Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 716

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2411
authors	Chen, Sheng-Chih
year	2001
title	Analysis of the use of computer media by expert and novice designers
doi	https://doi.org/10.52842/conf.caadria.2001.071
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 71-80
summary	This paper is based on an experiment of protocol analysis. In order to investigate the differences in models designed under various circumstances, the paper attempts to find out how expert and novice designers develop their designs with computer media. It also compares expert designers with their novice counterparts by analyzing and generalizing some cases in their thinking and designing process. Thus a designer who is very familiar with software and have expertise in design must apply different strategies to their design. This is indeed the cause of changes in the process of promoting from a novice to an expert designer. Therefore, the differences between novices and experts can be one of the foci of educating novice designers.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2008_44_session4b_357
id	caadria2008_44_session4b_357
authors	Ham, Jeremy
year	2008
title	Developing The a+b/online Virtual Gallery
doi	https://doi.org/10.52842/conf.caadria.2008.357
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 357-363
summary	The a+b/online project is an exemplar of a comprehensive online resource that includes Virtual Galleries, resources, digital case studies and an image repository (http://www.ab.deakin.edu.au/online). Throughout its development since 2001, the project has expanded to include several thousand digital objects. This paper discusses the development of the a+b/online site and outlines some of the issues associated with its development. The current state of the project is discussed in relation to the current paradigm of citizen media including blogs.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	6430
authors	Jabi, Wassim (Ed.)
year	2001
title	ACADIA 2001 [Conference Proceedings]
doi	https://doi.org/10.52842/conf.acadia.2001
source	Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1/ Buffalo (New York) 11-14 October 2001, 415 p.
summary	The theme, which preceded my knowledge of ACADIA’s true age, resulted from a realization regarding the development and current state of CAD in Research, Education, and Practice. While I only got involved with ACADIA in the last half of its current life to date, I had the honor of studying with some of the early pioneers of CAD: 1) Harold Borkin, a founding member of ACADIA, 2) Jim Turner, a longtime ACADIAn, and a past ACADIA Conference organizer (actually the very first conference I attended), and 3) Ted Hall, another longtime ACADIAn. What I have learned from conversations with them and later witnessed for myself is a fundamental shift of focus in CAD from building tools to using tools. That is, while early CAD students, including myself, used to learn how to create software and tools to solve a particular problem, the current focus in the majority of schools that include a CAD component in their curriculum is on teaching the use of commercial software and/or the use of digital media in the design studio. One need only take a look at old list of courses that used to be offered in the CAD area and compare it with a new list to see this shift. Yet, one form of tool building that is continuing in a significant number of schools is the creation of scripts or small software modules (usually built using a visual editor) to create interactive systems for delivery over the web or on CD-ROM. Examples include the use of Macromedia Director or Flash for creating interactive digital titles. While this current state of affairs has increased the receptivity to digital tools and media, it does obscure an important fact. For knowledge to advance in this area, we need researchers who can not only use tools, but also invent new ones to solve new problems that are not addressed by the existing crop of commercial software. The more time we spend not educating our students in the art and science of building digital tools, the harder it will be to: 1) find teachers in the future with those skills, 2) advance and influence the development of the state-of-the-art in CAD, and 3) erase the use of CAD as a euphemism for slick computer-generated imagery. While not common, the tradition of tool building is still going on most notably in architecture schools with strong financial resources and those that offer doctoral level education. Commercial, governmental and business/education entities are also continuing the research tradition of tool building. ACADIA, as a reflection of the field it focuses on, has widened its scope to solicit papers that deal with CAD education and the use of CAD in practice. Thus, you will read in this book papers that focus on all three aspects: research, education, and practice and in some cases the intersection of two or more of those areas. Thankfully, ACADIA, while concerned with CAD in education has maintained its receptivity to basic research papers as well as a willingness to publish innovative papers in the area of practice. As chair of the technical committee, I made sure that the call for papers and the final selection reflects this desire. We should continue to emphasize the need for presenting this diversity of work in our annual conferences and I am optimistic that the ACADIA community is in support of this notion.
series	ACADIA
email
more	www.acadia.org
last changed	2022/06/07 07:49

_id	ga0109
id	ga0109
authors	Lewis, Chak Chan
year	2001
title	Defects Defined by Form Making Method for Improving Generative Design System
source	International Conference on Generative Art
summary	Evolutionary-based Generative Design System (GDS) is generally designed for industrial designers during the early stage of conceptual design. Although “additive” Rapid Prototyping (RP) methods are commonly applied for the physical realization, grown Surfaces Object (SO) created from these GDS still has room to be considered to a combined workable volume,especially for the more complex design. The inarticulate processes from GDS to Generative Production System (GPS) are linking up with different aspects and contexts as well as the conventional Computer-Aided Design (CAD)/RP integration, which has been conducted for along time. There are design constraints existing between 3D SO in industry design representation and feasible 3D production solution. Perception to object designing with knowledge is limited at SO forming by incomplete interpretations. Meanwhile, it is difficult to discern the problemsof incomplete object generation as hidden illegal design occurred from time to time because of the design constraints, despite the completion of the design representation. It has led to some of the invalidity of surface feature at the end. The reconstruction of the RP process ofthe SO pre-processing procedure can help to clarify these defects with thickness requirement in generative production. The aim of this paper is to verify an effective generative design strategy as a possibility ofimplementing method(s) or tool. They will be built within a surface-oriented GDS by mapping a valid object directly accepted by any RP system without any influence on generative object creating. Through the involvement of Form Making processes of RP from selected instants with their solid phenomena, evidences are used for defending this viewpoint.Throughout the process, generative design method and CAD method have been utilized for the creation of virtual form. The 3D printer and Fused Deposition Modeling (FDM) technology with “trial and error” method were employed in the RP processes.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	87e3
authors	Liu, Y.-T., Shih, S.-C., Yeh, Y.-C. and Lee, H.-L.
year	2001
title	Design Production and Appreciation with Computer and Internet - Evolving Phenomena of Design Review in CAD Studio and Internet-based Competition
doi	https://doi.org/10.52842/conf.ecaade.2001.382
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 382-387
summary	This study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet. The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment.
keywords	CAD Studio, Internet-Based Competition, Design Review
series	eCAADe
email
last changed	2022/06/07 07:59

_id	6d37
authors	Léglise, Michel
year	2001
title	Computer-stimulated design: construction of a personal repertoire from scattered fragments
source	Automation in Construction 10 (5) (2001) pp. 577-588
summary	This paper describes some possibilities of creating and structuring a personal digital memory capable of facilitating architectural design and design learning. The raw materials of this memory are different representations that can be found on the Web. Having interpreted these representations, one is able to construct a meaningful memory, educated and personal, which can be called upon subsequently during the design phase, as long as one has a medium that can represent this memory and put it to good use. As a practical, effective application of this process, we will describe part of a configuration geared towards the learning of architectural design. This configuration is composed of various elements, precisely arranged in space and time in a set of interrelations and interactions. The design student is placed at the centre of the arrangement, from where he or she can call on a broad spectrum of possibilities from the Web as provider of image documents. When necessary, students can use specially developed software that allows them a verbal and pictorial interpretation stimulated during particular phases of the learning process. In this way, through pictorial material presented on the network, the students can build up a digital library appropriate to their own understanding of architecture and their own representation of the world. At this point, they can abandon the universe of digital documents and media and return to the world of materials and shapes in intensive design studio sessions, where slowly maturing ideas can at last find concrete form. Thus, we deal with the relationship between the public, shareable aspect of the documents, and the private aspect: the individual interpretation of these documents. In the same way, we show how, within the framework of the teaching programme that has been set up, and without interference, this relationship between public and private can be linked into a dimension of the work of learning which is at times personal, at times collective. The conclusion attempts to outline the issues raised by this sort of configuration, and to show how thoughtful use of computers and networks can stimulate and enrich design rather than just "aid" it, as is generally accepted.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	3c71
authors	Maver, Tom and Petric, Jelena
year	2001
title	MEDIA in MEDIATION Prospects for Computer Assisted Design Participation
source	Stellingwerff, Martijn and Verbeke, Johan (Eds.), ACCOLADE - Architecture, Collaboration, Design. Delft University Press (DUP Science) / ISBN 90-407-2216-1 / The Netherlands, pp. 121-134 [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	One of the most consistent, powerful and philosophical ideas which has run like a silk thread through the short and erratic history of the development of computer aided architectural design is that of user participation in the design decision-making process. It is not an idea with which the architectural profession is particularly comfortable but it is, the authors claim, one which is central to the professional ethic and, therefore, to be its ultimate survival. Design decision-making is, if addressed properly, a hugely, complex multi-variate, multi-person process on which precious little serious research has been focused. In the late 1960's the Design Methods Group in the USA and the Design Research Society in the UK formulated paper-based models of the design process and anticipated, in some regards with un-nerving accuracy, the way in which the application of information technologies would impinge beneficially on the process of design decision-making and, therefore, on the quality of the built environment. One concept expressed at that time was as follows: the application of computers to the modelling and prediction of the cost and performance behaviour of alternative design solutions allows subjective value judgements to be better informed and more explicitly audited, and that such subjective value judgements should be made by those most affected by them, i.e. the future owners and users of buildings. This paper is devoted to the critical re-examination of this concept, on the seminal research and development which has kept the notion alive over 30 years, and, how the current advances in multimedia, virtual reality and internet access make its ubiquitous adoption inevitable: in short, Media in Mediation.
series	other
email
last changed	2003/04/16 11:52

_id	2abf
id	2abf
authors	Rafi, A
year	2001
title	Design creativity in emerging technologies
source	In Von, H., Stocker, G. and Schopf, C. (Eds.), Takeover: Who’s doing art of tomorrow (pp. 41-54), New York: SpringerWein.
summary	Human creativity works best when there are constraints – pressures to react to, to shape, to suggest. People are generally not very good at making it all up from scratch (Laurel, 1991). Emerging technology particularly virtual reality (VR) Multimedia and Internet is yet to be fully discovered as it allows unprecedented creative talent, ability, skill set, creative thinking, representation, exploration, observation and reference. In an effort to deliver interactive content, designers tend to freely borrow from different fields such as advertising, medicine, game, fine art, commerce, entertainment, edutainment, film-making and architecture (Rafi, Kamarulzaman, Fauzan and Karboulonis, 2000). As a result, content becomes a base that developers transfer the technique of conventional medium design media to the computer. What developers (e.g. artist and technologist) often miss is that to develop the emerging technology content based on the nature of the medium. In this context, the user is the one that will be the best judge to value the effectiveness of the content. The paper will introduce Global Information Infrastructure (GII) that is currently being developed in the Asian region and discuss its impact on the Information Age society. It will further highlight the ‘natural’ value and characteristics of the emerging technologies in particular Virtual Reality (VR), Multimedia and Internet as a guidance to design an effective, rich and innovative content development. This paper also argues that content designers of the future must not only be both artist and technologist, but artist and technologist that are aware of the re-convergence of art and science and context in which content is being developed. Some of our exploration at the Faculty of Creative Multimedia, Multimedia University will also be demonstrated. It is hoped that this will be the evidence to guide future ‘techno-creative designers’.
keywords	design, creativity, content, emerging technologies
series	book
type	normal paper
email
last changed	2007/09/13 03:46

_id	d3d4
authors	Sato, Tomoya and Hagiwara, Masafumi
year	2001
title	IDSET: Interactive Design System using Evolutionary Techniques
source	Computer-Aided Design, Vol. 33 (5) (2001) pp. 367-377
summary	In this paper, we propose a tool-creating support system named IDSET (Interactive Design System using Evolutionary Techniques). Two kinds of Stages are used in theproposed IDSET: Stages where fundamental shapes are generated and Stages where they are combined. At each Stage, new shapes are generated by the system usingevolutionary techniques, and they are shown to the user. The user's creativity is stimulated by this process. Since the system begins with creating parts instead of usingparts that are prepared in advance, various novel tools can be formed. The user only has to evaluate the displayed tools, not to have to make them. A system to create toolsthat are composed of two fundamental parts has been implemented as an example of the proposed system. Computer experiments have been carried out, and various toolsand artistic shapes have been created. Some shapes which human beings could not easily envisage were included in the created shapes. This underlines the effectiveness ofthe proposed IDSET.
keywords	Interactive Design, Evolutionary Techniques, Tool-Creating Support System
series	journal paper
last changed	2003/05/15 21:33

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2dba
id	2dba
authors	Tasli, S
year	2001
title	WHAT DOES COMPUTER AIDED DESIGN OFFER FOR PRODUCING LIVABLE BUILDINGS IN THE 21ST CENTURY?
source	Proceedings of the Livable Environments and Architecture International Congress (LIVENARCH 2001). July 4-7, 2001, Trabzon, Turkey, pp. 278-282.
summary	Designing livable buildings has always been a major concern for architects but they are often criticized on account of failing in this aim. However, this is not only due to the ignorance of the designers, but also of the complexity of the factors that are essential to design but difficult to incorporate the design process. Buildings are shaped and occupied under several dynamically changing conditions and paper-based media and conventional Computer Aided Design (CAD) tools are inefficient in representing them. This paper aims to discuss the changing role of digital media for architectural design in response to the increasing complexity of design processes. Some proposals, supported by recent technological innovations, are suggested for the future and they are compared with the conventional uses of CAD. It is claimed that in the 21st century, the main advantage of using computers will be to dynamically simulate buildings in time in highly visualized virtual environments to evaluate the future performance of proposed designs. The design model will not only look as if it were real, but it will also “behave” as if it were real so as to provide dynamic and intelligent response. The two key technologies for the development of such modeling, virtual reality and object-oriented programming are addressed and four promising application areas for near future (evaluation of user-building interaction, visualization of environmental factors, construction scheduling, and combined CAD-GIS) are discussed. Some important considerations for the development of dynamically simulated virtual models are analyzed and suggestions are made for further research.
keywords	Architectural Design, Dynamic Simulation, and Virtual Environments
series	other
type	normal paper
email
last changed	2005/12/01 16:02

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	43ec
authors	Chen, Sheng-Chih
year	2001
title	The Role of Design Creativity in Computer Media
doi	https://doi.org/10.52842/conf.ecaade.2001.226
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 226-231
summary	This study discusses the use of design media and design creativity in design education. By combining cognitive studies with educational psychology, it analyzes the cognitive processes involved in the use of the computer by experts and novices, and compares the effects of the computer on the design process of both subjects. In doing so, it discusses computer design media as well as creative thinking.
keywords	Computer Media, Creativity, Expert And Novice, Creative Thinking
series	eCAADe
email
last changed	2022/06/07 07:55

_id	bf19
id	bf19
authors	Rafi, A
year	2001
title	Design computing: A new challenge for creative synergy
source	In Saito, N. (Ed.), Creative digital media: Its impact on the new century (pp. 132-136), Japan: Keio University Press
summary	As content becomes increasingly significant in giving ‘face’ to information technology (IT), the need to train and produce content designers has also become more and more important. The development of powerful computer technologies and the complexity of design have demanded designers to re-examine the design process and consider the adaptation of tools that will provide for creativity, improve the overall design process and, at the same time, reveal new insights (Rafi and Karboulonis, 2000). This paper gives an overview of the relationship between art and science through the ages, and discusses their relatively recent re-convergence. This text further argues that a re-convergence between art and science is currently occurring, highlighting the need to accelerate the process. It is suggested that re-convergence is a result of new technologies being researched, namely related to effective visualisation and communication of ideas and concepts, subsequently adopted by practitioners. Such elements, with tools that offer increased power and new abilities, are widely found today in the multimedia and the Virtual Environment (VE) as scientists and designers venture into each other’s domain. This paper also argues that content designers of the future must not only be both artist and technologist, but artist and technologist that are aware of the context in which content is being developed. The presentation will be a showcase of our exploration at the Faculty of Creative Multimedia, Multimedia University for the last 4 years, in integrating design and computer skills – the synergy that we called DESIGN COMPUTING.
keywords	design computing, creativity, content, design
series	book
type	normal paper
email
last changed	2007/09/13 03:43

_id	avocaad_2001_14
id	avocaad_2001_14
authors	Adam Jakimowicz
year	2001
title	Non-Linear Postrationalisation: Architectural Values Emergence in a Teamwork Interpretation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The paper presents the outcomes of the experiment being conducted at the Faculty of Architecture in Bialystok, which derives form three main sources: a new course of architectural composition by computer modelling, developed and conducted in Bialystok postrationalisation as a formulation platform for new architectural values and theories, applied by e.g. Bernard Tschumi the idea of new values emergence resulting form a teamwork, when placed in an appropriate environment; It is assumed that the work performed first intuitively, can be later seriously interpreted, and to some extent rationalised, verbalised, described. With no doubt we can state, that in creative parts of architectural activities, very often decision are taken intuitively (form design). So this ‘procedure’ of postrationalisation of intuitively undertaken efforts and results seems to be very important –when trying to explain ideas. This kind of activity is also very important during the first years of architectural education. In case of this experiment, the students’ works from the course of architectural composition are taken as a base and subjects for interpretation, and values research. However, when at first, individual works are being interpreted by their authors, at the latter stage, the teams are to be formed. The aim of the teamwork is to present individual works, analyse them, find common value(s), and represent it (them) in an appropriate, creative way. The ideal environment to perform this work is hypertext based internet, because the non-linearity of team interpretations is unavoidable. On the other hand, the digital input data (computer models) is a very appropriate initial material to be used for hypermedia development. The experiment is to analyse the specific of the following: the self-influence of the group on the individual work ‘qualification’, mutual influence of the team members on their own work interpretation, the influence of the digital non-linear environment on the final outcome definition. The added value of hypertext in architectural groupwork digital performance shall be examined and described. A new value of individualised, though group based, non-linearity of expression will be presented and concluded.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	12e3
authors	Ahmad Rafi, M.E., Che Zulkhairi, A. and Karboulonis, P.
year	2002
title	Interactive Storytelling and Its Role in the Design Process
doi	https://doi.org/10.52842/conf.caadria.2002.151
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 151-158
summary	Projects of ever increasing complexity and size have incited the need for new and robust design methodologies and tools in an effort to manage complexity, lower costs, ascertain quality and reduce risk. Technology convergence through the growing availability of networked computers, rapid progress in Computer Aided Design (CAD) and information management have encouraged the undertaking of even more complex designs that demand high degrees of interaction, collaboration and the efficient sharing and dissemination of information. It is suggested that interactive storytelling and interactive design (Rafi and Karboulonis, 2001) techniques that use non-linear information mapping systems can be deployed to assist users as they navigate information that is structured to address localized needs as they arise. The design process is a collaborative effort that encompasses diverse knowledge disciplines and demands the management and utilization of available resources to satisfy the needs of a single or set of goals. It is thought that building industry specialists should work close together in an organised manner to solve design problems as they emerge and find alternatives when designs fall short. The design process involves the processing of dynamic and complex information, that can be anything from the amount of soil required to level lands - to the needs of specific lightings systems in operation theatres. Other important factors that affect the design process are related to costs and deadlines. This paper will demonstrate some of our early findings in several experiments to establish nonlinear storytelling. It will conclude with a recommendation for a plausible design of such a system based on experimental work that is currently being conducted and is reaching its final stages. The paper will lay the foundations of a possible path to implementation based on the concept of multi-path animation that is appropriate for structuring the design process as used in the building industry.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	5cf4
id	5cf4
authors	Barrionuevo, Luis F.
year	2004
title	LOS "SPIROSPACES"
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 179-187.
summary	This paper deals with “Spirospaces”. These are a conversion to the third dimension of the two dimensional geometric entities called “Spirolaterals”. Abelson, Harold, diSessa and Andera (1968) gave the first rules concerning Spirolaterals. To obtain a Spirolateral from a set of straight lines, the first of them must be one unit long and the following must be incremented one unit at each step, at the same time that they turn in a constant direction. Odds (1973) establish the variation of the rotation direction, either to the left or the right. However, he did not give a mathematical relation able to calculate open Spirolaterals. Krawczyk (2001) developed a computer program that generates Spirolaterals following the method suggested by Abelson. These are Spirolaterals obtained by enumeration without a predictive mathematical formula. Krawczyc went farther proposing Spirolaterals based in curved lines. He pointed out that there are a variety of spirolateral forms that have architectural potentiality. Following this, the architectural potentiality of Spirolaterals is the basis of this paper. To take advantage of that potentiality a computer program was implemented to generate spatial configurations based in Spirolaterals. When a third dimension is given to the Spirolaterals they become Spirospaces. These new entities need spatial and design parameters to be useful for architectural purposes. Barrionuevo and Borsetti (2001) gave results about that work establishing the concept of Spirospaces. The aim of this paper is to describe a work directed to improve rules and procedures concerning Spirospaces. It is expected that these procedures governed by the proposed rules can be employed as tools during the early steps in the architectural design process. In this work some aspects concerning Spirospaces are considered. First, Spirolaterals are presented as the predecessors of Spirospaces. Second, Spirospaces are defined, together with their structural parameters. Architectural modeling is studied at the light of two special elements of the Spirospaces: Interstitial spaces and Object spaces. Next, a computer program is presented as the appropriate tool to model configurations having architectural potentiality. Finally, the results obtained running the computer program are analyzed to determine their possible use as architectural forms. Several graphic illustrations are presented showing steps going from the exploration of spatial alternatives to the selection of a specific configuration to be developed. It is expected that the described computer program could be employed as a design aid tool. As the operation of the program generates a variety of spaces able to dwell architectural objects, it eases the search of configurations suitable to specific functions. The results obtained have the possibility of being exported to computer graphic applications able to add materials, lights and cameras.
keywords	Spirolaterals, Spirospaces, architectural spaces, interstitial spaces, objectual spaces
series	other
type	normal paper
email
last changed	2005/04/07 15:34

For more results click below: