Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 702

Reformat results as: short short into frame detailed detailed into frame

_id	8948
authors	Bertola Duarte, Rovenir
year	2001
title	AS APROXIMAÇÕES DO COMPUTADOR AO PROCESSO DE ENSINO/ APRENDIZADO DO PROJETO ARQUITETÔNICO (An Approach to Computing in the Teaching/Learning Proces in Architectural Project Design)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 207-209
summary	This article seeks to disclose part of the results obtained with the development of the master dissertation. (DUARTE [2], 2000) The several approach forms between the computers and the process teaching/learning of architectural design were investigated in this work, standing out, close moment the edict of MEC that regulated the introduction of the computers in the architecture schools in Brazil. Ten Brazilian schools of architecture were researched, through questionnaires and visits, in which four approach forms were detected, that were understood more deeply with a study of cases, highlighting: methods, supports, components and the teaching process and the design process built by the student.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	avocaad_2001_10
id	avocaad_2001_10
authors	Bige Tunçer, Rudi Stouffs, Sevil Sariyildiz
year	2001
title	Facilitating the complexity of architectural analyses
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	It is common practice for architecture students to collect documents on prominent buildings relevant to their design task in the early stage of design. While practitioners can rely on a body of design experience of their own, during the process of a new design, students can only draw from the examples of success and failure from other architects. In the past, such precedent based learning was implicit in the master-apprentice relationship common in the educational system. Nowadays academics commonly no longer have the possibility to maintain an extensive design practice, and instead introduce important outside precedents to the students. Thus, the study of important historical precedents or designs plays an important role in design instruction and in the students’ design processes. While there is no doubt that the most effective outcome of such a study would be achieved when the student does entire the study herself, students also benefit from a collaboration with peers, where they form groups to do an analysis of various aspects of a same building or over a group of buildings. By integrating the respective results into a common, extensible, library, students can draw upon other results for comparisons and relationships between different aspects or buildings. The complexity this introduces is best supported in a computer medium.The Web offers many examples of architectural analyses on a wide variety of subjects. Commonly, these analyses consist of a collection of documents, categorized and hyperlinked to support navigation through the information space. More sophisticated examples rely on a database for storage and management of the data, and offer a more complex categorization of the information entities and their relationships. These studies present effective ways of accessing and browsing information, however, it is precluded within these analyses to distinguish and relate different components within the project documents. If enabled, instead, this would offer a richer information structure presenting new ways of accessing, viewing, and interpreting this information. Hereto, documents can be decomposed by content. This implies both expanding the document structure, replacing document entities by detailed substructures, and augmenting the structure’s relatedness with content information. The relationships between the resulting components make the documents inherently related by content.We propose a methodology to integrate project documents into a single model, and present an application for the presentation of architectural analyses in an educational setting. This approach provides the students with a simple interface and mechanisms for the presentation of an analysis of design precedents, and possibly their own designs. Since all the information is integrated within a single environment, students will benefit from each others’ studies, and can draw new conclusions across analyses and presentations from their peers.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ga0107
id	ga0107
authors	Ceccato, Cristiano
year	2001
title	Integration: Master [Planner \| Programmer \| Builder]
source	International Conference on Generative Art
summary	The development of modern computer-based design systems and advanced manufacturing methods have progressed to the point where the promise of mass-customisation and the establishment of the ‘designer as integrator’ are being realised: the former implies that designers can now act as creators of systems which produce infinite possibilities, and the latterthat the convergence of designer and manufacturer, through common technologies, is enabling a reunification between design and construction processes. This paper discusses the symbiotic relationships of these paradigms within design research, practice and their commercialimplications, and the significance of the integration of new design tools and production methods for architects and designers.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	048f
authors	Cheng, Ron K.C.
year	2001
title	Inside Rhinoceros
source	OnWord Press
summary	Master the ins and outs of building curved surfaces and organic shapes while sharpening your knowledge of the mathematics used in contemporary computer-aided engineering applications. Inside Rhinoceros provides readers with an all-inclusive introduction to 3D computer modeling using the newest release of Rhinoceros - Rhino™, Release 2 - with special emphasis on understanding NURBS surfaces and boundary-representation methods.
series	other
last changed	2003/02/26 18:58

_id	37e5
authors	Cruickshank, G., Paterson, I. and Natanson, L.
year	2001
title	A CREATIVE CURRICULUM: PUTTING TECHNOLOGY IN ITS PLACE
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 218-220
summary	The accessibility of 3D Modelling software presents challenges in the delivery of education aimed at developing creativity. Despite opening up innovative avenues of artistic possibility, computer technologies are essentially two-dimensional, hard to master and may restrict creativity itself. This paper describes a curriculum designed to develop creativity within an Electronic Arts programme. A student-centred, experiential learning approach was taken, which challenged students to set personal objectives within set project constraints. Formal critique sessions allowed students to develop a critical perspective. Conclusions are drawn as to the applicability of the approach to other non-artistic areas.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	ga0125
id	ga0125
authors	Galanter, Philip
year	2001
title	Foundations of Generative Art Systems - a hybrid survey and studio class for graduate students
source	International Conference on Generative Art
summary	The Interactive Telecommunications Program is a well known professional master's program for artists interested in new media, and is part of the Tisch School of the Arts...informally known as the "NYU Film School". ITP graduates are very much in demand, and can be found in creative leadership positions throughout the multimedia industry. For two years the author has taught a class exclusively focused on generative art. This talk willoutline the structure of the class, discuss the challenges and rewards of teaching such an eclectic and interdisciplinary mix of topics, and show examples of student work.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	caadria2006_613
id	caadria2006_613
authors	JAEHO RYU, NAOKI HASHIMOTO, MAKOTO SATO, MASASHI SOEDA, RYUZO OHNO
year	2006
title	A GAME ENGINE BASED ARCHITECTURAL SIMULATOR ON MULTI-PROJECTOR DISPLAYS
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 613-615
doi	https://doi.org/10.52842/conf.caadria.2006.x.m1v
summary	To make whole one image on screens that is generated by many computers and synchronization among computers, there is a need for a network software environment for multi-projector display system. Although the development costs increase for parallel programming for multi-projector display system, there is a possibility that the program cannot be executed at an enough speed since the network bandwidth might become a bottleneck. There are some software environments for that kind of multi-projector display system like Chromium that is latest version of WireGL (Humphreys, 2001&2002). WireGL is a kind of Client-Server Model, which one rendering server sends the data of rendering to many computers. While it can use the application without modification of source, it requires heavy network traffics. The other type of operating software is VR Juggler (Cruz-Neira, 2002), and CAVE Library that is a kind of Master-Slave Model. In the Master-Slave Model, every computer has same application programs to render the image that only keep the synchronization of rendering and events. But, these programs require a specialized skill and knowledge to modify the source of program for the certain rendering PC-Cluster system.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	4ce5
authors	Kalay, Yehuda E.
year	2001
title	Enhancing multi-disciplinary collaboration through semantically rich representation
source	Automation in Construction 10 (6) (2001) pp. 741-755
summary	The growing complexity of the built environment requires increased professional specialization to master each one of the many issues involved in designing buildings. This specialization is transforming the construction process into a highly de-centralized operation, involving an ever-growing number of collaborating professionals. Habitual modes of collaboration among the participating professionals suffer from low-grade communication, leading to misunderstanding and resulting in design and construction errors, cost and schedule overruns, and ultimately, dissatisfaction of the users with the performance of the finished products. This paper explores the roots of misunderstanding in multi-disciplinary design and presents a solution based on explicit representation of reference and frame-of-reference through three connected databases and a set of inference tools.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	604c
authors	Ruffle, Simon and Richens, Paul
year	2001
title	Web Based Consultation for Cambridge University’s Building Program
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 366-371
doi	https://doi.org/10.52842/conf.acadia.2001.366
summary	This two-year project is researching the web as a communications medium for better client-ship in the construction industry. The Martin Centre is developing a web site that presents Cambridge University’s £500 million ($700m) current building program to staff, students, alumni, and the citizens of Cambridge. Focussing on the University’s master plans for the Sidgwick and West Cambridge teaching campuses, the project is in collaboration with the University Estate Management and Building Service (EMBS), General Board, West Cambridge Project Office, Sidgwick Site User Representatives, and the Press Office. The web site explains the University’s development proposals in manner suited to readers with no building industry knowledge and offers an opportunity for consultative feedback. It is publicly available on the web at http:// www.cam.ac.uk/building.
keywords	Architecture, Urban Planning, Consultation Website, Masterplan
series	ACADIA
email
last changed	2022/06/07 07:56

_id	d0b3
authors	Tisken, S., Voormann, F., Franz, B., Koch, V. and Russell, P.
year	2001
title	Semi-Medial Post Professional Studies ”Building Conservation” for Architects and Structural Engineers
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 323-328
doi	https://doi.org/10.52842/conf.ecaade.2001.323
summary	The Post-Graduate studies for Building Restoration at the University of Karlsruhe is aimed at architects and construction engineers who wish to deepen their knowledge base as well as related professionals in the construction industry who wish to specialise. The goal of the project is to migrate the post graduate studies in restoration to a Master Degree program made up of physical and virtual presence requirements (dual mode university) and to transform the course materials into Learning Elements that can be used in other programs. The quality of the teaching should increase and reach a larger audience of interested parties at the same time. In particular, the program is aimed at current practitioners. A model is developed that incorporates classical presence based studies with modern internetbased learning methods to create a system, which does not completely replace presencebased learning: “semi-medial” studies.
keywords	Distance Learning, Collaboration, CSCW, Renovation
series	eCAADe
email
last changed	2022/06/07 07:58

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	448f
authors	De Vecchi, A., Colajanni, S., Corrao, R. and Marano, L.
year	2001
title	M.I.C.R.A. - A WBI System to Manage Information for the Recovery of Ancient Buildings
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 61-66
doi	https://doi.org/10.52842/conf.ecaade.2001.061
summary	In the field of Architecture and Building Construction is increasing the tendency to search information in the old construction handbooks to find more easily the best solutions to the recovery of ancient buildings: to make them easily accessible we are developing an “electronic handbook” by using the technologies related to Internet. The paper reports on M.I.C.R.A. (Manuale Informatizzato per la Codifica della Regola d’Arte), a WBI System able to allow different kind of users (from experts in the fields of Architecture and Building Construction to university students) to easily find the information stored in the old construction handbooks -edited since the 18th century and normally stored in different libraries around Europe- and to immediately compare them each other. The system information management and the data structuring are explained by describing the design strategies and the specific “research criteria” we have adopted to the development of the system.
keywords	Web Knowledge Repository, Didactic Strategies, Information Accessibility, Information Management, Data Structuring
series	eCAADe
last changed	2022/06/07 07:55

_id	7501
authors	Apley, Julie
year	2001
title	A Virtual Reconstruction: Isthmia Roman Bath
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 410-411
doi	https://doi.org/10.52842/conf.acadia.2001.410
summary	The Isthmia Roman Bath is located in Greece overlooking a great ravine on the Isthmus of Corinth. It was in use during the 2nd through the 4th centuries. I have created a 3D VRML walkthrough of the ancient bath. This interdisciplinary project utilizes the research of an archaeologist, architect, and art historian. Because the researchers live in different locations, it made sense to use the Internet as a research tool. When clicking on the numbers on the home page, you can see the process that I went through to model the Roman Bath. After seeing the images, the researchers were able to visualize their research, reply to questions, and re-evaluate their findings. VRML promises an accessible, highly visual, and interactive representation of difficult to see data, opening up new ways of presenting research. It is possible to walk within the bath by clicking on the Virtual Reconstruction link. When in the "Entrance view", click on the vase to see a map of the ruin. There are three places within the project that link to the existing excavated site. Links are also available to walk outside. The project runs best on Windows NT using Netscape. You must have the plug-ins for Cosmoplayer (VRML) and Quicktime (movie). Because the VRML plug-in doesn't work as well on a Mac, it is possible that you may only be able to view the images and movie from the project.
series	ACADIA
last changed	2022/06/07 07:55

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2014_153
id	ecaade2014_153
authors	David Morton
year	2014
title	Augmented Reality in architectural studio learning:How Augmented Reality can be used as an exploratory tool in the design learning journey
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 343-356
doi	https://doi.org/10.52842/conf.ecaade.2014.1.343
wos	WOS:000361384700034
summary	The boundaries of augmented reality in the academic field are now being explored at an ever increasing level. In this paper we present the initial findings of an educational project focusing on the use of augmented reality in the design process of an architectural student. The study seeks to evaluate the use of AR as a tool in the design stages, allowing effective exploration of spatial qualities of design projects undertaken in the studio. The learning process is guided by the exploration and detection of a design idea in both form and function, with the virtual environment providing a dynamic environment (Mantovani, 2001). This is further reflected in the constructivist theory where the learning processes use conceptual models, which are used to create incremental stages that become the platform to attain the next [Winn, 1993]. The additional benefit of augmented reality within the learning journey is the ability of the students to visually explore the architectural forms they are creating in greater depth.
keywords	Augmented reality; pedagogy; learning journey; exploration
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	1229
authors	Donath, D., Beetz, N., Grether, K., Kruijff, E., Petzold, F. and Seichter, H.
year	2001
title	Cooling Factory, a concrete project to test new architectural applications for augmented reality
source	Venetia Giagourta, Michael G. Strintzis (ed.): International Conference on Augmented, Virtual Environments and Three-Dimensional Imaging, Verlag Myconos, pp. 14-17
summary	This paper will discuss possible fields of applications of AR/VR for revitalization of buildings from a user's perspective. Considerations are based on the real-world project "Cooling factory Gera". The project is founded by "Deutsche Forschungsgesellschaft (DFG)".
series	other
email
last changed	2003/02/26 18:58

_id	c78f
authors	Fischer, T. and Herr, C.M.
year	2001
title	Teaching Generative Design
source	Soddu, C., ed. (2001). The Proceedings of the Fourth International Conference on Generative Art 2001. Milan, Italy: Generative Design Lab, DiAP, Politechnico di Milano University
summary	Generative design, which integrates multidisciplinary types of expertise in unconventional ways, was reserved just until recently to experienced and highly autodidactic designers. However, growing recognition of the importance of generative design methodologies have resulted in a need to introduce theories and applications of generative design to undergraduate students as part of their design studies. This emerging educational field of generative design teaching currently lacks methodologies, teaching experience and introductory study material. Available textbooks related to algorithmic form generation, discussing algorithmic growth, artificial life, fi-actal images, emergent behaviour and the like have originated in the field of mathematics. This resource provides an abundance of examples and generative approaches but when adapted to design education, it poses great interdisciplinary challenges which are addressed in this paper. Experiences in generative design teaching are presented, focusing on the relation between algorithmic reproduction of nature (as emphasized by authors in the mathematical field) and innovation (as commonly emphasized in design education). This discussion leads to a derivation of pedagogic suggestions as early steps on the way towards theories and curricula of generative design teaching, addressed to curriculum planners, generative design teachers as well as novices of the field such as undergraduate students.
series	other
last changed	2003/04/23 15:50

_id	afe6
authors	Funkhouser, Thomas
year	2001
title	Modeling acoustics in virtual environments using the uniform theory of diffraction
source	Siggraph 2001
summary	Realistic modeling of reverberant sound in 3D virtual worlds provides users with important cues for localizing sound sources and understanding spatial properties of the environment. Unfortunately, current geometric acoustic modeling systems do not accurately simulate reverberant sound. Instead, they model only direct transmission and specular reflection, while diffraction is either ignored or modeled through statistical approximation. However, diffraction is important for correct interpretation of acoustic environments, especially when the direct path between sound source and receiver is occluded. The Uniform Theory of Diffraction (UTD) extends geometrical acoustics with diffraction phenomena: illuminated edges become secondary sources of diffracted rays that in turn may propagate through the environment. In this paper, we propose an efficient way for computing the acoustical effect of diffraction paths using the UTD for deriving secondary diffracted rays and associated diffraction coefficients. Our main contributions are: 1) a beam tracing method for enumerating sequences of diffracting edges efficiently and without aliasing in densely occluded polyhedral environments; 2) a practical approximation to the simulated sound field in which diffraction is considered only in shadow regions; and 3) a real-time auralization system demonstrating that diffraction dramatically improves the quality of spatialized sound in virtual environments.
series	other
last changed	2003/04/23 15:50

_id	37b4
authors	Gu, N. and Maher, M.L.
year	2001
title	Architectural design of a virtual campus
source	Y-T. Liu (ed.), Defining Digital Architecture, Dialogue, pp. 158-161
summary	The design of a virtual campus, while considering the role of technology in education, also can be influenced by the of place that more traditional architectural design provides. This approach need not result in a virtual campus that looks like a physical building, the main concept is to intricately link learning with an experience in a place with other people.
series	other
last changed	2003/04/23 15:50

For more results click below: