Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 708

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_13
id	avocaad_2001_13
authors	Alexander Koutamanis
year	2001
title	Modeling irregular and complex forms
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Computational technologies provide arguably the first real opportunity architectural design has had for a comprehensive description of built form. With the advent of affordable computer-aided design systems (including drafting, modeling, visualization and simulation tools), architects believe they can be in full control of geometric aspects and, through these, of a wide spectrum of other aspects that are implicit or explicit in the geometric representation. This belief is based primarily on the efficiency and effectiveness of computer systems, ranging from the richness and adaptability of geometric primitives to the utility of geometric representations in simulations of climatic aspects. Such capabilities support attempts to design and construct more irregular or otherwise complex forms. These fall under two main categories: (1) parsing of irregularity into elementary components, and (2) correlation of the form of a building with complex geometric structures.The first category takes advantage of the compactness and flexibility of computational representations in order to analyse the form of a design into basic elements, usually elementary geometric primitives. These are either arranged into simple, unconstrained configurations or related to each other by relationships that define e.g. parametric relative positioning or Boolean combinations. In both cases the result is a reduction of local complexity and an increase of implicit or explicit relationships, including the possibility of hierarchical structures.The second category attempts to correlate built form with constraints that derive usually from construction but can also be morphological. The correlation determines the applicability of complex geometric structures (minimally ruled surfaces) to the description of a design. The product of this application is generally variable in quality, depending upon the designer's grounding in geometry and his ability to integrate constraints from different aspects in the definition of the design's geometry.Both categories represent a potential leap forward but are also equally hampered by the rigidity of the implementation mechanisms upon which they rely heavily. The paper proposes an approach to making these mechanisms subordinate to the cognitive and technical aspects of architectural thinking through fuzzy modeling. This way of modeling involves a combination of (a) canonical forms, (b) tolerances around canonical forms and positions, (c) minimal and maximal values, (d) fuzzy boundaries, and (e) plastic interaction between elements based on the dual principles of local intelligence and autonomy. Fuzzy models come therefore closer to the intuitive manners of sketching, while facilitating transition to precise and complex forms. The paper presents two applications of fuzzy modeling. The first concerns the generation of schematic building layouts, including adaptive control of programmatic requirements. The second is a system for designing stairs that can adapt themselves to changes in their immediate environment through a fuzzy definition of geometric and topological parametrization.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	8999
authors	Regot, J., De Mesa, A. and García, N.
year	2001
title	EL ANÁLISIS DE LAS FORMAS DE LA ARQUITECTURA A PARTIR DE LA GENERACIÓN DIGITAL DE SUPERFICIES. RONCHAMP (The Analysis of Architectural Forms with departure on the Digital Generation of Surfaces. Ronchamp)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 295-298
summary	Continuing with our research in free-form surface models, this paper proposes a methodology that analyzes the basic entities of architectural forms to generate virtual models with a high range of accuracy. We use NURBS technology because this kind of entities has very large characteristics of generation, transformation and modification in front of mesh’s entities. The complexity of free form models generation it can be reduced substantially, if an accurate analysis of the object allows define its basic entities. In the architectural surface generation, it is possible to define the required parameters to build complex models designed by architects. An experience with the three-dimensional modeling of Ronchamp chapel roof allows applies the proposed methodology.
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	5cf4
id	5cf4
authors	Barrionuevo, Luis F.
year	2004
title	LOS "SPIROSPACES"
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 179-187.
summary	This paper deals with “Spirospaces”. These are a conversion to the third dimension of the two dimensional geometric entities called “Spirolaterals”. Abelson, Harold, diSessa and Andera (1968) gave the first rules concerning Spirolaterals. To obtain a Spirolateral from a set of straight lines, the first of them must be one unit long and the following must be incremented one unit at each step, at the same time that they turn in a constant direction. Odds (1973) establish the variation of the rotation direction, either to the left or the right. However, he did not give a mathematical relation able to calculate open Spirolaterals. Krawczyk (2001) developed a computer program that generates Spirolaterals following the method suggested by Abelson. These are Spirolaterals obtained by enumeration without a predictive mathematical formula. Krawczyc went farther proposing Spirolaterals based in curved lines. He pointed out that there are a variety of spirolateral forms that have architectural potentiality. Following this, the architectural potentiality of Spirolaterals is the basis of this paper. To take advantage of that potentiality a computer program was implemented to generate spatial configurations based in Spirolaterals. When a third dimension is given to the Spirolaterals they become Spirospaces. These new entities need spatial and design parameters to be useful for architectural purposes. Barrionuevo and Borsetti (2001) gave results about that work establishing the concept of Spirospaces. The aim of this paper is to describe a work directed to improve rules and procedures concerning Spirospaces. It is expected that these procedures governed by the proposed rules can be employed as tools during the early steps in the architectural design process. In this work some aspects concerning Spirospaces are considered. First, Spirolaterals are presented as the predecessors of Spirospaces. Second, Spirospaces are defined, together with their structural parameters. Architectural modeling is studied at the light of two special elements of the Spirospaces: Interstitial spaces and Object spaces. Next, a computer program is presented as the appropriate tool to model configurations having architectural potentiality. Finally, the results obtained running the computer program are analyzed to determine their possible use as architectural forms. Several graphic illustrations are presented showing steps going from the exploration of spatial alternatives to the selection of a specific configuration to be developed. It is expected that the described computer program could be employed as a design aid tool. As the operation of the program generates a variety of spaces able to dwell architectural objects, it eases the search of configurations suitable to specific functions. The results obtained have the possibility of being exported to computer graphic applications able to add materials, lights and cameras.
keywords	Spirolaterals, Spirospaces, architectural spaces, interstitial spaces, objectual spaces
series	other
type	normal paper
email
last changed	2005/04/07 15:34

_id	0277
authors	Brusilovsky, P.
year	2001
title	Adaptive hypermedia
source	User modelling and User-Adapted Interaction, volume 11, pp. 87-110, Kluwer
summary	Hypertext/hypermedia systems and user-model-based adaptive systems in the areas of learning and information retrieval have for a long time been considered as two mutually exclusive approaches to information access. Adaptive systems tailor information to the user and may guide the user in the information space to present the most relevant material, taking into account a model of the user's goals, interests and preferences. Hypermedia systems, on the other hand, are `user neutral': they provide the user with the tools and the freedom to explore an information space by browsing through a complex network of information nodes. Adaptive hypertext and hypermedia systems attempt to bridge the gap between these two approaches. Adaptation of hypermedia systems to each individual user is increasingly needed. With the growing size, complexity and heterogeneity of current hypermedia systems, such as the World Wide Web, it becomes virtually impossible to impose guidelines on authors concerning the overall organization of hypermedia information. The networks therefore become so complex and unstructured that the existing navigational tools are no longer powerful enough to provide orientation on where to search for the needed information. It is also not possible to identify appropriate pre-defined paths or subnets for users with certain goals and knowledge backgrounds since the user community of hypermedia systems is usually quite inhomogeneous. This is particularly true for Web-based applications which are expected to be used by a much greater variety of users than any earlier standalone application. A possible remedy for the negative effects of the traditional `one-size-fits-all' approach in the development of hypermedia systems is to equip them with the ability to adapt to the needs of their individual users. A possible way of achieving adaptivity is by modeling the users and tailoring the system's interactions to their goals, tasks and interests. In this sense, the notion of adaptive hypertext/hypermedia comes naturally to denote a hypertext or hypermedia system which reflects some features of the user and/or characteristics of his system usage in a user model, and utilizes this model in order to adapt various behavioral aspects of the system to the user. This book is the first comprehensive publication on adaptive hypertext and hypermedia. It is oriented towards researchers and practitioners in the fields of hypertext and hypermedia, information systems, andpersonalized systems. It is also an important resource for the numerous developers of Web-based applications. The design decisions, adaptation methods, and experience presented in this book are a unique source of ideas and techniques for developing more usable and more intelligent Web-based systems suitable for a great variety of users. The practitioners will find it important that many of the adaptation techniques presented in this book have proved to be efficient and are ready to be used in various applications.
series	other
email
last changed	2003/04/23 15:14

_id	7e02
authors	Elger, Dietrich and Russell, Peter
year	2002
title	The Virtual Campus: A new place for (lifelong) learning?
doi	https://doi.org/10.52842/conf.ecaade.2002.472
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 472-477
summary	472 eCAADe 20 [design e-ducation] Modeling Real and Virtual Worlds Session 13 In the early spring of 2001 a collection of German universities founded a virtual faculty of architecture, which was named „Liquid Campus“. Current thinking about future forms of education in the field of architecture combined with over 4 years of experience with net-based design studios, led to questions about the future of existing universities, their buildings and their use. This problem was put to 43 students in the form of a design exercise to create a place for a virtual university. In the current situation, in which the administration of knowledge is more and more located on the internet, and even the so-called meeting places themselves can be virtualised through the help of video-conference-software, the exercise was to design a virtual campus in the framework and to carry out this design work in a simulation of distributed practice. Initial criticism of the project came from the students in that exemplary working methods were not described, but left for the students to discover on their own. The creation of a concept for the Liquid Campus meant that the participants had to imagine working in a world without the face to face contacts that form the basis (at present) of personal interaction. Additionally, the assignment to create or design possible links between the real and the virtual was not an easy task for students who normally design and plan real physical buildings. Even the tutors had difficulties in producing focused constructive criticism about a virtual campus; in effect the virtualisation of the university leads to a distinctive blurring of its boundaries. The project was conducted using the pedagogical framework of the netzentwurf.de; a relatively well established Internet based communication platform. This means that the studio was organised in the „traditional“ structure consisting of an initial 3 day workshop, a face to face midterm review, and a collective final review, held 3,5 months later in the Museum of Communication in Frankfurt am Main, Germany. In teams of 3 (with each student from a different university and a tutor located at a fourth) the students worked over the Internet to produce collaborative design solutions. The groups ended up with designs that spanned a range of solutions between real and virtual architecture. Examples of the student’s work (which is all available online) as well as their working methods are described. It must be said that the energy invested in the studio by the organisers of the virtual campus (as well as the students who took part) was considerably higher than in normal design studios and the paper seeks to look critically at the effort in relation to the outcomes achieved. The range and depth of the student’s work was surprising to many in the project, especially considering the initial hurdles (both social and technological) that had to overcome. The self-referential nature of the theme, the method and the working environment encouraged the students to take a more philosophical approach to the design problem. The paper explores the implications of the student’s conclusions on the nature of the university in general and draws conclusions specific to architectural education and the role of architecture in this process.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	8805
authors	Flemming, U., Erhan, H.I. and Ozkaya, I.
year	2001
title	Object-Oriented Application Development in CAD
source	Technical Report 48-01-01. Pittsburgh, PA: Carnegie Mellon University, Institute of Complex Engineered Systems
summary	This report describes a graduate interdisciplinary course offered to students in the graduate program of the School of Architecture at Carnegie Mellon and related departments in fall 2000. The motivation was the realization that when commercial CAD (Computer-Aided Design) systems recently switched from procedural application programming languages to object-oriented ones, third-party application must undergo a significant cognitive retooling"; i. e. they must know more than the syntax and semantics of the new programming language to be used and must be able to employ appropriate software development strategies that are appropriate for the new paradigm. especially with respect to the importance of modeling, a distinguishing characteristic of object-oriented programming. The goal of the course was (a) to introduce and test strategies of object-oriented application development in general and in the context of MicroStation, a state-of-the-art commercial CAD package; (b) to develop-as a course team project-an interesting application that gives students practice with these strategies and team work; and (c) to document our approach and findings so that others can learn from them. The strategies introduced were the use-case approach of Jacobson et al. and the complementary object-modeling tools of Rumbaugh that were recently integrated into the Unified Modeling Language UML. The software platform supporting the course comprised MicroStation, JMDL (a superset of Java) and ProjectBank on the CAD side and RationalRose on the modeling side. The application developed by students in the course supports the generation of drawings for remodeling projects from a set of dgn files describing the existing state of the building to be remodeled. The course was supported by a grant and in-kind contributions from Bentley with matching funds from the Pennsylvania Infrastructure Technology Alliance (PITA)."
series	report
email
last changed	2003/04/23 15:50

_id	811d
authors	Goulthorpe, M., Burry, M. and Dunlop, G.
year	2001
title	Aegis Hyposurface©: The Bordering of University and Practice
doi	https://doi.org/10.52842/conf.acadia.2001.344
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 344-349
summary	Throughout history, profound technological shifts have been accompanied by significant cultural changes. The current shift from a technical paradigm based on physical, mechanical production to one based on electronic media impacts on forms of architectural practice in unexpected ways. The use of design software not only enhances graphic and modeling capacity but also reveals new possibilities for both form generation and fabrication. At a more subtle level it may influence the patterns of thought and creativity that have underpinned traditional forms of architectural practice. This paper examines the implications of the redefined praxis by considering the new role of ‘town and gown’ in the production of the interactive hypersurface: the AegisHypersurface©, the first working prototype of which was unveiled in March 2001.
keywords	Real-Time Animation, Interactive Architecture, Hypersurface
series	ACADIA
email
last changed	2022/06/07 07:51

_id	da9f
authors	Kamat, Vineet R. and Martinez, Julio C.
year	2001
title	Visualizing Simulated Construction Operations in 3D
source	Journal of Computing in Civil Engineering -- October 2001 -- Volume 15, Issue 4, pp. 329-337
summary	Simulation modeling and visualization can substantially help in designing complex construction operations and in making optimal decisions where traditional methods prove ineffective or are unfeasible.However, there has been limited use of simulation in planning construction operations due to the unavailability of appropriate support tools that can provide users with a more realistic and comprehensiblefeedback from simulation analyses. Visualizing simulated construction operations in 3D can significantly help in establishing the credibility of simulation models. 3D visualization can also provide valuableinsight into the subtleties of construction operations that are otherwise nonquantifiable and presentable. This paper describes the methodology and a first version of a general-purpose 3D visualization system thatis simulation and CAD software independent. This system, the Dynamic Construction Visualizer, enables spatially and chronologically accurate 3D visualization of modeled construction operations and theresulting products.
series	journal paper
last changed	2003/05/15 21:45

_id	3322
authors	Klinger, Kevin R.
year	2001
title	Making Digital Architecture: Historical, Formal, and Structural Implications of Computer Controlled Fabrication and Expressive Form
doi	https://doi.org/10.52842/conf.ecaade.2001.239
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 239-244
summary	Digital output from computer modeling represents a significant new method for visualization and fabrication of architecture. The ability to move directly from three-dimensional modeling to real three-dimensional output challenges the need for traditional means of representation such as plan, section, etc. Moreover, the necessity for conversion of architectural intentions into a code (construction documents, shop drawings, etc.) to be translated by the contractor will also be tested with these new potentials in fabrication. This subjugation of traditional forms of representation and fabrication has serious implications for architectural design process and production. The intention of this paper is to scrutinize underlying issues inherent in a design process of developing architectural solutions using the computer both as a tool for threedimensional visualization as well as for guiding three-dimensional fabrication. Precedent of historic expressive architectural form (seen through the lens of fabrication) will be presented to lay the foundation for the examination of new fabrication techniques and structural concerns for computer generated expressive forms. A series of rapid prototype studies from a digital architecture seminar will also be analyzed to outline the need for developing visualization/fabrication process ideas and research into methods for making digital architecture.
keywords	Expressive Form, Digital Visualization, Digital Fabrication, Rapid Prototyping, Five-Axis Milling
series	eCAADe
email
last changed	2022/06/07 07:51

_id	17ba
authors	Koutamanis, Alexander
year	2001
title	Fuzzy Modeling of Floor Plan Layout
doi	https://doi.org/10.52842/conf.acadia.2001.314
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 314-321
summary	Fuzzy modeling provides methods and techniques for qualifying and quantifying imprecise and uncertain information. The main advantages of fuzzy design representation are fluency, abstraction and continuity, at a level similar to that of analogue techniques, as well as the possibility of local autonomy, i.e. segmentation of a representation into self-regulating and cooperating components. The paper investigates the applicability of fuzziness to digital architectural sketching of floor plan layouts. Based on an analysis of the paradigmatic dimension in analogue floor plan sketches three alternative forms are proposed: (1) Canonical objects with tolerances, (2) objects described by minimal and maximal values, and (3) point sets which decompose the form of an object into a number of discrete, autonomous particles that describe the object by their position and spatial or structural relationships.
keywords	Representation, Sketching, Floor Plan, Fuzziness
series	ACADIA
email
last changed	2022/06/07 07:51

_id	49fc
id	49fc
authors	KOUZELEAS Stelios, SEMIDOR Catherine
year	2001
title	THE INFLUENCE OF THE SIMPLIFIED ARCHITECTURAL MODEL ON THE ACOUSTICAL SIMULATION RESULTS
source	17th International Congress on Acoustics, Proceedings : Vol. III - Architectural acoustics - Opera house acoustics - p. 46-47 – ISBN : 88-88387-02-1, 2-7 Septembre 2001, Rome, Italy
summary	The sometimes complex architectural shape of halls creates modelling difficulties as the simulation computing systems need plane surfaces. In order to approach a perfect shape of curved surfaces, a big number of facets is necessary. This poses, as a consequence, computer memory problems which is the case of the horse shoe shaped Opera House with its richly decorated columns, balconies, etc. This paper compares the acoustical measurement results and the calculation results of a computer simulation software applied on several models (from the most simple till the most complex ones) of the Grand Theatre of Bordeaux.
keywords	Acoustics simulation, CAD modeling, room acoustics, architectural model simplification
series	other
type	normal paper
email
more	http://ims-ism.nrc-cnrc.gc.ca/ica/proceedg.html
last changed	2005/10/24 19:59

_id	2005_695
id	2005_695
authors	Kouzeleas, Stelios Th.
year	2005
title	Definition of a Method of Limits of the Simplification of a Hall Model in a CAD System to Diminish Falsification of Acoustic Simulation Results
doi	https://doi.org/10.52842/conf.ecaade.2005.695
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 695-704
summary	During the modelling, because of the sometimes complex architectural shape of halls, we were forced to introduce simplifications in order to carry out calculations and simulation operations on these halls, as the calculation software requires plane surfaces. This paper presents a developed tool adapted on a CAD modelling system (AutoCAD), which defines an “average limits” of the model simplification operation in order to control and diminish the falsification of calculation and simulation results on this model, such as the architectural acoustic simulation. The process of the elaboration and the adjustment of the simplified models of the Grand Theatre of Bordeaux (GTB) based on acoustical measurements and their calculation results are described in detail in a previous article (Kouzeleas and Semidor, 2001). The analysis process of the consequences of the hall model simplification on the acoustical simulation results and the applied simplification methods are described in a PhD thesis (Kouzeleas, 2002). This article is based on this analysis process in order to apply it on several simplified models of the Amphitheatre of the Architecture School of Bordeaux (Amphi- EAPB). The comparison in a CAD system (AutoCAD) of the acoustical calculation results and the areas after simplification of the simplified models of these two halls made with AutoCAD, via the developed tool adapted on the AutoCAD, permit to define a “limits average of a hall model simplification” before the falsification of these calculation results.
keywords	Calculation Cad Program Integrated Development ; Design Process ; 3D Modeling ; Performance Simulation ; Acoustic Simulation Results
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ga0109
id	ga0109
authors	Lewis, Chak Chan
year	2001
title	Defects Defined by Form Making Method for Improving Generative Design System
source	International Conference on Generative Art
summary	Evolutionary-based Generative Design System (GDS) is generally designed for industrial designers during the early stage of conceptual design. Although “additive” Rapid Prototyping (RP) methods are commonly applied for the physical realization, grown Surfaces Object (SO) created from these GDS still has room to be considered to a combined workable volume,especially for the more complex design. The inarticulate processes from GDS to Generative Production System (GPS) are linking up with different aspects and contexts as well as the conventional Computer-Aided Design (CAD)/RP integration, which has been conducted for along time. There are design constraints existing between 3D SO in industry design representation and feasible 3D production solution. Perception to object designing with knowledge is limited at SO forming by incomplete interpretations. Meanwhile, it is difficult to discern the problemsof incomplete object generation as hidden illegal design occurred from time to time because of the design constraints, despite the completion of the design representation. It has led to some of the invalidity of surface feature at the end. The reconstruction of the RP process ofthe SO pre-processing procedure can help to clarify these defects with thickness requirement in generative production. The aim of this paper is to verify an effective generative design strategy as a possibility ofimplementing method(s) or tool. They will be built within a surface-oriented GDS by mapping a valid object directly accepted by any RP system without any influence on generative object creating. Through the involvement of Form Making processes of RP from selected instants with their solid phenomena, evidences are used for defending this viewpoint.Throughout the process, generative design method and CAD method have been utilized for the creation of virtual form. The 3D printer and Fused Deposition Modeling (FDM) technology with “trial and error” method were employed in the RP processes.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	05bb
authors	Marina González de Kauffman, Ede Martinez de Adrianza, Carlos González Hernández
year	2001
title	Aplicacion de la programacion en cad para la modelizacion de trazados urbanos [Application of CAD-Programming for the Modeling of Urban Layouts]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 228-236
summary	To generate models of branched and reticular urban layouts, under three different forms of growth (linear, radial, strips), a program designed on AutoLISP Æ for the AutoCAD Æ V-2000 has been proposed. The generated models are both graphical as well as mathematical, and for each case are produced, considering the two variables assumed as inputs: the number of houses and the number of grouping units. The mathematical data is automatically saved in a MSExcel Æ spreadsheet created through a direct connection established from the AutoCAD Æ V-2000.
series	other
email
last changed	2003/02/14 08:29

_id	8d1a
authors	Martens, Bob and Voigt, Andreas
year	2001
title	Virtual and full-scale modeling: A collection of resources
doi	https://doi.org/10.52842/conf.caadria.2001.201
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 201-204
summary	In this paper the relationship between Virtual and Full-scale Mo-deling will be traced back. A number of publications supports the dis-semination of existing knowledge resp. experiences. Although a series of biannual EFA-Conferences (European Full-scale Modeling Association) produced a remarkable number of useful papers, the "scientific output" beyond this platform remained to be so far in the dust of gray literature. On the other hand the rapid growing interest for computer applications and tools rediscovered the working area of 1:1 simulation more or less the other way around. Although the term VR in the nineties was strongly occupied by computer-interfaces resp. -representations, soon the insight gained in importance that reality is by far more complex than some 10.000 polygons. Furthermore, some kind of unproductive competition resp. defense of good old modeling tra-ditions versus promising computer technology seemed to act as the main activity. However, the fusion of Virtual and Full-Scale Mo-de-ling could indefinitely serve as a promising field of research.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	1fcd
authors	Ng, S. Thomas
year	2001
title	EQUAL: a case-based contractor prequalifier
source	Automation in Construction 10 (4) (2001) pp. 443-457
summary	Many researchers have observed that contractor prequalification relies heavily on expert judgement. Experiential judgement is required in decision situations when it would be too costly to measure a large amount of information quantitatively and it is also invaluable in providing shortcuts for complex tasks. However, the quality of heuristic knowledge depends upon the experiences of the decision-makers. The development and use of a case-based reasoning (CBR) system can help decision-makers to produce more reliable and expeditious decisions for contractor prequalification. An Expert preQUALifier –– EQUAL –– has been developed using the CBR approach. This paper describes the components of EQUAL and illustrates the functionality and operation of the system through a trial run with hypothetical cases. The results of testing reveal that experts were satisfied with the accuracy and overall performance of EQUAL, and CBR approach is suitable for modeling the contractor prequalification domain.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	679c
authors	Norman, Frederick
year	2001
title	Towards a Paperless Studio
doi	https://doi.org/10.52842/conf.acadia.2001.336
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 336-343
summary	The infusion of digital media into the practice of architecture is changing how we design as well as what we design. Digital media has altered the process of design and the culture of design education. The question before us is how does one transition from a completely analog system of representation to one of complete computer immersion or the “paperless studio”. Schools of Architecture have already begun to struggle with the physical issues of integration of new media (infrastructure and economics). But the pedagogical integration of new media should be of a greater concern. New media and its forms of representation are challenging traditional skills of communication and representation, (i.e., sketching, hand drawing and physical model making). The paradox facing architectural practice today is the integration of new media into a realm where traditional or manual forms of representation are ingrained into how we think, produce and communicate. We must ask ourselves, must new media be held to the traditional forms of representation?
keywords	Digital Media, Design Studio, 3D Modeling, Animation
series	ACADIA
email
last changed	2022/06/07 07:58

_id	7655
authors	Okeil, Ahmad and El Araby, Mostafa
year	2003
title	Realism vs. Reality in Digital Reconstruction of Cities
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	The digital reconstruction of existing cities using virtual reality techniques is being increasingly used. For consultants, municipalities and planning departments these models provide decision support through visual simulations (El Araby, 2001). For academia they provide a new tool for teaching students urban design and planning (Okeil, 2001). For authorities they provide a tool for promoting the city on the world wide web trying to attract more businesses and tourists to it. The built environment is very rich in detail. It does not only consist of open spaces surrounded by abstract buildings but it also includes many smaller objects such as street furniture, traffic signs, street lights, different types of vegetation and shop signs for example. All surfaces in the built environment have unique properties describing color, texture and opacity. The built environmentis dynamic and our perception is affected by factors such as pedestrian movement, traffic, environmental factors such as wind, noise and shadows. The built environment is also shaped by the accumulation of changes caused by many influences through time. All these factors make the reconstruction of the built environment a very complex task. This paper tries to answer the question: how realistic the reconstructed models of urban areas can be. It sees “Realism“ as a variable floating between three types of realties. The reality of the physical environment which we are trying to represent. The reality of the digital environment which will host the digitally reconstructed city. And the reality of the working environment which deals with the problem of limitation of resources needed to digitally reconstruct the city. A case study of building a 3D computer model of an urban area in the United Arab Emirates demonstrates that new time-saving techniques for data acquisition can enhance realism by meetingbudget limitations and time limitations.
keywords	Virtual Reality; Photo Realism; Texture Maps; 3D Modeling; Urban Design
series	other
email
last changed	2003/03/11 20:39

_id	9e31
authors	Osman, Yasser
year	2001
title	The Use of Tools in the Creation of Form: Frank (L. Wright & O. Gehry)
doi	https://doi.org/10.52842/conf.acadia.2001.044
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 044-051
summary	This paper is a study of shape, attempting to understand the effect of Computer Aided Architecture Drafting and Design on the Geometry of Form. This is a part of a larger question: When the tool of presentation changes, does the form generated change as well? The study is in two main parts: 1 Comparing two Guggenheim Museums. 2 Re-Modeling Bilbao Museum. The final questions are: why does form become more complex? How do architects use tools to obtain more complexity? What Computer Aided Architecture Design programs let architects achieve more complexity? For an architect, is the motivation to demonstrate a set of 3D geometric operations sufficient to generate complex assemblies, and are there other possible operations needed?
keywords	Form, Tool, Digital, Model
series	ACADIA
email
last changed	2022/06/07 08:00

_id	6df6
authors	Pratini, Edison
year	2001
title	New Approaches to 3D Gestural Modeling - The 3D SketchMaker Project
doi	https://doi.org/10.52842/conf.ecaade.2001.466
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 466-471
summary	The 3D SketchMaker project has developed two prototypes for a gestural 3D sketching system to be used in the earliest phases of the design process. The goal of this ongoing research is to provide architects, and other designers involved in object conception, with a 3D gestural instrument that takes advantage of new virtual reality resources and is more natural than using the mouse, less difficult than learning complex software and less abstract than manipulating 2D entities on orthogonal projections. The system was conceived to assist or replace the first 2D drawing steps in the design process, generating rough 3D sketches that can be refined later using any 3D package. It is, in essence, a 3D modeling system directed to do sketching with hand movements and gestures in a virtual reality environment.
keywords	Gestural Interface, Virtual Reality, 3D Modeling, Sketching
series	eCAADe
last changed	2022/06/07 08:00

For more results click below: