Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 494

Reformat results as: short short into frame detailed detailed into frame

_id	6f10
authors	Petric, J., Maver, T.W., Conti, G. and Ucelli, G.
year	2002
title	Virtual Reality in the Service of User Participation
source	Distributing Knowledge in Building. Proceedings of CIB W78 Conference (Ed. K Agger et al), Aarhus, 217-224
summary	The normal application of Virtual Reality is to the simulation of environments which are in some way special - remote, hazardous or purely imaginary. This paper describes research and development work which changes the paradigm by simulating perfectly ordinary buildings for special people. Some of the population have some form of physical impairment - a proportion which is likely to rise in line with an ageing population. New legislation, such as the UK Disability Discrimination Act places additional responsibility on building owners to ensure adequate access for people with an impairment and this in turn will place additional responsibility on the architect. Current methods of auditing access for new building are primitive and require the auditor to interpret plans/sections of the proposed building against a checklist of requirements specific to the special need. This paper reports on progress in the use of an immersive VR facility to simulate access to buildings for two broad classes of user: i) those with a mobility impairment ii) those with a visual impairment In the former case, a wheelchair motion platform has been designed which allows the wheelchair user to navigate the virtual building; a brake and motor connected to the rollers on which the wheelchair sits facilitate the effects of slope and surface resistance.
series	other
type	normal paper
email
last changed	2015/02/20 11:24

_id	6348
authors	Schnabel, Marc Aurel and Kvan, Thomas
year	2002
title	Interaction in virtual building space, Distributing Knowledge in Building
source	CIB W78 Conference 2002, Proceedings, Vol. 2, pp91-98, Aarhus School of Architecture, Denmark, 12 –14 June
summary	This paper presents the results from two experiments in working on descriptions of form in immersive virtual environments (IVE). Recently; Virtual Environments (VE) are increasingly used as environments for design and research. Using VE to visualize ideas from the initial steps of design; the architect is challenged to deal with perception of space; solid and void; without translations to and from a two dimensional media. From this new ability; we might expect new forms of design interaction and expression. The goal of our studies was to identify how designers use and communicate early design ideas by using immersive three-dimensional (3D) VEs and how they describe 3D volumes using different media. We set up a series of experiments including navigation- and perception-tasks; designing in IVE; transcription of design; remote communication between design partners and controlled observations. We explored initial intentions of 3D-immersive design schemes; textual descriptions and collaborations within IVE. This paper describes the outcome of creation; interpretation and communication of architectural design; by using an Immersive Joint Design Studio; as well as the description and translation of a 3D cubic structure. We discuss frameworks and factors influencing how architectural students communicate their proposals in an immersive Virtual Environment Design Studio (VeDS) and how this approach of design studio enables to understand volumes and spatial relationships.
keywords	Virtual Environment; Remote Collaboration; Design Evaluation; Spatial Understanding
series	other
email
last changed	2002/11/15 18:29

_id	730e
authors	Af Klercker, Jonas
year	1997
title	Implementation of IT and CAD - what can Architect schools do?
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 83-92
summary	In Sweden representatives from the Construction industry have put forward a research and development program called: "IT-Bygg 2002 -Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. A seminar was held with some of the most experienced researchers, developers and practitioners of CAD in construction in Sweden. The activities were recorded and annotated, analysed and put together afterwards; then presented to the participants to agree on. Co-operation is the key to get to the goals - IT and CAD are just the means to improve it. Co-operation in a phase of implementation is enough problematic without the technical difficulties in using computer programs created by the computer industry primarily for commercial reasons. The suggestion is that cooperation between software companies within Sweden will make a greater market to share than the sum of all individual efforts. In the short term, 2 - 5 years, implementation of CAD and IT will demand a large amount of educational efforts from all actors in the construction process. In the process of today the architect is looked upon as a natural coordinator of the design phase. In the integrated process the architect's methods and knowledge are central and must be spread to other categories of actors - what a challenge! At least in Sweden the number of researchers and educators in CAAD is easily counted. How do we make the most of it?
series	AVOCAAD
last changed	2005/09/09 10:48

_id	12e3
authors	Ahmad Rafi, M.E., Che Zulkhairi, A. and Karboulonis, P.
year	2002
title	Interactive Storytelling and Its Role in the Design Process
doi	https://doi.org/10.52842/conf.caadria.2002.151
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 151-158
summary	Projects of ever increasing complexity and size have incited the need for new and robust design methodologies and tools in an effort to manage complexity, lower costs, ascertain quality and reduce risk. Technology convergence through the growing availability of networked computers, rapid progress in Computer Aided Design (CAD) and information management have encouraged the undertaking of even more complex designs that demand high degrees of interaction, collaboration and the efficient sharing and dissemination of information. It is suggested that interactive storytelling and interactive design (Rafi and Karboulonis, 2001) techniques that use non-linear information mapping systems can be deployed to assist users as they navigate information that is structured to address localized needs as they arise. The design process is a collaborative effort that encompasses diverse knowledge disciplines and demands the management and utilization of available resources to satisfy the needs of a single or set of goals. It is thought that building industry specialists should work close together in an organised manner to solve design problems as they emerge and find alternatives when designs fall short. The design process involves the processing of dynamic and complex information, that can be anything from the amount of soil required to level lands - to the needs of specific lightings systems in operation theatres. Other important factors that affect the design process are related to costs and deadlines. This paper will demonstrate some of our early findings in several experiments to establish nonlinear storytelling. It will conclude with a recommendation for a plausible design of such a system based on experimental work that is currently being conducted and is reaching its final stages. The paper will lay the foundations of a possible path to implementation based on the concept of multi-path animation that is appropriate for structuring the design process as used in the building industry.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	7798
authors	Barrow, Larry
year	2002
title	Elitism, IT and the Modern Architect Opportunity or Dilemma
doi	https://doi.org/10.52842/conf.acadia.2002.097
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 97-109
summary	Information Technology (IT) is impacting architecture dramatically in process and form. Often thecurrent transformation of architecture is difficult to analyze and frequently we see confusion and anxietyregarding uncertainties for the future of the architect as designer and project leader. The currentpotentiality for new exotic form (i.e. product) is mesmerizing; however, in the current context, lessobvious issues and pertinent questions are emerging for the profession. What is the mission of theprofession? What will keep us relevant in the mist of the new global society?In this paper, we will take an evolutionary perspective of technology in architecture and draw parallelsbetween the Renaissance, which is the genesis of the modern architect, and the contemporary state ofarchitecture. The modern architect was birthed during the Renaissance where we see the retraction ofthe architect from the building site and separation from direct involvement in the building process.Communications technology (i.e. representation in the form of free-hand drawings, mechanical 2Dorthographic drawings and 3D perspectives) enabled the decomposition of the master builder into threecomponents (i.e. artist-designer, practicing_architect, and builder). Thus, we see technology enable thedenigration and ultimate dissolution of the centuries old craftsman guilds and the master builder. Thetechnology evolution of “drawings” enabled monumental change in the process of architecture over thepast five hundred years. The fission of the master builder, enabled by “drawings”, resulted in disparatefactions which are the forerunners of the modern day litigious design-bid-build project delivery. We nowincreasingly see a return to the fusion of design and building where often the architect is not the projectmanager or leader. Thus, the question looms, will the 21st century architect lead or be led, and whatare the ramifications for the profession?The historical Master Builder is re-emerging as a dynamically networked team of design andconstruction knowledge specialists. Bi-lateral knowledge exchange, enhanced with emerging IT, isoccurring between owners, managers, architects, design specialists, engineers, builders and machines.Technology is disrupting architecture, resulting in increasing specialization and compressed timeframes, and may require reevaluation of the role of the architect as project-leader "integrativegeneralist"or "design-specialist".Conclusively, the concept of ‘cybernetic architecture’ is proposed as an IT reference framework. Failureto appropriately respond to societal evolution, driven by technology, could result in the loss ofprofessional status for the modern architect. Herein lies our dilemma, or opportunity, depending on therole choice of the modern architect.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ddssar0211
id	ddssar0211
authors	Fröst, Peter
year	2002
title	Interactive Tools for Collaborative Architectural Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Today’s rapidly changing society is continuously developing towards an increased demand for multistakeholder knowledge and influence in the architectural planning and design process. Accordingly, we are working with developing and setting up a partner engaged collaborative design process. It includes active collaboration between users, external partners and designers, and visualizations in conceptual design and scenario building. My research is focusing on integrating visualization technology in theseprocesses by application of digital tools. We have developed a working prototype for an interactive design tool. The prototype is an extremely “easy to use” digital modeling tool called “ForeSite Designer.” With this tool one builds one’s own spatial environment with elements on a 2D surface.With one command the 2D layout is exported to a lit-up 3D/Virtual Reality world in the computer game “Half-Life”. ForeSite Designer has lately been used in a series of workshops together with external users. In these processes ForeSite Designer has played a crucial role as an arena of building spatially arranged concepts of future environments. The results show that it works, and, importantly, promotes a collaborative engagement among the users.
series	DDSS
last changed	2003/08/07 16:36

_id	24d4
authors	Gaete, Marcela and Pardow, Irene
year	2002
title	Diseño de Interfase - Metodología de acercamiento a la construcción de entornos virtuales [Interphase Design - Methodology of Approach to the building of Virtual Environments]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 175-179
summary	The project we are presenting is based on our professional experience in virtual interface design of multimedia, in CD-ROM and Web format, which has been developed in our design workshops. Our project methodology has one common basis: The metaphorical and conceptual argument for the creation of virtual environments is supported by the observation of the physical environment of human beings and the objects that surround them.The research we have carried out is aimed at establishing a project methodology for interface design based on the hypothesis that observation and knowledge of the relationship between man and environment (architectural and urban), man and object (literacy and symbolic representation) is the basis for the design of recognizable virtual environments. These are functional, representative and efficient elements for the achievement of communicative objectives of such virtual environments. The project reference that supports our research is the outcome of academic and professional project analysis. These projectswill support the demonstration of the suggested methodology which, in the course of the presentation, will be applied to a project to be developed and whose metaphorical basis is the city of Valparaiso.The objective is to use the urban environment as a metaphorical argument for the design of a virtual environment for the Cultural and Historical Registry of Literature, Plastic Arts and Chilean Architecture where Valparaiso has served as reference, source of inspiration and object of study. Together with the methodological project, we will present the instruments that have been created for reference analyis with the purpose of interface design and in order to facilitate a mechanism to evaluate interface design projects.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	c839
authors	Hwang, Jie-Eun
year	2002
title	SpaceScope: Developing a Spatial Information Retrieval System - Focused on Apartment Unit Floor Plans -
source	Yonsei University, Dept. of Housing & Interior Design
summary	This research investigates the spatial information retrieval (IR) in architecture focused on constructing efficient metadata that is crucial for data retrieval. Generally speaking, metadata is ‘structured data about data’ to describe resources especially in a digital format. In this research, metadata is a sort of data object to be useful in searching spatial information. Metadata is also used to describe raw spatial data object as not only attribute data but also content structurally and semantic ally. There are two issues that motivate this research; 1) what is the spatial information – that materializes the intangible space as a data object, and 2) how we can search the information efficiently – the content-based information retrieval. Although knowledge of a building’s spatial content is most important in architecture, there has been no logical method to manage it. From the viewpoint of content-based retrieval, the researcher analyzes spatial information of a floor plan, with a focus on the apartment unit floor plan common in Korea. Then the metadata items are extracted in a structured manner. To manage the items efficiently, the researcher develops a data model for spatial information according to the concept of the “Structured Floor Plan”. The main object of content to retrieve is a spatial network that consists of nodes of spaces and their linkages. There are two ways to organize the metadata: the traditional index files and the RDF (Resource Description Framework). While the index files are still efficient with computability, the RDF applies greater options to retrieve, such as fuzzy predicates, semantic predicates, and so on. To exploit the metadata, this research shows several possibilities of query operations that present a set of sample queries about L-DK(Living room – Dining room – Kitchen). Implementation of the prototype system is divided into three parts: 1) a modeling module using Vitruvius; 2) an indexing module using MS SQL Server? 2000 in conjunction XML; and 3) a browsing module using the SpaceScope browser. The future works may consider XML-based databases and a knowledge based query language, such as RQL/XQL, working on such databases. The more specific domain knowledge is involved, the more practical systems would be. Even in architecture, there may be a diverse range of domain knowledge, such as design, building performance, facility management, energy management, post occupied evaluation, historical research, and so on. Also the issue of interface should be investigated in depth, so that it will be adequate to the needs of the architectural field.
keywords	Content-based Information Retrieval; Metadata; RDF; XML; Spatial Information; Apartment Floor Plan; Semantics
series	thesis:MSc
email
last changed	2003/04/25 07:27

_id	120eaea2001
id	120eaea2001
authors	Martens, Bob
year	2002
title	Endoscopic Model-viewing of Students‘ Design Project: An Evaluation
source	Environmental Simulation - New Impulses in Planning Processes [Proceedings of the 5th European Architectural Endoscopy Association Conference / ISBN 3-922602-85-1]
summary	Students at Vienna University of Technology can avail themselves (free of charge) of viewing their design projects by means of endoscope. While doing so basic knowledge on the endoscopic rendering technique is furnished, not only resulting in considerations regarding possibilities and limitations of endoscopic infrastructure, but also sounding out the conditions that prove suited already throughout the stage of model-building. Architectural-related endoscopy actually also aims at destruction-free model viewing. This contribution enumerates specific experience based on a user-inquiry regarding performed rendering situations throughout the last three years. Two diploma theses are dealt with in more detail in this context, i.e.: the re-design of the Railway Station Vienna-Praterstern and the new building of the Archeological Museum at Nicosia.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	ddssar0225
id	ddssar0225
authors	Ozsariyildiz, S.S., Sariyildiz, I.S. and Stouffs, R.
year	2002
title	ICKT support for the Building Industry: A Virtual Partner
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	We are now at a stage in which ICKT techniques allows us to develop knowledge intensive systems, such as intelligent decision support systems, to support collaboration and cooperation. This paper describes a theoretical approach, in which collaborative agents take on the role as a partner during the decision making process, in order to support various actors in the building process. The group-decision making set-up will be discussed and we will give an overview on the state of art of this subject. We will give some insights into their application in the building practice. In addition, we will provide some examples of use-case-scenarios as inception and early design support and evaluate it.
series	DDSS
last changed	2003/08/07 16:36

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddssar0220
id	ddssar0220
authors	Van Leeuwen, Jos P.
year	2002
title	Knowledge Sharing for Collaborative Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	This paper presents the preliminary results of a research project that aims to develop and apply Design Knowledge Servers (DesKs) in the building and construction industry. The paper starts with a view on where the development of computer application in design and construction might be heading. It briefly looks at the current situation concerning information modelling for design support and compares two alternative ways of developing standards in this area. After this sketch of its context, the DesKs project is introduced and its objectives, characteristics, implementations issues, and application scenarios are discussed. The paper concludes with a preview of the next steps we will attempt to take and with an explanation of why it all takes so long.
series	DDSS
last changed	2003/08/07 16:36

_id	acadia23_v3_87
id	acadia23_v3_87
authors	Velikov, Kathy
year	2023
title	Society Award for Leadership
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	What produces this sense of aliveness as proposed by the authors of the book ""Cultivating Communities of Practice"" (Wenger et al., 2002, chap. 3), are design principles, which are intentional and strategic. These are activities and practices that have the underspecified goals to enable a community to develop, to maintain the fluidity of its boundaries, to enable differing levels of participation, to orchestrate group events and encourage interpersonal webs of relationships, to provide value to its members, to be simultaneously familiar and exciting, and to find the right rhythm of activities. ACADIA is simultaneously a formalized organization, as well as a community of practice, that embodies that very sense of “aliveness.” This has been produced not only because ACADIA has incorporated many of the principles that are characteristic of thriving groups, but primarily because of the people involved in producing, reproducing, and building anew that which we call ACADIA. The members of this community generously bring their curiosity, excitement, knowledge, and their willingness to share to each gathering and to ACADIA’s activities. This, for me, is what I most deeply value about ACADIA—the colleagues, friends, collaborators, role models, and agitators—whose conversations, debates, and collaborations nourish and inspire my work, who challenge me to continually think about our work in new ways, and who help me think about work that we should produce together.
series	ACADIA
type	award
email
last changed	2024/04/17 13:59

_id	1083
authors	Wu, Rui
year	2002
title	Computer Aided Dimensional Control in Building Construction
source	Eindhoven University of Technology
summary	Dimensional control in the building industry can be defined as the operational techniques and activities that are necessary, during the construction process of a building, for the assurance of the defined dimension quality of a building (Hoof, 1986). Efficient and precise dimensional control of buildings under construction is becoming ever more important because of changes in the construction industry. More prefabricated components are used; more regulations appear; newly designed buildings have more complex shapes, and building construction is speeding up. To ensure the predefined dimensional quality, a plan of dimensional control must be designed, on the basis of building drawings and specifications delivered by architects, before the building is constructed. The dimensional control plan must provide site personnel with adequate information on, among others, setting out and assembling building components, which can often be done by means of Total Stations. The essence of designing a dimensional control plan is to find out which points should be used as positioning points, which points should be set out in advance or controlled afterwards, and not to forget why. In an effort to contribute to the improvement of the dimensional control of on-site construction projects, this research tries to capture the knowledge required to design an adequate dimensional control plan and make that knowledge more generally available, and build a digital connection between CAD systems and Total Stations, focusing on prefabricated concrete building structural elements. The instrument developed in this research for capturing of essential dimensional control information and knowledge makes use of Product Data Technology (PDT) and Knowledge Technology (KT). The chosen solution supports the stochastic analysis of optimal positioning points taking account of various sorts of deviations and their mutual relationships. The resulting information model has been written in a standardized information modelling language called UML (Unified Modelling Language). The model has been implemented in a Dimensional Control System (DCS) and applied in the “La Tour” construction project in Apeldoorn, the Netherlands. The DCS provides a digital way to bridge the floor plan design with dimensional control, predict dimensional deviation limits and output the data needed for a Total Station. The case study of “La Tour” tests the UML model and prototype of the DCS. The results prove that direct positioning of objects (by putting reflectors on the objects and using a Total Station and by inputting coordinates extracted and calculated from the AutoCAD drawings) provides higher speed, accuracy and reliability. It also shows a way to (pre)position free form objects in 3D where traditional methods cannot. In conclusion: (1) it seems to be justified to expect that the application of the DCS will contribute to increased confidence in dimensional control and the reduction of costs of failure, which potentially could support the increased use of cheaper construction methods, and will also contribute to the improvement of building design and construction process. (2) the scientific contribution of this research is a first step towards providing dimensional quality in a construction process covered by stochastic dimensional uncertainty, even for positioning of free form objects.
keywords	Construction Management; Constructional Engineering; Computer Applications
series	thesis:PhD
last changed	2003/02/12 22:37

_id	ga0234
id	ga0234
authors	Yingfei, W., Mingxi, T., Frazer, J.H., Shouqian, S. and Yunhe, P.
year	2002
title	A collaborative platform supporting graphic pattern design and reuse of design knowledge
source	International Conference on Generative Art
summary	A pattern generation system based on an object-oriented pattern knowledge representation method developed previously in Zhejiang University is introduced. We evaluate the effectiveness of this system from authors’ current new research perspective in the Design Technology Research Centre of the Hong Kong Polytechnic University. We then put forward a new platform model to support graphical pattern design emphasising ethnic minority culture. The purpose of building this new platform is to increase the ability of the system in supporting collaborative design. New methods are developed for representing patterns as well as the knowledge about how they can be reused in design applications. In this paper the method for element dynamic classification, knowledge representation of pattern design and the system architecture are introduced.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	8183
authors	Lahti, J., Alavalkama, I. and Häikiöv, J.
year	2002
title	Representing and distributing 3D-content in webbased architectural design education - Evaluating 3D-presentation methods for e-learning
doi	https://doi.org/10.52842/conf.ecaade.2002.096
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 96-104
summary	As information telecommunication technology develops, teaching at universities changes. E-learning and working on-line create new challenges for the development of architectural education. Education of architecture contains special challenges. With new presentation technologies ideas and objects can be presented graphically in 3- dimensions on the e-learning environment. In a research project the Architectural Media Laboratory (AML) at the Tampere University of Technology (TUT) has studied the use of different techniques utilizing computer modelling and photography-based methods in presenting and teaching architecture.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ga0227
id	ga0227
authors	Rafi, Ahmad
year	2002
title	Creative Multimedia: The Commodity of the 21st Century
source	International Conference on Generative Art
summary	The Digital Revolution has turned individuals, institutions, and businesses into a new form of collective wealth and prosperity. This revolution has effected a creativity burst that goes far beyond an increase in the number of those involved in design tasks and challenges, in both professional and amateur settings. The Internet in particular are not only distributing media but most importantly it is a reference platform in which ideas, talents and capabilities emerge and are refined, enhanced and perfected through the inspiring interplay of collaboration and competition. This paper briefly examines the relationship between art and science through the ages, discusses their recent re-convergence, and examines their current relationship via real world applications and productions. The study of such productions, their successes and the impact they have had in the marketplace based on designs and aesthetics instead of advanced technology appear to support the argument. It also highlights the need for accelerating this process and suggests that the re-convergence is a result of new technologies adopted by practitioners that include the effective visualisation and communication of ideas and concepts. These elements are widely found today in multimedia, which offers increased power and new abilities to both scientists and designers. This paper also highlights the need for the employment of emerging computer-based interactive technologies which will enhance the design process, better decision-making, increase the quality of communication and collaboration, lessen the errors and reduce the design cycles. A Multimedia Palette is proposed as a design platform to expose one's imagination, creative and innovative ideas, and provide a richer and more creative multimedia content design and development. Following encouraging first round results, an expanded version of the suggested platform has been experimented in the Faculty of Creative Multimedia, Multimedia University for the last 5 years, in integrating design and computer skills in the teaching and learning projects.
keywords	creativity, re-convergence, Multimedia Palette, Creative Multimedia
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

For more results click below: