Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 497

Reformat results as: short short into frame detailed detailed into frame

_id	ba50
authors	Achten, Henri and Jessurun, Joran
year	2002
title	An Agent Framework for Recognition of Graphic Units in Drawings
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 246-253
doi	https://doi.org/10.52842/conf.ecaade.2002.246
summary	Architects use graphic conventions in their drawings that have meaningful content to the design task. In previous work, such well-defined sets of graphic entities have been identified and defined. These sets are called graphic units. In this paper, we discuss how graphic unit recognition in drawings can take place using a multi-agent systems approach. This approach seems promising as singular agents may specialize in graphic unit-recognition, and multi-agent systems can address problems of ambiguity through negotiation mechanisms. We present an agent framework for this purpose, how it connects to the theory of graphic units, and how agents for recognizing graphic units are defined. The paper ends with a discussion of current findings and future work.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

_id	6440
authors	Chang, Y.L., Lee, Y.Z. and Liu, Y.T.
year	2002
title	Construction of Digital City in Physical City: Cyberspatial Cognition Approach to the Project of Hsin-Chu Digital City in Taiwan
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 109-116
doi	https://doi.org/10.52842/conf.caadria.2002.109
summary	The cyberspace upon physical space forms a new spatial structure to increase the influence on the urban fabric and the concept of space in architecture. Today, digital cities are being developed all over the world. By using a city metaphor, digital cities integrate urban information and create public spaces. How do digital cities directly connect to physical cities and become an imaginable city? Therefore, we argue that a new spatial analysis theory must be established for digital city, comparing with theories of disciplines, to find the explicitly spatial structures and relations in digital city upon physical city.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	1a42
authors	Fjeld, M., Lauche, K., Bichsel, M., Voorhorst, F., Krueger, H., Rauterberg, M.
year	2002
title	Physical and Virtual Tools: Activity Theory Applied to the Design of Groupware
source	Computer Supported Cooperative Work (CSCW), Kluwer
summary	Activity theory is based on the concept of tools mediating between subjects and objects. In this theory, an individual's creative interaction with his or her surroundings can result in the production of tools. When an individual's mental processes are exteriorized in the form of tools - termed objectification - they become more accessible to other people and are therefore useful for social interaction. This paper shows how our understanding of activity theory has shaped our design philosophy for groupware and how we have applied it. Our design philosophy and practice is exemplified by a description of the BUILD-IT system. This is an Augmented Reality system we developed to enhance group work; it is a kind of graspable groupware which supports cooperative planning. The system allows a group of people, co-located around a table, to interact, by means of physical bricks, with models in a virtual three-dimensional (3D) setting. Guided by task analysis, a set of specific tools for different 3D planning and configuration tasks was implemented as part of this system. We investigate both physical and virtual tools. These tools allow users to adjust model height, viewpoint, and scale of the virtual setting. Finally, our design practice is summarized in a set of design guidelines. Based on these guidelines, we reflect on our own design practice and the usefulness of activity theory for design.
series	other
last changed	2003/04/23 15:50

_id	ddssar0210
id	ddssar0210
authors	Friedl, G., Trum, H.M.G.J. and Rutten, P.G.S.
year	2002
title	An Innovative Model of the Building Development ProcessDesign as a Process of Crystallisation
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In the past, models describing the development of artefacts, including buildings, usually were of a linear nature thereby suggesting a sequential path from conception of the artefact to its completion. This has consequences for the sequence of activities in the design and programming phase. However, designing is basically a thinking activity and is as such not bound to the same laws as e.g. the construction process. This must have repercussions for the way the design process is designed andmanaged. The proposed conceptual model of the artefact development process – in this case a building design process – is a kind of framework which is more in accordance with the nature of thinkingactivities. It should stimulate a non-sequential process. The development of a solution to a design problem thus should become a responsive search process driven by insights and creative leaps but guided by the framework the model provides. Furthermore, the model is meant to support the exploration and clarification of the problem as well as to extend the solution space by various means such as the development of scenarios and strategic values as a basis for the realisation of the building project’s goals. This model is an essential element in the development of an innovative approach towards the process design of the building design process. The creation of a building (conception, design and development) is not considered a sequential process but a process of crystallisation with the potential of developing in all directions, thus growing from a conceptual centre outwards.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	ddssar0218
id	ddssar0218
authors	Koutamanis, Alexander
year	2002
title	Information Amount Measurement in Generative Systems:An Objective Approach to Termination
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Termination in computational generative systems is linked increasingly to user intervention: the generative system concludes when the user chooses it to do so. The similarities between this approach to termination and the creative artistic process suggest that the products of generative systems are amenable to analysis in terms of well-formedness leading to a formal measure that acts as an automatic termination trigger. The paper proposes that such a measure can be derived from structural information theory. By applying the compression of structural information theory to meaningful principles of a design world we derive a consistent, universal description of the design result at any given state. This description expresses the correlation of the design with its formal constraints, as well as the general perception of the design’s patterns.
series	DDSS
last changed	2003/08/07 16:36

_id	c7e0
id	c7e0
authors	Maria Gabriela Caffarena Celani
year	2002
title	BEYOND ANALYSIS AND REPRESENTATION IN CAD: A NEW COMPUTATIONAL APPROACH TO DESIGN EDUCATION
source	Submitted to the Department of Architecture in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the field of Architecture: Design & Computation at the Massachusetts Institute of Technology
summary	This thesis aims at changing students' attitude towards the use of computer-aided design (CAD) in architecture. It starts from the premise that CAD is used mostly for analysis and representation, and not as a real design aide, and that architecture students have a bias against learning computer programming. For this purpose, a prototypical instruction system that mixes computer-aided design and computational design theory was developed, based on a series of fundamental concepts that are common to both fields. This system was influenced by Mitchell's (1987) The Art of Computer Graphics Programming and Stiny's (1976) shape grammars. Despite being based on solid theoretical foundations, CAD has progressively become an exclusively practical tool, since its origins in the 50's and 60's, while computational design theories have been mostly restricted to the academic circles. This thesis proposes an inversion in the present situation: the study of CAD theory, and the application of computational design into practice. The system proposed provides a conceptual framework that can be adapted to different circumstances, including course formats and resources, as well as students' background and technical training. It is based on seven fundamental concepts from computational design theories that are also important to the study of shape grammars: symmetry, recursion, rule-based compositions, parameterization of shapes, generative systems, algorithmization of design procedures, and shape emergence. These concepts are introduced within a CAD context, where their practical implementation and experimentation are possible, focusing the understanding of the computational nature of design. During this research, the proposed system was tested in two case studies with students from schools that had contrary orientations in terms of the importance of CAD in the architectural curriculum. In these experimental courses, students' activities evolved from using a commercial CAD tool in an innovative way, to the use of programming techniques for creating meaningful tools. Despite not having a statistical reach, the fieldwork allowed drawing preliminary conclusions about the proposed system's efficacy, since virtually all the students reported changing their understanding of the role of CAD in architecture, while some also acknowledged a conceptual influence in other subjects and in the way they see architecture.
keywords	Symmetry
series	thesis:PhD
type	normal paper
email
more	http://www.fec.unicamp.br/~celani/
last changed	2004/11/17 20:51

_id	461b
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2002
title	The Role of Advanced VR Interfaces in Knowledge Management and Their Relevance to CAD
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 277-284
doi	https://doi.org/10.52842/conf.caadria.2002.277
summary	This paper introduces knowledge management and computer aided visualisation as a key in establishing both valuation and value creation capabilities in the enterprise where dissemination of knowledge and effective sharing of information through collaboration spur creativity and stimulate business practices. The paper draws an original approach for the design and development of a universal information/knowledge visualisation tool and outlines the mechanics that enable the working prototype that focuses on CAD.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	9c41
authors	Ahmad Rafi, M.E., Chee W.K., Mai, N., Ken, T.-K. N. and Sharifah Nur, A.S.A. (Eds.)
year	2002
title	CAADRIA 2002 [Conference Proceedings]
source	Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X / Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
doi	https://doi.org/10.52842/conf.caadria.2002.
summary	Evolution of trends in the realm of computer aided architectural design (CAAD) has seen the convergence of technologies – complementing traditional tools with emerging sciences like Information Technology (IT) and multimedia applications. This appliqué of technologies has not just expanded the scope and enhanced the realm of CAAD research and practice, but is also breaking new frontiers. This creative nexus will be realised at the 7th International Conference on Computer Aided Architectural Design Research In Asia (CAADRIA 2002) to be held at the Faculty of Creative Multimedia, Multimedia University, Malaysia, between 18th-20th April, 2002. CAADRIA 2002’s theme, "Redefining Content", seeks to recognise and infuse these emerging components in the field of architecture and design with a holistic approach towards online, digital and interactive systems. The 41 papers compiled were selected through a blind review process conducted by an international review panel. To reflect the multi-disciplinary nature of this year's conference, the chapters are arranged topically to facilitate the in-depth study of key components. The component sessions include: // Web Design, Database and Networks // CAD, Modelling and Tools // Collaborative Design, Creative Design and Case Reasoning // Simulation and Prototyping // Virtual Environment and Knowledge Management // Design Education, Teaching and Learning /// We believe that this specialised approach will provide a deeper and more illuminating feel of the various components and their critical convergence in the field of architecture and design.
series	CAADRIA
email
more	www.caadria.org
last changed	2022/06/07 07:54

_id	ddssar0214
id	ddssar0214
authors	Al Hassan, F., Trum, H.M.G.J. and Rutten, P.G.S.
year	2002
title	Strategic Briefing A Conceptual Process Model for Building Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Nowadays building design problems are divided in partial discipline related sub-problems. Through targeted and focused attention to sub problems however the awareness of the whole is lost. Each designparticipant gives his sub-problem first priority. In contrast in the past the master builder saw the whole problem as his problem first. Thus the process of seeing the design problem as a whole, as a result ofprioritizing, considering constraints, or strategizing, is lost in today’s practice, basically because this process is a mental and implicit process, that occurred in the brain of the multi-disciplinary master builder.In most cases it is the task of no one in a design team today. The aim of this paper is modeling this conceptual mental implicit process design using System Theory and Cognitive Psychology, trying to determine the structure of the design problem as it occurs intuitively in the brain. The result will provide us with a mechanism that enables us each time to refine a unique common design problem representation. This leads to more effective use of design team capabilities, and forms an essential basis for organizing efforts toward collaborative solutions. Also some kind of clarity is provided as to how proposed solutions are to be judged.
series	DDSS
last changed	2003/11/21 15:15

_id	sigradi2023_428
id	sigradi2023_428
authors	Armagno, Ángel
year	2023
title	The spatial discourse of Power Architectures in Kurt Wimmer's film "Equilibrium".
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1421–1432
summary	This article explores the correlation between the language of cinema and the architectural spatial discourse of power depicted in the film Equilibrium (Wimmer, 2002). This connection is examined through a discursive approach to communication studies. To analyze a specific sequence from the chosen film, a two-stage multimodal analysis was conducted. Initially, the visual analysis method proposed by Kress and Van Leeuwen (2006) designed for the representation of social actors, was employed. Subsequently, in the second stage, sociological and conceptual associations were drawn from the diverse semiotic resources identified in the first phase. The analyzed case revealed several intertextual relationships, among them; Hitler's figure recontextualized as an exemplifying archetype; the panopticon concept representing the spatial power dynamics; the presence of the German zeppelin symbolizing dominance and spreading propaganda through loudspeakers; the religious iconographic influence, its forms and symbols, contributing to a cultural identity inseparable from the history of the Western world.
keywords	Cinema, Power Architectures, Critical discourse analysis, Multimodality, Intertextuality
series	SIGraDi
email
last changed	2024/03/08 14:08

_id	263a
authors	Bermúdez, Julio
year	2002
title	Implicaciones Arquitectónicas de La Naturaleza del Hacer en Ambientes Digitales [Architectonic Implications of the Nature of the Digital Atmosphere ]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 142-145
summary	Architectural Implications of the Nature of Making in Digital Environments There exists an a-priori relationship between the basic structural constrains of an environment and the types of construction that may evolve there. For instance, the inexorable laws of nature have caused architecture to develop as a physical, stable, containing and inert object. Hence there are good reasons to study how cyberspace with its different ontological foundations may define the architecture to be built there. This examination may be best accomplished by concentrating in how what is structurally unique to the cyber impacts architectural design This paper investigates the ontology of construction in cyberspace by analyzing ordinary digital laws that defy reality. The findings both challenge our traditional conceptions of architecture and guide us toward totally unprecedented design potentials. The goal is to begin building a fundamental theory of architectural space, design and construction applicable to cyberspace.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	59ca
authors	Bhavnani, S.K. and Bates, M.J.
year	2002
title	Separating the Knowledge Layers: Cognitive Analysis of Search Knowledge Through Hierarchical Goal Decompositions
source	Proceedings of the ASIST'2002 (2002), 204-213
summary	Hierarchical goal decompositions have proved to be a useful method to make explicit the knowledge required by users to perform tasks in a wide range of applications such as computeraided drafting (CAD) systems. This analysis method progressively decomposes a given task starting from the task layer on the top of the decomposition, to the keystroke layer at the bottom. The analysis enables a close inspection of the knowledge required to perform the task at each layer of the decomposition. In this paper we show how the method of hierarchical goal decomposition can be used to understand more precisely the knowledge that is required to perform information search tasks. The analysis pinpoints: (1) the critical strategies in the intermediate layers of knowledge that are known by experts searchers; (2) why such knowledge is difficult to acquire by novice searchers; (3) how the analysis provides testable predictions of behavior based on the acquisition of different types of knowledge. We conclude by discussing the advantages provided by hierarchical goal decompositions, and how such an approach can lead to the design of systems and training.
series	other
email
last changed	2003/11/21 15:16

_id	817b
authors	Bong, C.W. and Wang, Y.C.
year	2002
title	A Shape Compactness Measurement Indexing with Fuzzy Multicriteria Decision Making Approach
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 093-100
doi	https://doi.org/10.52842/conf.caadria.2002.093
summary	Compactness of a district or zone is determined by considering its appearance and the area of dispersal of the district (Altman, 1998) and it is used as a characteristic to describe shape (Shiode, 1998; Knight, 1997). However, existing compactness measurement used to assess district plans in redistricting applications are vague and imprecision although there are more than thirty over Euclidean or non-Euclidean measurement methods. Therefore, this paper presents an integrated shape compactness measurement indexing with a fuzzy multicriteria decision making approach (FMCDM) to enhance the measurement of shape compactness. An experiment is conducted in order to verify the practically of the proposed model to improve existing compactness measurement method.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
doi	https://doi.org/10.52842/conf.acadia.2007.174
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ee65
authors	Bourdakis, Vassilis and Charitos, Dimitris
year	2002
title	Teaching Virtual Environment Design
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 42-49
doi	https://doi.org/10.52842/conf.ecaade.2002.042
summary	In a previous paper, the authors considered the design and development of virtual environments (VEs) pointing out the need for a new direction within architectural education, leading towards a generation of VE architects. It was suggested that there is an urgent need for educating practitioners who will contribute to the design of 3D content for multimedia and virtual reality applications. This paper focuses on the application of these principles and ideas into the structure and methodology of three VE design courses, taught by the authors. These courses are by no means suggested as exhaustive examples of teaching this subject. They are seen as preliminary approaches, adapting to the educational context they are integrated within. Bearing in mind the problems relating to teaching large numbers of students with a design studio approach, difficult concepts, resources availability, fighting misconceptions, techno-phobia the following areas are discussed in the hope that they will contribute to VE design curricula in the near future.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	3d67
authors	Breen, J., Nottrot, R. and Stellingwerff, M.
year	2002
title	Relating to the ‘real’ Perceptions of Computer Aided and Physical Modelling
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 134-138
doi	https://doi.org/10.52842/conf.ecaade.2002.134
summary	Designing - giving form to new objects or environments - is largely a question of anticipating the workings of spatial and material environments, which can become ‘reality’ only by being built. Until ‘realized’ a design is essentially a figment of the designer’s imagination, although his or her ideas may be laid down and conveyed to others via specialized design media. In this way impressions of the design may be shared with clients, colleagues or other ‘actors’ in the design process. Such products of the designer’s imaging process can be relatively abstract or begin to approach - future - reality. Form & Media research can be ‘revealing’, stimulating insights concerning preferences, working processes and the effects of products of the designer’s imagination. In the past ten years we have gained considerable practical experience with both virtual and tangible (scale) models. We have compared different techniques in conference workshops, within educational settings and in our Form & Media research laboratory. The research projects ranged from the development of practical techniques and working methods to protocol analyses of designing architects. This contribution draws comparisons between different computer aided modelling techniques, with an indication of their perspectives, making use of the experience gained from various experiments in an educational context, and will highlight the potentials for different combinations of digital and physical modelling techniques.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	138eaea2001
id	138eaea2001
authors	Breen, Jack
year	2002
title	A Room with a Different View
source	Environmental Simulation - New Impulses in Planning Processes [Proceedings of the 5th European Architectural Endoscopy Association Conference / ISBN 3-922602-85-1]
summary	This contribution documents the developments, results and findings of an experimental design visualisation and presentation exercise entitled ‘A Different View of Delft’. The primary aim of this project was to make students aware of the potentials of the active utilisation of physical models for the sake of designerly enquiry. Furthermore the ambition was to explore new ways of using such model ‘environments’ for the benefit of design communication and presentation. For this exercise a ‘game’ situation with clear constraints and rules was developed beforehand. The students were to work out a proposal for a new exhibition space, as an annex to a – hypothetical – existing museum. The new space was to create a fitting ‘setting’ for a single work of art: Johannes Vermeer’s famous View of Delft. The maximum contours of the new exhibition space were given, along with clear guidelines concerning which walls and roof segments might be (partly) opened. The emphasis lay on the viewer’s ‘approach’ to the painting, its positioning and ‘framing’ in an architectural context. A designerly search involving form and space, the choice of colours and materials and particularly the strategic use of (natural) lighting.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

For more results click below: