of Communication in School of Architecture and Design of University of Zulia which was initiated since 1999.The work describes the methodology used by two groups of objectives: general of the course and those generated by experiences in two levels: one as analysis instruments and the other one during process of design. Course is looking for trainning in CAD system uses by 3D representation of modern buildings, so at the end of the experience students were succeed : 1) analysis of projects of modern architecture, 2) quick visualization and efficient volumetric representation, 3) make a digital format library of differents buildings of the city and 4) comprehension and historic knowledge of city. CAD systems used for representation of 2d and 3D drawings offer to architects tools as color, textures, shadows, plus generation of different points of view as isometrics, perspectives and realistic representations. The digital format of the selected buildings gives to drafts an additional value.
keywords	Modern Architecture; Three-Dimensional; Realistic Representation; CAD Systems; Digital Format
series	other
email
last changed	2003/02/14 08:29

_id	cf2007_585
id	cf2007_585
authors	Fischer, Thomas
year	2007
title	Enablement or Restriction? On supporting others in making (sense of things)
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 585-598
summary	In this paper I present and reflect upon a five-year investigation of designing digital tools for designing in the area of architectural space grid structures. I understand design as a novelty and knowledge generating conversational process as described by Pask (see Scott 2001) and Glanville (2000). Furthermore, I regard making design tools as a design task in itself, rendering this paper a reflection on designing for designing. This paper gives a report on observations I made during the toolmaking study, and subsequently contextualizes these observations using second-order cybernetic theory. This reflection focuses on different relationships between observers and systems, on conditions under which observers construct knowledge and on limits of supporting others in this activity.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	avocaad_2001_11
id	avocaad_2001_11
authors	Gernot Pittioni
year	2001
title	Handling of Complex Projects As Engineering-Partner of Planning Groups
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The collaborative handling of design activities is a growing matter of present planning processes. Most planning partners in the meantime have agreed on using CAD-systems. The common use of the design information is a vital factor which enables us to handle complex problems.The instruments offered by the CAD-systems are performing on a very low level. Many intelligent features get lost by data-transfer. But experience shows that more obstacles are built up by ineffective and insufficient use of the CAD-system and their properties.Huge efforts have to be done in improving the knowledge and the handling abilities of many users. They often do not even know that they are not using their systems in an appropriate way. In fact looking only at the plotted results nobody would guess that the data sometimes are entirely worthless for common use. This only turns out when complex projects rely on timesaving common data use and the partners get stuck in endless difficulties trying to get some information out of badly organised project files.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_06
id	avocaad_2001_06
authors	Giovanni De Paoli
year	2001
title	Architectural design and procedural models - A radical change of language to design in architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The history of architecture and its teaching clearly reveal how representations of the image and drawing have changed over centuries. Today, computers are increasingly found at the desks of architecture professionals and students, but their usage remains restricted to technical functions and what is commonly known as CAD (computer-assisted design), in architecture is often simply the other CAD (computer-assisted drawing).This presentation deals with architectural design, particularly at its earliest stage. Our objective is to propose a model for describing the architectural concept that meets the needs of architects through software. Only then will they really be able to use computers as an aid to design by overcoming the obstacles that presently keep us from making full use of them.This has led me to propose an avenue of exploration that examines projection through an object’s properties, and a method of computer-assisted design that makes use of procedural models. These procedural models consist of geometric operators and operators that define the properties, characteristics and performance of a building — operators which I have termed “semantic”.This research fits into a paradigm that leads to representation of the building through functions that can be called with parameters and encapsuled in an algorithm, making it possible to create procedural models that assist with the design. This approach opens up a means of integrating the logos with the figurative representation where drawing is used instead of words to convey the architectural concept.The example of a procedural model shows how we can use a generic model to produce a volume model with all the characteristics belonging to the same family of objects. This type of model can serve not only to illustrate the result of a process, or to draw connections among buildings on the basis of their construction process, or to test the validity of a rule typical of a set of objects, but also to integrate, through a functional language, semantic operators which to date have been excluded from the initial design phase. This descriptive mechanism is extremely powerful in making it possible to establish relationships among the functions and properties of a building and the purpose of the architectural project.The scientific contribution of this research is to test the hypothesis that we can use computer tools to manipulate operators which enable the architect to reappropriate a complex design of the building, and open up new lines of investigation into integrating geometric and knowledge-based systems into a unified representation. The declarative approach for creating three-dimensional scenes fits into this perspective.It is now a matter of exploring the possibility of working on a “common morphology” shared by everyone involved in the design process by rewriting the functions or by converting the functions used for representation, or else through a functional dialect (language) that allows for dialectic relationships among all types of operators and the actions of the protagonists in the architectural design process.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_08
id	avocaad_2001_08
authors	Ivanka Iordanova, Temy Tidafi
year	2001
title	Design assistance by complexity-supporting precedents' modelling
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design processes imply complexity at every stage of the development of a project. On one hand, this complexity is rarely taken into consideration by the currently used CAD programs. On the other hand, recent theoretical researches indicate that a large proportion of architectural design processes are based on precedents as a source of inspiration or as a basis for reflection. A precedent is usually seen as a sketch, as a picture, as a drawing or as a visual memory of an architectural object or space. Recent research enlarges this concept into at least two directions: (1) precedents are looked for not only in the architectural space, and (2) it’s not only the visual aspect of a precedent that is important, but also its internal logic and structure, the know-how associated to it, and the actions needed for its creation. Usually, architectural design knowledge is implicitly presented by precedents. This design knowledge is applied to design-objects having various levels of generality, at different states of detailing and expected to be dynamically transformed during the following stages of design. Having in mind these characteristics of precedents called for during the architectural design process, we propose to join their visual representation with a description of their most important characteristics: structural organisation, way of production, functional organisation, spatial composition, etc. These can be either described or modelled by the original author, or interpreted by the precedent’s ‘user’. These design-knowledge models can be of use in several ways: (1) providing a library for search of precedents by semantic analogy, (2) offering ready-to-use capsules of design knowledge for new design situations, (3) enriching the ‘design world’ of the user-architect. We have implemented the proposed method of complexity-supporting precedents’ modelling by the means of the functional programming SGDL-Scheme language. The models (a programming function or a structure of programming functions) describe the actions necessary for the creation of an object (or its digital representation) and the structural organisation between the models in order to generate new, more complex ones. The concept of describing actions instead of shapes, provides a multi-level applicability of the models. Visual presentations (digital maquettes, images or animations) of newly generated objects can be stored in a visual-library of the assistant, thus creating a new ‘precedent’ that can be referred to in future by visual analogy. The design-knowledge that has generated the new object, is stored and linked to the image. Thus, the visual stimulus of a precedent can be joined with functional characteristics, production procedures and/or semantic meaning of the object. The paper will present the ‘engine’ of the proposed assistant, its organisation, as well as digital models of precedents that have served as a basis for the design of new architectural objects or structures. The assistant is conceived as an open, complexity supporting structure that can be further developed by the ‘user-architect’. We will discuss the advantages and limitations of the proposed assistant.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	6430
authors	Jabi, Wassim (Ed.)
year	2001
title	ACADIA 2001 [Conference Proceedings]
doi	https://doi.org/10.52842/conf.acadia.2001
source	Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1/ Buffalo (New York) 11-14 October 2001, 415 p.
summary	The theme, which preceded my knowledge of ACADIA’s true age, resulted from a realization regarding the development and current state of CAD in Research, Education, and Practice. While I only got involved with ACADIA in the last half of its current life to date, I had the honor of studying with some of the early pioneers of CAD: 1) Harold Borkin, a founding member of ACADIA, 2) Jim Turner, a longtime ACADIAn, and a past ACADIA Conference organizer (actually the very first conference I attended), and 3) Ted Hall, another longtime ACADIAn. What I have learned from conversations with them and later witnessed for myself is a fundamental shift of focus in CAD from building tools to using tools. That is, while early CAD students, including myself, used to learn how to create software and tools to solve a particular problem, the current focus in the majority of schools that include a CAD component in their curriculum is on teaching the use of commercial software and/or the use of digital media in the design studio. One need only take a look at old list of courses that used to be offered in the CAD area and compare it with a new list to see this shift. Yet, one form of tool building that is continuing in a significant number of schools is the creation of scripts or small software modules (usually built using a visual editor) to create interactive systems for delivery over the web or on CD-ROM. Examples include the use of Macromedia Director or Flash for creating interactive digital titles. While this current state of affairs has increased the receptivity to digital tools and media, it does obscure an important fact. For knowledge to advance in this area, we need researchers who can not only use tools, but also invent new ones to solve new problems that are not addressed by the existing crop of commercial software. The more time we spend not educating our students in the art and science of building digital tools, the harder it will be to: 1) find teachers in the future with those skills, 2) advance and influence the development of the state-of-the-art in CAD, and 3) erase the use of CAD as a euphemism for slick computer-generated imagery. While not common, the tradition of tool building is still going on most notably in architecture schools with strong financial resources and those that offer doctoral level education. Commercial, governmental and business/education entities are also continuing the research tradition of tool building. ACADIA, as a reflection of the field it focuses on, has widened its scope to solicit papers that deal with CAD education and the use of CAD in practice. Thus, you will read in this book papers that focus on all three aspects: research, education, and practice and in some cases the intersection of two or more of those areas. Thankfully, ACADIA, while concerned with CAD in education has maintained its receptivity to basic research papers as well as a willingness to publish innovative papers in the area of practice. As chair of the technical committee, I made sure that the call for papers and the final selection reflects this desire. We should continue to emphasize the need for presenting this diversity of work in our annual conferences and I am optimistic that the ACADIA community is in support of this notion.
series	ACADIA
email
more	www.acadia.org
last changed	2022/06/07 07:49

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	f498
authors	Kobayashi, Yoshihiro
year	2001
title	3D City Modeler with Fuzzy Multiple Layers Perceptron: Application of soft computing in computer aided architectural design systems
source	University of California, Los Angeles
summary	A computer aided design (CAD) system that can store the design knowledge of users is proposed. Specifically, a computer system for generating 3D city models from satellite images is formulated, implemented and tested. Techniques from neural networks, fuzzy systems, image processing, pattern recognition, and machine learning constitute the methodological foundation of the system. The flexibility and usability of system are evaluated.
keywords	Architectural Rendering; Computer Simulation
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	16dd
authors	Leclercq, Pierre P.
year	2001
title	Programming and Assisted Sketching. Graphic and Parametric Integration in Architectural Design
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 15-31
summary	In this paper, we present our latest research related to the concept of a sketchinterface. After describing our vision of computer assisted design and the conditions necessary for its effective implementation, an original data model is presented, which covers different levels of representation and is grounded in a database of implicit information. We then describe our software prototype, which exploits the potentials of the digital sketch, in order to demonstrate how our ideas are pertinent and the feasibility of three kinds of applications. In particular, we argue in favor of using an architectural software program in relation to the sketch within the same computer assisted environment at an early stage in the design process.
keywords	Design , Architectural Models, Implicit Knowledge Management, Sketch Interface
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	avocaad_2001_21
id	avocaad_2001_21
authors	Martijn Stellingwerff
year	2001
title	Visual Cues in the CYBER-REAL Complex
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Current Computer Aided Architectural Design deals with issues of complexity in creation and interpretation of the built environment, complexity of the computer systems and complexity of the representations of the design object. The term ‘CYBER-REAL Complex’ in this paper is defined as the whole (un)conscious state of the architectural design project in the heads of the design-group and as how it is maintained in CAAD systems. The ‘CYBER-REAL Complex’ contains the design, its context and all related information such as planning, product specifications and design ideas. An Intranet is an interesting means for storage and approach of such complex project-data. However the knowledge and data of the project participants remains in their heads and new methods have to be developed in order to get each participant to share his or her personal information about the project. Meetings and intense data retrieval by an Intranet can establish a useful ‘CYBER-REAL Complex’. Then, as a designer wants to approach and change the information in the ‘CYBER-REAL Complex’, a very good set of tools, methods and media has to be at hand. The complexity of all the information can be overwhelming and it can take much effort to re-understand and re-interpret the information before new decisions and design-steps can be made. Currently, the understanding of CAAD representations by the designer and the deliberate execution of operations on increasingly complex datasets through increasingly complex user interfaces takes too much time and effort. An enhanced way of representation in the ‘CYBER-REAL Complex’ could help the approach and understanding of the information. Therefore the visual language of information systems needs further research and development. This paper explores several limits of human perception and ways to adhere to the human way of visual thinking in order to find and add new visual cues in CAAD, VR interfaces and in the ‘CYBER-REAL Complex’ as a whole. Successively the perceptive aspects of complex information, the role of visual cues in complex information and several examples of visual cues in research tests are presented. The paper draws from knowledge of the Gestalt Theory, Perception Research and findings of a PhD research project about Visual Language for Context Related Architectural Design. Findings of this research show that designers use distinct views to get overview and insight in the project data and that different kinds of data representation are needed for different phases in the design process. Finally it showed that abstract represented and filtered information can be very useful for remaining focus in the otherwise overwhelming dataset.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	7134
id	7134
authors	Penttilä, Hannu (Ed.)
year	2001
title	Architectural Information Management [Conference Proceedings]
doi	https://doi.org/10.52842/conf.ecaade.2001
source	19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1 / Helsinki (Finland) 29-31 August 2001, 578 p.
summary	Several common phrases, such as “information society” or “virtual reality” point out the fact that information technology, digital tools and numerous different services via various communication networks have become crucially important factors of our western lifestyle and living environment. The trends of the society reflects naturally the working environments of the construction field, architectural discipline being amongst them. It is almost inconceivable to even imagine an architect without computer-based tools anymore. This evolutional development process has, from historical perspective, only recently started. The process is constantly evolving and rapidly increasing our possibilities to use and enjoy these modern digital fruits. The sometimes unpredictable and rapid changes in our working environment should make architects nervous about the impacts of the changes. All those delicate methods and collective traditions of the several thousand year architectural discipline(!), just simply cannot be transferred into the digital realm in a few decades. Researchers and teachers should very carefully, but still open mindedly, critically explore, analyse and adjust the so-called “modern technology” into the world of architecture, construction, design, planning – and education. We are not just “endusers”, It is we, in fact, who should define what, where and how are we willing to use it(IT). The value of information is constantly growing in our society, and in the future it will evidently be even more so. The value of information is quite hard to define with measurable or agreed concepts, but information evidently contains value-factors. The information which the architects are creating, modifying and manipulating, contains essential and valuable core data concerning the whole built environment of our society. It affects the physical surroundings of our society, in which we will be living for decades – hence, the information has a historical basis. The architectural core information also very strongly affects the quality of life of our fellow citizens – consequently, it has deep social meaning. The essentials of architectural information relies on the tradition of centuries – hence, it clearly has acknowledged cultural values, which are also extremely difficult to quantify. So how could architectural information be described? The information covers a wide range of heterogeneous concepts, items, values, methods, tools, materials, true facts, rumours, intuition and knowledge, plus a multitude of yet undefined or unpredictable factors, which still have to be watched and prepared for. Since the information deals with common and general subjects, it should also be described with common and general concepts. On the other hand as the information is also concerned with the minutiae of specific projects, the architectural information should also be described with well identified and unique entities. With our digital tools we handle all information – including architectural – more and more digitally. We have to handle and manipulate information currently as digital data, which could be understood the ”raw material” of architectural information. Digital data becomes valuable information, when some kind of meaning or purpose to somebody can be attributed to it. In the early gloomy days of ”digital architecture” in the 1960’s and 1970’s, researchers tried to describe architectural artefacts and even design process mathematically. The details of architectural information were quite difficult to describe with binary alphanumeric information of main-frame machines. The architects’ tools development then led to a trend where architects could better represent and visualize the design objects digitally. The widespread and common use of 2D-drawing and 3D-modelling tools is still a very strong trend within our discipline. In fact it is “the way” the majority of architectural information is managed today. During the last 15–20 years, so-called conceptual modelling or product data modelling, done in various technical and construction field research units worldwide, has from one viewpoint clarified the basis and essence of architectural information. Hence, it’s not only CAD-software application development, but also elementary and theoretical research that gives us valuable help to survive among the ever growing seas of terabits of data in the future to come. Architectural information is something that simply cannot be described just with DWG-drawings or dummy scanned photographs any more. Although drawings and photos may contain very important bits of architectural documentation, we need ntimes more “complexity layers”, concepts and tools to manage and understand the essence of architectural information today. A proper way to manage the data we are working with, has to cover the whole architectural discipline. The methods and tools also have to be valid and flexible for several decades in the future.
keywords	Information Management & Data Structuring, Education & Curricula, Modeling & City Planning
series	eCAADe
email
more	http://www.hut.fi/events/ecaade/
last changed	2022/06/07 07:49

_id	2905
authors	Pereira, Gilberto Corso
year	2001
title	Urban Information Visualization - The Salvador project
doi	https://doi.org/10.52842/conf.ecaade.2001.517
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 517-521
summary	Before popularity of GIS a map is a tool with two basic functions - storage of spatial data and presentation of spatial information. Now, a digital database store spatial data and cartographic visualization is how spatial information usually is presented. Recent technological development applied to visualization area can increase analyse and interpretation capacity of professionals concern with urban planning, design and management. In other hand, many professionals and students involved with urban studies are not familiar with GIS software and this can limit casual users to access urban databases. One solution is to build software that allows direct visualization of spatial information based in users needs and knowledge. The project discussed in this paper introduces a computer application structured like a hypermedia atlas using concepts from cartographic modelling. The city of Salvador is represented by a model based in a combination of maps, and others images. User composes visualization.
keywords	Visualization, Hypermedia, GIS, Urban Information, Digital Atlas
series	eCAADe
email
last changed	2022/06/07 08:00

_id	4dd3
authors	Reymen, Isabelle M.M.J.
year	2001
title	Improving design processes through structured reflection : a domain-independent approach
source	Eindhoven University of Technology
summary	In the world of designing, three fields of attention can be recognised, namely design research, design practice, and design education. Gaps exist between these three fields. In this thesis about designing, the focus is on the gap between design research and design practice. Design practice includes many design disciplines and an increasing number of multidisciplinary teams. Main problems in design practice are the communication between designers with a different background and the integration and co-ordination of important aspects during a design process. By tackling these problems, the effectiveness and efficiency of design processes in practice can be improved. The study of similarities and differences between design processes in several design disciplines and the development of support for reflection on design processes are topics that can improve design practice and that deserve more attention in design research. The goal of my research is to decrease the gap between design research and design practice in order to improve design processes. Reflection on design processes can help designers to improve their design process, its results, and the designer’s proficiency: By reflecting explicitly on the current design situation and on the performed design activities, in a systematic way and on a regular basis, designers can plan next design activities that can be performed effectively and efficiently given the design goal at that moment. In this thesis, the combination of systematic and regular reflection is called structured reflection. To improve design processes in various design disciplines in practice, the study of similarities and differences between design processes in several disciplines can be useful. Similarities between design processes are the basis for domain-independent design knowledge (as distinguished from domain-specific design knowledge). To reach the goal of my research, I have chosen to combine, in a broad explorative study, the development of support for structured reflection on design processes and the development of domain-independent design knowledge. This thesis describes a domain-independent approach to improve design processes through structured reflection. My research process can be summarised as follows. I studied three design disciplines, namely architecture, mechanical engineering, and software engineering. To get input from design practice, I did qualitative empirical research: I performed twelve case studies in the three disciplines to inventory characteristics of design processes and I compared the cases for similarities and differences. The similarities, together with the results of a literature study, have been the basis for the development of domain-independent descriptive design knowledge. The developed descriptive knowledge, in turn, formed the basis for developing domain-independent prescriptive design knowledge. At the end of the project, I confronted all results with design practice to get feedback on the results in another empirical study and I performed a literature study to position the results in the design literature. My design philosophy and design frame are the descriptive results developed to answer the first research question, namely “How to describe design processes in a domain-independent way?”. My design philosophy is a set of domain-independent concepts and terms for describing a design process. The concepts and terms are based on an application of the general theory of state-transition systems to the context of designing; the concepts of state and state transition correspond to the main concepts of design situation and design activity in my design philosophy. The answer to the first research question given by the design philosophy is refined in a design frame: The design frame offers a means to structure the description of a design process in a domain-independent way. Major structuring concepts of the design frame are dimensions and subjects. I define three dimensions, namely level, perspective, and time. These dimensions define a three-dimensional space, called a positioning space, in which important aspects of design processes can be positioned. A positioning space must be defined for each subject, being the three parts of a design situation: the product being designed, the design process, and the design context. My design frame is a domain-independent structure formed by the combination of the three dimensions for each subject. My design method is the prescriptive result developed to answer the second research question, namely “How to support structured reflection on design processes in a domain-independent way?”. My design method is a domain-independent aid that offers designers support for reflecting on design processes in a structured way. Reflection on design processes is defined as an introspective contemplation on the designer’s perception of the design situation and on the remembered design activities. A reflection process is described as a process that consists of three steps that are called preparation, image forming, and conclusion drawing. The design method is based on two main concepts: The first concept is the systematic description and analysis of design situations and design activities by means of forms and checklists; only systematic support for the preparation step of a reflection process is developed. The second concept is the idea of design sessions, introduced to stimulate designers to reflect regularly during a design process. A design session is defined as a period of time during which one or more designers are working on a subtask of a certain design task, for example, one afternoon, a whole day, or a week. Both concepts are combined to support structured reflection on design processes. The complete design method consists of five steps for each design session, namely planning a design session, defining the subtask of the design session, reflecting at the beginning of a design session, designing during the core of a design session, and reflecting at the end of a design session. A prototype software tool, called ECHO, has been developed to explore the benefits of using a software system to facilitate the use of the design method. Together, the design philosophy and the design frame offer concepts, a vocabulary, and a structure to describe design processes in a domain-independent way. The design method is a first proposal of a method that supports structured reflection on design processes. My results are thus possible answers to the mentioned research questions and are starting points to improve the effectiveness and efficiency of design processes. Based on the feedback I collected, I am optimistic about the applicability of my results in design practice. By asking input from design practice and by developing results that are useful for design practice and that contribute to design research, I contribute to decrease the gap between design research and design practice. The most important recommendations for further research are to test all results extensively in design practice and to investigate how to apply the results in design education.
series	thesis:PhD
email
last changed	2003/02/12 22:37

For more results click below: