Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 716

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_18
id	avocaad_2001_18
authors	Aleksander Asanowicz
year	2001
title	The End of Methodology - Towards New Integration
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The present paper is devoted to the deliberation on the genesis and development of designing from the point of view of the potential use of computers in the process. Moreover, it also presents the great hopes which were connected with the use of the systematic designing methods in the 1960’s, as well as the great disappointment resulting from the lack of concrete results. At this time a great deal of attention was paid to the process of design as a branch of a wider process of problem-solving. Many people believed that the intuitive methods of design traditionally used by architects were incapable of dealing with the complexity of the problems to be solved. Therefore, the basic problem was the definition of a vertical structure of the designing process, which would make it possible to optimise each process of architectural design. The studies of design methodology directed at the codification of the norms of actions have not brought about any solutions which could be commonly accepted, as the efforts to present the designing process as a formally logical one and one that is not internally “uncontrary” from the mathematical point of view, were doomed to fail. Moreover, the difficulties connected with the use of the computer in designing were caused by the lack of a graphic interface, which is so very characteristic of an architect’s workshop. In result, the methodology ceased to be the main area of the architect’s interest and efforts were focused on facilitating the method of the designer’s communication with the computer. New tools were created, which enabled both the automatic generation of diversity and the creation of forms on the basis of genetic algorithms, as well as the presentation of the obtained results in the form of rendering, animation and VRML. This was the end of the general methodology of designing and the beginning of a number of methods solving the partial problems of computer-supported design. The present situation can be described with the words of Ian Stewart as a “chaotic run in all directions”. An immediate need for new integration is felt. Cyber-real space could be a solution to the problem. C-R-S is not a virtual reality understood as an unreal world. Whilst VR could be indeed treated as a sort of an illusion, C-R-S is a much more realistic being, defining the area in which the creative activities are taking place. The architect gains the possibility of having a direct contact with the form he or she is creating. Direct design enables one to creatively use the computer technology in the designing process. The intelligent system of recognising speech, integrated with the system of virtual reality, will allow to create an environment for the designer – computer communication which will be most natural to the person. The elimination of this obstacle will facilitate the integration of the new methods into one designing environment. The theoretical assumptions of such an environment are described in the present paper.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	f95f
authors	Angulo, A.H., Davidson, R.J. and Vásquez de Velasco, G.P.
year	2001
title	Digital Visualization in the Teaching of Cognitive Visualization
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 292-301
doi	https://doi.org/10.52842/conf.acadia.2001.292
summary	Professional design offices claim that our graduates have difficulties with their free-hand perspective drawing skills. This fact, which has become obvious over the last 5 years, is parallel to a clear tendency towards the use of 3-dimensional digital imagery in the projects of our students. Frequently, faculty tends to blame the computer for the shortcomings of our students in the use of traditional media, yet there is no clear evidence on the source of the blame. At a more fundamental level, the visualization skills of our students are questioned. This paper will explain how faculty teaching design communication techniques, with traditional and digital media, are working together in the development of a teaching methodology that makes use of computers in support of our student’s training on cognitive visualization skills, namely; “The Third-Eye Method”. The paper describes the Third-Eye Method as an alternative to traditional methods. As evidence of the benefits offered by the Third-Eye Method, the paper presents the results of testing it against traditional methods among freshman students. At the end, the paper draws as conclusion that computers are not the main source of the problem but a potential solution.
keywords	Pedagogy, Visualization, Media
series	ACADIA
email
last changed	2022/06/07 07:54

_id	3e6a
authors	Wittkopf, Stephen
year	2001
title	I-Light, a webbased learning system for architectural lighting design
source	TU Darmstadt
summary	With the rising meaning of architectural lighting also the requirement at appropriate light planning rises. The possibilities of digital instruments were realized by several lamp manufacturers, which use 3D-CAD to present visualizations and use the Internet for their distribution. However in the field of universities it is important to offer instruments and methods with which the interaction of light and architecture can be learned descriptive, comprehensibly and interactively. Introductory in a theoretical section the bases of light planning and learn-educational concepts are pointed out. Parallel the state of the art in the areas of computer-aided learning and the light simulation is presented and evaluated regarding the learn-educational suitability. Thereupon an action requirement is formulated, which designates a new integration of the individual areas. It flows into the development of an interactive Web-based training system for the design with light - I-Light - whose concept and implementation in the following sections is described. In an application of examples the author points out finally, how this innovative connection of the Internet, 3D-CAD and simulation supports a better understanding of the medium light in the architecture perception. A new virtual light laboratory forms the core of this training system, in which architectural planning examples can be represented three-dimensional and changed interactively. A developed semantic scene model ensures for the fact that lighting, materials and delimitation surfaces are varied didactically appropriately and compared, so that visual effects and important interrelation can be assumed and checked. The author orients itself at the methodology by simulation and merges 3D-CAD and light simulation programs into the training system. The calculated photo-realistic picture is regarded not - as otherwise usual - as presentation material, but as interactive tools. Since 3D-CAD and light simulation programs presuppose much application knowledge, the author does not pursue to confront the user with these complex programs. He developed a new system with a Web-based graphic surface, that enables 3D-scenes to be loaded, be changed and stored easily (front-end). Furthermore it enables the remote control to an automatic, photo-realistic simulation on push of a button on an external high end render machine, that is connected via Internet, where at least all files are externally stored. For the operation of the front-end is only an average PC with a standard Webbrowser necessary. For the receiving station the author develops a new interface, which extends a standard Web server by the new possibility of storing and executing lighting simulations (back-end). The system presented by the author differs in the didactical concept and in the technical implementation from the solutions existing so far in similar areas. The interactive virtual light laboratories of the architectural planning examples represent a new beginning of Web-based learning environments. To the selected tools (HTML, Java, VRML, Web server, Lightscape) there yet exist no matured alternatives.
series	thesis:PhD
email
more	http://elib.tu-darmstadt.de/diss/000131/
last changed	2003/02/12 22:37

_id	e9b1
authors	Heylighen, Ann and Neuckermans, Herman
year	2001
title	Destination: Practice – Towards a maintenance contract for the architect’s degree
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 090-099
doi	https://doi.org/10.52842/conf.acadia.2001.090
summary	Addressing the subject of Case-Based Reasoning (CBR) in architectural design, we present a Web-based design assistant for student- and professional architects called DYNAMO. Its main objective is to initiate and nurture the life-long process of learning from (design) experience as suggested by CBR’s cognitive model. Rather than adopting this model as such, DYNAMO extrapolates it beyond the individual by stimulating and intensifying several modes of interaction. One mode – the focus of this paper – concerns the interaction between the realm of design education and the world of practice. DYNAMO offers a platform for exchanging design efforts and insights, in the form of cases, between both parties, which perfectly chimes with the current tendency towards life-long learning and continuing education. Just like our university advises graduates to ‘Take a maintenance contract with your degree’, architecture schools may encourage recently qualified architects to subscribe to DYNAMO. To what extent the tool can fulfill this role of maintenance contract is discussed at the end of the paper, which reports on how DYNAMO was used and appreciated by professional architects at different levels of expertise.
keywords	Case-Based Reasoning, Web-Based Learning, Digital Repositories
series	ACADIA
email
last changed	2022/06/07 07:50

_id	0bc7
authors	Norman, F.
year	2001
title	Towards a paperless studio
source	Proceedings of The ARCC Spring Research Meeting Architectural Research Centers Consortium, The College of Architecture and Urban Studies at Virginia Tech, Blacksburg, Virginia, pp. 85-91
summary	The infusion of digital media into the practice of architecture is changing how we design as well as what we design. Digital media has altered the process of design and the culture of design education. The question before us is how does one transition from a completely analog system of representation to one of complete computer immersion or the "paperless studio". Schools of Architecture have already begun to struggle with the physical issues of integration of new media (infrastructure and economics). But the pedagogical integration of new media should be of a greater concern. New media and its forms of representation are challenging traditional skills of communication and representation, (i.e., sketching, hand drawing and physical model making). The paradox facing architectural practice today is the integration of new media into a realm where traditional or manual forms of representation are ingrained into how we think, produce and communicate. We must ask ourselves, must new media be held to the traditional forms of representation?
series	other
last changed	2003/04/23 15:50

_id	679c
authors	Norman, Frederick
year	2001
title	Towards a Paperless Studio
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 336-343
doi	https://doi.org/10.52842/conf.acadia.2001.336
summary	The infusion of digital media into the practice of architecture is changing how we design as well as what we design. Digital media has altered the process of design and the culture of design education. The question before us is how does one transition from a completely analog system of representation to one of complete computer immersion or the “paperless studio”. Schools of Architecture have already begun to struggle with the physical issues of integration of new media (infrastructure and economics). But the pedagogical integration of new media should be of a greater concern. New media and its forms of representation are challenging traditional skills of communication and representation, (i.e., sketching, hand drawing and physical model making). The paradox facing architectural practice today is the integration of new media into a realm where traditional or manual forms of representation are ingrained into how we think, produce and communicate. We must ask ourselves, must new media be held to the traditional forms of representation?
keywords	Digital Media, Design Studio, 3D Modeling, Animation
series	ACADIA
email
last changed	2022/06/07 07:58

_id	76ea
authors	Petzold, F., Thurow, T. and Donath, D.
year	2001
title	Planing relevant survey of buildings - starting point in the revitalization process of existing buildings - requirements, concepts, prototypes and visions
source	Abstract Book CIPA 2001 International Symposium, Potsdam 2001, pp. 58
summary	Future tasks for the building trade in Germany will be more and more a combination of the fields of revitalization and new building projects. Prerequisite for computer-aided planing for existing buildings is both, the use of onsite computer-aided measurement and the integration of all specialists involved in the building process. Existing approaches for this problem are not yet satisfying. The aim of this research project is twofold: to design a practice-relevant software concept and to develop various prototypic systems, for a structured way of capturing and organizing building-related information about existing buildings in digital form. The research is oriented towards existing buildings, in particular residential and commercial buildings. This project is a special branch of SFB524. The project is founded by "Deutsche Forschungsgesellschaft (DFG)".
series	other
email
last changed	2003/02/26 18:58

_id	sigradi2018_1517
id	sigradi2018_1517
authors	Rodrigues de Holanda, Maria Augusta; Porto Carreiro, Patrícia
year	2018
title	Geodesign: A metametodology in the teaching of the project process in the School of Architecture and Urbanism of the UFPE
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 92-99
summary	In 2001, discussions began on the elaboration of a new Pedagogical Project (PPC) for the School of Architecture and Urbanism (CAU) of the Federal University of Pernambuco (UFPE), but only in 2010 a proposal was presented utilizing new didactic-pedagogical concepts and dynamics. After eight years of its implementation, and without a formal evaluation, it was verified the lack of a methodology that manages the teaching process according to the principles formulated in the PPC2010. This article consists of the analysis of the teaching of the CAU /UFPE design process. It also contains a proposal`s presentation to update the curricular structure through the meta-methodology of Geodesign. The proposal strives for a better flow of information, integration and contextualization of contents.
keywords	Geodesign; Architectural project; Project teaching
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ddss2004_d-77
id	ddss2004_d-77
authors	Tangari, L., M. Ottomanelli, and D. Sassanelli
year	2004
title	The Project Planning of Urban Decongestion
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 77-92
summary	This study introduces a methodology for the evaluation, among a set of possible plans and/or policies, of a transport system which could reduce the effects of the network congestion on an urban area. Hence it is proposed a procedure which contains a new element compared with the current methodologies that is the final user’s evaluation of the examined system by turning to the application of the contingent valuation method, a technique like stated preferences. The approach we propose is based on the necessity for a determination of an optimal solution to the urban congestion to be established on the politic acceptability by the final user. Solutions which result virtually feasible for a public administration both on a technique and economic point of view often meet hostility by individuals. Consequently, it would be interesting for policy makers to adopt a process of valuation which could let to understand the user’s sensitivity and hostility towards specific configurations of the system, chosen as solution to decongestion (traffic calming, roadpricing, auto-free zones) and consequently to make less unpleasant the strategy to be carried out to control congestion (Harrington et al., 2001). In this way, a user does not judge the implementation of a set of projects made by a decision-maker as imposition and he is willing to pay in order to fulfil the chosen scenario. Finally we describe an application of the proposed methodology relating the definition of the integrated transport system in the metropolitan area of Bari, chief town of Apulia.
keywords	Contingent Valuation, Transportation Planning, Urban Decongestion
series	DDSS
last changed	2004/07/03 22:13

_id	cb8e
authors	Vegte, W.F. van der, Pulles, J.P.W. and Vergeest, J.S.M.
year	2001
title	Towards computer-supported inclusion and integration of life cycle processes in product conceptualization based on the process tree
source	Automation in Construction 10 (6) (2001) pp. 731-740
summary	Development of computer support in design is showing several shifts in focus over the latest decades. This paper relates to the shifts from detail design to conceptualization, from artifact geometry definition only to the inclusion of process knowledge, and from isolated aspects to integrated aspects. It discusses a possible solution for simultaneous consideration of life cycle process aspects during conceptual design using the process tree representation. Integrating process aspects can be considered a preparation for an integrated representation of artifact and process aspects to be used in a front–end environment for conventional CAD detailing systems
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	8c2d
authors	Alvarado, Rodrigo García
year	2001
title	PROJECTED SPACE: CHARACTERIZING THE “CYBRID ARCHITECTURE”.
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 285-287
summary	The “cybrid architecture” has been defined like integration of physical and digital spaces. Based on the capability of electronic media to generate virtual environments (cyberspaces) which could be related to buildings. However, theoretical studies and contemporary works reveal a more complex relationship between media and constructions. Expressed in architectural characteristics that constitutes a new spatial quality, named here projected space. Hence the paper argues that “cybrid architecture” is not technological, but is a modification of conventional architectural space due to cultural evolution.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	0bef
authors	Ataman, Osman and Wingert, Kate
year	2001
title	DEVELOPING AN INTERACTIVE URBAN MODEL PROTOTYPE
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 300-303
summary	The application of new digital media provides a methodology for reconstructing and analyzing certain architectural elements from the past. In this paper, a research project is described to develop a prototype system to represent and manipulate information in urban settings. In general, our research is aimed at developing a prototype urban database model and Philadelphia is chosen as a case study. An emphasis is placed on identification, categorization and representation of information in a way that is useful for urban researchers for analysis.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2a2d
authors	Baesler, F.A., Sepúlveda, J., Thompson, W., García, R.A., Pezo, M.B. and Rodríguez, P.M.
year	2001
title	EL USO DE SIMULACIÓN EN EL ANÁLISIS DEL FLUJO DE PACIENTES EN SISTEMAS DE SALUD (The Use of Simulation in the Analysis of the Flow of Patients in Health Systems)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 86-88
summary	This paper presents the results of three research projects developed by the authors oriented to the use of simulation as a tool for process improvement at the emergency room and cancer treatment center of the Orlando Regional Health Care Systems Hospital in the USA. The results obtained showed that simulation is as powerful tool for reducing patients waiting time. A second phase of this study presents the idea of integrating simulation and virtual reality techniques. This methodology would allow to explore digitally new alternatives for architectonic design linked to the development of activities over time.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	avocaad_2001_10
id	avocaad_2001_10
authors	Bige Tunçer, Rudi Stouffs, Sevil Sariyildiz
year	2001
title	Facilitating the complexity of architectural analyses
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	It is common practice for architecture students to collect documents on prominent buildings relevant to their design task in the early stage of design. While practitioners can rely on a body of design experience of their own, during the process of a new design, students can only draw from the examples of success and failure from other architects. In the past, such precedent based learning was implicit in the master-apprentice relationship common in the educational system. Nowadays academics commonly no longer have the possibility to maintain an extensive design practice, and instead introduce important outside precedents to the students. Thus, the study of important historical precedents or designs plays an important role in design instruction and in the students’ design processes. While there is no doubt that the most effective outcome of such a study would be achieved when the student does entire the study herself, students also benefit from a collaboration with peers, where they form groups to do an analysis of various aspects of a same building or over a group of buildings. By integrating the respective results into a common, extensible, library, students can draw upon other results for comparisons and relationships between different aspects or buildings. The complexity this introduces is best supported in a computer medium.The Web offers many examples of architectural analyses on a wide variety of subjects. Commonly, these analyses consist of a collection of documents, categorized and hyperlinked to support navigation through the information space. More sophisticated examples rely on a database for storage and management of the data, and offer a more complex categorization of the information entities and their relationships. These studies present effective ways of accessing and browsing information, however, it is precluded within these analyses to distinguish and relate different components within the project documents. If enabled, instead, this would offer a richer information structure presenting new ways of accessing, viewing, and interpreting this information. Hereto, documents can be decomposed by content. This implies both expanding the document structure, replacing document entities by detailed substructures, and augmenting the structure’s relatedness with content information. The relationships between the resulting components make the documents inherently related by content.We propose a methodology to integrate project documents into a single model, and present an application for the presentation of architectural analyses in an educational setting. This approach provides the students with a simple interface and mechanisms for the presentation of an analysis of design precedents, and possibly their own designs. Since all the information is integrated within a single environment, students will benefit from each others’ studies, and can draw new conclusions across analyses and presentations from their peers.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	54c0
authors	Cabezas, M., Mariano, C., Oliva, G. and Oliva, S.
year	2001
title	New Technologies Applied toTraining - Evaluation of a New Teaching Methodology for the Descriptive Geometry
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 275-281
doi	https://doi.org/10.52842/conf.ecaade.2001.275
summary	The purpose of this paper is to point out the most relevant aspects of an experience which gathers research processes and teaching practices at a University level, activities in which the authors hereof have been involved for many years. Even though this question has already been widely discussed – being its analysis extremely broad and varied – it is still quite interesting. This issue deals with the incorporation of new technologies in the teaching and learning processes and in the case of this specific experience, it refers to its trial implementation in the classroom.
keywords	Evaluation, Teaching, Geometry, Informatics
series	eCAADe
email
last changed	2022/06/07 07:54

_id	3934
authors	Cabezas, M., Mariano, C., Oliva, G. and Oliva, S.
year	2001
title	EVALUACIÓN DE UNA METODOLOGÍA DE ENSEÑANZA DE LA GEOMETRÍA DESCRIPTIVA (Evaluation of a Methodology for the Teaching of Descriptive Geometry)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 204-206
summary	The purpose of this paper is to point out the most relevant aspects of an experience which gathers research processes and teaching practices at a University level, activities in which the authors hereof have been involved for many years. Even though this question has already been widely discussed – being its analysis extremely broad and varied – it is still quite interesting. This issue deals with the incorporation of new technologies in the teaching and learning processes and in the case of this specific experience, it refers to its trial implementation in the classroom.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ga0107
id	ga0107
authors	Ceccato, Cristiano
year	2001
title	Integration: Master [Planner \| Programmer \| Builder]
source	International Conference on Generative Art
summary	The development of modern computer-based design systems and advanced manufacturing methods have progressed to the point where the promise of mass-customisation and the establishment of the ‘designer as integrator’ are being realised: the former implies that designers can now act as creators of systems which produce infinite possibilities, and the latterthat the convergence of designer and manufacturer, through common technologies, is enabling a reunification between design and construction processes. This paper discusses the symbiotic relationships of these paradigms within design research, practice and their commercialimplications, and the significance of the integration of new design tools and production methods for architects and designers.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	8a8c
authors	Choi, J.W., Kwon, D.-Y. and Lee, H.-S.
year	2001
title	DesignBUF: Exploring and Extending 2D Boolean Set Operations with Multiple Modes in the Early Design Phase
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 589-602
summary	Boolean set operations have been a powerful design function set for any CAD systems including 2D and 3D domains. Their capacity to provide even more powerful design tools have not, however, been fully explored in the 2D system. The purpose of this study is to further explore 2D Boolean set operations with multiple modes, which include a pick mode, a wait mode, a drag-and-drop mode, and a draw-and-action mode. We develop a prototype design tool, called DesignBUF. It introduces a new concept of “design object buffer,” an intermediate design zone in which a designer freely sketches his/her design with design objects in a brainstorming fashion since valuable design ideas are ephemeral? and the designer needs to generate design schemes rapidly before the ideas disappear or are forgotten. After finishing such fast brainstorming processes, especially in the early design phase, the designer gets a stable and refined form of a floor plan, which in turn becomes a well structured form to maintain building and design information systematically. Therefore, the designer keeps switching back and forth between the “design object buffer” and structured floor plans. We believe that this dual working memory will not only increase system flexibility, but also reduce computation with unnecessarily complex design objects. This study also develops a robust algorithm to transform the intermediate design objects into a well-structured floor plan. In fact, the algorithm is also used for the extended Boolean set operations described above. A structured floor plan can also be transformed into non-structured forms. Research issues for future development are also identified at the end of the paper.
keywords	Design Buffer, Extended Boolean Set Operations, Structured Floor Plan.
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	4533
authors	Datta, S., Morison, D. and Roberts, K.
year	2001
title	Pedagogical Templates: A Comparative Study of Higher Order Reflective Making, Playful Design Learning Forum
source	Adelaide University School of Architecture, Landscape Architecture and Urban Design, Adelaide
summary	Schon's notion of reflection-in-action implies a constructivist process of learning, especially valid in the teaching of professional disciplines such as architecture. Action becomes the instrument of conjecture and learning arises in the context of reflection upon the act. Such a process of interleaving action and reflection constitutes a "higher-order" process of reflective making. Research in design studies has shown that strategies for making differ markedly between professional and novitiate designers. Further, such studies have shown that skilled designers employ past experience and precedents to create context for new problem situations. To address the lack of context in novitiate learning situations, we propose the use of "pedagogical templates" for the promotion of "higher-order" strategies in design learning contexts for supporting beginning design students. We focus on the use of digital media, specifically for the design, implementation and delivery of constructive learning situations. This paper presents the use of a pedagogical template in the creation of constructivist contexts for two complementary courses, a traditional design studio and a computermodelling course at Deakin University. The resulting implications for design learning and the integration of physical and digital forms of making through the use of a pedagogical template are discussed.
series	other
last changed	2003/04/23 15:50

For more results click below: