Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 717

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_18
id	avocaad_2001_18
authors	Aleksander Asanowicz
year	2001
title	The End of Methodology - Towards New Integration
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The present paper is devoted to the deliberation on the genesis and development of designing from the point of view of the potential use of computers in the process. Moreover, it also presents the great hopes which were connected with the use of the systematic designing methods in the 1960’s, as well as the great disappointment resulting from the lack of concrete results. At this time a great deal of attention was paid to the process of design as a branch of a wider process of problem-solving. Many people believed that the intuitive methods of design traditionally used by architects were incapable of dealing with the complexity of the problems to be solved. Therefore, the basic problem was the definition of a vertical structure of the designing process, which would make it possible to optimise each process of architectural design. The studies of design methodology directed at the codification of the norms of actions have not brought about any solutions which could be commonly accepted, as the efforts to present the designing process as a formally logical one and one that is not internally “uncontrary” from the mathematical point of view, were doomed to fail. Moreover, the difficulties connected with the use of the computer in designing were caused by the lack of a graphic interface, which is so very characteristic of an architect’s workshop. In result, the methodology ceased to be the main area of the architect’s interest and efforts were focused on facilitating the method of the designer’s communication with the computer. New tools were created, which enabled both the automatic generation of diversity and the creation of forms on the basis of genetic algorithms, as well as the presentation of the obtained results in the form of rendering, animation and VRML. This was the end of the general methodology of designing and the beginning of a number of methods solving the partial problems of computer-supported design. The present situation can be described with the words of Ian Stewart as a “chaotic run in all directions”. An immediate need for new integration is felt. Cyber-real space could be a solution to the problem. C-R-S is not a virtual reality understood as an unreal world. Whilst VR could be indeed treated as a sort of an illusion, C-R-S is a much more realistic being, defining the area in which the creative activities are taking place. The architect gains the possibility of having a direct contact with the form he or she is creating. Direct design enables one to creatively use the computer technology in the designing process. The intelligent system of recognising speech, integrated with the system of virtual reality, will allow to create an environment for the designer – computer communication which will be most natural to the person. The elimination of this obstacle will facilitate the integration of the new methods into one designing environment. The theoretical assumptions of such an environment are described in the present paper.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_13
id	avocaad_2001_13
authors	Alexander Koutamanis
year	2001
title	Modeling irregular and complex forms
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Computational technologies provide arguably the first real opportunity architectural design has had for a comprehensive description of built form. With the advent of affordable computer-aided design systems (including drafting, modeling, visualization and simulation tools), architects believe they can be in full control of geometric aspects and, through these, of a wide spectrum of other aspects that are implicit or explicit in the geometric representation. This belief is based primarily on the efficiency and effectiveness of computer systems, ranging from the richness and adaptability of geometric primitives to the utility of geometric representations in simulations of climatic aspects. Such capabilities support attempts to design and construct more irregular or otherwise complex forms. These fall under two main categories: (1) parsing of irregularity into elementary components, and (2) correlation of the form of a building with complex geometric structures.The first category takes advantage of the compactness and flexibility of computational representations in order to analyse the form of a design into basic elements, usually elementary geometric primitives. These are either arranged into simple, unconstrained configurations or related to each other by relationships that define e.g. parametric relative positioning or Boolean combinations. In both cases the result is a reduction of local complexity and an increase of implicit or explicit relationships, including the possibility of hierarchical structures.The second category attempts to correlate built form with constraints that derive usually from construction but can also be morphological. The correlation determines the applicability of complex geometric structures (minimally ruled surfaces) to the description of a design. The product of this application is generally variable in quality, depending upon the designer's grounding in geometry and his ability to integrate constraints from different aspects in the definition of the design's geometry.Both categories represent a potential leap forward but are also equally hampered by the rigidity of the implementation mechanisms upon which they rely heavily. The paper proposes an approach to making these mechanisms subordinate to the cognitive and technical aspects of architectural thinking through fuzzy modeling. This way of modeling involves a combination of (a) canonical forms, (b) tolerances around canonical forms and positions, (c) minimal and maximal values, (d) fuzzy boundaries, and (e) plastic interaction between elements based on the dual principles of local intelligence and autonomy. Fuzzy models come therefore closer to the intuitive manners of sketching, while facilitating transition to precise and complex forms. The paper presents two applications of fuzzy modeling. The first concerns the generation of schematic building layouts, including adaptive control of programmatic requirements. The second is a system for designing stairs that can adapt themselves to changes in their immediate environment through a fuzzy definition of geometric and topological parametrization.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	22ec
authors	Bechthold, Martin
year	2001
title	Complex shapes in wood: Computer-aided design and manufacture of wood-sandwich roof shells
source	Harvard University
summary	Computer-Aided-Design, Engineering and Manufacturing (CAD/CAE/CAM) technology has changed the way consumer products, automobiles or airplanes are designed and made. The emerging applications for CAD/CAE/CAM technology in architecture, and the way this technology impacts how we design and construct the built environment, are yet unclear. This thesis investigates the relation between advanced digital design tools and the making of physical objects by focusing on an exemplary architectural element—wooden roof shells. The research objective is to expand the scope of architectural design through the application of CAD/CAE/CAM technology rather than to use this technology to streamline existing processes. The thesis develops a specific technical solution that allows the design and manufacture of new types of wooden roof shells. These are complexly shaped multifunctional construction elements that are manufactured off-site. Based on the close connection between digital design tools and the new Computer-Numerically-Controlled manufacturing process the author proposes a theoretical model of shared digital environments for collaborative design in architecture. The proposed manufacturing process treats wood as a modern composite material. Thin wood strips and foams combine into structural sandwich panels that can then be joined into a roof shell. The geometrically complex panels are generated by a combination of subtractive Computer-Numerically-Controlled machining processes and manual work. Infrastructure elements can be embedded into the sandwich build-up in order to enhance the functionality of the roof as a building envelope. Numerical tools are proposed that allow the determination of manufacturing-related parameters in the digital design environment. These inform the architectural and structural design in the early design phases. The digital collaborative design environment is based on a shared parametric solid model and an associated database. This collectively owned, feature-based design model is employed throughout the design and manufacturing process and constitutes the means of concurrent design coordination of all participants. The new manufacturing process for wood/foam sandwich shells is verified by designing and manufacturing prototypes. Design guidelines and a cost estimation are presented as the practical basis for architects and engineers to incorporate new types of roof shells into architectural projects.
keywords	Architecture; Agriculture; Wood Technology; Design and Decorative Arts
series	thesis:PhD
last changed	2003/02/12 22:37

_id	7ffb
authors	Ciftcioglu, Özer and Durmisevic, Sanja
year	2001
title	Knowledge management by information mining
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 533-545
summary	Novel information mining method dealing with soft computing is described. By this method, in the first step, receptive fields of design information are identified so that connections among various design aspects are structured. By means of this, complex relationships among various design aspects are modeled with a paradigm, which is non-parametric and generic. In the second step, the structured connections between various pairs of aspects are graded according to the relevancy to each other. This is accomplished by means of sensitivity analysis, which is a computational tool operating on the model established and based on a concept measuring the degree of dependencies between pairs of quantities. The degree of relationships among various design aspects so determined enables one to select the most important independent aspects in the context of design or decision-making process. The paper deals with the description of the method and presents an architectural case study where numerical and as well as non-numerical (linguistic) design information are treated together, demonstrating a ranked or elective information employment which can be of great value for possible design intervention during reconstruction.
keywords	Knowledge Management, Information Mining, Sensitivity Analysis
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	ecaade2023_221
id	ecaade2023_221
authors	Imam, Chowdhury Ali and Ligler, Heather
year	2023
title	3D Voxel Grammar of Mangalabas (Goodwill House)
doi	https://doi.org/10.52842/conf.ecaade.2023.2.441
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 441–450
summary	Mangalabas (Goodwill House) is a historic multi-court mansion in Farashganj, Old Dhaka, Bangladesh. The spatial layout combines multiple courtyards, demonstrating how the courtyard is an integral part of traditional Bengali houses and vernacular buildings. During the British colonial period, Mangalabas and many other multi-court mansions were built in Dhaka by combining the native spatial organization of courtyard buildings with imported European elements (Rahmam and Haque, 2001). This typology is unique to Bangladesh and offers configurations with spatial, social, and environmental values that are often missing from contemporary housing in Dhaka. This paper revisits the vernacular essence of Bengali courtyard-based living and presents a 3D voxel-based interpretation of Mangalabas to promote the potential of this building form. The research focuses on inferring shape rules of the volumetric composition to understand the programmatic relations between the courtyards and overall massing. Voxels are used to represent these relationships in a straightforward way and to strategize for the computer implementation of grammar in future work. The current study sets a foundation for understanding this Bengali housing type and the logic of its building form as a basis for designing new housing prototypes that learn from this vernacular.
keywords	Shape Grammar, Voxel Grammar, Courtyard, Colonial Architecture
series	eCAADe
email
last changed	2023/12/10 10:49

_id	47a5
authors	Mourshed, M.M., Kelliher, D. and Keane, M.
year	2001
title	Spatial Representation in Product Modelling
source	Proceedings of the IEEE International Conference on Information Visualisation, IV 2001, London, UK
summary	An unambiguous definition of space is necessary before any attempt made to develop product or process models for concurrent engineering in the AEC Industry. The ambiguity is the result of different and even conflicting approach to its definition in the various phases of the building life cycle for different stakeholders, e.g. Architects, Engineers, and Building Services Engineer etc. Some researchers consider space as an abstract property of things, while others consider as a thing itself. Regardless of the definition, the space can be referred to as a collector of material objects and also as an object itself. This paper investigates the existing concepts & criteria of definition in various phases, compares with the factual and ontological meaning, and specifies conceptual schemas for representation of space, geometry, and buildings.
keywords	Building Product Models; Space; IFC; STEP
series	other
email
last changed	2003/03/31 19:49

_id	5779
authors	Osman, Yasser S.
year	2001
title	Shape studies: Remodeling Bilbao museum
doi	https://doi.org/10.52842/conf.caadria.2001.337
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 337-341
summary	This paper is a study of shape, attempting to understand the effect of computer-aided architectural drafting and design on the geometry of form. This study also is a part of larger question: When the tools of presentation change, does form generation necessarily change as well? The study is in two parts: Remodeling Bilbao Museum and Editing a Cube.
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	9e31
authors	Osman, Yasser
year	2001
title	The Use of Tools in the Creation of Form: Frank (L. Wright & O. Gehry)
doi	https://doi.org/10.52842/conf.acadia.2001.044
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 044-051
summary	This paper is a study of shape, attempting to understand the effect of Computer Aided Architecture Drafting and Design on the Geometry of Form. This is a part of a larger question: When the tool of presentation changes, does the form generated change as well? The study is in two main parts: 1 Comparing two Guggenheim Museums. 2 Re-Modeling Bilbao Museum. The final questions are: why does form become more complex? How do architects use tools to obtain more complexity? What Computer Aided Architecture Design programs let architects achieve more complexity? For an architect, is the motivation to demonstrate a set of 3D geometric operations sufficient to generate complex assemblies, and are there other possible operations needed?
keywords	Form, Tool, Digital, Model
series	ACADIA
email
last changed	2022/06/07 08:00

_id	ga0113
id	ga0113
authors	Riley, Howard
year	2001
title	Drawing as Transformation: From Primary Geometry to Secondary Geometry
source	International Conference on Generative Art
summary	A distinction is made between primary geometry, the arrangement in space of lines of projection from a 3-D object to a plane of projection, and secondary geometry, the relationships between the points, lines and shapes of the drawn projection on a 2-D surface. Drawing projection systems, such as those classified under British Standard 1192, are illustrated, and are shown to be defined in terms of primary geometry. It is argued that a re-classification of projection systems in terms of secondary geometry enables first-year students of drawing to relate more easily such systems of geometry to their observational experiences. Student drawings illustrate the argument.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	cb8e
authors	Vegte, W.F. van der, Pulles, J.P.W. and Vergeest, J.S.M.
year	2001
title	Towards computer-supported inclusion and integration of life cycle processes in product conceptualization based on the process tree
source	Automation in Construction 10 (6) (2001) pp. 731-740
summary	Development of computer support in design is showing several shifts in focus over the latest decades. This paper relates to the shifts from detail design to conceptualization, from artifact geometry definition only to the inclusion of process knowledge, and from isolated aspects to integrated aspects. It discusses a possible solution for simultaneous consideration of life cycle process aspects during conceptual design using the process tree representation. Integrating process aspects can be considered a preparation for an integrated representation of artifact and process aspects to be used in a front–end environment for conventional CAD detailing systems
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	avocaad_2001_14
id	avocaad_2001_14
authors	Adam Jakimowicz
year	2001
title	Non-Linear Postrationalisation: Architectural Values Emergence in a Teamwork Interpretation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The paper presents the outcomes of the experiment being conducted at the Faculty of Architecture in Bialystok, which derives form three main sources: a new course of architectural composition by computer modelling, developed and conducted in Bialystok postrationalisation as a formulation platform for new architectural values and theories, applied by e.g. Bernard Tschumi the idea of new values emergence resulting form a teamwork, when placed in an appropriate environment; It is assumed that the work performed first intuitively, can be later seriously interpreted, and to some extent rationalised, verbalised, described. With no doubt we can state, that in creative parts of architectural activities, very often decision are taken intuitively (form design). So this ‘procedure’ of postrationalisation of intuitively undertaken efforts and results seems to be very important –when trying to explain ideas. This kind of activity is also very important during the first years of architectural education. In case of this experiment, the students’ works from the course of architectural composition are taken as a base and subjects for interpretation, and values research. However, when at first, individual works are being interpreted by their authors, at the latter stage, the teams are to be formed. The aim of the teamwork is to present individual works, analyse them, find common value(s), and represent it (them) in an appropriate, creative way. The ideal environment to perform this work is hypertext based internet, because the non-linearity of team interpretations is unavoidable. On the other hand, the digital input data (computer models) is a very appropriate initial material to be used for hypermedia development. The experiment is to analyse the specific of the following: the self-influence of the group on the individual work ‘qualification’, mutual influence of the team members on their own work interpretation, the influence of the digital non-linear environment on the final outcome definition. The added value of hypertext in architectural groupwork digital performance shall be examined and described. A new value of individualised, though group based, non-linearity of expression will be presented and concluded.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	db60
authors	Af Klercker, J., Achten, H. and Verbeke, J.
year	2001
title	AVOCAAD - A First Step Towards Distance Learning?
doi	https://doi.org/10.52842/conf.ecaade.2001.269
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 269-274
summary	In the industrial world knowledge is developed very fast. As most countries are depending on employees with a high level of knowledge and skills the term ”Life Long Learning” has been formulated and the concept is more and more accepted. Institutions of higher education are more and more involved in creating supplementary education more independent of time and place. Distance learning was originally carried out by ordinary mail, which was slow but might then have been the only solution for people in remote places. With the Internet and e-mail the distance-learning concept has got a far better tool, for instance better interaction facilities. Architects and engineers in practise are deeply involved in solving the problems of the present projects. Education which is independent of time and place must be of great interest to both parties. The AVOCAAD project has created an education model for students to meet the possibilities of CAAD. The education model can be used in a curriculum at a school as well as for distance learning. Among the possible experiences from it, the one concerning distance learning might be the most important future application of the system in architectural education. This paper sketches the pedagogical background and gives examples from other areas of knowledge, where distance learning is already in use. We will put the question how the AVOCAAD concept meets the experiences from distance learning.
keywords	Distance Learning, Pedagogic, CAAD, E-Learning, AVOCAAD
series	eCAADe
email
last changed	2022/06/07 07:54

_id	7501
authors	Apley, Julie
year	2001
title	A Virtual Reconstruction: Isthmia Roman Bath
doi	https://doi.org/10.52842/conf.acadia.2001.410
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 410-411
summary	The Isthmia Roman Bath is located in Greece overlooking a great ravine on the Isthmus of Corinth. It was in use during the 2nd through the 4th centuries. I have created a 3D VRML walkthrough of the ancient bath. This interdisciplinary project utilizes the research of an archaeologist, architect, and art historian. Because the researchers live in different locations, it made sense to use the Internet as a research tool. When clicking on the numbers on the home page, you can see the process that I went through to model the Roman Bath. After seeing the images, the researchers were able to visualize their research, reply to questions, and re-evaluate their findings. VRML promises an accessible, highly visual, and interactive representation of difficult to see data, opening up new ways of presenting research. It is possible to walk within the bath by clicking on the Virtual Reconstruction link. When in the "Entrance view", click on the vase to see a map of the ruin. There are three places within the project that link to the existing excavated site. Links are also available to walk outside. The project runs best on Windows NT using Netscape. You must have the plug-ins for Cosmoplayer (VRML) and Quicktime (movie). Because the VRML plug-in doesn't work as well on a Mac, it is possible that you may only be able to view the images and movie from the project.
series	ACADIA
last changed	2022/06/07 07:55

_id	ddss2004_ra-177
id	ddss2004_ra-177
authors	Ballas, D., R. Kingston, and J. Stillwell
year	2004
title	Using a Spatial Microsimulation Decision Support System for Policy Scenario Analysis
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 177-191
summary	This paper discusses the potential of a spatial microsimulation-based decision support system for policy analysis. The system can be used to describe current conditions and issues in neighbourhoods, predict future trends in the composition and health of neighbourhoods and conduct modelling and predictive analysis to measure the likely impact of policy interventions at the local level. A large dynamic spatial micro-simulation model is being constructed for the population of Leeds (approximately 715,000 individuals) based on spatial microsimulation techniques in conjunction with a range of data, including 2001 Census data for Output Areas and sample data from the British Household Panel Survey. The project has three main aims as follows: (i) to develop a static microsimulation model to describe current conditions in Leeds; (ii) to enable the performance of ‘What if?’ analysis on a range of policy scenarios; and (iii) to develop a dynamic microsimulation model to predict future conditions in Leeds under different policy scenarios. The paper reports progress in meeting the above aims and outlines the associated difficulties and data issues. One of the significant advantages of the spatial microsimulation approach adopted by this project is that it enables the user to query any combination of variables that is deemed desirable for policy analysis. The paper will illustrate the software tool being developed in the context of this project that is capable of carrying out queries of this type and of mapping their results. The decision support tool is being developed to support policy-makers concerned with urban regeneration and neighbourhood renewal.
keywords	Spatial Microsimulation, Spatial Decision Support Systems, Geotools
series	DDSS
last changed	2004/07/03 22:13

_id	444b
authors	Barrionuevo, Luis F.
year	2001
title	Positioning of Buildings in a Land
doi	https://doi.org/10.52842/conf.ecaade.2001.493
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 493-499
summary	Configurational studies are useful tools to architectural designing, since they help to understand the grouping of objects in the space (two-dimensional and/or threedimensional). The designer, after a classification of objects that satisfies the needs set to a group of objects, impose some restrictions to the objects that will govern the composition. These restrictions are those that will define the result through operations carried out by the designer. Among these operations the location of buildings in a determined area and the particular environmental qualities condition the final result. This work presents the results obtained by means of the implementation of a computing program of the type Evolution Program (EP) implemented in language C. The implementation of the program is explained in the first part of the paper. In the second part the successive steps are described. The numerical results obtained with the mentioned program are shown graphically. Examples of different complexity level illustrate the discussion of the theoretical matters.
keywords	Positioning Buildings, Configurational Studies, Evolutionary Design, Evolutionary Algorithms, Evolutionary Programming
series	eCAADe
last changed	2022/06/07 07:54

_id	cf2003_m_040
id	cf2003_m_040
authors	BAY, Joo-Hwa
year	2003
title	Making Rebuttals Available Digitally for Minimising Biases in Mental Judgements
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 147-156
summary	The problem of heuristic biases (illusions) discussed by Tversky and Kahneman (1982) that can lead to errors in judgement by human designers, when they use precedent knowledge presented graphically (Bay 2001). A Cognitive framework of belief, goal, and decision, and a framework of representation of architectural knowledge by Tzonis are used to map out the problem of heuristic biases in the human mind. These are used to discuss what aspects of knowledge can be presented explicitly and digitally to users to make rebuttal more available for human thinking at the cognitive level. The discussion is applicable to both inductive and analytic digital knowledge systems that use precedent knowledge. This discussion is targeted directly at means of addressing bias in the human mind using digital means. The problem of human bias in machine learning and generalisation are discussed in a different paper, and the problems of international or non-intentional machine bias are not part of discussion in this paper.
keywords	analogy, bias, design thinking, environmental design, heuristics
series	CAAD Futures
last changed	2003/11/22 07:26

_id	9a04
authors	Bouza Rodríguez, J.B., Valcarce, J.D., Baltar, X.L. and Vázquez, M.P.
year	2001
title	SISTEMA WEB INTERACTIVO CON CATÁLOGO PSEUDO-TRIDIMENSIONAL DE RODUCTOS Y VÍDEO EN TIEMPO REAL (Interactive Web System with Pseudo-Three-Dimensional Catalogue of Places and Video in Real Time)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 104-106
summary	It has been designed and developed a system Web that has video in real time and an interactive product catalogue based on pseudo-three-dimensional models, that is to say, models that they pretend to be three-dimensional, but that in fact do not have geometry 3D properly in the memory, but of an appropriate composition according to the case of geometry 2D (image or any graph), that allows to see the model from several points of view and to consult additional information (weight, material, dimensions, etc.). They have been analyzed and proven the different formats from transmission of video and audio by Internet, studying all its parameters, until finding the optimal ones for this server. In comparison with the use of format VRML (Virtual Reality Modeling Language) used commonly to put models 3D in the Web, this system that we have devised presents like advantages the low time of load, the high precision of the views of the object and the low cost of maintenance of the Web. On the other hand, one does not have the infinity of views and facility of manipulation of the VRML.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	0277
authors	Brusilovsky, P.
year	2001
title	Adaptive hypermedia
source	User modelling and User-Adapted Interaction, volume 11, pp. 87-110, Kluwer
summary	Hypertext/hypermedia systems and user-model-based adaptive systems in the areas of learning and information retrieval have for a long time been considered as two mutually exclusive approaches to information access. Adaptive systems tailor information to the user and may guide the user in the information space to present the most relevant material, taking into account a model of the user's goals, interests and preferences. Hypermedia systems, on the other hand, are `user neutral': they provide the user with the tools and the freedom to explore an information space by browsing through a complex network of information nodes. Adaptive hypertext and hypermedia systems attempt to bridge the gap between these two approaches. Adaptation of hypermedia systems to each individual user is increasingly needed. With the growing size, complexity and heterogeneity of current hypermedia systems, such as the World Wide Web, it becomes virtually impossible to impose guidelines on authors concerning the overall organization of hypermedia information. The networks therefore become so complex and unstructured that the existing navigational tools are no longer powerful enough to provide orientation on where to search for the needed information. It is also not possible to identify appropriate pre-defined paths or subnets for users with certain goals and knowledge backgrounds since the user community of hypermedia systems is usually quite inhomogeneous. This is particularly true for Web-based applications which are expected to be used by a much greater variety of users than any earlier standalone application. A possible remedy for the negative effects of the traditional `one-size-fits-all' approach in the development of hypermedia systems is to equip them with the ability to adapt to the needs of their individual users. A possible way of achieving adaptivity is by modeling the users and tailoring the system's interactions to their goals, tasks and interests. In this sense, the notion of adaptive hypertext/hypermedia comes naturally to denote a hypertext or hypermedia system which reflects some features of the user and/or characteristics of his system usage in a user model, and utilizes this model in order to adapt various behavioral aspects of the system to the user. This book is the first comprehensive publication on adaptive hypertext and hypermedia. It is oriented towards researchers and practitioners in the fields of hypertext and hypermedia, information systems, andpersonalized systems. It is also an important resource for the numerous developers of Web-based applications. The design decisions, adaptation methods, and experience presented in this book are a unique source of ideas and techniques for developing more usable and more intelligent Web-based systems suitable for a great variety of users. The practitioners will find it important that many of the adaptation techniques presented in this book have proved to be efficient and are ready to be used in various applications.
series	other
email
last changed	2003/04/23 15:14

_id	ga0134
id	ga0134
authors	Buiani, Roberta
year	2001
title	Virtual Exhibitions: How to put the gallery on-line?
source	International Conference on Generative Art
summary	This research is part of a project I developed at York University and realized at the Walter Phillips Gallery at Banff Centre for the Arts. It originated from a preliminary survey on the galleries and museum’s approach to the web: how did these institutions engage with the virtualspace? What tools did they employ to display their content? How did they exploit internet in order to promote and advertise their content and transmit a certain message? Following the examination of several interfaces and modes of display, a list of recurrent strategies, needs andlacks was compiled. A further development of the research consisted in a practical attempt to include all the characteristics observed and to add the elements supposedly missing in a single project. The project examined two distinct and very different exhibitions which took place during the summerat the Walter Phillips Gallery in Banff: they were analysed, documented and rendered on-line using a popular animation software such as Flash.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	54c0
authors	Cabezas, M., Mariano, C., Oliva, G. and Oliva, S.
year	2001
title	New Technologies Applied toTraining - Evaluation of a New Teaching Methodology for the Descriptive Geometry
doi	https://doi.org/10.52842/conf.ecaade.2001.275
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 275-281
summary	The purpose of this paper is to point out the most relevant aspects of an experience which gathers research processes and teaching practices at a University level, activities in which the authors hereof have been involved for many years. Even though this question has already been widely discussed – being its analysis extremely broad and varied – it is still quite interesting. This issue deals with the incorporation of new technologies in the teaching and learning processes and in the case of this specific experience, it refers to its trial implementation in the classroom.
keywords	Evaluation, Teaching, Geometry, Informatics
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: