Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 511

Reformat results as: short short into frame detailed detailed into frame

_id	ddssar0224
id	ddssar0224
authors	Mardjono, F., Trum, H.M.G.J. and Janssen, J.
year	2002
title	Development of a Decision Support Tool for Bamboo Building Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The design process of a bamboo building is sometimes very complex for building designers, since there is no accepted design methodology for it. This process may be caused by a lack of relevant information provided to the designer. Based on this issue, this paper proposes a decision support system for application in bamboo building design that might be helpful for the designer in his/her design process. For this purpose, a decision support tool for bamboo building design process is being developed. Thedevelopment of the tool uses approaches, i.e. a taxonomy of bamboo building to identify the design problems, IDEFÆ to model the decision support tool, and develops a dedicated tool for Bamboo building design process. This tool has been tested in an international bamboo-housing workshop, hence results, suggestions, and recommendations from the workshop will be analysed. With this tool, the bamboo-building designer can make a bamboo building design in a systematic way. This tool also helpsthe designer to be as best informed, explicit, correct, and complete as possible during the design process.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar0214
id	ddssar0214
authors	Al Hassan, F., Trum, H.M.G.J. and Rutten, P.G.S.
year	2002
title	Strategic Briefing A Conceptual Process Model for Building Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Nowadays building design problems are divided in partial discipline related sub-problems. Through targeted and focused attention to sub problems however the awareness of the whole is lost. Each designparticipant gives his sub-problem first priority. In contrast in the past the master builder saw the whole problem as his problem first. Thus the process of seeing the design problem as a whole, as a result ofprioritizing, considering constraints, or strategizing, is lost in today’s practice, basically because this process is a mental and implicit process, that occurred in the brain of the multi-disciplinary master builder.In most cases it is the task of no one in a design team today. The aim of this paper is modeling this conceptual mental implicit process design using System Theory and Cognitive Psychology, trying to determine the structure of the design problem as it occurs intuitively in the brain. The result will provide us with a mechanism that enables us each time to refine a unique common design problem representation. This leads to more effective use of design team capabilities, and forms an essential basis for organizing efforts toward collaborative solutions. Also some kind of clarity is provided as to how proposed solutions are to be judged.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssar0203
id	ddssar0203
authors	Alkass, Sabah and Jrade, Ahmad
year	2002
title	A Web-Based Virtual Reality Model for Preliminary Estimates of Hi-Rise Building Projects
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Cost estimating of a construction project at its early stage is considered to be very important task since it will be used as a base to commit or otherwise not to commit funds to that project. Preparation of a reliableand realistic preliminary estimate to aid the decision makers to commit funds for a specific project is a complicated assignment. Traditional methods and operations produced unsatisfactory aid due to lack ofaccuracy especially in the pre-design stage of a project. This participates in the increase of percentage of bankruptcy in the construction industry, which has dramatically climbed up and ranked as 15 percent of thewhole bankruptcies claimed in Canada (Statistic Canada 1998). This paper presents a methodology for developing and a Web-based model to automate preliminary cost estimates for hi-rise buildings. This is achieved by integrating a database with design drawings in a Virtual Reality (VR) environment. The model will automatically generate preliminary estimates after modifying a 3D CAD drawing. It provides the user the option to visualize and simulate the drawing and its cost data through VR environment. Having done that, it will allow owners, architects and cost engineers to view a constructed building project, change its geometric objects and shapes, and accordingly generate a new conceptual cost estimate.
series	DDSS
last changed	2003/11/21 15:15

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	b74f
authors	Dijkstra, Jan and Timmermans, Harry
year	2002
title	Towards a multi-agent model for visualizing simulated user behavior to support the assessment of design performance
source	Automation in Construction 11 (2) (2002) pp. 135-145
summary	We introduce the outline of a multi-agent model that can be used for visualizing simulated user behavior to support the assessment of design performance. We will consider various performance indicators of building environments, which are related to user reaction to design decisions. This system may serve as a media tool in the design process for a better understanding of what the design will look like, especially for those cases where design or planning decisions will affect the behavior of individuals. The system is based on cellular automata and multi-agent simulation technology. The system simulates how agents move around in a particular 3D (or 2D) environment, in which space is represented as a lattice of cells. Agents represent objects or people with their own behavior, moving over the network. Each agent will be located in a simulated space, based on the cellular automata grid. Each iteration of the simulation is based on a parallel update of the agents conforming local rules. Agents positioned within an environment will need sensors to perceive their local neighborhood and some means with which to affect the environment. In this way, autonomous individuals and the interaction between them can be simulated by the system. As a result, designers can use the system to assess the likely consequences of their design decisions on user behavior. We think that the system provides a potentially valuable tool to support design and decision-making processes, related to user behavior in architecture and urban planning.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ddssar0210
id	ddssar0210
authors	Friedl, G., Trum, H.M.G.J. and Rutten, P.G.S.
year	2002
title	An Innovative Model of the Building Development ProcessDesign as a Process of Crystallisation
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In the past, models describing the development of artefacts, including buildings, usually were of a linear nature thereby suggesting a sequential path from conception of the artefact to its completion. This has consequences for the sequence of activities in the design and programming phase. However, designing is basically a thinking activity and is as such not bound to the same laws as e.g. the construction process. This must have repercussions for the way the design process is designed andmanaged. The proposed conceptual model of the artefact development process – in this case a building design process – is a kind of framework which is more in accordance with the nature of thinkingactivities. It should stimulate a non-sequential process. The development of a solution to a design problem thus should become a responsive search process driven by insights and creative leaps but guided by the framework the model provides. Furthermore, the model is meant to support the exploration and clarification of the problem as well as to extend the solution space by various means such as the development of scenarios and strategic values as a basis for the realisation of the building project’s goals. This model is an essential element in the development of an innovative approach towards the process design of the building design process. The creation of a building (conception, design and development) is not considered a sequential process but a process of crystallisation with the potential of developing in all directions, thus growing from a conceptual centre outwards.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar0221
id	ddssar0221
authors	Maassen, W., De Groot, E. and Scholten, J.E.
year	2002
title	Design of an Early Support Tool For Building Services Design:A Design Tool Study
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	There is a need for Dutch design support tools for building services that can be used in early design stages. TNO Building and Construction Research has therefore initiated the research project described here. The project will result in a model for a design support tool for early design of building services in the Netherlands. This tool should make it possible to quickly compare alternative conceptual design solutions and to visualize possible consequences of the underlying design decisions.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar0223
id	ddssar0223
authors	Mahdavi, A, Suter G. and Ries, R.
year	2002
title	A Representation Scheme for Integrated Building Performance Analysis
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	This paper presents a representational scheme for integrated building performance analysis. The underlying research work was motivated by the need for seamless exchange of structured design information.A comprehensive and widely accepted industry standard suitable for exchanging design information among the various AEC (Architecture/Engineering/Construction) applications has yet to emerge. As a contribution to this on-going discussion, we present a specific approach to the integration problem in building product modeling. This approach can be viewed as pragmatic or bottom-up in the sense that itwas driven by the informational needs of related individual domains (particularly in the early stages of design) rather than by a quest for a universally applicable solution. In this paper, we describe a schemawhich emerged from the SEMPER effort, a multi-year project aimed at supporting detailed performance analysis for early design in the energy, life-cycle analysis, lighting, and thermal comfort domains. Thisschema relies on a representational division of labor between a shared building model, and various disciplinary (domain) models. Specifically, we present a documentation of the shared object model together with disciplinary models for the energy, light, acoustics, and life-cyle assessment domain.
keywords	building product models, building performance, integration
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar0202
id	ddssar0202
authors	Akin, Ömer and Özkaya, Ipek
year	2002
title	Models of Design Requirement
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Case studies show that significant proportions of design errors and failures are linked to poor requirement specification during both early stages of design and as changes occur. Computational requirements engineering as a front-end to design iterations is a promising area addressing theseproblems. In other design disciplines, such as in software engineering, requirement engineering has given significant product improvements. In this paper, we present a state-space representation of requirement models for architectural design. The purpose of requirement modeling in design is tocreate a process by which requirements can be converted into working design solutions through frontend validation. We suggest three models of requirement specification, co-evolutionary [CoM], multiple domain [MDM] and single domain [SDM] models, that can facilitate this effort. Taken together all three models provide a full set of logical permutations of requirement-solution “worlds” and “operations.” We compare each model against the others in terms of facilitating change management and computability.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssup0201
id	ddssup0201
authors	Alexiou, K. and Zamenopoulos, T.
year	2002
title	Artificial Design and Planning Support: Interactive Plan Generation andCoordination in Distributed Decision-Making
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	In this paper we discuss some basic issues pertaining to artificial plan design as a paradigm for architectural design and urban planning support. We present a model for artificial design generation based on learning control methodologies. Plan design is seen as a search for "coordinated" solutions (changes) that satisfy distributed domain requirements and views expressed by human or artificial agents. Learning control is used as a method to search for solutions that direct partial descriptionsproduced by agents, to follow their dynamically defined targets -despite conflicting requirements. The model is simulated for land use and layout plan design, involving decisions for the location and physical configuration of a hypothetical housing and retail development.
series	DDSS
last changed	2003/11/21 15:15

_id	63c3
authors	Burdi, Luciana
year	2002
title	Evaluating the Use of a Web-Based Collaborative Interactive Digital Model (CollABITA) in Supporting the Urban Design Approval Process1
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, III.1-III.15
summary	This research, after analyzing the Urban Development Approval Process in its functionalities and methodologies, is showing the key points at which the process might be supported by new computer technologies, and it establishes a web-based Collaborative Interactive Digital Model (CollABITA Model) that relates and facilitates the graphical representation of the urban design process with some elements of the methodological approach. The CollABITA Model will dramatically facilitate the idea of broadening public participation, and indirectly by this, also collaboration. This new web-based support tool, is focusing on how new Informative Computer Technologies can be used in order to have a more co-operative design process. By utilizing the enormous potential of Internet for informing the process, and software for visualizing its products, the Model will provide an effective support, which will be able to deliver information in various forms to the Designers, Developers, Decision Makers, Agencies and the final user (the Citizens). The Model is concerned with the big challenge of supporting the urban design approval process itself, by exploring different kind of visualizations and communication tools, rather than producing a guide for carrying out the design. CollABITA Model is based on the existent framework structure of the extranet tool already available. Then, more then those, CollABITA Model will try to solve, by adding technical and collaborative functionalities, those issues that are characteristics in the urban design process and that are not jet solved by using one of the software .
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/03/29 10:43

_id	ddssar0209
id	ddssar0209
authors	Datta, Sambit
year	2002
title	Managing Design Knowledge with Mixed-Initiative Dialogue
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	This paper is based on ongoing work in developing interactive interfaces to formal methods for encoding design knowledge. It reports on the development of a shared graphical notation to support user interaction with design knowledge based on mixed-initiative. Mixed-initiativeprovides a model of interaction where both the designer and the knowledge formalism may share responsibility over decisions. The paper discusses how a formal visual notation can support the mixed-initiative mode for developing and managing formal design knowledge. The notation addresses on the dialogue problem between the user and a knowledge basedformalism and illustrates a model of interaction in which the user and the formalism can share and input data through a common shared resource, on a common shared task. The paper demonstrates the use of this notation in common decision tasks and the implications for seamless interaction with design support systems.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar0229
id	ddssar0229
authors	De Vries, B., Jessurun, A.J. and J. Dijkstra, J.
year	2002
title	Conformance Checking by Capturing and Simulating Human Behaviour in the Built Environment
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to model natural human behaviour, it is necessary to capture this behaviour. First, we will start out by modelling behaviour for specific situations, such as taking a seat in a theatre. To capture humanbehaviour, the following experiment is performed: Given a virtual environment, a sufficient number of subjects (real humans) are asked to execute a human task in this virtual environment (e.g. take a seat inthe theatre). Whenever the subject deviates from the shortest path, the system will ask for a clue why this is done. The hypothesis is that the combination of the motion paths and the clues for making/changing decisions will provide decision rules to make reliable predictions about human behaviour under the same conditions when using virtual persons. To test the hypothesis, we propose to use the university’s main conference and presentation hall as a test case. A 3D model and a motion pathgraph are constructed that enables a virtual person to find its way to a selected chair. The clues from the experiment are implemented as decision rules that determine a virtual person’s behaviour. Running thesimulation will result in the following data: Time per person to find a chair, Deviation from the shortest path, Distance covered per person to find a chair, Distribution of seated persons over time and Relocation of persons. To validate the test case, the process of people entering the hall and finding a chair is recorded on videotape. The walking behaviour of the people observed on the video is analysed and compared with the data from the simulation.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar0211
id	ddssar0211
authors	Fröst, Peter
year	2002
title	Interactive Tools for Collaborative Architectural Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Today’s rapidly changing society is continuously developing towards an increased demand for multistakeholder knowledge and influence in the architectural planning and design process. Accordingly, we are working with developing and setting up a partner engaged collaborative design process. It includes active collaboration between users, external partners and designers, and visualizations in conceptual design and scenario building. My research is focusing on integrating visualization technology in theseprocesses by application of digital tools. We have developed a working prototype for an interactive design tool. The prototype is an extremely “easy to use” digital modeling tool called “ForeSite Designer.” With this tool one builds one’s own spatial environment with elements on a 2D surface.With one command the 2D layout is exported to a lit-up 3D/Virtual Reality world in the computer game “Half-Life”. ForeSite Designer has lately been used in a series of workshops together with external users. In these processes ForeSite Designer has played a crucial role as an arena of building spatially arranged concepts of future environments. The results show that it works, and, importantly, promotes a collaborative engagement among the users.
series	DDSS
last changed	2003/08/07 16:36

_id	koshak_phd_dissertation
id	koshak_phd_dissertation
authors	Koshak, N.
year	2002
title	OBJECT-ORIENTED DATA MODELING AND WAREHOUSING TO SUPPORT URBAN DESIGN
source	Ph.D. Dissertation, School of Architecture, Carnegie Mellon University
summary	All over the world, local authorities are moving towards managing and storing urban data in digital form. But the data storage devices used are heterogeneous and typically include relational database management systems (DBMS), GIS and CAD files. As a result, data are present in different locations on different platforms and under different schemas. This poses a problem for software applications meant to support decision-making in urban design that require input from more than one data source. This dissertation demonstrates how data warehousing—combined with object-oriented data modeling—is able to provide a general solution for this problem. Data warehousing is a technique initially developed for business applications, but is equally useful for urban design: The data warehouse constitutes a communication layer between the urban design applications and data sources. It makes the data available through a unified interface that hides the sources themselves and represents that data in terms of a general-purpose, preferably object-oriented, model. The dissertation also describes an implementation prototype of the data model and the data warehouse. The test case of this research is the city of Makkah in Saudi Arabia, which faces significant urban design and planning issues in connection with the pilgrimage (Hajj) that brings millions of visitors to the city every year.
series	thesis:PhD
type	normal paper
email
last changed	2005/09/09 13:10

_id	ddssup0209
id	ddssup0209
authors	Koshak, Nabeel and Flemming, Ulrich
year	2002
title	Object-Oriented Data Modeling and Warehousing to Support Urban Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	All over the world, local authorities are moving towards managing and storing urban data in digital form. But the data storage devices used are heterogeneous and typically include relational database managementsystems (DBMS), GIS and CAD files. As a result, data are present in different locations on different platforms and under different schemas. This poses a problem for software applications meant to supportdecision-making in urban design that require input from more than one data source. We demonstrate in our paper how data warehousing—combined with object-oriented data modeling—is able to provide a general solution for this problem. Data warehousing is a technique initially developed for businessapplications, but is equally useful for urban design: The data warehouse constitutes a communication layer between the urban design applications and data sources. It makes the data available through a unified interface that hides the sources themselves and represents that data in terms of a general-purpose, preferably object-oriented, model. We also describe an implementation prototype that supports different applications. The City of Makkah in Saudi Arabia provides us with real-world data and a context to test our prototype.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup0203
id	ddssup0203
authors	Kovács, L.B., Kotsis, I. and Dobosy, A.
year	2002
title	A Generic Support Module to Site Planning with Road Access
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	The aim of this paper is to present a generic module providing several support functions for site planning. The site will be composed of several building lots in harmony with each other and the surroundings. The site plan should satisfy the goals, conditions, rules and regulations explicitly orimplicitly indicated by the design brief. The maximum size and the placement area for the building on each of the lots are part of the plan. Proper road access should be provided for each of the building lots.A variety of ideas and patterns are used to create unified groups of building lots subject to certain restrictions on size, form and other attributes of the composition. Two basically different approachesfor the road planning will be compared. One of them is space planning first with some preconceptions on the structure of the road network, followed by the actual road formation. The other one starts with planning the road access first - provided that the site is properly divided into subareas. In the second phase of this approach the building lots are formed on each of the sites created by the road network. In both approaches several iterations might be necessary. A logic programming prototype with Prologimplementation is presented. Connection to earlier support modules and ideas for an integrated support system are outlined.
series	DDSS
last changed	2003/08/07 16:36

_id	5c95
authors	Lou, C.W., Kaga, A. and Sasada, T.
year	2002
title	Environmental Design with Huge Landscape in Real-Time Simulation System: Real-time Simulation System to Real Project
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 265-272
doi	https://doi.org/10.52842/conf.caadria.2002.265
summary	This paper is the culmination of a period of studying and participating in certain real project on environmental design with realtime simulation system application. The focus of this paper is on understanding that a generally real-time simulation system, can render a complex scene that consisted by a huge landscape model with millions polygons and building models with thousands details. It is also more than just a collection of unorganized techniques. This paper must dual with issues of scene elements management as a front end that efficiently provide the ability to process complex and moving objects in a physically realistic way. We establish a platform providing good support for the environmental designers.
series	CAADRIA
email
last changed	2022/06/07 07:59

For more results click below: