Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 23

Reformat results as: short short into frame detailed detailed into frame

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	510f
authors	Jeng, T.S., Lee, C.H., Chen, C. and Ma, Y.P.
year	2002
title	Interaction and Social Issues in Human-Centered Reactive Environment
doi	https://doi.org/10.52842/conf.caadria.2002.285
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 285-292
summary	In the last decade, the ubiquitous computing paradigm has pushed computation out of desktop and made computational services pervasive throughout a physical environment. In this paper, we describe the work in progress in developing ubiquitous/pervasive applications supporting digital design media presentation. The result of the experimental study in various spatial settings is reported. Finally, we present a model of interaction towards a human-centered reactive environment, and discuss some interaction and social issues that must be addressed in implementation.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	5c07
authors	Lee, H.-L., Liu, Y.-T., Chen, S.-C., Tang, S.-K. and Huang, C.-P., Huang, C.-H., Chang, Y.-L., Chang, K.-W. and Chen, K.-Y.
year	2002
title	A Comparative study of protocol analysis for - Spatiality of a Text-based Cyberspace
doi	https://doi.org/10.52842/conf.ecaade.2002.262
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 262-266
summary	Graduate Institute of Architecture, National Chiao Tung University, Hsinchu, 30050, TAIWAN The adaptation of the word cyberspace (Gibson, 1984) following the emergence of the World Wide Web Internet not only succinctly revolutionized the correlation of time and space but also poised to challenge how we view the existing spatial concept. This research tries to use protocol analysis to examine text-based cyberspace, such as bulletin board, chart rooms and so forth, and the objective of this research is to realize the spatiality of cyberspace through the cognitive point of view, and to compare the differences of the definitions and perception ways of spatiality between people with general domain and in design fields. Finally, we validate the existence of cyberspace, where the process not only allows further categorization of spatial elements concluded from the earlier study, but discover that varied backgrounds can affect how a user defines and perceives cyberspace (Strate, 1999).
series	eCAADe
email
last changed	2022/06/07 07:51

_id	9c41
authors	Ahmad Rafi, M.E., Chee W.K., Mai, N., Ken, T.-K. N. and Sharifah Nur, A.S.A. (Eds.)
year	2002
title	CAADRIA 2002 [Conference Proceedings]
doi	https://doi.org/10.52842/conf.caadria.2002.
source	Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X / Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
summary	Evolution of trends in the realm of computer aided architectural design (CAAD) has seen the convergence of technologies – complementing traditional tools with emerging sciences like Information Technology (IT) and multimedia applications. This appliqué of technologies has not just expanded the scope and enhanced the realm of CAAD research and practice, but is also breaking new frontiers. This creative nexus will be realised at the 7th International Conference on Computer Aided Architectural Design Research In Asia (CAADRIA 2002) to be held at the Faculty of Creative Multimedia, Multimedia University, Malaysia, between 18th-20th April, 2002. CAADRIA 2002’s theme, "Redefining Content", seeks to recognise and infuse these emerging components in the field of architecture and design with a holistic approach towards online, digital and interactive systems. The 41 papers compiled were selected through a blind review process conducted by an international review panel. To reflect the multi-disciplinary nature of this year's conference, the chapters are arranged topically to facilitate the in-depth study of key components. The component sessions include: // Web Design, Database and Networks // CAD, Modelling and Tools // Collaborative Design, Creative Design and Case Reasoning // Simulation and Prototyping // Virtual Environment and Knowledge Management // Design Education, Teaching and Learning /// We believe that this specialised approach will provide a deeper and more illuminating feel of the various components and their critical convergence in the field of architecture and design.
series	CAADRIA
email
more	www.caadria.org
last changed	2022/06/07 07:54

_id	ddssar0214
id	ddssar0214
authors	Al Hassan, F., Trum, H.M.G.J. and Rutten, P.G.S.
year	2002
title	Strategic Briefing A Conceptual Process Model for Building Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Nowadays building design problems are divided in partial discipline related sub-problems. Through targeted and focused attention to sub problems however the awareness of the whole is lost. Each designparticipant gives his sub-problem first priority. In contrast in the past the master builder saw the whole problem as his problem first. Thus the process of seeing the design problem as a whole, as a result ofprioritizing, considering constraints, or strategizing, is lost in today’s practice, basically because this process is a mental and implicit process, that occurred in the brain of the multi-disciplinary master builder.In most cases it is the task of no one in a design team today. The aim of this paper is modeling this conceptual mental implicit process design using System Theory and Cognitive Psychology, trying to determine the structure of the design problem as it occurs intuitively in the brain. The result will provide us with a mechanism that enables us each time to refine a unique common design problem representation. This leads to more effective use of design team capabilities, and forms an essential basis for organizing efforts toward collaborative solutions. Also some kind of clarity is provided as to how proposed solutions are to be judged.
series	DDSS
last changed	2003/11/21 15:15

_id	1389
authors	Bustos, Gabriela L. and Burgos, Iván P.
year	2002
title	Desarrollo y Aplicabilidad de Menús Virtuales en VRML [Architectonic Development and Applicability of Virtual Menus in VRML]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 199-202
summary	The Virtual Reality Modeling Language (VRML), has allowed extend all of its resources and possibilities for Architectural Applications under the same Virtual Reality’s technology platform. In order to take advantages of its possibilities, this resource focus on exposes the development and application of virtual menus in VRML and Java Script as a first step for the creation of Synthetic Environment Laboratory in the faculty of Architecture and Design of University of Zulia, Venezuela. It presents in short, how algorithms were defined to design the menus, the use of a program in Visual Basic that permit addition of virtual menus toany WRL file, without any programming approach, as well as specific samples of applicability of the menus developed in a VRMLenvironment and how they are included in a methodological model of architectural design.
keywords	virtual reality, synthetic environments, architectural design, inmersive projection systems.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ga0220
id	ga0220
authors	Eleni, P., Turner, A. and Thum, R.
year	2002
title	Interacting unities: an agent-based system
source	International Conference on Generative Art
summary	Recently architects have been inspired by Thompson’s Cartesian deformations and Waddington’s flexible topological surface to work within a dynamic field characterized by forces. In this more active space of interactions, movement is the medium through which form evolves. This paper explores the interaction between pedestrians and their environment by regarding it as a process occurring between the two. It is hypothesized that the recurrent interaction between pedestrians and environment can lead to a structural coupling between those elements. Every time a change occurs in each one of them, as an expression of its own structural dynamics, it triggers changes to the other one. An agent-based system has been developed in order to explore that interaction, where the two interacting elements, agents (pedestrians) and environment, are autonomous units with a set of internal rules. The result is a landscape where each agent locally modifies its environment that in turn affects its movement, while the other agents respond to the new environment at a later time, indicating that the phenomenon of stigmergy is possible to take place among interactions with human analogy. It is found that it is the environment’s internal rules that determine the nature and extent of change.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ddssar0210
id	ddssar0210
authors	Friedl, G., Trum, H.M.G.J. and Rutten, P.G.S.
year	2002
title	An Innovative Model of the Building Development ProcessDesign as a Process of Crystallisation
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In the past, models describing the development of artefacts, including buildings, usually were of a linear nature thereby suggesting a sequential path from conception of the artefact to its completion. This has consequences for the sequence of activities in the design and programming phase. However, designing is basically a thinking activity and is as such not bound to the same laws as e.g. the construction process. This must have repercussions for the way the design process is designed andmanaged. The proposed conceptual model of the artefact development process – in this case a building design process – is a kind of framework which is more in accordance with the nature of thinkingactivities. It should stimulate a non-sequential process. The development of a solution to a design problem thus should become a responsive search process driven by insights and creative leaps but guided by the framework the model provides. Furthermore, the model is meant to support the exploration and clarification of the problem as well as to extend the solution space by various means such as the development of scenarios and strategic values as a basis for the realisation of the building project’s goals. This model is an essential element in the development of an innovative approach towards the process design of the building design process. The creation of a building (conception, design and development) is not considered a sequential process but a process of crystallisation with the potential of developing in all directions, thus growing from a conceptual centre outwards.
series	DDSS
last changed	2003/08/07 16:36

_id	ga0204
id	ga0204
authors	García-Salgado, Tomás
year	2002
title	Modular Perspective as a Method for Generative Design
source	International Conference on Generative Art
summary	Apparently there are many methods for perspective but if we categorize them there are just a few. Some criterions of classification relate perspective to the so-called 1-point, 2-point and 3-point methods, others —more formally— to projective geometry, descriptive geometry or vectorial algebra. Of course we cannot forget to mention the early treatises on perspective such as Alberti’s Della Pittura or Piero’s De Prospectiva Pingendi, which escapes any classification. Our aim on this article is not precisely to solve the classification problem rather we propose a new comprehensive method for perspective, capable of 3D representation without using vanishing points.The modular perspective method allows us to work in true three-dimensionality on the perspective plane (PPl). We will explain how to measure directly on the PPl the triad coordinates (x, y, p) of a given point into the visual space, and how to play with the symmetrical planes X and Y (SPl X/Y) in order to generate or recover data. Finally we will explain how to employ modular perspective in generative design formal-process through an example of application.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	8301
authors	Garner, S. and Mann, P.
year	2002
title	Interdisciplinarity: Perceptions of the Value of Computer Supported Collaborative Work in Design for the Built Environment
doi	https://doi.org/10.52842/conf.caadria.2002.221
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 221-228
summary	This paper presents the findings from a study into the current exploitation of CSCW in design for the built environment in the UK. The research is based on responses to a web-based questionnaire. Members of various professions including civil engineers, architects, building services engineers and quantity surveyors were invited to complete the questionnaire. The responses reveal important trends in the breadth and size of project teams at the same time as new pressures are emerging regarding team integration and efficiency. The findings suggest that while CSCW systems may improve project management (e.g. via project documentation) and the exchange of information between team members it has yet to significantly support those activities that characterize integrated collaborative working between disparate specialists. The authors conclude by combining the findings with a wider discussion of the application of CSCW to design activity – appealing for CSCW to go beyond multidisciplinary working to achieve interdisciplinary working.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	heylighen__arcc2003
id	Heylighen _ARCC2003
authors	Heylighen , Ann and Seger, Nicole
year	2002
title	An architectural Shift+F7 - Supporting concept development through design cases
source	Lucie Fontein (ed) ARCC/EAAE Conference on Architectural Research Proceedings, School of Architecture, McGill University, Montreal (Canada), May 22-25, 2002, 10 p. (CD Rom)
summary	This paper describes the linking of Idea Space/E3dAD, a system that captures and interprets the architect’s ideas with DYNAMO, a dynamic memory of design cases, to support concept development in architectural design. So far, a major obstacle for the breakthrough of digital case bases like DYNAMO has been the separateness of these tools from the architect’s working environment. Having to leave this environment to consult a case base inconveniently interrupts the design process. The remedy proposed in this paper was inspired by the Shift+F7 shortcut in Ms Word. Just like this shortcut allows authors to look up synonyms in a thesaurus without having to leave the text, linking Idea Space to DYNAMO enables architects to trigger case retrieval ‘en passant’, that is during the very act of designing.
series	other
email
last changed	2004/03/25 17:59

_id	6cc2
authors	Liew, P.S. and Gero, J.S.
year	2002
title	A Memory System for a Situated Design Agent Based on Constructive Memory
doi	https://doi.org/10.52842/conf.caadria.2002.199
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 199-206
summary	Situated design agents require new types of memory. The design of a memory system for use in such a design agent, based on the notion of constructive memory is proposed. The specification of the memory system is derived from the architecture of a situated design agent. Cognitive studies of the human memory system provide the functional and behavioural characterization of the memory system.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ddssup0212
id	ddssup0212
authors	Nascimento, M.A.P., Francisco, S.D., Souza, L.C.L. and Silva, A.N.R.
year	2002
title	A Multimedia Application to Support Professionals in an EnvironmentallyResponsible Building Design Process
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	One of the problems faced by the design professionals in trying to incorporate thermal and acoustic concerns when designing a building is the quantity and diversity of building materials that can be applied to improve a poor indoor environment and, in many cases, to later reduce energy consumption. The large amount of information on building materials usually provided as documents makes it almost impossible to the designer to compare products. In the light of the stated facts, the objective of this work was the development of a multimedia application, which was thought as a module of a more comprehensive system able to support professionals in an environmentally responsible building design process. The application takes advantage of the ability of computers to handle texts, images, sounds and movies to introduce several building materials and their characteristics to the designers, in an interactive way. The conclusion of this stage shows that rather than being a module of a larger system, the developed application can work as a powerful standalone multimedia catalogue of building materials that have special interest on thermal, acoustic, and thermal-acoustic applications. It is an application that are notonly fundamental in a support system for effective building design, but also a powerful tool for training architecture students as part of an environmentally responsible building design process.
series	DDSS
last changed	2003/08/07 16:36

_id	9e16
authors	Neuckermans, H., Heylighen, A. and Morisse, P.
year	2002
title	Visual Keys to Architectural Design
doi	https://doi.org/10.52842/conf.caadria.2002.175
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 175-182
summary	This paper presents a new mechanism to access and interact with DYNAMO, a collective case base for architectural design developed as a Web-based tool. The system is fully operational since a few years in the context of architectural design education as well as for seminars on architectural theory. We have now developed a set of visual keys structured at the one hand according to the Vitruvian tripartition of architecture: Firmitas (structure, materials,…), Utilitas (building programme,…), Venustas (formal qualities/articulation, spatial configuration,…) to which we added Context (topography, site, budget, climate,...) as a supplementary dimension, and at the other hand including three levels of detail: single spaces, building blocks or master plan entities. Visual keys match the architect’s designerly way of thinking. The visual keys are in fact nothing else than a graphical codification of architecture within the realm of architectural composition. The software, that has been developed so far, does not only allow users to access cases via the keys we have implemented, but it also provides a tool to sketch and submit their own keys.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	b0f9
authors	Peng, C., Chang, D., Blundell-Jones, P. and Lawson, B.
year	2002
title	On an alternative framework for building virtual cities: supporting urban contextual modeling on demand
source	Environment and Planning B: Planning and Design, Vol. 29, pp 87-103, Jan 2002
summary	For various purposes, virtual city applications have been developed around the globe to provide users with online resources and services over the Internet. Following our research on the Sheffield Urban Contextual Databank (SUCoD) project, this paper presents an alternative framework for building virtual cities, which goes beyond conventional static urban modelling. A three-tier system framework is described in conjunction with the design and implementation of the SUCoD prototype. We demonstrate SUCoD's novel functionalities by showing that complex urban contextual information sets, including three-dimensional interactive models, multilayer interactive maps, and hypermedia documents, can be retrieved dynamically by user-specified urban contextual attributes, spatial loca- tions, and boundaries. The three-tier framework also facilitates system development in an extensible way, allowing continuous parallel extensions of system functionalities, user-interface components, and contextual data resources. SUCoD's dynamic capabilities are considered crucial in its future uses for urban contextual modelling on demand in relation to the past, present, and future of the City of Sheffield.
series	journal paper
last changed	2003/04/23 15:50

_id	bff9
authors	Proctor, George (Ed.)
year	2002
title	ACADIA 2002 [Conference Proceedings]
doi	https://doi.org/10.52842/conf.acadia.2002
source	Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X / Pomona (California) 24-27 October 2002, 446 p.
summary	The 2002 ACADIA conference finds digital tec_nology ubiquitous as the Association for Computer Aided Design in Architecture moves into its third decade. The organization of ACADIA is on the threshold of restating its mission. After 20 years, many of the organization’s initial objectives have been achieved. ACADIA members have been instrumental in the development of design software, and in bringing computers and digital technology into architectural practice and design school curriculum. At first, ACADIAns faced the debate over the appropriateness and utility of digital technology in the disciplines of architecture, planning and building science. Today the use of computers and information technology is widely accepted by architects and CAAD and digital technology have brought profound change to design practice. The debate in ACADIA has long since moved from "should we use this technology" to "how", "for what" and "why". Now that many practitioners, learning institutions and professional organizations have taken up the call, ACADIA must restate its mission, if it wishes to remain “distinct”. This does not mean that the work of ACADIA is complete. Much remains to be done and much more needs to be improved. ACADIA’s Mission Statement places particular focus on “education and the software, hardware and pedagogy involved in education.” And “(t)he organization is also committed to the research and development of computer aides that enhance design creativity, and that aim at contributing to the construction of humane physical environments.” These are the areas that continue to evolve, grow and provide for ACADIA’s continued relevance. The ACADIA 2002 conference theme reflects the state of digital technology’s application to the discipline, as much as it refers to ACADIA’s future. With the general acceptance of digital technology and CAAD, we have arrived at a place where the work of great interest and relevance lies in the space between what is digital and what is analog. The environments of real space and cyberspace have in a very short time become so intertwined that the space between real and virtual (not to be confused with reality and fantasy) is becoming indistinguishable. You cannot eat, travel, use public utilities, bank, shop, vacation or recreate without at the very least coming into contact with or passing through information space. The landscape between these two environments has become a cultural phenomenon for those societies with access to the Internet and information networks. And while the computer and World Wide Web have empowered individuals, the collective impact of the technology holds all the potential and problems that similarly emerged in other technology induced landscapes. Consider this last point in the context of ACADIA’s stated mission to “enhance design creativity while contributing to the construction of humane physical environments.” And you can see why many of the 260 initial submissions to this conference were in the area of design artifacts and design methodology, providing evidence that ACADIA’s mission remains relevant and in accord with the trends of research and professional creative activity.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	d372
authors	Voigt, A., Schmidinger, E., Walchhofer, H.P. and Linzer, H.
year	2002
title	Conception of Urban Space – Simulators Supporting Planning Work
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 87-90
summary	Experimenting with “space”, joint exploring solution possibilities with all those concerned and the anticipation of the future involving as little risks as possible are important functions of space-related simulation contributing to increasing of knowledge, decision-finding and communication throughout the planning process. Questions as to conception of urban space, the modeling of urban volume and urban design, the improvement of spatial match (“fit”) and workability regarding utilization (”fitness for use”) call for suited simulators supporting planning work. All planning phases of urban-spatial planning processes are to benefit thereby: understanding is promoted, spatial characteristics developed, preservation- and renewal priorities are deduced, variants are conceived, spatial impact analysis of spatial ideas and graphic communication are to act as basis fordecision-finding. The present contribution also discusses the application possibilities of the “CAVE” (space with threedimensional image projections) as planning tool. The following questions are to be covered: qualitative and quantitative aspects of modeling of urban space, planning benefits arising from differing “levels of details” (LOD’s), “navigation in” and “interaction with urban spaces”, testing in line with requirements and examples of planning practice as well as current research- and development needs.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ga0234
id	ga0234
authors	Yingfei, W., Mingxi, T., Frazer, J.H., Shouqian, S. and Yunhe, P.
year	2002
title	A collaborative platform supporting graphic pattern design and reuse of design knowledge
source	International Conference on Generative Art
summary	A pattern generation system based on an object-oriented pattern knowledge representation method developed previously in Zhejiang University is introduced. We evaluate the effectiveness of this system from authors’ current new research perspective in the Design Technology Research Centre of the Hong Kong Polytechnic University. We then put forward a new platform model to support graphical pattern design emphasising ethnic minority culture. The purpose of building this new platform is to increase the ability of the system in supporting collaborative design. New methods are developed for representing patterns as well as the knowledge about how they can be reused in design applications. In this paper the method for element dynamic classification, knowledge representation of pattern design and the system architecture are introduced.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

For more results click below: