Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 689

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_06
id	avocaad_2001_06
authors	Giovanni De Paoli
year	2001
title	Architectural design and procedural models - A radical change of language to design in architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The history of architecture and its teaching clearly reveal how representations of the image and drawing have changed over centuries. Today, computers are increasingly found at the desks of architecture professionals and students, but their usage remains restricted to technical functions and what is commonly known as CAD (computer-assisted design), in architecture is often simply the other CAD (computer-assisted drawing).This presentation deals with architectural design, particularly at its earliest stage. Our objective is to propose a model for describing the architectural concept that meets the needs of architects through software. Only then will they really be able to use computers as an aid to design by overcoming the obstacles that presently keep us from making full use of them.This has led me to propose an avenue of exploration that examines projection through an object’s properties, and a method of computer-assisted design that makes use of procedural models. These procedural models consist of geometric operators and operators that define the properties, characteristics and performance of a building — operators which I have termed “semantic”.This research fits into a paradigm that leads to representation of the building through functions that can be called with parameters and encapsuled in an algorithm, making it possible to create procedural models that assist with the design. This approach opens up a means of integrating the logos with the figurative representation where drawing is used instead of words to convey the architectural concept.The example of a procedural model shows how we can use a generic model to produce a volume model with all the characteristics belonging to the same family of objects. This type of model can serve not only to illustrate the result of a process, or to draw connections among buildings on the basis of their construction process, or to test the validity of a rule typical of a set of objects, but also to integrate, through a functional language, semantic operators which to date have been excluded from the initial design phase. This descriptive mechanism is extremely powerful in making it possible to establish relationships among the functions and properties of a building and the purpose of the architectural project.The scientific contribution of this research is to test the hypothesis that we can use computer tools to manipulate operators which enable the architect to reappropriate a complex design of the building, and open up new lines of investigation into integrating geometric and knowledge-based systems into a unified representation. The declarative approach for creating three-dimensional scenes fits into this perspective.It is now a matter of exploring the possibility of working on a “common morphology” shared by everyone involved in the design process by rewriting the functions or by converting the functions used for representation, or else through a functional dialect (language) that allows for dialectic relationships among all types of operators and the actions of the protagonists in the architectural design process.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_08
id	avocaad_2001_08
authors	Ivanka Iordanova, Temy Tidafi
year	2001
title	Design assistance by complexity-supporting precedents' modelling
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design processes imply complexity at every stage of the development of a project. On one hand, this complexity is rarely taken into consideration by the currently used CAD programs. On the other hand, recent theoretical researches indicate that a large proportion of architectural design processes are based on precedents as a source of inspiration or as a basis for reflection. A precedent is usually seen as a sketch, as a picture, as a drawing or as a visual memory of an architectural object or space. Recent research enlarges this concept into at least two directions: (1) precedents are looked for not only in the architectural space, and (2) it’s not only the visual aspect of a precedent that is important, but also its internal logic and structure, the know-how associated to it, and the actions needed for its creation. Usually, architectural design knowledge is implicitly presented by precedents. This design knowledge is applied to design-objects having various levels of generality, at different states of detailing and expected to be dynamically transformed during the following stages of design. Having in mind these characteristics of precedents called for during the architectural design process, we propose to join their visual representation with a description of their most important characteristics: structural organisation, way of production, functional organisation, spatial composition, etc. These can be either described or modelled by the original author, or interpreted by the precedent’s ‘user’. These design-knowledge models can be of use in several ways: (1) providing a library for search of precedents by semantic analogy, (2) offering ready-to-use capsules of design knowledge for new design situations, (3) enriching the ‘design world’ of the user-architect. We have implemented the proposed method of complexity-supporting precedents’ modelling by the means of the functional programming SGDL-Scheme language. The models (a programming function or a structure of programming functions) describe the actions necessary for the creation of an object (or its digital representation) and the structural organisation between the models in order to generate new, more complex ones. The concept of describing actions instead of shapes, provides a multi-level applicability of the models. Visual presentations (digital maquettes, images or animations) of newly generated objects can be stored in a visual-library of the assistant, thus creating a new ‘precedent’ that can be referred to in future by visual analogy. The design-knowledge that has generated the new object, is stored and linked to the image. Thus, the visual stimulus of a precedent can be joined with functional characteristics, production procedures and/or semantic meaning of the object. The paper will present the ‘engine’ of the proposed assistant, its organisation, as well as digital models of precedents that have served as a basis for the design of new architectural objects or structures. The assistant is conceived as an open, complexity supporting structure that can be further developed by the ‘user-architect’. We will discuss the advantages and limitations of the proposed assistant.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_21
id	avocaad_2001_21
authors	Martijn Stellingwerff
year	2001
title	Visual Cues in the CYBER-REAL Complex
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Current Computer Aided Architectural Design deals with issues of complexity in creation and interpretation of the built environment, complexity of the computer systems and complexity of the representations of the design object. The term ‘CYBER-REAL Complex’ in this paper is defined as the whole (un)conscious state of the architectural design project in the heads of the design-group and as how it is maintained in CAAD systems. The ‘CYBER-REAL Complex’ contains the design, its context and all related information such as planning, product specifications and design ideas. An Intranet is an interesting means for storage and approach of such complex project-data. However the knowledge and data of the project participants remains in their heads and new methods have to be developed in order to get each participant to share his or her personal information about the project. Meetings and intense data retrieval by an Intranet can establish a useful ‘CYBER-REAL Complex’. Then, as a designer wants to approach and change the information in the ‘CYBER-REAL Complex’, a very good set of tools, methods and media has to be at hand. The complexity of all the information can be overwhelming and it can take much effort to re-understand and re-interpret the information before new decisions and design-steps can be made. Currently, the understanding of CAAD representations by the designer and the deliberate execution of operations on increasingly complex datasets through increasingly complex user interfaces takes too much time and effort. An enhanced way of representation in the ‘CYBER-REAL Complex’ could help the approach and understanding of the information. Therefore the visual language of information systems needs further research and development. This paper explores several limits of human perception and ways to adhere to the human way of visual thinking in order to find and add new visual cues in CAAD, VR interfaces and in the ‘CYBER-REAL Complex’ as a whole. Successively the perceptive aspects of complex information, the role of visual cues in complex information and several examples of visual cues in research tests are presented. The paper draws from knowledge of the Gestalt Theory, Perception Research and findings of a PhD research project about Visual Language for Context Related Architectural Design. Findings of this research show that designers use distinct views to get overview and insight in the project data and that different kinds of data representation are needed for different phases in the design process. Finally it showed that abstract represented and filtered information can be very useful for remaining focus in the otherwise overwhelming dataset.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	80f7
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2001
title	Knowledge-based System to Support Architectural Design - Intelligent objects, project net-constraints, collaborative work
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 80-85
doi	https://doi.org/10.52842/conf.ecaade.2001.080
summary	The architectural design business is marked by a progressive increase in operators all cooperating towards the realization of building structures and complex infrastructures (Jenckes, 1997). This type of design implies the simultaneous activity of specialists in different fields, often working a considerable distance apart, on increasingly distributed design studies. Collaborative Architectural Design comprises a vast field of studies that embraces also these sectors and problems. To mention but a few: communication among operators in the building and design sector; design process system logic architecture; conceptual structure of the building organism; building component representation; conflict identification and management; sharing of knowledge; and also, user interface; global evaluation of solutions adopted; IT definition of objects; inter-object communication (in the IT sense). The point of view of the research is that of the designers of the architectural artefact (Simon, 1996); its focus consists of the relations among the various design operators and among the latter and the information exchanged: the Building Objects. Its primary research goal is thus the conceptual structure of the building organism for the purpose of managing conflicts and developing possible methods of resolving them.
keywords	Keywords. Collaborative Design, Architectural And Building Knowledge, Distributed Knowledge Bases, Information Management, Multidisciplinarity
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ddss2004_ra-177
id	ddss2004_ra-177
authors	Ballas, D., R. Kingston, and J. Stillwell
year	2004
title	Using a Spatial Microsimulation Decision Support System for Policy Scenario Analysis
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 177-191
summary	This paper discusses the potential of a spatial microsimulation-based decision support system for policy analysis. The system can be used to describe current conditions and issues in neighbourhoods, predict future trends in the composition and health of neighbourhoods and conduct modelling and predictive analysis to measure the likely impact of policy interventions at the local level. A large dynamic spatial micro-simulation model is being constructed for the population of Leeds (approximately 715,000 individuals) based on spatial microsimulation techniques in conjunction with a range of data, including 2001 Census data for Output Areas and sample data from the British Household Panel Survey. The project has three main aims as follows: (i) to develop a static microsimulation model to describe current conditions in Leeds; (ii) to enable the performance of ‘What if?’ analysis on a range of policy scenarios; and (iii) to develop a dynamic microsimulation model to predict future conditions in Leeds under different policy scenarios. The paper reports progress in meeting the above aims and outlines the associated difficulties and data issues. One of the significant advantages of the spatial microsimulation approach adopted by this project is that it enables the user to query any combination of variables that is deemed desirable for policy analysis. The paper will illustrate the software tool being developed in the context of this project that is capable of carrying out queries of this type and of mapping their results. The decision support tool is being developed to support policy-makers concerned with urban regeneration and neighbourhood renewal.
keywords	Spatial Microsimulation, Spatial Decision Support Systems, Geotools
series	DDSS
last changed	2004/07/03 22:13

_id	8805
authors	Flemming, U., Erhan, H.I. and Ozkaya, I.
year	2001
title	Object-Oriented Application Development in CAD
source	Technical Report 48-01-01. Pittsburgh, PA: Carnegie Mellon University, Institute of Complex Engineered Systems
summary	This report describes a graduate interdisciplinary course offered to students in the graduate program of the School of Architecture at Carnegie Mellon and related departments in fall 2000. The motivation was the realization that when commercial CAD (Computer-Aided Design) systems recently switched from procedural application programming languages to object-oriented ones, third-party application must undergo a significant cognitive retooling"; i. e. they must know more than the syntax and semantics of the new programming language to be used and must be able to employ appropriate software development strategies that are appropriate for the new paradigm. especially with respect to the importance of modeling, a distinguishing characteristic of object-oriented programming. The goal of the course was (a) to introduce and test strategies of object-oriented application development in general and in the context of MicroStation, a state-of-the-art commercial CAD package; (b) to develop-as a course team project-an interesting application that gives students practice with these strategies and team work; and (c) to document our approach and findings so that others can learn from them. The strategies introduced were the use-case approach of Jacobson et al. and the complementary object-modeling tools of Rumbaugh that were recently integrated into the Unified Modeling Language UML. The software platform supporting the course comprised MicroStation, JMDL (a superset of Java) and ProjectBank on the CAD side and RationalRose on the modeling side. The application developed by students in the course supports the generation of drawings for remodeling projects from a set of dgn files describing the existing state of the building to be remodeled. The course was supported by a grant and in-kind contributions from Bentley with matching funds from the Pennsylvania Infrastructure Technology Alliance (PITA)."
series	report
email
last changed	2003/04/23 15:50

_id	5d19
authors	Gómez Arvelo, Susana Carolina
year	2001
title	Simulador de proyecciones de sombras sobre modelos computarizados en 3d. Herramienta para evaluar la eficiencia de modelos de proteccion solar. [Shade simulator On 3D Computer Models. A Tool to Evaluate the Efficiency of Models for Solar Protection]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 156-165
summary	A Program of Graphic Computing, developed in the Language of Programming AUTOLISP and run in AUTOCAD 2000, which is guided toward the Investigation in Bioclimatic Architecture, is presented. Before a model of solar protection in 3D, and loading the input data of the geographical localization and orientation, time and evaluation date (chosen by the user), the program calculates and projects the simulation of the corresponding shade contours on every plane that constitutes the 3D pattern (openings, walls, protections, floor...). In this research different areas of knowledge concur: Plane and spherical trigonometry applied to the solar ray and to the Bioclimatic Architecture, space geometry, plane graphical representation of three-dimensional objects, a concept of the transformation of vision for the three-dimensional representation of the objects in computers, and modern programming techniques.
keywords	Bioclimatic Architecture; Heat Gaining Control; 3D Shades Simulator; Solar Protection
series	other
email
last changed	2003/02/14 08:29

_id	cf2011_p163
id	cf2011_p163
authors	Park, Hyoung-June
year	2011
title	Mass-Customization in the Design of 4,000 Bus Stops
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 265-278.
summary	In Hawaii, ‚"TheBus‚" has been a main transportation system since 1971. Considering the high cost of living in Hawaii and the absence of a rail system, the use of ‚"TheBus‚" has been an instrumental vein of the city life in Honolulu with rhythmical pauses at about 4,000 bus stops in Honolulu. However, existing undifferentiated bus stops are developed from a cost effective mass production system so that they have been problematic for satisfying specific needs from various site conditions. In this research, an integrated computational method of mass-customization for designing 4,000 bus stops is introduced. According to various site conditions, the design of each bus stop is customized. Unlike the mass‚Äêproduced bus stops commonly seen in cities today, the proposed computational method in this paper produces bus stop design outcomes that fit into the physical characteristics of the location in which they are installed. Mass-customization allows for the creation and production of unique or similar buildings and building components, differentiated through digitally‚Äêcontrolled variation (Kolarevic, 2003). The employment of a computational mass‚Äêcustomization in architectural design extends the boundary of design solutions to the satisfaction of multi-objective requirements and unlimited freedom to search alternative solutions (Duarte, 2001; Caldas, 2006). The computational method developed in this paper consists of 1) definition of a prototype, 2) parametric variation, 3) manual deformation, and 4) simulation based deformation. The definition of a prototype is the development of a basic design to be transformed for satisfying various conditions given from a site. In this paper, the bus stop prototype is developed from the analysis of more than 300 bus stops and the categorization of the existing bus stops according to their physical conditions, contextual conditions, climatic conditions, and existing amenities. Based upon the outcome of the analysis, the design variables of a bus stop prototype are defined. Those design variables then guide the basic physical parameters for changing the physical configuration of the prototype according to a given site. From this, many possible design outcomes are generated as instances for further developments. The process of manual deformation is where the designer employs its intuition to develop the selected parametric variation. The designer is compelled to think about the possible implication derived from formal variation. This optional process allows every design decision to have a creative solution from an individual designer with an incidental quality in aesthetics, but substantiated functional quality. Finally the deformation of the selection is guided and controlled by the influence of sun direction/ exposure to the selection. The simulation based deformation starts with the movement of the sun as the trigger for generating the variations of the bus stop prototype. The implementation of the computational method was made within the combination of MEL (Maya Enbedded Language), autodesk MAYA and Ecotect environment.
keywords	mass-customization, parametric variation, simulation based deformation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	4eb5
authors	Stellingwerff, Martijn and Verbeke, Johan (Eds.)
year	2001
title	ACCOLADE - Architecture, Collaboration, Design
source	Delft University Press (DUP Science) / ISBN 90-407-2216-1Ý/ The Netherlands, 202 p. [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	This book is the outcome of the Euro-Workshop {ACCOLADE} which took place from 28th of August till 1st of September 2000. The Euro-Workshop was funded by the European Commission through the Fifth Framework of Research. Young and senior researchers worked together on the theme of Architectural Collaborative Design. The set of traditional papers is supplemented by a report on the brainstorm and working sessions which produced a lot of materials for future research directions. They are summarized in a research agenda. The global scheme gives a structure for the different sub-themes ranging from communication language, communication behaviour, communication environment, goals and roles and education. The combination of technical reflections and human aspects makes this book a unique position in the field of collaborative design. The name {ACCOLADE} is an acronym for Architectural Collaborative Design. The association of this name is positive because the accolade sign brings a number of different words together in a group. E.g. {England, Belgium, the Netherlands, Italy, ...}. The meaning of the word in English is 'a mark of honour' and the French meaning of the word is a 'solemn embrace'. It also refers to the multi-disciplinary design process. These connotations can be useful for a collaboration project in which many different people and parties plan to make a joint design effort.
series	other
email
last changed	2001/09/14 21:30

_id	d911
authors	Verbeke, Johan and Stellingwerff, Martijn
year	2001
title	A Future Focus on Collaborative Design
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 98-103
doi	https://doi.org/10.52842/conf.ecaade.2001.098
summary	In this paper, we will report on the experiences and insights discussed during a workshop of the Special Interest Group on Collaborative Architectural Design. Participants from 12 universities and four firms (for architecture, engineering, consultancy and software) brainstormed and discussed on multidisciplinary simultaneous collaborative design and exchanged their ideas on the subject. The effort of the diverse participants covered theoretical, social and technical issues of collaborative architectural design. The topic of the workshop was explored by means of paper presentations, software tests, experiments, different types of brainstorm sessions and the formulation of future scenarios. The combination of junior and senior researchers of each university proved to be fruitful and inspiring for the discussions. As an outcome of these activities a framework for future research in the field will be presented. Special focus will be on the aspects of communication language, communication behavior, communication environment, goals and roles in the context of collaborative design. The name {ACCOLADE} is an acronym of Architectural Collaborative Design. The name brings a number of different words together in a group. E.g. {England, Belgium, the Netherlands, Italy, ...}. The meaning of the word in English is ‘a mark of honour’ and the French meaning of the word is a ‘solemn embrace’. It also refers to the multi-disciplinary design process. These connotations can be useful for a collaboration project in which many different people and parties plan to make a joint design effort.
keywords	Architecture, Collaboration, Design
series	eCAADe
email
last changed	2022/06/07 07:58

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	7eb9
authors	Dokonal, Wolfgang and Martens, Bob
year	2001
title	A Working Session on 3-D City Modeling
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 417-422
doi	https://doi.org/10.52842/conf.ecaade.2001.417
summary	On the occasion of a presentation on a city model for Graz at the eCAADe-conference in Weimar (2000), some attendees informed us about their previous work in this field and the idea of preparing a working session with collegues involved in 3-D city modeling was born. During the initial phase of research for this eCAADe conference activity it turned out that a large number of city models has been created in the course of time for different reasons resp. purposes. Therefore a rich variety in the production of city models can be noticed. This working session on 3-D city modeling brings together experts focusing on different aspects concerning the creation and use of city models, such as data input, data structure, data storage and data quality. Also the definition of a perspective on the future of 3-D city modeling can be regarded as an important topic. In this paper a rough overview on the different submissions will be presented. Furthermore three blitz statements are incorporated as time was too short to produce a full paper. Both with the individual contributions as with this overview paper it is intended to present a knowledge-base to this working field. Finally, the start for a growing bibliography was made in order to support future work in this area.
keywords	Urban Modeling, 3-D Modeling, Collaboration, City Information, Model Adaptation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	5166
authors	Sass, Larry
year	2001
title	Reconstructing Palladio’s Villas: A computational analysis of Palladio’s villa design and construction process
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 212-226
doi	https://doi.org/10.52842/conf.acadia.2001.212
summary	This project is ongoing research focused on finding a method of reconstruction, using computational devices to build, represent and evaluate Palladio’s un-built villas in three-dimensions. The first of The Four Books of Architecture contains text and images explaining Palladio’s design and construction systems in the form of rules. These rules were written for masons and craftsmen of the 16th century, offering one and two-dimensional data on each of Palladio’s villas, palaces and churches. The Four Books offers a general treatment of the villas; however, it is missing most of the physical construction data needed to execute a full reconstruction of an un-built building. Many architects and historians have attempted to reconstruct Palladio’s work in drawings, wooden models and computer imagery. This project presents a new method of reconstruction through the definition of construction rules, in addition to shape and proportional rules defined by previous scholars. In also uses 3D printing and texture mapped renderings as design tools. This study uses the Villa Trissino in Meledo as a test case for the process. The end product is a presentation of a method for reconstruction in the form of a three-dimensional analysis of Palladio’s design and construction rules. The goal is to recreate all 24 of the villas found in the Four Books with the same method and rules as a demonstration of qualitative and quantitative input and output from a computational device.
keywords	Palladio, Computer Modeling, 3D Printing, Computer Rendering
series	ACADIA
email
last changed	2022/06/07 07:57

_id	ddss2004_d-77
id	ddss2004_d-77
authors	Tangari, L., M. Ottomanelli, and D. Sassanelli
year	2004
title	The Project Planning of Urban Decongestion
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 77-92
summary	This study introduces a methodology for the evaluation, among a set of possible plans and/or policies, of a transport system which could reduce the effects of the network congestion on an urban area. Hence it is proposed a procedure which contains a new element compared with the current methodologies that is the final user’s evaluation of the examined system by turning to the application of the contingent valuation method, a technique like stated preferences. The approach we propose is based on the necessity for a determination of an optimal solution to the urban congestion to be established on the politic acceptability by the final user. Solutions which result virtually feasible for a public administration both on a technique and economic point of view often meet hostility by individuals. Consequently, it would be interesting for policy makers to adopt a process of valuation which could let to understand the user’s sensitivity and hostility towards specific configurations of the system, chosen as solution to decongestion (traffic calming, roadpricing, auto-free zones) and consequently to make less unpleasant the strategy to be carried out to control congestion (Harrington et al., 2001). In this way, a user does not judge the implementation of a set of projects made by a decision-maker as imposition and he is willing to pay in order to fulfil the chosen scenario. Finally we describe an application of the proposed methodology relating the definition of the integrated transport system in the metropolitan area of Bari, chief town of Apulia.
keywords	Contingent Valuation, Transportation Planning, Urban Decongestion
series	DDSS
last changed	2004/07/03 22:13

_id	cb8e
authors	Vegte, W.F. van der, Pulles, J.P.W. and Vergeest, J.S.M.
year	2001
title	Towards computer-supported inclusion and integration of life cycle processes in product conceptualization based on the process tree
source	Automation in Construction 10 (6) (2001) pp. 731-740
summary	Development of computer support in design is showing several shifts in focus over the latest decades. This paper relates to the shifts from detail design to conceptualization, from artifact geometry definition only to the inclusion of process knowledge, and from isolated aspects to integrated aspects. It discusses a possible solution for simultaneous consideration of life cycle process aspects during conceptual design using the process tree representation. Integrating process aspects can be considered a preparation for an integrated representation of artifact and process aspects to be used in a front–end environment for conventional CAD detailing systems
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	db60
authors	Af Klercker, J., Achten, H. and Verbeke, J.
year	2001
title	AVOCAAD - A First Step Towards Distance Learning?
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 269-274
doi	https://doi.org/10.52842/conf.ecaade.2001.269
summary	In the industrial world knowledge is developed very fast. As most countries are depending on employees with a high level of knowledge and skills the term ”Life Long Learning” has been formulated and the concept is more and more accepted. Institutions of higher education are more and more involved in creating supplementary education more independent of time and place. Distance learning was originally carried out by ordinary mail, which was slow but might then have been the only solution for people in remote places. With the Internet and e-mail the distance-learning concept has got a far better tool, for instance better interaction facilities. Architects and engineers in practise are deeply involved in solving the problems of the present projects. Education which is independent of time and place must be of great interest to both parties. The AVOCAAD project has created an education model for students to meet the possibilities of CAAD. The education model can be used in a curriculum at a school as well as for distance learning. Among the possible experiences from it, the one concerning distance learning might be the most important future application of the system in architectural education. This paper sketches the pedagogical background and gives examples from other areas of knowledge, where distance learning is already in use. We will put the question how the AVOCAAD concept meets the experiences from distance learning.
keywords	Distance Learning, Pedagogic, CAAD, E-Learning, AVOCAAD
series	eCAADe
email
last changed	2022/06/07 07:54

_id	3e51
authors	Cerulli, C., Peng, C. and Lawson, B.
year	2001
title	Capturing Histories of Design Processes for Collaborative Building Design Development. Field Trial of the ADS Prototype
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 427-437
summary	The ADS Project - Advanced Design Support for the Construction Design Process - builds on the technological results of the previous COMMIT Project to exploit and demonstrate the benefits of a CAD based Design Decision Support System. COMMIT provides a system for storing knowledge about knowledge within the design process. It records design decisions, the actors who take them and the roles they play when doing so. ADS links COMMIT to an existing object-oriented CAD system, MicroStation/J from Bentley Systems. The project focuses on tackling the problem of managing design information without intruding too much on the design process itself. It provides the possibility to effectively link design decisions back to requirements, to gather rationale information for later stages of the building lifecycle, and to gather knowledge of rationale for later projects. The system enables members of the project team, including clients and constructors, to browse and search the recorded project history of decision making both during and after design development. ADS aims to facilitate change towards a more collaborative process in construction design, to improve the effectiveness of decision-making throughout the construction project and to provide clients with the facility to relate design outcomes to design briefs across the whole building life cycle. In this paper we will describe the field trials of the ADS prototype carried out over a three-month period at the Building Design Partnership (BDP) Manchester office. The objective of these trials is to assess the extent, to which the approach underlying ADS enhances the design process, and to gather and document the views and experiences of practitioners. The ADS prototype was previously tested with historical data of real project (Peng, Cerulli et al. 2000). To gather more valuable knowledge about how a Decision Support System like ADS can be used in practice, the testing and evaluation will be extended to a real project, while it is still ongoing. The live case study will look at some phases of the design of a mixed residential and retail development in Leeds, UK, recording project information while it is created. The users’ feedback on the system usability will inform the continuous redevelopment process that will run in parallel to the live case study. The ADS and COMMIT Projects were both funded by EPSRC.
keywords	Design Rationale, Design Support Systems, Usability Evaluation
series	CAAD Futures
email
last changed	2006/11/07 07:22

For more results click below: