Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 717

Reformat results as: short short into frame detailed detailed into frame

_id	4112
authors	Raposo, M., Sampio, M. and Raposo, P.
year	2001
title	A City Simulator
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 052-061
doi	https://doi.org/10.52842/conf.acadia.2001.052
summary	This paper presents a new computer model for city skyline simulation. It works by shaping medium and high-rise buildings to their best performance. This new tool was conceived to simulate and analyze cities where tall buildings are emerging on pre-existing urban schemes with irregular geometry and where inter-building spacing is proportional to the height of built blocks. The model is based on two main inputs, namely: the description of the network formed by land subdivision of the actual or irregular urban schemes, and the building regulations quantitative parameters based on solar obstruction angles and maximum usability rates. By combining data from these inputs, the computer model presents the dimensions of the building envelop for maximum profitability of each plot. That way the architect will immediately know the number of floors that leads to the maximum built area, for certain plots. In addition to this, the built blocks images are presented in the screen, as well as corresponding tables and Cartesian graphs. Furthermore, this model can also be used for analyzing city skyline for large urban areas. This analysis can range from a mere visual inspection of the variety of images built blocks will take under different legal constraints, to a more intricate analysis of how city skyline and built area, amongst others, are affected by different the regulations.
keywords	Computing City Shape, Land use performance, Computing city skyline, Urban network design, Computing City Architecture.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	7e52
authors	Achten, Henri
year	2001
title	Normative Positions in Architectural Design - Deriving and Applying Design Methods
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 263-268
doi	https://doi.org/10.52842/conf.ecaade.2001.263
summary	This paper presents a recently finished course of eight weeks where CAAD skills, design methodology, and architectural theory are combined to discuss possible perspectives on the use of the computer in design, and its influence on architecture. In the course, three contemporary architects were studied; Peter Eisenman, Ben van Berkel, and Greg Lynn. Each was discussed on aspects of ontology (which are the elements of discourse), design method (design process and organization of the process), and the use of the computer (techniques and approaches). These were linked with design theory, architectural theory, and CAD-theory. The reflection on the work of the architects resulted in a number of design methods for each architect. The design methods were adapted to the available technologies in the university as well as to the scope of the exercise, since the period of eight weeks for an exercise cannot compete with design processes in practice that take many participants and much time. The students then applied the design methods to a design task: student housing and an exhibition pavilion on the campus area of the university. The task was so devised, that students could focus on either architectural or urban design level with one of the design methods. Also, the choice of architects and accompanying design methods was made in such a way that students with low, medium, and advanced computer skills could take part in the course and exercise. In a workshop held at the Czech Technical University (CVUT) in Prague, the same procedure was used in a one-week period for a different design task, but in an otherwise almost identical setting with respect to the CAAD software used. The methods and material were easily transferred to the other setting. The students were able to cope with the task and produced surprising results in the short time span available. The paper will provide an overview of the course, discuss the pedagogical implications of the work, and discuss how this particular work can be generalized to incorporate other architects and approaches.
keywords	CAAD: Design Methods, Pedagogy
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2010_043
id	caadria2010_043
authors	Barker, Tom and M. Hank Haeusler
year	2010
title	Urban digital media: facilitating the intersection between science, the arts and culture in the arena of technology and building
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 457-466
doi	https://doi.org/10.52842/conf.caadria.2010.457
summary	The research presented in this paper investigates ways of providing better design applications for technologies in the field of Urban Digital Media (UDM). The work takes an emergent approach, evolving a design strategy through the early engagement of stakeholders. The paper discusses research in a design-led creative intersection between media technology, culture and the arts in the built environment. The case study discusses opportunities for the enhancement of a university campus experience, learning culture and community, through the provision of an integrated digital presence within campus architecture and urban spaces. It considers types of information architecture (Manovich, 2001) and designs for use in urban settings to create communication-rich, advanced and interactive designed spaces (Haeusler, 2009). The presented research investigates how to create a strategy for display technologies and networked communications to transform and augment the constructed reality of the built environment, allowing new formats of media activity.
keywords	Urban design; outdoor digital media; information architecture; multidisciplinary design; augmented reality; media facades
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	5ac1
authors	Bourdakis, Vassilis
year	2001
title	On Developing Standards for the Creation of VR City Models
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 404-409
doi	https://doi.org/10.52842/conf.ecaade.2001.404
summary	The paper is an inclusive summary of research work on creating VR city models carried out over the last six years in the UK and Greece aiming to put into discussion the guidelines/ rules developed by the author. The paper is structured in three sections referring to the main stages in terms of either technical expertise and problem solving or conceptual structuring of information: creation of 3D city models, CAAD versus VR in digital city modelling and finally utilizing digital city models. The expected outcome of the work presented is the establishment of a body of knowledge that will facilitate the development of standards and guidelines for the creation of city models. There are obvious advantages in having a compatible set of city 3D models. On the other hand, there are different rules to be followed and issues to be solved, according to the scale of the model, level of detail that is needed—all these rules relate to the projected use of the model.
keywords	Digital City Models, 3D Modelling, Virtual Reality, Urban Planning
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2178
authors	Chevrier, C. and Perrin, J.P.
year	2001
title	Interactive 3D reconstruction for urban areas. An image based tool
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 753-765
summary	Urban applications (for example arrangement, new buildings, virtual sightseeing and walkthrough) require a three dimensional (3D) geometrical model of town areas. However, most of them do not need an accurate model of reality. Such model would occupy a considerable memory space and would be too slow to handle. Architects, urban designers and civil engineers can find in our tool a medium to conceive their projects. Some types of software exist but they do not correspond exactly to our needs. Consequently we have conceived and developed an interactive tool for virtual 3D rough reconstruction of buildings. The software development has been performed in the Maya environment (ALIAS Wavefront) with C++ language and MEL (Maya Embedded Language). A constraint we set for ourselves was the use of only light devices (for easy transportation) at low price (everybody can buy such devices). The principle is to overlay on the scanned photograph of the area we want to deal with, the two dimensional (2D) cadastral plan displayed from the same viewpoint as the picture. Then each building body can be extruded from its ground polygon and the roof can be created from what the user sees on the picture. A constraint is the flatness of the polygonal surfaces. Our application context was the town of Nancy in France for which some areas have been reconstructed. Some pictures have been used as textures for polygonal surfaces, giving more reality effect to the simulation.
keywords	Geometrical Modelling, Architecture, Urban Area, Virtual Visit
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	1b32
authors	Da Conceição Garcia, Cláudia and De Souza Tenorio, Gabriela
year	2001
title	UMA REFLEXÃO SOBRE PROPOSTA PEDAGÓGICA DO ENSINO DA COMPUTAÇÃO GRÁFICA NO CURSO DE ARQUITETURA E URBANISMO (A Reflection on a Pedagogical Proposal for Teaching Computer Graphics in an Architecture and Urbanism Course)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 224-226
summary	In the last few years, the use of computers methods on architecture and urban undergraduate courses have been a matter of criticism. Many professors and lectures argue that computers have not contributed for students creativity development. This paper presents a proposal for a graphic computing course of the Faculdade de Arquitetura e Urbanismo of the Universidade de Brasília that aims to use computer in a creative manner. During the last 5 years, faculties from applied architecture computing from our institute have applied new pedagogical strategies to lecture this course. We intend to use this tool not only to express and represent architecture projects, but also to evaluate the development of architecture and urban projects. Our experience on this topic allowed the development of a methodological procedure that focus on the architecture and urban projects and not on the graphic computing software.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	4533
authors	Datta, S., Morison, D. and Roberts, K.
year	2001
title	Pedagogical Templates: A Comparative Study of Higher Order Reflective Making, Playful Design Learning Forum
source	Adelaide University School of Architecture, Landscape Architecture and Urban Design, Adelaide
summary	Schon's notion of reflection-in-action implies a constructivist process of learning, especially valid in the teaching of professional disciplines such as architecture. Action becomes the instrument of conjecture and learning arises in the context of reflection upon the act. Such a process of interleaving action and reflection constitutes a "higher-order" process of reflective making. Research in design studies has shown that strategies for making differ markedly between professional and novitiate designers. Further, such studies have shown that skilled designers employ past experience and precedents to create context for new problem situations. To address the lack of context in novitiate learning situations, we propose the use of "pedagogical templates" for the promotion of "higher-order" strategies in design learning contexts for supporting beginning design students. We focus on the use of digital media, specifically for the design, implementation and delivery of constructive learning situations. This paper presents the use of a pedagogical template in the creation of constructivist contexts for two complementary courses, a traditional design studio and a computermodelling course at Deakin University. The resulting implications for design learning and the integration of physical and digital forms of making through the use of a pedagogical template are discussed.
series	other
last changed	2003/04/23 15:50

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	7eb9
authors	Dokonal, Wolfgang and Martens, Bob
year	2001
title	A Working Session on 3-D City Modeling
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 417-422
doi	https://doi.org/10.52842/conf.ecaade.2001.417
summary	On the occasion of a presentation on a city model for Graz at the eCAADe-conference in Weimar (2000), some attendees informed us about their previous work in this field and the idea of preparing a working session with collegues involved in 3-D city modeling was born. During the initial phase of research for this eCAADe conference activity it turned out that a large number of city models has been created in the course of time for different reasons resp. purposes. Therefore a rich variety in the production of city models can be noticed. This working session on 3-D city modeling brings together experts focusing on different aspects concerning the creation and use of city models, such as data input, data structure, data storage and data quality. Also the definition of a perspective on the future of 3-D city modeling can be regarded as an important topic. In this paper a rough overview on the different submissions will be presented. Furthermore three blitz statements are incorporated as time was too short to produce a full paper. Both with the individual contributions as with this overview paper it is intended to present a knowledge-base to this working field. Finally, the start for a growing bibliography was made in order to support future work in this area.
keywords	Urban Modeling, 3-D Modeling, Collaboration, City Information, Model Adaptation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	270d
authors	Elezkurtaj, Tomor and Franck, Georg
year	2001
title	Evolutionary Algorithms in Urban Planning
source	CORP 2001, Vienna, pp. 269-272
summary	The functions supported by commercial CAD software are drawing, construction and presentation. Until now, no programssupporting the creative part of architectural and urban problem solving are on the market. The grand hopes of symbolic AI ofprogramming creative architectural and urban design have been disappointed. In the meantime, methods called New AI are available.Among these methods, evolutionary algorithms are particularly promising for solving design problems. The paper presents anapproach to town panning and architectural problem solving that combines an evolutionary strategy (ES), a genetic algorithm (GA)and a Particle System. The problem that remains incapable of being solved algorithmically has to do with the fact that in architectureand urbanizm form as well as function count. Because function relates to comfort, easiness of use, and aesthetics as well, it ishopeless to fully specify the fitness function of architecture. The approach presented circumvents a full specification through dividinglabor between the software and its user. The fitness function of town plans is defined in terms only of proportions of the shapes, areasand buildings to be accommodated and topological relations between them. The rest is left to the human designer who interactivelyintervenes in the evolution game as displayed on the screen.
series	other
email
more	www.corp.at
last changed	2002/12/19 12:17

_id	a58e
authors	Evans, S. and Hudson-Smith, A.
year	2001
title	Information Rich 3D Computer Modeling of Urban Environments
source	Working Paper 35, Centre for Advanced Spatial Analysis Working Papers; London, August 2001
summary	We are living in an increasingly information rich society. Geographical Information Systems now allow us to precisely tag information to specific features, objects and locations. The Internet is enabling much of this information to be accessed by a whole spectrum of users. At CASA we are attempting to push this technology towards a three-dimensional GIS, that works across the Internet and can represent significant chunks of a large city. We believe that the range of possible uses for such technology is diverse, although we feel that urban planning is an area that can benefit greatly. An opportunity to push this ìplanning technologyî arose when CASA won a tender from Hackney Council to develop a dynamic website for community participation in the process of regenerating the Woodberry Down Estate. This is a run down part of northeast London that is undergoing a major redevelopment. CASA has developed a system that not only informs the local residents about the redevelopment process but it also enables them to use dynamic visualisations of the ìbefore and after effectsî of different plans, and then to discuss and vote on the variety of options.
series	other
last changed	2003/04/23 15:50

_id	avocaad_2001_06
id	avocaad_2001_06
authors	Giovanni De Paoli
year	2001
title	Architectural design and procedural models - A radical change of language to design in architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The history of architecture and its teaching clearly reveal how representations of the image and drawing have changed over centuries. Today, computers are increasingly found at the desks of architecture professionals and students, but their usage remains restricted to technical functions and what is commonly known as CAD (computer-assisted design), in architecture is often simply the other CAD (computer-assisted drawing).This presentation deals with architectural design, particularly at its earliest stage. Our objective is to propose a model for describing the architectural concept that meets the needs of architects through software. Only then will they really be able to use computers as an aid to design by overcoming the obstacles that presently keep us from making full use of them.This has led me to propose an avenue of exploration that examines projection through an object’s properties, and a method of computer-assisted design that makes use of procedural models. These procedural models consist of geometric operators and operators that define the properties, characteristics and performance of a building — operators which I have termed “semantic”.This research fits into a paradigm that leads to representation of the building through functions that can be called with parameters and encapsuled in an algorithm, making it possible to create procedural models that assist with the design. This approach opens up a means of integrating the logos with the figurative representation where drawing is used instead of words to convey the architectural concept.The example of a procedural model shows how we can use a generic model to produce a volume model with all the characteristics belonging to the same family of objects. This type of model can serve not only to illustrate the result of a process, or to draw connections among buildings on the basis of their construction process, or to test the validity of a rule typical of a set of objects, but also to integrate, through a functional language, semantic operators which to date have been excluded from the initial design phase. This descriptive mechanism is extremely powerful in making it possible to establish relationships among the functions and properties of a building and the purpose of the architectural project.The scientific contribution of this research is to test the hypothesis that we can use computer tools to manipulate operators which enable the architect to reappropriate a complex design of the building, and open up new lines of investigation into integrating geometric and knowledge-based systems into a unified representation. The declarative approach for creating three-dimensional scenes fits into this perspective.It is now a matter of exploring the possibility of working on a “common morphology” shared by everyone involved in the design process by rewriting the functions or by converting the functions used for representation, or else through a functional dialect (language) that allows for dialectic relationships among all types of operators and the actions of the protagonists in the architectural design process.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	f1c4
authors	Holmgren, S., Rüdiger, B. and Tournay, B.
year	2001
title	The 3D-City Model – A New Space
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 430-435
doi	https://doi.org/10.52842/conf.ecaade.2001.430
summary	We have worked with the construction and use of 3D city models for about ten years. This work has given us valuable experience concerning model methodology. In addition to this collection of knowledge, our perception of the concept of city models has changed radically. In order to explain this shift in paradigms we begin by describing some of the concrete models we have made, showing the relationship between model structure (methodology and content) and model use. We also describe the projects we are working on at present in order to illustrate new ideas concerning the potential development of 3D city models.
keywords	Digital 3D City Model, Urban Regeneration, Participatory Design, On Line Community
series	eCAADe
email
last changed	2022/06/07 07:50

_id	6006
authors	Liu, Yu-Tung and Bai, Rui-Yuan
year	2001
title	The Hsinchu experience: a computerized procedure for visual impact analysis and assessment
source	Automation in Construction 10 (3) (2001) pp. 337-343
summary	This paper examines the procedure of visual impact analysis and assessment (VIAA) proposed by Rahman and reviews the use of computer-aided design (CAD) applications in urban projects in the real world. A preliminary computerized procedure for VIAA is proposed. An experiment was conducted in our laboratory to verify the preliminary procedure. In order to further study the revised procedure in real urban projects, it was also applied into the renew project of The Eastern Gate Plaza located in the center of Hsinchu, Taiwan from 1996 to 1998. Based on the face-to-face discussions with Hsinchu habitants, government officials, and professional designers, a final computerized procedure for VIAA is concluded.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	0407
authors	Peng, C., Chang, D.C., Blundell Jones, P. and Lawson, B.
year	2001
title	Dynamic Retrieval in an Urban Contextual Databank System using Java-CGI Communications. Development of the SUCoD Prototype
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 89-102
summary	This paper presents our current development of the Sheffield Urban Contextual Databank (SUCoD) prototype that provides users with a Webbased interface for dynamic retrieval of architectural and urban contextual information of the city of Sheffield. In comparison with past attempts of building Virtual Cities accessible over the Internet, we have experimented with a different system architecture capable of generating VRML models and other related documents on the fly according to users' requests. Through working examples, we describe our methods of implementing the data communications between Java applets and Common Gateway Interface (CGI) scripts. The SUCoD prototype has been developed to explore and demonstrate how user centred dynamic retrieval of urban contextual information can be supported, which we consider a user requirement of primary importance in its future use for collaborative design and research relating to the city of Sheffield.
keywords	Urban Contextual Databank, Dynamic Retrieval, Java, Common Gateway Interface, VRML, HTML, Virtual Cities
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	1373
authors	Pfaffenbichler, Paul C. and Emberger, Günter
year	2003
title	Are European cities becoming similar?
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	The paper discusses city specific development patterns to overcome todays transport problems. The results are based on recent andongoing research activities at TUW-IVV and ITS. At previous CORP-conferences, we presented the basics and the development of aplanning support tool to find optimal policy packages in urban transport and land use (Emberger, 1998), (Pfaffenbichler, Emberger, 2001). The core of this planning support tool is a dynamic land use and transport interaction model. This model, which we refer to as Sketch Planning Model (SPM), is embedded into an appraisal and optimisation framework. The SPM and this framework were developed in the recently finished European Union funded research project PROSPECTS1. Case studies with this planning supporttool were performed within PROSPECTS for the cities Edinburgh, Helsinki, Madrid, Oslo, Stockholm and Vienna. These cities are principally comparable in regards of their status (capitals and major business and education centres), but different in their size, population density, transport system etc. A set of policy instruments like public transport improvements, car traffic restrictions, and infrastructure provision was available to formulate strategies to reduce negative impacts of transport and to increase welfare. The overall objective was a sustainable development of the city. Although the instruments and the goals are similar in all investigatedcites, different solutions were adequate. The solutions vary in regard of spatial implementation, implementation time and level of implementation. The paper will highlight some reasons for the different development paths of the cities. As well the comparison of the do nothing scenario as the comparison of the most feasible policy strategies shows that European cities are different, need different solutions for their problems and will stay different in the future.
series	other
email
last changed	2003/03/11 20:39

_id	avocaad_2001_07
id	avocaad_2001_07
authors	Stefan Wrona, Adam Gorczyca
year	2001
title	Complexity in Architecture - How CAAD can be involved to Deal with it. - "Duality"
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	“Complexity “ is for us a very ambigous notion. It may be understood in two contexts.1.Thorough solution of a problem.Complexity means full recognition of design area, followed by appropriate work. That work must be thorough and interdisciplinary – if necessary, separated to different co-operatives. These trade designers reqiure a branch coordination and – the most important- all of them must have a „common denominator”. Such as a proper CAAD platform and office standards. That will reduce costs of changes, improve an interplay between designers and somtimes enable to face up a new challenge.Nowadays architects are no longer “solitary” individualists working alone – they must concern a team – they become a member, a part of a huge design machine. “Import/export”, compatibility, interplay – these words must appear and we have to put a stress on them. How to organize work for different trade-designers? How to join in common database architectural design ,engineering design, HVAC design, electricity design, technology design, computer network design and all other trades ?...A key to solve this range of problems is in good work organization. Universal prescription does not exist, but some evergreen rules can be observed. We are going to present a scheme of work in CAAD application ALLPLAN FT v.16 with a Group manager , which starts to conquest polish market and is widely spread in Germany. “Golden rules” of ALLPLAN FT There is one database – it is placed on server. It includes all projects. There is a well-developed office standard. It must be created at the beginning of collaboration, although it is possible to improve it later. It consist of hatches, fonts, symbols, macros, materials, pen-widths, and – the most important –layers . A layer set – predefined structure divided into functional groups – e.g. drafting, text, dimensioning, architecture, HVAC, engineering, urban design, etc.That stucture is a part of an office standard – all workers use a relevant part of it. No name duplicates, no misunderstandings... If however design extends, and a new group of layers is required, it can be easily added, e.g. computer networks, fireguard systems. Administrator of ALLPLAN network defines different users and gives them different permitions of access. For example – an electrician will be able to draft on layer “electricity”, but he won’t modify anything at layer “architecture – walls”, and he won’t even see a layer “engineering- slabs”, because he doesn’t need it..At the same time our electrician will be able to see , how architect moves some walls and how HVAC moved and started to cross with his wires. Every user is able to see relevant changes, after they are saved by author. Two different users can not access at the same time the same file. That excludes inconsistent or overlapping changes . All users operate on a 3D model. While putting some data into a model, they must remember about a “Z” coordinate at work-storey. But at the same time all create a fully-integrated, synchronous database, which can be used later for bills of quantities, specifications, and – of course – for visuaisation. That method can be described as “model-centric”. To simplify complex structure of architectural object -ALLPLAN offers files. Usually one file means one storey, but at special designs it might become a functional part of a storey, or whatever you wish. Files connected with layers easy enable to separate certain structural elements, e.g. if we want to glance only at concrete slabs and columns in the building – we will turn on all files with “layer filter” – “slabs” and “columns”. ALLPLAN is of course one of possible solutions. We described it , because we use it in our workshop. It seems to be stretchy enough to face up every demand and ever-increasing complexity of current projects. The essence of the matter, however, is not a name or version of application – it is a set of features, we mentioned above, which allows to deal with EVERY project. The number of solutions is infinite.2. Increasing difficulties during design process. It may be associated with more and more installations inside of new buildings, especially some “high-tech” examples. The number of these installations increases as well as their complexity. Now buildings are full of sensors, video-screens, computer networks, safety-guard systems... Difficulties are connected with some trends in contemporary architecture, for example an organic architecture, which conceives “morphed” shapes, “moving” surfaces, “soft” solids. This direction is specially supported by modelling or CAD applications. Sometimes it is good – they allow to realize all imaginations, but often they lead to produce “unbuildable” forms, which can exist only in virtual world.Obstacles appear, when we design huge cubatures with “dense” functional scheme. Multi-purposed objects, exhibition halls, olimpic stadium at Sydney – all of them have to be stretchy, even if it requires sliding thousands pound concrete blocks! Requirements were never so high.The last reason, why designs become so complex is obvious - intensifying changes due to specific requirements of clients/developers.We could say “ signum tempori” – everything gets more and more complicated , people have to become specialists, to face up new technology. But how CAAD can help us with it? How?! We have already answered that question. Sometimes CAAD is the only way to imagine and sketch something, to visualize something, to compute a construction , to prepare a simulation... So that human must “only” interprete ready solutions. Sometimes CAAD help us to notify a problem. It works exactly in the same way, as spy-glasses does. For example – without a real-time visualization we we would have never realised (until finished!) some strange interference of solids, which have occured in the upper roof part of our new appartment-house.ConclusionsTemporary CAAD is an integral part of design process – not only as a tool, but sometimes as an inspiration. It helps to organize our work, to define problems, to filter relevant elements and to render our visions. It becomes an integral part of our senses – and that will be a real complexity in architecture...
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	7180
authors	Therakomen, Preechaya
year	2001
title	Mouse.class: Experiments for Exploring Dynamic Behaviors in Urban Places
source	University of Washington, Design Machine Group
summary	Urban space comprises not only physical forms - buildings, streets, plazas, trees, etc. – but also the people 'acting on them'. The purpose of this thesis is to increase our awareness of behavior and environment relationships, focusing on local movement at the individual level in a pedestrian environment. The thesis describes the experiment Mouse.class, as a concept demonstration model, which allows users to create a 2D-virtual environment for accommodating autonomous agents, Mouse, to explore (pedestrian) dynamic behavior in relation to (urban) space. The program uses multi-agent technology to construct an individual-based simulation in which each agent employs individual behaviors. The agents have abilities to navigate through the environment using a behavior rule set derived from a wide range of research – both theoretical and empirical approaches – on spatial behavior in small-scale urban space. These simulated individuals also have the ability to improvise their actions according to the situations they find themselves in. In the simulation, each agent reacts to the space configuration, to specific attractions in the environment, as well as to other mice. The local movement of an individual is, therefore, the result of the interaction of its visual perception, motivation, and social actions. The program then tracks each movement – path of use – revealing patterns that emerge from interactions among the components of the environment. The exploration seeks to develop a way urban designers think of 'space' as fluid processes and recognize that objects in the urban environment can have radically differing effects, depending on the circumstances and contexts in which they exist. Indeed, people are parts of the environment.
series	thesis:MSc
email
more	http://dmg.caup.washington.edu/xmlSiteEngine/browsers/stylin/publications.html
last changed	2004/06/02 19:12

For more results click below: