Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 512

Reformat results as: short short into frame detailed detailed into frame

_id	82ac
authors	Caldas, Luisa Gama and Norford, Leslie K.
year	2002
title	A design optimization tool based on a genetic algorithm
source	Automation in Construction 11 (2) (2002) pp. 173-184
summary	Much interest has been recently devoted to generative processes in design. Advances in computational tools for design applications, coupled with techniques from the field of artificial intelligence, have lead to new possibilities in the way computers can inform and actively interact with the design process.In this paper, we use the concepts of generative and goal-oriented design to propose a computer tool that can help the designer to generate and evaluate certain aspects of a solution towards an optimized behavior of the final configuration. This work focuses mostly on those aspects related to the environmental performance of buildings.Genetic Algorithms (GAs) are applied as a generative and search procedure to look for optimized design solutions in terms of thermal and lighting performance in a building. The GA is first used to generate possible design solutions, which are then evaluated in terms of lighting and thermal behavior using a detailed thermal analysis program (DOE2.1E). The results from the simulations are subsequently used to further guide the GA search towards finding low-energy solutions to the problem under study. Solutions can be visualized using an AutoLisp routine.The specific problem addressed in this study is the placing and sizing of windows in an office building. The same method is applicable to a wide range of design problems like the choice of construction materials, design of shading elements, or sizing of lighting and mechanical systems for buildings.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	7992
id	7992
authors	von Buelow, Peter
year	2002
title	USING EVOLUTIONARY ALGORITHMS TO AID DESIGNERS OF ARCHITECTURAL STRUCTURES
source	Creative evolutionary systems, eds Bentley, Peter & Corne, David, Morgan Kaufmann, pp 315-336
summary	This paper describes the application of an Intelligent Genetic Design Tool (IGDT) in the design of architectural, structural elements. As a computer design aid an IGDT is innovative in its intelligent interaction with the designer. By always submitting multiple solutions for review by the designer, it is less likely to cause design fixation than other optimization techniques, and allows the user greater range in exploring hard-to-code design criteria such as aesthetics. As an example, the design of a cantilever truss is briefly explored. Using the coded optimization criterion of weight, and the designer's non-coded criteria of visual aesthetics and performance, a series of possible designs are explored. The ability of an IGDT to intelligently respond to the designer's preferences in a way that promotes creative thinking on the part of the designer is demonstrated. A final truss design is selected based on the use of the tool. It is concluded that an IGDT offers a significantly different approach to computer aided structural design which has the potential to enhance the user's own creativity in determining a good solution.
keywords	evolutionary form exploration genetic algorithm design
series	book
type	normal paper
email
last changed	2006/04/07 21:55

_id	ecaade2024_230
id	ecaade2024_230
authors	Fekar, Hugo; Novák, Jan; Míèa, Jakub; Žigmundová, Viktória; Suleimanova, Diana; Tsikoliya, Shota; Vasko, Imrich
year	2024
title	Fabrication with Residual Wood through Scanning Optimization and Robotic Milling
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 25–34
summary	The project deals with the use of residual wood of tree stumps and roots through scanning, optimization and robotic milling. Wood logging residue makes up to 50 percent of the trees harvested biomass. (Hakkila and Parikka 2002). Among prevailing strategies is leaving residue on site, and recovering residue for bioenergy. (Perlack and others 2005). The project explores the third strategy, using parts of the logging residue for fabrication, which may reduce the overall amount of wood logging volume. Furthermore approach aims for applying residue in its natural form and taking advantage of specific local characteristics of wood (Desch and Dinwoodie 1996). The project applies the strategy on working with stump and roots of an oak tree. Due to considerations of scale, available milling technics and available resources, chosen goal of the approach is to create a functioning chair prototype. Among the problems of the approach is the complex shape of the residue, uneven quality of wood, varying humidity and contamination with soil. After cleaning and drying, the stump is scanned and a 3D model is created. The 3D model od a stump is confronted with a 3D modelled limits of the goal typology (height, width, length, sitting surface area and overal volume of a chair) and topological optimization algorithm is used to iteratively reach the desired geometry. Unlike in established topological optimization proces, which aims for a minimal volume, the project attempts to achieve required qualities with removing minimal amount of wood. Due to geometric complexity of both stump and goal object, milling with an 6axis industrial robotic arm and a rotary table was chosen as a fabrication method. The object was clamped to the board (then connected to a rotary table) in order to provide precise location and orientation in 3D space. The milling of the object was divided in two parts, with the seating area milled in higher detail. Overall process of working with a residual wood that has potential to be both effective and present aesthetic quality based on individual characteristics of wood. Further development can integrate a generative tool which would streamline the design and fabrication proces further.
keywords	Robotic arm milling, Scanning, Residual wood
series	eCAADe
email
last changed	2024/08/28 14:31

_id	ga0226
id	ga0226
authors	Liu, X., Frazer, Jh. and Tang, M.X.
year	2002
title	A generative design system based on evolutionary and mathematical functions
source	International Conference on Generative Art
summary	Previous work by Professor John Frazer on Evolutionary Architecture provides a basis for the development of a system evolving architectural envelopes in a generic and abstract manner. Recent research by the authors has focused on the implementation of a virtual environment for the automatic generation and exploration of complex forms and architectural envelopes based on solid modelling techniques and the integration of evolutionary algorithms, enhanced computational and mathematical models. Abstract data types are introduced for genotypes in a genetic algorithm order to develop complex models using generative and evolutionary computing techniques. Multi-objective optimisation techniques are employed for defining the fitness function in the evaluation process.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ga0206
id	ga0206
authors	Biles, John A.
year	2002
title	GenJam in Transition: from Genetic Jammer to Generative Jammer
source	International Conference on Generative Art
summary	GenJam, short for Genetic Jammer, is an evolutionary computation (EC) based software agent that models a jazz improviser. Recently GenJam has evolved away from its roots as an interactive genetic algorithm toward its current state as an autonomous generative system. GenJam has retained its chromosome-based representations and mappings, its intelligent selection, crossover and mutation operators, and its real-time interactive performance capabilities. However, it no longer needs any explicit representation of fitness, which arguably makes it no longer an EC system. This paper considers GenJam as a generative art system. Generative art produces “unique and non-repeatable events” that express a designer’s generating idea. The designer’s generating idea defines a species of events, represented in a genetic code. In music, these events could be individual notes, melodic phrases, even entire pieces. In GenJam the events are four-measure phrases, or “licks” in the jazz vernacular. The format for the genetic code, then, defines a species space from which unique individual events can be generated. Uniqueness is important in jazz because improvisation must be spontaneous and “new.” Hence, improvisation is tailor-made for the generative art paradigm, and in fact, one could argue that improvisation is, by definition, the purest example of generative art applied to music. In other words, generative music is improvisation, and GenJam is the Generative Jammer.
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:16

_id	077a
authors	Boucard, D., Huot, S., Colin, Ch., Hégron, G. and Siret, D.
year	2002
title	An Image-based and Knowledge-based System for Efficient Architectural and Urban Modeling
doi	https://doi.org/10.52842/conf.acadia.2002.229
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 229-238
summary	In this paper, we present two user-centered systems aiming at making easier the modeling ofarchitectural and urban scenes by using two different but complementary approaches. The first oneMArINa, an image-based modeler, allows the user to reconstruct urban scenes from one or moregraphical documents. This method focuses more on reconstructing models and is more dedicated tothe production of 3D sketches. The second modeler, MArCo is a knowledge-based modelercontaining the know-from and know-how on classical architecture. It allows the user to modelclassical architectural scenes verifying automatically all the domain rules. Finally, we show howMArINa and MArCo can cooperate providing the user a tool combining efficiently their respectivecapabilities.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	63c3
authors	Burdi, Luciana
year	2002
title	Evaluating the Use of a Web-Based Collaborative Interactive Digital Model (CollABITA) in Supporting the Urban Design Approval Process1
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, III.1-III.15
summary	This research, after analyzing the Urban Development Approval Process in its functionalities and methodologies, is showing the key points at which the process might be supported by new computer technologies, and it establishes a web-based Collaborative Interactive Digital Model (CollABITA Model) that relates and facilitates the graphical representation of the urban design process with some elements of the methodological approach. The CollABITA Model will dramatically facilitate the idea of broadening public participation, and indirectly by this, also collaboration. This new web-based support tool, is focusing on how new Informative Computer Technologies can be used in order to have a more co-operative design process. By utilizing the enormous potential of Internet for informing the process, and software for visualizing its products, the Model will provide an effective support, which will be able to deliver information in various forms to the Designers, Developers, Decision Makers, Agencies and the final user (the Citizens). The Model is concerned with the big challenge of supporting the urban design approval process itself, by exploring different kind of visualizations and communication tools, rather than producing a guide for carrying out the design. CollABITA Model is based on the existent framework structure of the extranet tool already available. Then, more then those, CollABITA Model will try to solve, by adding technical and collaborative functionalities, those issues that are characteristics in the urban design process and that are not jet solved by using one of the software .
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/03/29 10:43

_id	3850
authors	Chitchian, D. and Bekkering, H.
year	2002
title	Urban-CAD, A Tool for Urbanistic Design
doi	https://doi.org/10.52842/conf.ecaade.2002.404
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 404-407
summary	The existing CAD, CAAD programs and design applications hardly support the urbanistic design activities. The conceptual difference between architecture and urbanism necessitates developing new CAD software based on the urbanistic design process. Our developed Urban-CAD system assists designers with urbanistic design activities.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	6e0a
authors	Craig, David Latch and Zimring, Craig
year	2002
title	Support for collaborative design reasoning in shared virtual spaces
source	Automation in Construction 11 (2) (2002) pp. 249-259
summary	This paper discusses collaborative design, emphasizing the elaboration and transformations of a problem space, and the role that unstructured verbal communication and graphic communication can play in these processes. An asynchronous collaborative system, called the Immersive Discussion Tool (IDT), is introduced as a means for supporting productive design exchanges. IDT allows collaborators to reason about 3-D models over the Internet using view-dependent and view-independent diagrammatic marks, dynamic simulations, geometric design surrogates and text annotations. IDT relies on VRML to view the models, with an extensive Java-based interface driving the interactive behavior, including the construction and playback of graphical annotations, the management of threaded discussions, and the management of file input/output. The development and initial implementation of IDT has revealed the difficulty of constructing complex marks in a virtual 3-D space. Possible strategies for dealing with these problems are suggested.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddssar0213
id	ddssar0213
authors	De Groot, Ellie and Paule, Bernard
year	2002
title	DIAL-Europe: New Functionality’s for an Integrated Daylighting Design Tool
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The European project DIAL-Europe started in April 2000 and intends to enhance and to enlarge the capabilities of the LesoDIAL software. The aim of this “Swiss” tool was to give architects relevant information regarding the use of daylight, at the very first stage of the design process. DIAL-Europe focuses on European standards and climatic data. Further, a Heating & Cooling evaluation module and an Artificial Lighting module will be added. The objective of the Heating & Cooling module is to indicate the implications of the user’s design on heating and cooling energy and on thermal comfort.The objective of Artificial Lighting module is to develop a tool that will give an estimation of illuminance values on the work plane and provide guidance on qualitative aspects and visual comfort as well as on switching control and integration with daylight based on generic light sources and luminaires. Furthermore, the scope of the examples of simulated rooms will be increased in order to allow the user to compare their design with more similar cases. This paper will present the state of achievement and give an overview of the first version of the DIAL-Europe software, which will beavailable at the beginning of 2002.
series	DDSS
last changed	2003/08/07 16:36

_id	b74f
authors	Dijkstra, Jan and Timmermans, Harry
year	2002
title	Towards a multi-agent model for visualizing simulated user behavior to support the assessment of design performance
source	Automation in Construction 11 (2) (2002) pp. 135-145
summary	We introduce the outline of a multi-agent model that can be used for visualizing simulated user behavior to support the assessment of design performance. We will consider various performance indicators of building environments, which are related to user reaction to design decisions. This system may serve as a media tool in the design process for a better understanding of what the design will look like, especially for those cases where design or planning decisions will affect the behavior of individuals. The system is based on cellular automata and multi-agent simulation technology. The system simulates how agents move around in a particular 3D (or 2D) environment, in which space is represented as a lattice of cells. Agents represent objects or people with their own behavior, moving over the network. Each agent will be located in a simulated space, based on the cellular automata grid. Each iteration of the simulation is based on a parallel update of the agents conforming local rules. Agents positioned within an environment will need sensors to perceive their local neighborhood and some means with which to affect the environment. In this way, autonomous individuals and the interaction between them can be simulated by the system. As a result, designers can use the system to assess the likely consequences of their design decisions on user behavior. We think that the system provides a potentially valuable tool to support design and decision-making processes, related to user behavior in architecture and urban planning.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ecaade2009_193
id	ecaade2009_193
authors	Frumar, Jerome; Zhou, Yiyi
year	2009
title	Beyond Representation: Real Time Form Finding of Tensegrity Structures with 3d ‘Compressed’ Components
doi	https://doi.org/10.52842/conf.ecaade.2009.021
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 21-30
summary	Tensegrity structures are of interest to architecture and engineering as a practical means to explore lightweight and rapidly deployable modular structures that have a high degree of geometric freedom and formal potency. The notion of tensegrity structures with 3D ‘compressed’ components is introduced and their feasibility is demonstrated through selected physical models. Attempts to further explore the architectural potential of tensegrity structures within a computational environment have proven difficult, as they are statically indeterminate and require form finding procedures to “find a geometry compatible with a self-stress state” (Motro 2002). An overview of tensegrity ‘capable’ software that can be used for architectural design is followed by a discussion that introduces an additional computational method based on particle-spring systems. This approach enables real time manipulation of tensegrity networks. Two projects that utilize this unique tool are described.
wos	WOS:000334282200001
keywords	Form finding, particle-spring, tensegrity, 3D compressed component
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ga0211
id	ga0211
authors	Gartland-Jones, Andrew
year	2002
title	Can a Genetic Algorithm Think Like a Composer?
source	International Conference on Generative Art
summary	There has now been a substantial body of work utilising Genetic Algorithms (GA) for the purpose of musical composition. A common point of discussion is how far GA’s can simulate not just the musical output of human composers, but also the process of composing itself. This paper begins by discussing the suitability of using a GA for composition, and goes on to describe a generative music system (by the author), that utilises a domain specific, knowledge rich GA. The system acts on a supplied 2-bar musical phrase (up to 4 parts), and evolves musical fragments towards a supplied target. The aim is to provide interim points on the evolutionary path, which represents a ‘new’ musical ideas audibly based on the supplied fragments. The paper concludes that the system is able to model at least part of the creative process of composition, and is effective at producing musically successful results. (Audio download sources of its output are included to support this conclusion). The system was used to generate music included in an interactive installation work, exhibited at Brighton Arts Festival 2002, and other applications under developed that use the algorithm are discussed.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	dab0
authors	Halin, G., Hanser, D., Malcurat, O. and Bignon, J.C.
year	2002
title	A relational approach of cooperation in building design
source	International conference on concurrent enterprising, Rome
summary	The methods and models of the concurrent engineering taken from the industry domain are unsuitable for the domain of the construction, which is characterized by a singular context of cooperation. The existing groupware tools can not be directly used in the framework of the architectural conception. They require a high level of definition of procedures and exchanges, which is incompatible with the flexibility of current practices. At first, we present the particularity of the context of the building cooperation, then we illustrate through an experiment the problems put by the use of a groupware tool based on a hierarchical data organization. From this experiment, we justify the interest of building a new model of cooperation where the relational organization of the project is taken into account. The integration of this new dimension allows to propose to the user an adapted vision of the project by taking into account the role he plays inside the project.
series	other
last changed	2003/04/23 15:50

_id	65cb
authors	He, J. and Tsou, J.-Y.
year	2002
title	GIS-Based Visual Perception Assessment of Mountain Skyline: A case study of Jinzishan Hill and the building layout of an adjacent site planning project
doi	https://doi.org/10.52842/conf.caadria.2002.241
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 241-248
summary	In this paper, we present a GIS based approach to evaluate the visual perception quality of mountain skyline. Through computer generated analytical maps and perspectives, this tool can assist planners to define the visual reservation scopes for mountain skyline within urban area. It also offers concrete data supporting for appropriate strategy in building layout or site planning to preserve valuable natural skyline scenery.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	49a6
authors	He, J., Tsou, J.-Y. and Lam, S.
year	2002
title	Potential of Using a GIS-based Natural Visual Landscape Evaluation Tool in Large-scale Urban Planning - A Comparative Study in Dongshan New Town
doi	https://doi.org/10.52842/conf.ecaade.2002.478
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 478-487
summary	Natural visual landscape is under deterioration due to improper construction and planning in modern development of China. One of the main reasons is the feebleness in planning supporting methodology and technology in respect for natural visual landscape. In such supporting information, landscape evaluation always acts as a significant component. Especially in comprehensive planning, it is the only approach to access visual value distribution in large-scale region. In this paper, we present a GISbased natural visual landscape evaluation tool through a case study. By an integrated rating statistics function of this tool, visual quality of natural landscape is quantified through analysis in visibility, landuse, and visual resource quality. Then we make comprehensive planning strategies based on this scientific supporting tool. Furthermore, we discuss the potential of this tool by comparing these strategies with schemes of the same project conducted through traditional planning module. This comparative study reveals the efficiency and effectiveness of the tool as well as its implementation in large-scale comprehensive urban planning.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	9f9c
authors	Hu, Xiaochun
year	2002
title	An Information-based Framework for Composites Design
source	Drexel University
summary	The heterogeneity of composites determines that composite materials can be engineered to better satisfy a specific design requirement. The main problems that have hindered the application of composites are the need for the material and manufacturing design to be conducted simultaneously, the involvement of a large number of design factors, the difficulty in the characterization of composites, and the inherent repetition of the design process. Considering these problems, this thesis presents an information-based framework for composites design. This research consists of four main aspects: (1) The development of a heterogeneous CAD modeling algorithm and an integrated CAD/CAE method, and their application in a unit cell-based characterization of composite materials with a complex fiber form; (2)The development of a unit cell database for improving the material and manufacturing process design, which covers the design of its database model and the access strategies based on the logic architecture of unit cells and the relationships among elements of unit cells and with the environments; (3)The design of an Information-Based Design Support System (IBDSS) to support the composites design by using the unit cell database, in which the blackboard framework is adopted for the system to organize various computer techniques for different design stages, and to support the design iterating to satisfactory ones incrementally and efficiently, and the data structure of the blackboard, the algorithm to control design iterations, and design procedures for every stage are studied; and (4) The introduction of a ranking-based unit cell evaluation methodology and effective ranking factors for facilitating and improving the composite design process. The approach improves the efficiency of composites design by automating design iterations, supporting composite characterization, alleviating the cost of composite material and manufacturing method design, and assisting in tailored material selection. Case studies are presented to show how the IBDSS is applied to support composites design.
keywords	Mechanical Engineering
series	thesis:PhD
email
last changed	2003/02/12 22:37

For more results click below: