Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 17 of 17

Reformat results as: short short into frame detailed detailed into frame

_id	5b94
authors	Jefferis, A., Jones, M. and Jefferis, T.
year	2001
title	AutoCAD 2002 for Architecture
source	Autodesk Press
summary	Fully updated to power readers to new levels of productivity, AutoCAD(r) 2002 for Architecture is a concise guide to mastering the commands used to create 2D drawings, step-by-step. All examples and exercises are architecture-specific, enabling readers to focus squarely on developing the specific computer skills and drafting expertise required to excel in the architectural and construction fields today.
series	other
last changed	2003/02/26 18:58

_id	cd47
authors	Park, Hyeonsoo
year	2001
title	Distributed Representation of an Architectural Model
source	Harvard University
summary	This thesis proposes a new strategy for design representation that uses dynamically decentralized design objects, distributed over the web and instantiated just-in-time, instead of the traditional centralized, static and local CAD model. It addresses the problem of coping with dynamic information changes that architects face when designing with increasingly time-sensitive product information from multiple suppliers. The dissertation describes the new distributed architecture for design representation, and outlines a corresponding new process model to address the needs of AEC (Architectural, Engineering and Construction) industries' architectural designers during design and procurement phases. The feasibility of the process was tested in a prototype system that combines existing state-of-the-art technologies. The prototype integrates the direct manipulation functionality of Autodesk's i-Drop technology with the Internet communication protocols HTTP and TCP/IP, and a VBA macro running from within AutoCAD 2000i. In the proposed model, libraries of AEC objects, representing suppliers' products, are located in multiple suppliers' databases and are made available to CAD designers remotely over the Web. Suppliers using the system are expected to produce product information as XML documents. This standardizes the interface with the remote designers.
keywords	Architecture; Design and Decorative Arts; Agriculture; Wood Technology
series	thesis:PhD
last changed	2003/02/12 22:37

_id	ea46
authors	Colajanni B., Concialdi, S. and Pellitteri, G.
year	2001
title	Construction or Deconstruction: Which is the Best Way to Learn Architecture?
doi	https://doi.org/10.52842/conf.ecaade.2001.299
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 299-304
summary	The actual shift of the teaching methods from teacher-centred expository methods, to learner-centred exploratory ones. The educational goals are no more the construction of a solid theory knowledge from which the behaviour is driven. It is the acquisition of capabilities and skills directly related to the professional activity. The consequence is that the teacher has the task of endowing the student not only with a large amount of documentation but also with at least suggestions of the way to use it. One of these suggestions is the deconstruction (in a literal and not philosophical sense) as a way of investigating the structure of buildings. In a first phase in order to acquire, through generalisation a systematic knowledge of the way the parts of a building (their subsystems) contribute to the global architectural organism. In a second phase in order to explore buildings of special interest aiming at mastering their peculiar solutions. An example of this method is presented, limited to the spatial analysis only both for brevity sake and for particular difficulties presented.
keywords	Deconstruction, Learn Architecture, Learning By Experience
series	eCAADe
email
last changed	2022/06/07 07:56

_id	e7a9
authors	Cong, Wu and Hongran, Zhang
year	2001
title	CAD system for chinese traditional architecture
doi	https://doi.org/10.52842/conf.caadria.2001.331
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 331-335
summary	This paper discusses an undergoing project for an AutoCAD based CAD system for Chinese traditional architecture (CTA) called ARCHISTORY. It covers three main aspects of CTA research: field survey, structural and constructional research, and preservation and restoration design.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ec4d
authors	Croser, J.
year	2001
title	GDL Object
source	The Architect’s Journal, 14 June 2001, pp. 49-50
summary	It is all too common for technology companies to seek a new route to solving the same problem but for the most part the solutions address the effect and not the cause. The good old-fashioned pencil is the perfect example where inventors have sought to design-out the effect of the inherent brittleness of lead. Traditionally different methods of sharpening were suggested and more recently the propelling pencil has reigned king, the lead being supported by the dispensing sleeve thus reducing the likelihood of breakage. Developers convinced by the Single Building Model approach to design development have each embarked on a difficult journey to create an easy to use feature packed application. Unfortunately it seems that the two are not mutually compatible if we are to believe what we see emanating from Technology giants Autodesk in the guise of Architectural Desktop 3. The effect of their development is a feature rich environment but the cost and in this case the cause is a tool which is far from easy to use. However, this is only a small part of a much bigger problem, Interoperability. You see when one designer develops a model with one tool the information is typically locked in that environment. Of course the geometry can be distributed and shared amongst the team for use with their tools but the properties, or as often misquoted, the intelligence is lost along the way. The effect is the technological version of rubble; the cause is the low quality of data-translation available to us. Fortunately there is one company, which is making rapid advancements on the whole issue of collaboration, and data sharing. An old timer (Graphisoft - famous for ArchiCAD) has just donned a smart new suit, set up a new company called GDL Technology and stepped into the ring to do battle, with a difference. The difference is that GDL Technology does not rely on conquering the competition, quite the opposite in fact their success relies upon the continued success of all the major CAD platforms including AutoCAD, MicroStation and ArchiCAD (of course). GDL Technology have created a standard data format for manufacturers called GDL Objects. Product manufacturers such as Velux are now able to develop product libraries using GDL Objects, which can then be placed in a CAD model, or drawing using almost any CAD tool. The product libraries can be stored on the web or on CD giving easy download access to any building industry professional. These objects are created using scripts which makes them tiny for downloading from the web. Each object contains 3 important types of information: · Parametric scale dependant 2d plan symbols · Full 3d geometric data · Manufacturers information such as material, colour and price Whilst manufacturers are racing to GDL Technologies door to sign up, developers and clients are quick to see the benefit too. Porsche are using GDL Objects to manage their brand identity as they build over 300 new showrooms worldwide. Having defined the building style and interior Porsche, in conjunction with the product suppliers, have produced a CD-ROM with all of the selected building components such as cladding, doors, furniture, and finishes. Designing and detailing the various schemes will therefore be as straightforward as using Lego. To ease the process of accessing, sizing and placing the product libraries GDL Technology have developed a product called GDL Object Explorer, a free-standing application which can be placed on the CD with the product libraries. Furthermore, whilst the Object Explorer gives access to the GDL Objects it also enables the user to save the object in one of many file formats including DWG, DGN, DXF, 3DS and even the IAI's IFC. However, if you are an AutoCAD user there is another tool, which has been designed especially for you, it is called the Object Adapter and it works inside of AutoCAD 14 and 2000. The Object Adapter will dynamically convert all GDL Objects to AutoCAD Blocks during placement, which means that they can be controlled with standard AutoCAD commands. Furthermore, each object can be linked to an online document from the manufacturer web site, which is ideal for more extensive product information. Other tools, which have been developed to make the most of the objects, are the Web Plug-in and SalesCAD. The Plug-in enables objects to be dynamically modified and displayed on web pages and Sales CAD is an easy to learn and use design tool for sales teams to explore, develop and cost designs on a Notebook PC whilst sitting in the architects office. All sales quotations are directly extracted from the model and presented in HTML format as a mixture of product images, product descriptions and tables identifying quantities and costs. With full lifecycle information stored in each GDL Object it is no surprise that GDL Technology see their objects as the future for building design. Indeed they are not alone, the IAI have already said that they are going to explore the possibility of associating GDL Objects with their own data sharing format the IFC. So down to the dirty stuff, money and how much it costs? Well, at the risk of sounding like a market trader in Petticoat Lane, "To you guv? Nuffin". That's right as a user of this technology it will cost you nothing! Not a penny, it is gratis, free. The product manufacturer pays for the license to host their libraries on the web or on CD and even then their costs are small costing from as little as 50p for each CD filled with objects. GDL Technology has come up trumps with their GDL Objects. They have developed a new way to solve old problems. If CAD were a pencil then GDL Objects would be ballistic lead, which would never break or loose its point. A much better alternative to the strategy used by many of their competitors who seek to avoid breaking the pencil by persuading the artist not to press down so hard. If you are still reading and you have not already dropped the magazine and run off to find out if your favorite product supplier has already signed up then I suggest you check out the following web sites www.gdlcentral.com and www.gdltechnology.com. If you do not see them there, pick up the phone and ask them why.
series	journal paper
email
last changed	2003/04/23 15:14

_id	f9d8
authors	De Valpine, John and Black, Benjamin
year	2001
title	Physically Based Daylight Simulation and Visualization
doi	https://doi.org/10.52842/conf.acadia.2001.406
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 406-407
summary	While architects typically agree that daylight is a powerful influence for design, architects rarely collect and use daylighting data to help make informed design decisions. This deficiency exists partially because there are no common tools available to provide useful and accessible data. The objective of this project is to provide accurate daylighting data of a prominent urban building site and present it in a clear way so that the architects can make well informed design decisions that respond to site daylighting conditions and improve architectural performance. An urban 3D computer model was created with AutoCad, a commercial CAD application. Daylight was simulated with Radiance, the physically based rendering engine developed at Lawrence Berkeley National Laboratory. The standard CIE model for clear sky and sun was used to produce over 500 images that represent daylight conditions for three different times of year at 10 minute intervals in both luminance and illuminance formats. The simulation data was packaged for analysis with a unique browser tool that enables the architect to easily cycle through the data to evaluate and compare behavior by time of day and by season. The architect can also toggle between luminance and illuminance format to easily visualize both qualitative and quantitative data. The exploration and use of the simulation data can be applied with sensitivity to inform the design and decision making process for the exterior building site.
series	ACADIA
last changed	2022/06/07 07:55

_id	9bee
authors	Gerzso, J. Michael
year	2001
title	Automatic Generation of Layouts of an Utzon Housing System via the Internet
doi	https://doi.org/10.52842/conf.acadia.2001.202
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 202-211
summary	The article describes how architectural layouts can be automatically generated over the Internet. Instead of using a standard web server sending out HTML pages to browser client, the system described here uses an approach that has become common since 1998, known as three tier client/server applications. The server part of the system contains a layout generator using SPR(s), which stands for “Spatial Production Rule System, String Version”, a standard context- free string grammar. Each sentences of this language represents one valid Utzon house layout. Despite the fact that the system represents rules for laying out Utzon houses grammatically, there are important differences between SPR(s) and shape grammars. The layout generator communicates with Autocad clients by means of an application server, which is analogous to a web server. The point of this project is to demonstrate the idea that many hundreds or thousands of clients can request the generation of all of the Utzon layouts simultaneously over the Internet by the SPR(s) server, but the server never has to keep track when each client requested the generation of all of the layouts, or how many layouts each client has received.
keywords	Internet, Spatial-Production-Rules Grammars, Utzon
series	ACADIA
email
last changed	2022/06/07 07:51

_id	5d19
authors	Gómez Arvelo, Susana Carolina
year	2001
title	Simulador de proyecciones de sombras sobre modelos computarizados en 3d. Herramienta para evaluar la eficiencia de modelos de proteccion solar. [Shade simulator On 3D Computer Models. A Tool to Evaluate the Efficiency of Models for Solar Protection]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 156-165
summary	A Program of Graphic Computing, developed in the Language of Programming AUTOLISP and run in AUTOCAD 2000, which is guided toward the Investigation in Bioclimatic Architecture, is presented. Before a model of solar protection in 3D, and loading the input data of the geographical localization and orientation, time and evaluation date (chosen by the user), the program calculates and projects the simulation of the corresponding shade contours on every plane that constitutes the 3D pattern (openings, walls, protections, floor...). In this research different areas of knowledge concur: Plane and spherical trigonometry applied to the solar ray and to the Bioclimatic Architecture, space geometry, plane graphical representation of three-dimensional objects, a concept of the transformation of vision for the three-dimensional representation of the objects in computers, and modern programming techniques.
keywords	Bioclimatic Architecture; Heat Gaining Control; 3D Shades Simulator; Solar Protection
series	other
email
last changed	2003/02/14 08:29

_id	sigradi2009_903
id	sigradi2009_903
authors	Harris, Ana Lúcia Nogueira de Camargo
year	2009
title	O Uso da Técnica dos "Planos em Série" com o Desenvolvimento da Computação Gráfica - Uma Experência Didática [The Use of the 'Serial Plan' Technique with the Development of the Computer Graphic - A Teaching Experience]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper is about comparative didactic experiences where the “Serial plan Technique” defined by Wong (1998), was applied in 2001 and 2008 which computer resources from that time. In 2001 this technique was applied with the help of AutoCAD for generation of the planifications, but in 2008 the appliances of AutoCAd and Sketch Up were used for the virtual construction of objects. The quality of the results showed a didactic potential and an increasement in the possible creative rhythm, mainly because the facility of the three-dimensional virtual visualization and because the speed in the physical execution of the created project.
keywords	didactic experiences; serial plan technique; CAD; AutoCAD; Skecht Up
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	d146
authors	He, Jie
year	2001
title	CAD Study in Visual Analysis of the Visual Sustainability for China Urban Natural Landscape Planning
source	Chinese University of Hong Kong
summary	In this thesis a GIS-based CAD system prototype of evaluating visual quality of urban natural landscape environment is presented. This prototype is an indispensable component of the integrative Visual Sustainability research, and offers a calculable and visualizable technique to urban visual natural landscape assessment. This scientific method provides precise data to estimate the visibility of natural landscape in urban construction actuality. Furthermore, it can also work out supporting information for maintaining and protecting valuable visual landscape resources in further planning. Introduction of this methodology intends to improve the natural landscape cooperation in China urban planning through visual protection. Combining with popular CAD software such as AutoCAD and Microstation, the research team uses ArcView GIS software and its 3D Analyst extension to accomplish a set of research procedure, which includes data modification, model making, viewshed and view sensibility analysis. In addition, this system can create simultaneous 3D scenes or hire other information media as reference tools for professional analysis, design consultation and intercommunication. The core technologies of this proposed system are viewshed calculation and overlay analysis. In viewshed analysis, human visual characteristics are simulated by a series of ergonomics parameters of viewpoints. Viewshed of each viewpoint can be calculated into vector data and mapped by polygons identifying which region is visible and which is not. Overlay function of the proposed system is used in visual sensibility analysis to achieve the division of higher visual sensible area which indicates the common visible area from different viewpoints. Additionally, viewshed maps and visual sensibility results can add more information to mark out the areas that can satisfy certain visual parameters such as appropriate visual angle or visual distance. These overlaying results can visualized the visible areas into hierarchical visual perception quality categories in order to define the visual landscape significance of particular planning regions. A case study was operated to evaluate this system. The case is in Zhongshan city, Guangdong Province of China. Jinzishan hill region is the study site that picked by collaborating discussion of research team and the local government. It is located on the edge of urban built-up area. Jinzishan massif is the prominent landscape element of the surrounding environment. There are three topics in Jinzishan visual perception in this paper. The first topic is the visual quality evaluation of the intersections of its surrounding road system. The second is the integrated visual perception of two main roads called Qiwandao and Bo‚Äôailu. Finally is the analysis of the hill skyline visual quality in surrounding area. The analysis results in GIS vector data can be converted into popular data format and combined with other spatial information for practical application. And comments for future urban planning are collected and analyzed by professional responses to the computer-generated information investigation.
keywords	Natural Landscaping; Computer-Aided Design; Landscape Architecture; City Planning; Geographic Information Systems
series	thesis:MSc
email
last changed	2003/02/12 22:37

_id	6795
id	6795
authors	KOUZELEAS Stelios
year	2005
title	DEFINITION OF A METHOD OF LIMITS OF THE SIMPLIFICATION OF A HALL MODEL IN A CAD SYSTEM TO DIMINISH FALSIFICATION OF ACOUSTIC SIMULATION RESULTS
source	International Congress eCAADe 2005 (Education and research in Computer Aided Architectural Design in Europe), subject : “Digital Desing : the quest for new paradigms”, ISBN 0-9541183-2-4, pp. 695-704, Technical University of Lisbon, Portugal, 21-24 September 2005
summary	During the modelling, because of the sometimes complex architectural shape of halls, we were forced to introduce simplifications in order to carry out calculations and simulation operations on these halls, as the calculation software requires plane surfaces. This paper presents a developed tool adapted on a CAD modelling system (AutoCAD), which defines an “average limits” of the model simplification operation in order to control and diminish the falsification of calculation and simulation results on this model, such as the architectural acoustic simulation. The process of the elaboration and the adjustment of the simplified models of the Grand Theatre of Bordeaux (GTB) based on acoustical measurements and their calculation results are described in detail in a previous article (Kouzeleas and Semidor, 2001). The analysis process of the consequences of the hall model simplification on the acoustical simulation results and the applied simplification methods are described in a PhD thesis (Kouzeleas, 2002). This article is based on this analysis process in order to apply it on several simplified models of the Amphitheatre of the Architecture School of Bordeaux (Amphi-EAPB). The comparison in a CAD system (AutoCAD) of the acoustical calculation results and the areas after simplification of the simplified models of these two halls made with AutoCAD, via the developed tool adapted on the AutoCAD, permit to define a “limits average of a hall model simplification” before the falsification of these calculation results.
series	other
type	normal paper
email
more	http://www.civil.ist.utl.pt/ecaade05/
last changed	2005/10/25 12:19

_id	2005_695
id	2005_695
authors	Kouzeleas, Stelios Th.
year	2005
title	Definition of a Method of Limits of the Simplification of a Hall Model in a CAD System to Diminish Falsification of Acoustic Simulation Results
doi	https://doi.org/10.52842/conf.ecaade.2005.695
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 695-704
summary	During the modelling, because of the sometimes complex architectural shape of halls, we were forced to introduce simplifications in order to carry out calculations and simulation operations on these halls, as the calculation software requires plane surfaces. This paper presents a developed tool adapted on a CAD modelling system (AutoCAD), which defines an “average limits” of the model simplification operation in order to control and diminish the falsification of calculation and simulation results on this model, such as the architectural acoustic simulation. The process of the elaboration and the adjustment of the simplified models of the Grand Theatre of Bordeaux (GTB) based on acoustical measurements and their calculation results are described in detail in a previous article (Kouzeleas and Semidor, 2001). The analysis process of the consequences of the hall model simplification on the acoustical simulation results and the applied simplification methods are described in a PhD thesis (Kouzeleas, 2002). This article is based on this analysis process in order to apply it on several simplified models of the Amphitheatre of the Architecture School of Bordeaux (Amphi- EAPB). The comparison in a CAD system (AutoCAD) of the acoustical calculation results and the areas after simplification of the simplified models of these two halls made with AutoCAD, via the developed tool adapted on the AutoCAD, permit to define a “limits average of a hall model simplification” before the falsification of these calculation results.
keywords	Calculation Cad Program Integrated Development ; Design Process ; 3D Modeling ; Performance Simulation ; Acoustic Simulation Results
series	eCAADe
email
last changed	2022/06/07 07:52

_id	05bb
authors	Marina González de Kauffman, Ede Martinez de Adrianza, Carlos González Hernández
year	2001
title	Aplicacion de la programacion en cad para la modelizacion de trazados urbanos [Application of CAD-Programming for the Modeling of Urban Layouts]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 228-236
summary	To generate models of branched and reticular urban layouts, under three different forms of growth (linear, radial, strips), a program designed on AutoLISP Æ for the AutoCAD Æ V-2000 has been proposed. The generated models are both graphical as well as mathematical, and for each case are produced, considering the two variables assumed as inputs: the number of houses and the number of grouping units. The mathematical data is automatically saved in a MSExcel Æ spreadsheet created through a direct connection established from the AutoCAD Æ V-2000.
series	other
email
last changed	2003/02/14 08:29

_id	ba73
authors	Oliván, Alfredo Serreta and Sebastián, Ricardo Aliod
year	2001
title	GESTARCAD, UNA APLICACIÓN PARA EL DISEÑO Y SIMULACIÓN DE REDES DE FLUIDOS, PROGRAMADA BAJO EL ENTORNO AUTOCAD UTILIZANDO OBJETOS ACTIVE X EN VB 6.0 (GESTARCAD, An Application for the Design and Simulation of Networks of Fluids, Programmed in the Autocad Environment Using Active Objects X in 6,0 Vb)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 54-56
summary	In this paper, the programming methodology and the results obtained in the development of the GestarCAD simulation application as web as flow net design are presented. As a graphic interface AutoCAD is used, programming the application in Visual Basic 6.0 and using the objects Active X implemented by the latest versions of AutoCAD. In this way, both data input and plotting of results can be carried out from an AutoCAD environment.
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	ecaade03_601_68_penttila
id	ecaade03_601_68_penttila
authors	Penttilä, Hannu
year	2003
title	Survey of Architectural-ICT in the Educational Curriculumns of Europe
doi	https://doi.org/10.52842/conf.ecaade.2003.601
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 601-606
summary	The paper documents the findings of the post-graduate study carried out among the 180 European schools of architecture in more than 30 countries during 2002-2003. The objective has been to describe the role of ""modern digital information technology"" and to give an understandable and measurable overview the current architectural education and its relation with ICT and CAAD. The study material has been collected with a web-survey, with questionnaires to eCAADe-conference participants in Helsinki 2001 and Warsaw 2002, and with direct email-contacts to schools’ key-persons. Computer-aided design has developed into architectural information and communication technology (ICT), to become the main tool of the majority. The general image of new media use in the architectural schools seems to be slightly too positive. The invisible or ”normal” ICT-use - writing, surfing, emailing - has a lot more volume than documented. The major hardware platform in european architecture schools is PC/Windows (90-95 %), Linux and Unix are used also commonly (25-35 %). Macintoshes are also used much more widely within architecture (50-55 %) than within the common computing platforms. MS/Office (90-95 %) and PhotoShop (85-90 %) are obviously also used widely in the architecture schools. Graphic tools PageMaker, QuarkXpress, Illustrator, Freehand are common tools for architecture students (30-50 %). AutoCAD is ”the marketing leader"" in architectural platforms (80-90 %) followed by ArchiCAD (60-65 %). MicroStation/Bentley has also a remarkable volume in the schools (35-40 %). 3DStudio is the most common 3D-modelling tool (80-85 %), followed by formZ (35-40 %). Slightly less volume but still remarkable (15-25 %) have Rhino, Maya, Alias, Lightscape and Radiance.
keywords	Architectural education; architectural curriculumns; information and communication technology; IT; ICT; questionnaires; statistics
series	eCAADe
email
more	http://www.arkit.net
last changed	2022/06/07 08:00

_id	f80f
authors	Samiaji, Doddy
year	2001
title	Development Simulator
source	University of Washington, Design Machine Group
summary	Development Simulator is a 3D simulation design application for architects and urban designers. Written in Visual Basic environment, using COM and ActiveX, it serves as a decision-making-support-system that reveals the impact of development numbers to three dimensional building form. The tool combines the power of a drawing program, AutoCAD 2000 and a spreadsheet program, Excel 2000. Development Simulator runs in Windows 2000.
series	thesis:MSc
email
more	http://dmg.caup.washington.edu/xmlSiteEngine/browsers/stylin/publications.html
last changed	2004/06/02 19:12

_id	2f44
authors	Diaz, Monica
year	2001
title	Aplicación del vba en el diseño arquitectónico: diseño de paredes tomando en cuenta el aislamiento acústico aéreo [Application of the Vba in an Architectural Design Case: Walls Design with the Aerial Sound Insulation]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 216-227
summary	Development an application using an object and events language as VBA can reduce the time to programming because it is more intuitive and you can have libraries with procedures. This type of application makes easier to work on the architecture design: it provides information to the architect and guide him in taking the best decision. The time of designing walls considering the acoustical isolation were reduced using a VBA application. The purpose of the present work is to develop an automatic, visual and interactive tool that using a 3D drawing CAD and a object language guide the architect in the design of walls considering the noise from outside and helping the acoustical comfort.
series	other
email
last changed	2003/02/14 08:29

No more hits.