Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 717

Reformat results as: short short into frame detailed detailed into frame

_id	1b10
id	1b10
authors	Bay, Joo-Hwa
year	2001
title	Cognitive Biases - The case of tropical architecture
source	Delft University of Technology
summary	This dissertation investigates, i) How cognitive biases (or illusions) may lead to errors in design thinking, ii) Why architects use architectural precedents as heuristics despite such possible errors, and iii) Develops a design tool that can overcome this type of errors through the introduction of a rebuttal mechanism. The mechanism controls biases and improves accuracy in architectural thinking. // The research method applied is interdisciplinary. It employs knowledge from cognitive science, environmental engineering, and architectural theory. The case study approach is also used. The investigation is made in the case of tropical architecture. The investigation of architectural biases draws from work by A. Tversky and D. Kahneman in 1982 on “Heuristics and biases”. According to Tversky and Kahneman, the use of heuristics of representativeness (based on similarity) and availability (based on ease of recall and imaginability) for judgement of probability can result in cognitive biases of illusions of validity and biases due to imaginability respectively. This theory can be used analogically to understand how errors arise in the judgement of environmental behaviour anticipated from various spatial configurations, leading to designs with dysfunctional performances when built. Incomplete information, limited time, and human mental resources make design thinking in practice difficult and impossible to solve. It is not possible to analyse all possible alternative solutions, multiple contingencies, and multiple conflicting demands, as doing so will lead to combinatorial explosion. One of the ways to cope with the difficult design problem is to use precedents as heuristic devices, as shortcuts in design thinking, and at the risk of errors. This is done with analogical, pre-parametric, and qualitative means of thinking, without quantitative calculations. Heuristics can be efficient and reasonably effective, but may not always be good enough or even correct, because they can have associated cognitive biases that lead to errors. Several debiasing strategies are discussed, and one possibility is to introduce a rebuttal mechanism to refocus the designer’s thinking on the negative and opposite outcomes in his judgements, in order to debias these illusions. The research is carried out within the framework of design theory developed by the Design Knowledge System Research Centre, TUDelft. This strategy is tested with an experiment. The results show that the introduction of a rebuttal mechanism can debias and improve design judgements substantially in environmental control. The tool developed has possible applications in design practice and education, and in particular, in the designing of sustainable environments.
keywords	Design bias; Design knowledge; Design rebuttal; Design Precedent; Pre-parametric design; Tropical architecture; Sustainability
series	thesis:PhD
type	normal paper
email
last changed	2006/05/28 07:42

_id	ga0123
id	ga0123
authors	Coates P., Appels, T. Simon, C. and Derix, C.
year	2001
title	Current work at CECA
source	International Conference on Generative Art
summary	The centre for environment computing and architecture continues to experiment with new ways to form, and this paper presents three recent projects from the MSc programme. The three projects all share underlying assumptions about the use of generative algorithms to constructform, using fractal decomposition, lindenmayer systems and the marching cubes algorithm respectively to construct three dimensional "architectural" objects. The data needed to drive the morphology however ranges from formal proportional systems and Genetic L systems programming through swarming systems to perceptive self organising neural nets. In all cases, the projects pose the question what is architectural form. While after Stanford Anderson (Anderson 66) we know it is simplistic to say that it is an automatic outcome of a proper definition of the brief, it is also difficult to accept that the form of a building is an entirely abstract geometrical object existing without recourse to social or contextual justification. In anattempt to resolve these issues we have turned to the study of systems and general system theory as a way of understanding the mechanics of emergence and morphogenesis generally, and the
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	9de9
authors	Laakso, Mikko
year	2001
title	Practical Navigation in Virtual Architectural Environments
source	Helsinki University of Technology, Espoo, Finland
summary	The interest towards virtual reality (VR) and virtual environments (VE) is growing all the time. The applications being developed for VE run a wide spectrum, from games to business planning. This thesis concentrates on navigation in virtual architectural environments, movement in worlds that are very similar to our own. Navigation in a virtual world should be practical, intuitive and simple. Unfortunately, it is very often far from that - for some reason the usability issues in VEs have been usually left with little attention. Currently it is easy for a user to get lost and disoriented when traveling in a VE. This situation must change, navigating through virtual environments can no longer be considered a task reserved for the experts only. 3D-worlds and architectural applications for the common user require new, intuitive interface techniques. This thesis addresses issues related to both physical and cognitive aspects of navigation as well as theoretical models that bind them together. In the technology survey of this thesis, the virtual environment technology is presented. Different visual display systems, new input devices and some 3D user interface design aspects are described. The literature survey section discusses the main issues concerning navigation theory. The two parts of navigation, travel and wayfinding, are described in detail. The major challenges are discussed and some solutions and various research results are presented. A major part of the thesis consists of the description of HCNav, a new navigation system developed by the author. The system was constructed for use in the virtual room at Helsinki University of Technology. The purpose of HCNav is to provide a very intuitive and practical navigation interface. Three new experimental input devices, namely custom wand, data glove and speech recognition system, were tested. Another important part of the work is to evaluate the effectiveness of the HCNav system. A usability test was conducted to determine if the use of HCNav was actually improving navigation performance. Twelve subjects participated in a test where HCNav was compared with a traditional navigation software used previously in the virtual room. The experiment setup has been described and the results analyzed. The results are promising and show that the navigation methods adopted in HCNav are clearly better.
keywords	Virtual Environments, Navigation, Usability
series	thesis:MSc
last changed	2003/02/12 22:37

_id	7e52
authors	Achten, Henri
year	2001
title	Normative Positions in Architectural Design - Deriving and Applying Design Methods
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 263-268
doi	https://doi.org/10.52842/conf.ecaade.2001.263
summary	This paper presents a recently finished course of eight weeks where CAAD skills, design methodology, and architectural theory are combined to discuss possible perspectives on the use of the computer in design, and its influence on architecture. In the course, three contemporary architects were studied; Peter Eisenman, Ben van Berkel, and Greg Lynn. Each was discussed on aspects of ontology (which are the elements of discourse), design method (design process and organization of the process), and the use of the computer (techniques and approaches). These were linked with design theory, architectural theory, and CAD-theory. The reflection on the work of the architects resulted in a number of design methods for each architect. The design methods were adapted to the available technologies in the university as well as to the scope of the exercise, since the period of eight weeks for an exercise cannot compete with design processes in practice that take many participants and much time. The students then applied the design methods to a design task: student housing and an exhibition pavilion on the campus area of the university. The task was so devised, that students could focus on either architectural or urban design level with one of the design methods. Also, the choice of architects and accompanying design methods was made in such a way that students with low, medium, and advanced computer skills could take part in the course and exercise. In a workshop held at the Czech Technical University (CVUT) in Prague, the same procedure was used in a one-week period for a different design task, but in an otherwise almost identical setting with respect to the CAAD software used. The methods and material were easily transferred to the other setting. The students were able to cope with the task and produced surprising results in the short time span available. The paper will provide an overview of the course, discuss the pedagogical implications of the work, and discuss how this particular work can be generalized to incorporate other architects and approaches.
keywords	CAAD: Design Methods, Pedagogy
series	eCAADe
email
last changed	2022/06/07 07:54

_id	avocaad_2001_14
id	avocaad_2001_14
authors	Adam Jakimowicz
year	2001
title	Non-Linear Postrationalisation: Architectural Values Emergence in a Teamwork Interpretation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The paper presents the outcomes of the experiment being conducted at the Faculty of Architecture in Bialystok, which derives form three main sources: a new course of architectural composition by computer modelling, developed and conducted in Bialystok postrationalisation as a formulation platform for new architectural values and theories, applied by e.g. Bernard Tschumi the idea of new values emergence resulting form a teamwork, when placed in an appropriate environment; It is assumed that the work performed first intuitively, can be later seriously interpreted, and to some extent rationalised, verbalised, described. With no doubt we can state, that in creative parts of architectural activities, very often decision are taken intuitively (form design). So this ‘procedure’ of postrationalisation of intuitively undertaken efforts and results seems to be very important –when trying to explain ideas. This kind of activity is also very important during the first years of architectural education. In case of this experiment, the students’ works from the course of architectural composition are taken as a base and subjects for interpretation, and values research. However, when at first, individual works are being interpreted by their authors, at the latter stage, the teams are to be formed. The aim of the teamwork is to present individual works, analyse them, find common value(s), and represent it (them) in an appropriate, creative way. The ideal environment to perform this work is hypertext based internet, because the non-linearity of team interpretations is unavoidable. On the other hand, the digital input data (computer models) is a very appropriate initial material to be used for hypermedia development. The experiment is to analyse the specific of the following: the self-influence of the group on the individual work ‘qualification’, mutual influence of the team members on their own work interpretation, the influence of the digital non-linear environment on the final outcome definition. The added value of hypertext in architectural groupwork digital performance shall be examined and described. A new value of individualised, though group based, non-linearity of expression will be presented and concluded.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	6d7d
id	6d7d
authors	Aken, J. van
year	2001
title	DOMAIN INDEPENDENT DESIGN THEORY
source	Achten, H.H., de Vries, B. and Hennessey, J. (eds). Design Research in the Netherlands 2000, 9-17
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN2000_vanAken.pdf
last changed	2005/10/12 15:32

_id	55fb
id	55fb
authors	Bax, T. and Trum, H.
year	2001
title	A BUILDING DESIGN PROCESS MODEL ACCORDING TO DOMAIN THEORY
source	Achten, H.H., de Vries, B. and Hennessey, J. (eds). Design Research in the Netherlands 2000, 19-30
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN2000_Bax_Trum.pdf
last changed	2005/10/12 15:32

_id	d9f0
authors	Bhavnani, S.K., Reif, F. and John, B.E.
year	2001
title	Beyond Command Knowledge: Identifying and Teaching Strategic Knowledge for Using Complex Computer Applications
source	Proceedings of CHI' 01 (2001), 229-236
summary	Despite experience, many users do not make efficient use of complex computer applications. We argue that this is caused by a lack of strategic knowledge that is difficult to acquire just by knowing how to use commands. To address this problem, we present efficient and general strategies for using computer applications, and identify the components of strategic knowledge required to use them. We propose a framework for teaching strategic knowledge, and show how we implemented it in a course for freshman students. In a controlled study, we compared our approach to the traditional approach of just teaching commands. The results show that efficient and general strategies can in fact be taught to students of diverse backgrounds in a limited time without harming command knowledge. The experiment also pinpointed those strategies that can be automatically learned just from learning commands, and those that require more practice than we provided. These results are important to universities and companies that wish to foster more efficient use of complex computer applications.
keywords	Strategies; Training; Instruction; GOMS
series	other
email
last changed	2003/11/21 15:16

_id	81ba
authors	Bilda, Zafer
year	2001
title	Designers‚ Cognition in Traditional versus Digital Media during Conceptual Design
source	Bilkent University Ankara Turkey
summary	Designers depend on representations to externalize their design thoughts. External representations are usually in the form of sketches (referred to as traditional media) in architectural design during the conceptual design. There are also attempts to integrate the use of digital representations into the conceptual design in order to construct a digital design medium. This thesis aims at gaining an insight on designers’ cognitive processes while sketching in digital versus traditional media. The analysis of cognitive processes of designers based on their protocols is necessary to reveal their design behavior in both media. An experiment was designed employing six interior architects (at Bilkent University) solving an interior space planning problem by changing the design media they work with. In order to encode the design behavior, a coding scheme was utilized so that inspecting both the design activity and the responses to media transition was possible in terms of primitive cognitive actions of designers. The analyses of the coding scheme constituents, which are namely segmentation and cognitive action categories enabled a comparative study demonstrating the effect of the use of different media in conceptual design phase. The results depicted that traditional media had advantages over the digital media such as supporting perception of visual-spatial features, and organizational relations of the design, production of alternative solutions and better conception of the design problem. These results also emerged implications for the computer aid in architectural design to support the conceptual phase of the design process.
keywords	Design Cognition; Protocol Analysis; Sketching; Digital Media
series	thesis:MSc
email
last changed	2003/05/01 20:14

_id	2006_000
id	2006_000
authors	Bourdakis, Vassilis and Charitos, Dimitris (eds.)
year	2006
title	Communicating Space(s)
source	24th eCAADe Conference Proceedings [ISBN 0-9541183-5-9], Volos (Greece) 6-9 September 2006, 914 p.
doi	https://doi.org/10.52842/conf.ecaade.2006
summary	The theme of this conference builds on and investigates the pre-existing and endlessly unfolding relationship between two domains of scientific inquiry: Architecture, urban design and planning, environmental design, geography and Social theory, media and communication studies, political science, cultural studies and social anthropology. Architectural design involves communication and could thus be partly considered a communicational activity. Designers (or not) see architectural designs, implicitly, as carriers of information and symbolic content; similarly buildings and urban environments have been “read” and interpreted by many (usu- ally not architects) as cultural texts. At the same time, social and cultural studies have studied buildings and cities, as contexts for social and cultural activities and life in general, from their mundane expression of “everyday life” (Highmore, 2001) to elite expressions of artistic creativity and performance. Information and communication technologies (ICTs) support both of these levels of scientific inquiry in many ways. Most importantly however, ICTs need design studies, architectural and visual design, social and cultural studies in their quest to create aesthetically pleasing, ergonomically efficient and functional ICT sys- tems; this need for interdisciplinarity is best articulated by the low quality of most on-line content and applica- tions published on the web.
series	eCAADe
type	normal paper
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	ga0108
id	ga0108
authors	Caicco, Gregory P.
year	2001
title	Cunning Crafts or Poetic Place-Making? Towards a Historiography of Generative Art
source	International Conference on Generative Art
summary	This paper begins by considering the meaning and relationship between generativity and art. From there an historical analysis of these terms maps out the philosophical terrain of generative art in practice and theory. It is hypothesized that the degree to which a generativity, or birthing, may be understood as inherent in art understood as a poetic making, is the degree to which the term generative becomes a redundant qualifier of the term art. An argument is then made that art and art-making as a poetic production has an ethical vocation to critique its sources and its media in order to imagine worlds where the marginalized other, as other, is received. As a result, the unqualified adoption of computer, machine, biologicalor chemical media, as well as the mathematic or pragmatic instructions that define the execution of their works, needs to be questioned.I conclude with an historiographical examination of the Babylonian abacus and the medieval ars memoritiva, in particular, Ramon Lull’s 1274 figura universalis. Even though computing historians have claimed these as proto-computers, a deeper examination of their meaning, use and context reveal a fundamentally mimetic vocation that provides the possibility of poetic place-making, as an ethics, which is otherwise absent in thecontemporary microprocessor. The question is therefore raised whether the works presented at “generative art” galleries, websites and conferences such as this may make any claim to poetry, ethics or art per se if their use of mathematics and automation remains uncritical.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	2411
authors	Chen, Sheng-Chih
year	2001
title	Analysis of the use of computer media by expert and novice designers
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 71-80
doi	https://doi.org/10.52842/conf.caadria.2001.071
summary	This paper is based on an experiment of protocol analysis. In order to investigate the differences in models designed under various circumstances, the paper attempts to find out how expert and novice designers develop their designs with computer media. It also compares expert designers with their novice counterparts by analyzing and generalizing some cases in their thinking and designing process. Thus a designer who is very familiar with software and have expertise in design must apply different strategies to their design. This is indeed the cause of changes in the process of promoting from a novice to an expert designer. Therefore, the differences between novices and experts can be one of the foci of educating novice designers.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	a808
authors	Cheng, M.-Y. Liang, Y., Wey, C,-M. and Chen, J.-C.
year	2001
title	Technological enhancement and creation of a computer-aided construction system for the shotcreting robot
source	Automation in Construction 10 (4) (2001) pp. 517-526
summary	This paper addresses the technological enhancement of the shotcreting robot. The shotcreting robot has an arm with six degrees of freedoms, which is remotely controlled by an operator. Due to current utilization drawbacks, an improvement plan has been developed in two stages. First, the control system of the semi-automated robot was improved by reducing the number of joysticks from six to two, incorporating a real-time computer simulation model enhanced to identify model feasibility. Second, the robot was enhanced from semi-automated to fully automated. Thus, an automated profile measuring instrument is used to measure the excavated surface and a simulation model calculates the nozzle path for shotcreting. The automated shotcreting robot was completed by integrated the graphical model with the robot control system.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	b2df
authors	Chiu, Mao-Lin
year	2001
title	When and where is design situated in case-based design?
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 3-13
doi	https://doi.org/10.52842/conf.caadria.2001.003
summary	This paper depicts the process of design operations in situated design by a cognitive approach. A serial of similar sites are tested in a design experiment to identify the design situations and make case adaptation, and two groups of designers are examined in their design moves in case-based design by freehand sketches or computers respectively. The comparative analysis from the above observation and implications are presented.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	04f2
authors	Cimerman, Benjamin
year	2001
title	Clients, architects, houses and computers: Experiment and reflection on new roles and relationships in design
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 100-109
doi	https://doi.org/10.52842/conf.acadia.2001.100
summary	This paper reports on recent work that focused on the potential impact of standard computer technology on the relationship between client and architect in the context of residential design. A study of software applications a client could use to develop and evaluate ideas exposed the dearth of software available for the design of spatial complexity by individuals without advanced computer skills, and led to the design of a specific piece of software we call “Space Modeler.” It was prototyped using off-the-shelf virtual reality technology, and tested by a group of freshmen students. The paper discusses the specificities of the software and provides analysis and reflection based on the results of the test, both in terms of design artifacts and users’ comments. The paper concludes that the evolution of the interface to electronic environments is a matter of interest for those concerned with rethinking the training, role and activity of the architect. In the near future prospective homeowners may be able to experience and experiment with the space of their home before it is built. How can the profession embrace new information technology developments and appropriate them for the benefits of society at large?
keywords	Design Software, Design Participation, Visualization, Simulation
series	ACADIA
email
last changed	2022/06/07 07:52

_id	ea46
authors	Colajanni B., Concialdi, S. and Pellitteri, G.
year	2001
title	Construction or Deconstruction: Which is the Best Way to Learn Architecture?
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 299-304
doi	https://doi.org/10.52842/conf.ecaade.2001.299
summary	The actual shift of the teaching methods from teacher-centred expository methods, to learner-centred exploratory ones. The educational goals are no more the construction of a solid theory knowledge from which the behaviour is driven. It is the acquisition of capabilities and skills directly related to the professional activity. The consequence is that the teacher has the task of endowing the student not only with a large amount of documentation but also with at least suggestions of the way to use it. One of these suggestions is the deconstruction (in a literal and not philosophical sense) as a way of investigating the structure of buildings. In a first phase in order to acquire, through generalisation a systematic knowledge of the way the parts of a building (their subsystems) contribute to the global architectural organism. In a second phase in order to explore buildings of special interest aiming at mastering their peculiar solutions. An example of this method is presented, limited to the spatial analysis only both for brevity sake and for particular difficulties presented.
keywords	Deconstruction, Learn Architecture, Learning By Experience
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	8ff1
authors	Cáceres Jara, Hugo
year	2001
title	EL COLOR DIGITAL EN EL DISEÑO DE TESELACIONES PERIODICAS (The Digital Color in the Design of Periodical Teselations)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 64-66
summary	The present study of fundamentally exploratory type tries to examine the distribution of the color in the structures of repetition designed according to the Mathematical Theory of the Tessellations and inspired in the grafphic work of the artist holandes M.C.Escher. The results reached are product of the exercises pedagogicos carried out in the catedra of design of the color of the Design Workshop I, Universidad del Bío-Bío, among the years 1996 and 2000 to pursue a design graphic degree.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	8aef
authors	Dave, Bharat
year	2001
title	Immersive Modeling Environments
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 242-247
doi	https://doi.org/10.52842/conf.acadia.2001.242
summary	The paper describes development of a large-format panoramic display environment. Unlike the ‘window-on-the-world’ metaphor associated with small displays, immersive environments foster a sense of ‘being-in-the-world’. That raises a question: Which aspects of human-computer interaction and information perception scale up or change substantially from small displays to immersive environments? The paper first describes implementation of our display environment, projects being explored in it, and motivates a focused research agenda. Finally, the paper describes an experiment to study differences in spatial judgments by subjects while working in traditional and immersive environments.
keywords	Immersive Modeling, Interaction, Perception, Information Abstractions, Navigation
series	ACADIA
email
last changed	2022/06/07 07:55

For more results click below: