Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 717

Reformat results as: short short into frame detailed detailed into frame

_id	6473
authors	Caneparo, Luca and Robiglio, Matteo
year	2001
title	Evolutionary Automata for Suburban Form Simulation
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 767-780
summary	The paper outlines a research project to develop a dynamic simulation of suburbanization processes. The approach to simulating suburban form relies on modelling different interacting processes on various scales. Two layered models are implemented, the Socio-Economic and Zoning model and the Suburban Form model, respectively by means of cellular automata and genetic programming. The Socio-Economic and Zoning model simulates exogenous factors and endogenous processes of large-scale suburban dynamics. The model approximates the area by means of a rectangular grid to the scale of hundred meters. The Suburban Form model uses a smaller grid, to the scale of meters, and is three-dimensional. The resulting dynamic, 3D, fine-scale model will create scenarios of suburban growth, allowing evaluation of their consequences on built environment and landscape.
keywords	Urban Morphology, Model Based Design Support System, Urban Design, Landscape, Genetic Programming, Cellular Automata
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	ga0208
id	ga0208
authors	Wang, Xu and Lau, Siu Yu
year	2002
title	Pursuing New Urban Living Environment In The New Millennium: Projecting The Future Of High-Rise And High Density Living In Hong Kong
source	International Conference on Generative Art
summary	High-rise and high density living is a way of life for most of the 6.7 Million population of Hong Kong. The merits and demerits affiliated with Hong Kong’s compact urban form continues to attract academic deliberations and debates over the acceptability of such urban form as an alternative to urban sprawl for future city and urban life-style. This paper traces the development and causes for Hong Kong’s high-rise and high-density urban form over the past fifty years or so, and focuses its discussions on the pros and cons of high-rise living based on subjective user survey in late 2001 and early 2002. Because of an articulated land shortage, acute topography, escalating population growth, and shortage of time, Hong Kong government and planners have little options left but to adopt vertical development, resulted in a densely and mixed use urban habitat packed with closely built high-rise residences and commercial buildings. From the survey, it is clear that mixed and intensive land use, high quality of living and recreation infrastructure, efficient public transportation network, and segregation of pedestrian and traffic can facilitate the performance of compact urban form. In addition, most of Hong Kong families have been accustomed to high-rise living pattern and the disadvantages such living pattern might cause on its resident’s social communication and children education are readily ignored by most of the people. Based on the analysis of current living situation and development trends in Hong Kong, new pattern of future city form is conceived to be a likely applicable development way in a coastal city with such high density as Hong Kong in the next 50 years. Design countermeasures are presented in this paper to suggest ways of alleviating the pressure of the forever-increasing house requirements in Hong Kong. high-density, high-rise, compact city, social acceptance, life-style.
keywords	high-density, high-rise, compact city, social acceptance, life-style
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	avocaad_2001_05
id	avocaad_2001_05
authors	Alexander Koutamanis
year	2001
title	Analysis and the descriptive approach
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The rise of consciousness concerning the quality of working and living conditions has been a permanent though frequently underplayed theme in architecture and building since the reconstruction period. It has led to an explosive growth of programmatic requirements on building behaviour and performance, thus also stimulating the development of design analysis. The first stage of development was characterized by the evolution of prescriptive systems. These reversed the structure of pre-existing proscriptive systems into sequences of known steps that should be taken in order to achieve adequate results. Prescriptive systems complemented rather than replaced proscriptive ones, thereby creating an uncertain mixture of orthodoxy and orthopraxy that failed to provide design guidance for improving design performance and quality.The second stage in the development of design analysis focuses on descriptive methods and techniques for analyzing and supporting evaluation. Technologies such as simulation and scientific visualization are employed so as to produce detailed, accurate and reliable projections of building behaviour and performance. These projections can be correlated into a comprehensive and coherent description of a building using representations of form as information carriers. In these representations feedback and interaction assume a visual character that fits both design attitudes and lay perception of the built environment, but on the basis of a quantitative background that justifies, verifies and refines design actions. Descriptive analysis is currently the most promising direction for confronting and resolving design complexity. It provides the designer with useful insights into the causes and effects of various design problems but frequently comes short of providing clear design guidance for two main reasons: (1) it adds substantial amounts of information to the already unmanageable loads the designer must handle, and (2) it may provide incoherent cues for the further development of a design. Consequently the descriptive approach to analysis is always in danger of been supplanted by abstract decision making.One way of providing the desired design guidance is to complement the connection of descriptive analyses to representations of form (and from there to synthesis) with two interface components. The first is a memory component, implemented as case-bases of precedent designs. These designs encapsulate integrated design information that can be matched to the design in hand in terms of form, function and performance. Comparison between precedents with a known performance and a new design facilitate identification of design aspects that need be improved, as well as of wider formal and functional consequences. The second component is an adaptive generative system capable of guiding exploration of these aspects, both in the precedents and the new design. The aim of this system is to provide feedback from analysis to synthesis. By exploring the scope of the analysis and the applicability of the conclusions to more designs, the designer generates a coherent and consistent collection of partial solutions that explore a relevant solution space. Development of the first component, the design case-bases, is no trivial task. Transformability in the representation of cases and flexible classification in a database are critical to the identification and treatment of a design aspect. Nevertheless, the state of the art in case-based reasoning and the extensive corpus of analysed designs provide the essential building blocks. The second component, the adaptive generative system, poses more questions. Existing generative techniques do not possess the necessary richness or multidimensionality. Moreover, it is imperative that the designer plays a more active role in the control of the process than merely tweaking local variables. At the same time, the system should prevent that redesigning degenerates into a blind trial-and-error enumeration of possibilities. Guided empirical design research arguably provides the means for the evolutionary development of the second component.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
doi	https://doi.org/10.52842/conf.caadria.2010.443
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ga0133
id	ga0133
authors	Comino, Angelo (Motor)
year	2001
title	The Eliza’s Dream- Il sogno di Eliza
source	International Conference on Generative Art
summary	The Eliza’s dream (Il sogno di Eliza) is a small project about the practical use of generative or computer based methods applied on story writing. During this project the author, Motor (a.k.a Angelo Comino) explored all kind of help and interaction with the digital environment in order to write a common, but hopefully pleasant, mistery book, trough generative software,dialogues with classic artificial intelligence, with automated brainstormer or story telling expert systems.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	caadria2006_545
id	caadria2006_545
authors	DIETRICH ELGER, ANDREAS DIECKMANN, PETER RUSSELL, THOMAS STACHELHAUS
year	2006
title	THE INTEGRATED DESIGN STUDIO: A VIEW BEHIND THE SCENES:Liquid Campus 3
doi	https://doi.org/10.52842/conf.caadria.2006.x.v4r
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 545-548
summary	Over 10 months ending in July 2005, architecture students from Aachen, Karlsruhe and Weimar took part in a design studio that differed significantly from other studios in that the result of the studio was a 1:1 realisation of the design. This is part of an evolution of the virtual faculty of architecture “Liquid Campus”, founded in 2001, which has seen the complexity of the projects steadily rise and this continued in the Project “Ein Fest: Ein Dach”. The integrated studio is arranged to encourage an active, economic and transparent learning process, which encompasses design, communication and cooperation issues. The stated goal at the beginning of the two-semester process is to build and although only a few of the ideas are realised, all participants are involved in the realisation. In this case, the project was to create “roofs” for an open-air concert for 200,000 people in Karlsruhe, Germany. The planning was carried out using the Netzentwurf platform, with which the authors have several years experience.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	diss_duarte
id	diss_duarte
authors	Duarte, J. P.
year	2001
title	Customizing mass housing: a discursive grammar for Siza’s Malagueira houses
source	PhD dissertation, Department of Architecture, Massachusetts Institute of Technology, Cambridge, Mass
summary	This thesis proposes a process of providing mass-customized housing based on computer-aided design and production systems. It focuses on the design part, which mainly consists of an interactive system for the generation of design solutions based on a mathematical model called discursive grammar. A discursive grammar includes a shape grammar, a description grammar, and a set of heuristics. The shape grammar provides the rules of formal composition, whereas the description grammar describes the design from other relevant viewpoints. The set of heuristics is used to guide the generation of designs by comparing the description of the evolving design with the description of the desired house. The generation of a design proceeds first by producing a design brief from the user-prompted requirements and then by finding a solution that satisfies this brief. Search is largely deterministic, which decreases the amount of time required to find a solution, thereby making it reasonable to develop Web-based implementations. The proposed model enables an enduring designer's dream, that of the mass customization of housing. The model is illustrated with a case study that includes a shape grammar developed for the houses designed by the architect Alvaro Siza at Malagueira, a description grammar based on the Portuguese housing regulations, and a set of heuristics inferred after a set of experiments. In these experiments, designers were asked to generate houses based on the Malagueira grammar for specific clients. It is argued that this discursive grammar provides a rigorous method for understanding and teaching Siza's design process and that similar grammars could be developed for other styles. A Web page for explaining the grammar and generating new designs on-line was developed as a prototype.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	470c
authors	Kuenstle, Michael W.
year	2001
title	COMPUTATIONAL FLUID DYNAMIC APPLICATIONS IN WIND ENGINEERING FOR THE DESIGN OF BUILDING STRUCTURES IN WIND HAZARD PRONE AREAS (Computational Flow Dynamic Applications in Wind Engineering for the Design of Building Structures in Wind Hazard Prone Urban Areas)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 67-70
summary	This paper documents an initial study investigating the integration of Computational Fluid Dynamics (CFD) simulation modeling into wind mitigation design for building structures located in wind hazard prone areas. Some of the basic principles and theoretical concepts of fluid flow and wind pressure as well as their translation into design criteria for structural analysis and design are reviewed, followed by a discussion of a CFD application case study for a simulated hurricane force wind flow over a low rectangular building using the k-epsilon turbulence model. The techniques and parameters for development of the simulation are discussed and some preliminary interpretations of the results are evaluated by comparing its predictions against existing experimental and analytical data, with special attention paid to the American Society of Civil Engineers, Minimum Design Loads for Buildings and Other Structures, ACSE 7-98 and the Uniform Building Code .
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	d00c
authors	Kós, José Ripper
year	2001
title	Modeling the City History
doi	https://doi.org/10.52842/conf.ecaade.2001.436
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 436-441
summary	This paper explores the idea that 3D city models integrated with hypermedia systems can facilitate the sense of belonging to a place. 3D models are powerful tools for buildings and urban space analysis as artifacts, which synthesize men’s reality and aspirations. As such, combined with hypermedia resources, they can strengthen the spectator’s actual experience in the analyzed space. The focus of the investigation is 3D models constructed to represent and analyze city evolution. The experience of developing the models of Latin American cities – Rio de Janeiro, Brazil and Havana, Cuba – developed at PROURB (Faculty of Architecture and Urbanism, Federal University of Rio de Janeiro) is explained with an overview of its methodology.
keywords	3D City Model, Hypermedia, Sense Of Place, City Evolution, Latin America
series	eCAADe
email
last changed	2022/06/07 07:52

_id	1409
authors	Lin, Ying-Tzu and Chiu, Mao-Lin
year	2001
title	Digital cinematheque:Designing the virtual environment with issues of the context and atmoshere
doi	https://doi.org/10.52842/conf.caadria.2001.051
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 51-61
summary	The rise of virtual environments (VEs) is made possible due to the recent rapid development of the Internet and virtual reality (VR) technologies. The purpose of this study is to explore the possibilities of the virtual environment design by examining the characteristics of VE, and comparing its differences from physical environments. In the illustration of a design project "digital cinematheque", the context and atmosphere of virtual environments are thoroughly studied, and the feasibilities and directions of developments of virtual environments are subsequently enlightened with the proposed design concepts and related issues.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	39ea
authors	Maver, T., Harrison, C. and Grant, M.
year	2001
title	Virtual Environments for Special Needs. Changing the VR Paradigm
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 151-159
summary	The normal application of Virtual Reality is to the simulation of environments, which are in some way special - remote, hazardous or purely imaginary. This paper describes research and development work which changes the paradigm by simulating perfectly ordinary buildings for special people. Some 15% of the population have some form of physical impairment - a proportion which is likely to rise in line with an ageing population. New legislation, such as the UK Disability Discrimination Act places additional responsibility on building owners to ensure adequate access for people with an impairment and this in turn will place additional responsibility on the architect. Current methods of auditing access for new building are primitive and require the auditor to interpret plans/sections of the proposed building against a checklist of requirements specific to the special need. This paper reports on progress in the use of an immersive VR facility to simulate access to buildings for two broad classes of user: i) those with a mobility impairment; ii) those with visual impairment. In the former case, a wheelchair motion platform has been designed which allows the wheelchair user to navigate the virtual building; a brake and motor connected to the rollers on which the wheelchair sits facilitate the effects of slope and surface resistance. In the latter case, the main categories and degrees of visual impairment can be simulated allowing architects to assess the contribution of form, colour and signage to safe access.
keywords	Virtual Reality, Mobility Impairment, Visual Impairment, Access, Simulation
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	cd0b
authors	Meloni, Wanda
year	2001
title	The Slow Rise of 3D on the Web
source	Computer Graphics Worlds - July 2001, p. 22
summary	Consumer, commercial, and educational applications on the Web have been slow to take advantage of 3D, although for years it has been viewed as a boon for the graphics industry. Over the last 18 months, the situation has begun to look more favorable for the graphics industry, reports M2 Research's Wanda Meloni. Meloni says changes in the market and in technology have fueled the rise of 3D on the Web. The increase in broadband connections from 2.7 million users in 1999 to 8 million users in 2000 means that the market of consumers who have Internet connections fast enough to view and interact with 3D content has grown considerably. Also, 3D players are no longer limited to a proprietary format now that new game consoles from Nintendo and Microsoft will offer Web-based real-time 3D multiplayer gaming; in addition, 3D graphics technology will now be embedded into applications for Internet appliances and handheld devices. M2 Research estimates that the number of Web media players that are 3D-enabled will rise from 17 percent currently to 32 percent by the end of the year, as 3D player vendors offer more direct support to 2D players such as RealPlayer and Shockwave. Still, content production will remain a major hurdle because millions of Web authors are not using 3D. Meloni says creative professionals and digital designers will need a new set of 3D tools that will work seamlessly with current Web content in video, 2D graphics, and audio.
series	journal paper
last changed	2003/04/23 15:50

_id	0865
authors	Mishima, Yoshitaka and Szalapaj, Peter John
year	2001
title	Architectural Design Development through Multimedia Interaction
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 299-314
summary	This paper describes the development of a multimedia system aimed at architects and architectural students for the purpose of helping them to understand the basic concepts of architectural analysis. Analytical features in the system that we have developed include many design-theoretic concepts such as massing, balance and circulation. Other concepts are more directly related to the built environment and include elements such as lighting, structure and construction. The system illustrates architectural analysis carried out on a range of building types dynamically, and allows users to navigate architectural analyses interactively. Users can learn about the differences between buildings and their corresponding analyses in a supportive non-linear learning process, and can explore building types depending upon their own interests or needs. The prototype system contains analyses of three British building projects. They show different types of architecture in order to demonstrate important design theoretic and environmental differences. Conceptual models in the system show important aspects of a particular analysis simply, and each analysis is additionally described with text, animations, video clips and interviews with architects (talking heads). Most of the models were generated by the use of architectural CAD software. Animation techniques were used to describe the analyses of buildings clearly and dynamically. Users can visualise how whole buildings were designed from an analytical point of view, and the system illustrates design thinking by showing dynamic presentations of analyses. Users can structure their own design learning processes through a series of interactions. These interactions are supported with flexible cross-referencing mechanisms implemented in Macromedia Director 8.0 exploiting Frame Markers, Event Handling, Navigation, and Buttons in the context of the object-oriented Lingo programming language. The navigation component of this system has a logical matrix structure reflecting the fact that analytical information is interrelated across building types, giving rise to vertical and horizontal patterns of access. The features of Director 8.0 can control this navigation in a flexible yet structured way. Users not only learn about analysis, but also how to present their own designs to the public through the use of different kinds of presentation techniques, particularly through the use of conceptual models. We intend that users can show their projects from their own analytical viewpoints instead of simply showing realistic images of final designs. Presentations can also be recorded in the system, and these can in turn be used as reference material for other users. This system is currently being developed further by storing presentations and translating them into different languages (e.g. Japanese) so that foreign users in other institutions can interact with these presentations. This system has been evaluated in the context of an undergraduate CAD course at the School of Architecture, University of Sheffield, UK. We are currently examining the usefulness of the system based upon an evaluation process, in addition to including more building types for future study.
keywords	Analysis Of Form, Dynamic Interaction, Conceptual Models
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	48db
authors	Proctor, George
year	2001
title	CADD Curriculum - The Issue of Visual Acuity
doi	https://doi.org/10.52842/conf.ecaade.2001.192
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 192-200
summary	Design educators attempt to train the eyes and minds of students to see and comprehend the world around them with the intention of preparing those students to become good designers, critical thinkers and ultimately responsible architects. Over the last eight years we have been developing the digital media curriculum of our architecture program with these fundamental values. We have built digital media use and instruction on the foundation of our program which has historically been based in physical model making. Digital modeling has gradually replaced the capacity of physical models as an analytical and thinking tool, and as a communication and presentation device. The first year of our program provides a foundation and introduction to 2d and 3d design and composition, the second year explores larger buildings and history, the third year explores building systems and structure through design studies of public buildings, fourth year explores urbanism, theory and technology through topic studios and, during the fifth year students complete a capstone project. Digital media and CADD have and are being synchronized with the existing NAAB accredited regimen while also allowing for alternative career options for students. Given our location in the Los Angeles region, many students with a strong background in digital media have gone on to jobs in video game design and the movie industry. Clearly there is much a student of architecture must learn to attain a level of professional competency. A capacity to think visually is one of those skills and is arguably a skill that distinguishes members of the visual arts (including Architecture) from other disciplines. From a web search of information posted by the American Academy of Opthamology, Visual Acuity is defined as an ability to discriminate fine details when looking at something and is often measured with the Snellen Eye Chart (the 20/20 eye test). In the context of this paper visual acuity refers to a subject’s capacity to discriminate useful abstractions in a visual field for the purposes of Visual Thinking- problem solving through seeing (Arnheim, 1969, Laseau 1980, Hoffman 1998). The growing use of digital media and the expanding ability to assemble design ideas and images through point-and-click methods makes the cultivation and development of visual skills all the more important to today’s crop of young architects. The advent of digital media also brings into question the traditional, static 2d methods used to build visual skills in a design education instead of promoting active 3d methods for teaching, learning and developing visual skills. Interactive digital movies provide an excellent platform for promoting visual acuity, and correlating the innate mechanisms of visual perception with the abstractions and notational systems used in professional discourse. In the context of this paper, pedagogy for building visual acuity is being considered with regard to perception of the real world, for example the visual survey of an environment, a site or a street scene and how that visual survey works in conjunction with practice.
keywords	Curriculum, Seeing, Abstracting, Notation
series	eCAADe
email
last changed	2022/06/07 08:00

_id	4112
authors	Raposo, M., Sampio, M. and Raposo, P.
year	2001
title	A City Simulator
doi	https://doi.org/10.52842/conf.acadia.2001.052
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 052-061
summary	This paper presents a new computer model for city skyline simulation. It works by shaping medium and high-rise buildings to their best performance. This new tool was conceived to simulate and analyze cities where tall buildings are emerging on pre-existing urban schemes with irregular geometry and where inter-building spacing is proportional to the height of built blocks. The model is based on two main inputs, namely: the description of the network formed by land subdivision of the actual or irregular urban schemes, and the building regulations quantitative parameters based on solar obstruction angles and maximum usability rates. By combining data from these inputs, the computer model presents the dimensions of the building envelop for maximum profitability of each plot. That way the architect will immediately know the number of floors that leads to the maximum built area, for certain plots. In addition to this, the built blocks images are presented in the screen, as well as corresponding tables and Cartesian graphs. Furthermore, this model can also be used for analyzing city skyline for large urban areas. This analysis can range from a mere visual inspection of the variety of images built blocks will take under different legal constraints, to a more intricate analysis of how city skyline and built area, amongst others, are affected by different the regulations.
keywords	Computing City Shape, Land use performance, Computing city skyline, Urban network design, Computing City Architecture.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	77c8
authors	Wu, Wei and Ng, Edward
year	2001
title	Accuracy and usability of daylighting simulation for designing buildings in urban sites
doi	https://doi.org/10.52842/conf.caadria.2001.211
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 211-216
summary	The unique urban environment of Hong Kong presents designers and students alike unique challenges. Firstly, rules of thumb not longer apply. Secondly, few design tools, mostly developed for low-rise open sites could be used. Advanced computational lighting simulation software could be used to address the design need of information. This study examined the accuracy of two daylighting simulation software: Lightscape and Desktop Radiance, under heavily obstructed urban conditions in Hong Kong. In addition, it evaluates the performance and usability of these two software packages from the designerís perspective. It can be reported that, with due care, both software give reasonably accurate results. However, from the designerís perspective, the look and feel of the two software, and the need for a priori knowledge of lighting design determine their eventual adoptability.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	cf2003_m_026
id	cf2003_m_026
authors	WYELD, Theodor G.
year	2003
title	An Object Server System for 3D Digital Design Collaboration
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 235-248
summary	Moving through and between computer generated 3D objects we experience a 'virtual world'. Virtual Worlds have created a dream-like landscape. They also have facilitated a paradigm shift for architects working with CAD tools where they now desire to “design three-dimensional spaces in an immersed way” (Strehlke and Engeli 2001). Architects are already working in computer-moderated collaborative networked organisations. A 3D Virtual World offers a different kind of collaboration. To understand how architects might design in an 'immersed way', three experiments are described. The experiments attempt to investigate how participants experience the 3D spaces within which they collaborated. In particular, the last experiment makes use of 'shared objects' in the scene. The software chosen to create these Virtual Worlds was VRML and JAVA due to their flexibility and rapid prototyping. Where VRML differs from most CAD languages is in its openness. This paper describes an object sharing client-server architecture based on a simple multi-user system providing navigation in CosmoPlayer 2.11 ported through Netscape. The Object Server System allows multiple clients, as avatars, and objects to be manipulated in a 3D Virtual World. The system updates the transforms of the objects explicitly allowing their transform values to be shared across multiple browser sessions.
keywords	collaboration, multi-user, object sharing
series	CAAD Futures
last changed	2003/09/22 12:21

_id	ga0132
id	ga0132
authors	Abe, Yoshiyuki
year	2001
title	Beyond the math visualization - Geometrica and Stochastica
source	International Conference on Generative Art
summary	Mathematically controlled imaging process provides attractive results because of its infinite scaling capabilities with some other elements that contribute to the visualization. Its global/local and precise manipulation of parameters holds potential for realizing an unpredictable horizon of imagery. When it meets the artist's taste, this method could be a strong enough system of creation, and I have been producing images using the surfaces of hyperbolic paraboloid. On the other hand, a method absolutely free from the geometric parameter manipulation is possible with a stochastic process [1]. Like the technique of pendulum in photography, while its production rate of acceptable result is very low, its potential of generating a strong visual message is also very attractive. It is possible to set stochastic elements at any stage of the process, and conditional probability on those elements, or the hierarchy of probability management characterizes the probability distribution. Math space has no light. No gravity. No color on the math surfaces. And the math equation providesonly the boundary in 3D or higher mathematical dimensions. The fact means that artists can keep artistic reality with their unique tastes in colors on the surface and light sources, and this is the most important element of the math based imaging. Being able to give artists' own choice of colors and that the artist may take only right ones from the results of a stochastic process guarantee the motif and aesthetics of artist could be reflected onto the work.
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:15

_id	1dfa
id	1dfa
authors	Achten, H.H., de Vries, B. and Hennessey, J. (eds.)
year	2001
title	DESIGN RESEARCH IN THE NETHERLANDS 2000 - PROCEEDINGS OF THE SYMPOSIUM, EINDHOVEN MAY 25-26 2000
source	Eindhoven: Eindhoven University of Technology
series	book
type	symposium
email
more	http://www.designresearch.nl/PDF/DRN2000_AchtenDeVriesHennessey_Proceedings.pdf
last changed	2005/10/12 15:28

_id	7897
authors	Achten, Henri and De Vries, Bauke
year	2001
title	Multiple Sketch Users in DDDoolz
source	Stellingwerff, Martijn and Verbeke, Johan (Eds.), ACCOLADE - Architecture, Collaboration, Design. Delft University Press (DUP Science) / ISBN 90-407-2216-1 / The Netherlands, pp. 153-162 [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	This paper presents DDDoolz, a desktop-VR three-dimensional voxel sketchtool. DDDoolz is developed in the Design Systems Group to explore the use of Virtual Reality technology in the early design stage. The aim is to offer a sketch-like environment in VR with an unobtrusive interface. The paper presents DDDoolz, how it is used in education and with partners in architectural practice, and some future developments. As an extension to current functionality, the possibility of multiple users at the same time will be developed in the system for the {ACCOLADE} workshop.
series	other
email
last changed	2001/09/14 21:30

For more results click below: