Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 277

Reformat results as: short short into frame detailed detailed into frame

_id	9a44
authors	Kolarevic, Branko
year	2001
title	MANUFACTURING DIGITAL ARCHITECTURES (Manufacturing Digital Architecture)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 278-281
summary	This paper addresses recent digital technological advances in design and fabrication and the unprecedented opportunities they created for architectural practices by allowing design, fabrication and construction of very complex forms that were until recently very difficult and expensive to design, produce, and assemble using traditional construction technologies. The paper also addresses the development of repetitive non-standardized building systems through digitally controlled variation and serial differentiation, i.e. mass-customization, in contrast to the industrial-age paradigms of prefabrication and mass production.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	22ec
authors	Bechthold, Martin
year	2001
title	Complex shapes in wood: Computer-aided design and manufacture of wood-sandwich roof shells
source	Harvard University
summary	Computer-Aided-Design, Engineering and Manufacturing (CAD/CAE/CAM) technology has changed the way consumer products, automobiles or airplanes are designed and made. The emerging applications for CAD/CAE/CAM technology in architecture, and the way this technology impacts how we design and construct the built environment, are yet unclear. This thesis investigates the relation between advanced digital design tools and the making of physical objects by focusing on an exemplary architectural element—wooden roof shells. The research objective is to expand the scope of architectural design through the application of CAD/CAE/CAM technology rather than to use this technology to streamline existing processes. The thesis develops a specific technical solution that allows the design and manufacture of new types of wooden roof shells. These are complexly shaped multifunctional construction elements that are manufactured off-site. Based on the close connection between digital design tools and the new Computer-Numerically-Controlled manufacturing process the author proposes a theoretical model of shared digital environments for collaborative design in architecture. The proposed manufacturing process treats wood as a modern composite material. Thin wood strips and foams combine into structural sandwich panels that can then be joined into a roof shell. The geometrically complex panels are generated by a combination of subtractive Computer-Numerically-Controlled machining processes and manual work. Infrastructure elements can be embedded into the sandwich build-up in order to enhance the functionality of the roof as a building envelope. Numerical tools are proposed that allow the determination of manufacturing-related parameters in the digital design environment. These inform the architectural and structural design in the early design phases. The digital collaborative design environment is based on a shared parametric solid model and an associated database. This collectively owned, feature-based design model is employed throughout the design and manufacturing process and constitutes the means of concurrent design coordination of all participants. The new manufacturing process for wood/foam sandwich shells is verified by designing and manufacturing prototypes. Design guidelines and a cost estimation are presented as the practical basis for architects and engineers to incorporate new types of roof shells into architectural projects.
keywords	Architecture; Agriculture; Wood Technology; Design and Decorative Arts
series	thesis:PhD
last changed	2003/02/12 22:37

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
doi	https://doi.org/10.52842/conf.caadria.2010.443
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	dbf3
authors	Curcio, Esteban and Perera, Gonzalo
year	2001
title	DEL MODELADO 3D AL PROTOTIPO INDUSTRIAL (From 3-D Modeling to the Industrial Prototype)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 77-79
summary	From 3D modeling to industrial prototype Industrial Design first year students (UNLP), led by designers Esteban Curcio and Gonzalo Perera, presented OGU coffee table in the avant-garde furniture category in Salao Design Movelsul (Brasil, 1998). Description: As an extracurricular activity, students had to deal with production variables related in particular to automated technologies and its effect on product design, completing each piece 3D digital modeling and following the whole process from manufacturing through diffusion and marketing. Technologies: Models for aluminum smelting: CAD / CAM / CNC; Glass: CNC cut with diamond milling cutter; 1020 steel: Computerized laser cut.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	24d2
authors	Da Costa Silva, Heitor
year	2001
title	MODELOS: FORMA E CONFORTO NA ARQUITETURA (Models: Form and Environment in Architecture)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 51-53
summary	The work presents a research project in its first phase of implementation. The research project deals with the manufacturing of architectural models which use new technology, for thermal and lighting investigation and using one heliodon as means of building assessment. The models to be produced will be chosen from built examples of the Modern Architecture of the XX Century. Initially virtual models will be constructed and afterwards the models will be printed in 3D. Once the three dimensional models were built they will be examined in one heliodon to evaluate their thermal and light performance. Also the models will be used as means of calibrating the heliodon itself. Lately the models will be incorporate as building examples for projects museum.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	caadria2003_b6-1
id	caadria2003_b6-1
authors	Howe, A.S., Kang, P. and Nasari, Omid
year	2003
title	Digiosk Digital Design to Robotic Deployment in Two Months
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 811-826
doi	https://doi.org/10.52842/conf.caadria.2003.811
summary	In this paper, we discuss Kit-of-parts Theory and how it applies to the design, manufacture, and operation of a small robotic deployable demonstration structure called the Digiosk (Howe, 2001). "Kit-of-parts Theory" refers to the study and application of objectoriented building techniques, where building components are predesigned / pre-engineered / pre-fabricated for inclusion in joint-based (linear element), panel-based (planar element), module-based (solid element), and deployable (time element) construction systems. The Digiosk is an exposition display kiosk that was designed and manufactured digitally, and brought from concept to robotic functionality in a short period of time. Using kinematic mechanisms the cylinder opens up and deploys into a 2.7m cubical display booth complete with integral power and network connections. The kiosk was designed using a solid modeler, from which data was extracted to drive digital manufacturing processes. Owing to the well-developed understanding of Kit-of-parts Theory and the new "kinematic architecture" principles, the paperless process yielded a working prototype only eight weeks after initial conceptualization. The paper concludes with a discussion of how these concepts can be applied to large-scale projects and design processes.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cfd8
authors	Kolarevic, Branko
year	2001
title	Digital Fabrication Manufacturing Architecture in the Information Age
source	ACADIA Quarterly, vol. 20, pp. 10-12
doi	https://doi.org/10.52842/conf.acadia.2001.010
summary	The basic premise of this graduate-level elective course, offered for the first time in the spring of 2001, is that the Information Age, like the Industrial Age before it, is challenging not only how we design buildings, but also how we manufacture and construct them. The guiding notion was that the generative and creative potential of digital media, together with manufacturing advances already attained in automotive, aerospace and shipbuilding industries, is opening up new dimensions in architectural design by allowing production and construction of very complex forms that were until recently very difficult and expensive to design, produce, and assemble using traditional construction technologies. The proposition was that the consequences of these changes are likely to be profound, as new digitally driven processes of design, fabrication and construction are increasingly challenging the historic relationship between architecture and its means of production.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	81b8
authors	Kolarevic, Branko
year	2001
title	Digital Fabrication: Manufacturing Architecture in the Information Age
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 268-278
doi	https://doi.org/10.52842/conf.acadia.2001.268
summary	This paper addresses the recent digital technological advances in design and fabrication and the unprecedented opportunities they created for architectural design and production practices. It investigates the implications of new digital design and fabrication processes enabled by the use of rapid prototyping (RP) and computer-aided manufacturing (CAM) technologies, which offer the production of small-scale models and full-scale building components directly from 3D digital models. It also addresses the development of repetitive non-standardized building systems through digitally controlled variation and serial differentiation, i.e. mass-customization, in contrast to the industrial-age paradigms of prefabrication and mass production. The paper also examines the implications of the recent developments in the architectural application of the latest digital design and fabrication technologies, which offer alternatives to the established understandings of architectural design and production processes and their material and economic constraints. Such critical examination should lead to a revised understanding of the historic relationship between architecture and its means of production.
keywords	Digital Fabrication, Computer-Aided Manufacturing, Digital Construction
series	ACADIA
email
last changed	2022/06/07 07:51

_id	3826
authors	Kolarevic, Branko
year	2001
title	Designing and Manufacturing Architecture in the Digital Age
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 117-123
doi	https://doi.org/10.52842/conf.ecaade.2001.117
summary	The paper describes and examines the implications of the recent developments in the architectural application of the latest digital design and fabrication technologies, which offer alternatives to the established understandings of architectural design and production processes and their material and economic constraints. It offers a possibility of a revised understanding of the historic relationship between architecture and its means of production.
keywords	Digital Design, Digital Fabrication, CAD/CAM
series	eCAADe
email
last changed	2022/06/07 07:51

_id	5bcd
authors	Rügemer, Jörg
year	2001
title	Computer Generated Architectural Design: 160 custom-made Architectural data flow from schematic design into Computer Aided Manufacturing
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 288-292
doi	https://doi.org/10.52842/conf.ecaade.2001.288
summary	The paper constitutes the introduction of a new approach into architectural design methods at the Institute for Architectural Design and CAD. It describes the experience with regard to the learning process and explains the design studio experiment ‘160 custom-made’. The design method has been developed from different actual building procedures. ‘160 custom-made’ provokes the contradiction between a modernistic architectural approach (industrialized parts and series manufacturing) and computer based design and manufacturing processes which promise the realization of almost every imaginable architectural shape at no extra cost. The students visited several Companies in Germany, Switzerland and Austria, who demonstrated state-of-the-art-technology-manufacturing methods on various materials. This Computer Aided Manufacturing (CAM) process then became the basis for discovering a new way to speculate about solutions to a design problem. The project was described into computer aided modeling starting early in the design. In the beginning participants were asked to design an object using terms, images and ideas, entirely detached from architectural thinking and without the knowledge of the actual architectural goal. ‘Maya’, a three-dimensional modeling software, was introduced at the same time, which allowed participants to translate the analog data of their models into a digital model description. In the last project phase this knowledge was used to visualize the models with the computer; a programmatic task was added to the design as the students proceeded with the further development stages of the project. The group searched for ways to translate the produced data structures and to drive the Computer Aided Manufacturing (CAM) process. The easy building of quick models with this technology proved to be more difficult than expected. ‘160 custom-made’ participants were confronted with an entirely new method of designing due to the unusual procedures needed to handle digital data information in order to receive the desired output.
keywords	Computer Aided Manufacturing, Rapid Prototyping, Design Education, Digital Design Development, Data Structures
series	eCAADe
email
last changed	2022/06/07 07:56

_id	diss_ddssar0211
id	diss_ddssar0211
authors	Brandt, Eva
year	2001
title	Event driven product development – collaboration and learning
source	Dept. of Technology and Social Sciences, Technical University of Denmark
summary	This dissertation is the result of the research project “Event-Driven Product Development: Collaboration and Learning”. It is an industrial Ph.D. project carried out in collaboration between the company Danfoss A/S, and the Institute of Technology and Social Sciences at the Technical University of Denmark; now the Department of Manufacturing Engineering and Management. The research was funded partly by Danfoss A/S and partly by the Danish Academy of Technical Sciences (ATV), who have named the project EF 609. The research project began in February 1996. I have had three supervisors: Thomas Binder and Jacob Buur both of whom represent Danfoss, and Lauge Baungaard Rasmussen from the Institute of Technology and Social Sciences at the Technical University of Denmark.
series	thesis:PhD
email
more	http://space.interactiveinstitute.se/staff/Eva.Brandt/phd.html
last changed	2003/12/15 14:31

_id	ga0107
id	ga0107
authors	Ceccato, Cristiano
year	2001
title	Integration: Master [Planner \| Programmer \| Builder]
source	International Conference on Generative Art
summary	The development of modern computer-based design systems and advanced manufacturing methods have progressed to the point where the promise of mass-customisation and the establishment of the ‘designer as integrator’ are being realised: the former implies that designers can now act as creators of systems which produce infinite possibilities, and the latterthat the convergence of designer and manufacturer, through common technologies, is enabling a reunification between design and construction processes. This paper discusses the symbiotic relationships of these paradigms within design research, practice and their commercialimplications, and the significance of the integration of new design tools and production methods for architects and designers.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	8ec5
authors	Kvan, Th., Gibson, I. and Ling, W.M.
year	2001
title	RAPID PROTOTYPING FOR ARCHITECTURAL MODELS
source	Euro RP 10th European Conference on Rapid Prototyping and Manufacturing, Paris, France, June 7-8, 2001, 9 p.
summary	Rapid prototyping (RP) technology has developed as a result of the requirements of manufacturing industry. There are a number of other application areas where RP has been used to good effect and one of these is architectural modelling. However; such application areas often have different requirements from what is offered by the current technology. This paper describes work carried out by the authors to investigate potential applications for architectural modelling; as well as an attempt to explore the limits of the technology. It will go on to discuss how the technology may be developed to better serve the requirements of architects.
keywords	Rapid Prototyping; Architectural Design; Learning
series	other
type	normal paper
email
last changed	2005/08/06 07:51

_id	4b5f
authors	Pang, King Wah
year	2001
title	A Process planning and Optimization System for Laminated Object Manufacturing Application
source	Hong Kong University of Schience and Technology (People’s Republic of China)
summary	Rapid Prototyping (RP) technologies have emerged as a powerful set of manufacturing technologies in recent years. While these technologies invariably provide tremendous time-savings over traditional methods of manufacture of design prototypes, many are still quite inefficient. This thesis examines two ideas; first, that these processes can be optimized greatly by using better process planning; second, that several of these RP technologies use similar core planning technologies for optimization. The first hypothesis is verified in this thesis by presenting an improved process planning system for one RP technology, Laminated Object Manufacturing (LOM). The framework proposes the use of computational geometry and optimization tools at two levels to reduce process time and material wastage. Geometric techniques are used for process planning at the 3D part level. A genetic algorithm (GA) based path optimization technique is used for path planning optimization at the layer level. The second observation led to the development of an open architecture planning system for a host of RP technologies. A test-bed software system is described in this thesis. Evaluation on the performance of the new methodology is also provided. The methodologies developed can work equally well with the current industry standard STL format for storing object CAD data as well as direct slice data computed from the exact solid model of a part.
keywords	Industrial Engineering; Mechanical Engineering
series	thesis:PhD
last changed	2003/02/12 22:37

_id	71e2
authors	Shelbourn, M., Aouad, G. and Hoxley, M.
year	2001
title	Multimedia in construction education: new dimensions
source	Automation in Construction 10 (2) (2001) pp. 265-274
summary	The use of multimedia for educational purposes has generated considerable discussion in recent years. This paper discusses a number of different ways in which multimedia can be used in the construction industry. Learning from other industries, particularly manufacturing is essential as multimedia has been explored and exploited by such industries. The first half of the paper demonstrates how multimedia can be used to aid learning and training in the construction sector and in disseminating research results to an industrial audience. The second part demonstrates how multimedia can be used as an interface to complex integrated database systems using virtual reality (VR) technologies. These can be used in a laboratory environment to train industrialists and students to use integrated systems, a topic of great importance and traditionally known to be difficult to understand. The work presented here builds upon research undertaken at the University of Salford in the UK through the use of case studies and findings generated from workshops attended by industrial collaborators who are interested in improving the ways in which information is delivered in the construction sector through multimedia capabilities.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	9ab2
authors	Yun, Yong Gib
year	2001
title	Structural Composite Members in Architecture Fabricated by CAD/CAE/CAM Technology
source	Harvard University
summary	The doctoral research in this dissertation is aimed at exploring new materials and innovative methods for fabricating complex-shaped buildings, which have surfaced as a prevailing trend in architecture today. Over the past few years, the field of architecture has witnessed revolutionary changes in design. The recent completion of Frank O. Gehry's new Guggenheim Museum in Bilbao, Spain, brought unprecedented attention to complex-shaped, non-conventional designs and its influence on the global architectural trend has been immense. In following these latest trends, the author was drawn to the issues concerning construction materials and methods that are being currently adopted in realizing these complicated designs. It is perhaps inevitable that the traditional steel construction methods, suitable for use in the conventional linear shapes, face tremendous challenges and limitations in building such complex-shaped designs. In the author's opinion, the next step to go from here is to seek joint efforts between the architectural field and the engineering field to search for a new methodology which will best serve the contemporary design style. This research first focused on examining the problems that traditional methods pose for the new complex-shaped buildings. Paying attention to Gehry's recent projects, the author was able to identify major difficulties in association with representing and constructing these complicated shapes, mainly in terms of the relationship between the primary structure and the envelope surface. The second part of the research moved on to proposing a new alternative to the traditional methods, by utilizing polymer composite materials (PCM) as construction material and employing advanced Computer-Aided Design (CAD)/Computer Aided Engineering (CAE)/Computer-Aided Manufacturing (CAM) technologies. More specifically, the author has attempted to present effective theories in support of the two following ideas: (1) circular tubes made of PCM are the most promising alternative to regular steel members, especially steel tubes, to follow the envelope surface of the complex shaped building. (2) state-of-the-art CAD/CAE/CAM technologies are the most essential tools to achieve the geometrical and functional quality of the proposed new material. In the second phase, the primary focus of the quantitative approach was on fabricating an experimental model (1:1 scale prototype) called “ a unit of boundary structures”, the basic unit of structure system that wraps a complex-shaped building's entire territory . (Abstract shortened by UMI.)
series	thesis:PhD
last changed	2003/02/12 22:37

_id	avocaad_2001_14
id	avocaad_2001_14
authors	Adam Jakimowicz
year	2001
title	Non-Linear Postrationalisation: Architectural Values Emergence in a Teamwork Interpretation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The paper presents the outcomes of the experiment being conducted at the Faculty of Architecture in Bialystok, which derives form three main sources: a new course of architectural composition by computer modelling, developed and conducted in Bialystok postrationalisation as a formulation platform for new architectural values and theories, applied by e.g. Bernard Tschumi the idea of new values emergence resulting form a teamwork, when placed in an appropriate environment; It is assumed that the work performed first intuitively, can be later seriously interpreted, and to some extent rationalised, verbalised, described. With no doubt we can state, that in creative parts of architectural activities, very often decision are taken intuitively (form design). So this ‘procedure’ of postrationalisation of intuitively undertaken efforts and results seems to be very important –when trying to explain ideas. This kind of activity is also very important during the first years of architectural education. In case of this experiment, the students’ works from the course of architectural composition are taken as a base and subjects for interpretation, and values research. However, when at first, individual works are being interpreted by their authors, at the latter stage, the teams are to be formed. The aim of the teamwork is to present individual works, analyse them, find common value(s), and represent it (them) in an appropriate, creative way. The ideal environment to perform this work is hypertext based internet, because the non-linearity of team interpretations is unavoidable. On the other hand, the digital input data (computer models) is a very appropriate initial material to be used for hypermedia development. The experiment is to analyse the specific of the following: the self-influence of the group on the individual work ‘qualification’, mutual influence of the team members on their own work interpretation, the influence of the digital non-linear environment on the final outcome definition. The added value of hypertext in architectural groupwork digital performance shall be examined and described. A new value of individualised, though group based, non-linearity of expression will be presented and concluded.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	c39a
authors	Ahumada Gallardo, N., López Morales, B., Mora Olate, M.L. and Muñoz, V.C.
year	2001
title	MARCO ANTONIO DE LA PARRA COMO NARRADOR Y ENSAYISTA. MONOGRAFIA MULTIMEDIAL (Marco Antonio de la Parra as Narrator and Writer. Monography in Multimedia)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 268-270
summary	The analysis of Marco Antonio de la Parra’s novels and essays from the discourse perspective, is the contents of an interdisciplinary work for modernizing and improving communicative possibilities of universitary thesis through multimedia. For the multimedia design, the main and most recent digital creating software for the graphic treatment of texts and images were analised, then the navigation system and screens were designed, difining backgrounds, texts, audio and video, besides buttons and hits. Results permit: 1. To present the contents in an easy access and transportation support, reducing production costs. 2. The offering of three communication supports: written text, audio and video. 3. Ostensibly improves universitary thesis and seminars quality.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	af65
authors	Akleman, E., Chen, J. and Sirinivasan, V.
year	2001
title	An Interactive Shape Modeling System for Robust Design of Functional 3D Shapes
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 248-257
doi	https://doi.org/10.52842/conf.acadia.2001.248
summary	In Architecture, it is essential to design functional and topologically complicated 3D shapes (i.e. shapes with many holes, columns and handles). In this paper, we present a robust and interactive system for the design of functional and topologically complicated 3D shapes. Users of our system can easily change topology (i.e. they can create and delete holes and handles, connect and disconnect surfaces). Our system also provide smoothing operations (subdivision schemes) to create smooth surfaces. Moreover, the system provides automatic texture mapping during topology and smoothing operations. We also present new design approaches with the new modeling system. The new design approaches include blending surfaces, construction of crusts and opening holes on these crusts.
keywords	Modeling, Shape Design, Sculpting, Computer Aided Geometric Design
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ascaad2004_paper12
id	ascaad2004_paper12
authors	Al-Qawasmi, Jamal
year	2004
title	Reflections on e-Design: The e-Studio Experience
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	The influence of digital media and information technology on architectural design education and practice is increasingly evident. The practice and learning of architecture is increasingly aided by and dependant on digital media. Digital technologies not only provide new production methods, but also expand our abilities to create, explore, manipulate and compose space. In contemporary design education, there is a continuous demand to deliver new skills in digital media and to rethink architectural design education in the light of the new developments in digital technology. During the academic years 2001-2003, I had the chance to lead the efforts to promote an effective use of digital media for design education at Department of Architecture, Jordan University of Science and Technology (JUST). Architectural curriculum at JUST dedicated much time for teaching computing skills. However, in this curriculum, digital media was taught in the form of "software use" education. In this context, digital media is perceived and used mainly as a presentation tool. Furthermore, Computer Aided Architectural Design and architectural design are taught in separate courses without interactions between the two.
series	ASCAAD
email
last changed	2007/04/08 19:47

For more results click below: