Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 505

Reformat results as: short short into frame detailed detailed into frame

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	9f9c
authors	Hu, Xiaochun
year	2002
title	An Information-based Framework for Composites Design
source	Drexel University
summary	The heterogeneity of composites determines that composite materials can be engineered to better satisfy a specific design requirement. The main problems that have hindered the application of composites are the need for the material and manufacturing design to be conducted simultaneously, the involvement of a large number of design factors, the difficulty in the characterization of composites, and the inherent repetition of the design process. Considering these problems, this thesis presents an information-based framework for composites design. This research consists of four main aspects: (1) The development of a heterogeneous CAD modeling algorithm and an integrated CAD/CAE method, and their application in a unit cell-based characterization of composite materials with a complex fiber form; (2)The development of a unit cell database for improving the material and manufacturing process design, which covers the design of its database model and the access strategies based on the logic architecture of unit cells and the relationships among elements of unit cells and with the environments; (3)The design of an Information-Based Design Support System (IBDSS) to support the composites design by using the unit cell database, in which the blackboard framework is adopted for the system to organize various computer techniques for different design stages, and to support the design iterating to satisfactory ones incrementally and efficiently, and the data structure of the blackboard, the algorithm to control design iterations, and design procedures for every stage are studied; and (4) The introduction of a ranking-based unit cell evaluation methodology and effective ranking factors for facilitating and improving the composite design process. The approach improves the efficiency of composites design by automating design iterations, supporting composite characterization, alleviating the cost of composite material and manufacturing method design, and assisting in tailored material selection. Case studies are presented to show how the IBDSS is applied to support composites design.
keywords	Mechanical Engineering
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	c7e0
id	c7e0
authors	Maria Gabriela Caffarena Celani
year	2002
title	BEYOND ANALYSIS AND REPRESENTATION IN CAD: A NEW COMPUTATIONAL APPROACH TO DESIGN EDUCATION
source	Submitted to the Department of Architecture in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the field of Architecture: Design & Computation at the Massachusetts Institute of Technology
summary	This thesis aims at changing students' attitude towards the use of computer-aided design (CAD) in architecture. It starts from the premise that CAD is used mostly for analysis and representation, and not as a real design aide, and that architecture students have a bias against learning computer programming. For this purpose, a prototypical instruction system that mixes computer-aided design and computational design theory was developed, based on a series of fundamental concepts that are common to both fields. This system was influenced by Mitchell's (1987) The Art of Computer Graphics Programming and Stiny's (1976) shape grammars. Despite being based on solid theoretical foundations, CAD has progressively become an exclusively practical tool, since its origins in the 50's and 60's, while computational design theories have been mostly restricted to the academic circles. This thesis proposes an inversion in the present situation: the study of CAD theory, and the application of computational design into practice. The system proposed provides a conceptual framework that can be adapted to different circumstances, including course formats and resources, as well as students' background and technical training. It is based on seven fundamental concepts from computational design theories that are also important to the study of shape grammars: symmetry, recursion, rule-based compositions, parameterization of shapes, generative systems, algorithmization of design procedures, and shape emergence. These concepts are introduced within a CAD context, where their practical implementation and experimentation are possible, focusing the understanding of the computational nature of design. During this research, the proposed system was tested in two case studies with students from schools that had contrary orientations in terms of the importance of CAD in the architectural curriculum. In these experimental courses, students' activities evolved from using a commercial CAD tool in an innovative way, to the use of programming techniques for creating meaningful tools. Despite not having a statistical reach, the fieldwork allowed drawing preliminary conclusions about the proposed system's efficacy, since virtually all the students reported changing their understanding of the role of CAD in architecture, while some also acknowledged a conceptual influence in other subjects and in the way they see architecture.
keywords	Symmetry
series	thesis:PhD
type	normal paper
email
more	http://www.fec.unicamp.br/~celani/
last changed	2004/11/17 20:51

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	49a6
authors	He, J., Tsou, J.-Y. and Lam, S.
year	2002
title	Potential of Using a GIS-based Natural Visual Landscape Evaluation Tool in Large-scale Urban Planning - A Comparative Study in Dongshan New Town
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 478-487
doi	https://doi.org/10.52842/conf.ecaade.2002.478
summary	Natural visual landscape is under deterioration due to improper construction and planning in modern development of China. One of the main reasons is the feebleness in planning supporting methodology and technology in respect for natural visual landscape. In such supporting information, landscape evaluation always acts as a significant component. Especially in comprehensive planning, it is the only approach to access visual value distribution in large-scale region. In this paper, we present a GISbased natural visual landscape evaluation tool through a case study. By an integrated rating statistics function of this tool, visual quality of natural landscape is quantified through analysis in visibility, landuse, and visual resource quality. Then we make comprehensive planning strategies based on this scientific supporting tool. Furthermore, we discuss the potential of this tool by comparing these strategies with schemes of the same project conducted through traditional planning module. This comparative study reveals the efficiency and effectiveness of the tool as well as its implementation in large-scale comprehensive urban planning.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	a22a
authors	Heylighen, Ann and Neuckermans, Herman
year	2002
title	ARE ARCHITECTS NATURAL CASE-BASED DESIGNERS? EXPERTS SPEAKING
source	The Design Journal, Volume 5, Issue 2, 2002, pp. 8-22
summary	Addressing the subject of Case-Based Reasoning in design, this article reports on a series of in-depth interviews with expert architects/design teachers about the role of cases in design practice and education. Several ingredients of the Case-Based Design (CBD) recipe turned out to occur in real-world design, be it in a subtler version than CBD researchers usually assume. The article focuses primarily on design in architecture, yet the findings may be relevant for other design domains as well.
keywords	Architectural Design; Case-based Design; Design Education
series	journal paper
type	normal paper
email
last changed	2005/07/26 18:53

_id	ddssup0208
id	ddssup0208
authors	Kawakami, Mitsuhiko and Zhenjiang, Shen
year	2002
title	Formulation of an Urban and Regional Planning System Basedon a Geographical Information System and its Application- A Case Study of the Ishikawa Prefecture Area of Japan -
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	An Urban and Regional Planning System based on a geographical information system was developed using four sub-systems consisting of a digital map system, a database system, an analysis and forecast system and a planning system. In this case ARCVIEW GIS software was used as a development tool. The digital map system is formulated by the planar orthogonal coordinate system. The data is converted from digital maps issued by the Geographical Survey Institute of Japan (GSI). The database system has layers of data sets, which consist of statistical data, attribute data of geographical points and characteristics of natural features and the built environment. Several sets of principal census data havebeen converted to mesh data. These kinds of data sets are also utilized to this system. LANDSAT TM data is converted into vector data and linked to the same coordinate system. The analysis and forecast system consists of statistical or mathematical analysis, forecasts and visual presentations of the results. The planning system consists of some planning models and reviewing techniques to evaluate alternatives. As an example, this paper examines the relationship between land use and the temperatureon the ground level in built-up areas.
series	DDSS
last changed	2003/08/07 16:36

_id	2d62
authors	Nardelli, Eduardo Sampaio
year	2002
title	Uma estratégia pedagógica para cursos de modelagem digital e renderização em escolas de Arquitetura: o caso da Universidade Presbiteriana Mackenzie [A pedagogical strategy for courses of digital modeling and rendering in schools of Architecture: the case study of the Universidade Presbiteriana Mackenzie]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 228-231
summary	This work aims to relate the methodology that have been applied on the third module of the course “Computação Aplicada à Arquitetura” at Faculdade de Arquitetura e Urbanismo of the Universidade Presbiteriana Mackenzie as a contribution to the debate about pedagogical strategies of the informatics courses in schools of architecture focused in digital models and rendering techniques as a support to the development of the themes proposed in parallel in the Design Studio classes.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	9e16
authors	Neuckermans, H., Heylighen, A. and Morisse, P.
year	2002
title	Visual Keys to Architectural Design
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 175-182
doi	https://doi.org/10.52842/conf.caadria.2002.175
summary	This paper presents a new mechanism to access and interact with DYNAMO, a collective case base for architectural design developed as a Web-based tool. The system is fully operational since a few years in the context of architectural design education as well as for seminars on architectural theory. We have now developed a set of visual keys structured at the one hand according to the Vitruvian tripartition of architecture: Firmitas (structure, materials,…), Utilitas (building programme,…), Venustas (formal qualities/articulation, spatial configuration,…) to which we added Context (topography, site, budget, climate,...) as a supplementary dimension, and at the other hand including three levels of detail: single spaces, building blocks or master plan entities. Visual keys match the architect’s designerly way of thinking. The visual keys are in fact nothing else than a graphical codification of architecture within the realm of architectural composition. The software, that has been developed so far, does not only allow users to access cases via the keys we have implemented, but it also provides a tool to sketch and submit their own keys.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ga0225
id	ga0225
authors	Radojevic, Mirjana Devetakovic and Turner, Raewyn
year	2002
title	Spatial Forms Generated by Music – The Case Study
source	International Conference on Generative Art
summary	This paper resulted from the first stage of an ongoing collaborative research between a multi-senses artist (R. T.) from New Zealand and an architect interested in generic architecture (M. D.) from Yugoslavia. The research examines potential relations between music and architecture and explores the ways music could be a source for generation of spatial forms, and vice versa, whether architecture might generate music. In the first stage of the research two different existing generic principles were combined. The graphical interpretation of the music served as a pattern for creating the spatial forms. In this experiment the Brahms’s Hungarian Dance No1 has been used as an initial generator. The music is transformed into the sequence of linear drawings. Every single drawing potentially defines a spatial composition, while each single line represents an axis of the future spatial form. Together with geometric definitions there are some ambient values, like color, transparency and many others, that can be determined by music. After an overview of results, paper concludes with perspectives for future research that will include time as an additional dimension towards generating dynamic spatial concepts based on music.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ascaad2007_026
id	ascaad2007_026
authors	Sarji, E.A.; A. Rafi and R. Mat Rani
year	2007
title	Preparing a multimedia-based gallery for institute of higher learning: A case study of Malaysian experience
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 305-316
summary	While the majority of medium and small sized institutions still rely on their physical or traditional content, it has been observed a pre-disposition usually by major, recently founded or contemporary art institutions to display net-based projects (Buiani, 2001) and to some extent established as a permanent display. This changing of exhibitions has penetrated in many Asian galleries and as a result many schools trying to re-position and present in such a way that it can be easily changed and adapted to host multimedia, Internet, interactive and computer-based content. This funded research project investigates the functions of gallery in IHL in Malaysia. A triangulated study was conducted to understand the potentials and issues faced by galleries in public and private universities focusing on design schools that include art and design, and architecture. This research starts with the understanding of gallery design theories. It is then followed by a qualitative method survey to all galleries in the IHL. This research continues with an in depth study and a survey on Electronic Gallery (e-Gallery), Faculty of Creative Multimedia (FCM), Multimedia University (MMU) to understand between the theories and design ideas. A set of questionnaires was developed based on Mathews (1991) and Stewart’s (2002) principles and guidelines on research methods and distributed to visitors throughout a period of time consisting of open-ended, close-ended, Likert Summated Rating Scale and Multiple-choice. This involved a controlled group of visitors comprises students and staff of the faculty. The results of these studies will be used as a reference to further conduct a wider scope of galleries worldwide towards designing a multimedia-based gallery framework for Institute of Higher Learning.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ddssup0218
id	ddssup0218
authors	Stouffs, R., Tunçer, B. and Sariyildiz, V.
year	2002
title	WoonWerf.nl Revisited: The Potential of Web-Based Design Communication with Future Clients
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	The web offers the means to reach out to potential customers and clients. It enables the establishment of a communication link that allows designers to probe the preferences of their customers, and potential clients to be heard in the design process. It can also serve as a communication platform for customers and other interested parties to share and express ideas and concerns. Opening up the design process to future stakeholders and other concerned parties is particularly accommodating in the aspiration to aconsensus model, as is the case in Dutch architecture. In this paper, we present an example of a Dutch residential development project in which the web served to reach out to potential clients. It involved visitors through a sequence of design “games” in the site planning process. Resulting data were analyzed and provided to the design team, and consequent design decisions found their way into subsequent games. By supporting additional communication among visitors and users, including the design team, visitors would be able to assess their own ideas against others, potentially improving the overall quality of contributions. Such support was envisioned though not implemented in the example. In this paper, we present the actual communication model adopted and consider its extension to support a virtual community for design communication with interested clients in a residential development project.
series	DDSS
last changed	2003/08/07 16:36

_id	sigradi2003_092
id	sigradi2003_092
authors	Castañé, D., Tessier, C. and Deho, C.
year	2003
title	Prácticas educativas: su impacto y riesgo en las tecnologías digitales (Educational Practices: Their impact and risk in digital technologies)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Based on the latest didactic teaching theories, this project presents a critical analysis of dynamic educational practices, which have been actively utilized through the last decade by the department of research and instruction in the School of Architecture at the University of Buenos Aires. This work proposes a journey through the landmarks that recognize the impact of technology on teaching best practices, mainly contained in a technical course. It presents the didactic theories of Bruner (90), Perkins, Gardner (93), Burbules (2001), E. Litwin (2002) and others. Crucial representative work developed by students has been taken to introduce criteria and construct practical reflections to arrive at an enriching proposition.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ga0213
id	ga0213
authors	Herr, Christiane M.
year	2002
title	Generative Architectural Design and Complexity Theory
source	International Conference on Generative Art
summary	During the past decades, complexity theory has evolved as a new discipline that provides a broad scientific perspective towards dynamic real-life phenomena, challenging the classical linear worldview as well as simple cause-and-effect-style Newtonian physics. For architects, the advent of this new science offers the challenge as well as the chance to reconsider common design approaches and to invent new strategies based on the new paradigms. The actual application of complexity theory to architectural design, however, results in a fundamental dilemma: How can a reflective, ultimately retrospective body of thought (complexity theory) be applied to prospective design challenges (architecture)? Being part of a current MArch thesis project, the proposed paper focuses on this general dilemma between architectural design and complexity theory and discusses actual as well as potential future generative architectural design approaches involving complexity theory. Generative design strategies commonly apply algorithmic methods and formalisms, which can conveniently produce and deal with high levels of complexity. Complexity describes general properties of a system and can be further dissected into several modes: epistemic, ontological and functional complexity. This taxonomy offers insights into generative design applications, which have mostly focused on a limited set of complexity modes. Besides complexity generated by sheer numbers, aspects like functional or hierarchical complexity offer further perspectives on generative systems, processes and output. Considering these aspects of complexity theory, future challenges to generative architectural design can be predicted.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	sigradi2006_e149b
id	sigradi2006_e149b
authors	Kendir, Elif
year	2006
title	Prêt-à-Construire – An Educational Inquiry into Computer Aided Fabrication
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 162-165
summary	This paper aims to show and discuss the relevance of developing necessary strategies for reintegrating the concept of fabrication into the architectural design process. The discussion will be partly based on the outcome of a graduate architectural design studio conducted in Spring semester 2002-2003. The graduate studio was part of a series of exploratory studies conducted on the nature of architectural design process transformed by information technologies. Preceded by studios investigating cognition and representation, this last studio focused on the concept of fabrication. The overarching aim of the studio series was to put CAD and CAM in context both within the actual architectural design process and within architectural education. The last of this series, which will be discussed within the frame of this paper, has specifically focused on CAM and the concept of fabrication in architecture. In accordance with the nature of a design studio, the research was more methodological than technical. The studio derived its main inspiration from the constructional templates used in dressmaking, which can be considered as an initial model for mass customization. In this context, the recladding of Le Corbusier’s Maison Domino was given as the main design problem, along with several methodological constraints. The main constraint was to develop the design idea through constructional drawings instead of representational ones. The students were asked to develop their volumetric ideas through digital 3D CAD models while working out structural solutions on a physical 1/50 model of Maison Domino. There was also a material constraint for the model, where only specified types of non-structural paper could be used. At this stage, origami provided the working model for adding structural strength to sheet materials. The final outcome included the explanation of different surface generation strategies and preliminary design proposals for their subcomponents. The paper will discuss both the utilized methodology and the final outcome along the lines of the issues raised during the studio sessions, some of which could be decisive in the putting into context of CAD – CAM in architectural design process. One such issue is mass customization, that is, the mass production of different specific elements with the help of CAM technologies. Another issue is “open source” design, indicating the possibility of a do-it-yourself architecture, where architecture is coded as information, and its code can be subject to change by different designers. The final key issue is the direct utilization of constructional drawings in the preliminary design phase as opposed to representational ones, which aimed at reminding the designer the final phase of fabrication right from the beginning. Finally, the paper will also point at the problems faced during the conduct of the studio and discuss those in the context of promoting CAM for architectural design and production in countries where there is no actual utilization of these technologies for these purposes yet.
keywords	Education; Fabrication; CAM
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	9c41
authors	Ahmad Rafi, M.E., Chee W.K., Mai, N., Ken, T.-K. N. and Sharifah Nur, A.S.A. (Eds.)
year	2002
title	CAADRIA 2002 [Conference Proceedings]
source	Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X / Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
doi	https://doi.org/10.52842/conf.caadria.2002.
summary	Evolution of trends in the realm of computer aided architectural design (CAAD) has seen the convergence of technologies – complementing traditional tools with emerging sciences like Information Technology (IT) and multimedia applications. This appliqué of technologies has not just expanded the scope and enhanced the realm of CAAD research and practice, but is also breaking new frontiers. This creative nexus will be realised at the 7th International Conference on Computer Aided Architectural Design Research In Asia (CAADRIA 2002) to be held at the Faculty of Creative Multimedia, Multimedia University, Malaysia, between 18th-20th April, 2002. CAADRIA 2002’s theme, "Redefining Content", seeks to recognise and infuse these emerging components in the field of architecture and design with a holistic approach towards online, digital and interactive systems. The 41 papers compiled were selected through a blind review process conducted by an international review panel. To reflect the multi-disciplinary nature of this year's conference, the chapters are arranged topically to facilitate the in-depth study of key components. The component sessions include: // Web Design, Database and Networks // CAD, Modelling and Tools // Collaborative Design, Creative Design and Case Reasoning // Simulation and Prototyping // Virtual Environment and Knowledge Management // Design Education, Teaching and Learning /// We believe that this specialised approach will provide a deeper and more illuminating feel of the various components and their critical convergence in the field of architecture and design.
series	CAADRIA
email
more	www.caadria.org
last changed	2022/06/07 07:54

_id	ddssar0202
id	ddssar0202
authors	Akin, Ömer and Özkaya, Ipek
year	2002
title	Models of Design Requirement
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Case studies show that significant proportions of design errors and failures are linked to poor requirement specification during both early stages of design and as changes occur. Computational requirements engineering as a front-end to design iterations is a promising area addressing theseproblems. In other design disciplines, such as in software engineering, requirement engineering has given significant product improvements. In this paper, we present a state-space representation of requirement models for architectural design. The purpose of requirement modeling in design is tocreate a process by which requirements can be converted into working design solutions through frontend validation. We suggest three models of requirement specification, co-evolutionary [CoM], multiple domain [MDM] and single domain [SDM] models, that can facilitate this effort. Taken together all three models provide a full set of logical permutations of requirement-solution “worlds” and “operations.” We compare each model against the others in terms of facilitating change management and computability.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
doi	https://doi.org/10.52842/conf.acadia.2007.174
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

For more results click below: