Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 511

Reformat results as: short short into frame detailed detailed into frame

_id	c82f
authors	Chang, Yu-Li
year	2002
title	Exploring syntax and semantics of spatial structure - A study on Traditional Taiwanese City form in Chi’i’ng Dynasty
doi	https://doi.org/10.52842/conf.ecaade.2002.412
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 412-416
summary	Abstract. In this paper, we want to figure out the relations of complex semantics and syntax on five traditional Taiwanese cities in Chi’i’ng Dynasty by using a language approach. The issues of traditional Taiwanese central city in Chi’ing Dynasty had been interpreting by historical, social, and cultural research but had lacked the explicit construction of spatial structure on semantics-syntax. Therefore, we use a data modeling on knowledge level to describe the relationship between syntax and semantics. Through the research of Chi’ing Dynasty‘s history, we find out the spatial relations of Taiwanese traditional city to establish the functional categories of spatial structures. Then the language of semantics components and the meaning’s attributes are coded as logical statements to map the elements of syntax on architectural form, political vocabularies, spatial layout, and spatial myth. We argue that using this approach several social and spatial structures of cities can be clearly defined and understood.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	6a37
authors	Fowler, Thomas and Muller, Brook
year	2002
title	Physical and Digital Media Strategies For Exploring ‘Imagined’ Realities of Space, Skin and Light
doi	https://doi.org/10.52842/conf.acadia.2002.013
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 13-23
summary	This paper will discuss an unconventional methodology for using physical and digital media strategies ina tightly structured framework for the integration of Environmental Control Systems (ECS) principles intoa third year design studio. An interchangeable use of digital media and physical material enabledarchitectural explorations of rich tactile and luminous engagement.The principles that provide the foundation for integrative strategies between a design studio and buildingtechnology course spring from the Bauhaus tradition where a systematic approach to craftsmanship andvisual perception is emphasized. Focusing particularly on color, light, texture and materials, Josef Albersexplored the assemblage of found objects, transforming these materials into unexpected dynamiccompositions. Moholy-Nagy developed a technique called the photogram or camera-less photograph torecord the temporal movements of light. Wassily Kandinsky developed a method of analytical drawingthat breaks a still life composition into diagrammatic forces to express tension and geometry. Theseschematic diagrams provide a method for students to examine and analyze the implications of elementplacements in space (Bermudez, Neiman 1997). Gyorgy Kepes's Language of Vision provides a primerfor learning basic design principles. Kepes argued that the perception of a visual image needs aprocess of organization. According to Kepes, the experience of an image is "a creative act ofintegration". All of these principles provide the framework for the studio investigation.The quarter started with a series of intense short workshops that used an interchangeable use of digitaland physical media to focus on ECS topics such as day lighting, electric lighting, and skin vocabulary tolead students to consider these components as part of their form-making inspiration.In integrating ECS components with the design studio, an nine-step methodology was established toprovide students with a compelling and tangible framework for design:Examples of student work will be presented for the two times this course was offered (2001/02) to showhow exercises were linked to allow for a clear design progression.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	drs_thesis_0902
id	drs_thesis_0902
authors	Shelden, D.
year	2002
title	Digital Surface Representation and the Constructability of Gehry’s Architecture
source	PhD Thesis MIT, Cambridge, MA
summary	This thesis presents work in the development of computational descriptions of Gehry’s architectural forms. In Gehry’s process for realizing buildings, computation serves as an intermediary agent for the integration of design intent with the geometric logics of fabrication and construction. This agenda for digital representation of both formal and operational intentions, in the context of an ongoing exploration of challenging geometries, has provided new roles for computation in architectural practice. The work described in this thesis focuses on the digital representation of surface geometry and its capacity for describing the constructibility of building enclosure systems. A particular class of paper surface forms – curved surfaces with minimal in plane deformation of the surface material – provide the specific object of inquiry for exploring the relationships between form, geometry and constructibility. An analysis and framework for the description of Gehry’s geometry is developed through existing theory of differential geometry and topology. Geometric rules of constructibility associated with several enclosure system strategies are presented in this framework. With this theoretical framework in place, the discussion turns to efforts to develop generative strategies for the rationalization of surface forms into constructible configurations.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	4e8c
authors	Chien, Sheng-Fen and Flemming, Ulrich
year	2001
title	Design space navigation in generative design systems
source	Automation in Construction 11 (1) (2002) pp. 1-22
summary	Generative design systems make it easier for designers to generate and explore design alternatives, but the amount of information generated during a design session can become very large. Intelligent navigation aids are needed if designers wish to access the information they generate with ease. We present a comprehensive approach to support information navigation in requirement-driven generative design systems, which gain their power form explicit representations of design requirements, which in turn add to the information generated by the system. Our approach takes into account studies dealing with human spatial cognition, wayfinding in physical environments, and information navigation in electronic media. We structure the information to be accessed in terms of a five-dimensional design space model that applies across generative design systems of the type considered here. The model structure supports basic generic navigation operations along its five dimensions. We validated the model in the context of the SEED-Layout system and used it to extend the built-in navigation tools of the system through novel ones, which we subjected to a limited usability study. The study suggests that these tools have promise and warrant further investigation.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	caadria2006_597
id	caadria2006_597
authors	CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU
year	2006
title	NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication
doi	https://doi.org/10.52842/conf.caadria.2006.x.r4i
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599
summary	In 1990, due to the traditional architecture design and construction method difficult to build the complicated and non-geometry free-form Fish Structure in Barcelona, architect Frank Gehry started learn from the field of aerospace to utilize CAD/CAM technology in design and manufacture process. He created the free-form fish model in CAD system and exported the digital CAD model data to CAM machine (RP and CNC) to fabricate the design components, and finally assembled on the site. Gehry pioneered in the new digital design process in using CAD/CAM technology or so-called digital fabrication. It becomes an important issue recently as the CAD/CAM technology progressively act as the new digital design media in architectural design and construction process (Ryder et al., 2002; Kolarevic, 2003). Furthermore, in the field of architecture professional, some commercial computer systems had been developed on purpose of standardizes the digital design process in using CAD/CAM fabrication such as Gehry Technologies formed by Gehry Partners; SmartGeometry Group in Europe and Objectile proposed by Bernard Cache. Researchers in the research field like Mark Burry, Larry Sass, Branko Kolarevic, Schodek and others are enthusiastic about the exploration of the role of CAD/CAM fabrication as new design media in design process (Burry, 2002; Schodek et al., 2005; Lee, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	d65c
authors	Glymph, J., Shelden, D., Ceccato, C., Mussel, J. and Schober, H.
year	2002
title	A Parametric Strategy for Freeform Glass Structures Using Quadrilateral Planar Facets
doi	https://doi.org/10.52842/conf.acadia.2002.303
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 303-321
summary	The design and construction of freeform glass roofing structures is generally accomplished through theuse of either planar triangular glass facets or curved (formed) glass panes. This paper describesongoing research on the constructability of such structures using planar quadrilateral glass facets for theJerusalem Museum of Tolerance project by Gehry Partners, in collaboration with Schlaich Bergermann& Partners, engineers. The challenge here lies not only in the development of a geometric strategy forgenerating quadrilateral planar facet solutions, but also in the fact that said solutions must closely matchthe designs created initially in physical model form by the architects.We describe a simple but robust geometric method for achieving the structure by incorporating thenecessary geometric principles into a computational parametric framework using the CATIA Version 5system. This generative system consists of a hierarchical set of geometric ‘control elements’, that drivethe design toward constructible configurations. Optimization techniques for approximating the generatedstructural shape to the original created by the designers are also described. The paper presents theunderlying geometric principles to the strategy and the resulting computational approach.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	046e
authors	Burry, Mark
year	2002
title	Rapid prototyping, CAD/CAM and human factors
source	Automation in Construction 11 (3) (2002) pp. 313-333
summary	CAD/CAM techniques for rapid prototyping, profile cutting, and form sculpting/routing/moulding are well-advanced for the vehicle and manufacturing industries. Although their migration to the building sector is readily achievable as a substitution for much of traditional construction, there are factors that work against this. Apart from the singular `one-off' nature of most architectural projects that limits ready exploitation of techniques derived in the main for mass-manufacture, there remains the problem of apprenticeship, and how to maintain a healthy lineage of skills for work otherwise less readily taken-up using automated manufacturing procedures. Continuing construction for Gaudí's Sagrada Família Church in Barcelona has provided a fertile test-bed for integrating rapid prototyping and CAD/CAM production where appropriate. Nevertheless, human factors such as maintaining the status quo with regard to apprenticeship and maintaining the skill lineage have provided some healthy insights into both the risks as well as the opportunities for greater involvement with CAD/CAM, and in particular, rapid prototyping in the building construction sector. This paper reports on and discusses the findings of case studies from the Sagrada Família Church project.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ecaade03_587_34_asanowicz
id	ecaade03_587_34_asanowicz
authors	Asanowicz, Alexander
year	2003
title	Architectural Composition in Digital Space
doi	https://doi.org/10.52842/conf.ecaade.2003.587
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 587-590
summary	In this paper the possibilities of using the computers at course of architectural compositions are considered. As the start point of the new teaching method of architectural composition we used the course of tradition architectural composition, elaborated at our Faculty. The course of Digital Architectural Composition was finished in 2002. The main goal of using the new digital media for modelling architectural forms was checking the new possibilities of form creation. Traditionally, searching of forms at the conceptual design stage is performed by using sketches, drawings and physical models. Our new method showed that is possible to do the same thing using the computerbased 3D modelling, experiencing no physical limitations of the 'real' substance. At the same time, at the early design stages, when formal value is sought, computer modelling can be done almost intuitively. In ours work we try to find a creative way of using computer - transforming the tool into medium. The attention was paid on exploring the possibilities characteristic for computers and not available with traditional methods of modelling. Architect’s tradition tools are effectively replaced by a computer, which create a new way of doing things.
keywords	Architectural composition, computer modelling, method of teaching
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ae2a
authors	Fowler, Thomas and Muller, Brook
year	2002
title	Physical and Digital Media Strategies For Exploring ‘Imagined’ Realities of Space, Skin and Light
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 24-27
summary	This paper will discuss an unconventional methodology for using physical and digital media strategies interchangeably in a tightly structured framework for the integration of environmental control systems (ECS) principles into a third year design studio. An eight-step methodology enabled architectural explorations of rich tactile and luminous engagement. The principles that provide the foundation for these integrative strategies between a design studio and building technology course, spring from a systematic approach that follows the tradition of the Bauhaus principles (e.g., Albers, Moholy-Nagy, Kandinsky and Kepes) of craftsmanship and visual perception.A series of intense short workshops focused on day lighting, electric lighting, and skin vocabulary to lead students to consider these components as part of their form-making inspiration. Examples of student work and their feedback on this methodology process will show how the exercises were linked to allow for a clear design progression.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	ddssar0216
id	ddssar0216
authors	Jones, Dennis B.
year	2002
title	The Quantum Matrix:A Three Dimensional Data Integration and Collaboration ToolFor Virtual Environments
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	If a picture is worth a thousand words, what if they could walk and talk? How would you like to bring a whole new dimension to your ideas; to use visualization to convey a sense of time and motion, to use imagery to give your ideas vividness; to use sound to give them voice and view them threedimensionally. The Matrix allows you to do all of this and much more. The Matrix resembles Rubik’s cube, but its purpose is to store, manage and access data of all types and to view them in three dimensions in virtual environments such as the CAVE and on your desktop. The current version can store, access and view almost anything that is in digital form, including:Text files Pictures Video Clips Sound Files Spreadsheets URL’s HTML pages Databases CAD drawings Gantt Charts Business Graphics VRML modelsExecutable Programs OLE (Object Link & Embedded) The Matrix is a three-dimensional multimedia and document management tool. The Matrix anticipates the convergence of electronic media into one consistent environment for analysis and representation. the Matrix uses VMRL and OpenGL technologies to allow the user to be immersed in their data as withCinerama, IMAX and Virtual Reality Environments. The Matrix allows the user to exercise their creativity by interactively placing and organizing their data three dimensionally and navigating through and viewingdata and documents in 3D (monocular and binocular – stereo). The Matrix user interface is simple to use. Employing the now familiar “drag and drop” method to manage data and documents. Items can be placed into the matrix grid at a user selected matrix cube location. Upon dropping a document on a cube it appears as a mapped image onto the surface. Navigating through the 3D Matrix-space is fun. All navigation uses real-time animation giving you instant feed back as to where you are. Data drilling is as simple as mouse click on a Matrix cube. Double clicking the on an object in the matrix activates that object. Data dreams was an image that preexisted the program by several years. The dream was to create a new way oforganizing and exploring data. The Qube image was created using Microstation by Bentley Systems, Inc. The figure was modeled using Poser by MetaCreations and composited using Adobe Photoshop.
series	DDSS
last changed	2003/08/07 16:36

_id	24ff
authors	Mark, Earl and Aish, Robert
year	2002
title	Exploring New Pathways Between Physical and Virtual Models - The Vaults at Fountains Abbey
doi	https://doi.org/10.52842/conf.ecaade.2002.464
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 464-470
summary	The first generations of computer aided design systems were largely characterized by geometrical modeling software that could, in some applications, generate physical output in the form of computer aided manufacturing. More recently the technology has expanded to include a variety of ways to reverse direction, such that physical objects are captured and translated into computer graphics geometrical models. Laser surveying methods that produce point clouds are among the newer technologies that make this possible. The interpretation of the point clouds and translation of them into a computer graphics three-dimensional model can be subject to various mediation processes. This paper reports on a translation environment that interprets the point clouds so as to not just replicate the physical world, but rather encapsulates it towards the refinement and realization of geometry design objectives. A case study of Fountains Abbey, a Cistercian Abbey in the United Kingdom, serves as the basis for experimentation and control of surface geometry.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	b13d
authors	Broek, J.J., Horváth, I., Smit, B. de, Lennings, A.F., Rusák, Z. and Vergeest, J.S.M.
year	2002
title	Free-form thick layer object manufacturing technology for large-sized physical models
source	Automation in Construction 11 (3) (2002) pp. 335-347
summary	Large-sized free-form objects of different materials are widely used in various industrial applications. Currently, layered rapid prototyping technologies are not suitable for the fabrication of this kind of objects, due to the necessity of a large number of layers and the limitations in size. This paper reports a novel approach of layered manufacturing that is more appropriate for the fabrication of these large objects. A method of thick-layered object manufacturing is presented, which is based on a higher order approximation of the shape and application of a flexible curved cutting tool.The method allows the production of physical prototypes, which need little or no finishing. In order to meet the designer's intend, as closely as possible, some feasible system characteristics are introduced. The process is ordered in a sequential way and provides a highly automated process. A hierarchical decomposition of the CAD geometry takes place into components, segments, layers and sectors, based on morphological analysis. This method enables the manufacturing and the re-assembly of the parts to produce the physical prototypes without affecting the requested functionality. Due to the possibility of obtaining multiple solutions in the physical model, much attention must be paid to the efficiency of the process.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	acadia17_202
id	acadia17_202
authors	Cupkova, Dana; Promoppatum, Patcharapit
year	2017
title	Modulating Thermal Mass Behavior Through Surface Figuration
doi	https://doi.org/10.52842/conf.acadia.2017.202
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 202-211
summary	This research builds upon a previous body of work focused on the relationship between surface geometry and heat transfer coefficients in thermal mass passive systems. It argues for the design of passive systems with higher fidelity to multivariable space between performance and perception. Rooted in the combination of form and matter, the intention is to instrumentalize design principles for the choreography of thermal gradients between buildings and their environment from experiential, spatial and topological perspectives (Figure 1). Our work is built upon the premise that complex geometries can be used to improve both the aesthetic and thermodynamic performance of passive building systems (Cupkova and Azel 2015) by actuating thermal performance through geometric parameters primarily due to convection. Currently, the engineering-oriented approach to the design of thermal mass relies on averaged thermal calculations (Holman 2002), which do not adequately describe the nuanced differences that can be produced by complex three-dimensional geometries of passive thermal mass systems. Using a combination of computational fluid dynamic simulations with physically measured data, we investigate the relationship of heat transfer coefficients related to parameters of surface geometry. Our measured results suggest that we can deliberately and significantly delay heat absorption re-radiation purely by changing the geometric surface pattern over the same thermal mass. The goal of this work is to offer designers a more robust rule set for understanding approximate thermal lag behaviors of complex geometric systems, with a focus on the design of geometric properties rather than complex thermal calculations.
keywords	design methods; information processing; physics; smart materials
series	ACADIA
email
last changed	2022/06/07 07:56

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ecaade2024_230
id	ecaade2024_230
authors	Fekar, Hugo; Novák, Jan; Míèa, Jakub; Žigmundová, Viktória; Suleimanova, Diana; Tsikoliya, Shota; Vasko, Imrich
year	2024
title	Fabrication with Residual Wood through Scanning Optimization and Robotic Milling
doi	https://doi.org/10.52842/conf.ecaade.2024.1.025
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 25–34
summary	The project deals with the use of residual wood of tree stumps and roots through scanning, optimization and robotic milling. Wood logging residue makes up to 50 percent of the trees harvested biomass. (Hakkila and Parikka 2002). Among prevailing strategies is leaving residue on site, and recovering residue for bioenergy. (Perlack and others 2005). The project explores the third strategy, using parts of the logging residue for fabrication, which may reduce the overall amount of wood logging volume. Furthermore approach aims for applying residue in its natural form and taking advantage of specific local characteristics of wood (Desch and Dinwoodie 1996). The project applies the strategy on working with stump and roots of an oak tree. Due to considerations of scale, available milling technics and available resources, chosen goal of the approach is to create a functioning chair prototype. Among the problems of the approach is the complex shape of the residue, uneven quality of wood, varying humidity and contamination with soil. After cleaning and drying, the stump is scanned and a 3D model is created. The 3D model od a stump is confronted with a 3D modelled limits of the goal typology (height, width, length, sitting surface area and overal volume of a chair) and topological optimization algorithm is used to iteratively reach the desired geometry. Unlike in established topological optimization proces, which aims for a minimal volume, the project attempts to achieve required qualities with removing minimal amount of wood. Due to geometric complexity of both stump and goal object, milling with an 6axis industrial robotic arm and a rotary table was chosen as a fabrication method. The object was clamped to the board (then connected to a rotary table) in order to provide precise location and orientation in 3D space. The milling of the object was divided in two parts, with the seating area milled in higher detail. Overall process of working with a residual wood that has potential to be both effective and present aesthetic quality based on individual characteristics of wood. Further development can integrate a generative tool which would streamline the design and fabrication proces further.
keywords	Robotic arm milling, Scanning, Residual wood
series	eCAADe
email
last changed	2024/11/17 22:05

_id	e5e7
authors	Fischer, Th., Fischer, T. and Ceccato, C.
year	2002
title	Distributed Agents for Morphologic and Behavioral Expression in Cellular Design Systems
doi	https://doi.org/10.52842/conf.acadia.2002.111
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 111-121
summary	After more than a century of domination by neo-Darwinian theory, biological thought is beginning to giveincreasing recognition to developmental theory. Amongst other reasons, this recent widening ofperspective is grounded on the incompleteness of the neo-Darwinian perspective in providing modelsfor the invention of novel forms or species and individual development. Evolutionary design theory hasdrawn much of its inspiration from evolutionary biology and consequently shows analogous flaws. Thispaper demonstrates an adoption of biological developmental theory to the field of design theory in orderto fill the corresponding gap. As natural developmental processes are based on the development ofcellular units, which form composite structures, this paper employs the cellular model as a means for thedevelopment of a corresponding design and construction theory. The discussion of this approachincludes possible linkages between morphologic and behavioral attributes of tissues with implicationsfor self-assembly, growth, healing and self-reproduction of man-made structures.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	ddssup0203
id	ddssup0203
authors	Kovács, L.B., Kotsis, I. and Dobosy, A.
year	2002
title	A Generic Support Module to Site Planning with Road Access
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	The aim of this paper is to present a generic module providing several support functions for site planning. The site will be composed of several building lots in harmony with each other and the surroundings. The site plan should satisfy the goals, conditions, rules and regulations explicitly orimplicitly indicated by the design brief. The maximum size and the placement area for the building on each of the lots are part of the plan. Proper road access should be provided for each of the building lots.A variety of ideas and patterns are used to create unified groups of building lots subject to certain restrictions on size, form and other attributes of the composition. Two basically different approachesfor the road planning will be compared. One of them is space planning first with some preconceptions on the structure of the road network, followed by the actual road formation. The other one starts with planning the road access first - provided that the site is properly divided into subareas. In the second phase of this approach the building lots are formed on each of the sites created by the road network. In both approaches several iterations might be necessary. A logic programming prototype with Prologimplementation is presented. Connection to earlier support modules and ideas for an integrated support system are outlined.
series	DDSS
last changed	2003/08/07 16:36

_id	8e1e
authors	Krawczyk, Robert J.
year	2002
title	Experiments in Architectural Form Generation Using Cellular Automata
doi	https://doi.org/10.52842/conf.ecaade.2002.552
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 552-555
summary	These experiments are based on previous work in developing cellular automata in three dimensions and to suggest architectural forms. Current research is extended by including explicit architectural considerations, such as, individual space units, supporting structure, floor plates, and the development of an envelope. A basic spatial shape is demonstrated in both linear and curved configurations. Also included is a discussion to not only explicitly use mathematically based concepts for form generation but more importantly their interpretation into architectural forms, as well as, the concept of considering architectural elements from the very start of the generative process.
series	eCAADe
email
last changed	2022/06/07 07:51

For more results click below: