Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 514

Reformat results as: short short into frame detailed detailed into frame

_id	6b70
authors	Af Klercker, Jonas and Pittioni, Gernot
year	2002
title	Architect and Structural Engineer in interactive design
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 386-389
doi	https://doi.org/10.52842/conf.ecaade.2002.386
summary	We are convinced that an interactive design process involving engineers and architects will create values to a project. Looking back there have been some obstacles, like a week’s time for exchange of drawings with traditional postal services; manual calculation methods, which could not be spoiled on loose grounds like architect’s sketches; different media – architect’s drawings and engineer’s numbers in tables; attitudes and traditional roles, implemented already in education. Today most of these obstacles can be overcome and we have made a test. We have used ArchiCad by Graphisoft and FEM-design by SKANSKA IT Solutions to test to make an interactive design. Our conclusions are that exchange of information, drawings and other documents is more or less routine in praxis, and it works almost instantly. Computers make calculation faster and easier for the engineer. Though we would wish to have software which manages to do more rapid estimations. Even simulations such as of loads on a structure are practically possible. By using model based CAD the data can be used for transferring quantities for calculations as well as visualization of the design as a platform for collaborate analysis. The technique is developed and usable but to gain acceptance and make use of it is also a matter of attitudes and of application activities in education.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	8869
authors	Ataman, Osman
year	2002
title	Historical Analysis of Building - (Re)Construction in Olivette Park, USA
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 63-66
summary	From 1959 to 1990, East St. Louis, Illinois deteriorated from an “All-American City” to a national symbol of urban blight. Located on the Mississippi River, the East St. Louis of today faces severe economic, social, and environmental problems. Nearly onequarter of the city’s work force is unemployed and about 40 percent of families are living below the poverty level. But East St. Louis was not always a distressed community. With strong ties to St. Louis and the surrounding region, East St. Louis onceflourished as the country’s second busiest railroad hub. Powerful economic and socio-political forces, as well as unfortunate historical circumstance, propelled the city into a downward spiral that drastically decreased the quality of life in East St. Louis. This paper presents the digital re-construction of the buildings and the analyses of the historical aspects of the housing construction and types in this area. Furthermore, it reports the survey and assessment of the quality of building stocks based on therevitalization plan that will provide some guidelines and suggestions for improvement, stability, and future needs.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	59ca
authors	Bhavnani, S.K. and Bates, M.J.
year	2002
title	Separating the Knowledge Layers: Cognitive Analysis of Search Knowledge Through Hierarchical Goal Decompositions
source	Proceedings of the ASIST'2002 (2002), 204-213
summary	Hierarchical goal decompositions have proved to be a useful method to make explicit the knowledge required by users to perform tasks in a wide range of applications such as computeraided drafting (CAD) systems. This analysis method progressively decomposes a given task starting from the task layer on the top of the decomposition, to the keystroke layer at the bottom. The analysis enables a close inspection of the knowledge required to perform the task at each layer of the decomposition. In this paper we show how the method of hierarchical goal decomposition can be used to understand more precisely the knowledge that is required to perform information search tasks. The analysis pinpoints: (1) the critical strategies in the intermediate layers of knowledge that are known by experts searchers; (2) why such knowledge is difficult to acquire by novice searchers; (3) how the analysis provides testable predictions of behavior based on the acquisition of different types of knowledge. We conclude by discussing the advantages provided by hierarchical goal decompositions, and how such an approach can lead to the design of systems and training.
series	other
email
last changed	2003/11/21 15:16

_id	b13d
authors	Broek, J.J., Horváth, I., Smit, B. de, Lennings, A.F., Rusák, Z. and Vergeest, J.S.M.
year	2002
title	Free-form thick layer object manufacturing technology for large-sized physical models
source	Automation in Construction 11 (3) (2002) pp. 335-347
summary	Large-sized free-form objects of different materials are widely used in various industrial applications. Currently, layered rapid prototyping technologies are not suitable for the fabrication of this kind of objects, due to the necessity of a large number of layers and the limitations in size. This paper reports a novel approach of layered manufacturing that is more appropriate for the fabrication of these large objects. A method of thick-layered object manufacturing is presented, which is based on a higher order approximation of the shape and application of a flexible curved cutting tool.The method allows the production of physical prototypes, which need little or no finishing. In order to meet the designer's intend, as closely as possible, some feasible system characteristics are introduced. The process is ordered in a sequential way and provides a highly automated process. A hierarchical decomposition of the CAD geometry takes place into components, segments, layers and sectors, based on morphological analysis. This method enables the manufacturing and the re-assembly of the parts to produce the physical prototypes without affecting the requested functionality. Due to the possibility of obtaining multiple solutions in the physical model, much attention must be paid to the efficiency of the process.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	82ac
authors	Caldas, Luisa Gama and Norford, Leslie K.
year	2002
title	A design optimization tool based on a genetic algorithm
source	Automation in Construction 11 (2) (2002) pp. 173-184
summary	Much interest has been recently devoted to generative processes in design. Advances in computational tools for design applications, coupled with techniques from the field of artificial intelligence, have lead to new possibilities in the way computers can inform and actively interact with the design process.In this paper, we use the concepts of generative and goal-oriented design to propose a computer tool that can help the designer to generate and evaluate certain aspects of a solution towards an optimized behavior of the final configuration. This work focuses mostly on those aspects related to the environmental performance of buildings.Genetic Algorithms (GAs) are applied as a generative and search procedure to look for optimized design solutions in terms of thermal and lighting performance in a building. The GA is first used to generate possible design solutions, which are then evaluated in terms of lighting and thermal behavior using a detailed thermal analysis program (DOE2.1E). The results from the simulations are subsequently used to further guide the GA search towards finding low-energy solutions to the problem under study. Solutions can be visualized using an AutoLisp routine.The specific problem addressed in this study is the placing and sizing of windows in an office building. The same method is applicable to a wide range of design problems like the choice of construction materials, design of shading elements, or sizing of lighting and mechanical systems for buildings.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	sigradi2003_092
id	sigradi2003_092
authors	Castañé, D., Tessier, C. and Deho, C.
year	2003
title	Prácticas educativas: su impacto y riesgo en las tecnologías digitales (Educational Practices: Their impact and risk in digital technologies)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Based on the latest didactic teaching theories, this project presents a critical analysis of dynamic educational practices, which have been actively utilized through the last decade by the department of research and instruction in the School of Architecture at the University of Buenos Aires. This work proposes a journey through the landmarks that recognize the impact of technology on teaching best practices, mainly contained in a technical course. It presents the didactic theories of Bruner (90), Perkins, Gardner (93), Burbules (2001), E. Litwin (2002) and others. Crucial representative work developed by students has been taken to introduce criteria and construct practical reflections to arrive at an enriching proposition.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ga0228
id	ga0228
authors	Celani, Maria Gabriela Caffarena
year	2002
title	CAD – The Creative Side An educational experiment that aims at changing students’ attitude
source	International Conference on Generative Art
summary	The present paper describes an innovative design education system tried out at two different architecture schools in Brazil, with opposite approaches to the use of CAD. The experimental courses had two main goals: (1) to explore the use of logical operations in design, such as symmetry, recursion, parameterization, and combinatorial analysis, and (2) to apply these techniques with the use of the computers, using CAD not only as a representational tool, but rather as an explorative, customizable and programmable design aide for the creative process. The experiments resulted in a number of interesting compositions, design projects and programs, and assessment questionnaires revealed a real change in students’ attitude towards the use of CAD in architecture. The experiments related were the field research part of a Ph.D. thesis defended at MIT in July 2002. The present work had the support of CNPq, a Brazilian entity devoted to the scientific and technological development.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	6440
authors	Chang, Y.L., Lee, Y.Z. and Liu, Y.T.
year	2002
title	Construction of Digital City in Physical City: Cyberspatial Cognition Approach to the Project of Hsin-Chu Digital City in Taiwan
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 109-116
doi	https://doi.org/10.52842/conf.caadria.2002.109
summary	The cyberspace upon physical space forms a new spatial structure to increase the influence on the urban fabric and the concept of space in architecture. Today, digital cities are being developed all over the world. By using a city metaphor, digital cities integrate urban information and create public spaces. How do digital cities directly connect to physical cities and become an imaginable city? Therefore, we argue that a new spatial analysis theory must be established for digital city, comparing with theories of disciplines, to find the explicitly spatial structures and relations in digital city upon physical city.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	9fde
authors	Chen, S.C.
year	2002
title	Aided Design Strategy Under the Professional Knowledge-Orientation
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 293-300
doi	https://doi.org/10.52842/conf.caadria.2002.293
summary	Professional knowledge is a key component of the decision making process, as well as a major part of the thinking process. This research uses a strategy oriented by professional knowledge to assist the analysis of strategies in the design process, and to incite different design thinking under the operation models of media; through the basis of the design process, analyse the utilization of professional knowledge by designers in the design process and the different knowledge understanding methods under different media utilizations.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	f4e4
authors	Chiarelli, Julia
year	2002
title	Una Posible visión Griega del Realismo geométrico en las Imágenes Arquitectónicas [A Possible Greek Vision of Geometric Realism in Architectural Images ]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 268-271
summary	The vision of a reality that is individual and personal. Along the history we see as the different towns they build their cities and their temples with different morphologies and in a different establishment way; but the question is: As they decided their construction? Starting from that law?The Greeks already discovered certain mechanisms of the vision in the century IV B.C This posture on the visual sense made that optic illusions have been analyzed for then to be used with premeditation in theconstruction of certain temples and its location. The departure hypothesis is centered in 2 (two)-investigation levels: 1. The definition of Illusion of Hering (optic illusions) and their with the realism in architectural image2. The analysis of the electronic scale models based on the geometry proyectual.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	3183
authors	Da Veiga, Jose and La Roche, Pablo
year	2002
title	A Computer Solar Analysis Tool for the Design and Manufacturing of Complex Architectural Envelopes: EvSurf
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 105-109
summary	Heat flows (gains or losses) in a building are affected by solar radiation, internal gains and temperature differences. A prototype of a tool that evaluates solar radiation on building envelopes has been developed as an applet to run on the Internet. This tool analyses the relationship of the solar position with the surfaces of complex envelopes by evaluating the potential amount of direct solar radiation that each surface section receives as a function of the angle of each surface with the sun for specific days and latitudes. A fitness function rates the overall performance of the proposed building envelope at specific hours or whole days, permitting to compare alternatives. Because of its characteristics, this tool is a Very Simple Design tool that works interactively with the user during the design process helping to design solar responsive building envelopes.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	012c
authors	De Araujo, Tereza Cristina Malveira and Rossi, Angela Maria Gabriella
year	2002
title	O real, o virtual e a Internet na era da Informação [The Real, the virtual and the Internet in the Information Age]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 28-30
summary	Over the last decade, advances in computer graphics plus the growing popularity of the Internet have incorporated the words reality and virtuality into our vocabulary, at the same time, making the distance between the words shorter. In this article, we discuss the two concepts - reality and virtuality - and analyze how this question has affected human communication, specially in the Web environment. This analysis will be used as a basis for research on the impact of “non-presence” in working relationships in a virtual environment, more specifically in the architecture and engineering areas where we find the Web being used as a communication tool for the development of collaborative design between groups involved with the design process of the built environment.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ddssup0205
id	ddssup0205
authors	Deguchi, A., Tabira, Y., Matsuura, H., Nakano, H. and Arima, T.
year	2002
title	Integration System of Archaeological and Geographical Informationfor Planning in Historical Regions
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	This study aims to construct the GIS for supporting the planning process and archaeological analysis in the historical regions by integrating geographical data and archaeological data on the sites with ruinsand remains in various period from ancient through medieval which had been buried and was recently excavated in geologic layers and mounds. First, for understanding the trends of environmental condition the excavated sites, we analyze the relationship between the site location and the condition ofgeography and natural environment by using the constructed system.Secondary, we develop the system to make it possible to browse and operate the information on the GIS through the internet. This web GIS constructed by us supports sharing the information on planning for preservation of historical sites among city planners, archaeologists and citizens, and serve as a tool for the collaboration and the coordination of urban development and historical preservation. Finally, as the application with the GIS, we show the results of case studies and point out the merits and effects about usage of the GIS for archaeological analysis as well as learning the local history.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup0206
id	ddssup0206
authors	Dickey, J.W. and Jones, Dennis B.
year	2002
title	CyberQuest Prospector (CQP):A Guide for the Evolutionary Discovery Process
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	CyberQuest Prospector (CQP) is a tool to guide an individual or team through the evolutionary process of finding better approaches to a particular problem, project, program, plan, or design. This prospectingprocess can involve, for example, new definitions, different data, altered evaluation techniques and new ideas and actions on many other topics. CQP involves a five step process. At step zero all the requisite historical background knowledge is entered. This knowledge is divided into topical areas or statements. In step one the team updates the various knowledge statements in the system and then assigns a "maturity" to them. The team then adds any new statements (step two). Next, (step three) the team makes decisions on actions to be undertaken and also on the external factors likely to be "in play" in the upcoming time period. After that period (step four) the team records the results and rates the "success" achieved. CQP subsequently changes the associated knowledge statement confidences. In the last step the clock is advanced. The ultimate result is a set of definitions, data, relationships, experimental techniques, issues,implications, and even personality traits in which some degree of confidence has evolved. The CQP process is demonstrated here with an urban transportation planning example involving such diverse topics asplanning/analysis techniques, data collection methods, and procedures for working with advocacy coalition networks.
series	DDSS
last changed	2003/08/07 16:36

_id	2a84
authors	Donath, D. Hansen, St. and Richter, K.
year	2002
title	Architectural Window - Computer networks as planning and integration tools
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 302-305
doi	https://doi.org/10.52842/conf.ecaade.2002.302
summary	As building projects become increasingly more complex, the number of project participants increases as does their spatial distribution. An effective decentralised work process and co-operation is of increasing importance. The global computer network, the internet, has great potential and recent times have seen the development of a variety of techniques in this field. The project proposal described here is based upon this approach and also takes it a step further. A specific analysis of the subject and the subsequent identification of potential approaches formed the basis for an architectural application that brings the architect in contact with other project participants using the internet as a powerful yet simple and easy to use medium. The project is currently (2002) undergoing practice tests and academic investigation and is installed on a freely-accessible server.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ga0207
id	ga0207
authors	Fischer, T.
year	2002
title	Computation-Universal Voxel Automata as Material for Generative Design Education
source	International Conference on Generative Art
summary	This paper is a report on the educational application of a voxel automata system for massively parallel execution of computation-universal cellular units in the generative design field. The software, designed and co-developed by the author to enable developmental strategies in generative design - for example with respect to 3D design generation, semantic self-evaluation and self-replication - was applied in teaching at the School of Design at The Hong Kong Polytechnic University to achieve two goals: to teach programming as part of the School’s Interactive Systems Design stream and to teach generative concepts at a theoretical, yet hands-on and highly intensive level. An introduction to the software, its development and its functions as well as a discussion of the teaching/learning experience is given, highlighting design educational aspects and student design work. The paper concludes with an analysis of how student approaches to generative concepts have been affected by the tool and how ideas and feedback from students have supported the ongoing development of the voxel automata system and its documentation.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	1a42
authors	Fjeld, M., Lauche, K., Bichsel, M., Voorhorst, F., Krueger, H., Rauterberg, M.
year	2002
title	Physical and Virtual Tools: Activity Theory Applied to the Design of Groupware
source	Computer Supported Cooperative Work (CSCW), Kluwer
summary	Activity theory is based on the concept of tools mediating between subjects and objects. In this theory, an individual's creative interaction with his or her surroundings can result in the production of tools. When an individual's mental processes are exteriorized in the form of tools - termed objectification - they become more accessible to other people and are therefore useful for social interaction. This paper shows how our understanding of activity theory has shaped our design philosophy for groupware and how we have applied it. Our design philosophy and practice is exemplified by a description of the BUILD-IT system. This is an Augmented Reality system we developed to enhance group work; it is a kind of graspable groupware which supports cooperative planning. The system allows a group of people, co-located around a table, to interact, by means of physical bricks, with models in a virtual three-dimensional (3D) setting. Guided by task analysis, a set of specific tools for different 3D planning and configuration tasks was implemented as part of this system. We investigate both physical and virtual tools. These tools allow users to adjust model height, viewpoint, and scale of the virtual setting. Finally, our design practice is summarized in a set of design guidelines. Based on these guidelines, we reflect on our own design practice and the usefulness of activity theory for design.
series	other
last changed	2003/04/23 15:50

For more results click below: