Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 706

Reformat results as: short short into frame detailed detailed into frame

_id	16dd
authors	Leclercq, Pierre P.
year	2001
title	Programming and Assisted Sketching. Graphic and Parametric Integration in Architectural Design
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 15-31
summary	In this paper, we present our latest research related to the concept of a sketchinterface. After describing our vision of computer assisted design and the conditions necessary for its effective implementation, an original data model is presented, which covers different levels of representation and is grounded in a database of implicit information. We then describe our software prototype, which exploits the potentials of the digital sketch, in order to demonstrate how our ideas are pertinent and the feasibility of three kinds of applications. In particular, we argue in favor of using an architectural software program in relation to the sketch within the same computer assisted environment at an early stage in the design process.
keywords	Design , Architectural Models, Implicit Knowledge Management, Sketch Interface
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	444b
authors	Barrionuevo, Luis F.
year	2001
title	Positioning of Buildings in a Land
doi	https://doi.org/10.52842/conf.ecaade.2001.493
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 493-499
summary	Configurational studies are useful tools to architectural designing, since they help to understand the grouping of objects in the space (two-dimensional and/or threedimensional). The designer, after a classification of objects that satisfies the needs set to a group of objects, impose some restrictions to the objects that will govern the composition. These restrictions are those that will define the result through operations carried out by the designer. Among these operations the location of buildings in a determined area and the particular environmental qualities condition the final result. This work presents the results obtained by means of the implementation of a computing program of the type Evolution Program (EP) implemented in language C. The implementation of the program is explained in the first part of the paper. In the second part the successive steps are described. The numerical results obtained with the mentioned program are shown graphically. Examples of different complexity level illustrate the discussion of the theoretical matters.
keywords	Positioning Buildings, Configurational Studies, Evolutionary Design, Evolutionary Algorithms, Evolutionary Programming
series	eCAADe
last changed	2022/06/07 07:54

_id	ga0104
id	ga0104
authors	Caillaud, Bernard
year	2001
title	Cellular Automata and Algorithmic Visual Creation
source	International Conference on Generative Art
summary	The cellular automaton concept, a reduced form of automaton concept (specific , in the beginning, to cybernetics and computer science) relates to the notion of local order, dear to Abraham Moles, and refers to the creation of a complex order in a set of cells ( or pixels for digital images) based on a simple law which determine the colorimetric state of each pixelaccording to the colorimetric state of its nearest neighbours. I will examine one-dimensional automata and then two-dimensional ones. I will study theirmorphogenetical properties in the case of neutral values and then of chromatic ones. I will talk about my own creative work, closely related to an "orientated morphogenesis".This latter has its place quite naturally in Generative Art . I will look at paradigmatic explorations,parametric creations, programming perturbations, conditional choices, "chromatisation" and hybridation. To finish, I will describe the last stage of the work which consists, if necessary, of reworking the initial files so as to modify then through "software creation".
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	6473
authors	Caneparo, Luca and Robiglio, Matteo
year	2001
title	Evolutionary Automata for Suburban Form Simulation
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 767-780
summary	The paper outlines a research project to develop a dynamic simulation of suburbanization processes. The approach to simulating suburban form relies on modelling different interacting processes on various scales. Two layered models are implemented, the Socio-Economic and Zoning model and the Suburban Form model, respectively by means of cellular automata and genetic programming. The Socio-Economic and Zoning model simulates exogenous factors and endogenous processes of large-scale suburban dynamics. The model approximates the area by means of a rectangular grid to the scale of hundred meters. The Suburban Form model uses a smaller grid, to the scale of meters, and is three-dimensional. The resulting dynamic, 3D, fine-scale model will create scenarios of suburban growth, allowing evaluation of their consequences on built environment and landscape.
keywords	Urban Morphology, Model Based Design Support System, Urban Design, Landscape, Genetic Programming, Cellular Automata
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	ga0123
id	ga0123
authors	Coates P., Appels, T. Simon, C. and Derix, C.
year	2001
title	Current work at CECA
source	International Conference on Generative Art
summary	The centre for environment computing and architecture continues to experiment with new ways to form, and this paper presents three recent projects from the MSc programme. The three projects all share underlying assumptions about the use of generative algorithms to constructform, using fractal decomposition, lindenmayer systems and the marching cubes algorithm respectively to construct three dimensional "architectural" objects. The data needed to drive the morphology however ranges from formal proportional systems and Genetic L systems programming through swarming systems to perceptive self organising neural nets. In all cases, the projects pose the question what is architectural form. While after Stanford Anderson (Anderson 66) we know it is simplistic to say that it is an automatic outcome of a proper definition of the brief, it is also difficult to accept that the form of a building is an entirely abstract geometrical object existing without recourse to social or contextual justification. In anattempt to resolve these issues we have turned to the study of systems and general system theory as a way of understanding the mechanics of emergence and morphogenesis generally, and the
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	d1a6
authors	Corona Martínez, A., Vigo, L. and Folchi, A.
year	2001
title	SEMINARIO/TALLER DE INVESTIGACION PROYECTUAL ESTRUCTURA DE TALLER ACTIVO PARA LA ENSEÑANZA E INVESTIGACIÓN PROYECTUAL ARQUITECTÓNICA ASISTIDO POR TÉCNOLOGÍAS DIGITALES (Research Seminar/Workshop on the Structure of Active Design Studios for Training and Research on Computer Aided Design)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 227-228
summary	In a previous paper (SiGradi 2000) we presented a design approach based upon the architectural research that regarded digital technologies as a subordinated tool to architectural design. From that starting point and from various research experiences, we have re-oriented certain guidelines and latter developed specific techniques that can be used both for teaching and for the professional practice of architecture. Through the use of paradigmatic and hermeneutic techniques developed ad hoc, architectural projects are developed in a three-stage sequence: a) development of a narrative framework; b) analysis based on object oriented programming thechniques; and c) digital development of the preliminary design. We believe that the positive aspects of the inclusion of these idea-centered techniques to the digital realm unifies and extends the architectural knowledge and strengthens its conception.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	158e
authors	De Vries, B., Van Leeuwen, J. and Achten, H. (Eds.)
year	2001
title	Computer Aided Architectural Design Futures 2001
source	Proceedings of the Ninth International Conference [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, 814 p.
summary	CAAD Futures is a bi-annual conference that aims to promote the advancement of computer-aided architectural design in the service of those concerned with the quality of the built environment. The conferences are organized under the auspices of the CAAD Futures Foundation, which has its secretariat at the Eindhoven University of Technology in the Netherlands. This volume provides state-of-the-art articles in the following areas: capturing design, information modelling, CBR techniques, Virtual Reality, CAAD education, (hyper) media, design evaluation, design systems development, collaboration, generation, design representation, knowledge management, form programming, simulation, architectural analysis, and urban design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/2001
last changed	2003/04/02 10:52

_id	2f44
authors	Diaz, Monica
year	2001
title	Aplicación del vba en el diseño arquitectónico: diseño de paredes tomando en cuenta el aislamiento acústico aéreo [Application of the Vba in an Architectural Design Case: Walls Design with the Aerial Sound Insulation]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 216-227
summary	Development an application using an object and events language as VBA can reduce the time to programming because it is more intuitive and you can have libraries with procedures. This type of application makes easier to work on the architecture design: it provides information to the architect and guide him in taking the best decision. The time of designing walls considering the acoustical isolation were reduced using a VBA application. The purpose of the present work is to develop an automatic, visual and interactive tool that using a 3D drawing CAD and a object language guide the architect in the design of walls considering the noise from outside and helping the acoustical comfort.
series	other
email
last changed	2003/02/14 08:29

_id	d960
authors	Ekholm, Anders
year	2001
title	Activity objects in CAD-programs for building design. A prototype program implementation
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 61-74
summary	In the early stages of the building design process, during the programming and the proposal stages, both user activities and the building are in focus for the designer. In spite of this, today’s CAD programs give no support for management of information about user activities in the building. This paper discusses the requirements on modelling user activities in the context of building design and presents a prototype software. The prototype is developed as an add-on to the architectural design software ArchiCAD.
keywords	CAD, User Activity Modelling, Building Design, Building Product Modelling, Building Brief Development, Space Function Program
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	8805
authors	Flemming, U., Erhan, H.I. and Ozkaya, I.
year	2001
title	Object-Oriented Application Development in CAD
source	Technical Report 48-01-01. Pittsburgh, PA: Carnegie Mellon University, Institute of Complex Engineered Systems
summary	This report describes a graduate interdisciplinary course offered to students in the graduate program of the School of Architecture at Carnegie Mellon and related departments in fall 2000. The motivation was the realization that when commercial CAD (Computer-Aided Design) systems recently switched from procedural application programming languages to object-oriented ones, third-party application must undergo a significant cognitive retooling"; i. e. they must know more than the syntax and semantics of the new programming language to be used and must be able to employ appropriate software development strategies that are appropriate for the new paradigm. especially with respect to the importance of modeling, a distinguishing characteristic of object-oriented programming. The goal of the course was (a) to introduce and test strategies of object-oriented application development in general and in the context of MicroStation, a state-of-the-art commercial CAD package; (b) to develop-as a course team project-an interesting application that gives students practice with these strategies and team work; and (c) to document our approach and findings so that others can learn from them. The strategies introduced were the use-case approach of Jacobson et al. and the complementary object-modeling tools of Rumbaugh that were recently integrated into the Unified Modeling Language UML. The software platform supporting the course comprised MicroStation, JMDL (a superset of Java) and ProjectBank on the CAD side and RationalRose on the modeling side. The application developed by students in the course supports the generation of drawings for remodeling projects from a set of dgn files describing the existing state of the building to be remodeled. The course was supported by a grant and in-kind contributions from Bentley with matching funds from the Pennsylvania Infrastructure Technology Alliance (PITA)."
series	report
email
last changed	2003/04/23 15:50

_id	6fdc
authors	Gross, Mark D.
year	2001
title	FormWriter. A Little Programming Language for Generating Three-Dimensional Form Algorithmically
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 577-588
summary	FormWriter is a simple and powerful programming language for generating three-dimensional geometry, intended for architectural designers with little programming experience to be able to generate three dimensional forms algorithmically without writing complex code. FormWriter’s main features include a unified coding and graphics environment providing immediate feedback and a “flying turtle” - a means of generating three dimensional data through differential geometry.
keywords	Programming Language, Geometry, Form Generation
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	5d19
authors	Gómez Arvelo, Susana Carolina
year	2001
title	Simulador de proyecciones de sombras sobre modelos computarizados en 3d. Herramienta para evaluar la eficiencia de modelos de proteccion solar. [Shade simulator On 3D Computer Models. A Tool to Evaluate the Efficiency of Models for Solar Protection]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 156-165
summary	A Program of Graphic Computing, developed in the Language of Programming AUTOLISP and run in AUTOCAD 2000, which is guided toward the Investigation in Bioclimatic Architecture, is presented. Before a model of solar protection in 3D, and loading the input data of the geographical localization and orientation, time and evaluation date (chosen by the user), the program calculates and projects the simulation of the corresponding shade contours on every plane that constitutes the 3D pattern (openings, walls, protections, floor...). In this research different areas of knowledge concur: Plane and spherical trigonometry applied to the solar ray and to the Bioclimatic Architecture, space geometry, plane graphical representation of three-dimensional objects, a concept of the transformation of vision for the three-dimensional representation of the objects in computers, and modern programming techniques.
keywords	Bioclimatic Architecture; Heat Gaining Control; 3D Shades Simulator; Solar Protection
series	other
email
last changed	2003/02/14 08:29

_id	8652
authors	Han, Seung-Hoon and Turner, James A.
year	2001
title	An Architectural Approach to Virtual Reality Support of Multi-user Environments
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 439-452
summary	The Internet and its multimedia component, the World Wide Web (WWW), are the essential technological foundations, and the tools to construct cyberspace on these foundations are beginning to be created. Two of those tools are the network programming language, Java, and the 3D graphics standard for the Internet, the Virtual Reality Modelling Language (VRML) which has the ability to support programmable behavior. This paper documents at experiment with the use of networks with Java-VRML connectivity, applying it to a collaborative system which will make it possible for multiple users to navigate and dynamically update an architectural VR environment.
keywords	Collaborative Design, Distributed Virtual Environments, Multi-User, Internet
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	avocaad_2001_08
id	avocaad_2001_08
authors	Ivanka Iordanova, Temy Tidafi
year	2001
title	Design assistance by complexity-supporting precedents' modelling
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design processes imply complexity at every stage of the development of a project. On one hand, this complexity is rarely taken into consideration by the currently used CAD programs. On the other hand, recent theoretical researches indicate that a large proportion of architectural design processes are based on precedents as a source of inspiration or as a basis for reflection. A precedent is usually seen as a sketch, as a picture, as a drawing or as a visual memory of an architectural object or space. Recent research enlarges this concept into at least two directions: (1) precedents are looked for not only in the architectural space, and (2) it’s not only the visual aspect of a precedent that is important, but also its internal logic and structure, the know-how associated to it, and the actions needed for its creation. Usually, architectural design knowledge is implicitly presented by precedents. This design knowledge is applied to design-objects having various levels of generality, at different states of detailing and expected to be dynamically transformed during the following stages of design. Having in mind these characteristics of precedents called for during the architectural design process, we propose to join their visual representation with a description of their most important characteristics: structural organisation, way of production, functional organisation, spatial composition, etc. These can be either described or modelled by the original author, or interpreted by the precedent’s ‘user’. These design-knowledge models can be of use in several ways: (1) providing a library for search of precedents by semantic analogy, (2) offering ready-to-use capsules of design knowledge for new design situations, (3) enriching the ‘design world’ of the user-architect. We have implemented the proposed method of complexity-supporting precedents’ modelling by the means of the functional programming SGDL-Scheme language. The models (a programming function or a structure of programming functions) describe the actions necessary for the creation of an object (or its digital representation) and the structural organisation between the models in order to generate new, more complex ones. The concept of describing actions instead of shapes, provides a multi-level applicability of the models. Visual presentations (digital maquettes, images or animations) of newly generated objects can be stored in a visual-library of the assistant, thus creating a new ‘precedent’ that can be referred to in future by visual analogy. The design-knowledge that has generated the new object, is stored and linked to the image. Thus, the visual stimulus of a precedent can be joined with functional characteristics, production procedures and/or semantic meaning of the object. The paper will present the ‘engine’ of the proposed assistant, its organisation, as well as digital models of precedents that have served as a basis for the design of new architectural objects or structures. The assistant is conceived as an open, complexity supporting structure that can be further developed by the ‘user-architect’. We will discuss the advantages and limitations of the proposed assistant.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	caadria2006_613
id	caadria2006_613
authors	JAEHO RYU, NAOKI HASHIMOTO, MAKOTO SATO, MASASHI SOEDA, RYUZO OHNO
year	2006
title	A GAME ENGINE BASED ARCHITECTURAL SIMULATOR ON MULTI-PROJECTOR DISPLAYS
doi	https://doi.org/10.52842/conf.caadria.2006.x.m1v
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 613-615
summary	To make whole one image on screens that is generated by many computers and synchronization among computers, there is a need for a network software environment for multi-projector display system. Although the development costs increase for parallel programming for multi-projector display system, there is a possibility that the program cannot be executed at an enough speed since the network bandwidth might become a bottleneck. There are some software environments for that kind of multi-projector display system like Chromium that is latest version of WireGL (Humphreys, 2001&2002). WireGL is a kind of Client-Server Model, which one rendering server sends the data of rendering to many computers. While it can use the application without modification of source, it requires heavy network traffics. The other type of operating software is VR Juggler (Cruz-Neira, 2002), and CAVE Library that is a kind of Master-Slave Model. In the Master-Slave Model, every computer has same application programs to render the image that only keep the synchronization of rendering and events. But, these programs require a specialized skill and knowledge to modify the source of program for the certain rendering PC-Cluster system.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	acadia11_372
id	acadia11_372
authors	James, Anne; Nagasaka, Dai
year	2011
title	Integrative Design Strategies for Multimedia in Architecture
doi	https://doi.org/10.52842/conf.acadia.2011.372
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 372-379
summary	Multidisciplinary efforts that have shaped the current integration of multimedia into architectural spaces have primarily been conducted by collaborative efforts among art, engineering, interaction design, informatics and software programming. These collaborations have focused on the complexities of designing for applications of multimedia in specific real world contexts. Outside a small but growing number of researchers and practitioners, architects have been largely absent from these efforts. This has resulted in projects that deal primarily with developing technologies augmenting existing architectural environments. (Greenfield and Shepard 2007)This paper examines the potential of multimedia and architecture integration to create new possibilities for architectural space. Established practices of constructing architecture suggest creating space by conventional architectural means. On the other hand, multimedia influences and their effect on the tectonics, topos and typos (Frampton 2001) of an architectural space (‘multimedia effects matrix’) suggest new modes of shaping space. It is proposed that correlations exist between those two that could inform unified design strategies. Case study analyses were conducted examining five works of interactive spaces and multimedia installation artworks, selected from an initial larger study of 25 works. Each case study investigated the means of shaping space employed, according to both conventional architectural practices and the principles of multimedia influence (in reference to the ‘multimedia effects matrix’) (James and Nagasaka 2010, 278-285). Findings from the case studies suggest strong correlations between the two approaches to spatial construction. To indicate these correlations, this paper presents five speculative integrative design strategies derived from the case studies, intended to inform future architectural design practice.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	3c96
authors	Kang, H., Anderson, S.D. and Clayton, M.J.
year	2001
title	Web4D: Challenges and Practices for Construction Scheduling
doi	https://doi.org/10.52842/conf.acadia.2001.132
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 132-141
summary	Research has demonstrated that four-dimensional computer aided design (4D CAD), in which a three-dimensional (3D) CAD model is animated through time, is useful in helping professionals understand the construction schedule. However, cumbersome processes to update a 4D CAD model, which involve changing geometry representations, changing schedules and bar charts, linking the geometry to the scheduling information, and generating animations, may discourage professionals from using 4D CAD in actual construction projects. A software prototype implementing 4D CAD in a Web environment overcomes limitations of current 4D CAD tools. This software permits editing of the construction schedule over the Internet and shows the revised construction sequence visually on a Web browser using 3D computer graphics. This software is composed of a database on a server, Active Server Pages (ASP) scripts, and a Java applet that was developed using Java 3D Application Programming Interface (API) and Java JDBC. The Java applet retrieves the 4D model at the appropriate level of completion over the Internet and allows users to navigate around the model on the Web browser. Web4D visualization software can help professionals to expedite the schedule updating process by involving designers and constructors in collaborative decision- making.
keywords	Web4D, 4D CAD, 4D Visualization, Construction Schedule, Internet
series	ACADIA
email
last changed	2022/06/07 07:52

_id	5b93
authors	Kavakli, Manolya
year	2001
title	NoDes: kNOwledge-based modeling for detailed DESign process - from analysis to implementation
source	Automation in Construction 10 (4) (2001) pp. 399-416
summary	This paper reviews the nature of detailed design process and discusses the implementation of a knowledge-based system (KBS) founded on a protocol analysis study. The main objective is to discuss the features of a knowledge-based modeling approach, kNOwledge-based modeling for detailed DESign process (NoDes). This approach was first used for the development of the , which is an interactive KBS for the synthesis of window parts. We take the as an exemplary prototype implementation to demonstrate the abilities and performance of our knowledge-based modeling approach. Besides knowledge analysis and simulation of task execution, this paper also argues the efficiency of the object-oriented programming approach in the system implementation.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

For more results click below: