Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 508

Reformat results as: short short into frame detailed detailed into frame

_id	4a58
id	4a58
authors	Giddings R, Horne M
year	2002
title	Artists' Impressions in Architectural Design
source	Spon Press, London, ISBN 0-419-26200 (hbk) ISBN 0-419-23600-7 (pbk)
summary	This book analyses the ways in which architects have presented their designs for clients and the public, both historically and contemporarily. It spans a period from the 15th to the 21st century and places the technological developments of today in context with the rich heritage of the past.
keywords	Architectural Design, Representation, Historical Perspective
series	book
type	normal paper
email
last changed	2006/06/08 22:22

_id	7798
authors	Barrow, Larry
year	2002
title	Elitism, IT and the Modern Architect Opportunity or Dilemma
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 97-109
doi	https://doi.org/10.52842/conf.acadia.2002.097
summary	Information Technology (IT) is impacting architecture dramatically in process and form. Often thecurrent transformation of architecture is difficult to analyze and frequently we see confusion and anxietyregarding uncertainties for the future of the architect as designer and project leader. The currentpotentiality for new exotic form (i.e. product) is mesmerizing; however, in the current context, lessobvious issues and pertinent questions are emerging for the profession. What is the mission of theprofession? What will keep us relevant in the mist of the new global society?In this paper, we will take an evolutionary perspective of technology in architecture and draw parallelsbetween the Renaissance, which is the genesis of the modern architect, and the contemporary state ofarchitecture. The modern architect was birthed during the Renaissance where we see the retraction ofthe architect from the building site and separation from direct involvement in the building process.Communications technology (i.e. representation in the form of free-hand drawings, mechanical 2Dorthographic drawings and 3D perspectives) enabled the decomposition of the master builder into threecomponents (i.e. artist-designer, practicing_architect, and builder). Thus, we see technology enable thedenigration and ultimate dissolution of the centuries old craftsman guilds and the master builder. Thetechnology evolution of “drawings” enabled monumental change in the process of architecture over thepast five hundred years. The fission of the master builder, enabled by “drawings”, resulted in disparatefactions which are the forerunners of the modern day litigious design-bid-build project delivery. We nowincreasingly see a return to the fusion of design and building where often the architect is not the projectmanager or leader. Thus, the question looms, will the 21st century architect lead or be led, and whatare the ramifications for the profession?The historical Master Builder is re-emerging as a dynamically networked team of design andconstruction knowledge specialists. Bi-lateral knowledge exchange, enhanced with emerging IT, isoccurring between owners, managers, architects, design specialists, engineers, builders and machines.Technology is disrupting architecture, resulting in increasing specialization and compressed timeframes, and may require reevaluation of the role of the architect as project-leader "integrativegeneralist"or "design-specialist".Conclusively, the concept of ‘cybernetic architecture’ is proposed as an IT reference framework. Failureto appropriately respond to societal evolution, driven by technology, could result in the loss ofprofessional status for the modern architect. Herein lies our dilemma, or opportunity, depending on therole choice of the modern architect.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2010_73
id	sigradi2010_73
authors	Hunold, Lara Arthur; Gorge Canella Eduardo; Giacaglia Marcelo Eduardo; Corrêa Norberto; Moura da Silva
year	2010
title	Brinquedos, modelos: uma atividade lúdica se transforma em curricular com apoio das novas tecnologias de fabricação digital [Toys, models: a fun activity becomes curriculum, supported by new digital fabrication technologies]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 73-76
summary	This research seeks to assess the use of digital fabrication of toys reusing wood from earlier models produced in undergraduate courses in architecture and design. Froebel (2002) discusses the pedagogical application of blocks of wood that he created, inspired by the information that the architect Frank Lloyd Wright was influenced in his childhood by playing with toy blocks. Among other authors, we found a catalog from the Aladdin factory that is owned by Uruguayan modern artist Torres Garcia. The research aimed to recreate similar educational toys within a context of global crisis and interest in sustainability.
keywords	design education; design methodology; digital fabrication
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	3d67
authors	Breen, J., Nottrot, R. and Stellingwerff, M.
year	2002
title	Relating to the ‘real’ Perceptions of Computer Aided and Physical Modelling
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 134-138
doi	https://doi.org/10.52842/conf.ecaade.2002.134
summary	Designing - giving form to new objects or environments - is largely a question of anticipating the workings of spatial and material environments, which can become ‘reality’ only by being built. Until ‘realized’ a design is essentially a figment of the designer’s imagination, although his or her ideas may be laid down and conveyed to others via specialized design media. In this way impressions of the design may be shared with clients, colleagues or other ‘actors’ in the design process. Such products of the designer’s imaging process can be relatively abstract or begin to approach - future - reality. Form & Media research can be ‘revealing’, stimulating insights concerning preferences, working processes and the effects of products of the designer’s imagination. In the past ten years we have gained considerable practical experience with both virtual and tangible (scale) models. We have compared different techniques in conference workshops, within educational settings and in our Form & Media research laboratory. The research projects ranged from the development of practical techniques and working methods to protocol analyses of designing architects. This contribution draws comparisons between different computer aided modelling techniques, with an indication of their perspectives, making use of the experience gained from various experiments in an educational context, and will highlight the potentials for different combinations of digital and physical modelling techniques.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	8780
authors	Abdelhameed, W., Ozel, F., Addelatiff, M. and Daef, A.
year	2002
title	Assessment of the Impact of Digital-Manual Media Types on the Basic Design Capabilities of Architects: A Proposed Framework and Directive Measures
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 275-276
summary	The research attempts to defi ne and classify the design capabilities of architects into a basic framework. This defi nition will be useful in understanding and determining the types and nature of impact introduced by digital and manual media used during architecturaldesign process. The research consists of three parts. The First part reviews the main stages, tasks and activities of the architectural design process. The second part builds the proposed framework of design capabilities relating them to the specifi c tasks and activities conductedby the architect along the design process. The third part proposes some useful measures as to how to make use of the proposed framework in assessing the impact of media on the design capabilities of architects.
series	SIGRADI
last changed	2016/03/10 09:47

_id	ddssar0201
id	ddssar0201
authors	Achten, H.H.
year	2002
title	Requirements for Collaborative Design in Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The concept of collaborative design has recently come under renewed attention in the field of computer aided architectural design support. Although collaborative design deals with the same aspects of cooperation by various participants in the design process as previously studiedin, for example, concurrent engineering and multi-disciplinary design, it nevertheless puts a different research emphasis. Collaborative design looks at how the process can be improved in such a way that collaboration –working together in a manner to enhance each participants contribution to the design– emerges from the process. In engineering design practice, thismeans a shift forward in the design process where engineers are asked earlier for their input in the design solution. For CAAD research, the phenomenon of collaborative design poses the question how design tools and environments can be made in such a way that collaboration will occur. In this paper, the aims is to describe the concept of collaborative design in architecture, and to give an outline of the perceived requirements in the organisation of design and Computer Aided Design Support to achieve collaborative design.
series	DDSS
last changed	2003/11/21 15:15

_id	461b
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2002
title	The Role of Advanced VR Interfaces in Knowledge Management and Their Relevance to CAD
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 277-284
doi	https://doi.org/10.52842/conf.caadria.2002.277
summary	This paper introduces knowledge management and computer aided visualisation as a key in establishing both valuation and value creation capabilities in the enterprise where dissemination of knowledge and effective sharing of information through collaboration spur creativity and stimulate business practices. The paper draws an original approach for the design and development of a universal information/knowledge visualisation tool and outlines the mechanics that enable the working prototype that focuses on CAD.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	12e3
authors	Ahmad Rafi, M.E., Che Zulkhairi, A. and Karboulonis, P.
year	2002
title	Interactive Storytelling and Its Role in the Design Process
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 151-158
doi	https://doi.org/10.52842/conf.caadria.2002.151
summary	Projects of ever increasing complexity and size have incited the need for new and robust design methodologies and tools in an effort to manage complexity, lower costs, ascertain quality and reduce risk. Technology convergence through the growing availability of networked computers, rapid progress in Computer Aided Design (CAD) and information management have encouraged the undertaking of even more complex designs that demand high degrees of interaction, collaboration and the efficient sharing and dissemination of information. It is suggested that interactive storytelling and interactive design (Rafi and Karboulonis, 2001) techniques that use non-linear information mapping systems can be deployed to assist users as they navigate information that is structured to address localized needs as they arise. The design process is a collaborative effort that encompasses diverse knowledge disciplines and demands the management and utilization of available resources to satisfy the needs of a single or set of goals. It is thought that building industry specialists should work close together in an organised manner to solve design problems as they emerge and find alternatives when designs fall short. The design process involves the processing of dynamic and complex information, that can be anything from the amount of soil required to level lands - to the needs of specific lightings systems in operation theatres. Other important factors that affect the design process are related to costs and deadlines. This paper will demonstrate some of our early findings in several experiments to establish nonlinear storytelling. It will conclude with a recommendation for a plausible design of such a system based on experimental work that is currently being conducted and is reaching its final stages. The paper will lay the foundations of a possible path to implementation based on the concept of multi-path animation that is appropriate for structuring the design process as used in the building industry.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	9c41
authors	Ahmad Rafi, M.E., Chee W.K., Mai, N., Ken, T.-K. N. and Sharifah Nur, A.S.A. (Eds.)
year	2002
title	CAADRIA 2002 [Conference Proceedings]
source	Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X / Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
doi	https://doi.org/10.52842/conf.caadria.2002.
summary	Evolution of trends in the realm of computer aided architectural design (CAAD) has seen the convergence of technologies – complementing traditional tools with emerging sciences like Information Technology (IT) and multimedia applications. This appliqué of technologies has not just expanded the scope and enhanced the realm of CAAD research and practice, but is also breaking new frontiers. This creative nexus will be realised at the 7th International Conference on Computer Aided Architectural Design Research In Asia (CAADRIA 2002) to be held at the Faculty of Creative Multimedia, Multimedia University, Malaysia, between 18th-20th April, 2002. CAADRIA 2002’s theme, "Redefining Content", seeks to recognise and infuse these emerging components in the field of architecture and design with a holistic approach towards online, digital and interactive systems. The 41 papers compiled were selected through a blind review process conducted by an international review panel. To reflect the multi-disciplinary nature of this year's conference, the chapters are arranged topically to facilitate the in-depth study of key components. The component sessions include: // Web Design, Database and Networks // CAD, Modelling and Tools // Collaborative Design, Creative Design and Case Reasoning // Simulation and Prototyping // Virtual Environment and Knowledge Management // Design Education, Teaching and Learning /// We believe that this specialised approach will provide a deeper and more illuminating feel of the various components and their critical convergence in the field of architecture and design.
series	CAADRIA
email
more	www.caadria.org
last changed	2022/06/07 07:54

_id	caadria2002_000
id	caadria2002_000
authors	Ahmad Rafi, Mohamed Eshaq; Khong, Chee Weng; Neo, Mai; Neo, Ken TK; Syed, Ahmad; Sharifah, Nur Antasha (eds.)
year	2002
title	CAADRIA 2002
source	Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
doi	https://doi.org/10.52842/conf.caadria.2002
series	CAADRIA
last changed	2022/06/07 07:49

_id	ddssar0202
id	ddssar0202
authors	Akin, Ömer and Özkaya, Ipek
year	2002
title	Models of Design Requirement
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Case studies show that significant proportions of design errors and failures are linked to poor requirement specification during both early stages of design and as changes occur. Computational requirements engineering as a front-end to design iterations is a promising area addressing theseproblems. In other design disciplines, such as in software engineering, requirement engineering has given significant product improvements. In this paper, we present a state-space representation of requirement models for architectural design. The purpose of requirement modeling in design is tocreate a process by which requirements can be converted into working design solutions through frontend validation. We suggest three models of requirement specification, co-evolutionary [CoM], multiple domain [MDM] and single domain [SDM] models, that can facilitate this effort. Taken together all three models provide a full set of logical permutations of requirement-solution “worlds” and “operations.” We compare each model against the others in terms of facilitating change management and computability.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssup0201
id	ddssup0201
authors	Alexiou, K. and Zamenopoulos, T.
year	2002
title	Artificial Design and Planning Support: Interactive Plan Generation andCoordination in Distributed Decision-Making
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	In this paper we discuss some basic issues pertaining to artificial plan design as a paradigm for architectural design and urban planning support. We present a model for artificial design generation based on learning control methodologies. Plan design is seen as a search for "coordinated" solutions (changes) that satisfy distributed domain requirements and views expressed by human or artificial agents. Learning control is used as a method to search for solutions that direct partial descriptionsproduced by agents, to follow their dynamically defined targets -despite conflicting requirements. The model is simulated for land use and layout plan design, involving decisions for the location and physical configuration of a hypothetical housing and retail development.
series	DDSS
last changed	2003/11/21 15:15

_id	1636
authors	Aly, Safwan and Krishnamurti, Ramesh
year	2002
title	Can Doors and Windows Become Design Team Players?
source	Gero JS and Brazier FMT (eds) (2002) Agents in Design 2002. Key Centre of Design Computing and Cognition, University of Sydney, pp. 3-22
summary	In an architectural design session, suppose design objects such as doors, windows and rooms can look after themselves, what kind of recommendations would a designer get? What is the nature of a design environment that facilitates such interactions? Where would a design object acquire the knowledge that allows it to interact intelligently? How would such localized recommendations be aggregated to support global design decisions made by the designer? This paper investigates these questions through the notion of objects as agents in design.
series	other
last changed	2003/11/21 15:15

_id	bcf7
authors	Arvin, Scott A. and House, Donald H.
year	2002
title	Modeling architectural design objectives in physically based space planning
source	Automation in Construction 11 (2) (2002) pp. 213-225
summary	Physically based space planning is a means for automating the conceptual design process by applying the physics of motion to space plan elements. This methodology provides for a responsive design process, which allows a designer to easily make decisions whose consequences immediately propagate throughout the design. It combines the speed of automated design methods with the flexibility of manual design methods, while adding a highly interactive quality and a sense of collaboration with the design itself. In our approach, the designer creates a space plan by specifying and modifying graphic design objectives rather than by directly manipulating primitive geometry. The plan adapts to the changing state of objectives by applying the physics of motion to its elements. For design objectives to affect a physically based space plan, they need to apply appropriate forces to space plan elements. Space planning can be separated into two problems, determining topological properties and determining geometric properties. Design objectives can then be categorized as topological or geometric objectives. Topological objectives influence the location of individual spaces, affecting how one space relates to another. Geometric objectives influence the size and shape of space boundaries, affecting the dimensions of individual walls. This paper focuses on how to model a variety of design objectives for use in a physically based space planning system. We describe how topological objectives, such as adjacency and orientation can be modeled to apply forces to space locations, and how geometric objectives, such as area, proportion, and alignment, can be modeled to apply forces to boundary edges.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	1d66
authors	Asanowicz, Aleksander
year	2002
title	Hybrid Design Environment
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 572-576
doi	https://doi.org/10.52842/conf.ecaade.2002.572
summary	This paper discusses some preliminary ideas concerning new design environment or environment of designing. Main thesis of this paper is that process of creation and perception of architecture proceed between Real and Virtual. Architecture is created by analog and/or digital media. A the result we have the multitude and diversity of spaces and tools. Defining these terms is important for understanding a new process of design and a new space of designing. It gives us possibilities to create the new design environment, in which creation of architectural form may be considered as an integrated process connecting the analog, the digital, the real and the virtual. Architectural space, as we know it from physical environments, is supplemented by a virtual space. Physical, architectural and virtual spaces share very similar features in simulation. In virtual models, the boundary between the representation of physical sites and imaginary, virtual sites is vanishing rapidly, resulting in a new reality.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade03_587_34_asanowicz
id	ecaade03_587_34_asanowicz
authors	Asanowicz, Alexander
year	2003
title	Architectural Composition in Digital Space
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 587-590
doi	https://doi.org/10.52842/conf.ecaade.2003.587
summary	In this paper the possibilities of using the computers at course of architectural compositions are considered. As the start point of the new teaching method of architectural composition we used the course of tradition architectural composition, elaborated at our Faculty. The course of Digital Architectural Composition was finished in 2002. The main goal of using the new digital media for modelling architectural forms was checking the new possibilities of form creation. Traditionally, searching of forms at the conceptual design stage is performed by using sketches, drawings and physical models. Our new method showed that is possible to do the same thing using the computerbased 3D modelling, experiencing no physical limitations of the 'real' substance. At the same time, at the early design stages, when formal value is sought, computer modelling can be done almost intuitively. In ours work we try to find a creative way of using computer - transforming the tool into medium. The attention was paid on exploring the possibilities characteristic for computers and not available with traditional methods of modelling. Architect’s tradition tools are effectively replaced by a computer, which create a new way of doing things.
keywords	Architectural composition, computer modelling, method of teaching
series	eCAADe
email
last changed	2022/06/07 07:54

_id	f321
authors	Ataman, Osman and Bermudez, Julio
year	2002
title	ACADIA'99: media effect on architectural design
source	Automation in Construction 11 (2) (2002) pp. 131-134
summary	The idea of this conference arose from various discussions between us in various different places.We decided to put a proposal together for bothpositions—Technical Chairs and Site Organizers. This was unprecedented and we were anxious. We really wanted to run this conference and run it in Salt Lake City. Our theme AMedia and Design ProcessB was a timely topic and both of us were working on and around it. We thought it was interesting and challenging to define the terms and to establish the relationships between architecture, representation andmedia. In fact, all throughout the history of architecture, representation, media and design have beenrecognized to have a close relationship. Interpretations as to what exactly this relationship is or meanshave been subject to debate, disagreement and changealong the ages. Whereas much has been said about the dialectics between representation and design, little has been elaborated on the relationship between media and design. Perhaps, it is not until now, surrounded by all kinds of media at the turn of the millennium, as Johnson argues, that we have enough context to be able to see and address the relationship between media and human activities with some degreeof perspective.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ac57
authors	Bae, H.A., Kim, M.R., Shin, S.Y., Kim, H.A. and Yoon, C.S.
year	2002
title	An Application of Photogrammetry Measuring Technology to Parametric Modeling of Korean Traditional Wooden Structure
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 139-146
doi	https://doi.org/10.52842/conf.caadria.2002.139
summary	To construct a 3D parametric model of Korean traditional wooden structure, the fundamental process is to obtain the dimensions of each building. An application of measuring high technology helps this process accomplished more efficiently. However PhotoModeler is a photogrammetric program to measure the dimension using photographs. The information derived from PhotoModeler is used to clarify the design rule inherent in a Korean traditional mansion type building - UnHyun Palace.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

_id	898a
authors	Bay, J.H.
year	2002
title	Cognitive Biases and Precedent Knowledge in Human and Computer-Aided Design Thinking
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 213-220
doi	https://doi.org/10.52842/conf.caadria.2002.213
summary	Cognitive biases (illusions) and potential errors can occur when using precedent knowledge for analogical, pre-parametric and qualitative design thinking. This paper refers largely to part of a completed research (Bay 2001) on how heuristic biases, discussed by Tversky and Kahneman (1982) in cognitive psychology, can affect judgement and learning of facts from precedents in architectural design, made explicit using a kernel of conceptual system (Tzonis et. al., 1978) and a framework of architectural representation (Tzonis 1992). These are used here to consider how such illusions and errors may be transferred to computer aided design thinking.
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: