Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 515

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2006_179
id	caadria2006_179
authors	KEATRUANGKAMALA K., NILKAEW P.
year	2006
title	STRONG VALID INEQUALITY CONSTRAINTS FOR ARCHITECTURAL LAYOUT DESIGN OPTIMIZATION
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 179-185
doi	https://doi.org/10.52842/conf.caadria.2006.x.w5d
summary	In the past decades, many attempts have been made to solve the challenging architectural layout design problem such as non-linear programming and evolutionary algorithm (Michalek and Papalambros, 2002). The Mixed Integer Programming (MIP) (Kamol and Krung, 2005) was recently developed to find the global optimal solution. However, the problem can be shown to belong to the class of NP-hard problem (Michalek and Papalambros, 2002). Hence, only the small instances of the problem can be solved in a reasonable time. In order to deal with large problem sizes, this paper utilizes the strong valid inequalities (George and Laurence). It cut off the infeasible points in the integral search space by formulated the disconnected constraints involved with line configurations of three rooms. It is shown to significantly increase the computational speed to more than thirty percents. This exhibits the practical use of the MIP formulation to solve the medium size architectural layout design problems.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	3183
authors	Da Veiga, Jose and La Roche, Pablo
year	2002
title	A Computer Solar Analysis Tool for the Design and Manufacturing of Complex Architectural Envelopes: EvSurf
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 105-109
summary	Heat flows (gains or losses) in a building are affected by solar radiation, internal gains and temperature differences. A prototype of a tool that evaluates solar radiation on building envelopes has been developed as an applet to run on the Internet. This tool analyses the relationship of the solar position with the surfaces of complex envelopes by evaluating the potential amount of direct solar radiation that each surface section receives as a function of the angle of each surface with the sun for specific days and latitudes. A fitness function rates the overall performance of the proposed building envelope at specific hours or whole days, permitting to compare alternatives. Because of its characteristics, this tool is a Very Simple Design tool that works interactively with the user during the design process helping to design solar responsive building envelopes.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	5938
authors	Hong, Z., Shi, J.J. and Tam, C.M.
year	2002
title	Visual modeling and simulation for construction operations
source	Automation in Construction 11 (1) (2002) pp. 47-57
summary	Simulation practitioners in construction often experience difficulties in developing simulation models, i.e., tediousness and error-proneness. The visual environment presented in this paper gives users user-friendly support throughout the entire simulation development process, with the provision of a visual modeling interface, easy-to-use icon animation, and dynamic statistics. Under the visual modeling interface, modeling construction operations is completed through editing activity-based graphics as the standard graphic editing tools do, and no programming is required. An easy-to-use animation can facilitate communication between the simulation model and users, and assist users in verification and validation of the simulation model. Instead of creating 3-D images with adequate skills and much time, this animation takes the graphic simulation model as the background images and the pre-created 2-D iconic images as moving objects, in order that the preparing for animation is simple.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	6795
id	6795
authors	KOUZELEAS Stelios
year	2005
title	DEFINITION OF A METHOD OF LIMITS OF THE SIMPLIFICATION OF A HALL MODEL IN A CAD SYSTEM TO DIMINISH FALSIFICATION OF ACOUSTIC SIMULATION RESULTS
source	International Congress eCAADe 2005 (Education and research in Computer Aided Architectural Design in Europe), subject : “Digital Desing : the quest for new paradigms”, ISBN 0-9541183-2-4, pp. 695-704, Technical University of Lisbon, Portugal, 21-24 September 2005
summary	During the modelling, because of the sometimes complex architectural shape of halls, we were forced to introduce simplifications in order to carry out calculations and simulation operations on these halls, as the calculation software requires plane surfaces. This paper presents a developed tool adapted on a CAD modelling system (AutoCAD), which defines an “average limits” of the model simplification operation in order to control and diminish the falsification of calculation and simulation results on this model, such as the architectural acoustic simulation. The process of the elaboration and the adjustment of the simplified models of the Grand Theatre of Bordeaux (GTB) based on acoustical measurements and their calculation results are described in detail in a previous article (Kouzeleas and Semidor, 2001). The analysis process of the consequences of the hall model simplification on the acoustical simulation results and the applied simplification methods are described in a PhD thesis (Kouzeleas, 2002). This article is based on this analysis process in order to apply it on several simplified models of the Amphitheatre of the Architecture School of Bordeaux (Amphi-EAPB). The comparison in a CAD system (AutoCAD) of the acoustical calculation results and the areas after simplification of the simplified models of these two halls made with AutoCAD, via the developed tool adapted on the AutoCAD, permit to define a “limits average of a hall model simplification” before the falsification of these calculation results.
series	other
type	normal paper
email
more	http://www.civil.ist.utl.pt/ecaade05/
last changed	2005/10/25 12:19

_id	2005_695
id	2005_695
authors	Kouzeleas, Stelios Th.
year	2005
title	Definition of a Method of Limits of the Simplification of a Hall Model in a CAD System to Diminish Falsification of Acoustic Simulation Results
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 695-704
doi	https://doi.org/10.52842/conf.ecaade.2005.695
summary	During the modelling, because of the sometimes complex architectural shape of halls, we were forced to introduce simplifications in order to carry out calculations and simulation operations on these halls, as the calculation software requires plane surfaces. This paper presents a developed tool adapted on a CAD modelling system (AutoCAD), which defines an “average limits” of the model simplification operation in order to control and diminish the falsification of calculation and simulation results on this model, such as the architectural acoustic simulation. The process of the elaboration and the adjustment of the simplified models of the Grand Theatre of Bordeaux (GTB) based on acoustical measurements and their calculation results are described in detail in a previous article (Kouzeleas and Semidor, 2001). The analysis process of the consequences of the hall model simplification on the acoustical simulation results and the applied simplification methods are described in a PhD thesis (Kouzeleas, 2002). This article is based on this analysis process in order to apply it on several simplified models of the Amphitheatre of the Architecture School of Bordeaux (Amphi- EAPB). The comparison in a CAD system (AutoCAD) of the acoustical calculation results and the areas after simplification of the simplified models of these two halls made with AutoCAD, via the developed tool adapted on the AutoCAD, permit to define a “limits average of a hall model simplification” before the falsification of these calculation results.
keywords	Calculation Cad Program Integrated Development ; Design Process ; 3D Modeling ; Performance Simulation ; Acoustic Simulation Results
series	eCAADe
email
last changed	2022/06/07 07:52

_id	49e5
authors	Lehtinen, Saku
year	2002
title	Visualization and teaching with state-of-the-art 3D game technologies
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 538-541
doi	https://doi.org/10.52842/conf.ecaade.2002.538
summary	This paper describes the use of the latest 3D game technologies and game editing tools in architectural modeling and visualization. The differences to more conventional rendering techniques, the benefits and the disadvantages of using these tools in architectural teaching are discussed.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	6cde
authors	Liapi, Katherine A.
year	2002
title	Transformable Architecture Inspired by the Origami Art: Computer Visualization as a Tool for Form Exploration
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 381-388
doi	https://doi.org/10.52842/conf.acadia.2002.381
summary	Membrane packaging has been the main feature of the earliest prototypes of transformablearchitecture. Similar concepts of spatial transformation are encountered in the origami art where aplanar paper surface, after folding, transforms to a 3-dimentional object. The geometric configuration ofcreases on a sheet of paper before folding, as well as the topological properties of 3D origami papermodels, have been recently addressed, and can be used as a guide for the design of new forms.Because membranes in general can be considered surfaces of minimal thickness, principles of theorigami art and math can find applications in the conception and design of transformable membranestructures for architecture. This paper discusses how computer visualization can be used to explorethe potential application of ideas borrowed from the origami art in the conceptual design oftransformable structures. A two-case study that shows how origami math is integrated in the computervisualization of a potential architectural application is included. The same study also shows thatanimated simulations of the transformation process during folding can identify problems in the initialgeometric conception of an origami type structure, and can be used for further morphologicalexplorations.
series	ACADIA
last changed	2022/06/07 07:59

_id	b2f6
authors	Schira, Gretchen
year	2002
title	Analysis of Digital Image Properties and Human Preference
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 413-422
doi	https://doi.org/10.52842/conf.acadia.2002.413
summary	The three studies summarized in this paper present evidence that aesthetic preference for visualsurface texture is closely correlated with spatial frequency and orientation. The stimuli used were digitalversions of real environments, in the sense that they originated in photographs of real surfaces.Correlations are significant, and robust, and they were not effected by identifiability of the images.Theoretically, this points to the possibility that aesthetic preferences for objects in the builtenvironment—‘virtual’ and ‘real’—are not exclusively devoted to culture, memory and association, aspost-modern discourse would dictate. Although more work needs to be done, it nevertheless points tothe potential that preference for digital/virtual as well as real architectural environments be consideredthe visual stimuli to which human beings are neurologically tuned. Digital technology provides themeans to implement such research, and computer simulations of ‘real’ environments will be the firstapplication. With an ability to adapt aesthetically to the changing human condition, the importantquestions are how should one adapt such surfaces and under what criteria or under what influence arethe adaptations made?
series	ACADIA
email
last changed	2022/06/07 07:57

_id	drs_thesis_0902
id	drs_thesis_0902
authors	Shelden, D.
year	2002
title	Digital Surface Representation and the Constructability of Gehry’s Architecture
source	PhD Thesis MIT, Cambridge, MA
summary	This thesis presents work in the development of computational descriptions of Gehry’s architectural forms. In Gehry’s process for realizing buildings, computation serves as an intermediary agent for the integration of design intent with the geometric logics of fabrication and construction. This agenda for digital representation of both formal and operational intentions, in the context of an ongoing exploration of challenging geometries, has provided new roles for computation in architectural practice. The work described in this thesis focuses on the digital representation of surface geometry and its capacity for describing the constructibility of building enclosure systems. A particular class of paper surface forms – curved surfaces with minimal in plane deformation of the surface material – provide the specific object of inquiry for exploring the relationships between form, geometry and constructibility. An analysis and framework for the description of Gehry’s geometry is developed through existing theory of differential geometry and topology. Geometric rules of constructibility associated with several enclosure system strategies are presented in this framework. With this theoretical framework in place, the discussion turns to efforts to develop generative strategies for the rationalization of surface forms into constructible configurations.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	3177
authors	Takeyama, M., Wojtowicz, J., Butelski, K. and Watanabe , E.
year	2002
title	Aspects of Space in Contemporary Design
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 322-327
doi	https://doi.org/10.52842/conf.ecaade.2002.322
summary	Computer dependent design space is illustrated with the recent international competition project for Kowloon Arts Center. The spatial condition of design resulted from the deployment of Euclidian geometry and use of the non-rational, complex surfaces. Another aspect of computer dependent space was rooted in the contemporary work situation where architects located on the three different continents collaborated in distributed mode over the internet. The resulting project confirms the creative potential of the above aspects of the digital space in contemporary design.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	a555
authors	Trujillo, Iván León
year	2002
title	Hacia un vínculo entre el boceto y las herramientas de modelado NURBS: La representación de superficies de doble curvatura en el diseño industrial [The link between the Sketch and Tools of Modeled NURBS: The Representation of Surfaces of Double Curvature in Industrial Design ]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 289-290
summary	This poster shows a methodological approach developed at the School ofIndustrial Design (Universidad de Los Andes, Venezuela) in order to achievethree objectives. Firstly, to assist future industrial designers to analyze and guide their ideas during the early stages of the design process with a sort of graphics, whose expressive precision is different to the metric one. Secondly, to help students to improve their graphic skills in order to communicate their ideas to others during the form creation phases of thedesign process. Thirdly, to promote the use of drawing as a way to define a link between hand drawing and modeling in CAD’s NURBS*. These aspects are especially relevant if we consider that such methodological links, although are frequently assumed by some design firms, they have been hardly visualized in the academic environment as part of the “teaching- learning” process.
keywords	Industrial design / Double-curved surfaces / Representation and communication / Product’s graphics.
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	8780
authors	Abdelhameed, W., Ozel, F., Addelatiff, M. and Daef, A.
year	2002
title	Assessment of the Impact of Digital-Manual Media Types on the Basic Design Capabilities of Architects: A Proposed Framework and Directive Measures
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 275-276
summary	The research attempts to defi ne and classify the design capabilities of architects into a basic framework. This defi nition will be useful in understanding and determining the types and nature of impact introduced by digital and manual media used during architecturaldesign process. The research consists of three parts. The First part reviews the main stages, tasks and activities of the architectural design process. The second part builds the proposed framework of design capabilities relating them to the specifi c tasks and activities conductedby the architect along the design process. The third part proposes some useful measures as to how to make use of the proposed framework in assessing the impact of media on the design capabilities of architects.
series	SIGRADI
last changed	2016/03/10 09:47

_id	ddssar0201
id	ddssar0201
authors	Achten, H.H.
year	2002
title	Requirements for Collaborative Design in Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The concept of collaborative design has recently come under renewed attention in the field of computer aided architectural design support. Although collaborative design deals with the same aspects of cooperation by various participants in the design process as previously studiedin, for example, concurrent engineering and multi-disciplinary design, it nevertheless puts a different research emphasis. Collaborative design looks at how the process can be improved in such a way that collaboration –working together in a manner to enhance each participants contribution to the design– emerges from the process. In engineering design practice, thismeans a shift forward in the design process where engineers are asked earlier for their input in the design solution. For CAAD research, the phenomenon of collaborative design poses the question how design tools and environments can be made in such a way that collaboration will occur. In this paper, the aims is to describe the concept of collaborative design in architecture, and to give an outline of the perceived requirements in the organisation of design and Computer Aided Design Support to achieve collaborative design.
series	DDSS
last changed	2003/11/21 15:15

_id	ba50
authors	Achten, Henri and Jessurun, Joran
year	2002
title	An Agent Framework for Recognition of Graphic Units in Drawings
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 246-253
doi	https://doi.org/10.52842/conf.ecaade.2002.246
summary	Architects use graphic conventions in their drawings that have meaningful content to the design task. In previous work, such well-defined sets of graphic entities have been identified and defined. These sets are called graphic units. In this paper, we discuss how graphic unit recognition in drawings can take place using a multi-agent systems approach. This approach seems promising as singular agents may specialize in graphic unit-recognition, and multi-agent systems can address problems of ambiguity through negotiation mechanisms. We present an agent framework for this purpose, how it connects to the theory of graphic units, and how agents for recognizing graphic units are defined. The paper ends with a discussion of current findings and future work.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	765f
authors	Adam, Holger
year	2002
title	Reinterpretation or replacement? The effects of the information and communication technologies on urban space
source	CORP 2002, Vienna, pp. 345-349
summary	The timid question “Virtual spaces or real places?” forms the core of many debates within the spatial sciences addressing theconsequences of the rapid development of information and communication technologies1 on existing spatial structures. So far several opinions rival each other for the interpretation of current and the prediction of future spatial developments. The spacelessness ofcomputer networks and the possibility to transmit data in real-time have lead visionaries to predict a far-reaching devaluation of timeand space, so questioning the future importance of traditional spatial structures: The “annihilation of distance and time constraints [incomputer networks] could undermine the very rationale for the existence of the city by dissolving the need for physical proximity”(Graham and Marvin 1996: 318). The disappearance of the city into the net, therefore, seems to become a distinct possibility.
series	other
email
more	www.corp.at
last changed	2003/11/21 15:15

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	6b70
authors	Af Klercker, Jonas and Pittioni, Gernot
year	2002
title	Architect and Structural Engineer in interactive design
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 386-389
doi	https://doi.org/10.52842/conf.ecaade.2002.386
summary	We are convinced that an interactive design process involving engineers and architects will create values to a project. Looking back there have been some obstacles, like a week’s time for exchange of drawings with traditional postal services; manual calculation methods, which could not be spoiled on loose grounds like architect’s sketches; different media – architect’s drawings and engineer’s numbers in tables; attitudes and traditional roles, implemented already in education. Today most of these obstacles can be overcome and we have made a test. We have used ArchiCad by Graphisoft and FEM-design by SKANSKA IT Solutions to test to make an interactive design. Our conclusions are that exchange of information, drawings and other documents is more or less routine in praxis, and it works almost instantly. Computers make calculation faster and easier for the engineer. Though we would wish to have software which manages to do more rapid estimations. Even simulations such as of loads on a structure are practically possible. By using model based CAD the data can be used for transferring quantities for calculations as well as visualization of the design as a platform for collaborate analysis. The technique is developed and usable but to gain acceptance and make use of it is also a matter of attitudes and of application activities in education.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	730e
authors	Af Klercker, Jonas
year	1997
title	Implementation of IT and CAD - what can Architect schools do?
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 83-92
summary	In Sweden representatives from the Construction industry have put forward a research and development program called: "IT-Bygg 2002 -Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. A seminar was held with some of the most experienced researchers, developers and practitioners of CAD in construction in Sweden. The activities were recorded and annotated, analysed and put together afterwards; then presented to the participants to agree on. Co-operation is the key to get to the goals - IT and CAD are just the means to improve it. Co-operation in a phase of implementation is enough problematic without the technical difficulties in using computer programs created by the computer industry primarily for commercial reasons. The suggestion is that cooperation between software companies within Sweden will make a greater market to share than the sum of all individual efforts. In the short term, 2 - 5 years, implementation of CAD and IT will demand a large amount of educational efforts from all actors in the construction process. In the process of today the architect is looked upon as a natural coordinator of the design phase. In the integrated process the architect's methods and knowledge are central and must be spread to other categories of actors - what a challenge! At least in Sweden the number of researchers and educators in CAAD is easily counted. How do we make the most of it?
series	AVOCAAD
last changed	2005/09/09 10:48

_id	461b
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2002
title	The Role of Advanced VR Interfaces in Knowledge Management and Their Relevance to CAD
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 277-284
doi	https://doi.org/10.52842/conf.caadria.2002.277
summary	This paper introduces knowledge management and computer aided visualisation as a key in establishing both valuation and value creation capabilities in the enterprise where dissemination of knowledge and effective sharing of information through collaboration spur creativity and stimulate business practices. The paper draws an original approach for the design and development of a universal information/knowledge visualisation tool and outlines the mechanics that enable the working prototype that focuses on CAD.
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: