Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 515

Reformat results as: short short into frame detailed detailed into frame

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	7400
authors	Rizal, H. and Ahmad Rafi, M.E.
year	2002
title	The Impact of Internet Enabled Computer Aided Design (iCAD) in Construction Industry
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 085-92
doi	https://doi.org/10.52842/conf.caadria.2002.085
summary	The advent of the Internet has opened up and given, particularly, the developing countries and the world in general, a transformation into collective intelligence (Levy, 1998) societies linked to digital communication (Rafi, 2001). Apart from large corporations, the rapid evolution of border-less communication has also synergise between the art and science expertise to form low-cost internet-based networks that have become multi-million dollar companies within a short period of time (e.g. Linux) (Rafi, 2001). In the context of architectural designs and construction industries, the birth of Internet-based CAD (iCAD) solutions has offered a new dimension to architectural practice. The function of CAD has expanded as a tool to communicate and collaborate as well as to better control all phases of the architectural practices. This paper will review the current available iCAD tools and explore the possible utilisation of iCAD in architectural practices. The opportunities for modifying current professional practice standards to best use iCAD will be rationalised as well as the elements in ensuring the effectiveness of iCAD implementation. The final component of the paper will be an evaluation framework to measure the value of iCAD in an architectural practice. The framework will become an early platform for an architectural practice to decide and plan their future in utilising and applying iCAD in the most efficient way.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	9f9c
authors	Hu, Xiaochun
year	2002
title	An Information-based Framework for Composites Design
source	Drexel University
summary	The heterogeneity of composites determines that composite materials can be engineered to better satisfy a specific design requirement. The main problems that have hindered the application of composites are the need for the material and manufacturing design to be conducted simultaneously, the involvement of a large number of design factors, the difficulty in the characterization of composites, and the inherent repetition of the design process. Considering these problems, this thesis presents an information-based framework for composites design. This research consists of four main aspects: (1) The development of a heterogeneous CAD modeling algorithm and an integrated CAD/CAE method, and their application in a unit cell-based characterization of composite materials with a complex fiber form; (2)The development of a unit cell database for improving the material and manufacturing process design, which covers the design of its database model and the access strategies based on the logic architecture of unit cells and the relationships among elements of unit cells and with the environments; (3)The design of an Information-Based Design Support System (IBDSS) to support the composites design by using the unit cell database, in which the blackboard framework is adopted for the system to organize various computer techniques for different design stages, and to support the design iterating to satisfactory ones incrementally and efficiently, and the data structure of the blackboard, the algorithm to control design iterations, and design procedures for every stage are studied; and (4) The introduction of a ranking-based unit cell evaluation methodology and effective ranking factors for facilitating and improving the composite design process. The approach improves the efficiency of composites design by automating design iterations, supporting composite characterization, alleviating the cost of composite material and manufacturing method design, and assisting in tailored material selection. Case studies are presented to show how the IBDSS is applied to support composites design.
keywords	Mechanical Engineering
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	bcf7
authors	Arvin, Scott A. and House, Donald H.
year	2002
title	Modeling architectural design objectives in physically based space planning
source	Automation in Construction 11 (2) (2002) pp. 213-225
summary	Physically based space planning is a means for automating the conceptual design process by applying the physics of motion to space plan elements. This methodology provides for a responsive design process, which allows a designer to easily make decisions whose consequences immediately propagate throughout the design. It combines the speed of automated design methods with the flexibility of manual design methods, while adding a highly interactive quality and a sense of collaboration with the design itself. In our approach, the designer creates a space plan by specifying and modifying graphic design objectives rather than by directly manipulating primitive geometry. The plan adapts to the changing state of objectives by applying the physics of motion to its elements. For design objectives to affect a physically based space plan, they need to apply appropriate forces to space plan elements. Space planning can be separated into two problems, determining topological properties and determining geometric properties. Design objectives can then be categorized as topological or geometric objectives. Topological objectives influence the location of individual spaces, affecting how one space relates to another. Geometric objectives influence the size and shape of space boundaries, affecting the dimensions of individual walls. This paper focuses on how to model a variety of design objectives for use in a physically based space planning system. We describe how topological objectives, such as adjacency and orientation can be modeled to apply forces to space locations, and how geometric objectives, such as area, proportion, and alignment, can be modeled to apply forces to boundary edges.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ga0206
id	ga0206
authors	Biles, John A.
year	2002
title	GenJam in Transition: from Genetic Jammer to Generative Jammer
source	International Conference on Generative Art
summary	GenJam, short for Genetic Jammer, is an evolutionary computation (EC) based software agent that models a jazz improviser. Recently GenJam has evolved away from its roots as an interactive genetic algorithm toward its current state as an autonomous generative system. GenJam has retained its chromosome-based representations and mappings, its intelligent selection, crossover and mutation operators, and its real-time interactive performance capabilities. However, it no longer needs any explicit representation of fitness, which arguably makes it no longer an EC system. This paper considers GenJam as a generative art system. Generative art produces “unique and non-repeatable events” that express a designer’s generating idea. The designer’s generating idea defines a species of events, represented in a genetic code. In music, these events could be individual notes, melodic phrases, even entire pieces. In GenJam the events are four-measure phrases, or “licks” in the jazz vernacular. The format for the genetic code, then, defines a species space from which unique individual events can be generated. Uniqueness is important in jazz because improvisation must be spontaneous and “new.” Hence, improvisation is tailor-made for the generative art paradigm, and in fact, one could argue that improvisation is, by definition, the purest example of generative art applied to music. In other words, generative music is improvisation, and GenJam is the Generative Jammer.
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:16

_id	e8d7
authors	Cagan, J. Shimada, K. and Yin, S.
year	2002
title	A survey of computational approaches to three-dimensional layout problems
source	Computer-Aided Design, Vol. 34 (8) (2002) pp. 597-611
summary	The component layout or packaging problem requires efficient search of large, discontinuous spaces. This survey paper reviews the state-of-the-art in product layoutalgorithms. The focus on optimization and geometric interference calculation strategies addresses the common aspects of the layout problem for all applications.
keywords	Intelligent Packaging, Product Layout, Optimization, Stochastic Optimization
series	journal paper
last changed	2003/05/15 21:33

_id	2cd9
authors	Ceccato, C. Fischer, Th., Li Chun-Man, G. and Frazer, J.
year	2002
title	A Large-Scale Computing Infrastructure for Design Education
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 282-289
doi	https://doi.org/10.52842/conf.ecaade.2002.282
summary	Most departmental computing infrastructure reflects the state of networking technology and available funds at the time of construction, which converge in a preconceived notion of homogeneity of network architecture and usage patterns. The DMAN (Digital Media Access Network) project, a large-scale server and network foundation for The Hong Kong Polytechnic University’s School of Design, was created as a platform that would support a highly complex academic environment while giving maximum freedom to students, faculty and researchers through simplicity and ease of use. As a centralized multi-user computation backbone, DMAN faces an extremely heterogeneous user and application profile, exceeding implementation and maintenance challenges of typical enterprise, and even most academic server set-ups. This paper summarizes the specification, implementation and application of the system while describing its significance for design education in a computational context.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	42eb
authors	Chastain, Th., Kalay, Y.E. and Peri, C.
year	2002
title	Square peg in a round hole or horseless carriage? Reflections on the use of computing in architecture
source	Automation in Construction 11 (2) (2002) pp. 237-248
summary	We start with two paradigms that have been used to describe the relationship of computation methods and tools to the production of architecture. The first is that of forcing a square peg into a round hole –– implying that the use of a tool is misdirected, or at least poorly fits the processes that have traditionally been part of an architectural design practice. In doing so, the design practice suffers from the use of new technology. The other paradigm describes a state of transformation in relationship to new technology as a horseless carriage in which the process is described in obsolete and `backward' terms. The implication is that there is a lack of appreciation for the emerging potentials of technology to change our relationship with the task. The paper demonstrates these two paradigms through the invention of drawings in the 14th Century, which helped to define the profession of architecture. It then goes on to argue that modern computational tools follow the same paradigms, and like drawings, stand to bring profound changes to the profession of architecture as we know it.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddssar0225
id	ddssar0225
authors	Ozsariyildiz, S.S., Sariyildiz, I.S. and Stouffs, R.
year	2002
title	ICKT support for the Building Industry: A Virtual Partner
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	We are now at a stage in which ICKT techniques allows us to develop knowledge intensive systems, such as intelligent decision support systems, to support collaboration and cooperation. This paper describes a theoretical approach, in which collaborative agents take on the role as a partner during the decision making process, in order to support various actors in the building process. The group-decision making set-up will be discussed and we will give an overview on the state of art of this subject. We will give some insights into their application in the building practice. In addition, we will provide some examples of use-case-scenarios as inception and early design support and evaluate it.
series	DDSS
last changed	2003/08/07 16:36

_id	bff9
authors	Proctor, George (Ed.)
year	2002
title	ACADIA 2002 [Conference Proceedings]
source	Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X / Pomona (California) 24-27 October 2002, 446 p.
doi	https://doi.org/10.52842/conf.acadia.2002
summary	The 2002 ACADIA conference finds digital tec_nology ubiquitous as the Association for Computer Aided Design in Architecture moves into its third decade. The organization of ACADIA is on the threshold of restating its mission. After 20 years, many of the organization’s initial objectives have been achieved. ACADIA members have been instrumental in the development of design software, and in bringing computers and digital technology into architectural practice and design school curriculum. At first, ACADIAns faced the debate over the appropriateness and utility of digital technology in the disciplines of architecture, planning and building science. Today the use of computers and information technology is widely accepted by architects and CAAD and digital technology have brought profound change to design practice. The debate in ACADIA has long since moved from "should we use this technology" to "how", "for what" and "why". Now that many practitioners, learning institutions and professional organizations have taken up the call, ACADIA must restate its mission, if it wishes to remain “distinct”. This does not mean that the work of ACADIA is complete. Much remains to be done and much more needs to be improved. ACADIA’s Mission Statement places particular focus on “education and the software, hardware and pedagogy involved in education.” And “(t)he organization is also committed to the research and development of computer aides that enhance design creativity, and that aim at contributing to the construction of humane physical environments.” These are the areas that continue to evolve, grow and provide for ACADIA’s continued relevance. The ACADIA 2002 conference theme reflects the state of digital technology’s application to the discipline, as much as it refers to ACADIA’s future. With the general acceptance of digital technology and CAAD, we have arrived at a place where the work of great interest and relevance lies in the space between what is digital and what is analog. The environments of real space and cyberspace have in a very short time become so intertwined that the space between real and virtual (not to be confused with reality and fantasy) is becoming indistinguishable. You cannot eat, travel, use public utilities, bank, shop, vacation or recreate without at the very least coming into contact with or passing through information space. The landscape between these two environments has become a cultural phenomenon for those societies with access to the Internet and information networks. And while the computer and World Wide Web have empowered individuals, the collective impact of the technology holds all the potential and problems that similarly emerged in other technology induced landscapes. Consider this last point in the context of ACADIA’s stated mission to “enhance design creativity while contributing to the construction of humane physical environments.” And you can see why many of the 260 initial submissions to this conference were in the area of design artifacts and design methodology, providing evidence that ACADIA’s mission remains relevant and in accord with the trends of research and professional creative activity.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	2005_125
id	2005_125
authors	Schoch, Odilo
year	2005
title	Applying a Digital Chain in Teaching CAAD and CAAM
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 125-129
doi	https://doi.org/10.52842/conf.ecaade.2005.125
summary	This paper describes a successful approach in teaching caad and the use of state-of-the art caad-technologies in postgraduate architectural education. Since it’s first set up in the year 2002, variations of this curriculum were applied on an annual basis. Its main characteristic is the efficient transfer of knowledge and practical use of more than 10 central techniques in CAAD/CAAM (computer aided architectural manufacturing) within the tight period of 6 months. Recipients were international postgraduate students from the field of architecture and related disciplines. Their studies were a full-time course lasting 12 months with six months modular introduction and 6 months individual and group thesis works.
keywords	Teaching, Collaborative Design, CNC Production, Mass Customisation, Education & Practice, User Participation, Web-based Design
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ga0209
id	ga0209
authors	Viscardi, Anthony
year	2002
title	Arms, Wings, & Mechanical Things analogue…assimilation…appropriation
source	International Conference on Generative Art
summary	Using analogy in the form of design assimilation, one is positioned to rely on his or her creative ability to associate and fabricate objects that engage materials into relationships that convey parallel meanings. These constructions can, in turn, establish formal orders that become the basis for an architectural grammar of details. Their meaning is gained through their ability to conform or transform to the context in which they are placed. These construction details can also be employed as a point of departure in the development of a design process. Through an analogical study of the joints in the body, the invention of a joint detail can form the basis of an architectural vocabulary that can lead to several forms of design development.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	4219
authors	Wang, Shengwei and Wang, Jin-Bo
year	2002
title	Automatic sensor evaluation in BMS commissioning of building refrigeration systems
source	Automation in Construction 11 (1) (2002) pp. 59-73
summary	A strategy and software is developed to automatically diagnose and evaluate the Building Management Systems (BMS) sensors of building refrigeration systems during commissioning or periodical check (recommissioning). The strategy is based on the first law of thermodynamics (i.e., heat and mass balance of water networks). The strategy evaluates soft sensor faults (biases) by examining and minimizing the weighted sum of the squares of the concerned mass and/or steady state energy balance residuals represented by the corrected measurements over a period, on the basis of the measurements downloaded from BMS. A Genetic Algorithm is employed to determine the global minimal solution to the multimodal objective function, which can be difficult to achieve by traditional gradient-directed search methods. The sensor bias estimates, the confidence intervals of bias estimates and the comparisons of the balance residuals before and after the correction are generated by the software to provide a convenient and reliable means for the engineers to check and diagnose the measurement devices of BMS. The strategy, the software configuration and examples of application are presented in this paper.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	63d1
authors	Rapid Prototyping Group Rapid Design and Manufacture Centre (RDM), Ryder, G., Ion, B., Green, G., Harrison, D. and Wood, Bruce
year	2002
title	Rapid design and manufacture tools in architecture
source	Automation in Construction 11 (3) (2002) pp. 279-290
summary	The continuing development of Rapid Prototyping technologies and the introduction of Concept Modelling technologies means that their use is expanding into a greater range of applications. The primary aim of this paper is to give the reader an overview of the current state of the art in Layered Manufacturing (LM) technology and its applicability in the field of architecture. The paper reports on the findings of a benchmarking study, conducted by the Rapid Design and Manufacturing (RDM) Group in Glasgow [G.J. Ryder, A. McGown, W. Ion, G. Green, D. Harrison, B. Wood, Rapid Prototyping Feasibility Report, Rapid Prototyping Group, Glasgow School of Art, 1998.], which identified that the applicability of LM technologies in any application can be governed by a series of critical process and application specific issues. A further survey carried out by the RDM group investigated current model making practice, current 3D CAD use and current use of LM technologies within the field of architecture. The findings are then compared with the capabilities of LM technologies. Future research needs in this area are identified and briefly outlined.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	730e
authors	Af Klercker, Jonas
year	1997
title	Implementation of IT and CAD - what can Architect schools do?
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 83-92
summary	In Sweden representatives from the Construction industry have put forward a research and development program called: "IT-Bygg 2002 -Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. A seminar was held with some of the most experienced researchers, developers and practitioners of CAD in construction in Sweden. The activities were recorded and annotated, analysed and put together afterwards; then presented to the participants to agree on. Co-operation is the key to get to the goals - IT and CAD are just the means to improve it. Co-operation in a phase of implementation is enough problematic without the technical difficulties in using computer programs created by the computer industry primarily for commercial reasons. The suggestion is that cooperation between software companies within Sweden will make a greater market to share than the sum of all individual efforts. In the short term, 2 - 5 years, implementation of CAD and IT will demand a large amount of educational efforts from all actors in the construction process. In the process of today the architect is looked upon as a natural coordinator of the design phase. In the integrated process the architect's methods and knowledge are central and must be spread to other categories of actors - what a challenge! At least in Sweden the number of researchers and educators in CAAD is easily counted. How do we make the most of it?
series	AVOCAAD
last changed	2005/09/09 10:48

_id	ddssar0202
id	ddssar0202
authors	Akin, Ömer and Özkaya, Ipek
year	2002
title	Models of Design Requirement
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Case studies show that significant proportions of design errors and failures are linked to poor requirement specification during both early stages of design and as changes occur. Computational requirements engineering as a front-end to design iterations is a promising area addressing theseproblems. In other design disciplines, such as in software engineering, requirement engineering has given significant product improvements. In this paper, we present a state-space representation of requirement models for architectural design. The purpose of requirement modeling in design is tocreate a process by which requirements can be converted into working design solutions through frontend validation. We suggest three models of requirement specification, co-evolutionary [CoM], multiple domain [MDM] and single domain [SDM] models, that can facilitate this effort. Taken together all three models provide a full set of logical permutations of requirement-solution “worlds” and “operations.” We compare each model against the others in terms of facilitating change management and computability.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssar0203
id	ddssar0203
authors	Alkass, Sabah and Jrade, Ahmad
year	2002
title	A Web-Based Virtual Reality Model for Preliminary Estimates of Hi-Rise Building Projects
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Cost estimating of a construction project at its early stage is considered to be very important task since it will be used as a base to commit or otherwise not to commit funds to that project. Preparation of a reliableand realistic preliminary estimate to aid the decision makers to commit funds for a specific project is a complicated assignment. Traditional methods and operations produced unsatisfactory aid due to lack ofaccuracy especially in the pre-design stage of a project. This participates in the increase of percentage of bankruptcy in the construction industry, which has dramatically climbed up and ranked as 15 percent of thewhole bankruptcies claimed in Canada (Statistic Canada 1998). This paper presents a methodology for developing and a Web-based model to automate preliminary cost estimates for hi-rise buildings. This is achieved by integrating a database with design drawings in a Virtual Reality (VR) environment. The model will automatically generate preliminary estimates after modifying a 3D CAD drawing. It provides the user the option to visualize and simulate the drawing and its cost data through VR environment. Having done that, it will allow owners, architects and cost engineers to view a constructed building project, change its geometric objects and shapes, and accordingly generate a new conceptual cost estimate.
series	DDSS
last changed	2003/11/21 15:15

_id	ga0230
id	ga0230
authors	Annunziato, Mauro and Pierucci, Piero
year	2002
title	Human-Artificial Ecosystems: Searching for a Language
source	International Conference on Generative Art
summary	The most recent advances of artificial life scientific research are opening up a new frontier: the creation of simulated life environments populated by autonomous agents. In these environments artificial beings can interact, reproduce and evolve [4, 6, 15], and can be seen as laboratories toexplore the emergence of social behaviors like competition, cooperation, relationships and communication [3, 5, 7] . It is still not possible to approach a reasonable simulation of the incredible complexity of human or animal societies, but these environments can be used as a scientific orartistic tools to explore some basic aspects of the evolution [1, 2, 3, 9, 11, 12, 13, 14, 15, 16].
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:15

_id	ga0236
id	ga0236
authors	Antonini, Riccardo
year	2002
title	Shared, Collective, Generative, Dynamic Virtual Environments - Geneve
source	International Conference on Generative Art
summary	In this project we plan to create an experimental novel medium setup for the study of the “presence” experience in shared, collective, generative, dynamic virtual environments (GENEVEs) in order to study the cross interactions between a given GENEVE and/among its creators/users and to explore the logic of presence in each GENEVE. The new shareable / generative media will try to add personal creativity and social dimension to telefruition of contents. For the European Industry having a leading edge in the technology for hw/sw/contents for shareable novel media is both a strategic asset and a social imperative.
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:15

For more results click below: