Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 716

Reformat results as: short short into frame detailed detailed into frame

_id	12e3
authors	Ahmad Rafi, M.E., Che Zulkhairi, A. and Karboulonis, P.
year	2002
title	Interactive Storytelling and Its Role in the Design Process
doi	https://doi.org/10.52842/conf.caadria.2002.151
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 151-158
summary	Projects of ever increasing complexity and size have incited the need for new and robust design methodologies and tools in an effort to manage complexity, lower costs, ascertain quality and reduce risk. Technology convergence through the growing availability of networked computers, rapid progress in Computer Aided Design (CAD) and information management have encouraged the undertaking of even more complex designs that demand high degrees of interaction, collaboration and the efficient sharing and dissemination of information. It is suggested that interactive storytelling and interactive design (Rafi and Karboulonis, 2001) techniques that use non-linear information mapping systems can be deployed to assist users as they navigate information that is structured to address localized needs as they arise. The design process is a collaborative effort that encompasses diverse knowledge disciplines and demands the management and utilization of available resources to satisfy the needs of a single or set of goals. It is thought that building industry specialists should work close together in an organised manner to solve design problems as they emerge and find alternatives when designs fall short. The design process involves the processing of dynamic and complex information, that can be anything from the amount of soil required to level lands - to the needs of specific lightings systems in operation theatres. Other important factors that affect the design process are related to costs and deadlines. This paper will demonstrate some of our early findings in several experiments to establish nonlinear storytelling. It will conclude with a recommendation for a plausible design of such a system based on experimental work that is currently being conducted and is reaching its final stages. The paper will lay the foundations of a possible path to implementation based on the concept of multi-path animation that is appropriate for structuring the design process as used in the building industry.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	c39a
authors	Ahumada Gallardo, N., López Morales, B., Mora Olate, M.L. and Muñoz, V.C.
year	2001
title	MARCO ANTONIO DE LA PARRA COMO NARRADOR Y ENSAYISTA. MONOGRAFIA MULTIMEDIAL (Marco Antonio de la Parra as Narrator and Writer. Monography in Multimedia)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 268-270
summary	The analysis of Marco Antonio de la Parra’s novels and essays from the discourse perspective, is the contents of an interdisciplinary work for modernizing and improving communicative possibilities of universitary thesis through multimedia. For the multimedia design, the main and most recent digital creating software for the graphic treatment of texts and images were analised, then the navigation system and screens were designed, difining backgrounds, texts, audio and video, besides buttons and hits. Results permit: 1. To present the contents in an easy access and transportation support, reducing production costs. 2. The offering of three communication supports: written text, audio and video. 3. Ostensibly improves universitary thesis and seminars quality.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	avocaad_2001_13
id	avocaad_2001_13
authors	Alexander Koutamanis
year	2001
title	Modeling irregular and complex forms
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Computational technologies provide arguably the first real opportunity architectural design has had for a comprehensive description of built form. With the advent of affordable computer-aided design systems (including drafting, modeling, visualization and simulation tools), architects believe they can be in full control of geometric aspects and, through these, of a wide spectrum of other aspects that are implicit or explicit in the geometric representation. This belief is based primarily on the efficiency and effectiveness of computer systems, ranging from the richness and adaptability of geometric primitives to the utility of geometric representations in simulations of climatic aspects. Such capabilities support attempts to design and construct more irregular or otherwise complex forms. These fall under two main categories: (1) parsing of irregularity into elementary components, and (2) correlation of the form of a building with complex geometric structures.The first category takes advantage of the compactness and flexibility of computational representations in order to analyse the form of a design into basic elements, usually elementary geometric primitives. These are either arranged into simple, unconstrained configurations or related to each other by relationships that define e.g. parametric relative positioning or Boolean combinations. In both cases the result is a reduction of local complexity and an increase of implicit or explicit relationships, including the possibility of hierarchical structures.The second category attempts to correlate built form with constraints that derive usually from construction but can also be morphological. The correlation determines the applicability of complex geometric structures (minimally ruled surfaces) to the description of a design. The product of this application is generally variable in quality, depending upon the designer's grounding in geometry and his ability to integrate constraints from different aspects in the definition of the design's geometry.Both categories represent a potential leap forward but are also equally hampered by the rigidity of the implementation mechanisms upon which they rely heavily. The paper proposes an approach to making these mechanisms subordinate to the cognitive and technical aspects of architectural thinking through fuzzy modeling. This way of modeling involves a combination of (a) canonical forms, (b) tolerances around canonical forms and positions, (c) minimal and maximal values, (d) fuzzy boundaries, and (e) plastic interaction between elements based on the dual principles of local intelligence and autonomy. Fuzzy models come therefore closer to the intuitive manners of sketching, while facilitating transition to precise and complex forms. The paper presents two applications of fuzzy modeling. The first concerns the generation of schematic building layouts, including adaptive control of programmatic requirements. The second is a system for designing stairs that can adapt themselves to changes in their immediate environment through a fuzzy definition of geometric and topological parametrization.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_05
id	avocaad_2001_05
authors	Alexander Koutamanis
year	2001
title	Analysis and the descriptive approach
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The rise of consciousness concerning the quality of working and living conditions has been a permanent though frequently underplayed theme in architecture and building since the reconstruction period. It has led to an explosive growth of programmatic requirements on building behaviour and performance, thus also stimulating the development of design analysis. The first stage of development was characterized by the evolution of prescriptive systems. These reversed the structure of pre-existing proscriptive systems into sequences of known steps that should be taken in order to achieve adequate results. Prescriptive systems complemented rather than replaced proscriptive ones, thereby creating an uncertain mixture of orthodoxy and orthopraxy that failed to provide design guidance for improving design performance and quality.The second stage in the development of design analysis focuses on descriptive methods and techniques for analyzing and supporting evaluation. Technologies such as simulation and scientific visualization are employed so as to produce detailed, accurate and reliable projections of building behaviour and performance. These projections can be correlated into a comprehensive and coherent description of a building using representations of form as information carriers. In these representations feedback and interaction assume a visual character that fits both design attitudes and lay perception of the built environment, but on the basis of a quantitative background that justifies, verifies and refines design actions. Descriptive analysis is currently the most promising direction for confronting and resolving design complexity. It provides the designer with useful insights into the causes and effects of various design problems but frequently comes short of providing clear design guidance for two main reasons: (1) it adds substantial amounts of information to the already unmanageable loads the designer must handle, and (2) it may provide incoherent cues for the further development of a design. Consequently the descriptive approach to analysis is always in danger of been supplanted by abstract decision making.One way of providing the desired design guidance is to complement the connection of descriptive analyses to representations of form (and from there to synthesis) with two interface components. The first is a memory component, implemented as case-bases of precedent designs. These designs encapsulate integrated design information that can be matched to the design in hand in terms of form, function and performance. Comparison between precedents with a known performance and a new design facilitate identification of design aspects that need be improved, as well as of wider formal and functional consequences. The second component is an adaptive generative system capable of guiding exploration of these aspects, both in the precedents and the new design. The aim of this system is to provide feedback from analysis to synthesis. By exploring the scope of the analysis and the applicability of the conclusions to more designs, the designer generates a coherent and consistent collection of partial solutions that explore a relevant solution space. Development of the first component, the design case-bases, is no trivial task. Transformability in the representation of cases and flexible classification in a database are critical to the identification and treatment of a design aspect. Nevertheless, the state of the art in case-based reasoning and the extensive corpus of analysed designs provide the essential building blocks. The second component, the adaptive generative system, poses more questions. Existing generative techniques do not possess the necessary richness or multidimensionality. Moreover, it is imperative that the designer plays a more active role in the control of the process than merely tweaking local variables. At the same time, the system should prevent that redesigning degenerates into a blind trial-and-error enumeration of possibilities. Guided empirical design research arguably provides the means for the evolutionary development of the second component.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2006_000
id	2006_000
authors	Bourdakis, Vassilis and Charitos, Dimitris (eds.)
year	2006
title	Communicating Space(s)
doi	https://doi.org/10.52842/conf.ecaade.2006
source	24th eCAADe Conference Proceedings [ISBN 0-9541183-5-9], Volos (Greece) 6-9 September 2006, 914 p.
summary	The theme of this conference builds on and investigates the pre-existing and endlessly unfolding relationship between two domains of scientific inquiry: Architecture, urban design and planning, environmental design, geography and Social theory, media and communication studies, political science, cultural studies and social anthropology. Architectural design involves communication and could thus be partly considered a communicational activity. Designers (or not) see architectural designs, implicitly, as carriers of information and symbolic content; similarly buildings and urban environments have been “read” and interpreted by many (usu- ally not architects) as cultural texts. At the same time, social and cultural studies have studied buildings and cities, as contexts for social and cultural activities and life in general, from their mundane expression of “everyday life” (Highmore, 2001) to elite expressions of artistic creativity and performance. Information and communication technologies (ICTs) support both of these levels of scientific inquiry in many ways. Most importantly however, ICTs need design studies, architectural and visual design, social and cultural studies in their quest to create aesthetically pleasing, ergonomically efficient and functional ICT sys- tems; this need for interdisciplinarity is best articulated by the low quality of most on-line content and applica- tions published on the web.
series	eCAADe
type	normal paper
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	602f
authors	Büscher, Monika
year	2001
title	Landscapes of Practice: Bricolage as a Method for Situated Design
source	Computer Supported Cooperative Work (CSCW) 10(1): 1-28; Jan 2001
summary	This paper proposes a ‘bricolage’ approach to designing systems for cooperative work.This involves users, participatory designers and ethnographers in a continuing cycle of design andrevised work practice, often in settings where resources are limited and short-termresults are required.If exploits the flood to market of hardware, software and services. The approach is illustrated withresults from a project with a practice of landscape architects. Their work is analysed in terms ofcommunities of practice and actor networks. These perspectives help to identify the ‘socilities’ ofpeople and technologies and of the relationships between them. They help to distinguish differentforms of cooperation with differing support needs, opportunities and vulnerabilities. They inform thedesign of technical support, the assessment of outcomes, and the design of further solutions, in acycle of ‘situated experimentation’.
keywords	Actor-Networks; Bricolage; Communities of Practice; CSCW; Ethnography; Participatory Design
series	other
email
last changed	2002/07/07 16:01

_id	b0be
authors	Chien, Sheng-Fen
year	2001
title	Ensuring Usability of CAAD Systems. A Hybrid Approach
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 361-374
summary	Many CAAD software prototypes today are developed with the aim to bring research results closer to practice. This paper describes a hybrid approach that integrates an Object-Oriented Software Engineering (OOSE) methodology with a usability analysis methodology—GOMS. This approach is examined through two case studies and has shown promising results. It enables CAAD system developers to be aware of usability issues and conduct usability evaluation as early as the analysis phase of the software development process. Consequently, this may improve the quality of CAAD software systems as well as ensure the usability of the systems.
keywords	Usability Evaluation, GOMS Analysis, Usability Engineering, Object-Oriented Software Engineering
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	ec4d
authors	Croser, J.
year	2001
title	GDL Object
source	The Architect’s Journal, 14 June 2001, pp. 49-50
summary	It is all too common for technology companies to seek a new route to solving the same problem but for the most part the solutions address the effect and not the cause. The good old-fashioned pencil is the perfect example where inventors have sought to design-out the effect of the inherent brittleness of lead. Traditionally different methods of sharpening were suggested and more recently the propelling pencil has reigned king, the lead being supported by the dispensing sleeve thus reducing the likelihood of breakage. Developers convinced by the Single Building Model approach to design development have each embarked on a difficult journey to create an easy to use feature packed application. Unfortunately it seems that the two are not mutually compatible if we are to believe what we see emanating from Technology giants Autodesk in the guise of Architectural Desktop 3. The effect of their development is a feature rich environment but the cost and in this case the cause is a tool which is far from easy to use. However, this is only a small part of a much bigger problem, Interoperability. You see when one designer develops a model with one tool the information is typically locked in that environment. Of course the geometry can be distributed and shared amongst the team for use with their tools but the properties, or as often misquoted, the intelligence is lost along the way. The effect is the technological version of rubble; the cause is the low quality of data-translation available to us. Fortunately there is one company, which is making rapid advancements on the whole issue of collaboration, and data sharing. An old timer (Graphisoft - famous for ArchiCAD) has just donned a smart new suit, set up a new company called GDL Technology and stepped into the ring to do battle, with a difference. The difference is that GDL Technology does not rely on conquering the competition, quite the opposite in fact their success relies upon the continued success of all the major CAD platforms including AutoCAD, MicroStation and ArchiCAD (of course). GDL Technology have created a standard data format for manufacturers called GDL Objects. Product manufacturers such as Velux are now able to develop product libraries using GDL Objects, which can then be placed in a CAD model, or drawing using almost any CAD tool. The product libraries can be stored on the web or on CD giving easy download access to any building industry professional. These objects are created using scripts which makes them tiny for downloading from the web. Each object contains 3 important types of information: · Parametric scale dependant 2d plan symbols · Full 3d geometric data · Manufacturers information such as material, colour and price Whilst manufacturers are racing to GDL Technologies door to sign up, developers and clients are quick to see the benefit too. Porsche are using GDL Objects to manage their brand identity as they build over 300 new showrooms worldwide. Having defined the building style and interior Porsche, in conjunction with the product suppliers, have produced a CD-ROM with all of the selected building components such as cladding, doors, furniture, and finishes. Designing and detailing the various schemes will therefore be as straightforward as using Lego. To ease the process of accessing, sizing and placing the product libraries GDL Technology have developed a product called GDL Object Explorer, a free-standing application which can be placed on the CD with the product libraries. Furthermore, whilst the Object Explorer gives access to the GDL Objects it also enables the user to save the object in one of many file formats including DWG, DGN, DXF, 3DS and even the IAI's IFC. However, if you are an AutoCAD user there is another tool, which has been designed especially for you, it is called the Object Adapter and it works inside of AutoCAD 14 and 2000. The Object Adapter will dynamically convert all GDL Objects to AutoCAD Blocks during placement, which means that they can be controlled with standard AutoCAD commands. Furthermore, each object can be linked to an online document from the manufacturer web site, which is ideal for more extensive product information. Other tools, which have been developed to make the most of the objects, are the Web Plug-in and SalesCAD. The Plug-in enables objects to be dynamically modified and displayed on web pages and Sales CAD is an easy to learn and use design tool for sales teams to explore, develop and cost designs on a Notebook PC whilst sitting in the architects office. All sales quotations are directly extracted from the model and presented in HTML format as a mixture of product images, product descriptions and tables identifying quantities and costs. With full lifecycle information stored in each GDL Object it is no surprise that GDL Technology see their objects as the future for building design. Indeed they are not alone, the IAI have already said that they are going to explore the possibility of associating GDL Objects with their own data sharing format the IFC. So down to the dirty stuff, money and how much it costs? Well, at the risk of sounding like a market trader in Petticoat Lane, "To you guv? Nuffin". That's right as a user of this technology it will cost you nothing! Not a penny, it is gratis, free. The product manufacturer pays for the license to host their libraries on the web or on CD and even then their costs are small costing from as little as 50p for each CD filled with objects. GDL Technology has come up trumps with their GDL Objects. They have developed a new way to solve old problems. If CAD were a pencil then GDL Objects would be ballistic lead, which would never break or loose its point. A much better alternative to the strategy used by many of their competitors who seek to avoid breaking the pencil by persuading the artist not to press down so hard. If you are still reading and you have not already dropped the magazine and run off to find out if your favorite product supplier has already signed up then I suggest you check out the following web sites www.gdlcentral.com and www.gdltechnology.com. If you do not see them there, pick up the phone and ask them why.
series	journal paper
email
last changed	2003/04/23 15:14

_id	158e
authors	De Vries, B., Van Leeuwen, J. and Achten, H. (Eds.)
year	2001
title	Computer Aided Architectural Design Futures 2001
source	Proceedings of the Ninth International Conference [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, 814 p.
summary	CAAD Futures is a bi-annual conference that aims to promote the advancement of computer-aided architectural design in the service of those concerned with the quality of the built environment. The conferences are organized under the auspices of the CAAD Futures Foundation, which has its secretariat at the Eindhoven University of Technology in the Netherlands. This volume provides state-of-the-art articles in the following areas: capturing design, information modelling, CBR techniques, Virtual Reality, CAAD education, (hyper) media, design evaluation, design systems development, collaboration, generation, design representation, knowledge management, form programming, simulation, architectural analysis, and urban design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/2001
last changed	2003/04/02 10:52

_id	d90f
authors	Hanser, D., Halin, G. and Bignon, J.-C.
year	2001
title	Relation-Based Groupware For Heterogeneous Design Teams
doi	https://doi.org/10.52842/conf.ecaade.2001.086
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 86-91
summary	This paper describes a work about coordination of concurrent engineering in the building construction and design. More particularly it describes the coordination of project teams which are heterogeneous and short-lived. The French context of the building trade is at present characterized by an increase of the quality requirements and by a reduction of the conception and realization delays. This induces the building sector to look for new modes of cooperation as they already exist in industry and services. With a few exceptions, the concurrent engineering tools taken from these sectors are not used in building projects. We make the assumption that the lack of use of these tools is due to the non-fitting of the common existing tools to the specificities of our sector. The solution we propose give a relational vision of the cooperation and the interactions existing during the processes of conception-construction in architectural works. Our first interest point concerns the representation of the actors, the documents and the assignments as a relational network and not as a hierarchical tree, mostly used in the groupware tools. In a second point, we use this relational network to produce a graphic and dynamic representation of the projects. The goal of this method is to reinforce the co-operation and the group awareness by supplying to the actors a good vision of the project evolution in order to increase the conception quality.
keywords	Concurrent Engineering, Groupware, Project Management, Relational Model, Awareness
series	eCAADe
last changed	2022/06/07 07:50

_id	bb4f
authors	He, Jie and Tsou Jin-Yeu
year	2001
title	GIS-based Visual Perception Analysis of Urban Natural Landscape for Urban Planning Supporting: A Case Study of Jinzishan Hill Region
doi	https://doi.org/10.52842/conf.ecaade.2001.505
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 505-510
summary	In this paper we present a GIS-based system prototype in evaluating visual perception quality of natural landscape within urban environment. Through a case study, we demonstrate the entire procedure which includes data modification, model making, viewshed and view sensibility analysis as well as design aiding presentation of this system. This system prototype offers a calculatable and visulizable technique to evaluate the visual quality of urban natural landscape in either actual situation or planning future. Furthermore, we collaborate with local professional organization in a real urban site study to preparing regional planning instruction items by means of this system.
keywords	GIS, Urban Natural Landscape, Visual Perception, Viewshed, Jinzishan
series	eCAADe
email
last changed	2022/06/07 07:49

_id	d146
authors	He, Jie
year	2001
title	CAD Study in Visual Analysis of the Visual Sustainability for China Urban Natural Landscape Planning
source	Chinese University of Hong Kong
summary	In this thesis a GIS-based CAD system prototype of evaluating visual quality of urban natural landscape environment is presented. This prototype is an indispensable component of the integrative Visual Sustainability research, and offers a calculable and visualizable technique to urban visual natural landscape assessment. This scientific method provides precise data to estimate the visibility of natural landscape in urban construction actuality. Furthermore, it can also work out supporting information for maintaining and protecting valuable visual landscape resources in further planning. Introduction of this methodology intends to improve the natural landscape cooperation in China urban planning through visual protection. Combining with popular CAD software such as AutoCAD and Microstation, the research team uses ArcView GIS software and its 3D Analyst extension to accomplish a set of research procedure, which includes data modification, model making, viewshed and view sensibility analysis. In addition, this system can create simultaneous 3D scenes or hire other information media as reference tools for professional analysis, design consultation and intercommunication. The core technologies of this proposed system are viewshed calculation and overlay analysis. In viewshed analysis, human visual characteristics are simulated by a series of ergonomics parameters of viewpoints. Viewshed of each viewpoint can be calculated into vector data and mapped by polygons identifying which region is visible and which is not. Overlay function of the proposed system is used in visual sensibility analysis to achieve the division of higher visual sensible area which indicates the common visible area from different viewpoints. Additionally, viewshed maps and visual sensibility results can add more information to mark out the areas that can satisfy certain visual parameters such as appropriate visual angle or visual distance. These overlaying results can visualized the visible areas into hierarchical visual perception quality categories in order to define the visual landscape significance of particular planning regions. A case study was operated to evaluate this system. The case is in Zhongshan city, Guangdong Province of China. Jinzishan hill region is the study site that picked by collaborating discussion of research team and the local government. It is located on the edge of urban built-up area. Jinzishan massif is the prominent landscape element of the surrounding environment. There are three topics in Jinzishan visual perception in this paper. The first topic is the visual quality evaluation of the intersections of its surrounding road system. The second is the integrated visual perception of two main roads called Qiwandao and Bo‚Äôailu. Finally is the analysis of the hill skyline visual quality in surrounding area. The analysis results in GIS vector data can be converted into popular data format and combined with other spatial information for practical application. And comments for future urban planning are collected and analyzed by professional responses to the computer-generated information investigation.
keywords	Natural Landscaping; Computer-Aided Design; Landscape Architecture; City Planning; Geographic Information Systems
series	thesis:MSc
email
last changed	2003/02/12 22:37

_id	f1c4
authors	Holmgren, S., Rüdiger, B. and Tournay, B.
year	2001
title	The 3D-City Model – A New Space
doi	https://doi.org/10.52842/conf.ecaade.2001.430
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 430-435
summary	We have worked with the construction and use of 3D city models for about ten years. This work has given us valuable experience concerning model methodology. In addition to this collection of knowledge, our perception of the concept of city models has changed radically. In order to explain this shift in paradigms we begin by describing some of the concrete models we have made, showing the relationship between model structure (methodology and content) and model use. We also describe the projects we are working on at present in order to illustrate new ideas concerning the potential development of 3D city models.
keywords	Digital 3D City Model, Urban Regeneration, Participatory Design, On Line Community
series	eCAADe
email
last changed	2022/06/07 07:50

_id	25b2
authors	Kosasih, Sahrika
year	2001
title	The Research on the Relevance of the Computer Applications - Experiences from Indonesia
doi	https://doi.org/10.52842/conf.ecaade.2001.282
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 282-287
summary	Although CAD subject still is a subsidiary subject, there has been higher interest of students in the subject. Of 300 students at Department of Architecture, 50 students take the subject every semester. The research on the relevance of the computer application can be carried out thanking to the establishment of a CAD laboratory as a supporting facility of the Department of Architecture which was established in 1999 through QUE Program (Quality Undergraduate Educative) granted by the World Bank in undergraduate program proposal selection in Indonesia. It can therefore be identified how well students can improve their talents and skills in design subject. The laboratory is used not only in educational activities, it is also used to develop the computer application in design especially 2D and 3D design and the perspective drawing presentation.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	7c0e
authors	Koutamanis, Alexander and Den Hartog, Peter
year	2001
title	Simulation and representation. Learning from airflow analyses in buildings
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 657-666
summary	The simulation of environmental aspects is a current priority in design research and practice. The availability of relatively efficient and reliable simulation systems and the emphasis on environmental aspects throughout a building’s lifecycle combine to stimulate exploration of aspects such as lighting and air quality by computational means. Nevertheless, a frequent complaint is that the addition of such simulations makes design information processing timeconsuming and cumbersome, thereby increasing uncertainty and indecision. Therefore, it is imperative that simulation is integrated in the strategies and tools normally used by the digitally-minded architect. In this respect a central issue is the relations between the simulation and the design representation used as connecting tissue for the whole design environment. Input of design information in the simulation means identification of relevant objects, aspects, parts and properties of these objects, as well as relationships between objects. The explicit description of objects such as spaces, doors and windows in the design representation allows for ready extraction of relevant information, including automatic recognition of relationships such as adjacency between a window and a space. The addition of information specific to the airflow analysis was resolved by the extension of the representation to cover front-end service components such as inlets and outlets and general properties (annotations) such as activities accommodated in a space and the primary choice of cooling and heating subsystems. The design representation is also the obvious target for the output of the simulation (feedback). Visualization of airflow in terms of the resulting voxels makes effortless and enjoyable viewing but merely allowing the visualization to coexist with the representation of spaces and building elements does not provide design guidance. One way of achieving that is by treating spaces not as integral entities but as containers of relevant surfaces. These surfaces determine the adaptive subdivision of the space and function as attractors for voxel clustering.
keywords	Simulation, Representation, Visualization
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	4a1a
authors	Laird, J.E.
year	2001
title	Using Computer Game to Develop Advanced AI
source	Computer, 34 (7), July pp. 70-75
summary	Although computer and video games have existed for fewer than 40 years, they are already serious business. Entertainment software, the entertainment industry's fastest growing segment, currently generates sales surpassing the film industry's gross revenues. Computer games have significantly affected personal computer sales, providing the initial application for CD-ROMs, driving advancements in graphics technology, and motivating the purchase of ever faster machines. Next-generation computer game consoles are extending this trend, with Sony and Toshiba spending $2 billion to develop the Playstation 2 and Microsoft planning to spend more than $500 million just to market its Xbox console [1]. These investments have paid off. In the past five years, the quality and complexity of computer games have advanced significantly. Computer graphics have shown the most noticeable improvement, with the number of polygons rendered in a scene increasing almost exponentially each year, significantly enhancing the games' realism. For example, the original Playstation, released in 1995, renders 300,000 polygons per second, while Sega's Dreamcast, released in 1999, renders 3 million polygons per second. The Playstation 2 sets the current standard, rendering 66 million polygons per second, while projections indicate the Xbox will render more than lOO million polygons per second. Thus, the images on today's $300 game consoles rival or surpass those available on the previous decade's $50,000 computers. The impact of these improvements is evident in the complexity and realism of the environments underlying today's games, from detailed indoor rooms and corridors to vast outdoor landscapes. These games populate the environments with both human and computer controlled characters, making them a rich laboratory for artificial intelligence research into developing intelligent and social autonomous agents. Indeed, computer games offer a fitting subject for serious academic study, undergraduate education, and graduate student and faculty research. Creating and efficiently rendering these environments touches on every topic in a computer science curriculum. The "Teaching Game Design " sidebar describes the benefits and challenges of developing computer game design courses, an increasingly popular field of study
series	journal paper
last changed	2003/04/23 15:50

_id	728a
authors	Mantere, Markku
year	2001
title	Visualization of Flow Data in Photo-realistic Virtual Environment
source	Helsinki University of Technology, Espoo, Finland
summary	Virtual reality technology has been adopted in many different fields and new application areas are searched continuously. At the moment virtual reality has been applied separately for instance to scientific visualization and illustration of architectural spaces. In this work, a photo-realistic room model and a visualization of an air flow inside the room has been combined. The integrated illustrative three-dimensional model is presented within an immersive virtual environment. The first part of the work covers scientific visualization and virtual reality implementation techniques. The visualization review begins with a discussion about human percepion of visual information and proceeds with an introduction to three-dimensional visualization. The focus is on illustration of a flow data produced as a result of a computational simulation. The flow visualization techniques utilizing all three dimensions are discussed and many examples of different graphical elements are presented. Virtual reality is examined from technical solutions point of view. The features having effect on the quality of a virtual experience are discussed and three different commonly used display techniques are introduced. The hardware of Experimental Virtual Environment -facility at Helsinki University of Technology is given as a detailed example. The implementation of a visualization software is described in the applied part of this thesis. Discussion covers the evaluation of different software tools, the tool selection process, and a detailed description of the design principles and implementation of the software. The different visualization solutions are also justified in this part. In the implementation, the real-time system requirements and utilization of all three dimensions have been taken into account. Finally, the results and their meaning are discussed and the performance of the implementation is evaluated. The applied part successfully integrated the room model and the flow visualization in an interactive virtual environment.
keywords	Virtual Environments, Virtual Reality, Flow Visualization, CFD, 3D, Computer Graphics
series	thesis:MSc
last changed	2003/02/12 22:37

_id	avocaad_2001_01
id	avocaad_2001_01
authors	Maria Musat
year	2001
title	3D Intelligent Representations for the Facility Management Practice
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	New field, growing very fast since the nineteen eighties, facility management takes care of our built environment. As owners and users together become more and more aware of the importance that healthy built environment has for their lives, the need for high quality tools to help them manage their buildings, throughout their transformations, are growing in demand. The market is overflowed with 2D applications assembled in different information systems that have no links one to another. Intranets, that offer direct links between alphanumerical and 2D graphical databases, are considered nowadays the top tools for facility management experts. Nevertheless the sophistication of this information systems, we should not forget the fact that built environment is always 3D. Therefore, the representations not only should be 3D as well, but also they should include some of the intelligence that builders and managers have, in order to ease their tasks during the life cycle of the buildings. Health and life of our built environment bases on the quality of the management process. However their importance was pointed in the first paragraph, there are yet no norms to intelligently describe our buildings as to take the most profit of their 3D representations. Both owners and managers seem to be impressed by accurate renderings of the building models. They seem to forget that behind these models, the useful information for the facility management is the appearance of the built environment. No intelligent applications have yet been developed based on this information. Our goal is to examine the facility management specific needs in information and to research and define a coherent norm that could intelligently describe 3D representations of complex buildings for this practice.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	3c71
authors	Maver, Tom and Petric, Jelena
year	2001
title	MEDIA in MEDIATION Prospects for Computer Assisted Design Participation
source	Stellingwerff, Martijn and Verbeke, Johan (Eds.), ACCOLADE - Architecture, Collaboration, Design. Delft University Press (DUP Science) / ISBN 90-407-2216-1 / The Netherlands, pp. 121-134 [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	One of the most consistent, powerful and philosophical ideas which has run like a silk thread through the short and erratic history of the development of computer aided architectural design is that of user participation in the design decision-making process. It is not an idea with which the architectural profession is particularly comfortable but it is, the authors claim, one which is central to the professional ethic and, therefore, to be its ultimate survival. Design decision-making is, if addressed properly, a hugely, complex multi-variate, multi-person process on which precious little serious research has been focused. In the late 1960's the Design Methods Group in the USA and the Design Research Society in the UK formulated paper-based models of the design process and anticipated, in some regards with un-nerving accuracy, the way in which the application of information technologies would impinge beneficially on the process of design decision-making and, therefore, on the quality of the built environment. One concept expressed at that time was as follows: the application of computers to the modelling and prediction of the cost and performance behaviour of alternative design solutions allows subjective value judgements to be better informed and more explicitly audited, and that such subjective value judgements should be made by those most affected by them, i.e. the future owners and users of buildings. This paper is devoted to the critical re-examination of this concept, on the seminal research and development which has kept the notion alive over 30 years, and, how the current advances in multimedia, virtual reality and internet access make its ubiquitous adoption inevitable: in short, Media in Mediation.
series	other
email
last changed	2003/04/16 11:52

_id	78f6
authors	Neto de Faria, José
year	2001
title	BICICLETA IDA: DESENVOLVIMENTO VIRTUAL DE BICICLETA URBANA (Bicycle "Ida":Development of an Urban Bicycle)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 260-261
summary	The project “IDA Bicycle” proposes the virtual study and exploration of the use of digital technologies in the virtual development of an urban bike without the construction of three-dimensional physical models. With the use of graphic platforms and adequate software for each stage of the project it was possible to study new configurations for the object. The new systems of design and simulation of reality makes possible the careful study of aesthetic forms and aerodynamics of the bike. It was also possible to carryout tests that analyzed the structural quality of the object.
series	SIGRADI
email
last changed	2016/03/10 09:56

For more results click below: