Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 716

Reformat results as: short short into frame detailed detailed into frame

_id	52e7
authors	Kvan, Thomas
year	2001
title	The problem in Studio Teaching – Revisiting the Pedagogy of Studio Teaching
source	Architectural Education for the Asian Century, Proceedings of the 1st ACAE Conference on Architectural Education, Milton Tan, editor, Centre for Advanced Studies in Architecture, National University of Singapore, pp. 95-105
summary	Studio teaching is well established as a process. It is often said that problem-based learning (PBL) is a late extension of our tradition of studio teaching into other disciplines. A re-examination of studio teaching against the practices of problem-based learning however reveals that important opportunities for learning are omitted in the studio setting.
keywords	Pedagogy; Learning; Virtual Studio; Problem-Based Learning
series	other
email
last changed	2002/11/15 18:29

_id	dc3f
authors	Fernández, Mónica Inés and Piegari, Ricardo Gustavo
year	2001
title	LA GRÁFICA DIGITAL COMO ÁREA DISCIPLINAR DE LA ARQUITECTURA (Digital Graphics as a Discipline inj Architecture)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 216-217
summary	Although we are already in the new millennium, some architects still doubt about the discipline introduction of the Digital Graph in architects development. For that reason, it is important to put forward some reflections in the sigradi, that collaborate to establish and spread the digital graph as a disciplinary area of teaching architecture. The Digital Graph included in the University of Architecture and postgraduation, collaborates from the biginning in the discipline development, as long as it trains and teaches the new way of architecture representation and prefiguration that arise from the introduction of new tools.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	a606
authors	Leão de Amorim, Arivaldo and Pereira, Gilberto Corso
year	2001
title	ATELIÊ COOPERATIVO DE SIMULAÇÃO DIGITAL EM ARQUITETURA E URBANISMO (Colaborative Studio for Architecture and Urbanism Digital Simulation)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 124-126
summary	Cooperative Atelier of Digital Simulation is a teaching proposal in that information technologies will be used intensively in the process of architectural design, particularly computer technologies for habitat simulation. In the first learning group, a experimental one - that should begin in the semester 2001.2, the computer will be used as an instrument for modeling, information management (spatial or not), making presentations, evaluation of alternatives and taking decisions, as well as for communication between the students’ teams and teachers of FAUFBA and, of other institutions that come to be integrating the project. The computer technologies could stand for the development of cooperative works. This paper synthesizes the proposal of creation of an optional discipline for students of Architecture and Urbanism.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	7134
id	7134
authors	Penttilä, Hannu (Ed.)
year	2001
title	Architectural Information Management [Conference Proceedings]
source	19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1 / Helsinki (Finland) 29-31 August 2001, 578 p.
doi	https://doi.org/10.52842/conf.ecaade.2001
summary	Several common phrases, such as “information society” or “virtual reality” point out the fact that information technology, digital tools and numerous different services via various communication networks have become crucially important factors of our western lifestyle and living environment. The trends of the society reflects naturally the working environments of the construction field, architectural discipline being amongst them. It is almost inconceivable to even imagine an architect without computer-based tools anymore. This evolutional development process has, from historical perspective, only recently started. The process is constantly evolving and rapidly increasing our possibilities to use and enjoy these modern digital fruits. The sometimes unpredictable and rapid changes in our working environment should make architects nervous about the impacts of the changes. All those delicate methods and collective traditions of the several thousand year architectural discipline(!), just simply cannot be transferred into the digital realm in a few decades. Researchers and teachers should very carefully, but still open mindedly, critically explore, analyse and adjust the so-called “modern technology” into the world of architecture, construction, design, planning – and education. We are not just “endusers”, It is we, in fact, who should define what, where and how are we willing to use it(IT). The value of information is constantly growing in our society, and in the future it will evidently be even more so. The value of information is quite hard to define with measurable or agreed concepts, but information evidently contains value-factors. The information which the architects are creating, modifying and manipulating, contains essential and valuable core data concerning the whole built environment of our society. It affects the physical surroundings of our society, in which we will be living for decades – hence, the information has a historical basis. The architectural core information also very strongly affects the quality of life of our fellow citizens – consequently, it has deep social meaning. The essentials of architectural information relies on the tradition of centuries – hence, it clearly has acknowledged cultural values, which are also extremely difficult to quantify. So how could architectural information be described? The information covers a wide range of heterogeneous concepts, items, values, methods, tools, materials, true facts, rumours, intuition and knowledge, plus a multitude of yet undefined or unpredictable factors, which still have to be watched and prepared for. Since the information deals with common and general subjects, it should also be described with common and general concepts. On the other hand as the information is also concerned with the minutiae of specific projects, the architectural information should also be described with well identified and unique entities. With our digital tools we handle all information – including architectural – more and more digitally. We have to handle and manipulate information currently as digital data, which could be understood the ”raw material” of architectural information. Digital data becomes valuable information, when some kind of meaning or purpose to somebody can be attributed to it. In the early gloomy days of ”digital architecture” in the 1960’s and 1970’s, researchers tried to describe architectural artefacts and even design process mathematically. The details of architectural information were quite difficult to describe with binary alphanumeric information of main-frame machines. The architects’ tools development then led to a trend where architects could better represent and visualize the design objects digitally. The widespread and common use of 2D-drawing and 3D-modelling tools is still a very strong trend within our discipline. In fact it is “the way” the majority of architectural information is managed today. During the last 15–20 years, so-called conceptual modelling or product data modelling, done in various technical and construction field research units worldwide, has from one viewpoint clarified the basis and essence of architectural information. Hence, it’s not only CAD-software application development, but also elementary and theoretical research that gives us valuable help to survive among the ever growing seas of terabits of data in the future to come. Architectural information is something that simply cannot be described just with DWG-drawings or dummy scanned photographs any more. Although drawings and photos may contain very important bits of architectural documentation, we need ntimes more “complexity layers”, concepts and tools to manage and understand the essence of architectural information today. A proper way to manage the data we are working with, has to cover the whole architectural discipline. The methods and tools also have to be valid and flexible for several decades in the future.
keywords	Information Management & Data Structuring, Education & Curricula, Modeling & City Planning
series	eCAADe
email
more	http://www.hut.fi/events/ecaade/
last changed	2022/06/07 07:49

_id	9608
authors	Santos, Eduardo Mascarenhas and Laguardia Campomori, Maurício José
year	2001
title	ATELIÊ VIRTUAL DE PROJETOS; UMA DISCIPLINA DE PROJETOS MEDIADA POR COMPUTADOR (Virtual Design Studio; A Design Course Mediated by Computer)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 189-191
summary	The creation of the discipline “Virtual Design Studio” (http://www.arq.ufmg.br/vds) in the course of Architecture, at the Architecture School of UFMG, had the objective of investigating the usage of new technologies of information in the architectural planning activities through the elaboration and development of an architectural project. The methodological implications of applying those technologies on both, the creative process and architectural expression, are also discussed. The description of the knowledge obtained by both, the technical/conceptual structuring and the practical development of the VDS itself, as well as its critical analysis, constitute the main object of this work.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	7897
authors	Achten, Henri and De Vries, Bauke
year	2001
title	Multiple Sketch Users in DDDoolz
source	Stellingwerff, Martijn and Verbeke, Johan (Eds.), ACCOLADE - Architecture, Collaboration, Design. Delft University Press (DUP Science) / ISBN 90-407-2216-1 / The Netherlands, pp. 153-162 [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	This paper presents DDDoolz, a desktop-VR three-dimensional voxel sketchtool. DDDoolz is developed in the Design Systems Group to explore the use of Virtual Reality technology in the early design stage. The aim is to offer a sketch-like environment in VR with an unobtrusive interface. The paper presents DDDoolz, how it is used in education and with partners in architectural practice, and some future developments. As an extension to current functionality, the possibility of multiple users at the same time will be developed in the system for the {ACCOLADE} workshop.
series	other
email
last changed	2001/09/14 21:30

_id	28b9
authors	Achten, Henri
year	2001
title	Future Scenario for a Collaborative Design Session
source	Stellingwerff, Martijn and Verbeke, Johan (Eds.), ACCOLADE - Architecture, Collaboration, Design. Delft University Press (DUP Science) / ISBN 90-407-2216-1 / The Netherlands, pp. 163-168 [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	A collaborative design project consists of a team of design partners who are engaged during the period of the project in a particular design task. The group forms a short-lived community with the goal to create a design. The environment in which this is done today, consists of the participants office spaces, completed with equipment such as drawing tables, coffee machines, fax machines, CAD stations, etc. None of these elements reflect the existence of the (temporary) community that a design partner participates in. In this workshop paper we propose that the current two-dimensional desktop metaphor in a computer does not adequately support collaborative design. The typical 2D-desktop multiple open windows with different applications gives a fractured view of the design project in which by contrast the designer as a person conceives of himself as a whole. Moreover, the sense of place, or a consistent identity in which the design takes place is also lacking. The notion of _virtual environmentsÑ can assist in further developing design support for collaborative design in the future, as is sketched in the following outline.
series	other
email
last changed	2001/09/14 21:30

_id	7e52
authors	Achten, Henri
year	2001
title	Normative Positions in Architectural Design - Deriving and Applying Design Methods
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 263-268
doi	https://doi.org/10.52842/conf.ecaade.2001.263
summary	This paper presents a recently finished course of eight weeks where CAAD skills, design methodology, and architectural theory are combined to discuss possible perspectives on the use of the computer in design, and its influence on architecture. In the course, three contemporary architects were studied; Peter Eisenman, Ben van Berkel, and Greg Lynn. Each was discussed on aspects of ontology (which are the elements of discourse), design method (design process and organization of the process), and the use of the computer (techniques and approaches). These were linked with design theory, architectural theory, and CAD-theory. The reflection on the work of the architects resulted in a number of design methods for each architect. The design methods were adapted to the available technologies in the university as well as to the scope of the exercise, since the period of eight weeks for an exercise cannot compete with design processes in practice that take many participants and much time. The students then applied the design methods to a design task: student housing and an exhibition pavilion on the campus area of the university. The task was so devised, that students could focus on either architectural or urban design level with one of the design methods. Also, the choice of architects and accompanying design methods was made in such a way that students with low, medium, and advanced computer skills could take part in the course and exercise. In a workshop held at the Czech Technical University (CVUT) in Prague, the same procedure was used in a one-week period for a different design task, but in an otherwise almost identical setting with respect to the CAAD software used. The methods and material were easily transferred to the other setting. The students were able to cope with the task and produced surprising results in the short time span available. The paper will provide an overview of the course, discuss the pedagogical implications of the work, and discuss how this particular work can be generalized to incorporate other architects and approaches.
keywords	CAAD: Design Methods, Pedagogy
series	eCAADe
email
last changed	2022/06/07 07:54

_id	avocaad_2001_14
id	avocaad_2001_14
authors	Adam Jakimowicz
year	2001
title	Non-Linear Postrationalisation: Architectural Values Emergence in a Teamwork Interpretation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The paper presents the outcomes of the experiment being conducted at the Faculty of Architecture in Bialystok, which derives form three main sources: a new course of architectural composition by computer modelling, developed and conducted in Bialystok postrationalisation as a formulation platform for new architectural values and theories, applied by e.g. Bernard Tschumi the idea of new values emergence resulting form a teamwork, when placed in an appropriate environment; It is assumed that the work performed first intuitively, can be later seriously interpreted, and to some extent rationalised, verbalised, described. With no doubt we can state, that in creative parts of architectural activities, very often decision are taken intuitively (form design). So this ‘procedure’ of postrationalisation of intuitively undertaken efforts and results seems to be very important –when trying to explain ideas. This kind of activity is also very important during the first years of architectural education. In case of this experiment, the students’ works from the course of architectural composition are taken as a base and subjects for interpretation, and values research. However, when at first, individual works are being interpreted by their authors, at the latter stage, the teams are to be formed. The aim of the teamwork is to present individual works, analyse them, find common value(s), and represent it (them) in an appropriate, creative way. The ideal environment to perform this work is hypertext based internet, because the non-linearity of team interpretations is unavoidable. On the other hand, the digital input data (computer models) is a very appropriate initial material to be used for hypermedia development. The experiment is to analyse the specific of the following: the self-influence of the group on the individual work ‘qualification’, mutual influence of the team members on their own work interpretation, the influence of the digital non-linear environment on the final outcome definition. The added value of hypertext in architectural groupwork digital performance shall be examined and described. A new value of individualised, though group based, non-linearity of expression will be presented and concluded.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	9c0c
authors	Af Klercker, Jonas and HenrichsÈn, Jan
year	2001
title	Can simulations in VE support architects in solving complex design problems?
source	Stellingwerff, Martijn and Verbeke, Johan (Eds.), ACCOLADE - Architecture, Collaboration, Design. Delft University Press (DUP Science) / ISBN 90-407-2216-1 / The Netherlands, pp. 77-82 [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	Building design is facing development of industrialization of the production on the one hand and more complex 'One of a Kind' products on the other. This will be for rebuilding of a large stock of existing buildings and what can be left to new production. In both cases the results of the design process have to be solid to guarantee a successful product. In both cases an integrated and careful design process is absolutely crucial. The demands on the built environment make the systems of buildings more and more complex and have to be handled by a lot of different expertise. To avoid the 'Relay Race' of today the design teams of tomorrow must work much more integrated. To make integrated solutions, which means simultaneous constrains on all systems, the experts of different fields have to understand more of how all engaged systems relate and influence each other. Communication then consists of complex situations and processes that have to be understood and related to reality. In this aspect a multidimensional Virtual Environment interface has advantages and has been successfully used in design processes in other industries. In this paper the problems that have to be studied are for example Methodical, Conceptual, Technical and Process economical.
series	other
email
last changed	2001/09/14 21:30

_id	af65
authors	Akleman, E., Chen, J. and Sirinivasan, V.
year	2001
title	An Interactive Shape Modeling System for Robust Design of Functional 3D Shapes
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 248-257
doi	https://doi.org/10.52842/conf.acadia.2001.248
summary	In Architecture, it is essential to design functional and topologically complicated 3D shapes (i.e. shapes with many holes, columns and handles). In this paper, we present a robust and interactive system for the design of functional and topologically complicated 3D shapes. Users of our system can easily change topology (i.e. they can create and delete holes and handles, connect and disconnect surfaces). Our system also provide smoothing operations (subdivision schemes) to create smooth surfaces. Moreover, the system provides automatic texture mapping during topology and smoothing operations. We also present new design approaches with the new modeling system. The new design approaches include blending surfaces, construction of crusts and opening holes on these crusts.
keywords	Modeling, Shape Design, Sculpting, Computer Aided Geometric Design
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ascaad2004_paper12
id	ascaad2004_paper12
authors	Al-Qawasmi, Jamal
year	2004
title	Reflections on e-Design: The e-Studio Experience
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	The influence of digital media and information technology on architectural design education and practice is increasingly evident. The practice and learning of architecture is increasingly aided by and dependant on digital media. Digital technologies not only provide new production methods, but also expand our abilities to create, explore, manipulate and compose space. In contemporary design education, there is a continuous demand to deliver new skills in digital media and to rethink architectural design education in the light of the new developments in digital technology. During the academic years 2001-2003, I had the chance to lead the efforts to promote an effective use of digital media for design education at Department of Architecture, Jordan University of Science and Technology (JUST). Architectural curriculum at JUST dedicated much time for teaching computing skills. However, in this curriculum, digital media was taught in the form of "software use" education. In this context, digital media is perceived and used mainly as a presentation tool. Furthermore, Computer Aided Architectural Design and architectural design are taught in separate courses without interactions between the two.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	avocaad_2001_05
id	avocaad_2001_05
authors	Alexander Koutamanis
year	2001
title	Analysis and the descriptive approach
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The rise of consciousness concerning the quality of working and living conditions has been a permanent though frequently underplayed theme in architecture and building since the reconstruction period. It has led to an explosive growth of programmatic requirements on building behaviour and performance, thus also stimulating the development of design analysis. The first stage of development was characterized by the evolution of prescriptive systems. These reversed the structure of pre-existing proscriptive systems into sequences of known steps that should be taken in order to achieve adequate results. Prescriptive systems complemented rather than replaced proscriptive ones, thereby creating an uncertain mixture of orthodoxy and orthopraxy that failed to provide design guidance for improving design performance and quality.The second stage in the development of design analysis focuses on descriptive methods and techniques for analyzing and supporting evaluation. Technologies such as simulation and scientific visualization are employed so as to produce detailed, accurate and reliable projections of building behaviour and performance. These projections can be correlated into a comprehensive and coherent description of a building using representations of form as information carriers. In these representations feedback and interaction assume a visual character that fits both design attitudes and lay perception of the built environment, but on the basis of a quantitative background that justifies, verifies and refines design actions. Descriptive analysis is currently the most promising direction for confronting and resolving design complexity. It provides the designer with useful insights into the causes and effects of various design problems but frequently comes short of providing clear design guidance for two main reasons: (1) it adds substantial amounts of information to the already unmanageable loads the designer must handle, and (2) it may provide incoherent cues for the further development of a design. Consequently the descriptive approach to analysis is always in danger of been supplanted by abstract decision making.One way of providing the desired design guidance is to complement the connection of descriptive analyses to representations of form (and from there to synthesis) with two interface components. The first is a memory component, implemented as case-bases of precedent designs. These designs encapsulate integrated design information that can be matched to the design in hand in terms of form, function and performance. Comparison between precedents with a known performance and a new design facilitate identification of design aspects that need be improved, as well as of wider formal and functional consequences. The second component is an adaptive generative system capable of guiding exploration of these aspects, both in the precedents and the new design. The aim of this system is to provide feedback from analysis to synthesis. By exploring the scope of the analysis and the applicability of the conclusions to more designs, the designer generates a coherent and consistent collection of partial solutions that explore a relevant solution space. Development of the first component, the design case-bases, is no trivial task. Transformability in the representation of cases and flexible classification in a database are critical to the identification and treatment of a design aspect. Nevertheless, the state of the art in case-based reasoning and the extensive corpus of analysed designs provide the essential building blocks. The second component, the adaptive generative system, poses more questions. Existing generative techniques do not possess the necessary richness or multidimensionality. Moreover, it is imperative that the designer plays a more active role in the control of the process than merely tweaking local variables. At the same time, the system should prevent that redesigning degenerates into a blind trial-and-error enumeration of possibilities. Guided empirical design research arguably provides the means for the evolutionary development of the second component.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	9fe2
authors	Almeida da Silva, A.B., Serón Arbeloa, F.J., Magallón Lacarta, J.A. and Félix, N.R.
year	2001
title	PICTÓRICA O CIENTÍFICA? LA ACTIVIDAD DE GENERACIÓN DE IMÁGENES SINTÉTICAS EN EL CONTEXTO DE ENSEÑANZA (Pictoric or Scientific? The Activity of Generation of Synthetic Images in the Teaching Context)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 192-194
summary	This work is restricted to the field of Graphics Representation in Architecture, analyzing the use of illumination models which are present at the software usually used for the development of images to describe the architectural objects. The differences between the real scene and the equivalences structured into the world of computer graphics related to the illumination models and light, are specially specified. This work analyses the categories of architectural problems associated to each of the available models; questions how this associations are included in architectural teaching context and studies how associated they are during the academic studies of the architect.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	1f37
authors	Alpha, Lee W.K. and Iki, Kazuhisa
year	2001
title	Moving Architecture and Transiting Landscape. Interactive Rendering System for Animated Assessment
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 739-752
summary	In this paper, an Interactive Rendering System for Animated Assessment (IRSA2) is proposed. Using IRSA2, different to the usual process that the respondents are allowed only to select alternatives designed by planners, they are allowed to participate in the design process and create alternatives as proposals in a web-based collaborative environment. This gives roads to an autonomous process in landscape planning and design. The system efficiency was verified by a case study of its use in a wind farm project in Japan.
keywords	Collaborative Design, Utilization Of Internet, Overall Design Strategy,
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	8c2d
authors	Alvarado, Rodrigo García
year	2001
title	PROJECTED SPACE: CHARACTERIZING THE “CYBRID ARCHITECTURE”.
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 285-287
summary	The “cybrid architecture” has been defined like integration of physical and digital spaces. Based on the capability of electronic media to generate virtual environments (cyberspaces) which could be related to buildings. However, theoretical studies and contemporary works reveal a more complex relationship between media and constructions. Expressed in architectural characteristics that constitutes a new spatial quality, named here projected space. Hence the paper argues that “cybrid architecture” is not technological, but is a modification of conventional architectural space due to cultural evolution.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	9d10
authors	Anders, Peter and Livingstone, Daniel
year	2001
title	STARS: Shared Transatlantic Augmented Reality System
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 350-355
doi	https://doi.org/10.52842/conf.acadia.2001.350
summary	Since October 2000 the authors have operated a laboratory, the Shared Transatlantic Augmented Reality System (STARS), for exploring telepresence in the domestic environment. The authors, an artist and an architect, are conducting a series of experiments to test their hypotheses concerning mixed reality and supportive environments. This paper describes these hypotheses, the purpose and construction of the lab, and preliminary results from the ongoing collaboration.
keywords	Mixed Reality, Cybrid, Art, Cyberspace, CAiiA-STAR
series	ACADIA
email
last changed	2022/06/07 07:54

_id	f95f
authors	Angulo, A.H., Davidson, R.J. and Vásquez de Velasco, G.P.
year	2001
title	Digital Visualization in the Teaching of Cognitive Visualization
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 292-301
doi	https://doi.org/10.52842/conf.acadia.2001.292
summary	Professional design offices claim that our graduates have difficulties with their free-hand perspective drawing skills. This fact, which has become obvious over the last 5 years, is parallel to a clear tendency towards the use of 3-dimensional digital imagery in the projects of our students. Frequently, faculty tends to blame the computer for the shortcomings of our students in the use of traditional media, yet there is no clear evidence on the source of the blame. At a more fundamental level, the visualization skills of our students are questioned. This paper will explain how faculty teaching design communication techniques, with traditional and digital media, are working together in the development of a teaching methodology that makes use of computers in support of our student’s training on cognitive visualization skills, namely; “The Third-Eye Method”. The paper describes the Third-Eye Method as an alternative to traditional methods. As evidence of the benefits offered by the Third-Eye Method, the paper presents the results of testing it against traditional methods among freshman students. At the end, the paper draws as conclusion that computers are not the main source of the problem but a potential solution.
keywords	Pedagogy, Visualization, Media
series	ACADIA
email
last changed	2022/06/07 07:54

_id	7501
authors	Apley, Julie
year	2001
title	A Virtual Reconstruction: Isthmia Roman Bath
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 410-411
doi	https://doi.org/10.52842/conf.acadia.2001.410
summary	The Isthmia Roman Bath is located in Greece overlooking a great ravine on the Isthmus of Corinth. It was in use during the 2nd through the 4th centuries. I have created a 3D VRML walkthrough of the ancient bath. This interdisciplinary project utilizes the research of an archaeologist, architect, and art historian. Because the researchers live in different locations, it made sense to use the Internet as a research tool. When clicking on the numbers on the home page, you can see the process that I went through to model the Roman Bath. After seeing the images, the researchers were able to visualize their research, reply to questions, and re-evaluate their findings. VRML promises an accessible, highly visual, and interactive representation of difficult to see data, opening up new ways of presenting research. It is possible to walk within the bath by clicking on the Virtual Reconstruction link. When in the "Entrance view", click on the vase to see a map of the ruin. There are three places within the project that link to the existing excavated site. Links are also available to walk outside. The project runs best on Windows NT using Netscape. You must have the plug-ins for Cosmoplayer (VRML) and Quicktime (movie). Because the VRML plug-in doesn't work as well on a Mac, it is possible that you may only be able to view the images and movie from the project.
series	ACADIA
last changed	2022/06/07 07:55

_id	sigradi2003_076
id	sigradi2003_076
authors	Armesto, Tristán
year	2003
title	Producción Digital de un Auditorio (Digital Production of an Auditorium)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	In the middle of the year 2001, we had the opportunity to project an Auditory in the particular building of our School of Architecture. The chance to produce the entire project an all the technical documentation was given; using only digital tools. The use of this tools let us to calculate illumination, isolation study, sound an thermical conditioning with a real time visualization of the three dimensional model.
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: