Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 717

Reformat results as: short short into frame detailed detailed into frame

_id	7134
id	7134
authors	Penttilä, Hannu (Ed.)
year	2001
title	Architectural Information Management [Conference Proceedings]
source	19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1 / Helsinki (Finland) 29-31 August 2001, 578 p.
doi	https://doi.org/10.52842/conf.ecaade.2001
summary	Several common phrases, such as “information society” or “virtual reality” point out the fact that information technology, digital tools and numerous different services via various communication networks have become crucially important factors of our western lifestyle and living environment. The trends of the society reflects naturally the working environments of the construction field, architectural discipline being amongst them. It is almost inconceivable to even imagine an architect without computer-based tools anymore. This evolutional development process has, from historical perspective, only recently started. The process is constantly evolving and rapidly increasing our possibilities to use and enjoy these modern digital fruits. The sometimes unpredictable and rapid changes in our working environment should make architects nervous about the impacts of the changes. All those delicate methods and collective traditions of the several thousand year architectural discipline(!), just simply cannot be transferred into the digital realm in a few decades. Researchers and teachers should very carefully, but still open mindedly, critically explore, analyse and adjust the so-called “modern technology” into the world of architecture, construction, design, planning – and education. We are not just “endusers”, It is we, in fact, who should define what, where and how are we willing to use it(IT). The value of information is constantly growing in our society, and in the future it will evidently be even more so. The value of information is quite hard to define with measurable or agreed concepts, but information evidently contains value-factors. The information which the architects are creating, modifying and manipulating, contains essential and valuable core data concerning the whole built environment of our society. It affects the physical surroundings of our society, in which we will be living for decades – hence, the information has a historical basis. The architectural core information also very strongly affects the quality of life of our fellow citizens – consequently, it has deep social meaning. The essentials of architectural information relies on the tradition of centuries – hence, it clearly has acknowledged cultural values, which are also extremely difficult to quantify. So how could architectural information be described? The information covers a wide range of heterogeneous concepts, items, values, methods, tools, materials, true facts, rumours, intuition and knowledge, plus a multitude of yet undefined or unpredictable factors, which still have to be watched and prepared for. Since the information deals with common and general subjects, it should also be described with common and general concepts. On the other hand as the information is also concerned with the minutiae of specific projects, the architectural information should also be described with well identified and unique entities. With our digital tools we handle all information – including architectural – more and more digitally. We have to handle and manipulate information currently as digital data, which could be understood the ”raw material” of architectural information. Digital data becomes valuable information, when some kind of meaning or purpose to somebody can be attributed to it. In the early gloomy days of ”digital architecture” in the 1960’s and 1970’s, researchers tried to describe architectural artefacts and even design process mathematically. The details of architectural information were quite difficult to describe with binary alphanumeric information of main-frame machines. The architects’ tools development then led to a trend where architects could better represent and visualize the design objects digitally. The widespread and common use of 2D-drawing and 3D-modelling tools is still a very strong trend within our discipline. In fact it is “the way” the majority of architectural information is managed today. During the last 15–20 years, so-called conceptual modelling or product data modelling, done in various technical and construction field research units worldwide, has from one viewpoint clarified the basis and essence of architectural information. Hence, it’s not only CAD-software application development, but also elementary and theoretical research that gives us valuable help to survive among the ever growing seas of terabits of data in the future to come. Architectural information is something that simply cannot be described just with DWG-drawings or dummy scanned photographs any more. Although drawings and photos may contain very important bits of architectural documentation, we need ntimes more “complexity layers”, concepts and tools to manage and understand the essence of architectural information today. A proper way to manage the data we are working with, has to cover the whole architectural discipline. The methods and tools also have to be valid and flexible for several decades in the future.
keywords	Information Management & Data Structuring, Education & Curricula, Modeling & City Planning
series	eCAADe
email
more	http://www.hut.fi/events/ecaade/
last changed	2022/06/07 07:49

_id	avocaad_2001_08
id	avocaad_2001_08
authors	Ivanka Iordanova, Temy Tidafi
year	2001
title	Design assistance by complexity-supporting precedents' modelling
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design processes imply complexity at every stage of the development of a project. On one hand, this complexity is rarely taken into consideration by the currently used CAD programs. On the other hand, recent theoretical researches indicate that a large proportion of architectural design processes are based on precedents as a source of inspiration or as a basis for reflection. A precedent is usually seen as a sketch, as a picture, as a drawing or as a visual memory of an architectural object or space. Recent research enlarges this concept into at least two directions: (1) precedents are looked for not only in the architectural space, and (2) it’s not only the visual aspect of a precedent that is important, but also its internal logic and structure, the know-how associated to it, and the actions needed for its creation. Usually, architectural design knowledge is implicitly presented by precedents. This design knowledge is applied to design-objects having various levels of generality, at different states of detailing and expected to be dynamically transformed during the following stages of design. Having in mind these characteristics of precedents called for during the architectural design process, we propose to join their visual representation with a description of their most important characteristics: structural organisation, way of production, functional organisation, spatial composition, etc. These can be either described or modelled by the original author, or interpreted by the precedent’s ‘user’. These design-knowledge models can be of use in several ways: (1) providing a library for search of precedents by semantic analogy, (2) offering ready-to-use capsules of design knowledge for new design situations, (3) enriching the ‘design world’ of the user-architect. We have implemented the proposed method of complexity-supporting precedents’ modelling by the means of the functional programming SGDL-Scheme language. The models (a programming function or a structure of programming functions) describe the actions necessary for the creation of an object (or its digital representation) and the structural organisation between the models in order to generate new, more complex ones. The concept of describing actions instead of shapes, provides a multi-level applicability of the models. Visual presentations (digital maquettes, images or animations) of newly generated objects can be stored in a visual-library of the assistant, thus creating a new ‘precedent’ that can be referred to in future by visual analogy. The design-knowledge that has generated the new object, is stored and linked to the image. Thus, the visual stimulus of a precedent can be joined with functional characteristics, production procedures and/or semantic meaning of the object. The paper will present the ‘engine’ of the proposed assistant, its organisation, as well as digital models of precedents that have served as a basis for the design of new architectural objects or structures. The assistant is conceived as an open, complexity supporting structure that can be further developed by the ‘user-architect’. We will discuss the advantages and limitations of the proposed assistant.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	679c
authors	Norman, Frederick
year	2001
title	Towards a Paperless Studio
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 336-343
doi	https://doi.org/10.52842/conf.acadia.2001.336
summary	The infusion of digital media into the practice of architecture is changing how we design as well as what we design. Digital media has altered the process of design and the culture of design education. The question before us is how does one transition from a completely analog system of representation to one of complete computer immersion or the “paperless studio”. Schools of Architecture have already begun to struggle with the physical issues of integration of new media (infrastructure and economics). But the pedagogical integration of new media should be of a greater concern. New media and its forms of representation are challenging traditional skills of communication and representation, (i.e., sketching, hand drawing and physical model making). The paradox facing architectural practice today is the integration of new media into a realm where traditional or manual forms of representation are ingrained into how we think, produce and communicate. We must ask ourselves, must new media be held to the traditional forms of representation?
keywords	Digital Media, Design Studio, 3D Modeling, Animation
series	ACADIA
email
last changed	2022/06/07 07:58

_id	ga0132
id	ga0132
authors	Abe, Yoshiyuki
year	2001
title	Beyond the math visualization - Geometrica and Stochastica
source	International Conference on Generative Art
summary	Mathematically controlled imaging process provides attractive results because of its infinite scaling capabilities with some other elements that contribute to the visualization. Its global/local and precise manipulation of parameters holds potential for realizing an unpredictable horizon of imagery. When it meets the artist's taste, this method could be a strong enough system of creation, and I have been producing images using the surfaces of hyperbolic paraboloid. On the other hand, a method absolutely free from the geometric parameter manipulation is possible with a stochastic process [1]. Like the technique of pendulum in photography, while its production rate of acceptable result is very low, its potential of generating a strong visual message is also very attractive. It is possible to set stochastic elements at any stage of the process, and conditional probability on those elements, or the hierarchy of probability management characterizes the probability distribution. Math space has no light. No gravity. No color on the math surfaces. And the math equation providesonly the boundary in 3D or higher mathematical dimensions. The fact means that artists can keep artistic reality with their unique tastes in colors on the surface and light sources, and this is the most important element of the math based imaging. Being able to give artists' own choice of colors and that the artist may take only right ones from the results of a stochastic process guarantee the motif and aesthetics of artist could be reflected onto the work.
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:15

_id	ga0109
id	ga0109
authors	Lewis, Chak Chan
year	2001
title	Defects Defined by Form Making Method for Improving Generative Design System
source	International Conference on Generative Art
summary	Evolutionary-based Generative Design System (GDS) is generally designed for industrial designers during the early stage of conceptual design. Although “additive” Rapid Prototyping (RP) methods are commonly applied for the physical realization, grown Surfaces Object (SO) created from these GDS still has room to be considered to a combined workable volume,especially for the more complex design. The inarticulate processes from GDS to Generative Production System (GPS) are linking up with different aspects and contexts as well as the conventional Computer-Aided Design (CAD)/RP integration, which has been conducted for along time. There are design constraints existing between 3D SO in industry design representation and feasible 3D production solution. Perception to object designing with knowledge is limited at SO forming by incomplete interpretations. Meanwhile, it is difficult to discern the problemsof incomplete object generation as hidden illegal design occurred from time to time because of the design constraints, despite the completion of the design representation. It has led to some of the invalidity of surface feature at the end. The reconstruction of the RP process ofthe SO pre-processing procedure can help to clarify these defects with thickness requirement in generative production. The aim of this paper is to verify an effective generative design strategy as a possibility ofimplementing method(s) or tool. They will be built within a surface-oriented GDS by mapping a valid object directly accepted by any RP system without any influence on generative object creating. Through the involvement of Form Making processes of RP from selected instants with their solid phenomena, evidences are used for defending this viewpoint.Throughout the process, generative design method and CAD method have been utilized for the creation of virtual form. The 3D printer and Fused Deposition Modeling (FDM) technology with “trial and error” method were employed in the RP processes.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	cf2011_p115
id	cf2011_p115
authors	Pohl, Ingrid; Hirschberg Urs
year	2011
title	Sensitive Voxel - A reactive tangible surface
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 525-538.
summary	Haptic and tactile sensations, the active or passive exploration of our built surroundings through our sense of touch, give us a direct feeling and detailed information of space, a sense of architecture (Pallasmaa 2005). This paper presents the prototype of a reactive surface system, which focuses its output on the sense of touch. It explains how touch sensations influence the perception of architecture and discusses potential applications that might arise from such systems in the future. A growing number of projects demonstrate the strong impact of interaction design on the human senses and perception. They offer new ways of sensing and experiencing architectural space. But the majority of these interaction concepts focus on visual and auditory output-effects. The sense of touch is typically used as an input generator, but neglected as as a potential receiver of stimuli. With all the possibilities of sensors and micro-devices available nowadays, there is no longer a technical reason for this. It is possible to explore a much wider range of sense responding projects, to broaden the horizon of sensitive interaction concepts (Bullivant 2006). What if the surfaces of our surroundings can actively change the way it feels to touch them? What if things like walls and furniture get the ability to interactively respond to our touch? What new dimensions of communication and esthetic experience will open up when we conceive of tangibility in this bi-directional way? This paper presents a prototype system aimed at exploring these very questions. The prototype consists of a grid of tangible embedded cells, each one combining three kinds of actuators to produce divergent touch stimuli. All cells can be individually controlled from an interactive computer program. By providing a layering of different combinations and impulse intensities, the grid structure enables altering patterns of actuation. Thus it can be employed to explore a sort of individual touch aesthetic, for which - in order to differentiate it from established types of aesthetic experiences - we have created the term 'Euhaptics' (from the Greek ŒµœÖ = good and Œ¨œÄœÑœâ = touch, finger). The possibility to mix a wide range of actuators leads to blending options of touch stimuli. The sense of touch has an expanded perception- spectrum, which can be exploited by this technically embedded superposition. The juxtaposed arrangement of identical multilayered cell-units offers blending and pattern effects of different touch-stimuli. It reveals an augmented form of interaction with surfaces and interactive material structures. The combination of impulses does not need to be fixed a priori; it can be adjusted during the process of use. Thus the sensation of touch can be made personally unique in its qualities. The application on architectural shapes and surfaces allows the user to feel the sensations in a holistic manner ‚Äì potentially on the entire body. Hence the various dimensions of touch phenomena on the skin can be explored through empirical investigations by the prototype construction. The prototype system presented in the paper is limited in size and resolution, but its functionality suggests various directions of further development. In architectural applications, this new form of overlay may lead to create augmented environments that let inhabitants experience multimodal touch sensations. By interactively controlling the sensual patterns, such environments could get a unique ‚Äútouch‚Äù for every person that inhabit them. But there may be further applications that go beyond the interactive configuration of comfort, possibly opening up new forms of communication for handicapped people or applications in medical and therapeutic fields (Grunwald 2001). The well-known influence of touch- sensations on human psychological processes and moreover their bodily implications suggest that there is a wide scope of beneficial utilisations yet to be investigated.
keywords	Sensitive Voxel- A reactive tangible surface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	34d2
authors	Rottensteiner, Franz
year	2001
title	Semi-automatic extraction of buildings based on hybrid adjustment using 3D surface models and management of building data in a TIS
source	Vienna University of Technology
summary	A new method for semi-automatic building extraction together with a concept for storing building models alongside with terrain data in a topographical information system (TIS) is presented. A user interface based on Constructive Solid Geometry is combined with an internal data structure completely based on boundary representation. Each building can be de-composed into a set of simple primitives which are reconstructed individually. After selecting a primitive from a data base of common building shapes, the primitive parameters can be modified by interactive measurement in digital images in order to provide approximate values for automatic fine measurement. In all phases, the properties of the boundary models are directly connected to parameter estimation: the parameters of the building primitives are determined in a hybrid adjustment of camera co-ordinates and fictitious observations of points being situated on building faces. Automatic fine measurement is an application of a general framework for object surface reconstruction using hierarchical feature based object space matching. The integration of object space into the matching process is achieved by the new modeling technique. The management of both building and terrain data in a TIS is based on a unique principle. Meta data are managed in a relational data base, whereas the actual data are treated as binary large objects. The new method is evaluated in a test project (image scale: 1:4500, 70 % overlap, 50 % side lap). The automatic tool gives results with an accuracy of +-2-5 cm in planimetric position and +-5-10 cm in height.
keywords	Building Extraction; Semi-automatic building extraction; Object modelling; 3D City models; Data acquisition; Spatial Information Systems; Image matching; Photogrammetry
series	thesis:PhD
email
more	http://www.ipf.tuwien.ac.at/fr/buildings/diss/node5.html
last changed	2003/02/12 22:37

_id	3e6a
authors	Wittkopf, Stephen
year	2001
title	I-Light, a webbased learning system for architectural lighting design
source	TU Darmstadt
summary	With the rising meaning of architectural lighting also the requirement at appropriate light planning rises. The possibilities of digital instruments were realized by several lamp manufacturers, which use 3D-CAD to present visualizations and use the Internet for their distribution. However in the field of universities it is important to offer instruments and methods with which the interaction of light and architecture can be learned descriptive, comprehensibly and interactively. Introductory in a theoretical section the bases of light planning and learn-educational concepts are pointed out. Parallel the state of the art in the areas of computer-aided learning and the light simulation is presented and evaluated regarding the learn-educational suitability. Thereupon an action requirement is formulated, which designates a new integration of the individual areas. It flows into the development of an interactive Web-based training system for the design with light - I-Light - whose concept and implementation in the following sections is described. In an application of examples the author points out finally, how this innovative connection of the Internet, 3D-CAD and simulation supports a better understanding of the medium light in the architecture perception. A new virtual light laboratory forms the core of this training system, in which architectural planning examples can be represented three-dimensional and changed interactively. A developed semantic scene model ensures for the fact that lighting, materials and delimitation surfaces are varied didactically appropriately and compared, so that visual effects and important interrelation can be assumed and checked. The author orients itself at the methodology by simulation and merges 3D-CAD and light simulation programs into the training system. The calculated photo-realistic picture is regarded not - as otherwise usual - as presentation material, but as interactive tools. Since 3D-CAD and light simulation programs presuppose much application knowledge, the author does not pursue to confront the user with these complex programs. He developed a new system with a Web-based graphic surface, that enables 3D-scenes to be loaded, be changed and stored easily (front-end). Furthermore it enables the remote control to an automatic, photo-realistic simulation on push of a button on an external high end render machine, that is connected via Internet, where at least all files are externally stored. For the operation of the front-end is only an average PC with a standard Webbrowser necessary. For the receiving station the author develops a new interface, which extends a standard Web server by the new possibility of storing and executing lighting simulations (back-end). The system presented by the author differs in the didactical concept and in the technical implementation from the solutions existing so far in similar areas. The interactive virtual light laboratories of the architectural planning examples represent a new beginning of Web-based learning environments. To the selected tools (HTML, Java, VRML, Web server, Lightscape) there yet exist no matured alternatives.
series	thesis:PhD
email
more	http://elib.tu-darmstadt.de/diss/000131/
last changed	2003/02/12 22:37

_id	9ab2
authors	Yun, Yong Gib
year	2001
title	Structural Composite Members in Architecture Fabricated by CAD/CAE/CAM Technology
source	Harvard University
summary	The doctoral research in this dissertation is aimed at exploring new materials and innovative methods for fabricating complex-shaped buildings, which have surfaced as a prevailing trend in architecture today. Over the past few years, the field of architecture has witnessed revolutionary changes in design. The recent completion of Frank O. Gehry's new Guggenheim Museum in Bilbao, Spain, brought unprecedented attention to complex-shaped, non-conventional designs and its influence on the global architectural trend has been immense. In following these latest trends, the author was drawn to the issues concerning construction materials and methods that are being currently adopted in realizing these complicated designs. It is perhaps inevitable that the traditional steel construction methods, suitable for use in the conventional linear shapes, face tremendous challenges and limitations in building such complex-shaped designs. In the author's opinion, the next step to go from here is to seek joint efforts between the architectural field and the engineering field to search for a new methodology which will best serve the contemporary design style. This research first focused on examining the problems that traditional methods pose for the new complex-shaped buildings. Paying attention to Gehry's recent projects, the author was able to identify major difficulties in association with representing and constructing these complicated shapes, mainly in terms of the relationship between the primary structure and the envelope surface. The second part of the research moved on to proposing a new alternative to the traditional methods, by utilizing polymer composite materials (PCM) as construction material and employing advanced Computer-Aided Design (CAD)/Computer Aided Engineering (CAE)/Computer-Aided Manufacturing (CAM) technologies. More specifically, the author has attempted to present effective theories in support of the two following ideas: (1) circular tubes made of PCM are the most promising alternative to regular steel members, especially steel tubes, to follow the envelope surface of the complex shaped building. (2) state-of-the-art CAD/CAE/CAM technologies are the most essential tools to achieve the geometrical and functional quality of the proposed new material. In the second phase, the primary focus of the quantitative approach was on fabricating an experimental model (1:1 scale prototype) called “ a unit of boundary structures”, the basic unit of structure system that wraps a complex-shaped building's entire territory . (Abstract shortened by UMI.)
series	thesis:PhD
last changed	2003/02/12 22:37

_id	f95f
authors	Angulo, A.H., Davidson, R.J. and Vásquez de Velasco, G.P.
year	2001
title	Digital Visualization in the Teaching of Cognitive Visualization
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 292-301
doi	https://doi.org/10.52842/conf.acadia.2001.292
summary	Professional design offices claim that our graduates have difficulties with their free-hand perspective drawing skills. This fact, which has become obvious over the last 5 years, is parallel to a clear tendency towards the use of 3-dimensional digital imagery in the projects of our students. Frequently, faculty tends to blame the computer for the shortcomings of our students in the use of traditional media, yet there is no clear evidence on the source of the blame. At a more fundamental level, the visualization skills of our students are questioned. This paper will explain how faculty teaching design communication techniques, with traditional and digital media, are working together in the development of a teaching methodology that makes use of computers in support of our student’s training on cognitive visualization skills, namely; “The Third-Eye Method”. The paper describes the Third-Eye Method as an alternative to traditional methods. As evidence of the benefits offered by the Third-Eye Method, the paper presents the results of testing it against traditional methods among freshman students. At the end, the paper draws as conclusion that computers are not the main source of the problem but a potential solution.
keywords	Pedagogy, Visualization, Media
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ec4d
authors	Croser, J.
year	2001
title	GDL Object
source	The Architect’s Journal, 14 June 2001, pp. 49-50
summary	It is all too common for technology companies to seek a new route to solving the same problem but for the most part the solutions address the effect and not the cause. The good old-fashioned pencil is the perfect example where inventors have sought to design-out the effect of the inherent brittleness of lead. Traditionally different methods of sharpening were suggested and more recently the propelling pencil has reigned king, the lead being supported by the dispensing sleeve thus reducing the likelihood of breakage. Developers convinced by the Single Building Model approach to design development have each embarked on a difficult journey to create an easy to use feature packed application. Unfortunately it seems that the two are not mutually compatible if we are to believe what we see emanating from Technology giants Autodesk in the guise of Architectural Desktop 3. The effect of their development is a feature rich environment but the cost and in this case the cause is a tool which is far from easy to use. However, this is only a small part of a much bigger problem, Interoperability. You see when one designer develops a model with one tool the information is typically locked in that environment. Of course the geometry can be distributed and shared amongst the team for use with their tools but the properties, or as often misquoted, the intelligence is lost along the way. The effect is the technological version of rubble; the cause is the low quality of data-translation available to us. Fortunately there is one company, which is making rapid advancements on the whole issue of collaboration, and data sharing. An old timer (Graphisoft - famous for ArchiCAD) has just donned a smart new suit, set up a new company called GDL Technology and stepped into the ring to do battle, with a difference. The difference is that GDL Technology does not rely on conquering the competition, quite the opposite in fact their success relies upon the continued success of all the major CAD platforms including AutoCAD, MicroStation and ArchiCAD (of course). GDL Technology have created a standard data format for manufacturers called GDL Objects. Product manufacturers such as Velux are now able to develop product libraries using GDL Objects, which can then be placed in a CAD model, or drawing using almost any CAD tool. The product libraries can be stored on the web or on CD giving easy download access to any building industry professional. These objects are created using scripts which makes them tiny for downloading from the web. Each object contains 3 important types of information: · Parametric scale dependant 2d plan symbols · Full 3d geometric data · Manufacturers information such as material, colour and price Whilst manufacturers are racing to GDL Technologies door to sign up, developers and clients are quick to see the benefit too. Porsche are using GDL Objects to manage their brand identity as they build over 300 new showrooms worldwide. Having defined the building style and interior Porsche, in conjunction with the product suppliers, have produced a CD-ROM with all of the selected building components such as cladding, doors, furniture, and finishes. Designing and detailing the various schemes will therefore be as straightforward as using Lego. To ease the process of accessing, sizing and placing the product libraries GDL Technology have developed a product called GDL Object Explorer, a free-standing application which can be placed on the CD with the product libraries. Furthermore, whilst the Object Explorer gives access to the GDL Objects it also enables the user to save the object in one of many file formats including DWG, DGN, DXF, 3DS and even the IAI's IFC. However, if you are an AutoCAD user there is another tool, which has been designed especially for you, it is called the Object Adapter and it works inside of AutoCAD 14 and 2000. The Object Adapter will dynamically convert all GDL Objects to AutoCAD Blocks during placement, which means that they can be controlled with standard AutoCAD commands. Furthermore, each object can be linked to an online document from the manufacturer web site, which is ideal for more extensive product information. Other tools, which have been developed to make the most of the objects, are the Web Plug-in and SalesCAD. The Plug-in enables objects to be dynamically modified and displayed on web pages and Sales CAD is an easy to learn and use design tool for sales teams to explore, develop and cost designs on a Notebook PC whilst sitting in the architects office. All sales quotations are directly extracted from the model and presented in HTML format as a mixture of product images, product descriptions and tables identifying quantities and costs. With full lifecycle information stored in each GDL Object it is no surprise that GDL Technology see their objects as the future for building design. Indeed they are not alone, the IAI have already said that they are going to explore the possibility of associating GDL Objects with their own data sharing format the IFC. So down to the dirty stuff, money and how much it costs? Well, at the risk of sounding like a market trader in Petticoat Lane, "To you guv? Nuffin". That's right as a user of this technology it will cost you nothing! Not a penny, it is gratis, free. The product manufacturer pays for the license to host their libraries on the web or on CD and even then their costs are small costing from as little as 50p for each CD filled with objects. GDL Technology has come up trumps with their GDL Objects. They have developed a new way to solve old problems. If CAD were a pencil then GDL Objects would be ballistic lead, which would never break or loose its point. A much better alternative to the strategy used by many of their competitors who seek to avoid breaking the pencil by persuading the artist not to press down so hard. If you are still reading and you have not already dropped the magazine and run off to find out if your favorite product supplier has already signed up then I suggest you check out the following web sites www.gdlcentral.com and www.gdltechnology.com. If you do not see them there, pick up the phone and ask them why.
series	journal paper
email
last changed	2003/04/23 15:14

_id	avocaad_2001_06
id	avocaad_2001_06
authors	Giovanni De Paoli
year	2001
title	Architectural design and procedural models - A radical change of language to design in architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The history of architecture and its teaching clearly reveal how representations of the image and drawing have changed over centuries. Today, computers are increasingly found at the desks of architecture professionals and students, but their usage remains restricted to technical functions and what is commonly known as CAD (computer-assisted design), in architecture is often simply the other CAD (computer-assisted drawing).This presentation deals with architectural design, particularly at its earliest stage. Our objective is to propose a model for describing the architectural concept that meets the needs of architects through software. Only then will they really be able to use computers as an aid to design by overcoming the obstacles that presently keep us from making full use of them.This has led me to propose an avenue of exploration that examines projection through an object’s properties, and a method of computer-assisted design that makes use of procedural models. These procedural models consist of geometric operators and operators that define the properties, characteristics and performance of a building — operators which I have termed “semantic”.This research fits into a paradigm that leads to representation of the building through functions that can be called with parameters and encapsuled in an algorithm, making it possible to create procedural models that assist with the design. This approach opens up a means of integrating the logos with the figurative representation where drawing is used instead of words to convey the architectural concept.The example of a procedural model shows how we can use a generic model to produce a volume model with all the characteristics belonging to the same family of objects. This type of model can serve not only to illustrate the result of a process, or to draw connections among buildings on the basis of their construction process, or to test the validity of a rule typical of a set of objects, but also to integrate, through a functional language, semantic operators which to date have been excluded from the initial design phase. This descriptive mechanism is extremely powerful in making it possible to establish relationships among the functions and properties of a building and the purpose of the architectural project.The scientific contribution of this research is to test the hypothesis that we can use computer tools to manipulate operators which enable the architect to reappropriate a complex design of the building, and open up new lines of investigation into integrating geometric and knowledge-based systems into a unified representation. The declarative approach for creating three-dimensional scenes fits into this perspective.It is now a matter of exploring the possibility of working on a “common morphology” shared by everyone involved in the design process by rewriting the functions or by converting the functions used for representation, or else through a functional dialect (language) that allows for dialectic relationships among all types of operators and the actions of the protagonists in the architectural design process.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	603d
authors	McCall, R., Vlahos, E. and Zabel, J.
year	2001
title	Conceptual Design as HyperSketching. Theory and Java Prototype
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 285-297
summary	Hand-done design drawing still has a several advantages over current, CADbased approaches to generating form, especially in the early stages of design. One advantage is the indeterminacy of hand drawing--i.e. its abstractness and ambiguity. Another is a non-destructive drawing process, where new drawings are created without modifying old ones. A third is designers’ creation of large collections of inter-related drawings--i.e. graphical hyperdocuments. A fourth is the unobtrusive character of conventional drawing tools. These advantages might be taken as reasons for continuing to do early design on paper, but they also suggest ways in which CAD might be improved. We have created software prototypes that incorporate these features into a new type of CAD based on sketching with electronic pens on LCD tablets. One prototype, which we call HyperSketch II, simulates tracing paper in the sense that it enables the user to trace over previous drawings and to build stacks of traced over drawings. It also enables the user to create a hypermedia network in which the nodes are sketches and the links represent various relationships between sketches.
keywords	Sketching, Hypertext, Hypermedia, Conceptual Design
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	6df6
authors	Pratini, Edison
year	2001
title	New Approaches to 3D Gestural Modeling - The 3D SketchMaker Project
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 466-471
doi	https://doi.org/10.52842/conf.ecaade.2001.466
summary	The 3D SketchMaker project has developed two prototypes for a gestural 3D sketching system to be used in the earliest phases of the design process. The goal of this ongoing research is to provide architects, and other designers involved in object conception, with a 3D gestural instrument that takes advantage of new virtual reality resources and is more natural than using the mouse, less difficult than learning complex software and less abstract than manipulating 2D entities on orthogonal projections. The system was conceived to assist or replace the first 2D drawing steps in the design process, generating rough 3D sketches that can be refined later using any 3D package. It is, in essence, a 3D modeling system directed to do sketching with hand movements and gestures in a virtual reality environment.
keywords	Gestural Interface, Virtual Reality, 3D Modeling, Sketching
series	eCAADe
last changed	2022/06/07 08:00

_id	51a0
authors	Conti, G., Ucelli, G. and Maver, T.
year	2001
title	JCAD-VR: Java Collaborative Architectural Design Tool in Virtual Reality - A Java3D based scalable framework for real-time, multiplatform VR environments
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 454-459
doi	https://doi.org/10.52842/conf.ecaade.2001.454
summary	This paper proposes a framework that provides the architect with a tool that uses Virtual Reality (VR) as part of the design path. It offers the possibility to deploy a system capable of assisting the design profession during the early stages of the design process. This way VR becomes the means for a new experience where the architect can, free from constraints of the 2D world, create and manipulate the space she/he is designing. The idea upon which JCAD-VR is being built is that all the users present in the virtual world have to be able to share the same virtual environment in a “transparent fashion” where the user interface, instead of the traditional menu/windows based layout, it is part of the virtual world itself. The aim is to provide the designer with a tool for creating 3D-shapes in a shared VR environment, thus allowing the design to be shared as it evolves.
keywords	Collaborative Design, Virtual Reality, Java 3D, Distributed Environment
series	eCAADe
email
last changed	2022/06/07 07:56

_id	d3d4
authors	Sato, Tomoya and Hagiwara, Masafumi
year	2001
title	IDSET: Interactive Design System using Evolutionary Techniques
source	Computer-Aided Design, Vol. 33 (5) (2001) pp. 367-377
summary	In this paper, we propose a tool-creating support system named IDSET (Interactive Design System using Evolutionary Techniques). Two kinds of Stages are used in theproposed IDSET: Stages where fundamental shapes are generated and Stages where they are combined. At each Stage, new shapes are generated by the system usingevolutionary techniques, and they are shown to the user. The user's creativity is stimulated by this process. Since the system begins with creating parts instead of usingparts that are prepared in advance, various novel tools can be formed. The user only has to evaluate the displayed tools, not to have to make them. A system to create toolsthat are composed of two fundamental parts has been implemented as an example of the proposed system. Computer experiments have been carried out, and various toolsand artistic shapes have been created. Some shapes which human beings could not easily envisage were included in the created shapes. This underlines the effectiveness ofthe proposed IDSET.
keywords	Interactive Design, Evolutionary Techniques, Tool-Creating Support System
series	journal paper
last changed	2003/05/15 21:33

_id	048f
authors	Cheng, Ron K.C.
year	2001
title	Inside Rhinoceros
source	OnWord Press
summary	Master the ins and outs of building curved surfaces and organic shapes while sharpening your knowledge of the mathematics used in contemporary computer-aided engineering applications. Inside Rhinoceros provides readers with an all-inclusive introduction to 3D computer modeling using the newest release of Rhinoceros - Rhino™, Release 2 - with special emphasis on understanding NURBS surfaces and boundary-representation methods.
series	other
last changed	2003/02/26 18:58

_id	avocaad_2001_07
id	avocaad_2001_07
authors	Stefan Wrona, Adam Gorczyca
year	2001
title	Complexity in Architecture - How CAAD can be involved to Deal with it. - "Duality"
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	“Complexity “ is for us a very ambigous notion. It may be understood in two contexts.1.Thorough solution of a problem.Complexity means full recognition of design area, followed by appropriate work. That work must be thorough and interdisciplinary – if necessary, separated to different co-operatives. These trade designers reqiure a branch coordination and – the most important- all of them must have a „common denominator”. Such as a proper CAAD platform and office standards. That will reduce costs of changes, improve an interplay between designers and somtimes enable to face up a new challenge.Nowadays architects are no longer “solitary” individualists working alone – they must concern a team – they become a member, a part of a huge design machine. “Import/export”, compatibility, interplay – these words must appear and we have to put a stress on them. How to organize work for different trade-designers? How to join in common database architectural design ,engineering design, HVAC design, electricity design, technology design, computer network design and all other trades ?...A key to solve this range of problems is in good work organization. Universal prescription does not exist, but some evergreen rules can be observed. We are going to present a scheme of work in CAAD application ALLPLAN FT v.16 with a Group manager , which starts to conquest polish market and is widely spread in Germany. “Golden rules” of ALLPLAN FT There is one database – it is placed on server. It includes all projects. There is a well-developed office standard. It must be created at the beginning of collaboration, although it is possible to improve it later. It consist of hatches, fonts, symbols, macros, materials, pen-widths, and – the most important –layers . A layer set – predefined structure divided into functional groups – e.g. drafting, text, dimensioning, architecture, HVAC, engineering, urban design, etc.That stucture is a part of an office standard – all workers use a relevant part of it. No name duplicates, no misunderstandings... If however design extends, and a new group of layers is required, it can be easily added, e.g. computer networks, fireguard systems. Administrator of ALLPLAN network defines different users and gives them different permitions of access. For example – an electrician will be able to draft on layer “electricity”, but he won’t modify anything at layer “architecture – walls”, and he won’t even see a layer “engineering- slabs”, because he doesn’t need it..At the same time our electrician will be able to see , how architect moves some walls and how HVAC moved and started to cross with his wires. Every user is able to see relevant changes, after they are saved by author. Two different users can not access at the same time the same file. That excludes inconsistent or overlapping changes . All users operate on a 3D model. While putting some data into a model, they must remember about a “Z” coordinate at work-storey. But at the same time all create a fully-integrated, synchronous database, which can be used later for bills of quantities, specifications, and – of course – for visuaisation. That method can be described as “model-centric”. To simplify complex structure of architectural object -ALLPLAN offers files. Usually one file means one storey, but at special designs it might become a functional part of a storey, or whatever you wish. Files connected with layers easy enable to separate certain structural elements, e.g. if we want to glance only at concrete slabs and columns in the building – we will turn on all files with “layer filter” – “slabs” and “columns”. ALLPLAN is of course one of possible solutions. We described it , because we use it in our workshop. It seems to be stretchy enough to face up every demand and ever-increasing complexity of current projects. The essence of the matter, however, is not a name or version of application – it is a set of features, we mentioned above, which allows to deal with EVERY project. The number of solutions is infinite.2. Increasing difficulties during design process. It may be associated with more and more installations inside of new buildings, especially some “high-tech” examples. The number of these installations increases as well as their complexity. Now buildings are full of sensors, video-screens, computer networks, safety-guard systems... Difficulties are connected with some trends in contemporary architecture, for example an organic architecture, which conceives “morphed” shapes, “moving” surfaces, “soft” solids. This direction is specially supported by modelling or CAD applications. Sometimes it is good – they allow to realize all imaginations, but often they lead to produce “unbuildable” forms, which can exist only in virtual world.Obstacles appear, when we design huge cubatures with “dense” functional scheme. Multi-purposed objects, exhibition halls, olimpic stadium at Sydney – all of them have to be stretchy, even if it requires sliding thousands pound concrete blocks! Requirements were never so high.The last reason, why designs become so complex is obvious - intensifying changes due to specific requirements of clients/developers.We could say “ signum tempori” – everything gets more and more complicated , people have to become specialists, to face up new technology. But how CAAD can help us with it? How?! We have already answered that question. Sometimes CAAD is the only way to imagine and sketch something, to visualize something, to compute a construction , to prepare a simulation... So that human must “only” interprete ready solutions. Sometimes CAAD help us to notify a problem. It works exactly in the same way, as spy-glasses does. For example – without a real-time visualization we we would have never realised (until finished!) some strange interference of solids, which have occured in the upper roof part of our new appartment-house.ConclusionsTemporary CAAD is an integral part of design process – not only as a tool, but sometimes as an inspiration. It helps to organize our work, to define problems, to filter relevant elements and to render our visions. It becomes an integral part of our senses – and that will be a real complexity in architecture...
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	af65
authors	Akleman, E., Chen, J. and Sirinivasan, V.
year	2001
title	An Interactive Shape Modeling System for Robust Design of Functional 3D Shapes
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 248-257
doi	https://doi.org/10.52842/conf.acadia.2001.248
summary	In Architecture, it is essential to design functional and topologically complicated 3D shapes (i.e. shapes with many holes, columns and handles). In this paper, we present a robust and interactive system for the design of functional and topologically complicated 3D shapes. Users of our system can easily change topology (i.e. they can create and delete holes and handles, connect and disconnect surfaces). Our system also provide smoothing operations (subdivision schemes) to create smooth surfaces. Moreover, the system provides automatic texture mapping during topology and smoothing operations. We also present new design approaches with the new modeling system. The new design approaches include blending surfaces, construction of crusts and opening holes on these crusts.
keywords	Modeling, Shape Design, Sculpting, Computer Aided Geometric Design
series	ACADIA
email
last changed	2022/06/07 07:54

_id	avocaad_2001_03
id	avocaad_2001_03
authors	M.K.D. Coomans, J.P. van Leeuwen, H.J.P. Timmermans
year	2001
title	Abstract but Tangible, Complex but Manageable
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the VR-DIS research program, an innovative design-information modelling technique has been proposed that is based on features. In this modelling technique, the designer is invited not only to model the form and spatial aspects of his or her design, but also to model the structure of the data behind the design. The designer is offered a way to control how abstract design data is structured and stored. In this way, the designer is given the power to model concepts like conformity, contrast, and scale on the formal data level, and this for both graphical and non-graphical design characteristics. Further, the designer is invited to input formal descriptions of own design concepts, and use these personal concepts during the design process. With this new information modelling technique, we expect that the designers will be better capable to handle the complexity of linking diverse kinds of information involved in a design process. This new way of computer aided design offers a unique design freedom: any design concept becomes addressable. On the other hand, this technique also puts the responsibility for the content of the CAD database entirely in the hands of the designer. In order to be able to enjoy the design freedom fully and at the same time handle the responsibility over the design database, a computer tool is needed that shows the precise content of the database, and that is easy and quick to interact with. Only with such a tool, the designer will be capable of keeping the complex data model in pace with his or her design reasoning. To realise this requirement, a “feature browser” has been developed with a 3D graphical user interface. It shows the data objects as 3D blocks, mutually linked by rubber-band arrows that closely reflect the database structure. The whole forms an interactive 3D graph. The intuitiveness and user friendliness of the interface was improved by adding features like the visualisation of the browsing history, the visualisation of link-semantics, and animated visual feedback effects. The hardware part of the interface is worked out as a Fish Tank VR set-up. This hardware configuration improves the experienced realism of the displayed 3D objects up to a feeling of physical presence. The interface as a whole therefore provides a highly attractive display of the abstract design data; abstract but tangible. It is a tool in which complex data structures can be explored and controlled: complex but manageable.
series	AVOCAAD
email
last changed	2005/09/09 10:48

For more results click below: