Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 324

Reformat results as: short short into frame detailed detailed into frame

_id	acadia17_202
id	acadia17_202
authors	Cupkova, Dana; Promoppatum, Patcharapit
year	2017
title	Modulating Thermal Mass Behavior Through Surface Figuration
doi	https://doi.org/10.52842/conf.acadia.2017.202
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 202-211
summary	This research builds upon a previous body of work focused on the relationship between surface geometry and heat transfer coefficients in thermal mass passive systems. It argues for the design of passive systems with higher fidelity to multivariable space between performance and perception. Rooted in the combination of form and matter, the intention is to instrumentalize design principles for the choreography of thermal gradients between buildings and their environment from experiential, spatial and topological perspectives (Figure 1). Our work is built upon the premise that complex geometries can be used to improve both the aesthetic and thermodynamic performance of passive building systems (Cupkova and Azel 2015) by actuating thermal performance through geometric parameters primarily due to convection. Currently, the engineering-oriented approach to the design of thermal mass relies on averaged thermal calculations (Holman 2002), which do not adequately describe the nuanced differences that can be produced by complex three-dimensional geometries of passive thermal mass systems. Using a combination of computational fluid dynamic simulations with physically measured data, we investigate the relationship of heat transfer coefficients related to parameters of surface geometry. Our measured results suggest that we can deliberately and significantly delay heat absorption re-radiation purely by changing the geometric surface pattern over the same thermal mass. The goal of this work is to offer designers a more robust rule set for understanding approximate thermal lag behaviors of complex geometric systems, with a focus on the design of geometric properties rather than complex thermal calculations.
keywords	design methods; information processing; physics; smart materials
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ddssar0216
id	ddssar0216
authors	Jones, Dennis B.
year	2002
title	The Quantum Matrix:A Three Dimensional Data Integration and Collaboration ToolFor Virtual Environments
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	If a picture is worth a thousand words, what if they could walk and talk? How would you like to bring a whole new dimension to your ideas; to use visualization to convey a sense of time and motion, to use imagery to give your ideas vividness; to use sound to give them voice and view them threedimensionally. The Matrix allows you to do all of this and much more. The Matrix resembles Rubik’s cube, but its purpose is to store, manage and access data of all types and to view them in three dimensions in virtual environments such as the CAVE and on your desktop. The current version can store, access and view almost anything that is in digital form, including:Text files Pictures Video Clips Sound Files Spreadsheets URL’s HTML pages Databases CAD drawings Gantt Charts Business Graphics VRML modelsExecutable Programs OLE (Object Link & Embedded) The Matrix is a three-dimensional multimedia and document management tool. The Matrix anticipates the convergence of electronic media into one consistent environment for analysis and representation. the Matrix uses VMRL and OpenGL technologies to allow the user to be immersed in their data as withCinerama, IMAX and Virtual Reality Environments. The Matrix allows the user to exercise their creativity by interactively placing and organizing their data three dimensionally and navigating through and viewingdata and documents in 3D (monocular and binocular – stereo). The Matrix user interface is simple to use. Employing the now familiar “drag and drop” method to manage data and documents. Items can be placed into the matrix grid at a user selected matrix cube location. Upon dropping a document on a cube it appears as a mapped image onto the surface. Navigating through the 3D Matrix-space is fun. All navigation uses real-time animation giving you instant feed back as to where you are. Data drilling is as simple as mouse click on a Matrix cube. Double clicking the on an object in the matrix activates that object. Data dreams was an image that preexisted the program by several years. The dream was to create a new way oforganizing and exploring data. The Qube image was created using Microstation by Bentley Systems, Inc. The figure was modeled using Poser by MetaCreations and composited using Adobe Photoshop.
series	DDSS
last changed	2003/08/07 16:36

_id	6348
authors	Schnabel, Marc Aurel and Kvan, Thomas
year	2002
title	Interaction in virtual building space, Distributing Knowledge in Building
source	CIB W78 Conference 2002, Proceedings, Vol. 2, pp91-98, Aarhus School of Architecture, Denmark, 12 –14 June
summary	This paper presents the results from two experiments in working on descriptions of form in immersive virtual environments (IVE). Recently; Virtual Environments (VE) are increasingly used as environments for design and research. Using VE to visualize ideas from the initial steps of design; the architect is challenged to deal with perception of space; solid and void; without translations to and from a two dimensional media. From this new ability; we might expect new forms of design interaction and expression. The goal of our studies was to identify how designers use and communicate early design ideas by using immersive three-dimensional (3D) VEs and how they describe 3D volumes using different media. We set up a series of experiments including navigation- and perception-tasks; designing in IVE; transcription of design; remote communication between design partners and controlled observations. We explored initial intentions of 3D-immersive design schemes; textual descriptions and collaborations within IVE. This paper describes the outcome of creation; interpretation and communication of architectural design; by using an Immersive Joint Design Studio; as well as the description and translation of a 3D cubic structure. We discuss frameworks and factors influencing how architectural students communicate their proposals in an immersive Virtual Environment Design Studio (VeDS) and how this approach of design studio enables to understand volumes and spatial relationships.
keywords	Virtual Environment; Remote Collaboration; Design Evaluation; Spatial Understanding
series	other
email
last changed	2002/11/15 18:29

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

_id	aef6
authors	Chang, David C. and Szalapaj, Peter
year	2002
title	Making Sense of Presenting Design Ideas through Animated Form
doi	https://doi.org/10.52842/conf.ecaade.2002.560
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 560-563
summary	This paper describes both conventional and computational ways of expressing and exploring design concepts with the use of models. We explain the role and function of the model in the design process, and investigate the ways in which models become reflections and representations of architects’ design thinking. We compare and contrast the physical properties of conventional models with those of three-dimensional computer models, and the corresponding processes of model creation, model development, and model modification. The paper includes a brief overview of commonly used forms of computer representations often encountered in Computer Aided Design applications. Whatever the visual richness of computer models in virtual environments can be, we believe that, just as in the use of conventional two-dimensional architectural drawings, computational presentations of architectural design concepts have their own conventions of use. This paper addresses the need to more accurately understand these conventions of using computer models for the representation of architectural design concepts. Therefore, we will illustrate the more dynamic qualities of computer models, which have the potential to allow designers to escape from the restrictions and constraints of physical form. In particular, we demonstrate these qualities in the context of architectural presentations in the medium of computer animation. These new forms of expression of design thoughts and ideas go beyond mere model making, and move more towards scenemaking and storytelling. The latter represents new methods of expression within computational environments for architects and designers.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	1a42
authors	Fjeld, M., Lauche, K., Bichsel, M., Voorhorst, F., Krueger, H., Rauterberg, M.
year	2002
title	Physical and Virtual Tools: Activity Theory Applied to the Design of Groupware
source	Computer Supported Cooperative Work (CSCW), Kluwer
summary	Activity theory is based on the concept of tools mediating between subjects and objects. In this theory, an individual's creative interaction with his or her surroundings can result in the production of tools. When an individual's mental processes are exteriorized in the form of tools - termed objectification - they become more accessible to other people and are therefore useful for social interaction. This paper shows how our understanding of activity theory has shaped our design philosophy for groupware and how we have applied it. Our design philosophy and practice is exemplified by a description of the BUILD-IT system. This is an Augmented Reality system we developed to enhance group work; it is a kind of graspable groupware which supports cooperative planning. The system allows a group of people, co-located around a table, to interact, by means of physical bricks, with models in a virtual three-dimensional (3D) setting. Guided by task analysis, a set of specific tools for different 3D planning and configuration tasks was implemented as part of this system. We investigate both physical and virtual tools. These tools allow users to adjust model height, viewpoint, and scale of the virtual setting. Finally, our design practice is summarized in a set of design guidelines. Based on these guidelines, we reflect on our own design practice and the usefulness of activity theory for design.
series	other
last changed	2003/04/23 15:50

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ed3c
authors	Kuenstle, Michael W.
year	2002
title	Escarpment Study in a Virtual Flow Environment: A Comparative Analysis of a Single Building Type Modeled in Varying Topological Situations
doi	https://doi.org/10.52842/conf.acadia.2002.239
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 239-247
summary	This paper documents the progress of research to investigate the integration of 3-dimensionalcomputational modeling techniques into wind mitigation analysis and design for building structureslocated in high wind prone areas. Some of the basic mechanics and theoretical concepts of fluid flowand wind pressure as well as their translation into design criteria for structural analysis and design arereviewed, followed by a discussion of a detailed Computational Fluid Dynamics (CFD) application casestudy for a simulated "3-second gust" hurricane force wind flow over a low rectangular building locatedin a coastal region of south Florida. The case study project models the wind flow behavior and pressuredistribution over the building structure when situated in three varying conditions within a single terrainexposure category. The simulations include three-dimensional modeling of the building type constructed(1) on-grade in a flat coastal area, (2) above grade with the building elevated on structural columns, and(3) on-grade downwind of an escarpment. The techniques and parameters for development of thesimulations are discussed and some preliminary interpretations of the results are evaluated bycomparing their predictions to existing experimental and analytical data, with special attention paid tothe numerical methods outlined in the American Society of Civil Engineers, Minimum Design Loads forBuildings and Other Structures, ASCE 7-98.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	24ff
authors	Mark, Earl and Aish, Robert
year	2002
title	Exploring New Pathways Between Physical and Virtual Models - The Vaults at Fountains Abbey
doi	https://doi.org/10.52842/conf.ecaade.2002.464
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 464-470
summary	The first generations of computer aided design systems were largely characterized by geometrical modeling software that could, in some applications, generate physical output in the form of computer aided manufacturing. More recently the technology has expanded to include a variety of ways to reverse direction, such that physical objects are captured and translated into computer graphics geometrical models. Laser surveying methods that produce point clouds are among the newer technologies that make this possible. The interpretation of the point clouds and translation of them into a computer graphics three-dimensional model can be subject to various mediation processes. This paper reports on a translation environment that interprets the point clouds so as to not just replicate the physical world, but rather encapsulates it towards the refinement and realization of geometry design objectives. A case study of Fountains Abbey, a Cistercian Abbey in the United Kingdom, serves as the basis for experimentation and control of surface geometry.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	e721
authors	Nitsche, Michael and Roudavski, Stanislav
year	2002
title	Building Cuthbert Hall Virtual College as a Dramatically Engaging Environment
source	PDC 02 - Proceedings of Participatory Design conference, T. Binder, J. Gregory, I. Wagner (eds.), Malmö. Sweden, 23-25 June 2002 [ISBN 0-9667818-2-1]
summary	This paper outlines the interdisciplinary nature, collaborative work patterns and role of aesthetics in the Cuthbert Hall Virtual College research project at the Cambridge University Moving Image Studio (CUMIS) and the Centre for Applied Research in Education Technology (CARET). The project identifies key properties of dramatically engaging real-time three-dimensional virtual environments (RT 3D VE) and how the holistic experiential phenomenon of place is organised and mediated through spatial narrative patterns. Interdisciplinary by nature, the project requires a collaborative approach between science, engineering, media and architecture, and the results are revealing for all these areas. The Cuthbert Hall project invites discussion of the importance in the creation and use of RT 3D VE's - under single and multi-user conditions - of articulate aesthetics (the quality of architectural, visual and audio design; the production and incorporation of dramatic properties) and of the conditions required for collaborative, communicative use of the environment. The full theoretical and technical discussions as well as the evaluation results are outside the scope of this submission.
keywords	Real-time virtual environment, Computer Game, Place, Mediation, Expressive space
series	other
email
last changed	2003/02/09 16:03

_id	0e4c
authors	Uddin, M. Saleh and Yoon, So-Yeon
year	2002
title	Peter Eisenman’s House X, Scheme G: 3D Game Engine for Portable Virtual Representation of Architecture
doi	https://doi.org/10.52842/conf.ecaade.2002.526
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 526-531
summary	Recently introduced 3D games, game editors, along with gaming software offer great potential for delivering three-dimensional, collaborative virtual environments for online audiences. These capabilities have significant potential in architectural visualization. The University of Missouri-Columbia’s Emerging Technology Group developed the Virtual Campus Project introducing the university campus to prospective students through the Internet. Fascinating quality, seamless real time rendering, and smooth navigation are enough to impress visitors. However, the developers had to use eye measures and guesses based on photos rather than architectural drawings for initial 3D computer models. The absence of a precise scaling system as well as not being able to recognize a standard 3D architectural drawing format in a virtual environment were the prime generators of this paper. One important goal for this paper is to suggest architects the potentials of using universal or exchangeable formats of 3D models with accurate structure data to build virtual models. A second goal is to provide better understanding of potentials in 3D game engines for virtual representation of architecture.
series	eCAADe
email
last changed	2022/06/07 07:57

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ga0226
id	ga0226
authors	Liu, X., Frazer, Jh. and Tang, M.X.
year	2002
title	A generative design system based on evolutionary and mathematical functions
source	International Conference on Generative Art
summary	Previous work by Professor John Frazer on Evolutionary Architecture provides a basis for the development of a system evolving architectural envelopes in a generic and abstract manner. Recent research by the authors has focused on the implementation of a virtual environment for the automatic generation and exploration of complex forms and architectural envelopes based on solid modelling techniques and the integration of evolutionary algorithms, enhanced computational and mathematical models. Abstract data types are introduced for genotypes in a genetic algorithm order to develop complex models using generative and evolutionary computing techniques. Multi-objective optimisation techniques are employed for defining the fitness function in the evaluation process.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	073c
authors	Papamichael, Kostas and Pal, Vineeta
year	2002
title	Bridging the Gap Between Building Science and Designing Studios
doi	https://doi.org/10.52842/conf.caadria.2002.123
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 123-130
summary	Design studios and building science courses have been conducted independent of each other, mainly due to a lack of tools that allow quick and easy consideration of building science criteria, such as comfort and energy requirements, during the design process. Existing tools are not user-friendly and their use requires significant effort in gaining familiarity with the input requirements, understanding the modeling assumptions and interpreting the output. This paper is about the Building Design Advisor (BDA), an evolving computer-based tool intended to bridge the gap between design studios and building science considerations by addressing the above-mentioned limitations of existing tools. BDA allows automatic preparation of input files to multiple simulation tools while the user is working in a CAD environment. BDA automatically activates the relevant simulation tools when the user selects performance parameters to be computed and provides the results in a graphical form, allowing comparison of multiple design options with respect to multiple performance criteria. The paper includes considerations for the use of the BDA in the design studio and ends with a description of the current development efforts and future plans.
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ga0233
id	ga0233
authors	Sheridan, J.
year	2002
title	The Evolving Role of the Artist
source	International Conference on Generative Art
summary	For more than a decade the author has designed and used algorithmic systems to produce artworks that incorporate generative and evolutionary concepts, forms and processes. This work has demonstrated that algorithmic aesthetic processes and products can be effectively created and modulated by both human beings and non-human systems. However, this work has also raised important questions such as: - What role can the individual human artist play in a cultural economy based upon industrialized generative processes and non-human systems? - How can artists integrate standardized scientific languages and algorithmic processes into personal visions and expressive languages? - How can artists capture their personal creative processes and encapsulate these processes in industry standard systems and software; and should they do so? - How might the generative systems and products created by human and non-human artists function and evolve in the larger social context? To address these questions, in this paper the author uses examples taken from his past and present artwork to illustrate the opportunities and pitfalls presented by computerized generative aesthetic processes and tools. In addition, the author offers a set of conjectures intended to help clarify issues such as: the evolving role of the artist as a producer of knowledge and form, and the value and appropriate structure of personalized computer languages for artists.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	11fc
authors	Tang, S.K., Liu, Y.T., Fan, Y.C., Wu, Y.L., Lu, H.Y., Lim, C.K., Hung, L.Y. and Chen, Y.J.
year	2002
title	How to Simulate and Realise a Disappeared City and City Life? - A VR Cave Simulation
doi	https://doi.org/10.52842/conf.caadria.2002.301
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 301-308
summary	Computer simulation is used well in historical architecture restoration and research in a small scale for a long time, and should be used in a larger scale to represent a city, especially a disappeared city. Therefore how to utilize computers to coordinate both architectural and cultural data of a city becomes an important issue. This study takes Chang-an City that existed 1400 years ago but disappeared now as example and tries to develop a computerized and visualized method to simulate and realize a disappeared city and it’s life. Finally, we represent simulations in a virtual reality cave (VR Cave) to make navigators evolving in and interacting with the virtual Chang-An City.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ddssar0202
id	ddssar0202
authors	Akin, Ömer and Özkaya, Ipek
year	2002
title	Models of Design Requirement
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Case studies show that significant proportions of design errors and failures are linked to poor requirement specification during both early stages of design and as changes occur. Computational requirements engineering as a front-end to design iterations is a promising area addressing theseproblems. In other design disciplines, such as in software engineering, requirement engineering has given significant product improvements. In this paper, we present a state-space representation of requirement models for architectural design. The purpose of requirement modeling in design is tocreate a process by which requirements can be converted into working design solutions through frontend validation. We suggest three models of requirement specification, co-evolutionary [CoM], multiple domain [MDM] and single domain [SDM] models, that can facilitate this effort. Taken together all three models provide a full set of logical permutations of requirement-solution “worlds” and “operations.” We compare each model against the others in terms of facilitating change management and computability.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssup0202
id	ddssup0202
authors	Antoni, J.P.
year	2002
title	Urban Sprawl Modelling: Combining Models to Make Decision
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	Urban sprawl is frequently associated with the idea of an unsuitable development, leading to increasing economic, social and environmental problems. Moreover, its control is difficult because multiple patterns (concerning numerous traditional urban planning fields) overlap. In order to understand the sprawl process and to manage its consequences, it must be simplified. The construction of a decision making tool appears then interesting. The GIS-based tool presented here is being developed incollaboration between the urban planning agency of Belfort and the laboratory of geography of Strasbourg. It requires three steps: 1. quantification of the sprawl (how much areas are involved in theurban sprawl process?); 2. location of the sprawl (where are the areas defined in the first step?); 3. differentiation of the sprawl (what are the areas located in the second step?). Of course, the successionof the three stages makes the use of the complete model more complex. So, a global ergonomic user interface is being developed within the GIS, allowing to modify each parameter and to play easily numerous simulations.
series	DDSS
last changed	2003/11/21 15:15

For more results click below: