Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 514

Reformat results as: short short into frame detailed detailed into frame

_id	7798
authors	Barrow, Larry
year	2002
title	Elitism, IT and the Modern Architect Opportunity or Dilemma
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 97-109
doi	https://doi.org/10.52842/conf.acadia.2002.097
summary	Information Technology (IT) is impacting architecture dramatically in process and form. Often thecurrent transformation of architecture is difficult to analyze and frequently we see confusion and anxietyregarding uncertainties for the future of the architect as designer and project leader. The currentpotentiality for new exotic form (i.e. product) is mesmerizing; however, in the current context, lessobvious issues and pertinent questions are emerging for the profession. What is the mission of theprofession? What will keep us relevant in the mist of the new global society?In this paper, we will take an evolutionary perspective of technology in architecture and draw parallelsbetween the Renaissance, which is the genesis of the modern architect, and the contemporary state ofarchitecture. The modern architect was birthed during the Renaissance where we see the retraction ofthe architect from the building site and separation from direct involvement in the building process.Communications technology (i.e. representation in the form of free-hand drawings, mechanical 2Dorthographic drawings and 3D perspectives) enabled the decomposition of the master builder into threecomponents (i.e. artist-designer, practicing_architect, and builder). Thus, we see technology enable thedenigration and ultimate dissolution of the centuries old craftsman guilds and the master builder. Thetechnology evolution of “drawings” enabled monumental change in the process of architecture over thepast five hundred years. The fission of the master builder, enabled by “drawings”, resulted in disparatefactions which are the forerunners of the modern day litigious design-bid-build project delivery. We nowincreasingly see a return to the fusion of design and building where often the architect is not the projectmanager or leader. Thus, the question looms, will the 21st century architect lead or be led, and whatare the ramifications for the profession?The historical Master Builder is re-emerging as a dynamically networked team of design andconstruction knowledge specialists. Bi-lateral knowledge exchange, enhanced with emerging IT, isoccurring between owners, managers, architects, design specialists, engineers, builders and machines.Technology is disrupting architecture, resulting in increasing specialization and compressed timeframes, and may require reevaluation of the role of the architect as project-leader "integrativegeneralist"or "design-specialist".Conclusively, the concept of ‘cybernetic architecture’ is proposed as an IT reference framework. Failureto appropriately respond to societal evolution, driven by technology, could result in the loss ofprofessional status for the modern architect. Herein lies our dilemma, or opportunity, depending on therole choice of the modern architect.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	63c3
authors	Burdi, Luciana
year	2002
title	Evaluating the Use of a Web-Based Collaborative Interactive Digital Model (CollABITA) in Supporting the Urban Design Approval Process1
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, III.1-III.15
summary	This research, after analyzing the Urban Development Approval Process in its functionalities and methodologies, is showing the key points at which the process might be supported by new computer technologies, and it establishes a web-based Collaborative Interactive Digital Model (CollABITA Model) that relates and facilitates the graphical representation of the urban design process with some elements of the methodological approach. The CollABITA Model will dramatically facilitate the idea of broadening public participation, and indirectly by this, also collaboration. This new web-based support tool, is focusing on how new Informative Computer Technologies can be used in order to have a more co-operative design process. By utilizing the enormous potential of Internet for informing the process, and software for visualizing its products, the Model will provide an effective support, which will be able to deliver information in various forms to the Designers, Developers, Decision Makers, Agencies and the final user (the Citizens). The Model is concerned with the big challenge of supporting the urban design approval process itself, by exploring different kind of visualizations and communication tools, rather than producing a guide for carrying out the design. CollABITA Model is based on the existent framework structure of the extranet tool already available. Then, more then those, CollABITA Model will try to solve, by adding technical and collaborative functionalities, those issues that are characteristics in the urban design process and that are not jet solved by using one of the software .
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/03/29 10:43

_id	ddssar0210
id	ddssar0210
authors	Friedl, G., Trum, H.M.G.J. and Rutten, P.G.S.
year	2002
title	An Innovative Model of the Building Development ProcessDesign as a Process of Crystallisation
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In the past, models describing the development of artefacts, including buildings, usually were of a linear nature thereby suggesting a sequential path from conception of the artefact to its completion. This has consequences for the sequence of activities in the design and programming phase. However, designing is basically a thinking activity and is as such not bound to the same laws as e.g. the construction process. This must have repercussions for the way the design process is designed andmanaged. The proposed conceptual model of the artefact development process – in this case a building design process – is a kind of framework which is more in accordance with the nature of thinkingactivities. It should stimulate a non-sequential process. The development of a solution to a design problem thus should become a responsive search process driven by insights and creative leaps but guided by the framework the model provides. Furthermore, the model is meant to support the exploration and clarification of the problem as well as to extend the solution space by various means such as the development of scenarios and strategic values as a basis for the realisation of the building project’s goals. This model is an essential element in the development of an innovative approach towards the process design of the building design process. The creation of a building (conception, design and development) is not considered a sequential process but a process of crystallisation with the potential of developing in all directions, thus growing from a conceptual centre outwards.
series	DDSS
last changed	2003/08/07 16:36

_id	d65c
authors	Glymph, J., Shelden, D., Ceccato, C., Mussel, J. and Schober, H.
year	2002
title	A Parametric Strategy for Freeform Glass Structures Using Quadrilateral Planar Facets
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 303-321
doi	https://doi.org/10.52842/conf.acadia.2002.303
summary	The design and construction of freeform glass roofing structures is generally accomplished through theuse of either planar triangular glass facets or curved (formed) glass panes. This paper describesongoing research on the constructability of such structures using planar quadrilateral glass facets for theJerusalem Museum of Tolerance project by Gehry Partners, in collaboration with Schlaich Bergermann& Partners, engineers. The challenge here lies not only in the development of a geometric strategy forgenerating quadrilateral planar facet solutions, but also in the fact that said solutions must closely matchthe designs created initially in physical model form by the architects.We describe a simple but robust geometric method for achieving the structure by incorporating thenecessary geometric principles into a computational parametric framework using the CATIA Version 5system. This generative system consists of a hierarchical set of geometric ‘control elements’, that drivethe design toward constructible configurations. Optimization techniques for approximating the generatedstructural shape to the original created by the designers are also described. The paper presents theunderlying geometric principles to the strategy and the resulting computational approach.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	9f9c
authors	Hu, Xiaochun
year	2002
title	An Information-based Framework for Composites Design
source	Drexel University
summary	The heterogeneity of composites determines that composite materials can be engineered to better satisfy a specific design requirement. The main problems that have hindered the application of composites are the need for the material and manufacturing design to be conducted simultaneously, the involvement of a large number of design factors, the difficulty in the characterization of composites, and the inherent repetition of the design process. Considering these problems, this thesis presents an information-based framework for composites design. This research consists of four main aspects: (1) The development of a heterogeneous CAD modeling algorithm and an integrated CAD/CAE method, and their application in a unit cell-based characterization of composite materials with a complex fiber form; (2)The development of a unit cell database for improving the material and manufacturing process design, which covers the design of its database model and the access strategies based on the logic architecture of unit cells and the relationships among elements of unit cells and with the environments; (3)The design of an Information-Based Design Support System (IBDSS) to support the composites design by using the unit cell database, in which the blackboard framework is adopted for the system to organize various computer techniques for different design stages, and to support the design iterating to satisfactory ones incrementally and efficiently, and the data structure of the blackboard, the algorithm to control design iterations, and design procedures for every stage are studied; and (4) The introduction of a ranking-based unit cell evaluation methodology and effective ranking factors for facilitating and improving the composite design process. The approach improves the efficiency of composites design by automating design iterations, supporting composite characterization, alleviating the cost of composite material and manufacturing method design, and assisting in tailored material selection. Case studies are presented to show how the IBDSS is applied to support composites design.
keywords	Mechanical Engineering
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ecaade2014_057
id	ecaade2014_057
authors	Ivo Vrouwe and Burak Pak
year	2014
title	Framing Parametric and Generative Structures - A Novel Framework for Analysis and Education
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 365-371
doi	https://doi.org/10.52842/conf.ecaade.2014.1.365
wos	WOS:000361384700036
summary	In this paper we aimed at the development of a novel tool to facilitate the structured analysis of architectural construction principles, materials and production methods in digital design and fabrication practices. In order to assist the understanding and teaching of these subjects, we employed a taxonomy of spatial design construction (Vrouwe 2013). By using the taxonomy, we analysed and categorised 34 parametric structures published in the IJAC Journal (2002-2014). Informed by this study, we aligned the initial taxonomy using various framing strategies. As a result we developed a new framework for spatial design construction specifically customised for the design and fabrication of parametric structures which can potentially serve as a constructive tool to create a novel design learning environment and integrated teaching strategies.
keywords	Digital fabrication; parametric design; education; framing; pedagogy
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ga0205
id	ga0205
authors	Krawczyk, Robert J.
year	2002
title	Architectural Interpretation of Cellular Automata
source	International Conference on Generative Art
summary	Mathematical constructions and concepts can be utilized in a number of methods to investigate the process of generating architectural forms. One is to technically layout architectural elements along such constructions, another is to explicitly develop forms corresponding exactly to the underlying concept, and another is to use such concepts as inspiration, a starting point for design. A hybrid method is to follow an interpretive approach, one that uses a mathematical concept as a framework to begin to investigate architecture forms. Architectural considerations are applied both at the beginning of the process and continually throughout the process as a better understanding of the underlying concept is developed. This paper attempts to use cellular automata is such a way. The process of investigating such concepts, it is believed, will help other such approaches, as well as, more traditional approaches of design development.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	9d2e
authors	Liu, H., Tang, M. and Frazer, J. H.
year	2002
title	A Knowledge Based Collaborative Design Environment
source	Gero JS and Brazier FMT (eds) (2002) Agents in Design 2002. Key Centre of Design Computing and Cognition, University of Sydney, pp. 233-246
summary	In this paper, we propose an agent based collaborative design environment in which human designers and software agents interact with each other, exchange design information and keep track of state information to assist with collaborative design. First of all, it presents a hierarchical multi-agent system architecture for integrating design and engineering tools, software agents and human specialists in an open environment. The hierarchical multi-agent system architecture offers a promising framework with their novel approaches for dynamically creating and managing design tasks in widely distributed and ever-changing design environments. Secondly, it introduces a collaborative design process model and the dynamic management approach for collaborative design process. Then, the structure of a design agent, its static knowledge and dynamic knowledge are introduced respectively. The knowledge based design approach provides a foundation for supporting reusable design activities. Finally, the cooperative design process is illustrated by a bicycle design example.
series	other
email
last changed	2003/05/10 10:16

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
doi	https://doi.org/10.52842/conf.acadia.2016.140
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	bb35
authors	Paranandi, Murali
year	2002
title	An Inquiry Into Computers in Design: When Cardboard Met Computer
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 329-337
doi	https://doi.org/10.52842/conf.caadria.2002.329
summary	This paper reflects on the experiences of teaching undergraduate design studios for past 4 years and presents a systematic investigation conducted in a classroom setting to further understand the role of computer in conceptual stages of design. A case study project inquiring the implications of using two different forms of media, namely cardboard and computer, for design development during conceptual stages is presented. Twelve novice designers were challenged to learn and use computers in a five-week design project. A conceptual framework for understanding the discovery and usefulness of computer in their design process was developed and tested. An analysis of the outcome indicated that computers played a positive role in student innovation, improving possibilities for discovery. It further revealed that the employing cardboard was useful in turning the abstract discoveries made by the computers into productive and useful design solutions. It also supported the notion that the novice designer’s use of photorealistic possibilities offered by computer visualization (rendering, animation) during conceptual stages of design had an effect of distraction rather than a design aid.
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ddssup0214
id	ddssup0214
authors	Pelizaro, C., Timmermans, H., Laing, R. and Miller, D.
year	2002
title	Towards A Decision Support System for the Planning, Design and Maintenance of Urban Green Space
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	As one of the domains of urban planning and design, that of green space is lagging behind in terms of the use of advanced computer technology, mo dels and design methodology compared to, for example, retail and transportation planning. However, recently, there is some evidence of the development and testing of tools such as visualization, GIS and conjoint analyses in this area, although not of more integrated Decision Support Systems. The purpose of this study is to outline ideas and needs for thedevelopment of a Decision Support System for the planning and design of green space. The objective is to provide planners with an integrated framework for the provision and management of these parts of urban areas.
series	DDSS
last changed	2003/08/07 16:36

_id	b0f9
authors	Peng, C., Chang, D., Blundell-Jones, P. and Lawson, B.
year	2002
title	On an alternative framework for building virtual cities: supporting urban contextual modeling on demand
source	Environment and Planning B: Planning and Design, Vol. 29, pp 87-103, Jan 2002
summary	For various purposes, virtual city applications have been developed around the globe to provide users with online resources and services over the Internet. Following our research on the Sheffield Urban Contextual Databank (SUCoD) project, this paper presents an alternative framework for building virtual cities, which goes beyond conventional static urban modelling. A three-tier system framework is described in conjunction with the design and implementation of the SUCoD prototype. We demonstrate SUCoD's novel functionalities by showing that complex urban contextual information sets, including three-dimensional interactive models, multilayer interactive maps, and hypermedia documents, can be retrieved dynamically by user-specified urban contextual attributes, spatial loca- tions, and boundaries. The three-tier framework also facilitates system development in an extensible way, allowing continuous parallel extensions of system functionalities, user-interface components, and contextual data resources. SUCoD's dynamic capabilities are considered crucial in its future uses for urban contextual modelling on demand in relation to the past, present, and future of the City of Sheffield.
series	journal paper
last changed	2003/04/23 15:50

_id	ddssup0215
id	ddssup0215
authors	Ruiz, M., Fornés, A., Ramon, J., Alorda, J. Goula, M. and Pié, R.
year	2002
title	GIS Tools for Landscape Impact Assessment
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	This paper present the main results obtained by the development of the Artemis Project ”Design and Evaluation of Residential Patterns in the Mediterranan Region appropiate to sustainable development of environmentally deteriorated rural areas” 4th European Framework Program. Call ENVIRONMENT AND CLIMATE . ENV4-CT97-0656.) As results of the project an Integrated Landscape Assessment Model (AIAM) was created. AIAM is a resource modelling system focusing on the generation of a decision support system application oriented to provide criteria in order to evaluate effects and to optimise location of low density residential settlements. The Model includes a Landscape multicriteria analysis merged with spatial analysis tools set in a GIS Environment. The A.I.A.M. provides data structures, user interface components, and output mechanism witch allows the user to apply the knowledge acquired for Artemis Project. One of the main goals of the A.I.A.M is to give a landscape view of the territory including variables that are usually not considered in planning and environmental impact assessment processes. Also the models gives a sustainable support both to planner and designers projects. A.I.A.M. gives the data structure to define a residential patterns, the parameters through which a pattern is adequately described. This pattern definition allows comparison between the one’s of the reference area and so, extract conclusions about divergence between them.
series	DDSS
last changed	2003/08/07 16:36

_id	ea19
authors	Russell, Peter
year	2002
title	Teaching Concurrent Engineering Using Intensive Interdisciplinary Robotic Workshops
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 361-368
doi	https://doi.org/10.52842/conf.caadria.2002.361
summary	The métier of architecture is, contrary to the myth of the single visionary architect, one of co-ordinated interdisciplinary teamwork. For students of architecture, this concept can be somewhat abstract without the chance for hands-on experience in working in such teams. The authors contend that this type of co-operation is better trained than taught. As a consequence, the authors have sought to create a pedagogical framework for training interdisciplinary work: Furthermore, by using assignments that call for concurrent engineering, the framework allows students to understand the complexities of integrated planning practices. The paper explains the methods and results of workshops carried out at two Universities over the past one and one-half years. Students are arranged in small teams of 3-5 students consisting optimally of architects, engineers and computer programmers. The assignment is to build and program a robot to successfully execute a prescribed set of objectives. The 10- day workshop is carried out as a competition in order to accelerate the development process and to focus the design work to a specific goal.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ddssup0216
id	ddssup0216
authors	Saarloos, D.J.M., Arentze, T.A., Borgers, A.W.J. and Timmermans, H.J.P.
year	2002
title	Towards a Local Planning Support System,Introducing the MASQUE Framework
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	Urban planning is an important instrument for improving the quality of life, but it is hampered by the fact that the effects of many decisions, to be made by the planner, are practically unknown or at best unclear. The high level of complexity, uncertainty and subjectivity involved in urban plan development is seriously troubling the planner. One way of facilitating the plan development process, and potentially improving the decision-making, is developing a Planning Support System (PSS) that combines artificialintelligence with a gamut of computational tools that support the process. At the Eindhoven University of Technology a research program is conducted to develop such a system for local urban planning in the Netherlands. The system, named MASQUE (Multi-Agent System for supporting the Quest forUrban Excellence), applies Multi-Agent technology to incorporate multidisciplinary expertise on both tools and domains as well as to enable intelligent guidance and assistance towards the user. Strong emphasis is put on the scenario-based way of working that is common in urban planning. This paper puts forward the difficulties faced in local planning practice and discusses the possibilities for computer-assistance. This finally resolves into the introduction of the MASQUE framework, describing how the system is organized and how the agents will be involved.
series	DDSS
last changed	2003/08/07 16:36

_id	e679
authors	Seichter, H., Donath, D. and Petzold, F.
year	2002
title	TAP – The Architectural Playground - C++ framework for scalable distributed collaborative architectural virtual environments
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 422-426
doi	https://doi.org/10.52842/conf.ecaade.2002.422
summary	Architecture is built information (Schmitt, 1999). Architects have the task of restructuring and translating information into buildable designs. The beginning of the design process where the briefing is transformed into an idea is a crucial phase in the design process. It is where the architect makes decisions which influence the rest of the design development process (Vries et al., 1998). It is at this stage where most information is unstructured but has to be integrated into a broad context. This is where TAP is positioned – to support the architect in finding solutions through the creation of spatially structured information sets without impairing thereby the creative development. We want to enrich the inspiration of an architect with a new kind of information design. A further aspect is workflow in a distributed process where the architect’s work becomes one aspect of a decentralised working patterns. The software supports collaborative work with models, sketches and text messages within an uniform surface. The representations of the various media are connected and combined with each other and the user is free to combine them according to his or her needs.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	e5a6
authors	Senagala, Mahesh
year	2002
title	Time-like Architectures: The Emergence of Post-spatial Parametric Worlds
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 69-76
doi	https://doi.org/10.52842/conf.acadia.2002.069
summary	A new trend is emerging in architecture today: dynamic and time-like architectures (term derived fromthe language of Theory of Relativity) that are capable of moving, flexing and reconfiguring themselvesthrough globally networked control mechanisms are emerging. Such buildings maybe "pluggedinto" the information networks and can be manipulated through remote interaction. Architecture canbe published, literally. At this time there is no one theoretical framework available to address sucharchitectural efforts and the paper is aimed at providing a framework under the rubric of "TimelikeArchitectures". The paper addresses the unprecedented transformation of the spatial and temporalfoundations of architecture by a convergence of two technological developments: global real-timeinformation networks and kinetic, pneumatic tectonics. Envisioned and in some cases built by agroup of avant-garde architects, time-like architectures are poised to become a norm in a nottoo distant future. The paper will identify, define and outline few time-like works. The paper willalso outline the historical, theoretical and ethical relationships between post-spatial (authors term),post-modern and modern architectures using Charles Jencks’ structuralist classification,Evolutionary Tree.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	drs_thesis_0902
id	drs_thesis_0902
authors	Shelden, D.
year	2002
title	Digital Surface Representation and the Constructability of Gehry’s Architecture
source	PhD Thesis MIT, Cambridge, MA
summary	This thesis presents work in the development of computational descriptions of Gehry’s architectural forms. In Gehry’s process for realizing buildings, computation serves as an intermediary agent for the integration of design intent with the geometric logics of fabrication and construction. This agenda for digital representation of both formal and operational intentions, in the context of an ongoing exploration of challenging geometries, has provided new roles for computation in architectural practice. The work described in this thesis focuses on the digital representation of surface geometry and its capacity for describing the constructibility of building enclosure systems. A particular class of paper surface forms – curved surfaces with minimal in plane deformation of the surface material – provide the specific object of inquiry for exploring the relationships between form, geometry and constructibility. An analysis and framework for the description of Gehry’s geometry is developed through existing theory of differential geometry and topology. Geometric rules of constructibility associated with several enclosure system strategies are presented in this framework. With this theoretical framework in place, the discussion turns to efforts to develop generative strategies for the rationalization of surface forms into constructible configurations.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	ga0224
id	ga0224
authors	Tarabella, Leonello
year	2002
title	pCM (pure C Music): a real-time music language
source	International Conference on Generative Art
summary	In order to put to work the facilities offered by the gesture interfaces realised at cART project of CNR, Pisa, I started writing basic libraries for processing sound and for driving the gesture interfaces. In the long run the framework became a very efficient, stable and powerful “music language” based on pure C programming, that is “pure-C-Music”, or pCM. This programming environment gives the possibility to write a piece of music in terms of synthesis algorithms, score and management of data streaming from gesture interfaces. The pCM framework falls into the category of the “embedded music languages” and has been implemented using one of the most popular C compilers or better, multiplatform development systems: Metrowerks’ Code Warrior. As a result a pCM composition consists of a CW project which includes all the necessary libraries, including a DSP.lib consisting of a number of functions able to implement in real-time the typical synthesis and processing elements such as oscillators, envelope shapers, filters, delays, reverbs, etc. The composition itself is a C program consisting, mainly, of the Orchestra() and Score() functions. Everything here is compiled into machine code and runs at CPU speed.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	2d44
authors	Tsou, Jin-Yeu and Chow, Benny
year	2002
title	Integrating Scientific Simulation with Rapid-Prototyping Modeling for Design Curriculum Development
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 548-551
doi	https://doi.org/10.52842/conf.ecaade.2002.548
summary	Although Computer-Aided Architectural Design tools have been introduced to studios for design visualization and communication, tangible models constructed by cardboard or other modeling materials still play an important role in assisting students on developing their conceptual framework related to spatial organization. A Rapid Prototyping (RP) system could provide a paradigm shift from the existing workflow of hand-made architectural model into an automated computer-aided manufacturing (CAM) environment. The introduction of computer controlled manufacturing technology will not limit the use of current conventional model making, and it will provide new capabilities for precise scaled model making and the possibility to generate free-form surface models for design representation. Because the technical capabilities of RP system could dramatically change the design workflow, the computer-aided manufacturing approach for architectural design has been adopted by overseas and local academic institutions. In this paper, we report the findings of a pilot study that applied rapid prototyping technology in architectural design education for helping students exploring an automated computer-aided manufacturing environment during early stage of design development.
series	eCAADe
email
last changed	2022/06/07 07:57

For more results click below: